The interior design and exterior, made of wood always looks beautiful, eco-friendly and safely. The tree allows you to give the uniqueness of the premises, make a highlight, fill with a pleasant aroma, insulate and protect the house from excessive humidity. In this article we will talk about the types of finishing materials from the tree, about the advantages and disadvantages, and we will also help choose the right material for the inner and external sheaving of the house.

Types of materials and scope

Wood products are widely used for both internal and external finishing at home. Tree is used for cladding:

• walls;
• facades;
• outdoor coating;
• stairs;
• internal and carrying partitions;
• window, doorways;
• separate decor elements.

Finishing materials made of natural wood are able to create a beautiful microclimate indoor, as well as perform the function sound and noise insulation, hide defects and emphasize the individuality of the interior. The construction market offers a large selection of wood-based materials. For internal and external finishes, the following materials are used:

• block house;
• lining;
• decon;
• decorative wallpaper;
• wood panels;
• parquet and outdoor board;
• glued bar;
• hussvabok;

For the inner or exterior decoration, the buildings of deciduous trees are most often used: ash, oak, nut or maple. But from coniferous rocks, as a rule, choose pine, cedar or red tree. To choose to be easier, you can use product evaluation criteria:

• availability of material;
• the complexity of the care of the product;
• what degree of material processing will be required when installing it;
• compliance with material to wear resistance and operating conditions.

In any case, before buying facing material, you should learn about each product in detail.

Characteristics of facing materials

Wood-based materials perfectly fulfill the finish of various constructions from concrete, metal or brick. For the interior decoration, the ceiling and walls are most often used by coniferous species, for flooring and stairs use solid wood, and a high density tree and resistance to the external environment are used for outer decoration. Consider the characteristic of wooden products.

Block house

Block House is one of the subspecies of the lining, the appearance of which looks like a rounded log. The product resembles a log house and is used for internal and external work both as a base material and as performing decorating individual elements. The main advantage of the Haus block is:

• durability;
• high thermal insulation and sound insulation;
• high strength;
• ease of installation;
• fireproof, due to special treatment with antipirens and antiseptics;
• sustained to shock, not deformed.

Lining

It is an economical and optimal option for finishing at home. The production uses the species of trees: pines, ate, oak, alder, linden. The main advantages of the material include:

• large service life;
• high resistance to mechanical damage;
• easy installation;
• high sound insulation;
• the ability to apply painting or toning.

But from the disadvantages you can note the possible appearance of insects and fungus. The photo shows the trigger of the attic room.

Important! To protect the tree from the attack of rodents, and insects are necessary when laying excluding the presences. The resulting free space is filled with mineral wool, which is capable of still performing additional sound insulation.

Deoping

• loggia or balcony;
• terrace.

The use of decopground will allow finishing and decorative work. The material is stable, not afraid of open space, resistant to mechanical damage and scratches. Caring for a terrace board is quite simple and lies in a wet cleaning. Description of decoing laying on the porch of the house

Decorative wooden wallpaper

Decorative wallpapers for walls are produced from the wood of valuable breeds. In addition to the wood, there is a veneer in their composition, which is thoroughly glued on dense paper. The advantage of wallpaper is the possibility of their pasting on radius areas of the room.

For information! For a long service life, wooden wallpaper must be treated with wax, varnish or oil. Wallpapers are able to change their color and size (swell) when direct sunlight or water gets.

After decoring the room with wooden wallpapers, the room is dressing a chic and original appearance. An example of the original living room trimmed wooden wallpaper

Panels from wood

In the production of panels, the trees are used as: alder, maple, cedar, oak. The decoration of walls from wood looks exquisite, unusual and noble. The panel has three layers with a facial surface made of veneer made of breeds of valuable trees. To give a spectacular appearance and increasing the service life of the panel are covered with special wax or acrylic varnish.

For information! Wooden panels treated with wax are considered the most environmentally friendly, unlike acrylic processing. Specialists recommend using panels treated with wax for finishing walls of wood in a children's room or bedroom.

