Good day! I understand that this weather does not contribute completely, but sometimes you need to think a few steps forward and think over the coming warm season in advance. Therefore, we will talk about such a construction as a tent trailer.

These are excellent special-purpose car trailers. This is the easiest option of the cottage, which is available to car owners.

I propose to discuss the variants of such trailers, their features, disadvantages and advantages.

Available options

Recently, a new round of development has been received by car in Russia. Increasingly, people leave for nature, without stopping in hotels or some cottages, and move on their own wheels, where they spend the night, relax, the time is having fun.

After all, car trailers, which are a house on wheels in different variations, actually offer much more than it may seem.

Tourist service is quite expensive, with which it is difficult to argue. Because trips to rest with the condition for renting a house costs a round sum. But mostly people spend their vacation in nature, and the houses are designed for overnight.

The tents perfectly compensate for the lack of sleeping places. Having at the disposal such a trailer, you can:

• traveling on a regular passenger car;
• do not rent houses, cottages and not shoot numbers in hotels;
• spend time in nature;
• independently choose places where you will stop, relax and spend the night;
• sleep in the place protected from weather factors;
• cooking, eat and wash the dishes in specially equipped places within the tent, etc.

Just be sure to follow And do not forget about the requirements of traffic rules.

There are extremely simple designs that only create a canopy and provide people with bedrooms. But there are much more advanced autographs, where combined:

• sleeping area;
• furniture;
• lighting;
• washing;
• kitchen surfaces;
• hob equipment, etc.

All tent trailers intended for a passenger car can be divided into 2 categories:

• purchased;
• homemade.

If desired, everyone can buy a suitable auto trailer and use at its discretion.

Let's consider each of the options and solve, which is still preferable.

Homemade

Tent trailers enjoy in high demand in hunters, fishermen and travel lovers on their wheels. They attract their accessibility against the backdrop of more complex houses on wheels.

Take for comparison . It is quite expensive, but a functional solution. In this case, such trailers are very compact and limited in space.

The tent allows you to repeatedly increase the trailer area, which is used as the basis.

To create such a design in the form of a trailer with unfolding tents, you will need drawings, different materials and the base. As the basis of the route can be used:

• any side trailer;
• etc.

Often they are assembled on the basis For hunting, fishing and recreation. Models use in demand and.

Video and photo materials usually help to figure out in all nuances of the assembly. A very often homemade trailer tent is completely not inferior to factory counterparts, but it costs significantly cheaper.

Once I started talking about a positive side, I will call the main advantages of assembling the tent with your own hands.

• This is a subject of pride. I believe that this is a very important advantage. Especially when the tent really gets high quality and original. We look at your creation and understand that I will not sell it to anyone. And if I sell, then only for huge money;
• Adaptation for yourself. You can use your own drawings, select materials and components only of this type that like you. It allows you to create a vehicle for tourism, fishing or hunting that will satisfy your personal needs as much as possible;
• Low price. Here you can easily argue. But practice shows that the cost of homemade structures is usually less than the purchase of a finished analogue from the manufacturer.

But do not think that everything is so good and perfect.

Objective shortcomings

There is a reverse side of homemade trailers to pay attention to.

First, it is difficult. Yes, nothing simple in the assembly of any trailer is not. Do not think that after viewing one video you will be an expert in the manufacture of even the simplest options for tents. So here you need certain skills, skills, knowledge and experience.

Secondly, it's not so cheap. For the price it goes less than a number of finished products. But the difference is not so significant. Tens of thousands of rubles save you can not. Or only in cases where you will apply frankly cheap components, an old rusty trailer, etc. If you want to get a decent tent, you will have to invest a decent amount of money.

Thirdly, problems with documents. Inspectors on the roads may find fault, if the vehicle fails, due to the change in the design. After all, on the documents you have a regular side trailer, and on the fact it is a full-fledged folding house on wheels.

Think yourself, decide for yourself.

Finished trailers

The next option is to purchase a ready-made solution from the manufacturer. This is an option for those who frighten the prospects for self-making a tent from a passenger trailer.

I will be honest. I fully support this particular option. And I will try to explain my position.

The only thing, and also a controversial, disadvantage of this option is a high price. But here you are understandingeat, for which you give your money. If you plan to often use a trailer, then money invested in its purchase will be fully justified.

Today the market offers a huge number of excellent tent trailers:

• Picnic;
• Viking;
• CAMP-LET, etc.

Special are also sold , whose feature is the ability to pass through the most difficult areas of the road. This gives objective advantages over other travelers, as you can go further and really alone with nature.

Now let's briefly about the advantages:

• • a huge selection for every taste and wallet;
  • official documents and all permits for operation;

• high build quality;
• quality assurance;
• reliability and durability;
• wide functionality;
• the use of high-quality materials;
• the ability to select additional components;
• individual order service, etc.

