This article will be devoted to the fastening of plastic lining. Recently, many people are trying to fulfill such work with their own hands, but in the end they do not get the desired result, that is, the appearance will not already be the same, and the standard of strength is generally insignificant.

It is for this reason that in the article all the technology is described in such a way that it will rely on certain nuances.

In general, work on the decoration of walls with plastic lining, is carried out in two ways, this is:

1. On the crate;
2. On liquid nails.

True, it is worth noting that the last option is more complex and at the same time, it is not always able to provide a qualitative result. It is possible to explain this by the fact that before using such nails, it should always be thoroughly prepared a working surface. And most importantly, the walls have become perfectly even, since if this result does not work, it is better to forget about liquid nails.

Also in order to make the wall smooth, it is usually spent a huge amount of forces, time and materials, which means it is best to give preference to the mounting technologies of the lining and this is a little more detailed.

Installation of plastic lining on the crate

Before performing work with the application of this technology, it should be clarified that it has its own certain negative sides, this is a reduction in free space in the processed room. Of course, it is insignificant, but, nevertheless, still decreases.

Now you can discuss the latter itself under the lining. Often the lining produced from plastic material is attached to wooden crates, the main elements for which the rails are rated or small bars. The main thing is that the material used is completely dry. If you want durability for its similar frame structure, then it is applied to it from a protective antiseptic solution on top of it.

For the final consolidation, as a rule, choose one of the following types of fasteners:

1. Nails, small size;
2. Self-tapping screws with press washers;
3. Metal bracket, which is installed using a special stapler.

If you want to carry out installation work in a short time, you should use brackets for this.

True, experts are advised when installing rails, to drive two brackets at each of them at once and no less.

Many consider it the most important stage, because if you set the crate correctly, this will ensure the presence of a smooth surface in a vertical position. And only in it in the future it is possible to determine the quality of all the works carried out. For this reason, it follows each rail used only in the same plane and at the same time, all the time to check it with the rest. For example, if you install the lining in a vertical position, then the rails are in horizontal and so on.

Secure the rail on the wall with the help of a plastic dowel and self-press, so you need to take care of the presence of a perforator in advance.

Of course, many do not even know where to start this work, which means that this question needs to be discussed.

First, determine the curvature of the walls, that is, in which direction does it have a slope, and a plumb is useful for this. For example, if the wall has a slope at the top and outward, then install the rails in the first place near the floor.

If you start from the ceiling, then first come to one rail and already from it, using a plumb, make the necessary markup, according to which you can see the distance from the surface of the wall, where the lowest board will be placed. Next, to put pieces of wood material under it, as it will make it possible to make an element smooth in the plane with the first rack, but also in the horizontal.

Then between them stretch several rows of durable threads, which will help create a plane of the future wall. Now it will be only for the installation of intermediate bars, which are better than those of these threads.

When fastening the wallboard, a question appears that concerns how many intermediate bars may be needed. It is determined by the height of the wall, but if you work in a room with a standard high, not exceeding three meters, then you are enough of two pieces.

Installation of plastic clapboard

As a rule, at this stage, it is best to think about how to fix this type of lining. At first glance, it may seem that this is a fairly light process, but in fact, it is, it is simply noted in such a work.

In general, the installation instruction is one of the most simple. First you need to fill the profile on the crate, which is made of plastic and will be starting. In addition, it is referred to as special elements that can set a point for reference. To do this is the wisdom of everything in the corner of the room only in a vertical position, with a plumb.

Only due to the threads you can set a profile and consolidate it to the slats using brackets. Next, they set the first panel joining the brackets. It is important to note what to do is better taking into account the method of grooves.

Before the installation process, each board of the lining should be well inspected and verified for verticality, it will make it help level or plumb.

Each subsequent panel is inserted along the same scheme. And at the end often the question appears on how to fix plastic lining, that is, the last board. It is worth noting that it will not be able to fit completely so much, which means it must be processed. For this purpose, you can take advantage of a well-compatible building knife, a metal cutting tool or a jigsaw.

Next, in the corner on the crate using a plumb, a final profile is installed, which is the last in the installation work. You need to insert the last panel into the previous one, slightly exacerbate it, and insert the opposite end to this finish profile. It will not need to fix it. This comes on the installation of plastic lining.

Conclusion

Of course, there is nothing heavy here, especially if you follow all the requirements presented above. It is also important to note that the cost of such a material is acceptable for any category of citizens, so its popularity has such a high indicator.

The plastic lining on the ceiling is attached, as a rule, when finishing bathrooms, balconies and loggias, other usually non-residential premises, where it is necessary to create a practical, neat and not afraid of moisture surface. Less freight on the ceilings in the kitchen, giving preference outwardly a little more attractive plastic panels. In residential living rooms, bedrooms, etc. - Such a finish is considered to be simply inappropriate.

The ceiling trim of the veranda, gazebos, the porch with plastic lining is normal practice, and how can you finish such a finish and explain in our article.

Preparation of instruments and consumables

Tool for finishing the ceiling by plastic clapboard

The ceiling of plastic lining is made using the following set of tools:

• Electrolovka or hacksaw on woody Ideally, there should be one, and another tool, since it is easier to cut the plastic panels of the wall panels along the lighter with hacksaw, while the transverse cutting is easier to perform a jigsaw.
  Also, the jigscription will be required for cutting bars for the framework of the framework.

• Impact electric drill.
• Screwdriver or screwdriver.
• A hammer.
• Building stapler.
• Level.

Calculation of the amount of lining on the ceiling

Plastic lining is usually implemented as separate panels for 6m long, but if you know the size you need in advance, you can immediately cut the material on suitable segments.

The required amount of material is calculated, based on the area of \u200b\u200bthe ceiling. If, for example, surface sizes 3 * 4 m, and the width of one lining panel is 20 cm, it will be appropriate to cut the 6-meter panels in half and wash the ceiling in width.

Then the minimum number of panels needed to cover the ceiling will be 10 pcs (10 * 2 \u003d 20 segments; 20 * 0.2 m \u003d 4 m).

According to a similar algorithm, the number of lining for a specific area is calculated.

It is always necessary to provide for up to 20% of the material of the material in case of rejection, the presence of cropping, etc.

Calculation of the amount of wooden bar

Wooden timber required for the construction of a frame design (crates) is selected most often with a cross section 20 * 30 mm. Usually it is screwed to the overlap in the direction perpendicular to the planned. The step between the bars is set within 1 m.

If you go back again for example with a ceiling of 3 * 4 m, since the lining is planned to be placed parallel to the 3x-meter wall, therefore, the bars will need to be placed parallel to the 4x-meter.

On 3 M widths, 4 BROSS are required at a step between them in 1m. But since the 4-meter bar on sale is not found, you will have to purchase 8 pcs 2 m each.

Other materials

You will also need a number of additional auxiliary materials:

• Staples for construction stapler.