There are still tinted panels, in the manufacture of such wall panels, the tree is used from the pine massif. Such material is easy enough to install and has a lower price. It is not difficult to care for the panel, quite ordinary wet cleaning without the use of chemicals. The photo presents the interior of the living room made using wooden panels

Parquet and outdoor board

Outdoor board and parquet are used for interior decoration and laying floor from laminate, parquet and other materials. Such material requires a thoroughly level surface in the work. Thanks to the large selection of drawings, the color palette and the texture of products, the floor boards are perfectly combined with various designer solutions. The photo shows the living room decorated in Scandinavian style using an outdoor board.

Important! The board or parquet will last longer if you choose a suitable substrate and carry out the correct flooring.

Glued bar

Glued bar - universal material. It is widely used to perform external work on the skin of houses, as well as for internal work for the construction of architectural elements of the structure. It is used for the device:

• ceiling beams;
• devices railing and openings;
• decorating stair railings;
• decorative partitions.

The glued bar is quite durable material, resistant to damage and is not afraid of deformations or cracking. The photo shows the house covered with glued bar

Hussvabok

This is a modern material that has a huge number of different types of profiles (more than ten thousand) and capable of perfectly combined with any interior. The hewscarette panels are easy to connect and mounted, and the hidden connection allows you to collect the correct pattern. The advantage of the product is:

• environmental friendliness;
• high quality sound and thermal insulation;
• simple care;
• large service life.

For information! It is impossible to mount products from the tree immediately after their purchase, they should acclimatize a little. Material must "relax" about a week.

Manufacturers took care of a large selection of finishing materials for the inner and outdoor decoration at home. Finishing wooden products have a large selection of color palette, textures, forms that allows you to perform any designer solution.

Before making a choice, remember, the walls of the house occupy a large area, in contrast to the flooring. Therefore, it is very important to perform a high-quality and beautiful finish that will emphasize the style of the room and give it a special personality.

This is a board with a coarse, rough surface, which is obtained as a result of a tonon of sawing or milling. The paint for such a non-smooth surface clings better, so the la paining coating serves longer. Our warranty on such a painted finishing board is 5 years.

Technological process of painting Scandinavian boards:

Priming Aqua Primer 2907 / Teknol 3881 (brush machine)
- Application of the 1st layer of Paint Nordic Eco 3330 (brush machine)
- Application of the 2nd layer of Paint Nordic Eco 3330 (brush machine)

When painting this facade board, the initial and interlayer grinding is not performed, so the cost of such a board is cheaper than painting smooth, plane products, represented in the next section. Such a paradox is a board cheaper, and durability is higher!

Dimensions, mm.	Painting	Price per m2.
		AV / C
ProfileUYV.
21*145(135)*6000 21*145(135)*4800	Without painting	540 rub. / 290 rubles.
	Genty	740 rub. / 490 rubles.
	Painted	1190 rub. / 940 rubles.
Buy
ProfileUYS.
21*145(135)*6000 21*145(135)*4800	Without painting	540 rub. / 290 rubles.
	Genty	740 rub. / 490 rubles.
	Painted	1190 rub. / 940 rubles.
Buy
ProfileUYL.
21*145(135)*6000 21*145(135)*4800	Without painting	540 rub. / 290 rubles.
	Genty	740 rub. / 490 rubles.
	Painted	1190 rub. / 940 rubles.
Buy
ProfileUYW (Spool + Planken)
21*145(135)*6000 21*145(135)*4800	Without painting	540 rub. / 290 rubles.
	Genty	740 rub. / 490 rubles.
	Painted	1190 rub. / 940 rubles.
Buy
ProfileKosy Planken.
21*145(130)*6000 21*145(130)*4800	Without painting	540 rub. / 290 rubles.
	Genty	740 rub. / 490 rubles.
	Painted	1190 rub. / 940 rubles.
Buy
ProfileUTF (brusade imitation)
21*145(135)*6000 21*145(135)*4800	Without painting	540 rub. / 290 rubles.
	Genty	740 rub. / 490 rubles.
	Painted	1190 rub. / 940 rubles.
Buy
ProfileKm4r (straight plaque)
21*95/120/145*6000 21*95/120/145*4800	Without painting	540 rub. / 290 rubles.
	Genty	740 rub. / 490 rubles.
	Painted	1190 rub. / 940 rubles.
Buy
ProfileKm2r.
21*95/120/145*6000 21*95/120/145*4800	Without painting	540 rub. / 290 rubles.
	Genty	740 rub. / 490 rubles.
	Painted	1190 rub. / 940 rubles.
Buy
ProfileKM
21*95/120/145*6000 21*95/120/145*4800	Without painting	540 rub. / 290 rubles.
	Genty	740 rub. / 490 rubles.
	Painted	1190 rub. / 940 rubles.
Buy

