The construction of a residential building on the site is not the completion of all work, over time, economic buildings appear around the main structure, in most cases they are erected with their own hands. A single polycarbonate canopy at the same time is a simple and multifunctional design that can be used as a gazebo, covered car parking, a place to store firewood and for different economic needs.

Polycarbonate coating allows you to get a design with a modern appearance with minor financial costs.

Polycarbonate features

Polycarbonate refers to the group of modern high-tech materials made on the basis of polymer plastic. This material has a cellular structure, skips light well, can be colorless, colored or patterned. Polycarbonate canopy is an excellent solution for an extension to home or separately standing.

The popularity of material is ensured by the following advantages:

• A light weight. The polycarbonate sheet weighs less than 7-8 times than the sheet of glass of the same size. This allows you to use it when the structures are erected for which a solid foundation is not required.
• Good flexibility. Bending the material is possible without prior processing and without the use of special devices, which makes it possible to create various arched structures, including a round carport of polycarbonate.
• Ability to skip light. About 90% of natural light passes through polycarbonate, while the material creates reliable protection against ultraviolet rays. Therefore, under such a canopy is always light and comfortable.
• High strength characteristics. The bearing capacity and impact resistance of the coating are at a high level, much exceeding similar properties of glass. The cellular structure of the polycarbonate coating allows you to withstand significant snow caps or hail shocks.

In addition, polycarbonate is characterized by excellent noise insulating properties and a long service life, about a quarter of a century.

A device of a single carport with your own hands

Single carport has a fairly simple design, which allows you to perform mounting work with your own hands. The main elements of the construction of this type are: Support poles, rafter farms, doom and directly polycarbonate. Building stores offer ready-made sets for assembly, but you can independently make a drawing.

However, when drawing up a single-sided carpore from polycarbonate, it is very important to take into account the following:

• The angle of inclination of the skate. This parameter is determined depending on the climatic conditions of the area. In the regions where a large amount of precipitation falls, the slope of the canopy should be 35-45 degrees. In this case, the risk of roof destruction from the snow mass becomes minimal. In the regions where busty winds prevail, it is better to build carports with a bias of 20-25 degrees. For the middle strip of Russia, the optimal option will be canopies with a slope of 30-35 degrees.
• Material for making crates. Elements of the rafter system of the canopy can be made of wood or profiled pipe. Wood before starting installation, it is recommended to protect with antiseptic solution and paint paint, as wood is easily exposed to moisture. As for the metal crate, then in this case the canopy will be easier and durable.
• Type of polycarbonate. Polycarbonate can have different colors and structure, in construction stores presented sheets in a large assortment. During the construction of arbors and canopies, polycarbonate sheets of green or blue colors are used, cold shades make it possible to feel the coolness and freshness.
• Arrangement of the South. Single design can be attached to the house, and may be separate. In this case, in the first case, it is possible to save some funds due to the absence of reference racks. In addition, the extension is obtained from the wind from the wind on one side.

The rafting carp farms with one slope are performed in the form of a triangle, the base of which corresponds to the width of the canopy, and the hypotenuse - the length of the skate. Prevent damage and deflection of polycarbonate helps the lamp, laid in a step of no more than 50 cm. In the same way, you can build a canopy for firewood that will not seem unnecessary near the house.

Step-by-step mounting

It is possible to solve the question of how to cover the polycarbonate with your own hands, it is possible for one day, and this can make it one person or with an assistant. The construction assembly is performed using a standard set of tools: a screwdriver, a welding machine, a Bulgarian or a hacksaw for metal.

The direct installation of a polycarbonate canopy is performed according to the following scheme:

• Prepare the site for construction, for this remove the garbage and large vegetation, align the surface with sand, soil or gravel.
• Make the markup of the future design, marking the positions of the location of the supports.
• Next, make holes for pillars, if the canopy will have minor sizes, then the poles must be at least four. For a large design, more columns will be required.
• The mixture of sand and gravel poured on the bottom of the prepared pits, put supports and poured concrete. To ensure the desired slope of the scope, the supports of one side must be lower.
• The tops of the poles are connected by the strapping from the profile pipe. The elements of the strapping are fixed with welding or special brackets.
• Slinged farms collect on Earth, and then raise them upstairs and weld to the elements of the strapping.
• At the rafalines fix the crate.
• Polycarbonate is cut into parts of a certain size, the holes for fastening elements drill with the drill, then fasten to the frame using thermoshab.
• In the locations of the joints install a special profile.

