If you have long wondering how to decorate your apartment or house without significant costs means and time we offer transform light sources, namely make a lamp For Torchara do it yourself. You probably know that beautiful and unusual in the store is very expensive, but it is not necessary to spend a lot of money to make something stunning. We will use the most common materials that will definitely have in the farm. Any shade begins with a frame, if you have ready - you will only have to decorate it, if not, do not be discouraged, we will easily make the basis on your own.

1. Made the framework

Any of the elements that we will continue to use as a decor need to be attached to something. In order to quickly cope with this task we will need: Thick wire, round bugs, cardboard. Any framework consists Minimum of two rings interconnected by spacers. Decide on the desired form and the size of the future lampshade.

Consider the simplest view of the frame - cone. The bottom ring will have a diameter of 30 cm, and the upper - 20 cm. To discover wire lengthIt is necessary to cut off, you need to multiply the desired diameter to the number "PI" (3.14), that is, 30 * 3,14 \u003d 94.2 cm. The wires of the wire must be connected and bend with the help of round-rolls. The height of the strut will determine the height of the lampsion itself. For the reliability of the design, we recommend to make at least 4 transverse fasteners that will be attached to the rings at an equal distance. This should look like this:

If you are preparing a frame for a future fabric ceiling, then you need to wrap it with a dense cardboard so that the fabric is to secure. To do this pattern. Wrap the frame of the newspaper, tick the line in which the newspaper will make a complete turn, and leave the reserve centimeter for gluing, and the line of top and bottom. Cut is superfluous and transfer the resulting sketch to the cardboard. You can fix it on the frame using a thermopystole with glue, do not forget to wash the junction well, excess glue remove the tissue with a piece of fabric. Your frame is ready, you can start decoration.

2. Paper or cardboard lampshade

Paper is the most plain and cheap material which is easy to transformation, has many color solutions and different density. The frame wrapped with cardboard can already be used as a lampshar if you decorate it a little. It may not be solid, but have holes in butterfly shape Colors, circles, hearts, diamonds and other figures, which can then be suspended to the edge of the ceiling with a thin fishing line. Using a different color cardboard, you can create smooth transitions or a contrasting composition. Such a lamp will look great, because when it will emit light, on the walls and ceiling, small shadows will appear in the form of cut figures.
You can decorate a carton frame corrugated paper or molds for baking cupcakes. One mold open the sewn, drip into the center a bit and place in the second, more closed form. You can connect three or more form in this way. You will have air sockets that need to be placed as closer to each other. As a result, you will come out very tender and lightweight plafof From which the soft, muted light will come. Figures of paper, glued to thin ribbons and mounted on wire rings, fit the material. For a more aesthetic look, use paper of different colors, which will form a smooth transition from darker shades from below, to brighter from above. Remember that the paper is not a solid material, but it is easy to replace it if the appearance of the lamp will be bored and come up with something new.

3. Fabric lampshane

Depends on the desired light flux. Thicker and dark fabric will give muffled, soft light. Evaliable and selected material color. Green and blue shades will create cold lighting, and red, yellow, orange - warm. When the cloth is selected, it is necessary make a pattern. You can use the same cut of the newspaper as in paragraph 1. To make a fabric cover, it looks more neat, cut it on the machine, then turn it out and put on the frame. You can simply neatly sunmate the edges of the pattern, rebuild it and glue it with glue. In both cases, do not forget to leave reserve on the seams.
The case does not have to be from a solid piece, it can be multicolored flaps or a combination of monochrome tissue with color. Optionally you can draw or easy On fabric beautiful patterns or big flowers. The lampshade embroidered with her own hands will accurately surprise your guests. On the edge, you can stick a beautiful fringe with beads or wrap a ribbon and tie a small bow. Thus, you can hide small disadvantages. In order for such a subject more harmoniously in the room, agree on its color with other objects. For example, with or pillows on the sofa.

4. Threads, yarn, twine

These materials will use us for making shada Share.Make such shade for your own hands It can even be the one who is confident that the needlework and crafts is not at all his element. As basics We will use a balloon or an old rubber ball. We will also need PVA glue, deep bowl and wide brush. The essence of the method It is to wink the threads on the inflated ball. Color, thickness and amount of used threads are purely individually. If you want to get a more flattened and tight ceiling, which will skip little light, use the twine and wind up until they block almost the entire surface of the ball.

Before starting to wind, lubricate the surface of the ball with fatty cream or butter. You thank yourself for this when you remove it from the dried lampshar. The selected threads are pre-supervised in the glue by adding some water to it. Let them lie down and eat this solution. It is necessary necessary to make the layers of wound threads not only lay down to the ball, but also held together. Inflate the desired size ball draw On him a marker border up and down. Upper border will serve place for cartridge from . In these places there should be no thread. Start wrapping from the upper border. First, carefully lay out the thread several turns at the level level. You have to get out a small circle, then launch the thread to the bottom border and do the same. If you do not want, you can do without the bottom hole. Now, when you see your limits, you can wind in different directions, creating as many intersections as possible and pulling the thread slightly.
Each layer lubricate glue With the help of a brush. When you achieve the desired density, cut off the thread and hide its edge under the mug of the upper bound. Leave your creation in a warm place until complete drying. Only in no case put about it. The stream of hot air will force the ball faster than dried all the layers, and you get a plane of anything, but definitely not a round form. After drying, pinches the ball. By the way, using threads of several colors can be achieved very interesting combinations. BUT composition Of several such lampsions of different size, it will look very harmonious.

5. Tape, ribbons, lace

This is very romantic And a gentle look of a ceiling, which will be perfectly looked in the room of a young girl. In order to do it, there will be a wire frame. Cover it with a cloth, on top of which glue a beautiful lace, or place the lace ribbons right on the wire rings. the cloth need to choose either contrasting either in the lace tone. So it will look more effectively. Lace can be located not throughout the perimeter, but only on the edge, so it will be even more interesting. Fatin and all sorts of ruins and bows are suitable as an additional decoration.
The most interesting thing in such lampshairs is openwork shadows which they will discard. Can be used as the main material multicolored ribbons or beautiful braid. To do this, the edge of the first ribbon fasten on the bottom ring and stretch to the top, make one turn around it and follow the back to the bottom ring. Continue movement in such a way until you fill in all free space. To avoid lumen, rant the Neck-presence tape at least 1/3 of its width. The edge of the last ribbon is neatly glue to the inside, and to hide disadvantages, make the turnover over the upper and lower edge of the ceiling with a wider ribbon. Such a bright plander will resemble a rainbow, and glow various colors.
If you have knitted lace napkins And you do not know where to go to them, you can enter them the same way as in 4 points. Soak in glue, arrange on the ball and give dry. They will acquire the form of the sphere and will look very different.

