Pvc pipe ladder with hands. DIY pool ladder: drawings, materials, manufacturing instructions

When building a house or a cottage, it becomes necessary to equip a staircase. The most sturdy and durable staircases are those made on the basis of a metal frame.

Moreover, the use of metal allows you to solve the most intricate design projects - you can create unique and non-standard compositions from a profile pipe that fit the interior.

Content of the article

Types of stairs

The division of stairs into types occurs in several positions: material of manufacture, design, purpose, location (internal, external).

As a material for the manufacture of staircase structures use metal, wood and reinforced concrete mixtures. Most often, these materials are combined.

By design there are:

attachments are the simplest and most common design type. It consists of two parallel supports, to which the steps are welded at an angle of 900. They can be both stationary and portable, for example, a stepladder;
marching - have a more complex design, which involves the installation of steps on beams installed at a certain angle. Bowstrings or stringers can act as supporting elements. Such is quite within the power of the owners of a private house with their own hands;
screw - The steps are attached on one side to the support beam, and the other side is enclosed by a railing. The steps are made in the form of a triangle or sector. It is quite difficult to make such a structure on your own;

bolt stairs - in this case, the steps are attached directly to the wall using special strong bolts (bolts). The other side is connected by a railing. A prerequisite for this type of staircase is a strong wall that can withstand the load.

Advantages and disadvantages of ladders from a profile pipe

Diy ladder from a profile pipe has a lot of advantages in comparison with designs from other materials:

high strength, which is provided by the profile pipe;
long service life, one might even say that this is a staircase for centuries;
the process of making the frame has already been worked out to the smallest detail, so it will not take much time;
the use of different fasteners, you can implement any design ideas;
relatively cheap building materials for the frame.

Along with the advantages, there are some "disadvantages" of ladders from a profile pipe, which must be taken into account even before starting work.

So, a metal frame is a rather heavy structure, so lighter materials, such as plastic or glass, need to be used for auxiliary elements.

But this nuance allows you to give them a more aesthetic appearance. The second point: the use of a metal profile implies that all joints must be welded, therefore, the master must be able to use the welding machine.

Stages of making stairs from shaped pipes

The most commonly used option for making a staircase is a frame made of a shaped pipe, and the steps are made of wood. For the base, take a pipe with a diameter of about 60 cm and a corner of 40x40 cm.

Using this design as an example, we will consider the main stages of work:

At the first stage, a calculation and a drawing of the future structure are made, the number of steps is determined and the length of the stringer is calculated. The most optimal dimensions: the width of the stairs is within 80-120 cm, the height of the steps is not higher than 20 cm and not less than 12 cm, the depth is 30 cm.
Next, pipes are marked and cut, frames are made under the steps.
It is necessary to concrete the platform, which will serve as the base of the entire structure, and also keep the angle of inclination. This level is considered to be zero - the first stage will be located on it.
They carry out the installation of the profile pipe, fixing it by welding to the tabs in the concrete platform on one side, and on the other to the anchors that are built into the wall.
Angles are welded to the metal pipe, the calculation of the dimensions of which is determined at the initial stage. It should be noted that all dimensions, even if a household step-ladder is made, must be observed exactly.
When the frame is assembled, railings are welded to it (if they are metal) or fixed in another way if wood or other material is used.

How to make a ladder from a profile pipe with your own hands? (video)

Design features

In the process of making a staircase from a profile pipe, there are nuances, the knowledge of which greatly simplifies the work. So, if the railing is installed on the side of the staircase, then it is possible in this way to increase the width of the span.

When erecting a staircase, it should be borne in mind that during operation, maintenance of the structure may be necessary. For this purpose, a gap is left between the wall and the supporting structure.

So that there are no vibrations of the stairs when moving along it, the length of the racks in the spans is limited.

A fully metal staircase made of a shaped pipe is not very attractive, therefore auxiliary materials are often used, such as glass, durable plastic or polished wood. This not only lightens the construction, but also makes the appearance of the stairs more beautiful.

Step ladder

In a subsidiary farm, a side ladder is an irreplaceable thing that useful for any work at height. You can make it yourself. There are stepladders of one-sided or two-sided types. Structurally, the step-ladder looks like this - two parallel, and steps attached to them.

The calculation of the height of the ladder is done in the process of determining the interval between the base, that is, the floor, and the last step. The optimal interval between them is 20-25 cm.

According to their functional features, there are three types of ladders: classic, universal or transformer.

The frame of the universal ladders can be folding or telescopic, in which the sections are pulled out gradually, as needed. Sections are fixed by means of latches or hooks.

The folding ladder works in several positions, and in addition is compact and lightweight when assembled, which greatly simplifies transportation.

In non-collapsible ladders connections are made by welding, and transformer structures are joined using bolts. This method of connection allows you to quickly dismantle the damaged element and replace it.

Self-made, has a number of advantages, such as lightness, practicality and ease of use, and a high degree of reliability.

