It is not always convenient to use curtains. In some cases, more practical and more convenient to the blinds. They provide an opportunity not only to defend themselves from immodest views in the evenings, but also to regulate the level of illumination during the day by turning lamellas (plates). About how to install blinds on plastic windows and we will talk in this publication.

Constructions and installation methods

Blinds on the windows are two species - vertical and horizontal. Vertical lamellas are usually made from plastic or special dense tissue, sliced \u200b\u200bon a strip 10-15 cm wide. It is less likely to find lamellas from aluminum or synthetic threads.

The lamella of horizontal blinds are plastic, wooden and metal. Regardless of the type and material, they consist of a cornice and lamellae. The cornice is a plastic or aluminum profile of the P-shaped section in which the controls are organized and to which the lamellas are suspended. Laminers are horizontal or vertical stripes / plates that are actually closed by opening. In order to be able to open and close the blinds, there are controls - chains or threads.

In horizontal models, there is another control rod associated with the rotary mechanism. Rotating rod, change the angle of inclination of the lamellas. It is so possible to change the amount of light and the "degree of transparency" of the window. If the lamella to put vertically (almost), they completely overlap the review. With a horizontal position, they almost do not interfere with the review, but there are still a lot of other positions.

The device of horizontal and vertical blinds

When installing blinds, it is necessary to fix the cornice. To fix it, the kit includes specially designed brackets. These brackets are attached to the window or wall, and the cornice is simply put on them (until clicking).

Install the blinds on the reservoir windows in several ways:

With the montage method, the blinds will have to be determined before the purchase: the size of the canvas depend on it. So the type of installation should be selected before measurements.

Perform measurements

With the view of the blinds (horizontal, vertical) and the way they are installed (on the wall, ceiling, in the window on the sash, in the window opening), it is necessary to decide before purchase. And even until the measurements begin. Because the different way of installation requires different sizes. Only with properly made measurers to install blinds on plastic windows will simply.

Another important point: it is necessary to measure each window separately.. Sometimes it only seems that they are absolutely the same. Believe me, there is a difference. And the measurement results must be recorded and sign, which specifically the window you measured and what sash it is. Accurate and detailed records will help avoid confusion when buying and installing.

In the window opening

Although the appearance of products is different, when measurements have no difference between horizontal and vertical models. If you are going to establish blinds in the window opening, it is necessary to take 2 cm from its width on each side. From the height of the opening, you can take 1-3 cm. Such gaps are needed so that the canvas hangs freely in the opening and the lower edge of the lamellae are not rubbed along the windowsill.

Please note that installing blinds on plastic windows "In the opening", you can not flush with the edge of the opening, but deeper - the glass itself or retreating 5 and more centimeters from the edge. If the opening has a trapezoidal form, the height / width of the opening will be less, so carefully carry out measurements. And also, in this case, it is better to put marks for installation when measured. Then you will know exactly where it will be necessary to establish blinds on plastic windows so that their dimensions come out perfectly.

On the ceiling or wall

Here measurements depend on your desires. The length of the blinds can be until the floor or only before the windowsill. Moreover, depending on the chosen type of installation, the slats can cover the windowsill or not. So the length is like you like more.

This is a wall mounting. When attaching the ceiling will increase the length., And how much - choose you

Width of the blinds with this method of installation - wider window opening. How wide - depends on your desire, but the minimum approach is 5 cm on each side. But if the window is located in the same plane with the wall surface, you need additional brackets that are not included in the package: the lamellas should be attributed to a distance of at least 5 cm from the surface of the glass - so that they do not interfere with opening the checking on the ventilation.

On sash

When installing blinds on a multistate window there are two possibilities - put on the device to each sash or order one long on the entire window. Usually choose the first option - it allows you to open and close the sash with lowered blinds. If such a method is chosen, it will be necessary to measure each sash and record the results. Folds can be different, so be careful.

The width of the blinds when installing on the sash is taken by 3 cm wider than the glass. When hanging, there is a 1,5 cm lamella at the profile. It is convenient and does not interfere with open / close the windows. Length depends on the location of the fastener, but usually it is 5 cm longer than glass height.