After welding of the seams on a sample carcass of a single carbonate of polycarbonate, it is cleaned and covered with a layer of primer. Metal elements paint special compositions. The edges of the polycarbonate are sick of reinforced tape.

What is the secret of the popularity of polycarbonate canopies? Why do this material choose more often than others? Is it really all possible in low cost, or are there any other features about which it is worth knowing? How not to be mistaken, choosing a canopy to the house for the first time? How can this design might look, and why is it generally needed? We have prepared all the necessary information about the canopies and visors from polycarbonate, and also chose 50 best photo examples!

Order canopy?

At prices there are promotional canopies - a canopy for a turnkey machine 3.6 x 6.3 \u003d 63.000 rub !!!
A canopy for 2 turnkey machines 5.7 x 6.3 \u003d 128.000 rub !!!

The required welding is performed in the production process using protective gas, which ensures high quality welded connections.

Also in the factory conditions, painting is performed. High-temperature drying of the colored layer provides high strength and quality of protective outdoor coating.

The strength of our designs is provided with correct load calculations (all calculations meet the current standard).

The terms of production and supply of ordered structures are stacked in 2 weeks. Installation of construction takes one or two days.

Why people choose polycarbonate

Let's deal with what is this material. Polycarbonate is a solid polymer plastic. It is widely used not only in construction, but also for the production of lenses, CDs, computer parts.

May be:

Cellular polycarbonate is a few thin plates interconnected by jumpers. In the transverse section, the sheet is divided by cells, and the air located in them provides good thermal insulation properties of the material.

The monolithic polycarbonate is a solid sheet of polymer without voids and cells. This is a universal building material that has excellent light light, and can replace ordinary glass.

Among the benefits of the material it is worth highlighting:

• Affordable price. Polycarbonate is cheaper than metal, glass and wood.

  

• Light weight that provides ease of installation. Cellular polycarbonate is 16 times easier glass.

  

• Fire safety. It does not ignite and does not contribute to the spread of fire.

  

• Resistance to temperature drops. Polycarbonate perfectly tolerate operation in the temperature range from -40 to +120 degrees Celsius.

  

• Reliability and durability. Properly made canopy from this material will serve you not one decade.

  

• Flexibility and plasticity. You can create structures of various design forms.

  

• Variety of colors. Polycarbonate is produced by all possible colors, which makes it possible to choose the material, perfectly inscribed in the style of the building.

  

• Easy of care. To clear the coating of the canopy from pollution, you will not need expensive detergents. It is perfectly washed with ordinary soapy water.

  

It is not surprising that with such a number of useful properties, polycarbonate is so popular as material for the construction of canopies. Let's figure it out with how can there be a canopy to home?

Visor over the entrance

The visor over the entrance is the protection of the porch from rain, snow and other adverse factors. It can be attached to the building on the suspension or installed on additional supports. The frame of the frame is a tree, steel or aluminum.

Very nice and interestingly look at the polycarbonate on a wrought carcass. Floral motifs, complex geometric forms of wrought elements give the appearance of the visor of luxury and chic. Such structures fit well into the style of ancient buildings and classic private houses.

A canopy over the inlet of polycarbonate not only perfectly performs its main function, but also serves as a harmonious supplement of the exterior, and in some case - a bright emphasis that can completely change the visual perception of the appearance of the house. Due to the variety of colors, the material can be perfectly pick up the color of the building.

Canopy for car

The advantages of building a canopy to the house for the car are obvious:

When designing such a design, the dimensions of your car are taken into account, and such a part of the building is chosen, to which it is convenient to drive up.

Cozy terrace

A common option for installing a carport of polycarbonate to the house is the creation of a terrace for summer holidays. It can be placed immediately before the main entrance or with the lateral part of the building. Tables and chairs are installed, high fire safety material makes it possible to put on such a terrace of the brazier.

And this is another example of how the variety of colors allows you to make an ideal design to your taste. Under the fully transparent roof is very pleasant during a warm summer rain. It is said that behind flowing water drops can be observed infinitely. Toned coating will protect against bright sunlight and ultraviolet. Interesting lighting effect create bright sheets of colored polycarbonate.

