What could be easier to paint the walls? The main thing to align the surface, so consider newcomers. But at the first trip to the store and buying what you need, it turns out that the paint of one shade, and on the wall, completely different. It looks too dull, hissing badly. And this is not the biggest problem.

How to choose the right shade?

Do not trust the seller who waving his hand on the shelf with paints, says all pink shades there. Experienced wizards will always offer a fan catalog.

The shade in such directories is exactly the same as on the wall. Moreover, by defined with the color, you can tilt the picture, varying the illumination, because the depth of the paint can change in the outdoor and in the shade.

Pluses of wall color:

• Huge selection of shades. The possibility of mixing and combining them during painting;
• The painted wall allows to emphasize its texture (for example, with a decorative putty);
• High-quality paint will not lose its properties for a long time. She is not terrible small scratches, chips and cracks (chips and cracks depend on the selected type of paint and the quality of the work on painting);
• No restrictions on decorating such a wall. For example, drawings or stencils;
• Wide opportunity for zoning premises;
• Easiness in color change.

Cons Coloring walls:

• Emphasizes the flaws of the wall, so painting requires careful preparation of the basis;
• Moisture-resistant coatings are quite expensive.

What kind of wall paint choose?

Modern materials for painting have a fairly wide list of properties and characteristics.

"The main thing is to decide what kind of paint is needed to you - glossy or matte."

The composition allocate several types of paints depending on the purposes and budget allocated to the purchase of materials:

for walls

The most common and cheapest type of paints - oil-based coatings. They are created on the basis of mineral oils. After their application, a thin film is formed. However, the wear resistance of paints of this type is not large, and it will dry for a very long time.

Here the binding element - resins, which are created from the same vegetable substances as oil, but due to oxidation, they are more wear-resistant. And quickly dry. Large minus - solvents that have a resistant smell.

Silicate wall paints

They consume exclusively minerals. Such paints create a canvas similar to glass. The liquid silicate, which is included in its base forms a smooth and resistant to the abrasive load layer, in addition, such coatings are not afraid of wet cleaning. Big minus - toxicity of substances during staining. Therefore, when working with this paint, it is worth using gloves and respirators, however, after drying, such walls are absolutely safe.

Paints Butadiene Styrene

This type of coating of the master as the type of finish finish is used infrequently. It includes artificial rubber. Butadiene-styrene paints are more wear-resistant and moistureproof. They are most often used to create a basis.

Water-dispersion latex paints

Latex, which is part of such paints creates a solid and smooth surface. She is able to hide roughness and her shortcomings, as if masking the surface of the wall. However, it is afraid of light, the wall with such a coating can lose the initial brightness. The cup of all is applied to the ceilings.

Silicone Wall Paints

The most versatile paints. They have high quality, and the characteristics of the characteristics are hardly reduced by any other coatings. Silicone-based paints are capable of completely hiddenly flawed with a depth of more than 2 millimeters. On this surface, the dust almost does not lie. It does not miss moisture, and due to its composition allows the walls to "breathe". The only drawback is high cost. Mostly silicone paints are used for painting facades.

This paint is an unconditional leader in the ratio of "price-quality". It does not fade, persistent, wear-resistant. It can be used both to cover the ceilings and walls.

Rubber paint

This relatively new type of LKM. When drying, forms a durable and elastic film, not subject to cracks, peeling, detachalness and yellowing.

One of the first companies began to produce rubber paint in Russia is Mitsar. They specialize in paints and enamels with elevated ending parameters.

Rubber paint "Mitsar Universal" is resistant to mechanical effects and UV radiation. And due to the high water resistance, it can serve as a waterproofing material. It can be used to finish shower, bathrooms and pools. Cost on the official site at the time of placement of the article (edit) - 3661 rubles (14 kg).

Mitsar's products are available in economical flow and low cost. For example, for the coating of 1 square meter of the surface you need only 120-150 grams of Mitsar Universal (the manufacturer).

In which case it is better to paint the walls?

In a duel with rolled collections, the paintwork wins in the following cases:

1. If, the area under painting has a complex design: columns, protrusions, niches, eaves;
2. If time saving is required.

Painting is the best solution if you need to update the part of the space, or separate the zones. Such coatings in comparison with paper wallpapers are better clean, and do not rush. This will be the best solution if there are children, or animals in the house.

