There are a huge selection of paints and varnishes. In this manifold, even a professional is easily lost. The article discusses the choice of paint for wallpaper and painting methods.

What is the paint for wallpaper?

Qualitatively glued wallpapers for painting can be painted any modern paint used for walls. Water-soluble paints are often used, i.e. Such water is used as a solvent. They practically do not smell, drier quickly, using special bases and additives, paints provide a wide range of consumer characteristics. Divided into acrylic, latex, polyvinyl acetate, water-emulsion and water dispersing. Each species have pros and cons.

• Acrylic. Basic component - acrylic resins. Form a wear-resistant moisture-resistant coating in the sun. The most expensive among water-soluble paints.
• Latex. Produced on the basis of latex. Create a durable washing film of the coating, have good wear resistance, however, exposed to burnout. Also, the film hides small surface defects.
• Polyvinila acetate. Also called PVA paints are also produced based on PVA glue. There are fewer species, almost non-fatty.

Not so long ago, specialized paints appeared on sale, such as Dulux Easy, allowing to paint absolutely any kind of wallpaper.

They are divided according to the degree of gloss on matte, semi-wax, semi-man and glossy. Most of the paints are sold white, various shades can be given with the help of special pulling makeups or smoked when purchasing, selecting the shade in the directory.

What wallpaper can be painted?

The modern industry offers several types of wallpaper specifically designed for painting different from the usual lack of printed pattern. They are divided according to the material on the linker, glass windows, phlizelin, vinyl and paper.

Linker

Linker is a coating for walls with a strongly embossed structure, made by applying a special mass of natural materials to the tissue or paper base, for example, wood flour and flaxseed oil. The drawing often imitates stucco. Due to the strong relief, it is difficult to score with rollers, it is recommended to paint with a kraskopultum. It has a dense structure, wet cleaning is allowed. You can repaint several times.

Glass equipment

Produced from fiberglass. The fiberglass threads are intertwined in a special way to obtain figures of different textures, then impregnated with a special composition for giving stability, usually a mixture based on modified starch. Advantages and features:

• Do not burn.
• Do not support burning.
• Easy wash.
• Due to the woven structure, air circulation does not interfere.
• Multiple repainting.

Fliselinovye

Fliselin is a nonwoven cloth based on cellulose bonded by a special polymer. Due to the special structure of fibers, phlizelin wallpapers have various textures, including volumetric. However, smooth wallpaper for painting is also widespread, stitching which, you can do without time-consuming finish putty.

Vinyl

With a vinyl coating applied to the front side. More functional than simply fliseline. You can repaint up to 10 times.

Paper

Wallpaper Painting from paper is different from the usual lack of drawing and multi-layered. As a rule, it is 2, less often 3 layers of paper glued together. A filler can be located between the layers for making an invoice. The least expensive of all wallpapers for painting, however, the most "capricious" during operation are afraid of mechanical damage and moisture. Very uncomfortable when gluing, because The glue is applied to the cloth, which turns and can sprawle in the hands.

How to paint the wall, covered by wallpaper

The variants of staining of walls, plated wallpaper, differ depending on the area under painting, the variant of the selected composition and the method of the blasting - the brush or the paintopult.

How to choose paint

Depends on the purpose of the room in which the repair is made. For example, in the kitchen or in children, it is important to use the washing paint, allowing frequent wet cleaning and resistant to detergents, in the corridors of public buildings - having high wear resistance, in medical institutions - special paints with antibacterial effect, etc. Rules for choosing paint for wallpaper and when choosing paint for covered walls are the same.

What roller paint

The roller can use any, but the manufacturers of paints recommend using fur or velor with an average pile (6-10 mm) for this type of work (6-10 mm). For an additional decorative effect, a factory roller can be used to apply the second or third layer of the primary shade, or to apply a layer of another color.

How many layers of paint will need

It is usually enough 2 layers, but, for example, when painting in light pounds of a dark base may be required to apply 1-2 additional layers.

Phased guide

For painting the walls will need:

• Roller (180-300 mm, the wider - the better, however it is important that the roller is comfortable to hold).
• A narrow thin roller or brush to drive corners.
• Painting bath with a special roller rolling surface.
• Facade spatula width of at least 250 mm.
• Malyary Scotch.
• Mixer for paint.
• Capacity for stirring paint if independently plated is planned.
• Wet rag.
• Broom or vacuum cleaner.

First of all, it is clear the base from dust by a broom or a vacuum cleaner.

It is necessary to carefully check the quality stickers of wallpaper, special attention is paid to the seams.

Poor cursed seams will disperse when drying paint. Detected defects on the wallpaper are recommended to sharpen with a putty on a wood or acrylic sealant. Seams can be put on the paint, which will be painted.

Paint should be thoroughly mixed. It can be slightly diluted with water.

If the paint is for yourself, it is necessary to scroll immediately all the necessary paint volume in one container to avoid difference in shades.

Initially, the angles are stained with a narrow roller or brush, then a wide roller is the main plane of the wall. It follows horizontal movements with the maximum possible amplitude, without changing the pressure on the roller. The roller movement speed is chosen by the experimental way, quickly enough to avoid the flows, but at the same time so that there is no spray. While painting one wall it is recommended to avoid pauses. If the bands were bad or sticky - apply another layer.

It is recommended to paint a piece of wallpapers, wait until the paint is driving, attach to the surface that is planned to be painted and see how this shade will look like on this wall. You can also smoke in the store a small jar of paint volume in the selected shade, and look at the place.

If the adjacent plane fails to be sealed with a painting tape, for example, when the base is weak to protect the surface, the facade spatula is used. The blade of the spatula is installed in the angle, the plane is tightly pressed against the protected surface, the desired area is neatly painted by a narrow roller or brush.

In, as in any other construction work, there is nothing complicated, but the accuracy and adherence to the manufacturer's recommendations are important.

Useful video

Wallpaper under painting - the dream of any designer, the discovery for the builder and the find for many owners. These coatings make all subsequent repair work with an easy task that do not require large monetary and time costs, because they can be repeatedly painted and at the same time not to perform complex surface preparation.

Features

For many reasons, more and more people decide to glue wallpaper, which can be repainted in the future. This repair is now at the peak of popularity. There is nothing surprising in the fact that it is this decorative material that became the hero of our conversation. Why in the room is worth sticking the wallpaper intended for staining:

• soundproofing;
• creating a cozy atmosphere;

• a large selection of designer solutions that can be embodied;
• organization of protective coating on the wall;
• large assortment of textured solutions.

How many times can you repaint?

An important advantage that is characteristic of such wallpapers is multiple painting. The number of staining may vary within 10-15 times.

The coating with a pronounced embossed pattern is not recommended to paint too often. The drawing with each staining will be smoothed and from the relief can not stay anything.