Clothes, hiking utensils for cooking, various equipment, will not be able to understand and evaluate the convenience of such a vehicle, as a tent trailer. Photo models for the family or for one person prove the popularity and convenience of similar modules on wheels.

Let's start familiarizing with the "pluses"

To the so-called "mobile homes" you can count the following:

• passenger tent trailers;
• aVTODACHI;
• tourist trailers;
• transformer trailers;
• houses on the wheels.

Depending on the size, such mobile rooms can be used for temporary or seasonal residence of small work brigades or country rest lovers. Some most comfortable models are equipped with not only kitchen plates and toilets, but also with double beds and additional children's places. In the most expensive models there is even a campaign shower.

The presence of a plate running from the gas cylinder, a drinking water tank and a small refrigerator make a mobile home even more convenient.

A large plus can be called the presence of a built-in tent and a canopy of water-repellent material. The whole design is quickly installed on special steel supports. After assembly, an additional kitchen and dining area is formed.

The tent trailer is towed by any car. Inside the folded module, you can place the desired amount of cargo, provisions, clothing, bedroom, sports, tourist, fishing or hunting equipment, folding chairs and a table. Even the fact that there is no need to unload the contents of the trunk between the trips, adds points to such a device as a tent trailer.

Without minuses can not do

To the negative qualities of this category of mobile devices, you can rank a small loading capacity of some ready-made models. In addition, when moving around the country track, the speed of moving a car with a trailer should be less than 80 km / h. You must follow these values \u200b\u200bfor your own security.

In addition, for the transportation of heavy (over 750 kg) wheels are required for the "E" category in the driver's license.

When choosing a residential mobile module, it is worth paying attention to the correspondence of its sizes in the margin of the gabarites of the towing machine. Yes, and about the garage as about the place of permanent parking, it is worth thinking in advance, since the tent trailer occupies much more space than a regular sleeping bag and all the hunting equipment combined.

Mobile tents are mostly designed for use in the warm season. If you plan to travel to the cold, the mosquito net on the windows should be covered with a dense polyethylene film. For long and permanent trips, the real house on wheels is best suited - an autotrailer with all amenities.

The tent trailer do it yourself: is it possible?

Our people know how to do everything! Why buy ready-made autodachi if you can make a cart "for yourself": in accordance with your requests and ideas about comfort and convenience?

As the basis, you can take a frame on the springs from the usual car drive to the wheels from the "UAZ". In order for the mini-trailer to manage when a cool slope, it is necessary to remake the fastening of the wheel pair into the swivel. By installing the brake system, it will be easy to control on the road even a fully loaded automotive.

Trailer tent do it yourself: what else can you add

• For a convenient location of various cargo purposes, you can arrange sectors-compartments of suitable sizes.
• On the hut, the cylinder with propane is easily placed.
• In the luggage compartment placed a tank with water.
• A hiking gas stove and a wicker is attached to one of the folding sides and the collapse.
• You can additionally install the retractable table.

Supports and awning during the trip are in the folded state, when installing a tent-trailer is converted to a residential minicomplac with a dining room, kitchen and bedrooms.

Where, when and who can use a tent on wheels

Not everyone loves to travel for several days in the tightness of the car salon. However, there are supporters and such a vacation. Beautiful and new landscapes, the permanent change of impressions is a wonderful rest from the casual routine.

The trailer tent is designed to create relative comfort travelers, hunters and fishermen. The beekeeper at the exit to the remote apiary perfectly surrounds in such a mobile house. Yes, and flasks with honey freely fit into the cavity of the trailer.

Taking with it a small heater working from a car battery, or a tourist gas burner, you can wait in such a hiding dwelling even a few days of bad weather.

The experienced travelers know that it is not always possible to be cheap and comfortable to spend the night. Therefore, with long journeys and the availability of your own car, the sin does not buy a hitch and not pick up the cottage. In fact, it is a house on wheels - such a small number with a kitchen, toilet ... Well, in general, with all the subjects of civilization. In such a mini-hotel, you can do something conveniently to spend the night, but even make food for several people, and dine there, and most importantly - completely free! And today we will look at how the trailer cottage is done with their own hands.

Chassis and frame

The main component of any trailer is a frame. It is on her that all loads from the metal body (house frame "), and the bridge, beam and wheels below. By the way, on the chassis, you will not have any special difficulties, because the trailer design does not have fundamental differences from the car system, with the exception of motor aggregates. Therefore, when the trailer cottage is done with their own hands, as a running system, you can wholely "snatch" part of the wheels, spring and other pendant parts with a old car. For such a vehicle, any model of the car may be suitable, be it "Volga", "Moskvich" or "Zhiguli".