This section of the price list contains products with an ideally smooth painted surface of the board, the so-called "furniture quality". Previously, such a board is definitely polished on the calibration and grinding machine, and then paint. Since in this case there are two additional operations: primary grinding and interlayer grinding, the cost of this finishing board above, rather than Scandinavian.

- Packaging through foam film and loading

For tints, sleeps (ends) boards will be provided by LKM (free)

Dimensions, mm.	Painting	Price per m2.
		AV / C
ProfileUYV.
21*145(135)*6000 21*145(135)*4800	Without painting	540 rub. / 290 rubles.
	Painted	1440 rub. / 1190 rubles.
Buy
ProfileUYS.
21*145(135)*6000 21*145(135)*4800	Without painting	540 rub. / 290 rubles.
	Painted	1440 rub. / 1190 rubles.
Buy
ProfileUYW (Spool + Planken)
21*145(135)*6000 21*145(135)*4800	Without painting	540 rub. / 290 rubles.
	Painted	1440 rub. / 1190 rubles.
Buy
ProfileKosy Planken.
21*145(130)*6000 21*145(130)*4800	Without painting	540 rub. / 290 rubles.
	Painted	1440 rub. / 1190 rubles.
Buy
ProfileUTF (brusade imitation)
21*145(135)*6000 21*145(135)*4800	Without painting	540 rub. / 290 rubles.
	Painted	1440 rub. / 1190 rubles.
28*193(185)*6000	Painted	1640 rub.
Buy
ProfileKm4r (straight plaque)
21*95/120/145*6000 21*95/120/145*4800	Without painting	540 rub. / 290 rubles.
	Painted	1440 rub. / 1190 rubles.
Buy
ProfileKm2r.
21*95/120/145*6000 21*95/120/145*4800	Without painting	540 rub. / 290 rubles.
	Painted	1440 rub. / 1190 rubles.
Buy
ProfileKM
21*95/120/145*6000 21*95/120/145*4800	Without painting	540 rub. / 290 rubles.
	Painted	1440 rub. / 1190 rubles.
Buy

The technological process of painting planing products consists of the following operations: - grinding or brash (appropriate machine)
- Priming Aqua Primer 2907 / Teknol 3881 (spraying)
- Application of the 1st layer of varnish Aquatop 2600 (ch / Mat) / Paint Nordica Eco 3330 (spraying)
- Intermediate grinding (machine, grain R 220)
- Application of the 2nd layer of varnish Aquatop 2600 (ch / Mat) / Paint Nordic Eco 3330 (spraying)
- Packaging through foam film and loading

For tints, sleeps (ends) boards will be provided by LKM (free)

Dimensions, mm.	Painting	Variety	Price per m2.
ProfileKosy Planken.
20*140(125)*4000 20*115(100)*4000	Painted	AU	1890 rub.
		A-Prima	2190 rub.
		Extra	2590 rubles.
Buy
ProfileDirect Plakenken
20*140*4000 20*120*4000 20*90*4000	Painted	AU	1890 rub.
		A-Prima	2190 rub.
		Extra	2590 rubles.
Buy
ProfileImitation Bruus
20*140(135)*4000	Painted	AU	1890 rub.
		A-Prima	2190 rub.
		Extra	2590 rubles.
Buy
ProfileTerraced deck board
28*140*4000	Painted	AU	2040 rub.
		A-Prima	2540 rub.
		Extra	2840 rub.
Buy
ProfileTerminal Platform Welvet
28*140*4000	Painted	AU	2040 rub.
		A-Prima	2540 rub.
		Extra	2840 rub.
Buy

Sales leaders in this section are the lining Clean and imitation of the bar. The clapboard calm is often cutting the ceilings, and the imitation of the bar is used for interior frame walls in the houses from the bar.