Tree - Environmentally friendly natural material that has a pleasant smell

Where to order a canopy?

There are people who do not trust the masters in anything, believing that it is easier to do and cheaper. But this option is good only for those who professionally engaged in construction, clearly knows all the technology of the process, and besides, it can buy materials from acquaintances cheaper than in a construction store or on the market. What are the rest risks:

That is why it is worth trusting professionals! The company canopy master is engaged in carports, visors, arbors and greenhouses for 12 years. In our arsenal - hundreds of successfully completed projects, the quality of which is confirmed by the life of their operation.

The best masters who not only know and love their work, but also belong to him with a maximum responsibility, will make you a canopy by individual order in just 2-4 weeks. You will be pleasantly surprised and daily help of competent, which will answer all your questions.

Do not waste time and forces in vain. By ordering the product today, you can enjoy a great holiday in the near future.

Message
Sent.

Polycarbonate canopy is an excellent solution for a private house. It provides comfort in any weather, even outside the cottage. Moreover, the extension well shows itself in a number of household situations who are familiar to every owner of the cottage.

For example, if you have a carport of polycarbonate at the cottage, then even with a torrential rain, you will feel warm and cozy while looking for keys. Moreover, such an element in the exterior of a private house allows you to make the design more memorable.

Types of canopies

Engineering science and architecture are constantly evolving. Now you can build the strongest design in a few hours. Despite this, general principles of the construction remained almost unchanged.

At the moment, you can select five types of canopies, which are most often used in private homes:

When creating a carport of polycarbonate in a private house, you need to decide on priorities. If you wish to get an exotic appearance, which will immediately rush into the eyes, then the last two options are perfect.

Tip! If you have functionality and speed in your first place, the first and second options will fit the best.

What cannons from polycarbonate can be made in a private house

Private houses provide a lot of space for fantasy. Moreover, polycarbonate is a flexible material that allows you to create almost any design. In this regard, there are five options for its application:

It is these four vestments that are most in demand when it comes to an extension to a private house.

Features of modern canopies

What is a canopy

There are many structures of polycarbonate canopies for a private house, each of which has certain advantages and disadvantages. The choice primarily depends on the specifics of the building and the host preferences. But despite this, the basis of the structure always consists of such elements:

1. Supports. It is on them that the roof is attached. The height is set depending on the need. The material serves timber, steel pipes or brica.
2. The frame is made of wood or metal, steel or aluminum is used in the quality of the latter. It can be a prefab, welded or forged.
3. The roof is the main element of the building. It is he who protects the inner space from a variety of climatic influences. The coating can be both transparent, and matte. Material material is most often polycarbonate, but exceptions are also possible. For example, the use of plastic or rubberoid is allowed.

These are the main elements of a private house can be made with their own hands. They do not represent much difficulty. In addition, their cost is at an acceptable level. The main thing is to calculate everything and make a good project.

What functions performs a canopy

Start stands with a decorative function. Polycarbonate canopy serves as an excellent addition to the private house. With due fantasy, he can become a magnificent designer find, which will give the construction of an interesting and unusual appearance.

The space under a canopy of polycarbonate for a private house can be issued depending on your preferences and premises. As an example, you can consider the summer garage.

In order not to build a full-fledged extension or not to release a place inside the house, people choose a canopy of polycarbonate in a private house, as a temporary parking for the car. Moreover, if you close one wall, you can make a stand with tools.

In general, having aroused over all of the above, it can be concluded that the polycarbonate canopy for a private house performs the following functions:

• aesthetic
• protective
• restorative.

A large polycarbonate canopy makes it easy to relax in the fresh air, dinner or dining in a family circle

We make a canopy of polycarbonate for a private house

Select Material

Polycarbonate is different. The choice directly depends on the construction you want to build at a private house. Most often in rustic construction use a cellular variety.

Cellular polycarbonate for a private building consists of several plastic layers, which ensures its stability. Panels are connected by vertical ribbies. This material has an attractive appearance. In addition, it is easily mounted.

Attention ! The special structure of polycarbonate perfectly protects against harmful ultraviolet rays. Therefore, it is extremely often used in private construction.