6. Plafof from beads and artificial colors

Very beautiful creation that requires pain stiffness I. perpetuity. You will need a lot of colors, beads or large beads, a fishing line, a needle with thread and glue. It is convenient to place flowers on a frame with cardboard. It used to be very fashionable to decorate the walls with bouquets of artificial flowers, so they probably dust with you somewhere in boxes. And in just a few hours, or even before, you will look at them quite differently. Separate boutons And some petals from stems. You can even shoot plastic holders, but then you need to grab the petals by threads so that they do not disintegrate. So the details will most closely lay down to the cardboard and easily stick. Place flowers and petals on the frame, filling all the space. Well if there is several varieties flowers. You can make a beautiful floral composition on a lampshar of monochrome fabric.
Imagine that you make a bouquet, and you yourself will understand how best to act. On the edge of the lamp, you can add a fringe of several beads on the fishing line, or glue them in different places on the petals. You can glue several butterflies or dragonfly, in general, all that consider it necessary. A large beads strung on the Kapron thread can be used as the main material. As in the example with ribbons, it is necessary to fill the entire perimeter of the frame, fixing the thread alternately on the upper and lower ring.

7. Knitted lampshane

Quite unusual And the most cozy view of our product. If you own the skills of the mating of various patterns yourself, then it is just wonderful. Remember that knitting take a lot of timeSo if you want to present such a thing as a gift, then start preparing in advance. There are many sets with the necessary number of threads and pattern schemes, simply select the appropriate size. If you did not have time to master this skill, do not be mistaken. You will come to the rescue old knitted sweaters And children's who are already small to your child. Depending on the size and shape of the lamp, you can even use the sleeves from sweaters.
Top and bottom will have to be seduced so that they do not bloom. Dress the selected part on the lampshade, you can tie from above and decorate with decorative elements, and you can just sew. If a wrap yarn in the color of the plastic and cord Power supply, which will be in sight, will be released pretty sweet and complete composition. Suitable as dense bits performed by knitting, and a more delicate version with the lumen. crochet. To secure this option, use glue. Apply it point to the surface of the wire rings and press. Do not neglect tissue or cardboard frames. With their help will be better transferred to the shape of the plafone. Complete the composition with small knitted pomp or linted thread large beads. Surely all your friends will be surprised, seeing such an element of the interior.

8. Plafof from old hangers

Polifunted Wooden hangers Or those that have long time to update, will have in every home. Finally, you can not just throw them out, but find more worthy use. By the way, it does not have to be hangers. Suitable and old broken lamellas. They are pretty thin and have an arcuate form. Before assembling such a lamp, you immediately think about it. If you are a supporter of everything natural, just walk the sandpaper on a wooden surface to remove minor defects, and then open. If desired, make the composition of multi-colored, use the paints in the form of a spray. Now it's time to think about how we have items on the frame. Most simple option looks like that:

Figure shows that there were removed Metal hooks And the hangers themselves are cut in pressure and just glued to the cartridge. It can be done so, but you can work a little bit and get a more interesting result. We will need . Remove hooks, paint hangers and drill hole In one edge. In the resulting hole, shove the wire by typing the required number of hangers. Now cover the edges of the wire, and in the space that is formed after the bonding, the grove is in advance the cartridge with the wire. Place the hangers evenly with the backs to each other and pull in the middle of the metal homutic. You will be surprised. Make a similar lampshade for chandeliers with your own hands is easy and not long.

9. Plastic bottles, spoons

There are exactly different colors in every home. So that no one even thought that in front of him the product from this material, we suggest work hard and remove Bottles on small details In the form of leaves, colors, butterflies or any other figures. We used the form of leaves. Draw a few templates Different quantity, circle their contours and start cut. When you finish cutting the required number of items, give them a natural look. With the help of stupid nose of small scissors, squeeze on each leaf of the vein. Consolidate On the framework of the part in two ways. Either glue to each wire element and adapt to the frame at different levels, or glue with glue to the cardboard frame. We advise you to prefer a longer, but also a more beautiful first way. So the plafof will come out more transit And all the details will be noticeable due to accommodation at different heights.
If for you it is too long and tedishly Just cut the tops of the bottles, leaving from above 10 cm, cut them on thin ribbons, bend out and fix with glue. Ready flowers Stick to the frame.
Bottle was not found, but there are a pair of sets plastic spoons After a picnic, they also have an application. Do it lamp pineapple. For the frame, we need a plastic 5-liter bottle. Carefully cut down the bottom and degrease the walls. Now prepare a spoon. You need to separate the handle, leaving about 1 cm. When you caulate all spoons, start gluing them from the bottom row. Each subsequent row should go to the peak of the previous one on the floor of the spoon. Try to go around the entire frame before the neck, so that neat edges come to work under the cartridge. Your lamp is ready!

10. Do not throw tetrapaks

Yes, you are not mistaken, we will create real miracles, practically from waste. We are not suitable for all types of packaging, but only those that have inside the mirror surface. This type of ceiling will perfectly complement the interior in which the focus on various geometric shapes or strict straightforward shapes dominate. Tetrapakov will need a lot for this idea, so you will have to save the source material for some time. The packaging should be carefully cutting, making one solid canvas. Now we cut it on the strips of 130 × 21 mm in size, we divide into six equal parts and we turn triangles from these tapes.
Now it is necessary to have the most difficult part - individual elements must be somehow connected to complex figures. Cut the ribbon to fasten the size of 75 × 19 mm, we fold them into four parts, we turn back and fasten with them two triangles. Next, by the same scheme, it is necessary to collect 108 hexagons and 12 pentagons. Do not be afraid when you miss your hand, everything will be turned out by itself. You can do and conventional glue, so it will go much easier and faster. When all the elements are ready, you can collect the sphere or a conventional cylindrical ceiling. In the latter case, pentagons will not be needed. Just glue all parts of each other. In the case of the sphere you will have to tinker. You can inflate the ball and use it as a support when gluing the elements, and after bursting it and remove it through the hole. Now you can be proud of the work done. Such a lampshade you will definitely not see in any store, and when you turn on the lamp, the game of the shadows will fade all your family.