How is the trailer dacha do it yourself? Design of rooms

And if the algorithm for the design of the trailer-giving from the usual cargo variant is practically no different on the stages of the structure of the running system and the frame, then the body may have difficulty. The fact is that the homemade trailer dacha should really be comfortable and practical, therefore, in the drawing, you need to develop a design plan and the location of all parts. Specify where the bedroom will be, the kitchen, and if it is a frame with a length of 5 or more meters, you can additionally install the bathroom. However, remember that each new room entails additional waste, and therefore the price of a finished trailer will be significant. Moreover, to legally ride in such a coupling, you need to register this vehicle in the traffic police. And this is at least a few thousand dollars from above. Therefore, do not overshable your trailer extra devices.

Options for dunklement

The most practical version of the self-made trailer is the design that the built-in framework is located on the side (remember about the legendary Soviet Scythian). When it is in the deployed state, it turns out a kind of big tent. This significantly reduces the cost of work and effort spent on it. Such a trailer cottage, with their own hands made, very functional and at the same time convenient to use.

Traction Coupling and Illumination

At the end stage it is necessary to take care of how the finished design will be attached to the car hook. Also, the homemade trailer dacha must have a couple of stop signals and turn signals. In the center or on the side, consider the location for the license plate and spend the backlight to it, the best LED. Such a trailer cottage on wheels will definitely be the best hotel for the traveler.

fB.ru.

Dacha trailer with their hands from a passenger trailer

Dacha trailer for car

Those who love to go beyond the city on the car with overnight know that in the car it is not convenient, so you need to take a trailer cottage with you. It is a house on wheels, it can be spilled in it, cook food, protect yourself from rain and snow. There you can put a large bed and have a great time. The trailer cottage itself is very convenient.

There are many manufacturers that produce different houses on wheels. But they stand quite expensive, sometimes even b. y Trailer cottage also cost big money. Therefore, many craftsmen make a trailer to do with their own hands, inventing their design. For each individual case, your kind of trailer-cottage.

Pros of trailer manufacturing do it yourself

Unlike the factory trailers, cottages, the homemade options have its advantages:

• When a trailer cottage is done with their own hands, then it feels the soul of the one who did it, so it is more comfortable.
• Making a trailer dacha you can make it the most convenient for myself.
• The most important plus is the low price of production, and the functionality can be made maximum.
• The design is made taking into account the possibilities of the car.

Inexpensive option of trailer

The most simple and inexpensive trailer tent is considered. When it is complicated, it looks like a simple passenger trailer, and if you decompose it, the awning roof appears above the trailer and slightly further from it.

To make such an autocumper you need to buy a factory trailer, install fastening elements on it for the base of the tent, make the folding porch to make the room. Here the main thing is to make a tent in size to the trailer.

In order to equip the intraparal space, the inflatable mattresses and folding table will be required. This is quite enough for fishermen, who went fishing with overnight. In such a tent, 2-3 people will be able to spend calmly. But in winter it will be cold, so such a trailer cottage is suitable only for the warm pore of the year.

Capsule

In the database, there is also a regular passenger trailer, but in the end it turns out a more solid dwelling. This will already be full walls with the roof. In such a trailer, you can even live for a while. You can make several windows for convenience. The tent must have all the necessary household goods such as a gas stove, dishes and other accessories.

To make such a capsule, you need to remove the sideboard. From a metal corner to make guides and weld them to the trailer. Next, you need to make a frame and consolidate it.

So that the capsule has a rounded form, it is necessary to cut it from a special moisture-resistant plywood. At the top you can make flooring, put the doors on the loop, the windows can be made from polycarbonate or plexiglass.

All items must be treated with sandpaper, then you can paint it and apply lacquer. 2 people can easily fit in such a capsule.

Dacha trailer

If there is a two-axis trailer, then it is possible to build a wooden house based on it. So that everything went smoothly, we need a wooden bar, plywood, metal tile, waterproofing film. A frame is made from a wooden bar at first. Next, the video where the guy makes the cottage with your own hands:

Next, everything must be done according to plan:

• Frame to hide the waterproofing film and sew plywood.
• The roof must be made of metal tile, you can also use professional flooring or ondulin.
• The walls of the house should be coated with a layer of waterproofing, after which the house is separated by clapboard or plastic siding.
• Put the door, cut windows and equip the interior to your taste.

This is a large trailer cottage, in which several people and even the family can easily fit. In such a country, you can live from spring and until the end of autumn. In winter it will still be cold.

Auto cottage from the station wagon

If there is an old car in the body of a wagon, then it is not necessary to donate on scrap metal, you can make a trailer cottage from it. The main thing is that the rear of this station is in good condition. It is necessary to cut off the front of the unnecessary car, and from the back of the trailer.

First you need to make measurements of the future trailer, so that the length is suitable in order to fit it comfortably. If everything is done correctly, but it will be a multifunctional trailer where it will be possible and swell.