Could not pass without the use of different paint products. Someone applies it to carry out minor decorating work, and someone - as the main material used for decoration of walls and ceilings. The reliability of the repair will in the latter case will fully depend on the correctness of the selection of the composition, therefore it should be approached very responsibly.

While thinking about how paint paint the walls in the apartment, you need to pay attention not only not only the color of products, but also to many other criteria, which we will tell in detail in this article.

The main functions of coloring compositions

The use of paint greatly facilitates the process of all repairs and opens up huge opportunities in terms of decorating the room before the owners. With its help, you can create a cozy monophonic interior or turn the walls into a real piece of art, decoring them with various patterns and compositions.

This option of wall decoration attracts owners with its simplicity and unpretentiousness. The boring colors can always be painted with more fresh tones, and not necessarily not necessarily arrange global repairs and hiring professional workers.

In addition to the decorative function, the paint should perform the role of a protective coating that protects the wall from the negative impact of the environment. This quality is especially important in rooms with an aggressive microclimate, so for them finishing materials are selected more carefully.

But how to figure out the huge assortment of compounds and understand what paint paint the walls in the apartment and in each individual room? To make the right choice, you should consider all the types of similar coatings, their technical characteristics and scope of application.

What parameters of the paints are worth paying special attention

When choosing products for staining internal surfaces, the characteristic of paints for walls should be considered primarily. Special attention should be paid to such indicators as:

Environmental friendliness;

Wear resistance;

Care requirements;

Shelterness;

Time to complete drying;

Resistance;

When it comes to the repair of a dwelling, there is a very important role to ensure the harmlessness of the materials used. Do not everyone know that many painting compositions can harm human health even after complete drying. Paints, unsuitable for use at elevated temperature and high humidity, highlight a large amount of toxic substances that should be considered when using them.

Wearness resistance and care for each composition are also different. Some covers can be rubbed and washed using chemicals, others are not at all accepting contact with water. Considering the specifics of the premises, you should choose the most appropriate option.

The coverage indicator indicates the ability of the composition to overlap the previous color. The greater its value, the less layers will need to be used until the old shade is fully painted.

For rooms that are on the sunny side, the light-resistance paint is very important. So that the painted walls do not lose color in time, for such premises, it is recommended to choose a coating resistant to ultraviolet.

From the time of drying, the speed of repair work depends, and the paint consumption indicates the cost-effectiveness of this coverage, which is also very important.

Main varieties of Krasok

If you cannot decide which paint to paint the walls in the apartment, consider all existing options and determine the optimal case.

So, all modern coloring compositions are divided into two main groups:

Alkyd;

Emulsion.

The first group is made on the basis of alkyd resins, which is why the compositions have a sufficiently unpleasant smell, which is often preserved even after drying. This product is characterized by fire-haulance and susceptibility to alkaline effects.

Alkyd compositions include oil and enamel paints.

Oil coatings are made on the basis of olifa, due to which they have the lowest price tag. However, this is the only advantage. Such paint is very toxic, dries for a long time, quickly loses its original color. Oil for walls are not used in indoor decoration.

Emalevic coatings are made on the basis of varnish. They quickly dry quickly, perfectly fall on any surfaces, have good resistance, withstand the effects of water and light and, most importantly, non-toxic.

A group of emulsion paints includes harmless coatings that do not distinguish unpleasant odor and harmful substances. They are characterized by fireproof, resistant to alkaline compositions, rapid drying and a large variety of shades. Therefore, if the choice of paint for walls causes you difficulties, feel free to prefer this group, which includes the following compositions:

Acrylic compositions;

Latex coatings;

Water-emulsion paints;

Silicone coatings.

Let us consider in more detail all of the above species.

For walls and ceilings in residential premises

Compositions based on aqueous dispersions of acrylic resins are considered the most suitable for internal work.

They are characterized by a high drying rate, minimal toxicity, resistant to abrasion, absence of sharp odors, resistance to moisture and the ability to stain in any shades.

For walls and ceilings today is presented in glossy, matte and pearl version. There are also special varieties of this product, designed specifically for bathrooms, kitchens and surfaces located near heating devices.