There are a number of parameters that will help choose polycarbonate, which is ideal for private construction:

• if the thickness of the panel is more than 4 mm, then it is the perfect version for the greenhouse;
• 6-8 mm - designed for canopies;
• 10 mm - used to build vertical barriers, have high noise insulation;
• 16 - have great strength needed for roofs with a large area.

A wide color palette allows you to choose a polycarbonate that is ideal for creating a canopy in front of a private house. It can also be used to create a variety of other buildings.

Creating a canopy for a private house

It all starts with the design. After you decide on the installation site, you can start the development of the project. In it, you must draw up a drawing, prescribe the necessary materials and sweep the estimate.

After the design, the creation of a foundation under a canopy for a private house begins, the operation consists of such stages:

• Camerate the platform by pegs.
• Spend alignment.
• All over the perimeter of the foundation of a private house in a meter step in the meter, digs. The support racks will be installed in them.
• Install the supports and concrete them. Walk out a few days.
• Remove the soil inside the area by 15 cm.
• Each bottom with a pillow from the sand and sink it.
• Arrange the drainage system.
• Make a formwork for the foundation of the private house,
• Fill the concrete solution and put the grid, then apply another layer.
• Formwork is removed in three days. Sufficient strength design will gain after 3 weeks.
• Lay tile.

After the foundation is laid for a private house, you can start building a frame. Support racks are attached to mortgage parts. The upper strapping is done using electrical welding.

The transverse elements of the private house frame are attached to the beams with vertical struts. But this can only be done after the upper strapping is done by electrical welding.

Only now you can proceed to laying polycarbonate for a carport in a private house. If you are placing sheets with a thickness of up to 8 mm, the construction knife can easily cope with their cutting. For thicker plates it will be needed circular saw.

Attention ! The protective film is removed only after installation.

Polycarbonate sheets are fixed by self-draws. It will ensure the strength of the canopy for a private house. The distance between the self-drawing should be 30 cm. It is very important not to drag the thermoshaba. Otherwise, polycarbonate will crack.

RESULTS

There are many varieties of polycarbonate canopies that are used in extensions for a private house. Moreover, the species of the attachment are quite a lot. At the same time, each view has its purpose.

Polycarbonate canopies - street structures, universal for economic purposes. The material is lightweight, flexible, translucent in a large color scheme, a convenient format, are presented in different thicknesses, which allows you to descriptive canopies of simple and complex curvilinear form. Buildings look easily, elegant, do not overload the landscape, fit into any stylistic solution of the architectural ensemble on the site.

In the article we will give step-by-step instructions, how to make a canopy of polycarbonate with your own hands, how to choose the right form, calculate and design the design.

What you need to know about polycarbonate canopies - General criteria

The manufacture of carports from polycarbonate has become popular, due to the ease of installation, the practicality of the material, aesthetics of the buildings. There are:

• independent, detached - canopies over the pool, greenhouses, parking for the car, gazebos, cozpostroys of various purposes;
• attached to the building: bath, garage - verandas, terraces, visors over the porch and gate;
• mobile - easily move around the plot, usually over mangals and small arbors.

Sheds attached to the house from polycarbonate, photos of large curved attacks

These are facilities simple rectangular or complex, curvilinear form, sometimes two-storey, such as a garage or summer kitchen. Open and closed type, for this, the side walls are glass, isolated with panels, a beautiful grid, clapboard, a block key or close with dense curtains.

Indoor canopy from polycarbonate

Polycarbonate Polycarbonate Handed To House, Krivolynaya Roof Photos

Canopies are supporting vertical poles and a roof. The frame is made of wood, metal, less often from concrete, stone, brick.

Typical drawing of a detached carport of polycarbonate

Wooden canopies with polycarbonate roof

Making canopies and visors from polycarbonate on a wooden basis - the most budget and easy way to independently make a small architectural form on the site. Work does not require professional equipment, a sufficiently household hand tool. To build a wooden canopy from polycarbonate with their own hands, a laminated and profiled 100 * 100 or 150 * 150 mm, rounded logs ∅150-200 mm, tree trunks, the same material is made from the same material. For the rafter system of cozpostrokek, according to SNiP, a cutting board is required 40 * 100 mm.

Sketch of a wooden canopy from polycarbonate

The main disadvantages are flammable, poor moisture resistance as a result - rotting, fungal lesions, loss of strength, aesthetics. Rodents, minor bugs can cause substantial harm to carry elements. Wooden visors and polycarbonate canopies must be processed with fire-resistant compositions, an antiseptic, a solid finishing protective layer of oil or varnish.