The front part should be enhanced by a rigid frame from the steel corner around the perimeter, and also need to sew the front of the iron sheet, nookynyak, can and plywood.

From the front, at the bottom you can install a traction coupling device, usually make it from a chaserler. The entrance door will be the trunk lid, and the side doors can be used to load things.

So you can do the most trailer dacha, you can even do it yourself, the main thing is that there was a fantasy and the desire to create something unusual. The house on wheels is very convenient, you can always leave the city bustle of nature and live in a fairly comfortable environment.

The only problem is possible that the registration authority does not want to register such a trailer, because it, as it may seem, will not meet the safety standards on the road. Therefore, the easiest way is to take a used trailer dacha and remake it, while preserved documents.

Own mobile cottage-house on wheels

In Western Europe and in the US, life, travel or holidays in the company at home on wheels have long been widespread. Owners of such houses do not chase large dimensions. In the trend, there are small houses on wheels, but multifunctional so much that they can focus on themselves, produce electricity and heating using solar panels on the roof and so use every centimeter of space that a two-story van with an area of \u200b\u200bfoundation in 14 square meters looks quite complete housing.

Who is an adherent of life on wheels in a mobile home

In the West there are no pronounced preferences, however:

• youth more often uses such a way for accommodation, but for traveling and recreation, as traditionally touches the city's cycling life and does not need privacy;
• the families in whom children will grow up more tolerantly look at such a mobile home, because it is able to solve some financial problems, especially in the conditions of crisis, unemployment and more than high prices for the content of housing, as well as products;
• active pensioners - they are perfect consumers of style house on wheels. I can drive with pleasure not only in our country, but also on accessible abroad.

Trailer cottage on wheels in Russia

In Russia, it was recently used to use fashion at the wheels. The direction is developing very slowly. First of all, because of the cost, because if there is a house on wheels in the west, it is really affordable housing regarding real estate prices, then in Russia such vans are more expensive than a good apartment. In addition, more than half of the population lives in conditions of harsh winter, and insulated houses on wheels are often standing like 2 apartments.

Mobile houses are conditionally divided into classes that describe the category of capacity, internal filling and comfort:

• class A - externally similar to the bus and closest to the usual housing;
• class B - here includes a trailer, fully equipped inside, the sleeping place is directly in the trailer itself;
• class C is a small-sized, created for movement based on an off-road or a passenger car, while the car's cabin is transformed into a sleeping place.

The most fiscal of the currently existing options is a tent trailer, which disassembles the site of the campsite directly around the trailer.

But, if equipped home-trailers are not available for many, then the dacha on the wheels is more than the real option.

See also: Selection of sliding windows for glazing the terrace

DIY house-transformer

The folding house-transformer on the wheels of a passenger car will be a design of a shield house, which can be folded or removed from the walls along the side. In this case, such a house becomes like a big gazebo. Domestic amenities include table, sofas or bed, gas stove and stationary water supply.

Whatever the option of the trailer houses is chosen, the mobile home on wheels will become with their own hands not only the subject of the pride of the owners for their work, but also will give new opportunities to spend the weekend with the family. After all, in order to get on nature, it is not necessary to have its own plot of land. You can easily travel and stop in the most attractive countryplaces.

How to make a house on wheels do it yourself

The most compact, simple and budget option is a design on a uniaxial trailer. Given the mass limits for light trailers in the Russian Federation to 750 kg, it is necessary to choose a durable and lightweight material.

For this purpose, pine is well suitable:

• The frame is made of paving stones.
• The walls are trimmed by plywood, the optimal thickness of the sheets is recommended in 1 centimeter.
• For furniture - tables, beds and shelves are also used plywood sheets.
• The outer finish will be from galvanized sheets of steel, installed flashes.

As an option, you can use another building material for facial sheathing, the main thing is that it has sufficient strength and flexibility.

Read also: Facing the facade of the house: what material it is better to choose

Between the outer skin and the frame, you need to place a layer of mineral wool, mineral plate or other insulating material to keep the microclimate inside, especially in hot weather, when the design is able to warm out inside with a metal sheatrusion.

Dacha trailer with their own hands - Mobile house mounting

The installation of the design is carried out with the help of self-tapping screws, weaknesses, such as outer angles, are strengthened with a metal corner.

Protection of materials includes:

• antiseptic strengthening impregnation for wood material;
• sealing of seams by the silicone composition of the external sheaving;
• painting face.

The sizes of the trailer can vary, the optimal can be called 2.3-2.4 x 1.5-1.6 m.

Building a house on wheels

The construction of autodackets occurs in two ways - on the trailer itself, it should be dismantled for this, or on a special stand, followed by an installation on the trailer.

The windows are recorded at the design stage and can be of different configurations - from sliding to folding.