Due to the possibility of collecting a mixture into a variety of shades, a water-based acrylic paint is actively used in decorating inner walls. Its functionality allows you to paint almost all surfaces in residential rooms (walls, ceilings, doors and other items). It perfectly falls onto the smooth wooden, brick, concrete bases and slagoblock.

Acrylic paint on a water basis has gained great popularity in the decoration of bedrooms, living rooms and children's rooms. Despite its waterproof, covering the walls near the shells and shower cabins it is not recommended, since the straight splashes take this material badly.

On the walls, the composition is applied by any painting tools in several layers. If necessary, paint can be diluted to a more liquid state with conventional water.

Latex paints

The addition of latex is considered the most expensive subspecies of emulsion compositions. She is absolutely harmless and fireproof. Its main differences is very high resistance to abrasion. Latex additives contribute to creating a strong water repellent film on the surface, so that the walls can often be washed.

This coating is very resistant to moisture, the pairs misses well and does not forms condensate. Antiseptic and antifungal properties, which possesses paint, allow you to use it in the bathrooms, toilets and kitchens.

The latex coating structure contributes to the masking of small cracks and chips.

The liquid composition can be applied to the wallpaper for painting and decorative plaster, walls of wood and other plastered surfaces. It should be borne in mind that the glossy moisture resistant type) strongly emphasizes all the irregularities and defects, while the matte hides them perfectly.

The paint is applied to the surface with a roller with an average pile or a wide brush. The coating is obtained as dense and uniform as possible.

Latex type disadvantages can be attributed to weak resistance to ultraviolet rays and high cost.

When choosing latex paint, the type of surface should be taken into account on which it will be applied, as for ceilings and walls, the manufacturer produces absolutely different compositions.

Water-level paint.

The most short-lived and cheap today is the paint water-emulsion (for internal work). The price of such compositions attracts many buyers, however, in addition to the cost, attention should be paid to some features of this coverage.

It can not be used indoors where wet cleaning is often carried out, since under the influence of water, the paint is gradually washed off. Nevertheless, the compositions of this type are very valued for absolute environmental friendliness and safety for others.

Also, the positive features of the water-emulsion paint include:

1. Very rapid drying (up to two hours).

2. No unpleasant odor in the process of staining.

3. The possibility of tinting. Initially, colorless paint can be given completely any color (using special pigments).

4. Simplicity of work. Paint is fairly easy to apply. Fair tool, hands and clothing can be cleaned with water.

5. Excellent vapor permeability.

You can use such a paint on any flat surfaces that are not in contact with water and are not friction. When processing the plastered bases, the paint is applied in three layers if the walls with wallpaper are separated, two treatments are quite enough.

Silicone paints

Silicone decorative paint for walls does not have volatile and harmful components, thanks to which it is used even in children's rooms. It has a high cost, but it has a number of positive qualities:

. Parp permeability. Due to the fact that the use of this composition maintains a natural air exchange, a favorable microclimate reigns in the room.

. Absolute waterproof. Such a coating can be used in rooms with high humidity, condensate will not accumulate on the walls and mold to form.

. Resistance to sharp drops of temperature and sunlight. Such paint perfectly transfers elevated temperatures, so actively used in the trim of bathrooms.

. Pollution resistance. The coating does not attract dust and is well cleaned from any contamination.

. Universality. The composition can be applied on any basis. They can be covered wood, brick, plastered walls and natural stone. Also, this option will be an excellent choice for those who need paint for concrete walls. The composition masks all the cracks, cracks and all sorts of defects.

. Durability. Repeated walls will be needed no earlier than 20 years.

Apply silicone paint on pre-prepared surfaces. They are purified from garbage and dust, after which they are ground.

how to apply and what is its features

It is impossible not to mention another type of paintwork coatings, which is very popular in the finishing of the internal surfaces - texture paint for walls.

With it, it creates the most unusual and exquisite embossed covers of a wide variety of patterns.

The undisputed benefits of texture compositions include the following qualities:

1. Good resistance to ultraviolet.

2. Flexibility of frozen coating. In the process of natural shrinkage of the building on the surface of the walls, cracks are not formed.

3. Resistance to humidity. Surfaces are not covered with mold and fungus.

4. Resistance to any contamination. The walls do not attract dust, dirt and do not absorb odors.

5. Absolute environmental friendliness. The product does not include harmful components, which makes it suitable for use in all rooms (without restrictions).