11. Tubes from newspapers

Recently, very popular has become weaving Products from newspaper tubes. Skillful mistresses make themselves baskets for storing various items, sew on them covers, decorate, paint and even sell them online. We thought that in this way it was quite possible to make a beautiful lampshade for chandelier, which will be perfectly looked in or. We will not even need a framework, it will take a lot of newspapers.

If you use pages glossy magazines, then the tubes will come out much stronger. It is necessary to cut a large amount of paper stripes, then twist the tubes. It is much easier to do using knitting spin. Ends must be missed by PVA glue, and then let them dry well. Try to do so that length The tubes were at least 20 cm. We need about 100 pieces for the manufacture of medium-sized plaffones. Take three tubes and cross them between themselves, it turns out a six-pointed snowflake.
This is the beginning of our ceiling. To make it easier to work, put something heavy on top to the intersection so as not to disperse the workpiece. Put the next tube on top of one of the rays that look out from under the cargo. The lower element must be wrapped on top of the applied so that it goes to the next vine. Repeat this stage with all penetrating plates. You will perform a spiral weaving. When you completely go over two circles you need expand diameter. For this, apply two two-folded twitches instead of one pntach. Continue weaving until you reach the desired size. Extra tails cut off with scissors, grab the edges of the clothespins and process the entire surface with glue.
When the frame will dry with paint in the form of spray, give It is desired color And after drying, secure everything with varnish. From above, you will have a cross, which can be carefully cut off, thereby freeing the place for the cartridge. Instead of weaving, you can fix the tubes with glue, forming the sphere or another geometric shape.

12. New life of old cans

In order to make a stylish and unusual lampshade, which will perfectly complement the interior with its soft, cozy light, you can use ordinary cans different sizes. It is necessary to remove all the labels, remove the remnants of the glue from the surface, wash and dry well. Next we will be with the help of a small and hang holes on the walls. Draw The marker desired pattern, Pour into the jar of water and put in the freezer to complete freezing. This is done in order to at the time of the holes, bank did not deform. The second option to keep the form - firmly fill it with paper. It remains to neatly do the holes and dip the finished product in hot water to remove ice. You will have small cute plafones, of which it is recommended to create compositions. The surface can be left unchanged, and you can paint or wrap thin paper.

We are suitable for I. glass jars, Especially if they have a non-standard shape and color. However, the color you can give them any, it is very simple. Prepare the cartridges and light bulbs. To put them inwards neatly do in the hole covers using a knife for opening. In the future, you will have the need to replace the lamp, so give preference spinning banks. The hole should be equal to the diameter of the cartridge, no more. Grind part with a thread into the hole in the lid, and then tighten the light bulb. Now proceed to registration Plafons themselves. Wash thoroughly and dry banks. Now you can paint them, paint, bother with beads or flowers, wind with colored threads or lace, in general, everything you want. Secure the surface colored with small parts with a clear varnish and tighten the covers. Your plaffones are ready.

13. Marine lampshade

There are people who cannot live without the sea and every way try to display their love for him in the interior of their apartment. Someone brings the framework for the photo from the seashells, someone hangs the paintings with the sea coast, and someone cannot return from vacation without a package with shells, which is not able to find application. If you learned in this phrase yourself, we prepared a small master class for you specifically for you abajura from RakushkiAs well as beautiful naval pebbles and everything, by anything you could not pass. For this we need frame, Wrapped with dense cardboard, glue and your sea gifts. Think about O. color lampshar. If you want to leave natural shades, just open all the elements with a transparent varnish if you wish to add some different shades, then use it, and after varnish. You can paint and the finished ceiling, but the paint and varnish will fall in the joints between the parts and it will not be very careful. Now, with the help of a thermopystole, take the whole, or part of the surface of the frame of the rocker, growing leave as you can less lumen. Small pebbles can be glued together on top of the first layer, it will give the volume of the finished product. Such a cute subject of the interior with a very characteristic mood will always remind you of pleasant minutes spent on the sea coast.

14. Forest Honor

Very unusual I. spectacular plafondwhich will like to lovers of nature. Well will fit in B. interior in style eco. Its name speaks himself for itself, and you are not mistaken if I thought that we would use as a material what would bring from the forest. More precisely, we are interested wood twigs different thickness I. bizarre form. Too thin twigs are not suitable, they will break in the fastening process. Length Branches must correspond to the desired height of the lamp. Separate material S. reserve Because in the process of manufacture, you definitely fit all sticks. The most interesting thing is that this kind of lampshair boasts, it is shadows which will be reflected in the ceiling and walls. They will create the feeling that you are in the real forest.
The branches must be well wash under hot water and dry, posing on paper and ensuring oxygen access. Dry sticks need a little . You can cut off the knife extra, in your opinion, bones or thin parts. Open the paint in the form of a spray or just varnish all the elements from all sides. The crust of the branch, the more interesting the plafof will come. Frames We need the usual wireless wireless cardboard. We will adapt the items to it with a thin wire or glue the thermopystole, as you are more convenient. It does not fit the taper, but cylindrical shape Basis. Fill the gaps very carefully and leave as few free spaces as possible. You can play lumets with small pieces. After complete drying, an extraordinary lamp is ready to use. Create a similar lampshade for chandeliers with their own hands will be fun with children.

15. Space Plafond

Many in childhood were dreamed of becoming cosmonauts and ragged distant galaxies. If now your child sleeps and sees himself in this role, we suggest to make it a children's room to become his dreams. In the shops of the office sold planet layoutsthat we need. We will do multi-level plafones in the form of a space system. To do this, we need cartridges with lamps and several layouts of different planets. The layout must be neat split into two parts. Before this, draw a circle on top, the diameter of which coincides with the diameter of the cartridge. After you need to remove this site. In its place, place the cartridge with the lamp and glue the layout back. These actions must be done with all layouts. If you did not find the planet, you can do globes different sizes. You can use halves, which is much more convenient, because it will be easier for you to replace the light bulb. From halves to make a lamp to table lamps. You can use old maps of the worldWheeling the frame over white, dense cardboard. The spirit of travel will always be present in your home, and inspire you to new accomplishments.