Carrying is ensured by installing mosquito net. Additionally, you can consider the setting of the hatch in the ceiling.

A more solid decision will be a trailer-house on wheels with a base of a biaxial trailer. The principle and methodology for the manufacture of such structures are similar to construction for the trailer on one axis. Of course, more material will be required, therefore costs will increase in proportion.

ATTENTION, only today!

landshaftnik.com

Mini camper trailer cottage with your own hands. Detailed plan

This project is intended for tourists and travelers and is a design that protects against extreme weather conditions, a small available autonomous home for homeless or affected by natural disasters. The camper can be easily constructed from SIP (structural insulation panels) and from publicly available materials. Low cost and super warmed for year-round accommodation in extreme weather conditions. This is a mobile home that can be parked anywhere and be housing while eliminating the effects of natural disaster. This small lodge on wheels is also intended for people who are engaged in outdoor sports or are looking for adventures in extreme conditions. Because of its light weight, super isolation This trailer is perfect for people who have kayaks, mountain bikes and other equipment that they want to take with them.

This camper is designed for extreme weather conditions and so well insulated that it can be heated only by heat or a small heater intended for use in the room. With a white roof and forwarders, it will remain cool in the summer when parked under the trees.

The best of all, the camper was built on the basis of the trailer of 120x240 cm, and the material costs for the camper do not exceed $ 1000 depending on the materials used.

Full step-by-step plans are available below.

These drawings require basic construction skills, and you assume all responsibility for any use of these plans.

1: What makes this camper so special?

Cabinets for storing above bed legs with space for a small LED TV or tablet, iPad with speakers or radio and DVD / CD player or this space can be used for boxes. All devices will be powered by the solar panel, which is located on the front of the van.

The camper has 100 cm at a 205 cm bed, which is sufficient for two people and is very comfortable for one person. Over the headboard, open storage shelves and two LED positional light sources for reading. Built in the wall in the bed integrated folding table for food or study.

The mobile home has a door for easy access and the window of the window, so you can see who is outside the door, but a small enough thing that a person (or bear) cannot break and open the door. There is a window and on the opposite side for light and ventilation and an inclined deftlector on the roof.

Usually the walls of a small autofurgon with a 5 cm thick with isolation and are not intended for extreme weather conditions throughout the year of use. In this camper walls and a roof of 10 cm thick, with thermal insulation (more than in most houses) and this will allow a person to stay in warm cold in winter and in a coolness in a hot summer. In most cases, only the heat of the body will provide comfort in the campaign, but it can also be heated with a small propane heater. White roof to reflect heat, roof ventilation and side windows for passive cooling. There is a place in the outer walls for installing a small air conditioner if you wish, but if you park a camper in the shade of trees, there is no need for air conditioner.

In Ceper, the back is provided with a kitchen for cooking, which includes sink, cutting board, water canister, single-flow propane / butane plate and space cooler. For storage there is a lot of space for canned and dry products, saucepan and dishes.

You probably saw other small campers and mobile homes, but you have never seen anything like that, because it is made of SIP and has super isolation and strength, while maintaining the weight of towing to a minimum.

This residential trailer is designed for towing small cars or trucks, the base of the trailer is 120 × 240 cm, so it can be parked even in a standard parking place. It has a super strong 10 cm thick roof with trunk and fasteners for kayak, mountain bikes, skis. The design of the trunk on the roof is included in the drawings or you could use commercial racks.

The trailer of the camper is designed for 100 watts (or less) Solar electric panel, which is attached to the front of the camp, it can be tilted for better access of sun rays, and it can be removed and stored in a van when traveling. In the 100 Watt panel and one or two deep cycle batteries and the inverter will provide the required power for your gadgets, such as a laptop, a mobile phone, a window fan, LED lights, and even a refrigerator and kitchenware.

The camper has a pad on the nose of the trailer, which is used to store the propane cylinder, batteries and a portable toilet or other elements that may be needed for long-term camping or permanent residence.

The vehicle is designed specifically for extreme weather conditions and is intended for long-term year-round housing for people who can live in a van within a few months or years.

The best thing Cupper is the ease of creating from publicly available materials by the main tools and people with basic construction skills, so that you can make one for yourself or they can be quickly produced for housing homeless or eliminating natural disasters.

Now let's build like that! Below are detailed plans and drawings for which you can easily create yourself such a camper.

The drawings include more than 60 schemes step by step, it is easy to follow these instructions. I donate on the development of the site, you can see the full version.

The camper was originally designed as easy to assemble, inexpensive and protecting against extreme weather conditions of tourists. This camper is light enough and can be towed by a regular car or pickup and takes place in narrow places.

In contact with

yDAChadacha.ru.