Canopy from polycarbonate attached to the house, in the photo Building with broken roof

Metal canopies

Before making a polycarbonate canopy on a metal frame, you should choose the type of construction:

• Welded from a profiled or round tube are the most popular canopies from polycarbonate. For vertical racks, pipes ∅50-150 mm are used, depending on the size of the structure, for the strapping - a profile with an edge of 40-80 mm for the farm -25-50 mm.
• Forged - beautiful, elegant, but quite spent from a financial point of view. In the construction market you can buy stamped forged details, and create an independently exclusive product.
• Prefab Aluminum.

Canopy to a house from polycarbonate, on the photo suspended forged cantilever visor

For canopies from polycarbonate up to 5 m, a profile with a wall thickness of 2 mm is used, a cross section of 40 * 20 mm, for the buildings more than 5.5 m, it will take 3 * 40 * 40 or 2 * 30 * 60 mm.

An example, how to make a carport of polycarbonate with your own hands, arched design drawings

The iron canopy will serve not one dozen years, although his main enemy is corrosion. It is necessary to clean the details of the rigid brush from rust, scale, oil spots, walk by abrasive over the entire surface, then rinse with solvent. Next covered with soil, paint, better hammer paint, it copes well with chemical biological and mechanical loads.

Sketch of the suspension canopy of polycarbonate above the entrance

Brick, stone and concrete

Brick, concrete, stone canopies made of polycarbonate in the yard look impressively, but easily, not cumbered, thanks to the translucency of polycarbonate. Do not care during exploitation, fire resistant, well transfer harmful atmospheric influences, physicomechanical impacts, the truth suggests significant temporary and financial costs. If the canopies from other materials can be disassembled, transfer, then such structures are stationary, their dismantling is impossible.

Roof

Sheds from polycarbonate, photos of interesting ideas are presented in the gallery, also in the network of pictures and projects there are quite a lot, there are single and double, arched, cascading, less often there are cones, dome, wave-like.

Typical variants of polycarbonate canopies

Making the base does not represent difficulties, it is enough to take into account the wind, snow loads in the region, but the rafter system requires major calculations.

Farm classification:

• According to the characteristic outlines of the contour - polygonal, triangular, broken parallel belts.
• By the type of lattice - rhombic, triangular, semi-collar, diagonal.
• According to the method of support - console, beam, arched, beam-cantilever.

Cascading Polycarbonate Polycarbonate

The easiest option is a single carport of polycarbonate, the optimal angle of inclination of the roof is 22-30 o. The rafters are made of wood either this farm is a horizontal, an expedited or triangular frame with supporting disclosures, racks at an angle inside the main structure.

Schema for a single construction

To create a project you need:

• Scheme of a canopy with a roof type, the type of lower and upper belts depends on it.
• Polycarbonate canopy drawings should include the dimensions of the structure, since the load changes directly to the dimensions. It is important to determine the top, as well as the lower point of the skate, the less the slope, the more snow will be accumulated on the roof.
• Consider the size of the panels, the distance between the rafters depends on this so that the edge does not hit the void.
• Wind and snow load in the region can be found in special tables.

Double Polycarbonate Canopy - Project with Forged Elements

Farms are calculated according to the SNiP Regulations in Section 2.01.07-85, it is difficult for independent computing, engineering education is required, also special software. To avoid errors, it is recommended to use an online calculator or take a ready-made project. The loads and exposure are indicated in the standards standards in part 2.01.07-85, the rules for the manufacture of metal structures - P-23-81 SNiP.

Arched canopies from polycarbonate, in the photo Sketches for small buildings

To not be confused in difficult computing, use the recommendations:

• With a slope of 22-30 o in the structure of a width of 6-12 m, the height and length of the triangular farm should have a proportion of 1: 5;
• If the scat in 15-22 o, the dimensions in the proportion of 1: 5, but the discolitions must be low-consuming, there is a necessarily even number of belts, optimal - 8.
• A smaller bias is expedient for large industrial buildings, engineering calculations are needed here, the length and height of the run should be in proportion 1: 7, 1: 9.

