04/17/2019 2 1 894 views

How to create an organizer for underwear with your own hands? Step-by-step instructions will help make a small storage even from ordinary materials that are often at hand. It's great, because I never want to spend money on purchased containers.

After reading this text, you will learn how to make a container for storing linen from ordinary package of milk or wide tissue tapes.

Necessary materials

Step-by-step manual for the sewing of the organizer is quite simple, whatever material for creating a lounge container you have chosen. But for the successful creation of a organizer, you need to prepare some materials in advance. To begin with, we will define what you want to construct your organizer: from cardboard or fabric.

Cardboard is usually placed in a cabinet or chest box. Therefore, in addition to the future place to store the container, you need to take care of the timely purchase of a ruler, a simple pencil or marker, cardboard (you can immediately cut the form in accordance with the width and length of the box), the stationery knife or small scissors.

And to sew an organizer for linen with your own hands from the fabric will help a large piece of color fabric, which will fit into your interior or simply pleases the eye, scissors, strong threads, tailor pins and needles. You may also need tailor lined paper, as it is quite difficult to construct an organizer for linen without a scheme.

How to make an organizer for underwear from cardboard with your own hands?

Such an option will cost cheap, but for its manufacture you need a good eye. But you need to start to search for a cardboard sheet.

• First you need to measure the width, height and length of the laundry storage box. Next, you should calculate the number of necessary strips.

• In order not to spoil anything, you need to progress. And to help this can ordinary pattern on a lined or sewing paper.

• All strips must have a single width and height. Only in this case, you can easily plan the creation of an organizer for linen and (which is no less important) to successfully install it in the box.

• Next should be outlined the lines of the cut. On long strips it is necessary to make three cuts half the width of the strip, and there are enough for two ones. What is the main feature? The width should be equal to the thickness of the partition.

• Cuts must be made as accurate as possible. It is better to make an incisive smaller and increase it if necessary than spoiling the item. To strengthen the partitions, you can cover them with varnish or scotch.

• The last step is to combine parts and lay them directly into the dummy box for the storage of underwear.

Responsible to the metering of the box, in which the container for linen will be stored. Otherwise, there is a risk that the product simply does not fit into it. In every case, it is worth leaving two centimeters about the reserve.

Production of a manufacturer from cardboard may require some financial investments. To minimize the costs of the organizer, simple milk packages can be used as a material.

1. An alternative way to manufacture a storage for underwear from cardboard with your own hands can be considered the creation of an organiser from dairy or kefir packages. Free appear at home at least once every two days.
2. Of course, you need to handle boxes before laying underwear in them. To begin with, cut them out the top so that everyone fit into the box. Then, using soap, flush the inside of the packages.
3. Build packets with each other using a stapler or strong glue by the type "Moment". From above, to give aesthetic value, you can cover the product of aerosol color paint. It remains only to put it in the box.

How to sew a tissue organizer?

The advantage of producing an organiser from fabric is that this option will serve longer. In addition, the fabric will not deteriorate if you accidentally spend a little liquid cosmetics on it.

• If you are not delighted with the use of cardboard or want to create a homemade road organizer, the fabric should be a tape in 12 millimeters width, cardboard for the base.

• First of all, it is necessary to portray the drawing of the organiser for linen on paper, and then transfer it to cardboard. Consider the boxes of the box in which you plan to invest the resulting product.

• The standard is considered the following cutting: five stripes of 18, 36, 45, 54 and 27 centimeters, respectively (remember the allowances of two centimeters for firmware), twelve internal walls of nine centimeters and two pieces of eight, external parts of the walls of 4 bands 36 Santimeters with letters and bottom format 36 to 36 centimeters. Fabric will turn out if it is right to sew all the specified details.

• Fold the partitions twice and place the top edge. Then you should sew all strips according to the markup (in accordance with it, the first three rows include four small compartments, and the last is four large).

• It is necessary to sew partitions so that with top and bottom from the edge of the tissue bands remained a stock of 50 millimeters. This will then sew to the bottom bottom (you can sew it on zipper, to more easily fold the storage.
• Next, you need to strengthen the walls with cardboard (it is enough to insert it into two-dimensional walls) and handle edges with a ribbon. In this case, you can not worry about the strength of the organizer and install it in the chest.

Video: How to make an organizer for underwear with your own hands?

Quickly and just make an organizer from a cardboard box. Select the box of the desired size so that it enters the closet. You can use one or more shoe boxes. Puck the cloth to do this, use PVA glue. It will be very beautiful, if you get a box with napkins in the decoupage technique.

Measure the length and width of the box, for these sizes cut out of a thick cardboard strips with a height of 15-20 cm. Cover the details with the cloth. Make them markup on the sizes of cells. Install the longitudinal partitions by fixing them at the bottom of the box with glue. On the cross, make a slot mark on the markup, not reaching the top 1 cm and put on their main planks. Organizer is ready.