Instructions for cladding ceiling by plastic clapboard

Plastic lining on the ceiling is mounted as follows:

1. Remove from the ceiling an old fragile finish with that, if it is kept well, the removal can not be performed.
2. In the bars, the holes under the tape drive are drilled in a step of about 0.5 m. With elevated moisture in the separated room, the tree should be protected by oil, varnish or paint.
3. Fasten bars to the ceiling. To do this, apply them to the places of future dislocation and the holes made in the bar are projected onto the overlap with the help of a shock drill.
   The drill is selected in accordance with the diameter of the dowels. Having done the holes in the ceiling, fasten the bars to the ceiling, inserting a dowel into the holes and screwing the screws into them.

1. In the process of attachment, the BRUSEV controls them to be located in the same plane. If necessary, leverage any hard lining (for example, wooden wedges) of a suitable thickness.
   It is impossible to fill even one bar, otherwise the curvature of the entire web will subsequently be clearly noticeable.
2. At the end of the installation of the frame start to. The first thing on the perimeter of the ceiling is fixed by a plinth or L-profile to the bars.
3. Further in one wide end (with a spike) insert the wall panel into the plinth, the other end (with a groove) is attached to each bruus.

The fastening of the stapler is performed in the upper part of the groove.

1. Then insert the spike of the next panel into the groove first, and on the side of the grooves again produce fastening to the crate.
   Similarly is done.
2. The last panel may need to cut a bit in width, and then gently insert it into the plinth already on the other side of the ceiling.
3. Upon completion of the work, the ceiling surface is cooled well, using a slightly warm soap solution and a soft cloth (sponge).

Installation of plastic lining on the ceiling is quite simple, and it is usually not difficult to do everything with your own hands.

It is just an excellent option in terms of practicality and durability, so for not too twisted in the plan of attractiveness of the premises, the plastic lining is used.

Lining PVC. - This is a type of plastic panels having special grooves for hidden fastening. Usually, plastic lining , Unlike pVC panels When installing forms a roll connection. It is a modern practical and inexpensive finishing material. It is used for the design of walls, the ceiling both indoors and outside, as an economy option for the binder of the frontones and roofing carnese swells. Specialized and recommended materials for the binder of the eaves and the frontones are SFICS PVC and vinyl Siding.
The PVC lining is good when finishing rooms with high humidity: kitchens, bathrooms, etc.

Clapboard - It is unemployed and relative to the "clean" way of finishing the premises. One of the main advantages of this finishing material is high manufacturability of installation. The wall is going, like a children's constructor, and even unprofessional is cope with this task. Another advantage of this method of finishing is the practical absence of any dirt, dust, waste and other "side effects", inevitable during normal repairs. Often the lining is attached to a wooden crate set perpendicular to the direction of the lining. A hydraulic, heat, and sound insulation can be installed between the separated surface and the lining.

Assortment of finishing planks

F-shaped profile (3) Closes the shake of lining with door and window openings, angular connections with other materials (wood, concrete, etc.).

End Element (6) (It is: the starting, final, finishing element) closes the end face of the lining, can be used when closing the wall paneling to the door and window openings.

Connecting n-profile (1) It serves to connect the lining with each other (extension of the length of the lining).

Internal angle (4) Closes the connection of the lining in the inner corners.

Outer corner (5) (outer) closes the molding connection on the outer corners.

Plinth (2) (Upper, ceiling) Closes the adjoining of the ceiling lining to the walls.

Universal invoice decorated profile it is used for registration of internal, external corners and end faces of lining. The required form of profile is attached by its fold. The fold is made by a uniform moving movement of the fingers along the entire length. Cotton gloves are used to ensure better slip. For sticking, you can use any adhesives designed to work with PVC.

PREPARATORY WORK

In order to quickly and high-quality installation work, the required quantity should be calculated:
1. Lining, which will be done by finishing (in pieces).
2. Finishing planks (moldings) in the route meters.
3. Deeks for arranging clamps 30x10 mm or 40x20 mm.
4. Small nails or stitching clips (must be protected by anti-corrosion coating).
5. insulating plates from foam or loose wood fiber (if necessary).

To carry out installation work, you must have the following tools:
electric drill and drill with a carbide tip for a specific dubel diameter;
Manual electric saw with a volcanic disk;
Electric screwdriver or screwdriver;
Construction level for alignment of cable cutters both in vertical and horizontal planes;
plumb;
Corolnic;
hacksaw wood and metal;
Stuslo;
Scissors for metal;
shoe knife;
Furniture Stapler (in the case of using connecting brackets with a depth of 10 mm);
Hammer and Dobochnik;
pliers;
straight rail;
roulette;
chalk, pencil;
cord;
Staircase or stepladder.

With the help of roulette, chalk, level and direct rail, you should apply the circuit of the installation of the crates.

The procedure for performing work on Installation of pvc lining.

Depending on the application of the material, options for mounting clap on the crate of various types are possible:

· On the wooden rail (Dry rooms, with additional processing of timber - can be used in wet rooms; exterior decoration)

· On a plastic rail (wet rooms)

· On the metalofilm (Wet Rooms)

· Directly on the surface with adhesive compositions (with interior decoration)

Getting Started with Molding, a number of practical advice should be followed:
1. The PVC lining perfectly is perfect for a saw with a small gear blade (for example, with a metal hacksaw). Good results give a manual circular saw with a volcanic disk (from "Bulgarian").
2. The transverse cutting of the lining should be started from the thickened part.
3. Connecting nails should be strictly vertically (it is also necessary to use the furniture stapler).
4. When installing finishing slats (moldings), you can not forget about the cutting of the angles (using the stouch) during the arrangement of turns.
5. With a horizontal installation of PVC lining on the facade of the building, the edge with a groove should always be located down to avoid the rainwater.
6. And finally, before cutting off, you need to measure seven times.

The first thing is mounted a doomle for fastening the PVC lining on it. This is the most difficult and responsible stage of installation work. From the correctness and rectinity of the installation of the bearing designs depends on the premises.

Plastic lining at the request of the owner can be mounted vertically, horizontally or at a certain angle to the horizontal surface. If you mount the PVC lining at an angle to the floor - it is better to arrange the bars tightly to each other.

Vertical Location Loading Horizontal Location of Lining

Here it should be borne in view of the fact that in all cases, the slave rates are placed strictly perpendicular to the facing lining. The distance between the cable slats is desirable to withstand within 500 mm.

Next, the finishing planks are mounted. Installation of the lining begins with the installation of the molding of the ceiling (No. 2), or the molding of the starting (No. 6), or the combined version of these slats (on the floor of the planlet number 2, on the ceiling number 6 or vice versa). (Fig. 2) can be installed without molding ceiling in the event that later the option of mounting the floor plinth is considered, or the ceiling finish with the use of ceiling plinth.

We must not forget that when installing the molding of the ceiling (No. 2), the floor in the room should be fully ready (a ceramic tile is laminated, etc.)
In the case of installation of the starting plank (molding number 6), it is possible to filling the floor to the finite and installation of the plinth after the walls are lined with panels.

After the initial and final planks are mounted (at the floor and ceiling), you can start the installation of PVC lining.