Once again, we pay your attention: we measure each sash!

How to install blinds on plastic windows: Breeping to the wall or window

First of all, you must apply markup. In the cornice, install brackets. We place them on the right and on the left so that they do not interfere with the work of the blinds. The installation height depends on the selected product length.

We apply the curtains, mark the pencil on the wall of the place under the installation of fasteners in the brackets. If you mount the horizontal blinds (they are light and load almost not created), it is enough to put on one screw / dubel. Vertical harder, so it is necessary to install the entire fastener from the kit.

There is a second way. At the selected level using a building level, draw a horizontal line, try to avoid inclination - this will affect the blinds (overlay). Attach the lower part of the bracket to this line, apply a pencil through the holes for drilling. If the length of the eaves is more than 2 m, an additional bracket is needed to increase the stiffness of the structure, which is attached in the middle.

When mounting to brick or concrete, in the noted points drills in the wall or ceiling of the hole. Drill or puncher - who has what is in stock. The diameter of the drill depends on the size of the dowels. They usually go bundled, but you can put your own.

In the finished holes insert the spacer dowels, carefully scoring them with a hammer. We put the brackets, secure them with screws or nails (if a dowel-nails are used). We install the cornice on the brackets, insert the plugs on the sides. For horizontal blinds, attach the rod (handle) to control the rotary mechanism. To do this, directly into the mechanism itself install a special hook (included), the tip of the rod attach to this hook.

Installing horizontal blinds on PVC window sash

At the same time, the montage of the blinds are attached to small self-draws (come in the kit) in the profile of the window. It is necessary to install them so that they do not interfere with the handle turn. Be careful: if drilling too close to the stroke, you can damage the glass. Therefore, in this case, the correct measurements are very important.

Installation step by step

The procedure for such:

The need to drill holes in the window frame may scare, but there is nothing terrible. In the case of incorrectly made holes, unsuccessful can be pouring sealant. White silicone, not acrylic (acrylic turns rapidly). The characteristics of the windows are not affected. What can be dangerous is to get into the glass. Then he can crack. But this is not fatal - it can be replaced, even though it will be not suiced.

We put the lower locks

But that's not all. To finally install horizontal blinds on plastic windows, you need to drill another pair of holes - under the clamps (called another antiveter). These are additional attachments at the bottom on the window opening. The bottom edge of the blind are refilled in them. Do this in order that when carrying out the blinds do not hide, they did not hang out from the wind and did not knock the items on the windowsill.

Do not hang out ...

I put the locks like this: trying to stretch the blinds down a bit, we note the location of the fastener, drill holes, install. We refuel the lower bar in the installed clamps. Now, even with draft or open, the blinds will not hang out. The only thing for what to follow when installing is, so as not to get into the stroke (this is a long strap that goes along the glass package and keeps it). It is necessary to drill a hole in the frame itself, retreating at least 1 cm from the edge. There are no problems in the rest.

Without drilling

There is also a way to establish blinds on plastic windows and not drill a frame. This method is available only for those shutters that hang on opening sash. In this case, they are simply hung on plastic mounts / brackets that wear on the frame from above. So that they do not move, on the back side of the bracket attached a bar of bilateral tape. After removing the protective film, it can be glued (but you can not fix it).

These M-shaped plastic brackets do not go bundled, but they can be bought in the store or on a firm that sells horizontal blinds. This method is convenient for easy dismantling blinds, which is convenient if they need to be fixed or washed.

Assembly vertical blinds

Vertical blinds are installed in the same way as described above. The difference is that the lamellas are installed after the cornice fastened (the guide on which runners move). For convenience, before mounting the lamellae, you can turn the runners with a cord so that the slots in them are perpendicular to the eternity. Next, just snatch the lamellas in the sluts, inserting the strip before clicking. So, in turn, fasten all the lamellas.

If the lamellae is made of matter, then after their installation, do not forget to insert the lower weight. Next, kpripim to the lamellas the bottom connecting chain.

Installation of vertical blinds is over.