Making anyone, from the above plafo species, remember that all materials are fire hazard. Moreover, when they are exposed to frequent heating from incandescent bulbs. So place all the details on distance minimum 15. cm From the center of the Plafon, that is, the minimum diameter of your product must be at least 30 cm. Following this simple rule, you will protect yourself and your home from unnecessary trouble.

With your favorite things it is very difficult to part, especially if they are still in full working condition, but they painted outwardly. Therefore, many are trying to return to such things to the former gloss and freshness with the help of repair, or even make them even more spectacular.

In the case of lamp lamp lamps, it is more than possible. Options for their update and even creating a great set from scratch. You can come up with or take advantage of the ideas of designers and just creative people who have already implemented them and shared the result.

How to make a frame for lampshar

The old desktop lamps, the frame usually does not undergo such irreversible changes and deformations so that it cannot be used to create a new lampshar. But a person may not arrange his shape or size, and then you have to do a new one. Question - how and from what?

The easiest way is made of aluminum or stable wire of such a section so that it keeps the form well. It is formed by the skeleton of the future lampshar.

Stages of work	Description
	Cut from cardboard templates for all lampshade diameters. It may be alone if the form is assumed to be cylindrical, two - if cone-shaped, three or more - if complicated. We cut off the pieces of wire and form the circumference of the pattern from it. Ends tightly twist, if necessary, using PASSATIA.
	We are determined with the height of lampshar and the number of vertical jumpers. Wire for them cutting centimeters by 8-10 longer than need.
	Bending perpendicularly extra wires of the wire and wind them around the upper and lower circle. All joints additionally fix and disguise the tape. It can wrap the entire framework.
	If the lamp does not stop for the cartridge, we refine the framework. For which we first make a wire ring with a diameter of slightly larger the diameter of the cartridge and connect it with the frame racks with horizontal jumpers.

Also, the frame can be collected using welding or soldering. When soldering, instead of rosin, it is better to use soldering acid.

Council. The basis for lampshar can be both ready-made things. For example, plastic or metal wire baskets for garbage, woven vases or plastic bottles. They only need to cut a hole for the cartridge.

Prices for various types of lamps

Production of lampshades with wire frame

So, there is a frame, you might think what to dress it. The first thing that comes to mind is a new textile clothing.

Labor lamps from fabric

For the manufacture of tissue lamps, it is not necessary to have a sewing machine and be able to sew. But it will have to make the pattern in any case. For which the newspaper sheet or Watman, scissors and tape are needed.

The newspaper is wrapped around the frame, fix the joints of scotch and cut off the excess on top and bottom. Then the paper cap is cut along and tolerate the pattern on the cloth, leaving the allowances for the podgib.

The edges of the workpiece are separated inside and stroke the iron. Its dimensions after this operation should remain a little more than the newspaper pattern.

Wrap a fabric around the frame and glue the joint or gently sew it with a needle with a thread. The edges on top and bottom wock inside and glued to the frame.

Possessing tailor skills, you can make a lamp shade of a more volumetric form. And wisely with the pattern do not have to. It is necessary to cut from the fabric rectangle in the height of the frame and the length of the largest circumference. This is usually the bottom circle of the frame. Of course, do not forget about the allowances for the seams.

We sew fabric with an inside with short sides to make a cylinder, the diameter of which exactly coincides with the diameter of the lower part of the frame. Then we clamp and we flash the lower edge and wear a tissue cylinder on the lampshade. The top part is collected by uniform folds, while temporarily fixing them with pins, we fell to the top circle of the frame and glue. It remains to be sewed to the bottom edge of a braid or lace strip and bandaging label tape.

Also in the upper part of the tissue cylinder can be inserted with a gum - the view from the lampshar will be completely different.

A lampshade from an old knitted skirt. Top inserted rubber band

In the end, on the old frame you can simply put on a children's skirt suitable length. It can be sewn from any fabric - Sitz, knitwear, jeans, organza, etc. The main thing is that she harmonized the color and style with the interior of the room.

Laptop label

Crocheted napkins and capes now seem completely unnecessary old-fashioned things. Well, or simply not applicable in the interior of the apartment in direct appointment. But it's a pity to throw the product bound by my mother or grandmother. But of them you can make lampshade by analogy with fabric. Only first all the napkins will have to sew in one canvas, in form and size suitable for tosing a frame.

Council. So that the metal frame is not to get into the eyes through the openwork cloth, paint it, wrap the ribbon of suitable color or take the paper / cardboard by creating a hard inner layer.

Table lamp with such a lampshade perfectly fit into the Maiden Bedroom in Provence style.

Compare these two photos.

It uses the same fabric, but different finish techniques. And the second lampshade looks good, richer. The secret is in the use of non-solid canvas, but strips, sliced \u200b\u200bfrom the tissue and creating the effect of folds.

Picture	Description
	It is necessary to prepare a frame, a thread with a needle, scissors and a durable fabric that does not run around the edges.
	The fabric should be cut into long strips of 3-4 cm wide. The case will go faster if it is easy to cut off the edge and break with a sharp movement.
	The resulting strips smoothed iron. If you wish, you can get the edges and to ride them inside, but it is not necessary. It is enough just to crop sticking threads.
	The first strip is fixed on the top of the frame with glue or threads.
	And begin to carefully wrap the frame in a circle, alternately wrapping the strip behind the lower and top ring. It needs to be stretched and layered with a small adhesive on the previous layer. Then, to the first strip, he is laid the following, trying to make the seam from the wrong side of the lampsher.
	Watching the entire frame, the tip of the tissue strip is beaten from the inside. This can be stopped - the lampshade looks very attractive. And you can make an edging contrast fabric.
	The strip of this tissue 12-15 cm width is sweeping on the one hand, the fold fight and glue two-way tape to it.
	The other side of the tape strip is glued to the edge of the lampshar and is converted inside. Scotch must be glued on both sides, so it is bent along the axis.
	In the same way, another edge is frozen, and the excess fabric is neatly clipped with scissors.

Instead of one fabric, you can use different, alternating strips in color and width. It is even more convenient to use ribbons - they do not need to be sewed.

Shades from tapes with bows

Alternatively, strips or tapes of different color are not stitched, but leave the ends freely hang down.

Ribbons and fabric strips - excellent material for weaving. Making the foundation according to the method described above, it can be overwhelmed with transverse or diagonal lines.