6. Extensive color gamut. Shades of paints for walls (textured type) can be the most diverse, which allows you to pick up a color for any design room.

7. The possibility of applying for any reason.

8. The ability to hide small flaws and surface defects.

Textural paint is applied extremely simple, without the use of any expensive equipment. To create unusual textures in it, you can add small wood sawdust or quartz sand, which will allow the coating rough reliefs or create fine faces.

Depending on what effect does the owner of the room wants to achieve, one of the following tools is used for applying:

Ordinary sponge;

Textured rollers;

Comb;

Metal spatula.

Before applying the composition, the surface is purified from garbage and old coating. If there are deep excavations in the walls - they are closed with putty. Smooth base is treated with acrylic primer deep penetration.

The finished mixture is thoroughly mixed, picking elements are added, after which they are re-stirred to color homogeneity.

In order to cover the desired reliefs, the mixture should be applied a sufficiently thick layer. Works should be performed simultaneously over the entire base surface. If the wall decoration will be carried out with interruptions, the docking spaces of the frozen and new composition can be noticeable.

After drying, the texture paint can be coated with decorating acrylic compositions.

Manufacturers of paints

It is enough difficult to make an unambiguous conclusion about which paint for the inner walls is the best. When choosing any coating, it is necessary to take into account the specifics of the room in which it will be operated, the characteristics of the product itself and the reliability of the manufacturer. Sometimes expensive products have lower quality than similar materials (with a smaller price tag) from well-known firms.

In the modern market, you can find covers of excellent quality from most European manufacturers. For example, the paint of the company WandFarbe and Dufa perfectly showed itself. The Finnish paint for walls - Tikkurila and the products of the Polish manufacturer under the Sniezka brand today enjoys great popularity.

Domestic manufacturers also skillfully withstand competition with foreign products. The Russian paints "Eurolux", "Admiral", "Oleet", Bindo and others differ excellent quality and accessibility.

How to choose high-quality paint

If you think about how paint paint the walls in the apartment, pay attention to several criteria of your chosen options:

1. Reviews about the manufacturer.

2. Resistance to various external influences.

3. Complexity or simplicity of application.

4. Efficiency.

Understand whether a specific product is suitable in your case, you can look at its packaging. Usually, the manufacturer indicates the main characteristics of the composition and factors that can negatively affect the resistance of the color and the service life of the coating itself.

It is not necessary to give preference to highly cheap compositions, as a rule, they are the most short-lived.

For example, the high-quality matte paint "Oleet" has a price tag from 450 rubles for a 5-liter bucket. The paint for the interior "Maestro" will cost about 1,400 rubles for 5 liters.

For decoration of the internal surfaces, Oasis has a price tag from 1,700 rubles for 9 liters. Products of the Finnish manufacturer has a higher price tag, which starts from 6650 rubles for 5 liters.

Domestic water-emulsion paint will cost about 30 rubles per 1 liter, and the textural formulations (good quality) must have a price tag not lower than 950 rubles per 18 kg.

In this article, we considered the most popular characteristics and approximate cost. We hope, after reading higher infestion, you have no questions left for their choice. Successful shopping and easy repair!

The choice of varnishes and paints for painting the car begins long before the start of repair work. Much depends not only on the desired result, but also on the capabilities of the owner of the car. The characteristics of enamel differ, the technology of working with them - the decision to buy materials is fundamental.

The technology of applying and drying enamel may require temporary costs, special equipment, a certain humidity. Among the characteristics are distinguished: a spectacular appearance, corrosion protection, the durability of the coating and the durability of the appearance - find all these parameters in the list of advantages of one material is almost impossible. And if it is possible to achieve this in one product, the price of it immediately leaves the average indicators.

Characteristics of auto-produce

Henry Ford argued that the client can get the machine of the desired coloring while its requirement is a black machine. Historically, the first characteristic of automotive paint was corrosion protection, and not aesthetic appeal. The physical parameters of modern auto-email (material density, hardness and elasticity) are able to influence both the level of protection and the attractiveness of the coating. Select the following substances in the total composition of modern LCS:

• A binder is pure or dispersion, including a film former solution, the main task of which is to fasten the material.
• Film-forming substance is a pure natural component, synthetic or mixture.
• Solvent (turpentine, White spirit, solvent) - obtaining the desired viscosity.
• Painting pigments - car color.
• Special pigments - the effects of "metallic", "Pearlmutr", "Chameleon" in three-component painting.
• Fillers - finite volume and density (microtalc, chalk).