It is better to carry multiple staining smooth wallpaper and fine-focus coating. The material itself in both cases does not suffer from frequent dyeing.

What kind of varieties?

Not all wallpaper can be used under the color - it must understand everything well. Even those canvases that are intended for staining differ significantly. You need to fit consciously, with knowledge of the case. We will tell you how materials are called what features you need to navigate, as well as introduce the distinctive characteristics and reveal important secrets. Consider in detail what wallpaper can be used for staining:

• Paper Wallpapers are attracted by affordable, so many choose such an option to apply pigment. This solution has the right to life, but only if two-layer wallpapers are selected. Due to high strength and reliability, decorative material will be able to withstand the process of staining. It is not worth conducting such experiments with single-layer materials so that it does not have to elap the walls again.

• Liquidwallpapers can be painted, but you need to carefully select the color and be able to combine different shades. The main problem is to translucent the color of the material through the pigment layer. Drawing paints with a thick layer is not a decent solution, because in this case the texture of liquid canvases will be hidden, and the walls will be ordinary, smooth.
• Vinyl Materials Though are created on a paper basis, but are more durable than simple wallpapers. They are much better to carry pigment. The assortment of vinyl materials has a category of washable models. Such wallpaper paint is categorically impossible, since it will not be possible to get a normal result. The paint will not be absorbed or at least linger on the surface, so it turns out the divorces and drips.

• N. Options a fliseline basisbest is suitable for changing the color by applying pigment, which is why they are most often selected. Moreover, surfaces with such a finish can be repeatedly repainted - there will be no negative impact on the wallpaper. Even the old flieslinic canvas can be simply repainted, which allows to significantly save on repair.
• Glass equipment - Another successful option for our case. But they are less likely to choose the user, because they have a high cost. But their reliability and durability justify all costs. This type of coating is created specifically for staining.

Special wallpapers, intended for painting, strongly won in front of ordinary decorative materials.

They can be used as a ceiling finish, and they are produced in a large assortment: simple, ceiling, vertical, exclusive, with different characteristics sets, textured.

What to glue?

The process of sticking wallpaper determines the success of the entire venture, so this process needs to be approaching, to comply with the technology and adhere to the rules. The global technology differs depending on the type of wallpaper selected. In order not to worry, whether the wallpaper is well accurate, these rules of application must be observed:

• Paper cloths do not need impregnation, the adhesive composition is applied directly to them.
• In the case of vinyl wallpaper, which have a paper foundation, impregnation is needed. The adhesive composition is applied on top of the canvas and left to absorb the time that the manufacturer indicated.
• Gymelomes do not need to be smeared with glue. They are applied to the wall dry, and the glue is applied to the surface.

To keep the wallpaper on the walls qualitatively and firmly, you need to learn to choose glue. This issue should be focused on weight and density of cloths:

• Light paper wallpapers can be glued with a composition that is designed for lightweight webs. Its foundation is methylcellulose.
• Heavy wallpapers will not hold on this composition. For them, more reliable and durable adhesive material will be required. For example, glue based on PVA.
• A special composition is designed to work with glass.
• Wallpaper can be glued onto the water-making paint, but only fliseline. Previously need to carry out an experiment on a small piece of web. If it grabbed well, it means you can use a similar method for the rest.

You also need to familiarize yourself with some selections of sticking wallpaper under painting, which will allow you to get the perfect result:

• The base does not need careful alignment. Of course, big irregularities will have to be eliminated, but small shortcomings can be left. Moreover, it is permissible to choose a half-one paint that will hide the drawbacks. The surface should be in one color so that the new finish is applied evenly.
• An old coating from water-level paint can not be deleted, as it is a good basis for a new finish.
• Water dispersive paint can also be deleted.

• It is impossible to apply a new decorative layer on the oil paint. It will have to be completely removed from the surface.
• If the drawing is present on the wallpaper, then it will have to do a length of cave 5 cm. This stock will allow you to combine coatings and make a piece of one. Wallpapers that will be covered in the future should be stuck on the joint. If there are places with the allen, then the paint will equally allocate and will poison attention on these shortcomings.

What to paint?

If the choice is made incorrectly, the wall decorative layer will not be quite strong, beautiful, durable and resistant to external factors.

The construction market presents the following paint.

Water based

Such formulations are leading on sales. It is easy to work with them, they are inexpensive, the assortment is impressive, including not only colors, but also the texture (matte, glossy). Matte compositions look on the wall attractive and capable of hiding minor surface flams.

Gloss looks more solemnly, but it is worth it solely on the perfect wall that does not have the slightest flaw. With water-making paint compositions, you can easily find the desired kel. To accurately guess the desired shade, you need to make trial strokes and evaluate the result.

Latex dispersion

Such paints benefit from ecology and security. Such a composition must be quickly spent, since a few hours after opening the package it dries. Although the painted surface will dry about 3 days.

Magnetic

Not so long ago, the modern building materials market began to offer magnetic paint. After it applies to the surface, magnets will be pester. First of all, such a decision will be relevant in the design of children's rooms. In addition, in any other room, you can select the wall area for location of small decorative elements on it, which will be attached on magnets.

Such paint is produced in a limited color scheme, yes, the caller is impossible. Let the flag in such compositions are not added, but the layer of decorative composition of the desired shade is easily applied on top of the dried magnetic paint.

Alkyd

Such paints are expensive, but reliable and durable. Such compositions cover the walls that are in conditions of intensive operation and are subject to rapid wear.

Alkid formulations are relevant to use for shopping facilities, public places and manufacturing workshops.

Paint can be applied with a brush. At the same time, traces from such a tool on the dried surface will not remain. This paint is warmly sensitive and even flammable, which is necessary to consider when repairing.

Acrylic

Acrylic compositions are not less popular than the materials described above. The range of similar paints is huge, starting with the area of \u200b\u200buse (for facade work or internal) and ending with various textures.

Oil

Similar compositions use for painting wallpaper cannot be used. Paints with solvent are especially banned. Such substances negatively affect wallpaper.

The choice of paint should also be based on the type of wallpaper, which are placed walls. This moment is important, because everyone wants to get high-quality and durable:

• Paper materials and glasses are better to handle latex compositions that do not have a pronounced effect on the basis. Also for wallpapers with paper base are well suited for water-emulsion paints.

• For phlizelin wallpaper, latex formulations can be selected or use acrylic paint. The last option is more affordable. Experienced builders cover the painted surface with varnish, due to which the decorative coating becomes moisture-resistant and immune to the conditions of intensive operation. After such processing it becomes impossible re-staining.
• Acrylic compositions are designed for vinyl canvases.

If it is planned to make a textured surface, then multi-layer staining cannot be used. In this case, the texture of wallpapers will be smoothed. For coloring, painting materials are chosen on the ceiling, the principle does not change. For whatever material you do not choose, you need to choose high-quality coloring compositions. The desire to save can lead to negative consequences, and the result will be far from the expected.