Plafones from braid, yarn, tweep look very original. If the frame has many intersecting edges, they can be wrapped in different directions.

If the smooth fabric lamp is available or made with your own hands, it suits in all respects, but he lacks a raisin, it can always be decorated. Beads, rhinestones, paper flowers and butterflies, fringe, etc. But there is a more original and spectacular way of decorating plafoons ... putting on a tree. It is best to take a finished polymer putty. It happens white and under the color of different wood species. White is perfectly touched in any shade.

The technology is extremely simple: a flexible stencil is glued to the lampshade, and then a uniform layer of putty is applied to it. After its drying, the stencils together with the scotch is neatly removed along with an excess putty.

Other types of aboars

If there is no desire to bother with wire, cloth and paper, you can use completely different materials and equipment manufacturing techniques. Here are some examples.

To make a mold in eco-style, we need wooden or plastic hoops for embroidery, quickly grasping glue and rails.

Rakes are written along the length equal to the height of the future lampshar. And glued to the chambers. All, Abazhur is ready. It can be turned into a full-fledged desktop lamp if several ridges make longer and use them as a support.

Any work with wood is always fascinating, because there is an opportunity not only to show your own fantasy, but also to make a thing that fully complies with your needs and tastes. Agree, it's nice when there is a thing in the house made by your own hands. Read on our website about how to make a casket of wood with your own hands.

Abuirs from disposable spoons

As a frame for such a lamp, the plastic capacity of 5 liters is most suitable. It is it used in the proposed master class for the manufacture of an original plastic in the form of pineapple. But you can take any other capacity suitable size.

Sleep the bottom of the bottle of bottom and neck, leaving such a hole in which the bulb is passed.

Cutting a cutlery in plastic spoons, leaving "tails" of 1.5-2 cm long. The convex side of the spoons stain in the yellow color of the paint without smell. Best acrylic.

We apply on the cuttings a droplet of hot glue and glue spoons with a painted side outside to the bottom slice of the bottle close to each other.

The second and subsequent rows of spoons are glued on the previous one with the displacement, in a checker order. There should be no clearance between them.

Thus, we accumulate all the container.

From thick paper or thin green cardboard, cut the circle with a hole in the center, which coincides with the hole in the top of the bottle.

The outer edge is cut by large cloths and bend slightly down. We glue it to the lamp to the lamp. With the same paper cut out long leaves and insert them with a beam into the top hole, after installing the cartridge in the lampshade.

Note. Abuirs from materials unstable to ignition or strong heating can only be used with LED or fluorescent lamps.

According to this technique, you can create lampshades in a completely different style. If "Pineapple" will excellently look in the children's room, then the lamp, the manufacture of which step by step is shown on the following photos, decorate the bedroom.

Abazhur "Pineapple" with rugs

Zhazhur "Tiffany" from plastic bottle

A large plastic bottle can become an excellent basis for making a lampshar, imitating Tiffany style - multicolored stained glass mosaic.

The bottle is cut off the bottom. The slice can be smooth or curly. Then the drawing is applied to it and the contours of the special contour paint of golden or silver color are reduced. And after its drying, the plastic is painted inside the contours in different colors.

Paper Plate Shade

If the old desktop lamp has a dense cylindrical lamp shade, it can be changed beyond recognition using disposable paper plates. Their number is easy to calculate, measuring the cylinder circumference: one plate is needed for each centimeter.

Manufacturing instructions are shown below.

Bend each plate in half, from the fold line, retreat on both sides by 5 mm and draw two parallel lines.

Attach to these lines a ruler and with a little effort to spend on them a stupid side of the knife or other pointed (but not sharp!).

Bend the plate on the focused lines and take it to the lamp to the lamp by the hot glue.

Prices for adhesive gun

Adhesive Pistol

It's close to it and at the same height, stick the second workpiece and all subsequent ones.

That's what should happen in the end.

This method is known if not everyone, it is very many. The instruction is attached.

Influence the balloon to the desired size and lubricate it with a vaseline so that the threads are impregnated with glue. You can also wind up its fine food film.

In the jar with PVA glue, we do a selection through a hole slightly above the bottom.

Bold threads in a needle and skip it through a jar, then we clean the needle.

Watching a thread with glue an air ball in an arbitrary order until we obtain the required winding density. The area around the ball's tail is better to leave free, so that the lamp can be put on the lamp.

We wait for a complete drying of the glue and pierce the ball. Before this, the lamp can be painted with aerosol paint from the canister.

Decorating the ball from the thread with paper, wire or tissue flowers, if there is such a desire, and put it on the lamp.

Video - how to make a beautiful lampshade do it yourself

Very unusual material for decorating a desk lamp - metal locks from tin beer and other canned cans.

For the first row, they are flexing in half and fix on the upper ring of the frame-of-label.

All other locks are cut in half a ring and begin the second row, clinging the lock with cut-off ears for two neighboring rings of the first row.

Having reached the lower ring, the locks bend the crochet again and cling to the frame.

These are so different, but very beautiful and original lampshades can be made from traditional and, it would seem not at all intended for this materials.

Video - lampshade in Origami technique

Decorating the lampshar will help create a unique atmosphere of comfort in the house. In addition, this will help to give old things a new life. No need to throw out obsolete lamps and lamps, but it is necessary to show a little fantasy to create a completely new designer thing. The lamp decor can be made from undergraduate means by creating a lamp that will harmoniously complement the interior of the room.

Materials for decoration

In order for the lamp, made by their own hands, it looked original for his decoration, you can use a wide variety of materials and devices. Basic materials for work:

• glue (PVA, silicate or adhesive gun);
• twine, wire, twine;
• beads, rhinestones, beads;
• scissors;
• pliers;
• tight cardboard, white paper sheets;
• lamb frame;
• patronics for light bulb and wires.

This is not a complete list of materials that are used to create a lampshar. In the work you can use any remedies and materials.

The simplest option for lampshar is the framework from the old lamp. You can use metal frames from old lamps, which are later decorated to choose a wizard. Also as the basis can be used glass jars, plastic containers. The framework of the product can be made from the vine or wooden panels.

The bracket for the bulbs and wires can be purchased on the market or use the remnants from the old lamp.

