Once we built for games facilities from chairs, pillows and blankets. So why not to help the younger generation today and do not build a real children's house with your own hands? You can use any technician materials - wood, PVC or aluminum pipes, phaneur, wooden pallets or dense cardboard.

Gaming house in the apartment

Even in the room of a small area, it is possible to install a small frame, covered with a cloth, in the form of a tent or wigwam. If square meters allow, build a full-fledged wooden or plywood house in the form of a fairy-tale hut, carriage, carriage, rocket or ships.

House-vigvam

As you know, Vigvam is a special design consisting of several long jeres, connected in the upper part and covered with a dense cloth. Such a structure can easily disassemble and remove storage, transfer from the room to the room, take it out on fresh air, to the courtyard or pack the car into the trunk and transport the garden.

Yes, and make such a game children's house Wigwam is quite simple.

You can use as a frame:

• carefully polished and varnished or oil-coated wooden rails with a length of 120 cm and 2-4 cm thick; To install in the fresh air, it is possible to use durable trees branches, but only in the event (!) If they have a cut even the smallest knots
• water PVC pipes
• light aluminum pipes, for example, remaining from old curtains

To cover the house, the tent is better to choose a dense flax or cotton, well-driving air. Under such awning, children will be comfortable and easy to breathe even on hot days.

Simplest Wigwam Construction - Three rhe, firmly connected in the top at a distance of 10-20 cm from the top. To fastening it is durable, combine them is still better than bolts, drilled in the upper part of the opening frame.

The design can be slightly complicated by making a rigid base from wooden plates or pipes to be installed on the floor. From the entrance to Vigvam, the crossbar does not need to do - the children will constantly stuff about it.

In principle, you can build a full-fledged tent and in the form of a quadrangle or tent, but with the fasteners of the frame you will have to tinker. We will tell about it just below.

Several small pillows stitched from colored fabric, mattress or soft fluffy carpet will decorate children's wigvam and make it more comfortable.

Tent or tent of PVC pipes

Plastic plumbing pipes The folk craftsmen have long been used not only for its intended purpose. After all, it turns out enough durable and comfortable garden chairs, tables and even greenhouses.

Decorate the windows of such an improvised stem curtains and laying mat. Outside, the dwelling can be caught with cloth, wallpaper remnants or colored napkins, paint paints, decorate the applique, bright inflatable balls, flags and garlands.

Let the child participate in the finish process, handing it a brush and paint.

Construction of plywood

For the manufacture of such a house will take no more couple days:

1 drawings for the manufacture of a children's house in the network a lot. You can use any of them. We describe only the principle of assembly.

2 floors in the house are warm, and the house can do without them. But it is still better to make a slight elevation using wooden bars-lag with a plywood screwed to it. Fastening the framework to this base will be more convenient, and the structure itself will be more stable.

3 Mount the frame from the rack-bars attached to the floor. It is better not to use nails - they can surprise. Mounting with screws will be much more reliable and more durable.

4 across racks are screwed horizontal jumpers.

5 Between them is attached to the lip of the roof.

6 For the bartal roof, it will be necessary to make the fronton - wooden slats shot down in the form of a triangle.

7 It remains to sew walls and roof plywood, coloring it with paint or caught with wallpaper.

8 The roof can be made of one-sided, suturing plywood the upper part of the structure under a slight inclination.

8 Door are made of wooden boards or make only the framework for it, and the doorbell itself is cut out of plywood. Plesh it using conventional metal loops, which can be purchased in the furniture store.

9 To paint or caught a cloth, wallpaper or bright appliqué, a house can be from the inside.

10 curvilinear figures from plywood at home are cut by a jigsaw. If you know how and love to work with a tree, make furniture for your child, which he can put in his new house.

11 Phaneur can even be bent, if you pre-dunk it in the bathroom. Thick sheets should lie in water a couple of hours. For thin plywood, there are enough 10-15-minute soaking. The softened item is placed on the surface and fastened with self-drawing, so that during drying it has acquired the desired shape.

12 Color the phaneer with ordinary oil or enameled paint. Do not forget to pre-project the surface. The paint in this case will fall more evenly, and it will go much less.

Children's house in the yard

For children living in the apartment, the cottage may seem boring place. So that the process of addiction passed as quickly as possible and inconspicuous, take care of creating a playground and a cozy house with your favorite toys.