Installation of lining is preferably starting from the angle of the room (buildings). To this end, the corner moldings adjust the corner moldings vertically, fixing them to the crate or to a pre-prepared wall. (Fig. 3)

After installing the corner bar, the installation of panels can be guided both to the right and left, but always scallop lining should be located towards movement.

To focus on the metal of the wallboard in height, it is a bit of flexing, first insert into the grooves of the initial and ultimate slats, and then in the groove of the outdoor (internal) angle. When fitting the lining in height should not forget about the gap on the temperature expansion of the panels, which is in the summer - 5 mm, in winter - 10mm.

After it is installed and nailed with small identical cloves (or furniture stapler brackets) the first lining, the second and subsequent classes are fitted, the second and subsequent way. The verticality of the installation each time is controlled by the construction level.

When approaching the door (to the window), the PVC lining is cut in accordance with the opening, and the cut-off ends are closed with molding end F (No. 3) or molding start (No. 6). (Fig. 4)

Window openings, niches can be framed as starting plank (№6) and molding end F (№3). (Fig. 5)

By installing, do not hurry, and it is necessary to remember that the aesthetic look of the room (buildings) from the "purity" of the work and the correctness of the installation of the corners.

Wooden rail

As a rule, the PVC lining is mounted on a wooden frame in a step of 40-50 cm, the cross section of the rail can be from 13 * 40 mm and more. Using the electric drill, a plumb and the mounting level, attach the rails with screws and dowels to the facing surfaces. In the event of irregularities of the walls (ceilings), the peel is aligned with the laying of wood, plywood, organity, etc. (Fig. 1)

In rooms with high humidity in the rails, small feeders (channels) should be made to ensure air circulation.
The lattices racks must be located at the beginning and at the end of the damaged surface (at the floor and the ceiling, at the beginning and at the end of the ceiling), as well as around the openings (doors, windows, sweatshin, etc.)
After the completion of the preparatory work, you can begin installation of plastic lining.
As a rule, the PVC lining is mounted on a wooden frame in a step of 40-50 cm, the cross section of the rail can be from 13 * 40 mm and more. Rake is attached to the base with a dowel-nail. A small space remains between the facing and the base, in which hydro, heat, and sound insulation, hide wiring and communications can be installed. But even without additional insulation, the plastic clapper is helped to reduce the noise level indoors. Mounted lining in rooms with high humidity, such as shower cabins, bathrooms, wooden slats are preliminarily recommended to be treated with an antiseptic, thereby preventing the appearance of fungus.

Installation on a plastic rail

Not so long ago, a new installation technology of plastic lining inside heated premises - using pVC mounting profile and special metal fixing brackets.

Plastic mounting profile :
allows you to quickly install, rinse with brackets with lining to rake;
simultaneously performs the function of the cable channel for the wiring;
not afraid of dampness, eliminates the formation of mold and fungi;
excludes warping;
universality of application (installation of PVC and MDF panels);
Low total installation cost;
the ability to dismantle the lining without its damage;
Installation does not require the use of additional tools.

Disease (Rake) PVC for mounting PVC lining. Size 3000x30x10

Clap for fastening PVC lining to plastic rail

Skobe - Used to fasten the wall paneling to the PVC mounting bar for the PVC and MDF lining. The use of the PVC mounting plank and kleimers during installation significantly reduces the total cost of installation work, makes installation work more durable than when using a wooden bar, does not require the use of additional tools and leaves the ability to dismantle the lining without damaging them at any time.

The procedure for making installation work on the installation of PVC lining using a mounting profile.
1. Rake is attached to the ground.

2. Reiki are attached parallel to each other, at a distance of 30-50 cm

3. Angular profile is risen when pressed on the bracket

4. The lining is inserted into the corner profile and its tongue is riveted with a screw to the mounting rail. The next lining is inserted into the previous one and also rushes.

5. The mounting plate can be cut into the desired length when using a saw with small teeth

Mounting on metal

Metalofilm He has increased corrosion resistance and has stable linear dimensions regardless of humidity. The base cladding is made using the Ceiling profiles of PPT 60 * 27 or 47 * 17, which are attached to the wall using special suspensions, and the guide profiles by cross section 28 * 27 and 20 * 20, respectively. To mount the PVC lining on the metal profile, the Self-timeline of MS 13-16mm is used.

The facing of this material is a very simple and "clean" method of finishing the room. One of the significant advantages of the lining is the highest manufacturability of installation work.

The wall of plastic lining is assembled as a designer for young children.

PVC panels are an excellent alternative to time consuming and expensive repair, representing a comfortable and easy-to-use decorative finishing material.

Therefore, the installation of plastic lining can be carried out with their own hands. Another important advantage of plastic lining is almost complete absence of various dust, dirt, waste and other "side effects", which simply cannot be avoided when performing repair work with other construction materials designed to finish the premises.

The auxiliary profiles provide a connection of panels on the outer and inner corners, are used when frameing window and doorways, niches, arches and other elements of the interior.

Plastic lining can easily be cut with your own hands as across and along, that is why problems with this material, when installation is performed, it does not occur.

In each other, this finishing material is connected by the simple principle of "groove in the groove". With such a type of connection, the extension can absolutely not coincide in coloring with panels or even be mirror.

Inserts are flat and relief. The lining has another number of benefits:

1. Democratic price.
2. Easy to assemble.
3. Aesthetic appearance, which is not modified throughout the life of the material.
4. The rooms that were led by panels look comfortably and original, and in order to support cleanliness, only water and a little detergent needed.
5. The material is made of solid polyvinyl chloride, and its hollow internal structure ensures fairly high sound and thermal insulation characteristics.
6. With the help of the plastic lining, you can hide all irregularities without much effort, etc.

Installation of plastic lining can be carried out by several methods:

• through nails with wide hats and preferably treated with a coating that prevent corrosion development;
• with the help of construction brackets;
• adhesive mixtures and compositions;
• with the help of self-tapping screws.

If the molding is mounted with your own hands on the surface that is in a vertical position, then the plastic lining must be fixed in no more than 600 mm.

If the installation of the lining is planned to be carried out on the ceiling, the step must be not more than 500 mm to avoid possible any possible savings.

In any embodiment, the plastic lining should be attached solely on a clean and perfectly smooth surface. Therefore, it is worth not to be lazy, but in your hand a cloth and wipe the surface.

How to start a building process?

In order to carry out the installation of lining plastic with their own hands, the following materials and tools will be required:

• plastic lining;
• brackets;
• pistol designed for brackets;
• saw;
• drill;
• self-tapping screw;
• wooden rails;
• small sandpaper;
• stationery knife;
• marker or Feltaster.

Stage 1.

For walls, the width between the rails should not exceed 30 - 40 cm, for the ceiling - no more than 30 cm. Rakes for crates are attached to the wall perpendicular to the direction of panels.

Before starting the installation of the lining, you need to build a frame. Of course, you can glue this finishing material directly to the wall surface itself, using ordinary liquid nails for these purposes.

But this option is possible only under the condition that the surface on which the lining will be glued, perfectly smooth.