From Papier Masha

Interesting interior design solutions is the lampshade made from Paper Masha. For the decor you will need white paper, old newspapers (you can replace thin sheets of paper), PVA glue, balloon, water. Before starting work, the ball is inflated until the lamp will then be. The newspaper needs to be cut into long stripes that briefly leave in glue or hubble. The surface of the ball needs to wet water and lay out the first layer of the newspaper. One of the parts of the ball is not stuck, since it will continue to come from it.

Unusual solution: if the bottom of the ball does not bumble with the newspaper layer, the light will be directed towards the floor. You can also leave the free side of the ball, in which case the light will come to the side.

To create an unusual pape-mache lamp, you will need to apply 5-6 newspaper layers. Be sure to make sure that before applying the next layer, the previous one completely knew. After completing the calculation of the newspaper, the lampshade can be saved with white paper, apply liquid wallpaper. After the decor of the lamp, the ball must be burst, sack the lampshade paper from the inside. From above to make a hole for the cartridge.

From cardboard and paper

Another decor is a paper lamp. This requires a thin cardboard of white or other colors. The length of the cardboard sheet depends on the necessary diameter of the finished product. A selected outline (butterflies, hearts, asterisks, etc.) is applied to the cardboard. With the help of a stationery knife, the selected drawings are cut out of the web. The cardboard glues along the edges and is attached to the frame of the future lamp. On the edge of the lamp, you can attach a ribbon or fishing ribbon decorated with beads, on which the characters cut out from the cardboard. Such a product looks very original on the ceiling of a nursery or bedroom.

On the tape you can drive colored beads that will be alternate with paper figures.

After switching on the lamp with such a frame, fun figures will appear on the walls of the room.
Using the fabric for the decor of the lamp

Fabric lampshades are easy to manufacture and perfectly carry cleaning. As the simplest variant of the lamp, you can take a cut of a tissue that looks harmoniously with the interior of the room, and sew its edge. The top of the lace is inhabited and all - the lampshade is ready. This product is attached to the metal frame and is also easily removed.

A more complex version of the tissue lamp can be decorated with ruffles, ribbon. Quickly original lamps are pretty, laid by fabric ribbons or embroidered beads and wipers.

For the decor of the living room you can make a lamp shade, decorated with ribbons with fringe. Finished ribbons are sold in stores for sewing. For fastening the fringe to the frame, a gun with hot glue is used. The adhesive substance is applied with a thin layer on the frame of the lamp, to which the braid is fixed.

If there is a need to decorate the ready-made lampshade to give him conformity with the interior, you can cut various figures from the fabric, which, with a gun with glue, are attached to the lamp shade.

From undergraded items

In any house, you can find a lot of objects that can be used to decorate the lamp. And if you search in the garage, you can create a whole designer chandelier studio. The most important thing is to show fantasy and not standard approach the selection of materials for the decor.

For fire safety purposes, it is necessary to use objects that are resistant to high temperatures or screw low power light bulbs Before starting work, the subject surface must be cleaned from dust and dirt, degrease it.

Choosing the style of the lamp, it is worth considering the interior of the room, its purpose. For example, the lampshade of plastic spoons will be strange to look in the living room, which is framed in a cleaning glamor style. At the same time, the lampshade decorated with rhinestones and stones will be completely inappropriate in the kitchen or in the summer gazebo.

From plastic spanings

Such a lamp is ideal for decorating the kitchen. It is very easy to do, while the materials for the lamp are a penny. So, the following materials will be needed for work:

• Set of plastic tablespoons. A total of 50-100 pieces of instruments will be required, depending on the desired size of the lamp.
• Pistol glue.
• Set of acrylic paints and tassels.
• Barcas for lampshar. A finished metal frame from the old desktop lamp is suitable for work.
• Scissors.

First, from all spoons you need to cut off the holder. Each product must be left for a 0.5 cm boat for fastening. Next, the parts of the spoon are randomly attached to the frame. They can overlap on each other by imitating fish with scales or go aims, resembling rose petals. The legs from the spoon can also be used for decor. After coating the entire surface of the frame, the surface of the spoon is covered with acrylic paint - monochrome or multi-colored. Using such a decor technique, you can create a lamp in the form of pineapple, flower, goldfish and others. The lampshade of plastic spoons is suitable not only for the ceiling lamp, but also for decorating the bedside lamp in the nursery.

From plastic or glassware

The farm often accumulates bottles of water, which can be used for decor of lamps. Before starting work, the bottle must be carefully flushed and dry. Further actions - Freedom of the Master Fancy.

For example, having cutting the neck of the bottle, you can create an excellent bulb cartridge holder. Several such accessories that glued together form an unusual chandelier. Bottles can be used from multicolored plastic or coat them with transparent colored varnish. So, the room will sparkle multicolored rays of light.

To create a lamp, you can use glass jars from under the solvents. Hanging at different levels lamps from cans will become an interesting design solution in the design of the kitchen. Also, with the kitchen arrangement, a saucer, cups, fragments from broken dishes can be used for the decoration of the décor.

From the beep

Such lamps can often be found as flashlights on the streets or on terraces. Make such a lamp at home is very simple - a twine and glue use to create it.

Before starting work, as in the case of a lamp-mache lamb, you need to inflate the air balloon of the desired size. It is he who will serve as a form for the future product. The twine must be soak in the honesty and wind on the ball in an arbitrary order. The free edges of the twine are binding to, while the node must be positioned at the top of the ball, where the cartridge will be located. Saving the product will be about 2-3 days. Then the ball must be burst and you can attach a chamber and light bulb. The finished product can be decorated with large beads, drunks. To decorate the arbor, you can use several such lampshots of different sizes.

Thus, there are many options for creating an original amusing. In this paper, you can use not only a special inventory, but also the healthy items. The manufacture and decoration of the lampshar will allow not only to decorate the house, but also a great time.

Decorating lamps or the creation of lampsions - the occupation is not only interesting, but also useful. You can get the perfect item that fully corresponds to the interior of your home, and at the same time - to save. It is only necessary to buy the simplest lamp, and make it exclusive. After all, the foundation of the comfort and individual style of our house is things, with love chosen, or made with their own hands. Get a truly exclusive piece of decor to you will help you to make a good step-by-step instruction, step by step by following which you can independently receive at least a whole furniture wall or a kitchen set in a decoupage technique, even make the original case on the sofa or chair, or a few evenings, dress the lamp in a new square Shade of its own production.

A cozy house is not only correctly selected furniture, but correctly made lighting. Thanks to the beautiful lamp, the interior will become exclusive, and indoors will become warmer and more cozy.