Color solutions

The use of calpers when painting wallpaper is a popular trend that is actively used by experienced builders and beginners. To obtain the desired shade, the kel is added to white water-emulsion paint or mixed with acrylic compositions.

The color is a rich pigment, which allows you to change the shade of liquid wallpapers and the coloring composition for finishing the canvas.

It will be difficult for an inexperienced person to work with these compositions, but still such a process is quite performed. You will have to spend a lot of time until the desired shade is obtained.

Do not be afraid to experiment.To begin with, you need to take a small amount of paint and add a spherical portion. As soon as the desired combination is obtained, you can take a large volume of coloring material. Tint should be constantly checked on an unnecessary segment of the canvas. In this case, you can clearly see the future result.

If there is no desire to experiment, risk and spend time in search of the perfect shade, you can use the computer tinting service. The special program will carry out accurate calculations and give the desired amount of the coller, which will allow to obtain the desired shade.

So that the room was not only original, but also harmonious, it is necessary to carefully consider the future interior. All matters: drawing on the wallpaper, their texture and shade. The market of such coatings is overflowing, so you can easily find the appropriate option in which all the wishes of consumers will be embodied. Think well on the texture of the decorative coating: the pattern will be your wallpaper or more successful will become a smooth surface. Textured wallpapers can be with flower, with imitation of brick, stone masonry, with a geometric pattern.

When choosing a shade, you need to focus on the type of room and the features of its use:

• Children's roomrequires the choice of pastel and calm shades. For girls, you can choose peach, pink, beige, cream paints. The boys will suit blue more, although many tones are universal. Children's dreams are embodied in the new form of wallpaper. They are embossed, made in the form of a large coloring. For a small artist, such a decision will have to taste most, because he will be able to do the design of his room. The main thing is that at hand there are always bright, colored paints.

• For registration office premises Frequently selected wallpaper imitating natural materials. Bright and dark shades in this case are excluded, for example, the red walls will not create the necessary, working atmosphere.
• In the bedroom You can choose smooth wallpaper, and decorative, small texture is allowed. For the tinting it is better to pick pastel colors, although the dark shades can look beautiful if a decent paint ensemble is created.

• For registration bathroom Well suits volumetric textures in wallpaper and dark tones in the clearing. If you need to visually expand, you need to use coatings with fine white pattern.
• Living room Provide the will of fantasy. Here you can embody bold ideas, for example, combine two colors. If one wall is painted with one tint, and the other surface is painted in another, the space will visually expand, and the room will turn out to be divided into functional zones. Combined, with a sense of style and tact, you need to choose the colors so that they are combined with each other and created the desired atmosphere.

The existence of different paint application technologies allows you to get different results. For example, if you apply paint on the inner side of the canvas, then the shade will be soft and unusual. You can also combine two colors on relief surfaces. To do this, you must apply one layer, wash it off from the protruding pattern and paint into another color with the help of a foam roller.

Wallpaper for dyeing is a designer dream. You can create original interiors with them, embody bold ideas and repaint walls with minimal investments.

Procedure for performing work

You can paint the wallpaper with your own hands in the apartment. Moreover, it is quite simple. The whole process is described below, it is divided into several stages. Adhere to this plan and the color of the wallpaper after sticking will pass as smoothly as possible. The coloring layer can be applied only on a well-dried surface. First you should stick, then the surface is left for several days to dry. Only after that you can move to staining.

Surface preparation

At this stage, it will be necessary to clean the work surface, protect the floor, windows, elements of the heating system from possible droplets of the coloring composition. On the surface there should be no contamination and pathogenic microorganisms. The wall should be not only clean, but also dry. Consider what not all wallpaper can calmly survive wet cleaning. Plinths and places of contact of walls with a ceiling must be protected by painting tape.

Before the wall pattern sticker, you need to turn off the power supply of the power grid, disassemble the sockets, switches and close the wires with polyethylene.

Primer

Prix \u200b\u200bwallpaper before they are painted, it is necessary. Such processing technology will reduce paint consumption, reduce the likelihood of divorce formation, strengthen wallpaper fiber. To do this, it is necessary to prepare a wide roller, brush, pallet and material for applying. It is better to use latex primer material. It will additionally provide protection against moisture.

In the pallet, the primer is poured. You need to be able to properly recruit the briber. Its too much of it is not required that there is no outers on the wall. The roller dips into the solution and the extra material is shaken from it. The primer must dry. As a rule, it takes up to 12 hours.

Collot

It has time to give the desired shade to be painting. Similar actions should be carried out once, since in the future it will be recreated an accurate shade will be almost impossible. Pigments are produced in a different form. Most often there are dry and pasty options. Preparation of dry pigments is in water dilution, and the paste can be immediately added to the coloring solution.

Selection and preparation of the instrument

It is necessary to prepare the instrument in advance to be used in the process of paint. You can perform this work in three ways: with the help of rolics, brushes and paintopult. The last option is preferential, but this is a professional tool, work with which requires skills and experience. But the result is better and better, and the wallpaper retain their integrity.

When choosing a mechanical method at hand you need to have a roller and a brush. The first tool will be used for the main work, and the brush will allow efficiently to process hard-to-reach places. Roller must have a natural pile. Select the foam tool is permissible only for the processing of wallpaper with deep-embossed texture.

Apply the coloring composition to the surface is necessary for a thin layer. There should be no influx, divorces and other flaws on the wallpaper. A thick layer cannot be applied at a time, since it will not lead to a good result. With alternately applying the parsing composition, small flaws will not be visible and you can count on a qualitative result. Applying each next layer is possible only after the complete drying of the previous one. This rule refers to all cases and disrupt it is categorically prohibited.

Coloring should be carried out in opposite directions. The latest roller movements must be directed from top to bottom. In this case, the repainting is not required, since the coloring composition will fall uniformly. This will help avoid divorces and create the correct visual effect.

From the roller you need to shake the surplus paint so that they do not turn into the sublifting. If the switches still failed to avoid, then we will correct the situation. In this case, you need to grow paint with a dry roller. It is necessary to process the surface, so that in the future it is not needed to repaint the surface.

Work begins with space near the ceiling and plinths. It is necessary to provide equal effort on the roller and monitor the uniformity of paint. When the whole surface is painted, you need to leave it for complete drying. Its time depends on the type of paint selected. This information makes the manufacturer on a car with coloring composition. Also on the duration of drying are influenced by the environmental parameters. After fixing the first layer, it is necessary to apply the second (in the same way).

Using stencils

There are different ways to apply paint and the incarnation of interesting solutions in the interior. Stencil is a unique option that allows us to turn the usual room into a unique space with an exclusive design and unusual design. Stencil can be made with your own hands or buy ready. It can be created from different materials: dense cardboard, metal, plastic. To glue such elements to the surface can be used with greasy tape or spray-glue. In this case, they are easily dug and do not leave on the surface of the traces.