A ladder for a frame pool with your own hands is an excellent option for solving the problem of improving your artificial reservoir. Armed with simple materials and improvised tools, you can create an interesting and reliable structure that will become not only a safe attribute for the pool, but also a real decoration of the site.

And what only craftsmen are capable of. There would only be a desire, but even the most unrealistic idea can be realized. Take a closer look, maybe in our selection of such fantasies that have already come true, there is the very staircase to the frame pool that will conquer you.

Master class on creating a staircase made of wood

Typically, outdoor pool ladders are factory made from aluminum or austenitic alloys. Products made from these materials are light, beautiful and easy to install. Working with them on your own without special equipment will not work, and you need a special skill.

In the absence of such, you can pay attention to wood. Anyone can work with it. Ideal as material for stairs. Below is an instruction that describes in detail how to make such a simple and convenient ladder structure for a frame pool.

We start, as always, with a drawing of the future staircase in order to accurately determine the amount of materials. Measure the height of the pool and calculate the parameters of the future structure. The photo below shows our drawings with all dimensions.

Attention! If possible, you can design a staircase in a computer program.

Knowing all the dimensions, you can make simple calculations and purchase a certain footage of the main material.

For our design, you will need boards measuring 100x50 mm of various lengths in the amount of:

2 pcs. 450 mm long;
2 pcs. 1245 mm long;
2 pcs. 1422 mm long;
4 things. 1016 mm long;
2 pcs. 1346 mm long.

Sawing boards 100x25 mm. - 13 pcs. length 1194 mm. You will also need 6 bars measuring 250x50 mm and 1232 mm long.

In addition to the main material, you need:

wood screws;
screwdriver;
jigsaw for cutting;
a sander for wood to remove irregularities;
dye;
varnish.

Attention! To make it more comfortable to walk up the steps, they can be sheathed with soft material, for example, carpet. In this case, you will additionally need a furniture stapler with staples, and pieces of carpet of the required size with an allowance on all sides of 5-7 cm for hem.

When all the materials are collected, and the boards are sawn to size, you can proceed directly to the assembly, which will take no more than two hours.

As a result, you get such a ladder that you can paint, varnish and use with pleasure.

Videos in this article:

How to equip a recreation area with a ladder around a frame pool

For those who want more, and who are not attracted by simple ladders for prefabricated frame pools, we suggest considering our small photo report as a guide to action. Namely, the transformation of an ordinary frame pool into a chic relaxation area.

To equip it, you also need to measure your pool from all sides, and enter its dimensions on an impromptu drawing. Taking into account the area of the site, we "build" the site on the drawing around the pool.

Don't forget about the dimensions. Using the resulting instructions, we find out how much wood is required. In addition to it, sheet insulation is also needed, and consumables for assembling the structure.

Stage 1. We securely isolate the pool from the outside.

Stage 2. We make a frame according to the drawing from a bar. It is important that the supporting elements are spaced about 30 cm apart from each other. We leave space for the ladder, which can be assembled according to the above instructions.

Stage 3. We sheathe the resulting frame with boards. Note how this is done in the photo. The boards are staggered. So the cladding is not only better quality, but also more interesting.

Stage 4. We enjoy the result!

Pool ladder in an hour from the remains of plastic pipes

To make such a simple and convenient pool ladder, no special materials are needed. At the same time, the price for it will be penny, especially if you have lost the remnants of plastic pipes and various fittings to them in your bins.

If the ladder for the frame pool with your own hands made of plastic pipes is a success, then you can make it into such an interesting and simple cocktail stand with a glass top.

DIY pool ladder depends on the volume, design of the bowl and your capabilities.

You can install a ladder for the pool with your own hands, as well as for permanent ones. What is the best way to make a staircase?Let's consider each option separately, their pros and cons.

ADVICE!The most suitable place to install a ladder is the most illuminated. The bright spot makes it easy to climb and descend the slippery steps.

Make the pool ladder possible from different materials:

stone,
concrete,
wooden,
metal,
plastic.

Stone staircase

Stationary and usually laid on the outside of the pool bowl, the stone staircase looks very beautiful and will decorate any pool. But if you build a stone staircase inside the bowl, then over time pool steps will be covered with bloom, will slip and pose a danger to vacationers.

ADVICE!To ensure safety, handrails made of stainless steel or aluminum must be installed on the sides, and the steps themselves are finished with plates with anti-slip notches.

Concrete stairs

Since it is covered with finishing materials suitable for finishing steps. It has an anti-slip surface, a wide step ledge and can serve not only as a descent, but also as a place to rest. The downside is that often the concrete structure takes up a lot of space and is not suitable for small pools.

ADVICE!Approximate proportions for concrete mix: proportions of concrete M20 1 × 2.8 × 4.8 (cement, sand, crushed stone.). Water is added based on the specific situation.

Wooden ladder

As well as a stone one, it is often built for the protruding sides of the pool from the outside. But there are exceptions if the wood is coated with a special varnish for floating ships. In this case, the tree is able to withstand constant exposure to water and not rot. Unlike the stone one, the wooden one is portable and can be removed at unwanted times.