4 floors will need to lift with wooden bars and sexual rails - long-term finding of children in the shade on crude ground is unacceptable.

5 In order for the tree quickly in disrepair, the structure is better to install on bricks or concrete blocks. They are bought into the ground in the corners of the base on the bayonet shovel.

6 To obtain a durable structure, polycarbonate thickness from 8 mm will be needed.

7 Cut off its sheets with a construction knife.

8 The protective film is removed at the end of construction. Otherwise, scratches may appear on the plastic.

9 of the polycarbonate can be made any arched structures - it is easily lightning, but only in length.

10 The strength of this plastic is ensured by the special structure of the sheets. They are made in the form of cells (rigidity). However, it also has its drawbacks - with improper mounting inside water can accumulate. So that the polycarbonate does not darken from moisture and did not lose attractiveness, the displacement of the sheets so that the ribs of stiffness are vertically. Sheet's ends to avoid moisture gets closed by a special end profile.

11 To avoid influence on the ultraviolet material, sheets are attached to the protective layer out. It is always applied inscriptions and pictograms.

12 If one sheet is not enough to close the wall, insert an additional support into the ground so that the sheets of sheets accounted for its center.

13 When temperature drops, the material is capable of changing the dimensions, so it is not necessary to place the sheets back to each other. It is necessary to leave a small technological gap. When installing, use thermoshairs that will help compensate for the expansion.

14 When drilling holes for fasteners, make them a couple of millimeters larger than the diameter of the screws. You should not twist them tightly, otherwise, with thermal expansion, plastic cracks.

15 For the manufacture of a duplex roof, you will need a skate element from the same plastic. You can buy it in a construction store. It is possible to protect the muffin from moisture and bent under the desired angle of the metal strip.

Wood structure

The height of such a structure depends on the growth of the child. But children grow quickly, so build better with a margin.

1 foundation Children's house from wood does not require. To protect the tree from moisture, you can install it on the basis of bricks. You can use low wooden or metal piles. To the porch of the house installed on such supports and raised above the ground, it will be possible to attach a hill.

2 The floor should be strong enough and good. Use better sex board or fane. They are fixed on bars-lags. The side facing the soil is impregnated with an antiseptic.

3 As a frame at the corners and in the location of the windows and the door, a thick ram with a thickness of 50x50 mm is mounted. To give the structure of stiffness at the top and bottoms are attached horizontal bars.

4 Angles are enhanced by spacer bruises - hide, racks - metal corners.

5 The roof is better to make a double so that the child does not have a temptation to climb there. Initially, the brucks are preparing fronons - end sides having a triangle shape. Between them there are horizontally walking bars to which the lining linked or fastened.

6 In order to avoid the head of the head, the tree is necessarily cleaned and squeezed.

7 To ensure ventilation, sufficient lighting and ease of observation of children, it makes several winds. They are placed in 50-60 cm from the floor.

8 The height of the door must be at least 20-30 cm above the child's growth.

9 Near the house you can equip a swing, slides, install a sports corner. For a girl, you can equip a small flowerbed with flowers, followed by which she can take care.

10 Wonderful if you organize a solemn opening of a house with tea drinking, festive posters and musical accompaniment.

Close up of light designs with heavy slate is unacceptable. After all, in case of collapse, the child may suffer. Use a smaller polycarbonate, wood or puff, covered with soft tiles for the roof of a children's house.

Tree house

1 How to make a children's house on a tree? Build such a structure is not so difficult, as it seems at first glance. Of course, designer designs to create only a person who can work with a tree. But here is the simplest construction consisting of support pillars and platforms, in the center of which a cutout for a tree trunk is made to even a novice joiner. Derevo, on which the structure will be located, should be quite powerful, but not old, with durable branches. All dry branches are necessarily removed.

2 The frame for a house on the tree is made of a well-polished and primed bar. So that the tree does not learn, it is necessarily dry well. The cross section of the bar is from 5 cm. It is better to use pine - it is less than rotting.

3 Compound support should be as strong as possible. It is not worth using the usual connection on self-drawing - it quickly looses.

4 In joinery for these purposes, a special type of compounds "hardwood" must be used. To do this, in wooden bars with a hacksaw and a chisel cut out deepening. Details are superimposed on each other and are additionally connected by bolts.