To save money, you can try to install blinds with your own hands. Work is simple, you just need to correctly mark the markup of the slope or frame, depending on where it is necessary to secure the design. You can use different ways to install such curtains, the choice is made on the basis of structural features and dimensions.

Overview of species Curtains Blinds

For different objects, the design of the windows of a certain style and functionality is selected. Lamed in designs can be located differently: vertically, horizontally.

Horizontal shutters

You can find different types of types: Plistes, interframe, mansard, bamboo rolls, the same group includes rolled. The main distinguishing feature is horizontal lamellas. They can have different thickness, width and function differently. Such designs can be attached to the slope, frame, they are also installed on top of the window block or inside the frame. It all depends on the size of the windows and preferences of the owner of the housing.

Design of horizontal models

Classic horizontal blinds can be installed in rooms with a variety of target purposes: offices, private accommodation, production sites, administrative, commercial and general education facilities. These are universal designs that are found in different shades.

Vertical blinds

Such curtains are usually on top of the windows, which is due to structural features: vertically oriented lamellae, made most often from the woven material. Two main types of similar structures are found: floor or window sill.

General view and device of vertical models

This is one of the reasons explaining why such curtains are customary to install in private houses, apartments and offices. Installation of blinds of this species is made on the self-tapping screw. There are an alternative installation option - to the ceiling surface.

Rolled curtains

Blinds for windows in this design combine two varieties of curtains: classic fabric and horizontal plastic. They are equipped with a solid cloth of differentty material, closed the glass, and if necessary, climb, turning into a roll.

Device of rolled curtains

The attachment of the blinds of this species is carried out by means of screws, as well as brackets. You can hang them in various interiors.

Fastening options

Horizontal and vertical curtains are characterized by individual structural features. Based on this, various attachment methods have been developed:

Mount 1: On vertical structures

Fastening for vertical horizontal models to the wall

Vertical curtains can be fixed under the ceiling or over windows. Such blinds on plastic windows without drilling are impossible.

Fastening 2: On horizontal view

Designs with horizontally oriented lamellas in standard design are attached directly to windows of windows, to the top slope. Horizontal blinds without drilling can be placed in any version only on the sash of the window block.

G - w can be mounted in the opening of the window, on the ceiling, wall, on the flap of plastic windows

But the interframe analogue is designed exclusively for installation in space between the frames of the windows. There are restrictions on the installation to the upper slope, in particular, interferential and attic blinds are not attached. If the installation is done with your own hands, it is necessary to take into account the structural features of the products when the installation method is selected.

Preparation, measurement

From the tools it will be useful: screwdriver / screwdriver, roulette, joinery pencil. To the curtains function as efficiently as possible, you need to correctly perform measurements. The design should be placed symmetrically relative to the glass package.

If the blinds without drilling are fastened with adhesive tape, it is possible to correct errors. For analogues installed on the brackets and self-tapping screws, you need to mark as much as possible.

To secure vertical curtains, it is enough to measure the dimensions of the window opening, the distance between the points of attachments and the length to the lower edge of the curtains. This will allow you to properly arrange the design relative to the floor level and window opening.

Horizontal blinds are often installed on the sash, so the main measurements relate to the double-glazing: height, the width of each glass. To these values, 2 cm in the upper edge and lower, 0.5 cm on the sides are added.

Installation of vertical blinds

With your own hands, perform the installation of such curtains for anyone who wants. If the blinds are small, they can be placed inside the windows of the windows. Otherwise, the installation is produced on the wall or under the ceiling.

For error-free attachment is given a consistent instruction:

Step 1: Marking

The central point of the window opening is determined and correlates with the center of the Blind Cornice. You need to make it yourself marks on the edges of the design. Points for the installation of self-tapping screws are scheduled from two sides of the eaves closer to the center of the window block of approximately 5-6 mm.

Attach the cornice to the wall so that the center of the eaves coincides with the center of the window, and make markers around the edges.

Step 2: We look at the level

At the same time, you need to evaluate whether the lamellas are located correctly. Their lower part must be 1-2 cm above the floor level. The same need to retreat when installing short curtains (before the windowsill).