Simple travel trailer. - Community "Trailers" on DRIVE2

As the basis of construction, an ordinary standard trailer is taken. Body width 1200 mm, length 2400 mm. Task: Overnight to 4 people, plus the transportation of goods. Trailer category up to 750 kg.

For construction, two rolling doors were purchased, 30 30 mm bars, galvanizing, roof plywood and other details.

Full size

The manufacturing tool is also selected.

Full size

And so begin the assembly. We set the rack 30 by 30 mm, 1430 mm high. And screw them to the sides.

Then set the framework.

We install the side of the shovel and rear, Stelim Phaneur on the "second" floor. It will place for the night two people.

After we did, cover the awning for passing protection and then cover the entire trailer with zinc.

And at the end we set the finish from the allyminia profile.

The trailer is ready.

In the future, depending on your desires, you can install on the trailer, window, trunk, you can decorate your trailer with a film and much more.

Full size

Also for a depth night two people, you can set the cover on the roof of the trailer, install the awning and premises are ready. If you do not spend the night there, you can use it for the transportation of goods.

Full size

Inside the trailer, you can place two people on the roof of two people, inside you can also place a small retractable kitchen and table. There are many options.


Here is such a simple option for a beginner traveler, in the future if you understand that the journey is yours all, you will make yourself a trailer better, and this one can use, for example under the workshop.

Well, I will put the video.

www.drive2.ru.

Idea to create trailer trailer with your own hands

Traction for traveling is practically in each of us. Some implement it by purchasing a full-fledged home on wheels, and others make trailers with their own hands. We suggest you look at the wonder trailer, which is made from an ordinary car trailer. See how the trailer is transformed.

From the trailer, only a frame was originally left. All other details were removed as unnecessary.

Then the wooden base was installed on the frame.

Starting wall installation.

Dropped doors.

The roof is mounted.

That was the trailer before painting.

The inner decoration of the trailer.

Trailer in the process of painting.

The door also serves as a basising holder.

Inside the trailer oven. So you can cook right inside. Yes, and from small cold weather you can escape.

Front viewing window. Spare wheel and bin for technical purposes.

Panoramic view of the insides of the trailer.

lifenatural.ru.

Communities\u003e DIY\u003e Blog\u003e Caravan walls are set (materials, technology). Off-road tourist trailer do it yourself - Ch.7

Friends hello!
Summer ended, hurried to complete the frame before the rains arrive, therefore I did not post the information and video for a long time. My caravan is already put on the move of the wheel, and even managed to ride in the Lipetsk region for testing it in the field.

Before the story about the tests, I will still come out, but I can only note that the tests were very good! I am really pleased! Fuel consumption on the car on the highway 9-9.5l. In the coupling with a caravan, without a caravan 8-8.5l. It depends on how to harm on the pedal. City with caravan 13l. Without caravan 10-11l. Well, okay, I will not tell everything here, and then it will not be interesting! :)))

Let's go back to the theme of the homemade house on the wheels. After I finished the floors, I started the construction of the walls. To make the walls with me exactly, I first put the rear wall and put the side walls to the back wall. When I got everything on the diagonal measurement, I put the front wall and began to cover the roof so that the walls were not loosened. After that, I put the partition between the cabin and the luggage compartment. And then I came to mind to make another extra bed, instead of huge lockers, where there will be so much to put so much.

Off-road house on wheels. Real wall set.

Off-road trailer: Side walls are delivered and future caravan shapes are defined.

On one wall I had 3 sheets of plywood 15mm. Each sheet weighs 25kg., That in the coupe 75kg. This is in principle a little, but still extra weight is not needed, and the punching plots are better filled with Paulinor's sprayed insulation than left 15mm. Phaneur. The thermal insulation coefficient in Polynor is an order of magnitude higher than that of plywood, therefore perforifying the walls I kill two hares at once. 1. I facilitate the design, 2. Wheel house will be warmer. Well, it is not all the harm of the rigidity of the frame, since two partitions are ahead (outer wall + partition of the luggage compartment). In addition to the walls, inside, in the middle of the module there will be two additional gain, I will tell you a little later. Such a design will not declare the walls on strong ughab and even protect the frame from the lateral strong impact, for example, about a tree. Those. Having received a good side impact, without such a strengthen, the frame may be a bit in the opposite direction, which will later lead to the framework of the frame, the gaps will appear and the caravan will gradually begin to completely collapse, and that this does not happen, I have had different types of gain. I'll tell you about it and show.
After perforation of the walls, which I performed the jigsaw right on the spot, I began to pasting the outer wall with a galvanized sheet of 0.4 mm, gluing it into a polyurethane sealant Soudaflex 40 FC. When perforation, it is important to understand how you will have sheets to lie, so that the sheets of sheets do not fall into the place of perforation and emptiness has not formed there.

Homemade house on wheels: Work on perforation of walls to facilitate the design.