In order to stand out and implement a non-standard designer idea, we suggest you to consider other interesting profiles. For example, slanting plaquen or pinned analog UYW, as well as a UYS profile for vertical finish.

The technological process of painting planing products consists of the following operations: - grinding or brash (appropriate machine)
- Priming Aqua primer 2900 (spraying)
- Application of the 1st Layer of Wax / Lacquer / Paints Temnaks 1160 / Aqua 2550 (spraying)
- Intermediate grinding (machine, grain R 220)
- Application of the 2nd Wax / Lacquer Layer / Paints Temnaks 1160 / Aqua 2550 (Spraying)
- Packaging through foam film and loading

For tints, sleeps (ends) boards will be provided by LKM (free)

In the interiors, the use of aged board is very popular, which is obtained by layer-by-layer application of the LKM on the brashboard. Please note that the cost is simply ground board and we have the same.

Dimensions, mm.	Painting	Variety	Price per m2.
ProfileWalking Shtail
Pine-fir
15*135(130)*6000	Painted	AU	1290 rubles.
21*145(135)*6000	Painted	AU	1390 rubles.
Larch
14*138(132)*4000	Painted	AU	1640 rub.
		A-Prima	1940 rub.
		Extra	2240 rub.
Buy
ProfileImitation Bruus
Pine-fir
17*145(135)*6000	Painted	AU	1290 rubles.
21*145(135)*6000	Painted	AU	1390 rubles.
28*193(185)*6000	Painted	AU	1590 rub.
Larch
20*140(135)*4000	Painted	AU	1840 rub.
		A-Prima	2140 rub.
		Extra	2540 rub.

Facing walls with wood is popular in many modern interiors. It radically changes the atmosphere in the room on warm, homemade, cozy. In addition, the natural tree breathing that directly affects the air in the room. It has soundproof properties and has a wide selection of colors and textures.

Quality Wall Facing Board

First of all, we are interested in the absence of defects: bitch, uneven treatment, rough, scrap, cracks, etc. The board on the wall is completely in sight, the defective places are more difficult to hide furniture, as in the case of the floor. Also drawing of wood texture on the board, if visible, should be aesthetic: without dark spots, bitch.

Small, less painted wood texture looks better than coarse bright uneven circles with darkens from bitch. In general, the more uniform color of the tree than a homogeneous wall color, the striking look, and, by contrast: the more rude drawing, the most distinct.

When choosing a Eurolution for finishing walls, its quality is estimated by letters: a - lining without flaws; B - medium-quality material, bitch may be present; C - Low Quality Lining, for draft works.

For cladding of walls, the board must have a low humidity - not higher than 10-12%.

Types of wall cladding boards

The lining is the most popular, affordable and comfortable on the mount (the lining is attached to a horizontal doom, and in the emptiness between the shap and the wall it is convenient to hide the wiring or insulation) view of the facing board. May have grooves for a better junction. The material is the same in size, it weighs little, so convenient for transportation. The lining can be opened with varnish, paints. Due to the difference in the texture and small width of the board, the aesthetics of the solution is not at the height, although it is quite acceptable.

Imitation of timber - creates a feeling of presence in the house from the bar. Unlike the rectangular lining, the edges of the board, imitating the timber, are more rounded, and the board itself is wider. According to the quality, installation and properties is almost similar to the lining, but the big width increases the aesthetics of the finish. It is often used to external wall cladding. At the same time, the board treated with protective impregnations is already suitable for mounting on the street, but also is more expensive.