Step 3: Fastening brackets

Installation of dowels is performed in the holes previously prepared by their own hands. Brackets are fixed, it is done with self-tapping screws. Next, special clips are installed on these elements.

Observe work with a perforator when drilling for mounting brackets, otherwise part of the wall can be broken.

Step 4: Installation of lamellae and chain

The cornice is attached, in which only the runners will remain and already hang the vertical lamellas themselves. The last barcode is the mounting chain.

Lamed needed to hang exactly in the order as they are folded in the package. Otherwise, you can break the drawing of the blinds.

Montage horizontal

Guided by the markup made earlier, you can perform the fastening of the horizontal structure with your own hands. For this, an instruction has been created:

1. First you need to secure the upper fasteners. To do this, with the help of a screwdriver are preparing holes that will allow installing brackets by means of screws.
2. Next, you need to hang eaves, it is attached to a click.
3. The holes for the lower mounting (corners) are drilled taking into account the size of the filament lock, connecting the lamella. Usually, the design of the blinds requires the execution of holes on the sides of the glasses. Then the retainer that is connected to the lamellae can easily insert into the corners.

Installation, which is done with your own hands, you need to perform with maximum attentiveness, otherwise the blinds will function incorrectly.

Methods for attaching rolled curtains

If a decision is made, how to set the blinds on the window, the priority task is to determine the appropriate attachment method. The rolled construction is mounted on the self-tapping screw, and with the help of adhesive substance (sticky tape, liquid nails).

2nd methods for fastening rolled curtains on PVC window, on M-shaped brackets and scotch

In the first case, the technology of installation of vertical curtains is taken as the basis, since roll blinds suggest the need for fastening only in the upper part of the structure. To "plant" the design on the adhesive composition, the surface of the windows is cleaned and degreases. This will improve the coupling of materials.

This option is suitable for double frames. Installated plastic curtains - a complex process and implies the need to disrupt the integrity of the frame profile: holes (2 pcs.) To output the lock management system (handle and cord).

They should be located at the top of the inner sash. Installing brackets is made on the upper profile, the basis of the horizontal blinding technology is taken.

The main tips for choosing:

• Before purchasing the design, you need to clarify the composition of the kit, in particular, the availability of fasteners;
• If the installation is easy to perform yourself, then the repair of the curtains is better to entrust the wizard;
• Behind the plastic is easier to care for;
• It is not recommended to clean the new design too often, as this will lead to a rapid abrasion of the protective coating.

Detailed instructions:Step-by-step installation with your own hands (photo)

For example, horizontal blinds can be placed in any convenient way. However, the most popular option is over the sash. The interframe design is comprehensible, and the vertical analogue can only be located above the window or under the ceiling due to large dimensions.

There are twelve species blinds. Each of them has its own distinctive characteristics. Initially, all the blinds are made to divide on vertical and horizontal.

Horizontal blinds are greater popular for designing home space than public. This is due to the fact that they occupy less space than vertical. The design is not massive, mounted by it by or without drilling. Horizontal models made of thin wood cutters: cherries, beech, oak, tees, metal alloys, fabrics and bamboo.

Installation of blinds

Vertical blinds are more often found in the design of spacious offices, hospitals, training classes, premises with large panoramic windows. Create them from French jacquard, flax, polyester and thin plastic. Fabrics are pre-treated with special dust-repellent, antistatic means. They are easy to care for them, clean from dust, which is very important for premises with a high degree of passability.

Depending on the type of design, finishing materials, sizes and appearance, the installation option is selected. There are two solutions that either provide drilling or not. Massive types of blinds made of wood or metal alloys are fixed only with drills, screws and brackets. Light rolled curtains, mini, roller system, bamboo can be attached to special M-shaped brackets or assembly tape. Let's look at the options in more detail how to hang blinds.

Mounting Scheme Vertical Blinds

How to make a measurement for fastening elements

To make a measure under the horizontal design, you need to measure the length and width of the glass package. When the model is set to the length, add +1 cm, and to the +5 width.

Installing horizontal lamellae on the sash assumes such actions:

1. We measure the width of the window opening in several places.
2. We make a mark in the widest place.
3. Add one centimeter to the width.
4. We measure height.
5. Add four centimeters to height.