A binder, quantity and quality of the filler affect the hardness of the aircraft. The parameter is measured as a percentage of glass hardness - the average indicators range from 50-60%. Solving the issue of what firmness to stop, it should be sought in the nature of the intended exploitation: the harder enamel, the more unstable to the vibrations, the more difficult it is to polish. Decided to paint the machine with soft enamel waiting for the opposite effect: the ability of the coating is to withstand strong fluctuations and even the deformations of the metal, but the rapid loss of an attractive appearance due to scratches.

Acrylic paint

The basis of the material synthetic resins capable of forming a coating with good elasticity and hardness after drying. The material comes with a hardener, stirring which with enamel is needed according to the manufacturer's instructions. Due to the reaction with the hardener in enamel, a polyurethane grid occurs, which gives the enamel strength. The film has a good shine and resistant to chemicals (it is possible to wash it only specials. Solvents).

The list of shortcomings of acrylic authemali begins with high cost. Non-standard colors are selected by a tinting, requiring a separate board. Despite the high cost, it is required to apply on the car several layers of acrylic coating due to its weak crumbling ability. In return, the buyer may refuse varnish, since the durable shiny surface of acrylic allows you to do without it. The quality of the top layer acrylic directly depends on the hardness of the material, and it can vary by the manufacturer (HS and MS systems). Solid acrylics can do without varnish, but it is difficult to polish - with soft, everything is exactly the opposite.

If the question is solved about what enamel is better suitable for the protection of the car without taking into account the time costs, then one-component automotive paint on an alkyd basis is one of the most reliable means of metal protection. The coating is well opposed to the effects of the atmosphere, the sun, chemical reagents. The alkyd film is resistant to temperature drops, and its borders start from -50 and ends with +50 ˚C. The gloss of the film is comparable with the glitter of acrylic coating, at a lower cost, the absence of a hardener painting in the system (the material is simply applied to the car in 2 layers).

The durable film formed by synthetic resins is also a disadvantage of the enamel: the surface formation occurs faster than drying out the bulk of the substance, so the drying of the alkyd enamel lasts long. Professional use of alkyd coating requires a special drying mode with strong warming and good ventilation. Alkyd auto email forms thick layers, due to which it is necessary to put on a car 1-2 layer. Despite the good protection against the impact of the atmosphere, the formation of corrosion alkyd authemals will not be slowed down, therefore, should be laid on the primed surface.

Water-emulsion paints

The coating formed by the materials of this class is not dissolved by water, but for painting the car they fit weakly. Despite the presence in their composition of synthetic polymers, the material exhibits weak resistance to negative temperatures, although modern producers have noticeably advanced in this direction. Another obvious disadvantage is the need to primer the car before applying the material.

The advantage of the coating can be considered a high covering ability associated with the minimum painting pigment size. High adhesion reduces risks in the preparation of the surface: you can even paint the "water-free" paint. The name of the substance speaks for itself: the basis of the material is an aqueous emulsion, therefore, water evaporation is necessary for drying out. It happens for a long time and difficult, and professional equipment is required to provide high-quality drying process.

The material is better suitable for those who want to put the process of painting on the stream. Powder paint is applied according to a special technology, but the cost of equipment is justified to the extent that high-quality, waste-free production is necessary. Powder for staining is applied to the metal using magnetization and should then undergo a sintering stage in the polymerization furnace, but the coating formed to them is even, resistant to corrosion and chemical effects.

Colling powder is quite problematic, although the number of colors offered by producers reduces the sharpness of the problem. The technology does not require the use of hardeners and solvents, the surfaces and gerane remains on the surface. But due to the high cost of the equipment and the problematic of its manufacture, with your own hands (although this option is quite viable), for a single painting of the car, it is better to choose another paint.

If you feel about people who have never encountered a car staining process, you may not even guess about the huge number of different types and manufacturers of automotive paints that are present on the market at the moment. Technologies are improved almost every day, and regularly appear new and new colors and shades. After reading this article, you will learn to navigate the paint world and choose the best option for yourself.