It often becomes possible only after the walls were decorated with plasterboard sheets. With an ordinary construction, even the surface of the walls in the panel houses have their own flaws, and if they stick on them with plastic lining, it will easily fall off after a while.

With the help of the frame, the surface of the walls is aligned and, of course, the fastening process is simplified.

In order to create a crate. It is necessary to carry out the installation of rails by means of screws over the entire surface, where it is planned to mount the lining. Rock racks should be strictly horizontally. The distance between them should be no more than 50 cm.

This suit will help reliably mount the plastic lining with your own hands.

2 stage

Mounting plastic lining pattern: 1. Mount the lattice perpendicular to the direction of installation of PVC panel. 2. To finish the joints of the wall and ceiling, additional profiles are used to solve the corners. 3. Insert the panel in the initial profile, and secure it.

Installation of lining plastic with their own hands can be carried out by nails with fairly wide hats, screws or specially created for such purposes.

The latter method is the most simple and allows you to save a lot of time, because the protrusion of the fastener is rather narrow, so it is quite problematic with the help of self-tapping screws or nails.

It is necessary to measure the desired height of the plastic panel and cut it off using an ordinary saw or hacksaws with small teeth. Next, the cropped edge must be pulled out in shallow sandpaper, in order to continue the injury to the skin of the hands.

We continue the installation work

3 stages

The facing part is inserted into the groove of the profile, and then its mounting to each of the transverse guides is performed. At the final stage of the facing, before attaching the last element, you should pre-fix the overhead profile.

Direct installation of lining plastic with their own hands.

The first panel must be inserted into the corner or the starting strip and securely secure its edge through the brackets in those places where the panel edge comes into contact with the frame rack. The actual installation of each panel is carried out in 5 or 6 places.

Next, insert the next panel into the formed grooves and secure it in the same way as the previous one. Installation It is advisable to start with an angle. If the plastic lining is installed in such premises as a bathroom or shower, it is necessary to seal the compound from the bottom of the lining and the starting profile.

In order to make sealing, it is necessary to apply silicone, resistant to the effects of dampness or other similar to this sealant. Walking plastic with your own hands can be attached not only on the wall surface, but also on the ceiling.

The most difficult stage is the insertion of the most last panel in the final bar, which is why it is recommended to wear an corner immediately on it. In fact, the last panel is held on the bar of the previous steam panel and rests on the wall.

Final points of work

4 stages

After completing the installation of the panels, it should be cut in the hole with the holes for the sockets and the switches (if they are, of course, are required).

This work is performed through an ordinary stationery knife, jigsaw or hacksaw. Previously on the place where the neckline will be located, it is necessary to make marker using a marker or marker.

The plastic lining exists a wide variety of shades, so that the color of the color should not arise with the selection of difficulties. With its help, you can embody almost any designer idea, while spending the minimum amount of your own effort and, of course, my precious time.

Installation of such a finishing material is very simple, therefore absolutely everyone can cope with it. Buy the lining will also not be no difficulty, because it is sold in any construction store and is fairly cheap.

In addition, the plastic lining can also be used in the outer finish of country houses, cottages, etc. Such finishing material will help make an external and, of course, the inner appearance of your home is unique and attractive.

In addition to simplicity in the installation and its own aesthetic qualities, the plastic lining possesses and another weighty plus - it does not require any special care.

It is enough just to wipe the material with a soft cloth moistened in soapy water, as it is contaminated.

Therefore, if you still think if the installation work on the installation of plastic panels at home should be discarded all doubts and start work. The positive qualities of this material are much more than negative, and by installing the lining, you will never regret it.

It is no secret that modern repairs are a combination of quality materials, high technologies and qualified personnel, which leads to tangible financial investments. However, the cost of repair can be significantly reduced without a tangible loss of quality, using the PVC lining for external work and vinyl lining for internal works.

Also, she often sends the ceiling. Looking through the photo of building materials, many owners prefer not to usual tiles, namely plastic lining or panels, and often decide to work on their own, focusing on the photo and video instructions and carefully reviewing customer reviews about the material.

• Main advantages
• Payment
• Installation
• Reviews of plastic lining

Many firms make a distinction between the clapboard for outdoor work and panels. Externally, they are similar, but there are nuances, this is confirmed by the feedback from the borrowing, which collided with finishing work. The lining is characterized by a suture compound, and the panel of seamlessness and greater width. There are also differences in the structure and painting: as the lining is more often used for external work, it is painted on both sides, panels are painted with one front side. Also lining for outdoor operations withstands large temperature differences.

Evaluating the advantages of plastic lining and panels, today, fewer people are facing the walls with tiles or used for exterior works of brick.

Main advantages

Plastic lining for outdoor work and internal cladding a lot of advantages:

1. Standardization of sizes. When installing, the situation often occurs when the calculation of materials on the walls and the ceiling was incorrect. In the case of plastic lining for exterior works and panels for interior decorations, you can be sure that the recovered plastic panels are perfectly coincide with the size and shape of the joint.
2. Strength. At the expense of a cellular frame, plastic lining has a good margin of strength to mechanical stress, which makes it suitable for external work. Many firms promise high strength of their panels, offering portfolio of samples. However, no photo will show the strength of the lining, so, as the customer reviews show, it is best to choose personally literally to the touch.
3. Easy installation. A person is not even familiar with construction capable of mounting panels on the finished crate. Solarsno numerous reviews, the properties of plastic lining allows partially to level the error and smooth the inaccuracies of the installation.
4. Density of junction. Modern models of lining for exterior work and inner cladding have a design that allows you to minimize the joints between plastic panels, and sometimes visually make the joints in invisible.
5. Aesthetics. Playing in the rays of halogen lighting plastic panels please the eye, and the white vinyl ceilings are not losing color. In the case of proper installation, the lining for exterior works and panels for internal, create the effect of a monolithic seamless cloth, ideal geometry. Satisfied buyers confirm this with numerous reviews.
6. Special physical properties, such as heat and sound insulation. Due to its cellular structure, the vinyl lining is an excellent insulator and is suitable for internal work and for outdoor siding. In addition, the installation technology allows you to lay additional thermal insulation under the lining.
7. Wide color gamut. Due to ubiquitous use, there is a huge amount of lining of various textures and colors. According to the reviews, the shades of white are most popular.
8. Resistance to moisture, rotting, damage to microorganisms. The manufacturability of materials from which the vinyl lining is made allows to avoid many problems that are characteristic of other finishing materials. This is especially valuable for external work.
9. Resistance to ultraviolet. PVC lining can be used for internal works and for external finishing. They are not afraid of direct sunlight and do not change their structure under their impact. Do not yellow and do not lose their dazzling tint even white finishes.
10. Fire safety. The use of vinyl lining is preferable to other materials, as it is not a combustion, and when exposed to ultraviolet and heat does not highlight hazardous substances and volatile compounds.
11. The durability of the appearance. You can be sure that when complying with the installation technology of plastic lining, both for exterior work and for internal, it will still be happy to please with its appearance, exactly the same as in the photo, which confirm the reviews of specialists and customers.
12. Masking communications. The feature of the installation of vinyl lining both for internal works and for external, is that there can be a small cavity between the wall and the crate, in which pipes, wires and other communication objects can be located.
13. Untitable to operate. If you occur pollution, you can remove them with a damp sponge, even the white surface remains perfectly clean. The rest of the vinyl lining is not demanding of maintenance and care.
14. Thermal dependence. At the expense of its chemical properties, the lining for external work and internal cladding is resistant to temperature drops up to 50 degrees, does not shrink and is not subject to corrosion. Panels for internal work are characterized by slightly smaller than thermal resistance, but in rooms and there are no large temperature differences.