5 The wooden platform must be maximum sustainable. It is made of timber and leveled plywood.

6 The roof is closed with wooden slats, plywood or soft roof.

7 Make an appropriate staircase. To do this, you can kill several wooden bars to the inclined board. Live on such a staircase will be more convenient.

House from pallet

Wooden pallets (pallets) - excellent building material. Since durable boards in them are already shot down with each other, you can collect a game house quickly quickly. Although, if desired, pallets can be fully disassembled and used in construction only the boards.

1 Be sure to pay attention to the label. If IPPC letters are applied on the pallets, this means that they have been treated with chemicals. Use such products is extremely recommended. Do not build a children's house and stained pallets. After all, they often use formaldehyde compounds for their treatment. Better painting is already the finished product yourself.

2 Several pallets must be disassembled - their thick crossbars we will use to create a frame. To do this, we remove all nails with a nail. From lateral boards, you can simply sprinkle.

3 Each of the pallet is necessary to Occhat, otherwise the children quickly grab the zoom. To do this, you can use sandpaper with large grain. It is inserted into the holder for sandpaper (grater). You can use for stripping and grinding or grinder.

4 If the pallets are dirty, their pre-washed with a rigid brush.

5 At the beginning we collect the floor. For lag, we use the thick crosswise pallets broken. For flooring, you can take a chipboard or boards from disassembled pallets.

6 In order for the lodge from the pallets, with his own hands, heard as long as possible, to protect against moisture, we set it on a slight elevation of the bricks burned to the ground in the corners.

7 Getting to assembling a frame. Attach the vertical supports to the assembled base - cross-line pallets. We use metal corners and screws for this.

Domik-tent from IV branches

Children's chaolars better place near the house so that the games take place in front of adults. Put it near the hedge or in the shade of tall trees to protect the structure from drafts.

For construction, any types of branches of sufficient thickness are used:

1 First you need to decide on the shag shag. Long branches can be arranged in a circle in the form of Wigwam, covering them in the upper part and on the perimeter of a solid twine.

2 Classic binary branches from branches is as follows. At the chosen place in the ground, two durable thick rods are clogged, the end of which is twisted in the upper part in the form of horns.

4 In the rogatin rhogatin, the support pole is covered horizontally and bonded with a rope.

5 Wire for fastening is better not to use. It will take it quite a lot, and perfectly bend all her tips so that the child will not accidentally hurt, it is unlikely to succeed. It is better to take polypropylene twine or thick cotton twine.

6 Thinner rods are stacked at a reference at an angle of 45-60 degrees first with one, and then the other side of the chaolash. For strength, they are also bonded by the twine.

7 across horizontal rogatin can be tied up vertical, thus forming a lattice.

8 On top of the roof, the nepper is stacked (fir branches) or hay. So that the rain does not fall inside, the laying starts from below in such a way that the subsequent layer closes the previous one.

9 To protect against wind along the perimeter, the stones are placed, which fall asleep the earth.

The process of building a children's dream from A to Z

How to make a children's house with your own hands: from wood and other materials. Drawings with dimensions | (80 photos of ideas & video)

Good day to all! The daughter loves to play plot games, play situations from life, and here I wanted to her a puppet house, so that three-storey, in her height, with furniture, with the family of dolls began to search on the Internet suitable options, but there Takiiii Prices are now a house in 90cm with furniture - from 8t.r., and then 10-12t.r. Well, the limit of the prices is not of course ...

So I decided to make myself ideally wanted a durable, high, bright house with a roof of an attic. But my husband does not have a hand so that there is a version with cardboard boxes ... And so that he is not a flip and not missed - strengthen with several layers of corrugated cardboard.

The budget for the house (construction, "repair" in it, furniture, accessories) was 1000 rubles. As a result, met

The main spending were:

scrap paper in the role of "Wallpaper" - 250 rubles

glue (PVA, pencil, moment) - 350rub

film Self-adhesive "Under Tree" for floors and furniture - 150rub

the rest of the little things ... Fabrics found a lot of not necessary, thanks to the mother-in-law! Well, all sorts of boxes, jars, all that came across the arm).

Term - I did everything in 3 weeks.

This is what happened:

First floor - kitchen-living room in blue and pink color. Second floor - Children's orange, Violet bathroom, the third floor - the bedroom of the parents.

close views of each room:

And furnished:

Bedroom Parents in Mansard:

with them lives the junior kid-pups, in the corner of his cradle with a canopy. In the room: the bed of parents, a cabinet with a flooring, a chest of drawers with a bouquet of flowers, a carpet on the floor.