Planken is a variety of lining, but without connecting the "spike-groove", often happens short in length. The wood-resistant rock (pine or larch) is chosen for the manufacture of plaquen, so such a cladding is suitable for wet rooms. By installing the plaquen in the bath or sauna, it should be remembered about the thermal expansion of the tree and leave small gaps between the installation boards.

Block House - makes a lining at home like a log house. Block House is a wide board, smooth on one side and half-headed - on the other. It is so manufactured: a rectangular middle is cut out of the round barrel, and two semicircular boards of block house remain. The width is more width of the board of lining or imitation of a bar, aesthetics at a height. When choosing a board, pay special attention to the smoothness of the surface.

Parquet board - used for both sex and wall cladding. She is shorter than plankin and much wider lining. Designers use one important point of laying parquet board: the vertical location on the walls visual increases the height of the walls of the room, and the horizontal - expands it. A parquet board creates a kind of appearance, aesthetic, but an amateur. Can be opened with varnish or paint. Usually applied to cladding a small segment of the wall. May have a "spike groove" connection.

Exotic ways of wall cladding with wood

Wooden panels - can be composed of cutting boards. As a rule, used to clamp a part of the wall or one wall in the room. The panel is important to compose among themselves so that the general view is harmonious.

Wooden wallpapers are a rolon of a veneer of a natural tree, which can only be pasted on perfectly smooth walls, on the paper base of homogeneous color. At the same time, the wall acquires a drawing of the texture of the tree and its feeling when tapping. Moisture resistance is very low.

The ends of the boards - there are different in size, and have a rough texture. The wall looks like a wooden brick.

Wall panels are a panel of solid wood, usually quite large. Such panels are characterized by a high cost, as it is not easy to find a tree of such sizes and with a beautiful texture, not too comfortable in transportation. Panels often make carved, in classic style. Used in elite interiors. Such panels, by the way, can be seen in the Czech castle of deep-over-Vltava, and in other aristocratic castles whose owners were aristocrats on the nom generation and had a wonderful taste.

Unedged board - cheap, angrily, rude, but can have some kind of attractive style, for example, a hunting house. Unedged Board is uneven along the edges, it is a wide lining, treated only in a place of cutting. Because of the uneven edges, the waist is attached, which increases the consumption of the board, but its value is the lowest due to low aesthetic qualities.

With the arrangement of private houses and their scenery, very many owners prefer only to environmentally friendly material. The most popular view of the facing of the walls of the residential building is the trim of the facade by board or other products based on natural wood.

Such a choice is due not only to environmental cleanliness, but physical properties, since the tree always has a beautiful view, steadily for mechanical loads, retains heat and makes it possible to partially replace individual slats in case of damage.

The main characteristics that always play in favor of the tree are:

• high strength;
• high heat insulation;
• soundproofing;
• easy to use;
• combination with other types of materials.

Of course, the price of this natural product is an order of magnitude higher than artificial analogues, but if you are facing the walls with your own hands without attracting specialists, and using inexpensive types of wood products, then its value fully justifies.

The lining can have a comfortable mount, which significantly reduces the time when mounting.

Variety of materials

Today, building markets presents a huge number of various wood products or based on it, but the most popular are such materials as:

• lining;
• board with imitation of timber;
• block house;
• sidding panels;
• unedged board.

Lining

The lining is a wall decoration board that is often manufactured from solid wood, is distinguished by a high degree of strength, speed and ease of installation of the product on the prepared surface.

Note!
This material is easily replaced during damage, and allows designers to use various tinting substances, apply different varnishes and paints.
The main advantage of this material in its small specific weight, which makes it possible to use these finishing boards in any building conditions.

The lining is mounted on a predetermined crate, the resulting space can be filled with insulation or laying communications systems. The material has different physical properties, is made from various wood breeds and can be used both for external and interior decoration.

Barboard, imitating timber

The imitation of the bar is an outdoor decoration board, which assembles the imitation of a solid bar and gives the structure more solidity. The material also has a high degree of strength, resistant to mechanical damage and when processing with special protective agents, it acquires resistance to destroying environmental factors.