Open windows when painting and it is impossible. Temperature should be saved at one level. A pavements and a sharp change in microclimate parameters are not allowed.

The smaller the temperature will be, the better the drying of the paint will pass.

Options in the interior

We have repeatedly talked about how beautiful the design of the room is obtained when using wallpaper for staining. It's time to make sure that. We have selected options for using painted cavities finally dispel doubts and separate inside the irrehable desire to apply this particular decor.

This photo is a successful example of a combination of two colors in one room. One of the colors is bright, and the other is neutral, which is recognized as a faithful contrast decision. They do not compete with each other, but complement and allocate the benefits that are peculiar to each of them. In this case, the hallway smoothly goes into the living room, and the idea of \u200b\u200bzoning is well implemented.

It often happens that the color of the walls is bored, and there is no money for a new repair. In such a situation, good paint will help for wallpaper, because many types of cloths can be painted. There are also special materials under painting, including ceiling - on a flieslinic basis, vinyl, glassy.

What walls can be painted - list

Choosing a type of wallpaper during repair depends on many factors - budget, availability of experience, color scheme, evenness, smoothness of walls, type of room. For example, in the bedroom for adults it is quite possible to apply paper wallpaper, because the intensity of the use of the room is small. In the children's room, paper wallpapers are also popular due to environmental friendliness, although it is better to choose more durable fiberglass canvases. The walls of the living room or hallway should be accumulated by vinyl or phlizelin - such materials are more durable, they are difficult to scratch.

Most of these wallpapers can be repainted with their own hands. Modern paints are suitable for staining of bare walls, ceiling and wallpaper. If the walls have an old coating, its painting will have a number of advantages. The structure of the wallpaper is embossed, which allows you to hide small wall defects, which inevitably appear over time. The color of the paint will look more interesting than on the walls without wallpaper, is achieved at the expense of the game of light on the convex surface.

Paper wallpaper

Paper-based cloths are the simplest and inexpensive. These indicators are not the highest, therefore it is better to choose options with impregnation or immediately cover the walls with varnish. But the gloss will visually allocate defects, and it will be very difficult to remove the old cloth after varnodes. Therefore, it is worth buying embossed wallpapers. Their operational properties are better as decorative - in appearance they resemble expensive fabric.

Single-layer paper canvases can be painted once, and only after using water-repellent primer. Ordinary two-layer wallpapers - no more than five times. If the material has an inner layer of wood fibers, it can be subjected to re-staining to 7-8 times.

Vinyl wallpapers

Such canvas consist of two layers. The first - foamed vinyl, the second - polyvinyl chloride, applied by a deposition method. Externally, such material is very beautiful - embossed and soft. Vinyl wallpaper can be painted up to ten times, they do not spoil from frequent color shift.

Even more resistant to drawing a painting wallpaper of two layers of vinyl. They repel moisture, durable, it looks like a tile. Most often, such canvases are glued in the kitchen, where frequent washing is required. Another option of vinyl wallpaper is silk screen, here the upper layer additionally contains silk fibers. You can paint such wallpaper, but the embossed surface will smooth slightly.

Fliselinova wallpaper

Fliselin is a nonwoven material of two types of chaotic cellulose and textile fibers. This layer is the main one, on the inside of the wallpaper there is a paper or vinyl. Fliselin is washable material, but if there is a paper base, it can deteriorate from frequent water from entering.

Flizelin wallpaper is easy to repaint, it is possible to change the color to them up to 15 times. The fact is that Flizelin is very elastic, therefore not subject to shrinkage. Painted canvas with original embossed or knocked out, volumetric pattern.

Liquid wallpaper

This material consists of several components - mica, cellulose, glue and dyes. It can also be white, without pigments. Before applying such wallpapers, you need to grind the walls. Next, the mass is divorced according to the instructions and apply a gun, a spatula. The coating is obtained without seams, it looks very beautiful.

Fully change the color of liquid wallpaper is impossible. Due to the strong absorption, the main shade will be bought on the surface and look strange. Therefore, you can only strengthen the base tone, make it by staining with darker. In practice, most specialists do not use painting of such material due to the loss of the desired relief, the original appearance.

Glass equipment

Wallpaper with the base of mineral material - fiberglass - it is possible to put painting, the risk of spoil the material is not. The fibers in the wallpaper are interconnected by heating the glass, because the final product will be environmentally friendly, non-combustible, safe for home use.

Even with multiple painting, the wallpaper will not lose relief and attractive species, in connection with which they are most often glued in offices, utility rooms or rooms with excessive humidity. If the subsequent painting is assumed, it is better to buy wallpaper on a paper substrate, and not single-layer, the first stronger.

Types of wobbly paint

The market is implemented a huge amount of paints - water-dispersion, latex and others. The correctly chosen remedy will help change the color of the canvase, make them more juicy, bright. It is always indicated on the paint, for what type of wallpaper it is suitable. Some LKMs are not suitable for paper wallpaper, others are optimal for vinyl. From manufacturers Popular Tikkurila (Tikkurila), Dulux (Deluxe), DYO, Oleet, Marshall, Belinka, Dufa, Tex. Paints are implemented in banks, plastic buckets with a volume of 1-50 liters.

Water-emulsion paints

Water-emulsion paint is the most inexpensive option for walls and ceiling. It is prepared on the basis of water, antiseptics, fillers, PVA glue, therefore, the water exchange is originally white and is subject to caller. There is a mass of caller grouped by codes (up to 1000 shades).

The advantages of the water disposal are:

• environmental Safety;
• the composition is odorless;
• the ability to apply for finishing any premises;
• the presence of matte and glossy options.

The disadvantage is dismissed to the action of water - when processing a wet rag, paint is erased. After such a procedure, you will have to apply a new layer, otherwise the wall will remain faded, in stains. Another water-emulsion will quickly burn out. On the walls that are susceptible to the influence of the Sun, it is worth noting a different paint material. But for decorative plaster, the water-level paint is suitable, it allows you to emphasize the relief and original basic decor. It is only necessary to remember that after drying the color will be a little lighter than initially.

Latex paints

This type of paints is the most expensive, but quality is at the height. After drying on the walls there will be a luxurious coating, silky, very pleasant to the touch, smooth. Latex (synthetic or natural rubber) will give the surface with good moisture resistance, the mud and dust will be easily removed from the walls. There are no harmful components in latex paints, so they can be used in children's rooms, other residential premises. The flow rate of 1m2 is small, the paint is applied by a thin layer, which after drying remains breathable. Latex based glossy paints are very durable.

They have cons. In addition to high prices, it should be noted that not the whole palette of colors is suitable for wallpaper. Latex does not allow to achieve too bright shades, he "loves" only muffled, pastel tones. It must be taken into account before starting repair. Also, the paint can smell a little, although the smell is not very sharp. Another minus is a drying rate. It will be necessary to work quickly to prevent flushes and noticeable transitions.