Required tools and materials

Mounting technology of plastic lining for exterior works and inner cladding is common.

For mounting plastic lining and panels, the following tools will be required:

1. Perforator. To mount the crates, it is necessary to place the places of future fasteners in size, make holes under a dowel-nail. About how to mount the lining / panel will go below. As a rule, a dowel-nail of 6 to 60 is used.
2. Screwdriver. For mounting plastic lining to the crate. Special screws are usually used, in common "bugs" or "seeds". Fasteners are carried out directly through the grooves of the lining to the crate or with the help of special mounting.
3. Electric jigsaw. When installing the clap / panels, the need to cut the plastic surface occurs. The longitudinal incision is carried out with the help of a building knife, but transverse, in size, more convenient to produce with an electric jig. It is important to remember that plastic panels / lining a rather fragile material, so before cut, you must install the pink with a minimum step of the teeth for a more flat cut. In the absence of a jigsaw and the presence of skills, the cutting of vinyl lining / panels can be made and a conventional knife.
4. Construction marker. To mark the fastening of the crate and markup of the cutting panel / lining in size.
5. Construction roulette. When installing plastic panels / lining, the accuracy of the size of the cut is very important. With an error in more than 3-4 millimeters, the plastic panel / lining will not be installed to mount in the starting profiles or one of the edges will perform the entire design of the aesthetic type of the lining / panel.
6. Construction knife. Need for the longitudinal cut of the panel / lining in size. It is needed when finishing with clapboard for outdoor work.

The composition of the materials may differ depending on the type of selected crate, the designer solution and the type of PVC panels, their options can be found in the photo gallery on our website.

Materials that will be prescribed for installation:

1. Starting profile. Plastic profile P-shaped form. The longer end is attached to the crate, the other is used as the finishing to hide the irregularities of the edges of plastic panels and lining for outdoor work, as well as to hold them along the edges.
2. Self-tapping screws (bugs). Special fasteners for fastening the plastic panel to the crate. How to fix without special self-tapping screws? Fix the clap on glue is problematic, so the most common type of fastening is the screws "bugs"
3. Plastic lining for internal works or external siding.
4. Plastic corners. Outdoor, internal, docking, plinth - different types of corners in shape and size, intended for hiding the irregularity of the clap cutting.

Lining PVC for outdoor work: Price

One of the main advantages of plastic lining is the price, they are confirmed by numerous customer reviews. You can buy plastic lining on any construction market or order via the Internet. On our site can be found in photos, PVC panels and customer reviews.

Name	Gabarits.	Price 1 piece
PVC panel	3000x100x10 mm	54r.
Lining PVC (beige)	3000x100x10 mm	63r.
Lining PVC (Blue)	3000x100x10 mm	63r.
Lining PVC (Salad)	3000x100x10 mm	63r.
Lining PVC (brick)	3000x100x10 mm	63r.
Lining PVC (cream)	3000x100x10 mm	63r.
Lining PVC (Mahagon)	3000x100x10 mm	63r.
Lining PVC (Dark Walnut)	3000x100x10 mm	63r.
Lining PVC (peach)	3000x100x10 mm	63r.
Lining PVC (Gray)	3000x100x10 mm	63r.
Lining PVC (gray marble)	3000x100x10 mm	63r.
Lining PVC (Pine)	3000x100x10 mm	63r.
Lining PVC (chocolate)	3000x100x10 mm	63r.

In more detail, prices can be clarified by the PVC manufacturer. The price per M2 is calculated based on the lining pattern. How much costs 1 square meter is clarified by the supplier.

First you need to calculate the perimeter, which in this case is 14 meters. With the width of the panel of 10 centimeters, we obtain the required number of panels for finishing the walls of 140 pieces. To finish the ceiling, another 40 PVC panels will be required, most often the owners buy white. Total we get a quantity equal to 180 panels. With an average price per vinyl panel, equal to 63 rubles, we have 11340 rubles.

We will need 26 meters in the inner corner and 12 meters of floor border. With an average price of 50 rubles we get 1900 rubles. The fasteners "bugs" will cost about 50 rubles. Total we get an amount equal to 13290 rubles. No other type of interior decoration will hide all the flaws of the walls and the ceiling for such an amount. Therefore, according to the reviews of the hosts, which decided to finish the PVC panels are the perfect option for budget repairs.

Many people have truly "golden" hands, but do not know how to install plastic lining properly. This can be learned by photo and video, such instructions provide our site.

Installation of plastic lining begins with marking and determine the curvature of the walls. After an income is installed, one of the goals of which to level all surface irregularities for further installation. It is important to remember that the racks of the latch of the future PVC lining should be at a distance of no more than 60 centimeters from each other. Otherwise, there may be barely noticeable savings of lining and further problems when installing. In the case of installation of plastic lining on the ceiling, wires and cables are hidden in a niche under the crate.

After installing the crates, starting profiles are attached to three sides of the room. Fastening the lining is carried out on the tapping screws "bugs" or by the assembly stapler. When installing the first panel, it needs to trim the mounting groove that will lay down to the wall. This is usually done by the mounting knife. The PVC panels are carried out in such a way that the length of the panel is equal to the width of the room minus one centimeter.

This is done for two reasons:

1. For the convenience of mounting. First, PVC lining is inserted into one groove until it stops, then pressed to the crate and shifts 5 mm to the side of the opposite groove. This is especially convenient such a mounting scheme on the ceiling. The illusion of seamlessness is best provided with white shades.
2. To ensure mobility of lining. They can expand and narrow depending on the temperature regime.

Holes for luminaires on the ceiling are cut with a jigsaw or mounting knife, with pre-marking. It is important to remember that installing the tices for lamps is necessary in such a way that through the holes in the PVC clapboard can be easily dismantled and replaced with the lamp.

Last PVC panel is installed without a starting profile. It is glued at the very end of liquid nails or other glue to the clapboard.

Plastic lining and panels are successfully competing with metallic siding and tiles. If you compare them in the photo, the injecting people will not find differences, and in real life, the vinyl panels and the PVC lining for exterior work sometimes look even better than their analogues.

In addition, they are available at the price if some of the panels will be randomly spoiled, you can easily buy a new one, exactly the same. And if you want to change the interior, you can be cheaply replaced in full, in this case they will be attached to the old crate.