Vertical structures are fixed directly to the glass, wall, ceiling. So that the slats evenly cover the entire area of \u200b\u200bthe window, the area on the sides must exceed 8 centimeters. Thus, the double-glazed car looks harmoniously. When installing on the opening or to the ceiling to height, add the area from the ceiling to the window or from the opening to the window.

Installation Instructions Vertical Blinds

How to hang vertical blinds

Before starting the installation, make sure that all design details are available.

1. Eaves, fasteners (brackets).
2. Vertical lamellas.
3. Control apparatus, electric drive (if built).
4. Clothespins for lamellae.
5. Rotary mechanism.
6. Runners for lamellas.
7. Control thread, with which the mechanism turns.

Next, strictly by markup marks make holes. If the installation occurs on the glass, work with a drill extremely neat. Make the required number of holes, insert the fasteners. After you need to install eaves with runners. Then attach the slave. Stretch the adjustment thread and secure it with a ship. Check the turns of the lamellas. Vertical blinds, with the exception of woven cloths, set more often by drilling method.

How to hang horizontal blinds

At a distance of 5-7 cm from the glass, make marking for fasteners. Then make a drill small holes. We establish brackets and crepary eaves to them. A characteristic click is evidence of the correct installation. Blinds omit and install the lower locks. To do this, we make markup and screws with the retainer screwing down at the bottom or side of the window sash, after which the fixed design is verified. Bole detailed information on how to hang blinds, you can get in this video:

Installation of blinds without drilling

There are several options for fasteners without drilling. They are suitable for installing light design options.

• Construction / Mounting Scotch.
• Special magnets.
• M-shaped brackets (they are fixed to the opening fasteners of glass windows).

With the help of the assembly scotch, the Rollers box, mini or shovel roller systems are easy to mount to the glass. For this, double-sided adhesion glue to the design, which is then needed to press the window. Before mounting on the tape cornice, be sure to degrease the surface of the window! Make sure that the curtains are smoothly attached. Do not mount the design to the cold frame. Scotch loses properties due to a cold surface. Make marking in advance.

Mr. brackets are attached only to the opening windows. The advantage of the installation on the M-shaped bracket is the lack of the need to make holes in the double-glazing. You may not worry about the depressurization of the window.

Blinds are a light-protective accessory, which is very popular due to its practicality and functionality.

You can find a large assortment of these beautiful and stylish products that differ from each other with their design and cost. And manifesting a little fantasy, you can save at all on their acquisition and make blinds with your own hands.

Before proceeding to their manufacture, it is advisable to view the photo of the blind in real interiors, as well as to decide whether the space of the window opening and the nearest wall they will occupy.

Such curtains can be fixed on separate window sashs, without limiting access to the window frame handle, as well as on the simpleness, located above the window.

Accordingly, it is necessary to calculate the size of the window sash, or the distance between the side slopes, as well as the height of the top slope window to the windowsill. In the last version, it is necessary to foresee at least 5 cm on lateral simpleness and about 10 cm - under the cornice.

Paper blinds in the form of a semicircle

Deciding to understand the question, how to make blinds, it is worth a recognition that one of the most low-cost and easy-to-manufacturers are blinds made of paper using the Plisse method.

They make it easy to refresh the interior or protect the window glass at the time of repair work.

To perform this type of curtains you will need:

• solid paper cut (monophonic or patterned);
• scissors;
• line or smooth plank;
• pencil;
• paper clips;
• awl;
• durable cord;
• double sided tape;
• cardboard;
• clamps for clothes or volumetric buttons.

Work should be performed on a smooth free surface.

Instructions How to make blinds of Plisses with your own hands as follows:

• Prepare a paper strip. Its width must exceed the size of the window sash by 0.5 cm on each side.
• Fill backside the sheet of paper strips of the desired width (up to 4 cm). It should be remembered that the wider the strip will be, the more massive blinds will look.
• Bend the paper in the places of the lines. If the paper is very thick, you can pre-with a line with sharp scissors with sharp scissors so that the bends are more even.
• Fold the entire paper strip by the accordion, lock the edges and the middle of the clamps.
• Measure the middle of the resulting design and pursue it with a selection.
• Insert the cord into it.
• At the top, tie a node or fasten the button.
• To make the basis more rigid, stick to the extreme planets cardboard strips.
  To ingue the locks in the lower part of the cord.
• With the help of two-way tape, glue the blinds on the inner side of the eaves.
• Attach the tape shutter on the tip of the lower edge and take the bottom of the semicircle.