It is best to paint fiberglass or fliesline with a bulk surface. The color range of such materials is rich, but you can spawn white paint immediately into the desired shade. Full drying of the wall will occur already in 2-4 hours, you can use the room immediately.

Alkyd paints

In contrast to previous options, alkyd paints contain a mass of harmful components - synthetic resins, oils, solvents. They are far from health, therefore, to apply the LKM to staining the wallpaper is permissible only in a non-residential room. Long-term finding in such a room can cause poisoning, and it is not worth experimenting with your own security! Also alkyd paints fire hazardous, which strongly limits their area of \u200b\u200boperation.

But alkyd enamel is still used for repair work. They are saturated with shades, they can even draw along the wall or wallpaper. There are glowing, pearl paints that look original after drying (usually used for external work). Also alkyd paints are very racks for damage, serve several years without loss of external attractiveness and protective properties. They do not harm the high humidity and the effect of ultraviolet. The composition has antifungal supplements, and wallpaper rotting will be excluded. The price of alkyd paints is one of the lowest.

Acrylic paints

This is the most popular variant of staining of walls and wallpaper. Acrylic is harmless to the body, like other components. Acrylic paint is used in any premises, including wet. She will not be able to smell unpleasantly, because it does not allocate evaporation. Material moisture resistant, while vapor-permeable, dries per day. On the surface painted by an acrylic agent, the fungus will not be charged, the wallpaper is not deformed. After drying, the canvas can be washed without harm to the coating.

Acrylic is suitable for all types of wallpaper, but on paper the amount of paint should not be too large due to possible weighting. Perfect paint for phlizelin. Applying fiberglass, it is necessary to pre-prepare the walls - to carry out the wallpaper. Painted, they will look very brightly, which benefits the material from the list of analogs.

Coating options

In addition to color, before buying you need to evaluate other effects created by paint. Most often, users choose frosted coatings. In the house, apartment such funds create a cozy atmosphere. They absorb the light, so they are more suitable for large premises.

The semiam and semi-man paints are ideal for bedrooms. Their ability to reflect the light is moderate, and the desired level of lighting will be reached in the room. Glossy paints strongly repel the light, they should be applied in small rooms located on the northern side. But the walls must be completely even, otherwise all defects will become noticeable.

There are also pearl paints on sale - they change the tone depending on the lighting. The walls are best looking at a scattered light. LKM with sparkles give the effect of overflows, glare, perfectly combined with additional floor and wall lighting.

Color spectrum

By pulling, you can choose almost any shade for the walls. Keefs are introduced into white paint according to the buyer's desire. You can choose the desired tone on the paint code using a special computer program. Also create color is quite possible with your own hands when mixing different shades. Tinting manually undesirable, because it will be difficult to repeat the result. The new portion of the paint will surely become lighter or darker. In addition, it is thoroughly mixed with hands. A large volume is difficult, most often there are accommodation and non-crushed plots.

As for the choice of color for wallpaper, one can be guided by such advice:

• blonde tones are bought for small rooms, beige and other pastel shades look at the best;
• it is permissible even in small rooms to apply individual bright accents, drawings, screen images, a different decor of contrast tones;
• in large rooms, you can use any tones, even dark, while it is better not to overdo it, otherwise the room will look gloomily;
• for the harsh northern side, yellow and peach tones are usually chosen, which look warm and bright;
• it looks beautiful, the decoration of individual sections with gold, silver and graphite paint.

Calculation of the number of LKM.

To properly determine the amount of paint for repair, you need to immediately make a choice in her mind. On average, about 250 g is consumed per square meter of material, but the consumption may vary depending on the hygroscopicity of the wallpaper. Here are the other factors that must be taken into account during the calculations:

1. Quality of preparatory work. If with the processing of the surface, flaws are allowed, the flow increases. So, without primer the walls, the paint absorbability increases by an order of magnitude, and desire to save, you can achieve the opposite.
2. The type of paint and its suitability for a specific type of wallpaper. Some materials are universal, others are suitable only for a specific structure of the canvas.

Lower consumption is obtained for dense vinyl wallpaper - 150 g / sq. m. If they are projected, saving will be up to 100 g. Paper wallpaper can be treated with diluted glue, after complete drying to start painting. To calculate the LKM, it is necessary to measure the area of \u200b\u200bthe room, multiply by consumption, while buying a material with a margin. The exact data is usually indicated on the PCM packaging.

Tools for painting

Paint should be applied using a painting roller. They are easy to work, while the area of \u200b\u200bcontact will be big. Roller with a long pile is best painted fibly. Foam rollers are not suitable for relief wallpaper, they are good only for smooth paper material. The size of a small roller for narrow sections is 10 cm, the big one should not buy less than 25 cm.

Paint brushes apply only for staining of hard-to-reach places where the roller is not reached. These are the corners of the room, joints, overlap. Also on sale there are screen rollers that allow you to apply a drawing on monophonic coatings.

Still for work will need such devices:

• painting tape for shoaling of jambs, doors to not blur with paint;
• kyuvet (tray) greasy - a container with a corrugated bottom, where the roller is pressed;
• building mixer, drill with a nozzle - need if the paint tinting is carried out independently;
• the paintopult is usually used by professionals for paint on large areas.

Also, for individual protection, the respirator will be required, headband, gloves and special tight clothing.

The process of painting wallpaper

The best result in staining can be obtained if the wallpapers are pasted with jack, and not a mustache. Before starting work, it is important to prepare:

• bring furniture and stuff from the room;
• dirty stains on the wallpaper lined, if possible, wash the old web (otherwise the paint will fall unevenly);
• the floor is made with a film or newspapers, plinths and other non-painted elements to stick with a painting ribbon;
• stir the paint to homogeneity, even if it did not extend;
• pour some paint in a special tray specifically designed for this.

For painting, the roller needs to be omitted in the LKM. Then roll along the ribbed surface of the tray to distribute the paint and press the surplus. Wallpaper staining starts with the upper corner part of the wall, which is closer to the window. Rolling on the wall moves from below-up. Subsequent bands are applied with overlapping the edge of the previous ones. Zones at the plinth, other complex areas are scorched by a brush. After complete drying of the first layer, you can perform the second, although it is optional.

In addition to staining, you can additionally protect the wallpaper with a colorless varnish. It will seriously increase the service life and will save color for a long time. You can also apply different patterns using a screen roller or manually by applying templates.

Drying time

The drying period of paint on the walls depends on many factors:

• the porosity of the base - on the embossed wallpaper LKM, dries longer;
• temperature in the room - at + 20 ... + 27 degrees paint dry faster, but if it is hot in the house, the composition can be strongly diluted;
• humidity - more dry air contributes to the speedy drying;
• good ventilation - air circulation (with the exception of drafts) helps to dry the walls;
• layer thickness - the thinner the paint is applied, the sooner it hardens;
• type of paint - water-based materials dry quickly.