Simple schemes, how to make rafters for canopy from polycarbonate

Calculation of a carp of polycarbonate from the profile pipe

We take a canopy, size 6000 * 4000 mm, this is an ergonomic solution: a comfortable gazebo or covered parking for a car.

Standard polycarbonate size width and length:

• cast 2,050 * 2, 3, 6.12 m;
• cell 2,100 * 3.6.12 m.

For private buildings, the thickness of the sheet is 5-12 mm.

Polycarbonate performance table

Farms must be placed under each edge and middle of the sheets, so the distance between them will be 1 m.

For the racks, take the pipe ∅80-100 mm, the step is 2.0 m along the long side of the canopy. For roof:

• the main elements are a profile pipe of 30 * 30 mm, the length of the lower - 3.1 m, remember the Pythagora theorem: the square of the hypotenuse is equal to the sum of the squares of the cathets, calculate the length of the upper, in our case - 3.9 m;
• slap slopes - profile pipe 20 * 20 mm, location - at an angle of 25 o.

Perpendicular jumpers will be installed every 0.5 m from each other.

Standard scheme of a small farm

Step-by-step instruction, how to build a canopy to the house from polycarbonate

To weld metal canopies for the cottage from polycarbonate, you must perform a number of conditions:

• Details, as well as bearing elements should not be with cracks.
• The roughness of the end of the supporting edge is determined by 2789-73 GOST - RA £ 12.5 μm.
• It is unacceptable to use for the lower belt of the farm steel with internal bundles and slag rude inclusions.
• At 14771-76, GOST compound is better to be welded with a mechanical type, in a carbon dioxide or its mixture with argon.
• According to 2246-70 and 26271-84 GOST it is recommended to use PP-An-8 welding wire.
• For fastening rafters, bolts of class 5.8 are used to fasten the rolling columns to be installed. 7798-70 GOST.

Drawing of asymmetric arched canopy

Practical construction

We place a place under the poles, dig a holes, a depth of 700 mm, we make a pillow 100 mm sandstone, 100 mm rubble, trambam. At the bottom pour 100-200 mm of concrete into it install a pillar, insert with effort, circular movements so that it goes deep into. We fill with concrete to the pit, check the vertical on the plumb, if necessary, correct, also strengthen the supporting hodges.

Way how to fix vertical supports

When the solution completely stood, the poles associate over the glovers, check the geometry, diagonally must be equal.

Farms are better to cook on Earth, according to the selected scheme, the most common are presented in the photo above. Ready details are raised, distributed evenly on the strapping, in our case, through each meter. The attachment nodes of the longitudinal planks and rafters are performed using steel slabs, as well as welding or bolted compound.

The next step is the lamp (perpendicular runs), from the pipe 20 * 40 mm, with a step of 400-600 mm to it and the sheets will be attached. Ready metal structures are cleaned, then color.

Ramans will strengthen the framework, this will allow you to fix the polycarbonate more secure

Look at video tips, how to properly attach a canopy from polycarbonate to the house, it will help to avoid global errors during construction with your own hands.

How to work with polycarbonate

Cut the polycarbonate is better than a circular saw equipped with a carbide disk with undiluted fine teeth. Making holes are a drill with a metal drill, between rigidity ribs. At the top ends of the cellular panels, set the planks and self-adhesive tape for sealing, the lower - it is impossible to close.

In total there are 2 ways:

• Thermosicles - holes are made by 2 mm more than the foot of the fastener, the item must enter tightly until it clicks. The length of the washer is equal to the thickness of the polycarbonate, it is necessarily equipped with a rubber band, which compacts the compound, which prevents ingestion of precipitation and dust. Such mount is called point, the washer tightly holds the polycarbonate and prevents its deformation when heated.

How to fix polycarbonate on a canopy using a thermoshaba

• Special profile - Planck with grooves on both sides, in which polycarbonate is inserted. The method is preferred if the sheets have to be allowed. The edges are screwed by thermoshairs. Profiles are provided for different compounds: angular, docking, in-block, wall, detachable and special for docking, if you need to change the roof configuration.

Photo instruction, how to fix polycarbonate to a metal carcass metal frame with a profile

There is also a wet method, the panels are attached to the smear, but if you make a canopy with your own hands, it is better to limit the 2 previous advice.

Types of polycarbonate attachment to the crate