But before pasting the walls of the walls with a galvanized sheet, I indulged aluminum profiles 20x40 vertically. The goal was pursued to give stiffness to the frame so that the windows and the door were sitting in the frame from the profile, so that with further finishing and additional rigging of the frame could be attached to something. Also, such a method helps to fasten the sheets among themselves, the size of which is 152x152. Two of which lay down + superstructure over them to achieve the desired height in the caravan.

Blowing at home on wheels galvanized sheet 0.4 mm

Separately, I still take off the video outside to show the walls of the walls of the walls to the frame, so that it was clear how and in what places I enhance the walls in order to avoid the swing.

The battery complied with a wonderful accumulator to the caravan on the Runduk Caravan.

Building floors in caravan (materials, technology). Off-road tourist trailer do it yourself - Ch.6
We will be erected by the frame of a residential module (materials, technology). Off-road trailer Navahi - Ch.5
Off-road NAVAHI trailer with their own hands (protection against corrosion) - Part 4 - Record removed (not straining can be found)
Off-road trailer NAVAHI with their own hands (refinement of the frame, a module company) - part 3
Navahi off-road trailer with their own hands (Lifehak how to flip 300kg alone) - part 2
Off-road Navahi trailer with their own hands (frame, brakes, corrosion protection) - Part 1
Off-road navahi trailer with their own hands - accession

www.drive2.ru.

Expedition trailer. - DRIVE2.

So dull ...

So, after another trip to Karelia, the construction of an expeditionary trailer caught fire. After each evening, turn over in the car the entire Schmurdyak for the bedroom device, and in the morning everything is re-released.
A brief TK looked like this:
In the trailer, we sleep, prepare and eat. Transportation Skarb (tents Bedrooms-awnings, etc.), products, chainsaw stoves, etc. With maximum protection against moisture. Lodka, motor, catch and other stinking cakes-in separate volume.
I hide under the awning of heat and precipitation. The trailer should not limit the geometric patency. Preparation of the bed and kitchen should take the minimum time (up to 5 minutes).
And most importantly, with your own hands. Is infirmized materials. In the garage.
He studied very poor information in the internet, figured to our experience of auto-trailers.
Built with a comrade. Hell, of course, but under him.
Surprisingly, but everywhere, wherever we stayed with our trailer, the fellow citizens have a huge number of questions, from primitive "why?" to pleasing hearing and pride "How?"
What for- I wrote.
how-here:

www.uazpatriot.ru/forum/v...ewtopic.php?f\u003d153&t\u003d21174

I will add that, due to systematic non-interest operation, the trailer is under constant upgrades.

Actually, here:
Video:

Tags: trailer, expedition trailer, UAZ Patriot, Travel

Like

www.drive2.ru.

travel trailer with their own hands video

2 MeC Back

This is the onboard trailer MZS 817701 for passenger cars, small, with a body 2453 × 1231 × 290 mm. Past summer ...

2 years ago

How to make a simple travel trailer. Links to Gennady: https://www.youtube.com/user/gennadi35 https://www.drive2.ru/users/prize...

6 MeC Back

Tourist trailer do it yourself. Continued.

2 MeC Back

Tourist travel trailer. In which there is a sleeping place, a kitchen block with a sink ...

8 MeC Back

Trailer for tourism and recreation. It has a kitchen and a full-size double bed.

4 MeC Back

The passenger trailer with their own hands, a very popular direction of folk art. It is described here all

8 MeC Back

continuation of the review .. Winter .. Part 2. House on wheels do it yourself, for fishing, leisure, traveling .. Fisherman ...

4 MeC Back

Tourist trailer tent is sold with their own hands! Tver Price: 30 000 ₽

6 MeC Back

Overview of the homemade house -price, built on the basis of the factory basis.

7 MeC Back

One day the retro car restorer decided to make a house on wheels and became a Ukrainian innovator. Pavel…

1 years ago

building a house on wheels with your own hands, for fishing, leisure, travels .. The fishing store "Blind" ....

10 MeC Back

I sell a trailer !!! https://www.avito.ru/barnaul/gruzoviki_i_spettehnika/pritsep_dlya_rybakov_i_ohotnikov_sledopyt_1424973151.

4 MeC Back

Step-by-step assembly of the trailer of the SUV. Our channel: https://www.youtube.com/channel/ucsksyiu1ra3xhnr1uf8tazq Our page on Facebook: ...

4 MeC Back

Tourist trailer do it yourself. Dodelan.

2 years ago

Trailer do it yourself.

6 MeC Back

The second part of https://www.youtube.com/watch?v\u003dmq9kyt9f0a4 third part of https://www.youtube.com/watch?v\u003d0wg0ra-howy.

11 MeC Back

Not fully made as conceived. But the test passed and the project will be completed by the next season.