Reviews of plastic lining

Igor, 32 years:

Last spring, I decided to improve the appearance of my garden house. Compare different materials for the price and concluded that the plastic lining for external work is for me, as a pensioner, the most affordable means. Masters did not call, all the work on installing PVC panels was performed with grandson. The result was pleased. I plan to separate the white plastic clapboard the ceiling on the veranda.

Olga, 28 years old:

We decided to make the euro repairs in the apartment. For a long time they could not decide on the decision for the ceiling until the husband found the output and an alternative to the dear stretch ceiling. We bought seamless white vinyl panels for internal works, the husband did everything himself, without inviting foreign people. I stayed very pleased with the trim of vinyl lining.

Victor, 36 years old:

We with the neighbors around the room in the hostel were told to make it repairs to their money exploit. The scholarship will not be attended to the scholarship, so we decided to buy the most budget wallpapers, but the ceiling facing made plastic clapboard for internal works. We coped with your own along with the room. All wires and cables were let the ceiling. It turned out beautifully and now no wires interfere with the legs, and the white ceiling is so white that such a shade cannot be achieved by any wallpaper or painting!

Plastic lining (vinyl, PVC) is a polymer finishing material that has won the popularity of users from the moment of its appearance. It is made of polyvinyl chloride (PVC), chalk and plasticizers, extruding method.

PVC refers to environmentally friendly raw materials. This statement is confirmed by sanitary and fire certificates. For example, one-time dishes and medical syringes are made of it.

PVC lining (plastic, vinyl)

It is worth noting when it comes to plastic lining, it often arises confusion between concepts - lining and plastic panels. Their difference in appearance and appointment.

What is the difference between plastic lining from plastic panels

Plastic lining can be used for both internal and exterior decorations. In appearance, the PVC lining is among the average between polycarbonate and wooden clapboard. With polycarbonate it is a porous "cellular" structure. And with wooden slats - aesthetic appearance and a convenient installation system "Paz-Comb".

Outdoor plastic lining always has a suture compound. This is due to the fact that plastic has a large linear extension coefficient. And the lining mounted outside the building should be able to "play", i.e. Move under the influence of temperatures. Another difference between the PVC lining from the panels is that the color pigment is added to the initial raw material, and not covered on top (paint), so the lining does not lose its color for a long time.

The plastic panel has a large width and provides a seamless connection. The panel is covered with paint only with the front side, which can lead to abrasion of the facial layer and eliminates the use of panels as an outer decoration. In addition, the panels do not always include the components that give them resistance to temperature and ultraviolet.

If in a nutshell, then plastic lining is better suitable for outdoor work, and panels for internal.

But at the same time plastic lining, and the PVC panel allows you to carry out a beautiful and budget interior decoration of surfaces.

Plastic lining - advantages and disadvantages

Comparison of advantages and disadvantages

Pros:

• standard dimensions;
• strength;
• ease of installation;
• joint density;
• aesthetic appearance;
• heat and sound insulation properties due to cellular structure of the lamella;
• wide color gamut;
• resistance to moisture, rotting, damage to microorganisms, etc.;
• resistance to ultravioleti;
• fire safety. PVC lining does not burn and does not support combustion;
• preservation of appearance;
• the ability to hide surface irregularities and hide communications;
• ease of care;
• resistance to temperature drops (+/- 50 ° C).

Minuses:

• fragility. The lining is afraid of mechanical damage. It is worth noting that the fragility of the product depends on the content of the chalk in it, which in turn is determined by the manufacturer;

• the presence of a specific smell. Eliminated within a few days;

• ban for use in some places. For apartments and houses, the ban does not apply.

Comparison of plastic and wooden lining - what is better

If all of the listed advantages of the PVC lining were not convinced, we offer a more detailed comparison of two popular species of wood and PVC lining.

Thus, the PVC lining is excellent, but cheaper, alternative to wooden lining.

Resistance to moisture	100%	Depends on the tree of wood and the quality of additional processing
Weight lamella	Small. Thanks to the hollowness of the material. PVC lining easier to transport, it's easier to mount, it does not need a frame under it	Significant. Weight depends on the dimensions of the lamella, the density of the wood of wood and its humidity
Cost	PVC lining on average two times cheaper than lining wooden
Color spectrum	Diverse - from white and monophonic colors to imitation of the structure of the tree	Determined by the tree of wood, in the method of cutting (radial or tangential) and additional finishes
Color stability to burnout	High-quality PVC panel does not change its color	Lining hardening is inclined to darken over time. Wedding coniferous rocks saves its color longer
Sound and thermal insulation	Identical. Only in the case of plastic clappers, the indicators are achieved due to the features of the structure of the lamella, and in wooden due to the density and structure of the wood.
Spray	It does not burn, does not support combustion, but melts at high temperature	Burning
Ban for use	In places of evacuation aisles in public buildings. Near fireplaces, in saunas and baths	Children's rooms, medical institutions
Operating temperature range	+/- 50 ° С	Much higher
High temperature resistance	Low. At high temperatures plastic begins to deform	Excellent
Storm resistance	Low	High
Toxicity	Minimum (depends on the manufacturer)	Mining
The ability to create microclimate	Absent	Excellent. The effect depends on the wood and additional processing breed

In addition to competition with wooden lining, plastic lining (vinyl) competes with a similar product of other manufacturers. The comparative characteristic of the averaged indicators of Chinese and European (incl. Domestic) PVC lining is shown in the table below.

Plastic lining (PVC) - dimensions, characteristics and properties

• number of waves: one and two-wave panel;

• length - 3 000 mm. and 6,000 mm;

• thickness - 10 and 8 mm. The market already appeared in the market with a thickness of 7 mm;

• facial coating. Manufacturers offer the market two main types of coverage: glossy and matte. Sometimes it is found, the so-called half-one coating. It is worth noting that the appearance of the coating is not reflected on the quality of plastic lining;

• configuration. Plastic lining is identical in appearance with wood wallpaper.

  Plastic lining "Block House" But, recently there appeared plastic lining under the "block house". In addition to the appearance, it is characterized by a greater plasticity and the presence of special additives, which report material to frost resistance and greater burnout resistance. The thickness of such lining also makes 10 mm.

Accessories for plastic lining - species and characteristics

Installation of plastic lining is performed using special profiles - decorative moldings.

Varieties: Starter (initial), connecting, F-shaped end, universal, external and inner corner, cornice (ceiling plinth).

The appearance of the profile for the PVC lining and its purpose is presented in the photo.

Types and appointment of profile for lining PVHTIP profile for plastic lining

• profile length - 6 000 mm;

• groove. Purchase accessories needed, given the thickness of the PVC panel. So, under the plastic thickness of 10 mm, you need to buy fittings of suitable parameters;

• color spectrum. You can choose a profile for any color of plastic. The exceptions are colors under the tree. In this case, the brown profile of a suitable shade is purchased.

How to choose a good plastic lining

Choosing a plastic panel can be focused on the price, because the quality product is worth a lot. But not to bathe a good bad product, you need to know the key points that determine the quality of plastic lining:

PVC thickness clap.