In the dresser you can make an organizer for linen even faster. Cut in the size of the drawer in which you intend to store underwear, partitions from cardboard, separating the place of storage on the cells. Cells can be any shape: square, rhombid, rectangular.

Other variants of the laundry based on the drawer are possible. Instead of partitions, you can put small boxes, gluing with each other. Multicolored plastic mugs can serve as the cells, jars connected to each other with glue.

Suspended organizer

It will help to free up the place in the cabinet the suspended organizer from the fabric. Make it also easily, like from the box. It will take a dense tissue and material for pockets. Clear the fabric of the right size from the thick tissue and our pockets on it. For overhead items you can use jeans pockets, multicolored flaps, transparent fabric. Pockets are rowed by rows, then finishing the ribbon end the product around the perimeter. Return the right of the organiser through the shredder hanger crossbar and burst. Such an organizer for underwear can hang on the door or outside on the end wall of the cabinet.

Many of us like that when the shelves of cabinets and dresser reigns the order and each thing is in its place. For those who want to save money on buying a finished product, we offer to make an organizer for linen quickly and just do it yourself.

Everyone knows that the more careful treat things, the longer they will serve. Clothing items lying in wardrobes of breast rags lose the appearance. Special organizers will help to get rid of Bardaka. With their help, things will be stored carefully, each in its place. An organizer for linen is a rectangular or square box with several compartments for objects. It is a rigid frame in its foundation. It is best to have it in the dresser. In this case, the box will be reliably protected from dust and sun rays. The material for it is best to choose a light, but not brand.

Shops are ready to offer drawers of all colors and modifications. We want to familiarize you with master classes that demonstrate that the manufacturer manufacturer is a very simple task.

Mastery Organizer for linen with your hands from the fabric quickly and easily

For those who can sew and want to clean up in a lounge closet, we have prepared a photo manual. It illustrates the manufacturer of the organiser from the fabric.

• dense colored fabric;
• thin fine contrast fabric;
• sintepon;
• wide tape for finishing edges;

1. Cut from dense tissue and syntheps two rectangles. In size, they must be slightly smaller than the size of the box so that the future box is not deformed.
2. Send longitudinal organizer partitions. For this you need to put long rectangles from contrasting matter on the synthetone base. The length is the same as the foundation, and the width is the double height of the drawer walls.
3. Sew rectangles in the middle, fold them so that the seam is inside. Thus, a double partition is created.

1. Discharge the workpiece based on how many cells are needed.
2. Shot large rectangles, retreating from the edge to one and a half centimeters.
3. Calculate the dimensions of small partitions. Width to consider taking into account points for the seams, and make a slightly less.
4. Sew partitions made of fabric folded in half. Remove the blanks on the front side.

1. Email each small partition on both sides. Work is best done on your hands.

1. Sew two halves edge blanks. Sat, hide the seam inside and flash.
2. Take the top of all partitions with braid.
3. Sew on the perimeter of the product the main rectangular walls, and to them the edges of the partitions manually.
4. Shot to a sinteponte cut at the beginning of the rectangle. You can arrange a bottom with any seam, but it is better to work Zigzag. In the process of using threads will not be knocked out.
5. Project edge and external corners with tape. Organizer for linen is ready.

Thanks to the Singrytepon, at the base of the frame, such a box can be erased several times a year.

We try to make a practical cartoon organizer

The next master class we offer those who do not know how or does not want to sew an organizer. Make it out of the boxes. At the end of the work, you will get a stylish laundry storage box.

• cardboard box;
• vinyl wallpaper or covers of glossy magazines;
• wallpaper glue;
• brush;
• stationery: Long line, pencil, scissors, stapler.

1. Remove the measurements from the drawer in which the future box will be located. Based on these sizes, you need to select a suitable box. It is desirable that the size of the boxes were one centimeter less than the size of the box, since after the salary the thickness of the organiser will increase.

1. Cut the top of the box on one centimeter below than the height of the box. Pruning to use as partitions. Carefully disassemble the box.
2. Cut the box with wallpaper, separately salary the bottom.

1. Determine what size cells will be. Based on this data, cut from cardboard partition along the length and width of the organizer.
2. Clear partitions with wallpapers, and then cut into special grooves in them. Thanks to the groove, they are easily inserted alone to another.
3. Finished design fasten with glue and stapler, let her dry.

Instead of wallpaper, you can use fabric. It is glued to the cardboard with the help of plow glue. Since it is impossible to erase such a box, it is better to choose dark shades of matter. To give the Organizer the completed view, decorate it with lace, beads or other decorative elements.

Educational video on the topic of the article

We have placed several video lessons. With their help, in just a few hours you will make a stylish organizer for your beloved linen.