The material is similar to the lining and installation occurs on the same principle. Each board has on the longitudinal edges of the "Ship" and "groove" lock, which greatly facilitates the installation process. This finishing board under the bar is installed on a wooden crate over the insulation.

Block house

Block House is another representative of the decorative board, which is designed to imitate log houses from the perfectly smooth rounded log. The product is available with different thickness and width of the rounded circuit, which allows the product to be used both from the outer part of the house and for the inner scenery.

Such a board for the exterior finishes of the house is usually made of pine tree wood, such as spruce or Angora pine, which gives the wall greater realism and has a natural color. Also, the block house can be made from larch, aspen, cedar or birch while preserving the natural color of wood and patterns.

For your information!
The material is divided into two types ("A" and "B") by type of external text.
The material of the group "A" has a perfectly smooth surface, applicable for internal use.
The material of the group "B" has a coarsest processing, outdoor relief is close to the real veneer and is used for external decorations.

Plakenken

This is a small decorative board designed for the scenery of small architectural forms and individual sections indoors. It can also be used for exterior facades, lining individual parts of the structure for their advantageous allocation from the overall picture.

Planken is made in the form of a normal board with treated chamfer around the edges of the product. The material itself can have different color and textured solutions, chamfer can also have sharp or rounded shapes.

Of the material features, resistance to moisture can be noted, since it is manufactured mainly from larch and is saturated with a large number of natural resins. When installing plaquena, there is a small gap between the boards, since under the influence of temperatures and moisture, the plaquene has an extension property.

Wood-based siding

Which can be made of various natural and synthetic materials. In this case, we are talking about panels made of wood chips under high pressure.

Products can have different sizes, color color and texture that imitating all kinds of wood. Material has high strength, designed for outdoor use with the possibility of laying insulation, resistant to moisture and sun rays.

When buying siding, its standard package usually includes the necessary fasteners, instructions for installing the panel and additional items to hide seams and sections. Siding panels, like any other finishing board for outdoor finishing, are installed on a pre-prepared crate.

Unedged board

Unedged board is a board with untreated edges. The finishing of the walls of the unedged board gives the structure a specific style and with a good design layout, the effect is very beautiful with a pronounced personality.

Usually, this material is used to manufacture a crate for the installation of another decorative tree, but recently it began to be applied for both facades in country houses.

In most cases, the finishing of the facades of the unedged board is carried out on non-residential economic structures, garages or arbors. With a careful fit of the boards to each other, it seems that the entire structure is made of wood and this effect often use landscape designers.

In some cases, the finishing of the unedged board is made even without cleaning it from the wood bark, this is done solely for the purpose of making the structure of a unique style and a certain form. Before using this product for outdoor decoration, it is necessary to pre-process it with certain means to protect against moisture and exposure to ultraviolet rays.

Advantages of wood finish

The finish of the facades of the building with natural wood or materials on its basis has a number of significant advantages, such as:

• use in different climatic zones;
• the ability to create structural elements of any complexity;
• environmental purity and naturalness of the material;
• ease of installation, without special skills;
• long service life with the ability to repair and partial replacement;
• the ability to install additional insulating layers on the walls of the building;
• the possibility of a large reconstruction of the facade without damaging the foundation of the structure;
• relatively low cost;
• many options for color and textured solutions.

Disadvantages of wood finish

As with any other type of material, the decoration of the walls of the board has its drawbacks:

• with a large amount of moisture, there is a sharp deterioration in the physical qualities of the material;
• without special processing, the tree supports burning;
• the presence of bitch, resin pockets, cracks and other natural components of wood;
• the need for periodic maintenance and updating of protective or colorful layers;
• development of fungus without preprocessing with antiseptics.

Conclusion

High-quality wood treatment before it is directly used will allow the tree with new physical properties and avoid the manifestation of some of its shortcomings listed above. In general, the use of this natural material always plays a hand in a decorative plan, successfully combined with other types of materials, creating sensations of comfort, comfort and giving home a chic presentable look.