Automotive paint is designed not only to decorate the car, it should protect the body from corrosion, which are caused by an aggressive medium. Different types of paint can seriously differ in the parameters of hardness, elasticity and even density. Protective qualities will depend on these indicators.

Each paint for the vehicle has three key components:

1. Pigments - substances that affect the form and tone of body covering. In addition, the pigment affects the rate of corrosion;
2. The substances of the binder type are components that allow the pigments to securely hold onto the automotive surface. They also constitute protection over pigments after drying the painted coating;
3. Solvents - with their help, paint has the desired level of wateriness;

The level of hardness of paints for staining of the vehicle can be determined relative to the level of glass hardness in the percentage ratio. The higher this percentage, the stronger the stability of the coating to any damage. Often the levels of hardness of paints of different manufacturers fluctuate in 50-60 percent.

Despite this, we should not forget that the more solid will be enamel, the stronger its flexibility is reduced and the probability of cracks on bends and vibrations increases.

What are car paints

Initially, paints from cellulose began to appear in the production of machines, which actively began to use at the beginning of the twentieth century. The main advantage of this paint can be considered the possibility of rapid evaporation of solvents at normal temperatures. This feature makes it possible to apply paints even in conventional rooms without compliance with the temperature regime.

Paint from cellulose

Despite this, cellulose paint for staining the car has a mass of minuses:

• high fire hazard;
• the need to apply 2-3 layers of paint;
• quickly lose brightness;
• to impart brilliance, it is necessary to polish coating.

Before applying cellulose enamel, the surface must be carefully sharpened, polished and coat with primer. It is best to apply paint to the paint sprayer. At the same time, as a rule, the ratio of enamel and White-spirit 50% to 50% is used. Only the final layer is better to make the fourth part of the enamel.

GlipThal type paint

Now cellulose paint is actually not used for body staining. Like cellulose, gliftile paints have been used for a long time. They include special artificial resins. Such paint got rid of most of its predecessor.

The main disadvantage of this paint can be considered a long drying at normal temperature. A day later, the surface hardened, but despite this, it remains very sensitive to damage and solvent. In order for the process to complete completely, you need to wait at least two to four weeks.

If you use drying at a temperature of 70 degrees, the drying time is significantly reduced, but this temperature is able to damage individual parts from plastic.

This kind of paint has increased sensitivity to the change in temperature and can strongly change the level of its viscosity. This fact also needs to be taken into account during the breeding of paints. Companies engaged in the production of paints can offer different yield strengths, but mostly need about twenty-five percent.

Acrylic automobile enamel

Acrylic paints for cars have more than fifty-year-old history. It uses an artificial resin as a basis, which is obtained from petroleum products. A thermal and heat-resistant varnish is highlighted.

The thermal deducer is applied only for staining the bodies in the plant and is not used for repair work due to a significant temperature that is needed for its complete burden. The thermal-dependent paint does not need to increase the temperature, and it is for this reason that it is often used for staining for repair purposes.

To key advantages, thanks to which Acrylic varnishes were seriously popular, it is possible to include excellent quality and homogeneity of the coating after staining, as well as the excellent level of gloss. Paint dries very quickly and after that it becomes extremely resistant to any kind of solvents. Among the minuses can be noted the poor ability to cover, which is why there may be a need to apply not one and two or three layers.

After using acrylic paints, you do not need to apply lacquer. It has very good reflective characteristics without it. But despite this, if you apply two or three layers of varnish, the effect of color depth to rise. Before you put the lacquer, you need to dry the applied paint and make a matte coating using a weak emery.

The solid paint from acrylic makes it possible to get extremely resistant to scratch with high strength. Also dignity can be considered a smaller shrinkage during staining.

Alkyd car enamel

An excellent value and quality ratio can be considered an alkyd paint. The main advantages of them can include a small value in combination with excellent resistance to damage, as well as excellent coating quality. The paint is simply applied, and in the end it turns out a rather thick layer, which reduces the number of staining steps.

A minus such paint can be called a drying time, which can be slightly accelerated by heating.
Metallized varnish can be considered the most popular option for paint for the machine. Despite the fact that this type of paint was invented for more than fifty years ago, it is often used to stain in the plants of even vehicles of the elite level.