If you have a desire to make a permutation in the room, then together with it you need to update the chandelier and landsher. You can just buy a new product, and you can change textiles on the lamp with your own hands.

A detailed master class on making lampshar will help create a unique, decorative subject of the interior. After reading all possible ways of manufacture, you can choose exactly the option that will be perfect for you.

Material for making lampshar

Having a ready-made frame, you can proceed to the choice of material for lampshar. It may be:

• the cloth;
• plastic;
• knitting;
• twine;
• beads;
• paper.

Suitable materials that are usually thrown out:

• cardboard containers for eggs;
• newspapers;
• gift wrapping;
• old spare parts for a bike or car, etc.

Choosing material for lampshar, need to remember his color. It must be perfectly approached by the style created. In addition, you need pay attention to the illumination of the room. If the room is poorly illuminated in the afternoon, and there is a twilight in it, then a lamp is suitable for it more than a transparent or light material. For a light room, you can choose a dense and dark material for the lamp - but it will depend on the overall decoration of the room.

As you know, red and yellow color are added to the room heat and light; Therefore, so that the room becomes warmer, you need to install a lamp with a yellow or red lamp. If the room is located on the south side, and the sun warms its walls all day, then the lamp lamp for the lamp installed in this room may be blue or green.

Gallery: Shade with your own hands (25 photos)

How to make a firecase for lampshair do it yourself

The frame is a steady base, mainly consisting of two circles. Circumference can be both different and the same diameter; They are interconnected by vertical partitions. The length of the partition is the height of the lamp.

To make cylindrical frameworkYou need to make two circles of the same diameter. If you need to make a classic frame for the lamp, then in it the lower circle should be of a larger diameter than the top.

Round shape You can get if the partitions are not straight, but slightly curved. Classic framework from this will only win.

Interesting will be the shape of the frame, if the base has a ring, and at the top - no. It turns out that concave partitions will be connected at the top at one point, and at the bottom - will be fixed at the same distance from each other.

For the manufacture of the frame is best suited wireSince she perfectly can keep shape, besides she is non-combustible. For work will suit copper, aluminum or steel Wire, the diameter of which is from 2 mm.

Types of lamps made by hand

I really want to update not only furniture, but also accessories after repair. These include lamps, chandeliers, flooring and table lamps. It is desirable that such a subject of the interior is an exclusive detail; It can be installed in the room on the coffee table or in the bedroom on the bedside table or in the dresser.

To get an exclusive chandelier model, you need to visit the exhibitions of manual crafts. If the model you like is worth a huge amount, you should not be upset. You just need to apply fantasy, "turn on" your hands and head - then the exclusive model can be made with your own hands. Since the chandelier, usually, has not one, but several identical plafones, then for their manufacture it will take more time than for one.

Modern lampshades can have the most different shape, adorn them to their taste. Preference is given to products decorated with colored beads.

If you want to update the lamp lamp lamp, then the ideal version will be cardboard. It should be durable, but thin, then the product will be completely unlike others. The work is performed in the following sequence:

1. From cardboard you need to cut 4 identical frames similar to those in which photos insert.
2. It is necessary to glue the flap of the fabric to each product.
3. In each product, on the side, you need to make holes at the same distance. To do this, the needle or awl. With the help of cords, the parts are stitched, and a flashlight is obtained.

This method of creating a new lampshair is considered the easiest way, besides, the product turns out very easy. Depending on the furnishings in the room, the color of the fabric is selected with cardboard. The decor of such a product can be any.

Nietary lampshane

The ball made of threads looks very effectively in the interior. To make it, you will need patience and preferabity, and besides them:

• threads or twine;
• ball inflatable round shape;
• pVA glue;
• scissors.

The desktop must be caulated with oil or unnecessary newspapers, and only after that proceed to work.

1. The ball needs to inflate and tie a thread.
2. Wind the ball chosen thread. You can try to make various patterns, and you can just wind the thread on the ball without changing the directions.
3. Winding must be necessarily a tight.
4. Having achieved the desired density, the thread can be trimmed.
5. Carefully impregnate the whole winding with glue. The better the thread will be impregnated with glue, the stronger the lampshade will turn out after drying.
6. When the glue is completely dry, the ball can be pierced with a needle and pull out. Where there was a ball's tail, you need to cut a hole for the cartridge.

If, for some reason, you did not like the color of the product obtained, it can be repainted in another using paint in the canopy.

The finished lampshade of the twine can be covered with varnish, decorate beaded or beads.

Paper lampshade

So that the paper is not able to warm up and light up when the light burns, the lamp shade should be quite large. Under such a lamp, it is better to buy an economical light bulb that is heard.

Many ideas for making a lampshar for lamping paper can be found on the Internet. Various colors are used, different figures are cut. As a result, it turns out a unique creation that can decorate any room.

Label from fabric do it yourself

For work it will be necessary:

• segment of new fabric;
• scissors;
• roulette or centimeter;
• threads and needle;
• pins;
• textile glue or stapler.

Next, you need to choose an object for restoration: it can be an old desk lamp or any other lamp that has already lived for a grandmother. Thought in detail its appearance, which must be approached by the already created interior of the room.

For example, you can make a new lamp lamp from fabric to cell. It sews on a sample frame. If the old lamp has a frame - then consider that half of the case has already been done. And if there is no frame of the lamp, then this is not a catastrophe - it can be done with his own hands, there is nothing complicated. The lamp shade from the cloth in the cage is ideal for the country style.

How to make lampshade for lamp? The master class in its manufacture can be found on the Internet.

To sew a lamp shade on a frame, having a cylinder form, you need to measure its circle and height. On the tissue make the pattern, according to the size obtained, then cut it as a template.

For a cone, you need to make a blank from Watman. Tracing what was cut out, all too much to cut. If something failed - you need to remake.

The lamp fabric is attached to the cone, while placing the pattern or ornament is necessary correctly. So that the surface is flat, the fabric needs to pull.

Label for lampshar can be cotton or linen.

Lamp lamps in a nursery

When the child is small, then the lamp in the nursery is very relevant. You can always buy such a product, but to make it, you need not only time, but also fantasy. The lamp is preferably to do with the child to develop his fantasy. Since the ceiling will stand in the children's room, then you need to fully trust the child's taste.