Be sure to watch the video in this article and find out a lot of interesting things about this topic.

The popularity of wall decoration by wood is due to the environmental friendliness of the material and its aesthetic qualities. What are the features of this material, and how beautiful to make a dwelling with a tree?

When the decoration was applied

Last time, a tree for decoration of walls in the house is still used more often. This is due to the modern desire for the use of environmentally friendly materials. In addition, the tree looks very beautifully on the walls. The use of this material is always welcome: it is suitable for the bedroom, give solidity to the cabinet or guest, concisely look in the hallway.

Some wood breeds in the process of operation are isolated aromatic oils and a specific smell. It improves the microclimate indoors and has a beneficial effect on the human body.

Advantages and disadvantages

Choosing material for finishing, it is worth considering the benefits:

1. durability;
2. reliability;
3. good sound insulation;
4. nice smell;
5. pleasant aroma;
6. material is environmentally friendly.

In addition to the advantages of this material there are disadvantages:

1. special care is needed;
2. fire hazard material;
3. high value material.

Obviously, the trim tree has much more advantages.

Which finishing materials are used for internal works

Finishing materials from wood are distinguished by their diversity, in front of the choice it is more detailed to get acquainted with each of them:

1. Lining. It is used for both external and internal works. Panels are distinguished by durability, good heat and sound insulation, durability.
2. Eurovale. It differs from the previous version of more modern manufacturing technology. It has an advanced coupling system (the probability of discrepancies of the planks decreased), special ventilation channels are provided on the planks, which prevent the formation of condensate from the reverse side of the lamellas.
3. Hussvablok. Material feature - the ability to combine different color and texture of the hewscrek panel.
4. Wooden wallpaper. Move from noble tree species, more than 100 types of wallpaper are presented on the market. The material is sold in veneer rolls, sheet thickness - 0.1-0.6.
5. Wall panels. It is made from the massif of the noble breeds of the tree: cedar, Lena, oak, alder.

What to use material for outdoor skin

No less often finishing materials from wood are used for external work. They create a beautiful and accurate type of structure, protect the walls from exposure, differ simplicity. Popular materials include:

As a rule, the impregnation of the planet is carried out by environmentally friendly compositions, but for reliability it is worth checking the certificate.

Finishing materials for an apartment: Fastening options for different room designs

Depending on the features of the interior, wooden finishing materials have their own features of the attachment. Consider the most interesting and unusual of them.

Rail

Rake - universal building material. He rarely acts as wall facing, more often the rail is used to design the ceiling. From this material even make decorative elements for the room.

To create a decor from the rail, we take cropped pieces that will not suit anywhere. The fact that they are different sized - only plus. Drag each bar in your color. When the material dry, choose the basis for it (for example, a chipboard panel).

The size of the foundation is selected individually. An exemplary ratio of length and widths 5: 1. On this basis, we are tightly lay out painted strips like a panel so that there is no free space between them. Colors distribute uniformly. We glue the planks to the base, and when everything will dry with a cling of panel on the wall.

On the walls, the slats rake are rarely attached. An interesting option is the installation of a rack on the wall with gaps between the planks. It looks impurious when the free space between the planks is painted in a dark color.

Imitation of wooden coating

There are two ways to install: combined and monolithic:

1. Combined. Different sections of the wall are made up with different materials. So you can zonate the premises or allocate details in the room. It is important that additional materials fit in style and shade to the imitation of the tree.
2. Monolithic. It provides for the finish of the entire premises (floor, ceiling, walls) is this material. The panels are mounted in such a way that there are no gaps between them and a dense monolithic surface is formed.

Facing board

With this material, you can use a variety of ways to cover with boards. The easiest - installation of boards on a metal or wooden crate. Combined Mounting Method: Combining a facing board with other finishing materials. An interesting design solution - the transition of floor boards into the wall. It looks spectacular and interesting, especially if you do a transition is not square, but semicircular (then the functionality of this site is lost).