What paint is suitable better?

Metallized paints are represented by varnishes consisting of two components that need to be applied at least than two layers. The initial layer will be the basis that the color of the car will be given and give a shade. The next layer will be acrylic, which will add special gloss metallic.

Pearl paints

Another options for paints from two components for machines can be considered pearl varnishes. They are very similar to the type of metallic type. In this case, the color can change its manifestations from fairly bright to almost black shades, depending on the angle of illumination and its power.

Metal particles are also included in the base of pearl varnishes. But their size is less, the number is greater and the location goes to the mass of the layers. The base should be covered with one or more layers of varnish without color, which will allow you to get a special shine and gloss.

The level of powder type paints is increasingly increasing. The process of staining of this kind of enamel will seriously differ from standard paints, and their quality and level of savings are much higher. At the moment, powder paints are used for secondary staining of the machine and its elements.

Powder automotive paints

Powder type paints for staining machines are made of dry mixed small paint parts. The particles exposed to the magnetic effects are applied by spraying on the body of the machine, and after that, acting on them with high temperatures, they are melted, because of which they form a homogeneous braid with high density.

The loss of paint with this method is extremely meager and constitute only a few percent, because the paint that has not been delayed on the body will be cleaned and reused. At the same time, this type of paint is fully safe for the environment and person.

The incredible number of shades and colors that now exist in the assortment of powder type paints can be resolved even the most demanding client. In addition, you can even get the surface of different types, including the Metallic effect. Just such paints allow you to change colors and paint not only parts of the vehicle made from metal, but also those made of plastic and even glass.

Probably the only minus of powder type paints can be considered the need to apply complex and expensive equipment in the process of staining. This eliminates the possibility of painting the car at home and increases its cost. But there is to take into account the quality of the coating and paint savings, then the costs will quickly be covered.

Paints for rusty surfaces

Sometimes in order to paint the details of the car that have been corrosion, use special paints. It can literally be applied directly on a rusty surface. At the same time, you will not have the need to complete corrosion from metal and primed the cleaned surface. It is enough just to simply clean the surface to remove the problem areas of rust and you can immediately apply lacquer.

In its composition, such paint has special acids neutralizing rust, as well as particles of glass that will protect the surface of the metal. In addition, the paint contains silicones that perform a water-repellent role. Manufacturers of paints for rusty coatings can offer to choose an extremely huge range of colors and shades.

Painting itself can be made by different methods, both using a simple brush from natural material and a spray gun or a cylinder. The paint should be applied in two, or even three layers, each of which dries about one and a half hours.

Water type paint

In the field of painting of vehicles not so long ago, new water-based paints appeared. They are only about a decade, but most of the world's leading car companies have already become painted by them. The advantages of using this paint can be considered complete environmental friendliness, because they do not apply harmful solvents.

Another very important advantage of this type of paints can be considered a wonderful surface covering. This is achieved due to the insignificant size of pigment particles. At the same time, the final level of the quality of the resulting coating is no worse than any other paints. A similar type of paints also has excellent adhesion, which can be applied to different bases, including other paint.

A long drying process can be attributed to the cons of water colors. In addition, due to the insignificant prevalence of the use of high quality equipment, painting like water colors will cost significantly more seriously than the usual staining.

The best global companies regularly invest in various developments, because customers constantly get the opportunity to use their new items. The quality of paint and coatings increases, its service life, as well as environmental performance. For example, a hybrid system was developed by the famous Japanese company Kansai, which makes it possible to exclude many toxins from the paints.

During painting machine with metallic or pearl, it is recommended to use paints of only the best manufacturers, because their technology is quite complex and may well be unavailable for poorly developed manufacturers. The result from inexpensive paint is often not at all the one that you expected. If you use alkyd or acrylic type varnishes, that is, a chance of significant savings in the event of a choice of a low-foot or not highly well-known brand.

If you consider a very large number of manufacturers of automotive paints, now any owner of the car will be able to choose the right version of it, which is suitable for both the price and quality. The newest technologies that have received widespread use in the manufacture of paints make it possible to get a great result even without the help of professional masters.

At this point, you can safely declare that I have gained this article received all the necessary knowledge about automotive paint, which will help you make the right choice and not mistaken.