The thicker the vinyl panel, the greater the load it is able to withstand. Generally accepted is a thickness of 10 mm. However, for the ceiling, you can purchase more thin lining.

The thickness of the facial surface of plastic lining Thickness of face surface.

Determines the ability of the whole lamella to withstand mechanical damage, jurisdiction, blows, etc. If the stiffness ribs are viewed through the front side, this panel cannot be applied as a wall or external facing. And on the ceiling, where the likelihood of strikes is minimal, it will not look aesthetic.

Rebar stiffness plastic lining Number, location and rigidity of the vertical edge.

The more ribs and above their rigidity, the more stable there will be a panel to mechanical damage.

PVC ribs The distance between adjacent ribs should not exceed 10 mm.

If the ribs of stiffness were blocked during the transportation process, during installation on this part of the surface, dents will be clearly visible, even if the front side of the panel does not contain damage.

PVC colors homogeneity Uniform color.

Some manufacturers do not knead the color pigment into the polymer mass, and they only apply it on the front side of the plastic panel. For the user it is fraught with the fact that all scratches will be visible. In addition, the lining thus painted in this way will burn faster and unevenly.

• toxicity. Part of the lining is made of toxic raw materials. When buying, ask the implementative to provide the appropriate certificates. By the way, the freshly printed packaging of the lining will have a light specific smell, it is normal. But if the smell has a panel, exposed as a sample, this is an occasion to bypass such a lining side;

• weight. The wall thickness, the number and rigidity of the ribs of stiffness directly affect the mass of the finished product. Weight of standard plastic lining - 1.1-1.5 kg / m.kv.;

• panel connection. Before you buy, check several lamellas for the strength of the connection;

• the content of chalk. Professionals converge that high-quality plastic lining should contain no more than 20% of the chalk. The increased content of chalk will lead to fragility of lamellae. However, the chalk refers to inexpensive raw materials and is often used by manufacturers in order to reduce the cost of production of panels.

To do this, the corner of the panel is sufficiently slightly. If it is plastic - you can work with the panel. If a crack and a white strip appeared on the site of bend - the content of chalk exceeds the normative indicator.

• trademark. Famous plastic lining manufacturers earned a reputation for a long time, and therefore try to follow the quality of their products.

Conclusion

Based on this, we can conclude: not all that is good, which is cheap. Savings on the purchase may pour out a significant cost of funds associated with the repair of a part of the lined surface or in general with the new trim. Good plastic lining will decorate your interior and will not change its physicomechanical and aesthetic properties for a long time.

Tags: Lining Finishing Material Facing Material

To create a beautiful and practical surface, various modern materials are applied. One of them is plastic lining. In most cases, the ceilings, the inside of the balconies and the outside of houses occur with this material.

Main characteristics of material

The basis for the manufacture of plastic lining is polyvinyl chloride. Therefore, the finishing material has all the properties characteristic of PVC:

• inconsistency of rotting;
• refractory;
• moisture resistance;
• long operational period;
• preservation of the initial type throughout the service life;
• resistant to the effects of temperature differences, precipitation and ultraviolet rays;
• ease of installation and maintenance of the material;
• acceptable cost.

Due to the presence of honeycomb, the lining has excellent sound insulation characteristics. The smooth surface of the material allows it to not process or heave the special composition (as provided for wood panels).

A large range of color scheme makes it possible to implement any design solutions to the reality. You can purchase plastic lining under the tree, thereby replacing wood more practical and durable coating. The same applies to plastic lining for a bathroom, which can replace tile or other finishing material.

But the sphere of application of plastic lining is not limited to the interior of the premises. The material is suitable for facing the outside of the house. The only nuance is that the outer plastic lining should contain components that make it more resistant to negative temperature and atmospheric precipitation.

The disadvantage of PVC lining is instability to mechanical exposure. It does not withstand the load more than 1.5 kg. A large pressure on the material can lead to the appearance of a dentin or spoil. Due to the low strength, the installation of plastic lining is carried out in places with a minimum number of people.

Preparatory stage

Before proceeding with such a process, how to shelter the plastic wall wall (or ceiling), follows:

• calculate the need for materials;
• prepare a surface.

Calculation of need

There are the following standard dimensions of plastic lining:

• panel length - 3-6 m (facade), 3 m (for interior decoration);
• width - 10-25 cm.

Based on the size of the panel, and the procured material is determined. For example, if the ceiling dimensions are 4 * 3 m, then the minimum will need 16 three-meter panels with a width of 25 cm. Experts recommend buying a 15-20% material. In our case, it should add 3 more pieces to 16 panels.

Installation of plastic lining occurs on the frame. For its manufacture, a wooden beam is used by a cross section of 4 * 2 cm. To calculate the required amount of timber, the step of its attachment is taken into account. Usually adjacent bars are mounted at a distance of 0.8-1 m from each other. Thus, for the ceiling of 4 * 3 m, 7-9 bars with a length of 2 m will be required.

Surface preparation

This stage involves the removal of an old coating, if it interferes with the device of the crate, and leveling the base.

Next, the installation of vapor barrier material (polyethylene film or runner) is carried out. Fastening of vaporizolation is carried out using a 2-3 width rail. Small holes are made in the upper and lower part, which improve ventilation.

Frame device

To carry out high-quality installation of plastic lining for internal work, a doomle made of wooden plates. The use of this material will contribute:

• wall alignment;
• the appearance of the ventilation gap between the facing and the wall.

If there is a strong uneven wall, you will have to use linings or a thicker timber, which is stacked under the frame racks. As lining can be:

• plywood;
• pieces of a wooden bar;
• installation wedges.

Dowel-nails are used to fix timber bars. The lower rails should be located at a distance of 5-6 cm from the floor (for fastening the floor basement), the upper - at a similar distance from the ceiling (for the ceiling plinth). Also, the frame is created near door and window openings.

The direction of fastening of the bar for the crate depends on the location of the rivers, with the help of which the vapor insulation material was recorded. If the railproof rails are vertically, then the frame for the frame will be mounted horizontally (and vice versa). Long screws are used to fix the crate to the rakes of vaporizolation.

Surface thermal insulation

After the arrangement of the crate in the resulting space between the rails, laying of thermal insulation material is made. Usually used mineral wool, for reliable fixation of which is used polypropylene twine with a construction stapler.

When finishing a plastic bathroom car room over the thermal insulation material, another layer of vaporizolation occurs. After that, you can engage in the shearing room with finishing coating.

Optional is the use of insulation when the warm room is lined with clapboard. In this case, the space between the finishing material and the wall can be laid elements of communication systems.

Mounting work

Now directly to how to fix plastic lining. Work begins with the angle of the room. To make easier screws screwed, under the fasteners it is advised to make holes. For these purposes, a thin drill is applied.

Immediately there is a mounting of the starting plastic profile (molding). After that, the lining panel harvested in size is mounted in the molding that side where the spike is located. Be sure to check the correct location of the panel in the vertical / horizontal plane. Only after such a check, the final fixation of the panel is performed.