Second floor: children's two daughters + bathroom

Bathroom:

The bath is the only furniture that he did not do - this is from Fix Price Stand under the sponge. In Sanzle Sink, with a mirror, toilet, machine washing machine with a basket, laundry basket, and towels.

Children's:

Cabinet, bunk bed with staircase, rack with toys.

Kitchen-living room:

At the window dining area, on the right seating area.

Seating area:

The sofa and the chair of the boxes are placed in a denim pink cloth, inside a bit of cotton wool)) cushions made of knitted fabric, inside Sentipon.

Dining area:

In the pan's refrigerator (made the lid itself), the table set (kettle and plates and cups) with Fix Price - ceramic. Sink - from the molds foil from cupcakes. The facade of the headset - from wands of wooden, mounted wardrobe - the kitchenware is stored there)) the refrigerator is from the box.

As for the doll family, a separate story ... For Barbie, the height of the floor is small (30cm, Barbie is 30cm), and the type of fabric dolls on the wire leta van - they are small 13cm and 9cm. I found, I am dolls yourself suitable!

Dad and Mom - 20cm, kids - one doll 15cm, the second Eva 12cm, the Pups was in the covers))

Something like that))) Daughter, while I did a house, everything ran and asked - Mom, all ?? Are you soon ?? In short, playing mighty already)))

And I also came true dream of childhood so to speak

What furniture from what is done to write will not, in order not to do the post endless, but if something is interesting, I will answer in more detail in the comments.

P.S. The house with the prospect of an extension on the left of two floors (on each 1 room), it is necessary on the first floor of the hallway, because the clothes of dolls should hang somewhere, and on the second floor there will be another children's one, for a boy (brother and daughters). And on the third floor - an outdoor balcony with railing - a veranda for recreation of the family, but it's all later, when there is a place in the apartment, for the house poured clearly into the remaining simple

Thank you all for watching who mastered

The house I did for my daughter as a gift for the 6th birthday. My wife and my wife took part in the design, in painting all the same + my mom.

So, we will start as usual from the drawing, it is a damn and with approximate sizes.

Gradually collect for clarity and invent what it will look next.

The staircase was too long, jamb. But since I gathered her on the screws, 1 pcs on the step, so look next:

Since in the design, the main place is always ranked with a wife, then the "common" decision was made to make the drawers from the bottom. Float Facade:

And so they look after grinding. Lack of labor and plywood 4th varieties turns into a Fanor of 1go, though only in places)

We disassemble, grind, glue, we collect, collect.

I was convinced that the rear wall was needed. Well now I agree, she was exactly needed. In the pair of rooms were even pasted wallpaper.

Well, the final result. True, here the ladder in the attic is almost not visible, and the boxes I turn out to be placed correctly. But with the color of the screw staircase, the wife admitted that he was mistaken, it was unlikely to repaint, but it's hardly my daughter and I like everything, and I am extremely lazy type.

But the photo is in the morning when the gift was handed. Separate works were worth it to drag him in the evening before the day of birth to the balcony in such a way that the daughter did not notice. The house was quickly lifted, the boxes got up to their places and even a green staircase is no longer allocated.

Children's house in the country. It has its own sizes of 160x160x140 cm and the height of the skate 90 cm. For it, you will need:

• 4 foundation blocks;
• fasteners;
• 11 floor bars;
• floor boards 4 pcs.;
• lining;
• carved platbands;
• furniture shield;
• paint;
• ondulin;
• 5 brucks for the roof;
• edged board;
• holders of beam 6 pcs;
• nails, screws.

Step 1. Floor framework

First you need to mount the base and align diagonally, as well as increase metal corners.

Step 2. Selection of smooth meta

The desired place is marked with a frame of 4 angular points that will serve as a place for foundation blocks.

Step 3. Giving Sustainability Domik

The frame is placed on 4 foundation blocks that are installed in advance at a depth of 1 bayonet shovel in the level of the sand bed. It is necessary to pave a layer of waterproofing between the foundation and framework.

Step 4. Creating Paul

It is necessary using boards to sew a fully frame to get a smooth floor.

Step 5. Floor Processing

After the manufacture of the floor, it is necessary to process it from the inside adjacent to the soil. After that, you should proceed to the installation of walls, windows and doors.