Most of the paints dries in 2-24 hours, but the re-layer should not be performed earlier than 12 hours later. Oil compositions dry about two days, but they do not apply for painting wallpaper.

Causes of paint cream

It happens that the paint begins to peel, crack after drying. This can be observed in violation of the staining mode - if the second layer was applied to the wrong first. Also, the shower of paint is observed in the inconsistency of the old and new coating, if there was already a layer of other paint on the wallpaper. For example, the application of an acrylic composition on a water-emulsion can lead to a substantial result.

Whether repeated covers are possible

To paint the wallpaper for the second time permissible. Moreover, modern coatings are withstanding several staining without damage to appearance. So, glass windows and durable phlizelin - up to 15 times. But there are restrictions. For example, a relief pattern on wallpaper usually paint no more than 5-7 times, then it will be strongly blurred. It will not be possible to apply a light paint over 2-3 layers of dark - the final tone will be ugly.

Before re-painting, you must make sure that the old coating is kept tight, there are no peeling zones. Otherwise, it is necessary to sand a good base, primed and only then start working.

Features of staining wallpaper on the ceiling

For work on ceiling coatings, a paint roller or a paintopult is used. Also required a stepladder of the desired height. It is possible to proceed to paint immediately after drying the wallpaper glue. Old wallpaper must be pre-cleaned from dust, remove contaminants.

For painting buy LKM water-based. Oil compositions, solvent paints do not apply, most often experts advise to choose acrylic compositions. To create the effect of volume, paint is applied, and then rub it with a rag. You can also paint the canvas before sticking (for convenience). In general, the process of coloring is similar to that on the walls and does not represent complexity. With the right approach, it will certainly be obtained a great result and the room will play with new shades.

Before each who decided to repair, the question of which "wear" walls is inevitably. In this case, becomes a stumbling block. How to guess with texture, pattern and color scheme and also save? This finding in this case will be a painting wallpaper. Such a coating will last up to 20 years, appropriate in any interior, and you can update or change color if you wish every six months.

Types of wallpaper in painting and their features

Wallpapers for painting, as a clean artist's cloth, provide space for the embodiment of the most bold creative ideas. After painting, they can become an accent of the interior or successfully emphasize it with color and texture. In order for everything to work out how conceived, it is important to choose the right basis for the future masterpiece.

Wallpapers for painting have different base material and texture

Wallpapers intended for staining are wider than normal and much longer, two-three rolls are enough to pasting the middle room. Trade offers a choice for any demand. In order not to make a mistake, you need to take into account the main characteristics of the coating.

Material of manufacture

There are three types of wallpaper under painting:

• paper;
• fliseline;
• fiberglass.

Paper consist of two layers impregnated with moisture-repellent composition. They are inexpensive, easily glued, but are short-lived and in density are inferior to other species. The resistance to abrasion is also lower.

Fliseline resistant to stretching and rupture, do not appear. The structure of the base is porous, passes the air, due to which the walls "breathe".The fliesline base is applied with a foamed vinyl pattern, so they are also called vinyl.

Their density is higher, and it allows you to hide small defects and irregularities of the walls - there is no need to carefully prepare the base before sticking. There are more expensive paper walls, but they will serve much longer, without losing their properties.

Fiberglass are made of fiber similar to glass. The most dense, wear-resistant and durable appearance, but also the most expensive. Well glued onto the wall, creating the effect of seamless cloth, hides all base defects. Pushes moisture and dust, fireproof and heat-resistant.

The features of the foundation must be considered depending on the purpose of the room and the microclimate in it.

1. Because of small strength, paper walls do not stand in a children's and hallway. But for the ceiling, they are quite suitable.
2. In premises with high humidity, it is also better to prefer fliesline or fiberglass.
3. The strength and wear resistance of the fiberglass base allow it to use it even for office and public premises.

Another important characteristic is a texture.

Texture

Most often, wallpapers are made with a convex pattern on the front side, but there are also smooth. Considering that she will serve a coating at least 10 years, choose the appropriate texture:

• smooth;
• small drawing;
• large pattern;
• fabric imitation;
• geometric pattern;
• floral ornament;
• floral pattern.

Take the area of \u200b\u200bthe room, its purpose, the interior and the color of the future coating. So, for the ceiling, a smooth base is suitable, with a small pattern or imitation of stucco. The spacious room looks a large pattern, the fabric imitation will create in the bedroom the atmosphere of heat and coziness, the geometric pattern is appropriate in the office, hallway or office.

The walls can be left and unpainted, it will not reduce the advantages of the coating. If the design implies color, approach the choice of paint responsibly.

Selection of paint

Paints are used for wallpaper paint:

• water-emulsion;
• water-dispersion;
• latex;
• acrylic.

Each type of wallpaper requires its paint:

• paper preferably painting with water emulsion;
• fliselinov is suitable for water-dispersion and water-emulsion;
• gymelocoes are covered with latex and acrylic.

Such division conditionally. It happens that phliselinic coats latex or acrylic paint or fiberglass stained with water-emulsion. The choice depends on the room.

1. Walls in the bathroom and in the kitchen it is better to cover latex or acrylic paint, it creates a waterproof film on the surface. Such a coating can often be washed, without fearing to damage.
2. Latex paint should be preferred for the open sun of the premises. It does not fade and retains the original color for a long time.
3. The water-level paint is washed off with water, this coating is not recommended.
4. Water-dispersive water is not afraid of the surface covered with it can be washed.

Different paints and reflective ability:

• glossy;
• half-one;
• matte;
• satin.

Each type of wallpaper is suitable for its paint.

Glossy best reflects the light, creating the effect of a mirror surface. With it, you can compensate for the lack of lighting and visually increase the small space.

Matte will make imperceptible shortcomings and irregularities of the surface, well visible when painting glossy paint. Misses too bright light, create a sense of softness and comfort.

Satin has a moderate gloss, similar to a silk or atlas. Usually used in the kitchen and in the bathroom due to its wear resistance.

You can buy the finished paint of the color you like or tooling white, this service provides any construction hypermarket. It is easy to do this and independently by purchasing a caloring paste. But cooking paint needs to immediately at the entire area of \u200b\u200bthe room, otherwise the shade will be different.

Before buying the required amount of paint, take a small amount. In painting a wall or a piece of wallpaper, you can estimate the correspondence of the color to your expectations.

What you need for coloring

Before proceeding with color, prepare the necessary tools and inventory.

• painting rollers;
• brushes;
• cuvette or paint bath;
• malyary Scotch;
• stepladder;
• rafting to remove splashes.