Wall Decoration Board

Often there is a combination of painted and wall decoration with wooden board. Even old boards can be used for cladding, for example - old parquet boards. For many, the usual pattern of the Christmas tree on one of the walls or the installation in a chess order has become a truly original solution.

Such interior will look even better due to contrast, if the room will be painted in white, and the boards in black.

For interior design, you can use the balances of the boards: mount them on the wall, like panels over the entire surface. This solution is more suitable for the modern interior. It is important that the furniture and other rooms at home fit this style.

Wood cutting

Edged boards - the most economical and simple option for finishing. They are often used when placing a country style, creating the impression of some rustic romance.

Decoration and decoration of the room with wood: options and methods of trim tree in the house

The tree allows designers to reveal all its creative potential: a variety of finishing options to these materials will surprise many. We will only tell me the most interesting of them.

How to make a trim diagonal

Diagonal installation of wooden planks - real art. Many even make their planks intricate patterns, and even whole paintings, combining materials from different shades and sizes. Diagonal installation is characterized by its originality and does not require special skills. Everything happens according to the standard scheme, only the upper and bottom edge of the board must be aligned under the desired angle.

Decor with sleep with your own hands

All the walls thus make it no desirable. Woodwood is recommended to use as a separate decor element. For example, with their help you can distinguish the recreation area: to make a wall behind the sofa. To highlight the old wooden frame of a certain section of the wall, and the spaces inside the frame fill in spikes of different sizes.

If you know how to burn on the tree for this picture on each heap, you can smear the pattern.

Decorative bars in the interior

Original ways to use:

1. Instead of railing at the stairs. Bars are installed on the floor to the ceiling, fencing one of the sides of the staircase.
2. As a wall design. Initially, it is recommended to paint the wall with contrasting color, preferably dark, after which the bars are mounted to the wall with a hidden way, and the free space is left between them. Dark gaps will create an amazing effect.

For this, all bars need to cut into small squares, different widths (from 2 to 4 cm). After that, their exactly to each other is mounted on the wall in a hidden way. Different width pieces will create a relief wall.

Original scenery from the unedged board in the living room

This material will look beautiful without the use of special techniques. We simply mount the unedged boards on the wall of the Christmas tree or one to one (then there will be empty intervals).

The second interesting option is to vertically attach an unedged board with a large tree to the wall. It will look beautiful if the board of an unusual form is selected.

If you want to turn the board into a practical decor element, you can kill a couple of hooks for clothes, and you will get an unusual hanger

Facing in the bedroom

The classic option for the bedroom is a decoration with wooden panels of space from the head of the bed. Some designers specifically provide a niche wall for such design. Type of sawn timber does not matter: edged or unedged boards, lining, laminate, etc.
You can complicate this option for design and fold some pattern from the board or with the help of combining shades, lay a full-fledged picture. The opposite option is not less relevant: the head of the headboard is drawn up with wallpaper, paint, decorative plaster, and for finishing the rest of the space, materials are used from wood.

Design of sheathed walls with wood in a guest house

Guest house is an ideal place to use wooden finishes. She will give the premises of comfort, beauty and create a homely atmosphere. First of Soviets: Ceiling decoration with wood. In general, a tree can be seen entirely, creating smooth transitions from walls to the ceiling, or combining with other materials: lining with sleepwalk or unedged boards, combine bars and laminate or wooden panels.

For high-quality implementation of installation work and obtain the desired result, it is worth listening to the advice:

1. Check the quality of the material when buying.
2. Before assembling, finishing materials from wood should lie 2-3 days. The fact is that the tree gives shrinkage due to changes in humidity and air temperature. If you perform installation at once, through time the tree will take place and space will appear between the planks.
3. Between the wall and finish, it is advisable to make a gap and organize ventilation. On the reverse side of the planks can be collected condensate, which will provoke the rotting of the tree.

Coating

Any material from wood requires the right care, otherwise it will quickly lose its strength and aesthetic appearance:

Tree and lumber allow you to create a cozy and harmonious interior in any room. For technical specifications, such a finish is not inferior to other materials, and its cost even saves. The main thing is to find your design option.

Useful video