Children's house do it yourself. Step by step photos

Important! So that children do not drive the rationaance and were not injured, you should choose fugged materials, as well as create chamded chamfer.

Step 6. Creating a rafter

Initially, the layout of the template rafter is made on the working surface, then the bait with temporary nails. Then the conflict is sewn, and all joints are strengthened with corners, and nails are removed.

Step 7. Fastening rafters

3 pieces of finished rafters need to be placed on the frame and rest in the inclined backup in order to set over the plumb. And then attach with the help of metal holders rafters to the wall frame.

Step 8. Sheathing

The finished frame must be wrapped in the carcass.

Step 9. Roof

The carved board is silent roofing on both sides ranging from the skate. The roof lies ondulin, which is very convenient to cut the grinder with a cutting disc.

Children's house from a tree with their own hands. Photo

In order for the house to look for elegant, ends and opening windows and doors can be decorated with carved platbands, and the corners of the house are smooth curly corners.

Step 11. Internal situation

It is necessary to reflect the house from the inside, setting there, for example, a table and benches for children. Children's house is ready, it remains only to paint it.

House on pillars for children

You can build a house for games at your own sector. It is not difficult to build a children's game house with your own hands. For example, you can build a children's house on the pillars with your own hands.

Guide to the construction of a children's gaming house with their own hands

Under such a structure makes no sense to arrange capital foundation. Instead, you can put a wooden timing with a cross section of 100x100 mm. Connect the elements between themselves with steel corners.

Next, you need to install supports for the upper floor of the structure. For these purposes, there will be a cross section of 80x30 mm. In order to connect them, you can take jumpers to which the second floor boards will be laid.

After that, wooden supports are mounted, which will be the basis for the stairs. Also should be laid wooden overlap.

Tip: In order for the overlapping of the second floor to withstand a large load, wooden boards need to install ribs down.

The support of the house is better installed on the paving slabs.

For safety on the stairs, it is necessary to install bales with railings.

Supports from above fasten with each other. To fix the wall frame, it is recommended to use jumpers.

house for children on pillars. Instruction step by step

To cover the roof, you can take a fane, and for walls - boards.

To cover the roof, any soft roofing material is suitable.

Also in the game house you can make a "black" output. For these purposes, the floor make a hole in which the rope must be thrown. Children will appreciate such an original way out of the children's house.

At the final stage, finishing works are produced. For these purposes, multicolored paints will be needed, all sorts of decorative elements, etc.

house for children with their own hands. Photo

Under the house you can build a sandbox.

House for children master class. Step-by-step instruction

Children's house is made of materials from such materials:

• blood board;
• bar 45 x45 cm for frame;
• metal fastening corners;
• "Block House" for cladding;
• edged board (inches);
• bitumen tile;
• Biotex;
• nails;
• wooden corners.

First of all is created drawing Children's house do it yourself. It will have a veranda and 1 room with windows and a door.

Start building a house is necessary with basiswhich will perform the floor function. The punch board is connected using nails and attaching a spike groove to three lags.

Then created Frame The future house of bars, which are fixed with metal corners.

Next stage - facing. To do this, "Block House" is chosen - a material resembling an externally wooden log house. In addition, he is quite hard.

Important! In order not to damage the spool when the Khaus block is connected, it is better to use trimming material and hammer.

Fining needed a house with the side windows and doors.

The external corners of the children's game house are covered with wooden corners.

Roof covered with edged boards, which are attached on each side with two nails. The flooring is made from bituminous tiles.

The finished children's house from the tree is processed with their own hands. " bioteks", Which will protect it from the sun and rain, and also give the desired color. For a house from a master class, a pine color is selected.

Inside the house, shops, table and shelves are constructed.

The idea of \u200b\u200bthe children's house is embodied with their own hands. It remains only to prevent such a gift to children.

Master class of a game orchard at the cottage

Children's house do it yourself. Photo

For a children's house from a tree, do you need:

• 6 wooden boards in size 1.8x2.4 m,
• bars with different sections;
• ruberoid;
• morilka;
• screws;
• thin boards.

Step 1.

If possible, it is necessary to lay foundation from rubble. Alternative option - to dissolve the surface of the soil. The bars with a cross section of 10 * 10 are cut into parts of the same length and are located so that the distance between the racks was about 1.4-1.5 meters.

Step 2.