Before you start work, prepare the tool

Separately, it is worth talking about the rollers - this is the main tool in painting. They differ in magnitude and by manufacturing material:

• foam;
• velor (short pile);
• fur (with long and medium pile).

For simple coloring, two rollers will need: small and large. Little convenient to cry out the contour, the main work is large.

In order for the textured wallpaper to scroll through the entire depth of the pattern, it will take a roller with a pile of 1.5-1.8 cm. Turn only the drawing will help the velor roller with a short pile. For this purpose, it is possible to use the foam rubber, but it leaves the bubbles on the surface when staining.

Relief drawing is painted with a roller with a long pile

A brush is used to dye hard-to-reach areas, where the work of the roller is impossible. These are corners, gaps, plots behind pipes. It also scores the contour at the ceiling and floor.

Scotch will need to protect ceiling plinths, sockets, pipes, window slopes and so on. If the walls are painted in two or more colors, scotch tape denote the border.

Paint is poured into the cuvette or bath. The ribbed surface helps to completely impregnate the roller and remove the surplus paint from it.

Before pouring paint to the cuvette, put on her package. You do not have to wash off the bath after work.

What you need to know before staining

1. The painted wallpaper should be completely dry after sticking. Usually it takes 2-3 days.
2. The first time the coating is painted at least two times. The second layer is applied only after complete drying of the first, drying time is indicated on the paint packaging and is at least an hour.
3. Gymelocoes Before painting, it is recommended to brand, this information is indicated in annotations. Fliselin and paper additional processing is not required.
4. Remove all flags of fliesline wallpaper all traces of glue, otherwise the paint will be blown unevenly.
5. Consider that when staining in a few layers, the final color will be more saturated. Therefore, the first layer is recommended to do a little bit of next.
6. Paint should have a liquid sourceal consistency. If necessary, dilute the paint with water or solvent and mix thoroughly to uniformity.
7. The optimal temperature for painting works - 17-22 0 S.

Prepare everything you need, proceed to work.

How to paint: how to work

1. Release the room from overall furniture. If there is no such possibility, cover it with a film.
2. Puck your scotch all the elements that should not be painted.
3. Ship the floor with protective material.
4. Putting work clothes, headdress and gloves so as not to be laundered from paint.
5. So that there are no pile from new rollers on the surface, ride them in painting tape, the pork will remain on the adhesive surface.
6. Pour the paint in the cuvette so much so that it fill in the recess, but did not cover the corrugated surface.
7. Staining start top. Skin the circuit with a 5-7 cm wide width around the ceiling perimeter. Use the stepladder.
8. Ride a small roller in a cuvette so that it is completely soaked in paint. Surplus Remove the corrugated surface.
9. Skin the walls along the ceiling on the roller width.
10. Change the roller on the big, soak it with paint.
11. Color the walls from top to bottom with vertical movements. Try to apply the paint evenly, and not to impregnate the basis.
12. Purchase hard-to-reach places and space to the floor with a small roller and a tassel.
13. After drying the paint, apply the second layer.
14. Remove the splashes of the wind.
15. After working, rinse the rollers and brushes and dry them.

Ceiling design with wallpaper has its own characteristics. The canvas are glued perpendicular to the window line so that the joints are not noticeable. For the same purpose, they paint the ceiling with smooth lines along the canvases.

At first, the trigger is scoring the perimeter along the walls and the angles, then the entire surface rolled the roller. Start painting in the room from the ceiling, and then go to the color of the walls.

Paper wallpapers do not like excess moisture. When staining, do not soak their paint strongly.

Wallpapers give an infinite space for creative fantasy. Simple staining the possibility of this coating does not end.

Non-standard decoration of sailed walls

Wallpapers Painting make it possible to arrange the walls with several colors, apply gradient color, apply a drawing, highlight the texture and much more.

Selecting texture

Coloring technique allows you to highlight the drawing on the wallpaper, make it volumetric. You can do this in several ways:

Method 1

Suitable for flizelin-based wallpapers. As already mentioned, this type of foundations are painted and with an inside. Paint will be shifted from the front side and create a background for a convex pattern. The drawing is left white or painted with a velor roller with a short pile of a longer or light paint, but you can use another shade.

Method 2

Instead of inside, sometimes painted in a bright color wall under the wallpaper. The base is muffled the color, make it softer and allocate a factory figure. As with the first way, the drawing is painted by another shade or leave white.

Method 3.

Fresh-colored wallpaper is slightly wiped with a damp cloth, removing the paint from the drawing. It is necessary to act neat and without push. After drying wallpaper, the drawing is painted in another shade.

Staining in several colors

It is used to highlight one or several zones, adding bright accents, creating an intended style of interior or just for self-expression.

Combine colors on defined rules:

1. The combination of related colors (lilac with gray, mint with blue and others).
2. Gradient staining, that is, different shades of one color from intense to pale or vice versa.
3. Sharing colors with a combination of contrasting shades (red with green).

To create a harmonious contrast will not prevent the knowledge of color. If this is not your strength, follow the rule: use only those combinations that are found in nature and do not combine more than two colors.

You can combine colors vertically, horizontally or diagonal - the choice depends on the target set. For zoning, a vertical combination is used, horizontal or diagonal is often used to implement designer ideas.

Zoning

This technique is used to highlight several functional zones in one room. For this purpose, a combination of saturated color is used with a softer shade - gradient.

Staining of walls in different colors gives the room uniqueness

Will one of the walls of another color or all the walls of different shades depends on your interior vision. This reception is used to highlight the recreation area or the workplace in the communion. If there is a niche or protrusion indoors, beat them with another tint.

Horizontal or diagonal separation

A classic version of the horizontal separation of the wall: the lower one third of the same color, the upper two-thirds - the other. They can be simply separated by a smooth border, or to arrange molding, border, ornament, mosaic and what will tell fantasy.

But no one forces you to stick to exactly this option. The border can also take place in the middle of the wall, above, below or almost under the ceiling. This is your home and you decide how it will look like.

It is not necessary to make the boundary line. Make it with a wavy, blurred, broken or radius separating the wall diagonally, combine horizontal and vertical lines and stripes.

The boundaries of different colors are covered with scotch, to keep the purity of the lines. 10 minutes after staining, the tape is removed.

Figure on the wallpaper

It is not as difficult as it seems. There are various techniques, some of which are even available to beginners.

Method 1 - Using a special roller with a convex pattern

The roller is similar to the usual, but consists of two parts: one textured, with a pattern, the second rubber.

Using a roller on monophonic wallpaper. Figure is applied

Before applying the wallpaper on the walls, practice on an unnecessary piece of wallpaper so that the pattern does not smear and its elements coincided. For beginner artists, it is better to place the wall on the strip, otherwise the drawing can move, will break it with rhythm.