Paper blinds pliers with straight edge

Direct pleated blinds from wallpapers are manufactured by the same technology, but here you will need three rows of cords: 1 is located in the middle and 2 at the edges with an indent 3-5 cm.

Instead of paper, you can use cane sticks, newspaper tubes.

Horizontal Blinds: Making Scheme

For the manufacture of horizontal blinds, it will be necessary:

• boards, sheet of plastic, plywood or plexiglass;
• cutting machine;
• grinder machine;
• drill;
• liquid means for treating products from wood (Moridalka, varnish);
• glue;
• cord;
• wood timber for cornice;
• fastening elements.

The sequence of actions in the manufacture of such window curtains is as follows:

• Cut strips from the existing material.
• Proceed the edges (sand and slightly round).
• All wooden elements are stuck, cover the mourn or varnish and dry.
• Mark the center of each individual plate, make holes with a drill. Do the same with the cornice and screw into it a small ring in the middle.
  Spread the details on a flat surface.

After that, you can master the technology, how to install blinds on the windows:

• To inhale the cord into one of the side openings of the eaves and secure the first with a node or stapler.
• Grind the cable into a similar hole of the slats, each time under the bottom of the lamella tie a nodule or fixing the button (this can be done using glue).
• In the same way insert the cord from the opposite side.
• Perform a central lacing without the use of glue so that the lamellas are freely moving along the cord.
• Describe the lifting mechanism of the blinds as follows: starting from the bottom plank and reaching the cornice, cross the cord through a predetermined ring, then from the inside of the curtain to lower the cord down, connect both ends and in the limiter.
• Secure the brackets in the wall and hang ready-made protective curtains on them.
• Check out their work by pulling the cord located in their central part.

Vertical blinds

Blinds can not only be horizontal, but also vertical, and run from various materials, including cladding. Such curtains look quite massively, but very original.

For their manufacture, you will need eaves and fittings. Framed on a special strip machine must be made of one length, sanding them and cover them with varnish.

Note!

Then, with the help of self-tapping screws, metal clips should be fixed on them, after which it starts to the final assembly of the structure.

You can also independently make vertical lamellas from wood or plastic (including plastic bottles), or sew tissue blinds.

Production of a turning mechanism

In order for the blinds blinds to move up and down, as well as relative to its axis, it is desirable to equip them with a rotary device.

Its function can perform a durable cord or strip of fabric, suitable length of which is considered a twin height of the blinds plus at least 10 cm for a retainer.

The braid must be glued to the end part of each plate. Next - to skip the cord through the ring, fixed in the eaves, then from the inside of the blinds down, without gluing, after which it is not glued to connect both ends and put on the limiter - the retainer.

Pulling over one edge of the braid, you can give the straps a vertical position, and after another - to arrange them horizontally.

Note!

As can be seen from the description, the manufacture and installation of blinds do not pose much difficulty. All this is bye even newcomer.

Stock Foto Blinds do it yourself

Note!

Residential buildings and restaurants. Products are designed to preserve the intimacy of the situation, protect from the sun's rays. In order for them harmoniously looked in the window opening, they must be properly installed. How to fasten various blinds on plastic windows, you can see on the appropriate video or read the instructions. Depending on the shape of the product, the types of fasteners will be different. Next, we will tell about the basic installation methods.

Installation options Blinds

Different factors affect the installation method, but the main role is played by the presence of a smooth surface. If the walls are twisted, they need to be aligned to avoid complications during installation. There are the following options:

• Mounting on the ceiling;
• Installation on the wall;
• Placement inside the window opening;
• Installation of blinds to each glass sash.

When choosing a way to navigate the design. The sequence of the works themselves do not differ much.