Where do you store underwear and various little things (socks, handkerchiefs, etc.)? In polyethylene trees or in scattering stacks of linen on the shelf? We offer you a more modern way - to store accessories in convenient organizers. Such useful things can be bought as in the store, and do it yourself at home from the girlfriend.

Having made such an organizer once, I want to continue to store everything in such boxes. The case is not even in beauty, but in practicality and convenience.

So, for the manufacture of the organizer is needed the minimum:

How to make a beautiful organizer from the box with your own hands

After that, proceed to the manufacture of insides. To do this, we will need a cardboard, folding it twice, we get stripes need length, their width should not exceed the height of the box. If, on the contrary, the box is very deep, it needs to be cut, to the desired height.

With the length and number of strips are determined based on the width and length of the box. The cell size in the end should turn out about 5x5. For example, a picture is given.

Now these stripes need to be properly cut. Since their width is 11 cm. An incision and there and there should be 5.5 cm. Cuts are made every 5 cm, from the side where cardboard is glued, i.e. Not where a fold. Cut in this way:

Now we connect everything to each other, so that the design is.

Here on top is preheated by a satin ribbon, so that the box looks more beautiful. Design ready. Go to the design of the box itself.

Put the box with a cloth, and in this case the fabric is simply fixed with painting tape at the bottom of the box and the box below.

The places of gluing are closed with a white sheet of cardboard, or something else at its discretion.

Now the design is installed inside the box. In this case, cells are made at 5 cm. And two branches are more.

After installation, the box can be decorated with any ways, in this case, it is just a satin ribbon and openwork ribbon. We glue the ribbon to the glue moment, and the ribbon is attached to the stapler. The result is as follows:

To bring order in the dresser or the closet - you do not need to spend money, if you wish, you can make an organizer for linen with your own hands from the fact that we often just throw away. Now, when thinking people think about the ecology of the planet, we will make our contribution to the struggle for it. Of course, the easiest option is to make an organizer for storing from ordinary cardboard boxes.

We select suitable boxes, cut the side walls to the desired dimensions, you can enclose or secure them with tape and color or white paper. Complete them so that there is no free space between them. And now the organizer for underwear is ready for its own hands, you can fill in "repositories".

In the next workshop, we use the usual cardboard: white, gray - what you have in stock. The work is completely simple, here the main thing is to make the right calculation so that you get the same cells for linen and bras.

To work, you will need:

1. Box from the chest.
2. Line, pencil.
3. Cardboard width with a box.
4. Knife or scissors.

We measure the box in length, width and height. We count how much cardboard strips need. It depends on what size of the cell you want to do. All stripes must be the same width equal to the height of the box.

We plan on the cardboard the size of the strips, cut on the outlined lines.

We had 2 strips long and 3 short.

Cuts do carefully, it is better to make an incisive smaller, and in the process to increase the incision. To strengthen partitions, they can be covered with a scotch or varnish.

In this case, the partition will be early, there will be no chances. You can enclose septum with colored paper.

So we wear short on top of the long stripes.

So we made the organizer with your own hands.

From disposable cups made of plastic, you can also make an organizer for socks, kapron golf, whiskers, and so on. We offer you a step-by-step instruction for the manufacture of such an organizer. The only minus - there remains a lot of space between the glasses.

To work, you will need:

1. Disposable cups.
2. Ribbons.
3. Lighter.
4. Nail polish.
5. Scissors.
6. Santimeter, thread.
7. Scissors.

First we measure the box that we want to improve. We define how many glasses will fit in one row.

Scissors make small holes on both sides at the same distance from each other. In those glasses, which on the sides - a hole only one.

Take the ribbon through the first and second hole. Tie to the knot and on the bow. Make the same thing with the rest of the cups. We will have several rows.

Here are the resulting 3 rows with different ribbons.

Then cut slight pieces of tape and fix the glasses in the box. It is better to take bilateral scotch, and try working carefully.

It remains only to decorate the cups: for example, cover the top edges with nail polish. So plastic will stand out more on the background of the box. That's all, the master class is over.

Another option free organizer for men's linen or sock. We need the same packages from the milk or juice. I do not care if I say that we throw this packaging almost every 2-3 days as unnecessary.

It turns out that cardboard from such packages can be very useful. We will not only give order in the closet, but also use cardboard, we will give him a second life.

So, we collect the same packages from the milk or juice, cut off the bottom and top with scissors so that the packets come to us in the height of the box. Then good, with soap, wash the inner foil and wipe dry.

We insert into the box, the walls of the packages can be copped with a stapler or scotch. It turned out neatly. Now you will not need to look for the right thing, it will always be at hand.

Now the suspended organizer is very popular. For such products made by your own hands, there is always a suitable place on the wall or on the handle of the chest. They always have a place of Belish and different trifles.