The bars for support should be placed in the ground under the racks so that the floor does not rot in the future. The bars having a cross section of 5 * 10 cm are located between the racks of the panel that will serve as a floor. With the help of screws, it is necessary to make all the bars with each other. Free space between lags must be filled with soil.

Construction of a children's house do it yourself. Photo

Step 3.

Wood panels are cut and flattened exactly in a horizontal position. They need to be copped with each other with a bar.

Important! So that the flooring turned out to be uniform, you need to lay panels with a margin, but then superior to spill.

Step 4.

Next stage - side panels. It is necessary using a charge to make markup, while leaving the stock in the width of about 6 cm on each side. The height of the walls may be 1.5 m.

Immediately make slots for windows and doors also by preliminary markup. In this house, the door size is 1.2 * 0.6 m.

Between themselves you need to knock down the items, cover the verse and move to the next step - the assembly.

Step 5. Panels inside and outside open varnish. The flooring is securely fixed. After that, the walls on the screws are attached to it. From the side, the board is fixed with a cross section of 5 * 10 cm with a protrusion for the edge.

Step 6.The evenness of each wall after installation in a position is necessarily checked by the level, after which the rest are attached.

Step 7. Next you need to install the roof and cover it.ruberoid. Use a wide horse to close the spaces between the panels.

Step 8. So that the house looks more interesting, you can create a porch, and make shutters on the windows.

Step 9. Children's house at the dacha with their own hands, which will last for many years, ready.

Children's house over ground with a slide and staircase master class

The original idea of \u200b\u200bthe children's house do it yourself - on the elevation. To ensure it will be needed:

• chipboard plates;
• wooden bars under the pile;
• slide;
• stairs;
• nails and screws;
• cement and sand for the foundation;
• paint.

The collection of the house will be made according to the principleschip-grooveThat will give the opportunity to disassemble the structure if desired, for example, for the winter.

1. Collection of the frame is made as in the photo. If shutters are planned on the window opening, then you should purchase hinges in advance.

2. The workpiece for the hatch cover is made.

3. The railing for the porch is made. For this, the holes are drilled in the same distance, having a depth of half the thickness of the bar.

4. Finished rails need to be done in the drilled notches.

5. After mapping, the rails need to be removed and temporarily secure for the convenience of painting with nails.

6. Important Stage - Bookmark foundation. Under massive piles, 4 pits of 1 meter depth are escaping. Metal fasteners will be needed. Supports are flooded with cement and left until it is frozen.

Important! The deeper, put in the ground piles, the less likely the mobility of the house or its crash.

7. Frame It is built out of 4 major ribs and two side, which will be necessary to maintain the roof.

8. After the construction of the frame, the floor is trimmed by boards.

Children's house above the ground with their own hands. Photo

9. Following the floor, walls are trimmed.

10. Roof option - bridgewhich is covered with polycarbonate attached to rigidity ribs.

11. Window with sash and the door are attached on the spot.

12. Installed in advance fences.

13. The hatch lid is mounted using a chipboard sheet and door loops.

14. The finished slide is attached to the house.

15. Staircase You can make yourself or attach a ready-made, which will lead in the hatch.

Step-by-step instructions, how to make a children's house from a tree. Photo

16. The construction of the house is completed.

Dominics for children. Photo with description

1. A children's house on elevation with closing curtains looks original and functionally. It can accommodate and play in the fresh air, and you can hide the room from curious eyes. The massive tree, as the base of the house for children, will be reliable and will last long.

2. Natural decor elements can easily turn a children's house into a full housing. Glass windows and doors will give comfort and allow parents at any time to look at their child. Bright decorations will create a sense of the holiday. But the creation of such a house should be approached seriously and thoroughly.

3. Such a massive sustainable house will accurately delighted the child. It is equipped with all the fun, which can be invented for children. First of all, this is a spacious room, which, in addition to the usual exit, has another, equipped with a slide. To enter the house, a staircase was built, which is also very loved fidget. Well, for kids, there is a sandbox right under the house.

4. A cute pink lodge will immediately appreciate the girls. Sticky design, high-quality tree, pink paint - and a children's house ready. True, you have to work hard - insert windows, door, organize a veranda, chew flowers.

6. Blue-colored panel house in landscape design will look very bright. The original glass inserts add originality. Complete such a house spacious porch, unusual scenery and laid out of the tracks.