In addition to using screws, you can also use:

• construction stapler with brackets;
• fasteners intended for laminate;
• liquid nails.

Despite such a variety, the use of screws will be the best option.

The technology of fastening the following panels will not cause difficulties:

• appropriate measurements are made;
• with the help of the knife, the desired piece of material is cut off;
• the sliced \u200b\u200bpanel is inserted with a spike in the groove of the already laid out lining;
• snaps over the entire length of the panel;
• the opposite side of the panel is fixed to the frame of the carcass with self-draws.

The last panel is inserted with one side in the corner molding, and the second is in the groove of the previous wallboard. In the same way, not only walls, but also the surface near the doors and windows is facing. The finishing finish of the cropped parts of the material occurs with the help of a decorative profile. The installation of panels is carried out perpendicular to the crawl brush.

In the process of facing the room with plastic clapboard, it is necessary to provide holes for communications. To a greater extent it concerns the laying of wiring. If lamps or chandeliers are subsequently mounted, the lamp should be strengthened with additional planks.

Mounting video plastic lining:

Along with the wooden wallpaper, the PVC lining for exterior works has long been used.

Vinyl and plastic board is equally in demand for the inner and outdoor sheat. Thanks to the practicality of this material and the simplicity of its installation, to cope with the outer decoration, even non-professional.

Plastic lining is different from wooden not only materials, but also by the structure. Its internal structure is similar to honeycombs - a lot of flared cells. This causes its advantages and features of use.

Product specifications

Initially, the vinyl lining was used in the railway sector to cover the wagons, which explains its name. Outside, this material looks like an ordinary smooth board with fasteners, but, thanks to its special "cellular" structure, plastic lining has good heat and sound insulation.

The advantages of vinyl lining

1. High resistance to moisture. As you know, wooden finishing materials when exposed to water are susceptible to rotting. So that this does not happen, they must be painted by special compositions. Not all manufacturers seek to treat their products with varnishes and paint, so this task falls on the buyer's shoulders, which requires additional costs of money, time and strength. At the same time, the plastic lining for the outer decoration does not need this processing.
2. Insect resistance. As you know, wood is a nutrient medium for tree beetles. To protect the wooden house, it needs to be painted or treated with special compositions. At the same time, plastic coverings are absolutely not interested in insects.
3. Application in a wide temperature range. Depending on the wood breed, wooden materials react differently to temperature differences. Boards can crack, twist and deform from severe heat or frost. At the same time, the outer plastic finish can be used with the same success with a fifty-degree frost and a fifty-degree heat.
4. Resistance to sunshine. This advantage is especially important if the finish is at home with lining outside. Therefore, it is used to design houses, terraces, veranda and balconies.
5. Long service life. Plastic materials do not lose external attractiveness over a long period of time. They should not be repaired, rub, process and cover various paints. If necessary, PVC panels can be easily painted in the desired shade.
6. Proportion of burning. Houses, covered with plastic clap, in contrast to wooden, do not need to be treated with special antipirens.
7. Easy installation work. PVC products are perfectly bent and cut out, plastic boards quickly dock, due to which the installation time is noticeably reduced.
8. A wide range of sizes and shades.
9. Easy care. To maintain PVC finishing at the proper level, it is enough to wipe it with a cloth or wash a soft brush.
10. Democratic work of work. Plastic lining without exaggeration is available to all segments of the population.

Disadvantages of lining PVC

Despite numerous advantages, this material has its drawbacks.

Because of the low strength of the plastic sheathing on the wall of such a house you can not hang anything heavy. In addition, the cladding installed outside may not withstand a strong blow from the street.

Vinyl does not let air. Therefore, if you decide to cover the walls at home with a clapboard, you need to leave the space for the circulation of air between PVC boards and the wall so that the thermal insulation has not sent.

Due to the fragility of this material and the high probability of damage to the finishes, only those houses are recommended to wash the flooring outside, where there is no intense human stream, since the chances of surface damage increase.

Advantages of vinyl lining for outdoor work

Despite the comparative fragility of plastic lining, many arguments may affect the solution to cover the building outside.

Polyvinyl chloride lining has a smooth glossy surface, due to which it does not need to be processed and protecting protective compositions.

The lining is produced in various color solutions, including under wooden panels, however, if you wish, you can easily paint in the desired color.

Due to the presence of special grooves, installation work and finishing with lining of any surfaces is carried out easily and quickly.

In addition, plastic is not corrosion and rotting.

The composition of PVC boards for outdoor work includes a special component that increases its frost resistance, so when buying a material for the object of the house outside, check the marking.

Scope of application

Thanks to its qualities and a democratic price, plastic lining is widely used in a variety of spheres.

The most important advantage of its advantage is the absence of the need to process the surface before mounting.

Lining hides irregularities and wall defects. You can handle the clapboard facades, ceilings, balconies, corridors, verandas and arbors.

The lining is indispensable not only in outdoor work, but also in the interior, where there is an increased humidity. Support the optimal appearance of walls, covered PVC plates, does not represent difficulties - it is enough to simply wipe them with a wet brush. If you wish the wall and other surfaces, it is easy to paint in the desired color. After all, the lining is not afraid of moisture.

Vinyl PVC plates are ideal for finishing cottages or a wooden house.

The sheathed surfaces are capable of withstanding strong frosts and sharp temperature differences, thanks to the special component in the polyvinyl chloride.

It is impossible not to mention such an important dignity of vinyl plates as flexibility, due to which the finishing works can be carried out in the most inconvenient places.

Plastic is a very affordable and inexpensive material. You can buy plastic boards in any construction store.

The lining is a universal finish, equally well suitable for external work and for internal skin.

Montaja technology

In order to cover the facade or inner surface of the room, special training or special equipment is required.

Required tools and materials

For quick and high-quality installation work, you need such an inventory as:

• electrolovka or hacksaw;
• a hammer;
• electric drill;
• screwdriver or shurtpers;
• stapler;
• water level.

Materials will be needed:

• lining PVC;
• wooden bars for the crate;
• self-tapping screw and dowel;
• L-profile or plinth.

Procedure for performing work

Work on the installation of plates from polyvinyl chloride is carried out in several stages:

1. First of all, it is necessary to prepare the area for which PVC logs will be installed, remove the garbage and clean the surface. If necessary, you can remove pieces of detachable plaster.
2. Then in wooden bars need to drill holes under the self-tapping screw at a distance of 50 centimeters from each other. To avoid further unpleasant surprises from insects or high humidity, the bars should be painted or covered with oil.
3. Then wooden bars are attached to the walls, for which the holes in the size of the dowels are drilled in them. According to the technology, the distance between the bars should not exceed one meter.
4. To avoid irregularities, the bars are aligned with the level. Then, a L-profile or plinth is fixed along the perimeter of the facade.
5. The first vinyl board is inserted into the plinth one side, and the other is fixed to the stapler clamp. All the following panels are inserted into the grooves of the previous one and are also attached to the bars. If necessary, the panel is cut by a jigsaw or knife.
Sewing a wooden house asbestos cement under round stone