1 years ago

Self-knitting tent on Krischi Renault Traffic riojuanova on 4 Doroslih cholovіka. The location of the federated virgin ...

2 years ago

The trailer sold, the reasoning about the price is not relevant.

3 years ago

House on wheels do it yourself. Trailer for tourism and rest with their own hands. Trailer cottage with their own hands. Autodom ...

Kitchen headset from DSP with their own hands - a kitchen headset with their own hands - the manufacture of a kitchen headset (+ photo)

Homemade cottage trailer made from car trailer: photo of the construction of a camp with a detailed description, also video in which the house is shown on wheels.

We decided to build a small residential building on wheels to ride a car on your car. Since we did not have the drawings of Ceper, we decided to make a removable module on the factory trailer (so that there were no problems with the re-registration of the vehicle).

For this was purchased boat trailer of the Kurgan Plant (Only they have no clarification in TCP, what a trailer is. Just a trailer, other manufacturers it is indicated that this is a boat trailer and the house will not put it).

The dimensions of the module corresponded to the sizes of the trailer - 1400 x 2400 mm. Naturally, the removable module should be durable, and for our roads, the plywood house will definitely not go, I had to weld the steel frame.

The base was welded from a profile of 60 x 30 mm, walls and ceiling from a profile of 20 x 20 mm. 2 identical arcs bent on the pipe bender.

The most difficult thing was to think about the doors, on the doors we left 1 \\ 3 of time from the total spent. Who was interested in this topic, by anyone saw on American trailers factory doors, hatches of ventilation, gas stoves, sinks, heaters, etc. etc. The problem is one: the cost. One factory door costs about 700-800 bucks (and they need 2), the hatch into the roof with an exhaust of about 300-400 bucks, the sinks and the plates did not even look, and it became clear that we would choose what we would find in the host stores .

As a result, the doors did themselves, because with our course, the budget only on the door went out more than 100 thousand (on Alik, Ebey, in Europe, America, Russian online stores - prices are approximately the same).
Doors decided to do with windows, because This is the easiest way in our opinion. It makes no sense to describe the whole process, I will only say what the doors were very vigorously. But at cost, they left rubles at 5 each door, taking into account the whole. saving of that cost)
Outside, the housing was trimmed with aluminum sheets of 0.8 mm, they searched specially large sheets, so that you could cover with one sheet without junctions. As a result, the ATS2 sheets were found in the size of 1500 x 3000 mm, which was quite satisfied.

Now I would choose a composite material for facing buildings, a thickness of 4 mm (who does not know, it is 2 sheets of aluminum 0.4 mm, and between them a special composite, which is ideally withstanding all weather phenomena).

Aluminum on the plywood substrate was shoved, rushed around the perimeter and sealed all the joints. It was possible to leave an aluminum trailer, but initially wanted blue outside, so they ordered the vinyl film for tight vehicles in the printing house and covered on top.
Many asked about the fridge. No refrigerator, and can not, because The module is removable, it has its own car battery. The module wiring is completely autonomous, and in no way connects to the wiring of the machine and the trailer. Consequently, the refrigerator does not connect here. Although I do not understand the problem if it can be put in the trunk of the car.
We also made 2 sockets 220V in the residential area, the inverter at 400W, enough for charging and on the TV. Lighting everywhere LED.

Water is supplied from the canister with the pump for fountains, not very powerful, but economical.
They made a niche under the tabletop under the kitchen, it seemed very convenient, but in fact, on top and bottom, the edges were from the profile of 15 x 15, a very flexible and not reliable profile. As a result, Niche rushed a little and the table from the chipboard did not get there, had to do from plywood.
The trailer after the assembly was tested by Karcher on all the joints, slits, etc. Tightness of 100%.

The cost of building cottages.

We started building a camper in May 2015, and finished in June 2016. We work with a friend on shifts, i.e. A week 2-3-4 days could devote a trailer. Very hung with a kitchen finish and doors. If you count on 3 months to assemble - plus triple time.

According to finance: everything is bought all new, nothing used. The trailer himself cost 44 thousand, and about 110 thousand went to the materials. Fixed everything, up to the gloves, on this price is close to real. You can make cheaper, but to know in advance.

By weight: Trailer + module weighs about 600kg, the module itself is about 460-480 kg. Gravity added a large number of chipboard, who will make a lighter material for partitions.

Machine 1.4 Octavia drags a trailer with a bang. Along the highway accelerates to 130 km / h, the trailer does not feel at all, the streamlined form practically does not slow down. Consumption per 1-2 liters increases. By a bad road, more than 90 are difficult to go, after all, the weight is not small, pulls the car. But 80-90 is quite acceptable for such a trailer. I traveled around the fields, on the ground roads, the trailer never chirped anywhere.

Video, where it is described in detail about a homemade house on wheels.