Trade offers textured rollers with different patterns

Video: drawing pattern textured roller

Method 2 - use of the stencil

Stencil can be purchased ready or do yourself. It is made of thin plastic, films or cardboard. The drawing is easy to find on the Internet and print on the printer.

1. With the help of copy paper or tracing, transfer the drawing to the workpiece under the stencil.
2. Sharp the stationery or construction knife cut the pattern.
3. Seam the wall to draw the leng smooth.
4. Attach the stencil to the wall with painting scotch.
5. Foam foam sponge to the paint and press the surplus.
6. Softwalling movements apply paint on stencil.

Drawing drawing using the stencil - the occupation is painstaking, but exciting

This process is painstaking and unprecedented, but the result is worth the effort. Yes, and the occupation is creative, fascinating.

Method 3 - Using stamps

The finished stamps are sold in stores, but you can use the remedies. The foam sponge, a cork from a bottle, broom and even ... Hands will help to apply a unique pattern on the wallpaper. Practice on wallpaper remnants to be confident as a result.

The stamp is evenly covered with paint and pressed against the wall. The paint should not be too liquid, otherwise it will flow and the drawing will be blurred. Insufficient paint will not leave a clear imprint, excess will smear the drawing.

You can create an abstract pattern with a tampony method. Welding movements sponge pressed against the wall in chaotic order.

Method 4 - painting with your own hands

Circles, rings, squares, triangles - the simplest pattern on the wallpaper can be created for everyone. So you can make a panel or place items throughout the wall area.

A little harder to draw a full-fledged picture. In this case, the home projector will help. Lesson with the image bring to the device, and the resulting projection on the wall is simply circled with a pencil. If you have artistic abilities, you can try to draw a picture and independently.

Draw a picture on the wallpaper and your own exhibition hall will appear.

The elements of the picture are covered along the contour of scotch, the drawing is painted with a sponge or tassel. The main condition of success is accuracy.

Features of staining of different premises

Fantasy fantasy, but it is desirable that the color and drawing of the wall coating correspond to the functional purpose of the room.

Living room - face and front room at home. Here you can give the will of fantasy and the flight of creative thoughts. Just consider that the whole family is going to make in this room and guests are accepted. It is important that everyone is comfortable in the created space.

The bedroom is hidden from prying eyes and belongs only to you. This is a resting place, which means the interior should not bother or irritive. It is better to make a wall in pastel colors with a nonsense pattern.

The interior of the nursery implies bright and joyful colors. Here are appropriate image of fabulous characters or cartoon characters.

Leave one plot unpainted to the younger artists draw, without fear of complaints. Artistic then will easily paint, providing a clean canvas for new creations.

Gallery: ideas for decoration of rooms with wallpaper under painting

1. After staining, the wallpaper can be coated with a layer of acrylic varnish. It will secure the colorful layer, protects from moisture and will allow washing the wallpaper.
2. Paper wallpapers are designed for 5 repainting, phlizelin and fiberglass are withstanding to 10.
3. Overloaded paint wallpaper will lag behind the walls.
4. The more colorful layers, the less relief drawing is noticeable.
5. Latex and acrylic staining allows you to wash the wallpaper without fears to damage them. These paints create a waterproof film.

Wallpapers Painting provide ample opportunities for interior designs in different styles. Showing a fantasy and putting hands, you can give your living space individuality and originality. Fantasize, create and embody your ideas.

The ability to paint the wallpaper for painting will correctly allow you to create your own hands extraordinary designs and stylish without tangible financial losses. As a rule, wallpaper is more expensive than usual, and many acquire them. And this choice is justified, because you can change the interior in a very short time, simply repainting the walls in one or more colors. And you can do it up to 10 times, and this means that you can forget about new wallpaper for many years.

And so, consider in more detail what kind of painting paint. We note immediately that not all wallpaper is used under painting. Cheap paper cloths simply soften and lose their aesthetics and attractiveness. Perhaps they will start bubble and in some places to break down. And it does not matter how much paint you will apply on them, they will still look ugly.

Therefore, buying wallpapers for painting, do not save. When choosing wallpaper, pay attention to vinyl or phliselinovye. This version of wallpaper is characterized by a beautiful embossed surface that you can easily repaint.

Wallpaper to paint must be painted, even despite their original beautiful white color.

Painting will protect their surface and increase the service life. Alternatively, vinyl wallpaper can also be used. They look very beautiful, and a huge range will allow you to choose the desired picture.

For painting wallpaper, specialists do not recommend using oil paints. It is also forbidden to apply coloring compositions diluted with solvent, since these substances will bring irreparable damage to wallpaper.

Wallpapers from paper and glass - it is better to paint latex paints, because They are not so aggressive. Paper wallpapers can also be painted with water-making compositions.

Flizelin wallpaper paint acrylic paints. And to improve the operational characteristics of the coating on their surface after painting. Although in this case it will be displayed again.

Painting of vinyl wallpapers as well as phlizelin-acrylic paints. What can be used both glossy and matte compositions. The second option will perfectly hob all defects on the walls. Several layers of coating are collected textured surface.

What roller use when painting wallpapers?

For high-quality independent staining of the surface, you should choose the right roller. It must well absorb all the paint, and at the same time it should not drain and spray.

There are rollers of two main types:

• with nozzle up to 10 cm;
• with nozzle up to 25 cm.

With the help of short nozzles paint hard to reach places. Long nozzles allow you to apply a homogeneous smooth layer with minor transitions.

The coupling must be fur with a small pile.

It perfectly absorbs paint and distributes it evenly with a slightly pressing on the roller. For better wetting roller, paint is better to pour into the bath. Surplus paint at the same time drain back to the bath.

How to paint wallpaper with your own hands?

The main rule is all paint mixes should be applied to a clean and dry surface. And it is necessary to wait for the complete drying of the wallpaper. And only after that, proceed to painting. As a rule, the interval between the salary and painting is about 24 hours.

All wallpaper in painting initially go white. And for their painting, you can choose anyone you are interested in. If you need to repaint dark wallpapers, apply neutral paint first, and then paint the desired color.

Consider the stages of the whole process of painting wallpapers with your own hands:

Painting Water-level paint also requires certain conditions. Pre-paint need to give a certain shade.

This can be done in two ways:

To create an original interior, it is necessary to paint the wallpaper in two colors. You can combine both close shades and contrasting. The gradient staining is also common - this is a smooth transition between close to color shades.

To highlight the border between colors, use conventional building tapes, borders and moldings, as well as other separators.

Types of painting wallpaper

To paint wallpaper, you should decide what final effect you want to achieve. Classic style implies clear boundaries between shades, and creative interiors can be created using arbitrary painting.

Below we will look at the popular uses of paints on the wallpaper:

Wallpaper Painting in the interior will give you complete freedom for creativity. With the help of them you can embody your brightest design ideas into reality. In addition, you can paint the wallpaper with your own hands and make a truly rigorous one.