Naturally, at night the child wants to see his favorite cartoon heroes. It will be necessary to work hard, and with it cut them out of paper or buy ready-made translations. You need to use the idea with a cotton print.

For bedrooms

If the bedroom is purely female, then the ideal option for the lampshar will be a model, associated with thread. The proposed version is associated with white yaris threads, which knit napkins to decorate shelves or tables. You can choose a pattern for thin spokes, if it is so simpler.

For the classic frame, the napkin is started knit not from 3 air loops. The length of the chain should be a little more top rings of the frame. Next, the lampshade knits in a circle, according to the scheme, like a napkin. It is possible that the height of the product will be greater than the length of the napkin, then it will be necessary to associate more to several rows.

The finished product must be wrapped and be sure to starchSo that after drying it has a certain form.

White knitted lampshade can decorate with colored beads or colored ribbons - It all depends on your imagination.

In the creative experiment, the main thing is to correctly select the shade of small elements of the decor. When style, color scheme and form are correctly chosen, then even the simplest thing made by your own hands will look exquisite.

To lampshade, made with your own hands, it looks more accurate and more beautiful, you need to paint a new frame of thick wire, and then carefully wind cotton ribbon. Then the fabric of the stitched lampshair will not suffer.

Conclusion

Very easy to update the lamp, which, with time, lost its original appearance. After reading the relevant information and buying all the necessary materials, you can make a unique thing that will decorate the interior of your home.

Original lamps and lampshades do it yourself. Ideas, master classes

Lamps and lampshades do it yourself. Ideas, master classes

Hello everyone!

Creating or decoking lamps and lampshells The occupation is not only incredibly interesting, but also enough useful: it allows not only to create a unique subject, and in full compliance with the interior of your home, but also to save. It is enough to purchase the easiest lamp for little money and beat it to your taste. And there are options that and how to make a huge set, in a variety of techniques, using a wide variety of materials.

I picked up for us with you the idea of \u200b\u200bcreating and decorating lamps, I hope you can choose the appropriate option for yourself :) Pleasant viewing!

A lampshade decorated using decoupage technique, the base of the lamp is made of books

Decor of the metal frame of lampshar with feathers - very stylish :)

It is often enough to decorate the lampshades, fabric or paper flowers are used, the result is very romantic :)

Fabric flowers with candle processed

Cutting convolutions are used as colors

Flowers from twisted fabric

Ready Flowers used here

The flower is made of a stem strip of fabric, striking on one side and assembled in a bud

Spiral roses from newspapers

The bottom of the lamp is decorated with spiral paper roses

Decor of Ikeaevsky lampsome paper flowers

Lace and knitted napkins look very beautiful

The form attached with glue

The ball is inflated and the lace napkins are applied with the help of adhesive. After drying, the ball skeins, blown away and removed.

Very beautiful option: As the base of the lamp, the bird cage is used, the lamp shade is decorated in the decoupage technique with an outdated.

Even an umbrella can be used for chandelier :)

Even Loskutka trimming fabrics will go into business: wrapped, knotted. This option will be remarkably fit into the design of the country house or children's room.

Buttons-buttons

For the manufacture of lamps, various glass containers are used very often and successfully use banks, bottles. Just below, I led the master class on the manufacture of such a lamp.

A bottle as the base of the lamp - the bottom is also given a similar master class.

It is a bit more complicated here - the hole is drilled down on the back side of the bottle, through which the cord is started.

The lamp is made of figured metal sheet

Origami technology is successfully used to create lamps.

On the base of lampshar glued fabric strips

Lampshade from various retro leaves

Abazhur from the basket - why not? :)

The second life of metallic coland

Unnecessary fork-spoons created a very interesting version of the chandelier :)

Very cute solution: a metal mesh and beat the poultry is stretched on the frame. I think for the children's room.

And now bird subjects :)

Abjeur painting acrylic paints

Shallow veneer lamp

The base of the lamp is placed by marine shells

Knitted lampshades - look very comfortable :)

Decor of amusing memorable photos and slides

Flowers on this lamp - this is the bottom of plastic bottles :)

Lampshades are planted with paper circles

Vegetable lampshade :) I think, still a flower is frying there :)

Shashore from Shornov

Decoupage technique also applied here

Very interesting solution - wire as an art object :)

Lampshade decorated with cloth strips

Branch lamp

A lampshade is decorated with crumpled compressed coffee filters (forms for cupcakes)

Glass vase lamp

Base of lampshar - unnecessary toy soldiers, short and painted aerosol paint

Creative lap fetra

Shade from balls for ping pong :)

Flower decor

And many more, many different ideas ...

Master class on the manufacture of lamp from can & broit caps from Tom & Brit (BestOfinteriors.com)

We break through the nail hole to create a hole

Insert the patron

Stain in one color

Screw the light bulb and insert into the jar

Lamp is ready :)

Paper Lights from Varrell.com Resource

We will need an image of the castle

Cut out, cutting the winds, glue

Inside place a point lamp on batteries

Chandelier from a rope from Sarah M. Dorsey (sarahmdorseydesigns.blogspot.com)

We will need a rope, MOD Podge glue (can be replaced by diluted PVA), ball

In order to create a wavy shape, Sarah used wooden slats. We lay out the shape, we laughing glue for fixation.

After drying, we lay out on the ball and scrolling abundantly glue

After drying, remove the lampshade from the ball and stain in the white aerosol paint - the Sarah has four layers

Very beautiful lampshade of grandma squares from the author of the resource aboutgoodness.com

We are tightening with lampshane cloth

Strip tissue bend in half along and twist in roll

Run slightly

We apply glue on the fold and glue to the base

Master class to create a base for lampshar from Kiri (ilikethatlamp.com)

Necessary components

Bottle carefully mine, disinfect and dry

Covered aerosol paint

Mounting process

,

That's so a bottle of Jein has turned into a base for lampshar :)

As you can see, a sufficient thing is simple and very interesting. Give the will of your fantasy, create and let your home be beautiful and cozy!

Well, for those who still prefer to buy ready-made lighting devices, I recommend to look into a specialized Internet-shop Lampa.ua. - where in a huge assortment are high-quality and stylish desktop lights, chandeliers, sconces, accessories, etc. From the best manufacturers and at very flexible pleasant prices :) By the way, this online store according to Google statistics is the most popular among Ukrainian buyers :) Use with pleasure!

I wish everyone good luck and excellent mood !!