There are several options for fastening the blinds to the window to work with both drilling and without

Stages of mounting

Universality blinds implies similar procedure for various ways of fastening. Differences will be only in detail.

1. First of all, it is necessary to measure the window opening. If the owner decides to consolidate the products by the third way (in the window opening), then from the received data it will be necessary to take a pair. This will help to avoid a ridiculous situation when the blinds are dragging along the windowsill. If the user will be decided to mount the brass, then, on the contrary, it will take the addition of unnecessary see. To securely close the window, it will be enough to 4-5 cm from a wide side. The length can be at all - to the floor. Here you need to focus on your own feeling of taste. If the host will choose the 4th Mounting Method, it will take measurements of each sash. In the case of curvature detected, it is recommended to customize measurements as for the correct figure.
2. Marking. It is due to the markup of the fasteners, which should be placed symmetrically and accurately. Geometry is important because it will depend on the reliability of the design itself. Already during the markup, you must check the ability to open and closing the window. The product should not interfere with the owner to air the room. It is also important to determine the place for the cord, since it is there there will be the point of the greatest pressure. In particular, it is recommended to provide additional fastening.
3. Installation. Self-tapping screws are installed directly into the wall or ceiling. After they were screwed, they suspend the cornice for fixing blinds. Then you can test the product itself.

Device diagram Blinds

Nuances of the installation depending on the type of plastic products

In order not to damage the plastic windows when installing the blinds, it is necessary to carry out work extremely carefully. Consider the subtleties of installation for different types of products:

• Vertical blinds. This species uses the greatest demand because it allows the designer to experiment with color and shape. The assortment of blinds is extremely wide. For installation, it takes not so much: the cornice, the lamellas, the chain with runners. The latter should have sufficient length so as not to limit the operation of the device itself. This is all the more relevant if the window is distinguished by a non-standard form.

Products can be installed on the mount in the ceiling or wall. In the first case, you should navigate the width of the lamella to determine the area of \u200b\u200bthe opening of the cornice, that is, the retreat from the wall. Mounting to the wall also implies the possibility of the location of the eaves both under the ceiling and over the window itself. After installing brackets, runners are installed on the mounted cornice for lamellays.

Various installation options on the window

Since vertical products do not function without loads, they will need to hang on both sides of the blinds somewhere below.

• Horizontal blinds. Often these products are mounted in the second or fourth way. Installation on the wall is required when the owner wants to completely close the window opening. And the installation to each sash allows you to preserve the functionality of the plastic glass package. Installation work implies the passage of the same steps as in the case of vertical products.

Installation of blinds with drilling and without it

There are two main options for fastening the cornice. The first method implies the use of self-samples, and the second - M-shaped mounts.

Self-tapping screws allow the owner to set horizontal products directly on the window profile.

Attention! The latter will not feel a significant damage, because the holes can always be sealing with a white sealant.

Before drilling is marked. To do this, establish blinds in the cornice and open completely, after which they bring to the window. A visual assessment should be made to understand how accurately all the measurements were made, because further it will be necessary to transfer the markup of the brackets to the profile. There should be no distortion.

Competently attached blinds will decorate the room and will serve the owner for a long time

After the drilling operation, the following actions are made:

1. The cornice is screwed through brackets;
2. Fastenings are closed;
3. A hook with cane and tip is installed in the control unit;
4. Fixed by the knot the bell;
5. Then, through the cord, the product is lowered to the end to lock the blinds below.

M-shaped brackets are attached without drilling, which will be required separately. Method of conventional snapshots greatly simplifies the care of the window and blinds. These brackets cling to the tops of each sash, if only it is not deaf. This type of fastening is considered to be the most suitable for installing the product inside the window opening. The use of the same scotch does not guarantee the same degree of reliability that special brackets can provide. At the same time, they retain the integrity of the window profile, which is important.

Following these recommendations, the user can establish blinds on plastic windows alone. Depending on the shape of the product and features of the window, you will need to select the optimal method of fastening. The best considers the method without drilling.

Video: How to fix blinds on plastic windows

Photo: How to attach blinds on plastic windows