ADVICE!To reduce the effect of water on wood, it is best to treat the structure with special impregnations that prevent decay, or water-repellent paint.

Metal ladder

For both large and small pools. Pool ladder installation can be attached to the bowl, or can be mounted. They are made of alloy steel and black steel and have anti-corrosion properties. This ladder is easy to maintain and affordable.

IMPORTANT!During operation, low-quality metal will begin to rust. Before buying, you need to familiarize yourself with its composition. The more nickel is in the composition, the more reliable and durable the metal is.

Plastic steps

The easiest and cheapest option. This is the stepladder commonly used for frame pools. There is an option to assemble a ladder from polypropylene pipes with your own hands. A similar ladder can also be installed in any recessed bowl. Its disadvantage is the instability of the structure and is not intended for people with large weight.

Types of ladder structures

Roman are divided into stationary and attached.

Stationary ladders are laid immediately when the pool is poured. They can have a different appearance, but the size according to GOST must be observed. Namely, the angle of inclination should not exceed 30-45 degrees. Or the stairs will be too steep and traumatic. And width steps for stairs to the pool should be the size of an adult's foot or wider. If this is a design for a children's pool, then ideally the width should correspond to the size of the child's foot. Roman side steps are ready-made steps with or without railings, which are easy and simple to install in the pool bowl.

A Roman staircase is the best option for a fixed pool without sides. Its steps are often rounded, and the descent into the water is smooth and pleasant. You can also use a metal ladder that only has steps on one side. It is attached to the board.

Metal attachments have a wide selection in the market.

They represent all kinds of designs with a pair or several steps, depending on the depth of the pool. They have various types of attachment to the sides, wall and floor of the bowl. For flanges and embedded parts. A more reliable option is the installation of a chrome ladder even during the finishing of the pool.

Stepladder stairs

They can be plastic and metal, stationary and portable. Naturally, the advantage of a stationary metal ladder is on the face. But it is desirable that it was an indoor pool, since despite the anti-corrosion weather conditions, over time, the stairs will look obscene. As for plastic, this is a lightweight prefabricated structure made of plastic pipes, it can be easily assembled with your own hands during the operation of the frame pool. These stairs are double-sided, which is another plus.

Making stone steps

Since a staircase made of stone is installed as a rise to the pool bowl, there should be no problems with its installation. The main thing is to have a bottle or pebble at hand. For pebbles, it is advisable to make a shape from a reinforced mesh. The stones are stacked on top of each other, so that they take shape steps for the stairs to the pool ... And they are attached to each other using cement mortar.

Making concrete steps

The concrete staircase is assembled after the complete fabrication of the pool bowl. The shape of the future staircase is created using metal fittings and plywood. She easily bends to take the required form. You can put together the formwork for the future stairs from the boards. After the construction of the frame, the form is poured. To prevent cracking of concrete in the heat, it is watered daily with water until the material is completely dry.

Making steps from wood

DIY wooden ladder for the pool represents a stepladder. It is made of 60x40 beams and sturdy planks of solid wood for steps and an upper platform for easy entry into the water. The main task of such a ladder is stability and mobility. The steps are fixed in the grooves of the bars, and are fixed with metal rods for reliability. The wooden stairs are well sanded so that the wood becomes smooth and covered with wood stain and varnish. To minimize the impact of water on the material, it is advisable to lay rubberized mats on the steps.

Making steps from metal

There are a lot of options for chrome-plated stairs, both in external design and in functionality, you can buy ready-made ones. And you can do it yourself with the help of a welding machine and metal. Choose a suitable drawing, measure the parts and weld to each other. Parts can also be fastened with galvanized bolts. Typically, such a ladder looks like a stepladder. The metal is treated with anti-corrosion agents. The steps are covered with anti-slip material. A rubber pad is put on each leg of the metal ladder to prevent damage to the bowl lining. Such a ladder will be reliable and will be able to withstand heavy loads.

The minimum cost of a ladder for a stainless steel pool is 5,000 rubles.

Making steps from plastic

The simplest option, which is bought ready-made and assembled according to the instructions.

The minimum cost of a ladder for a plastic pool is 1 800 rubles.

Output

Whichever ladder you choose, it must be reliable and safe in the first place. Such a ladder will be convenient and pleasant to use for more than one year. Even if it is stationary. By the way, a portable wooden or metal ladder, in winter, can serve as an excellent stand for flowers in the winter garden!

Practical PVC pipe crafts for home and garden.

A lot of things can be made from PVC pipes, including independently, with due attention and diligence. What exactly it can be, you can see in the new review. Surely, many of these gizmos can be used in your summer cottage.

1. Curtain rod

Stylish cornice made of water pipes.

Excess pipe pieces left over after repairing the plumbing can be used to create an original and practical curtain rod. It is worth noting that both plastic and metal pipes are suitable for the manufacture of cornices. The main thing is to correctly assess the weight of the curtains, as the plastic cornice is unlikely to withstand the weight of heavy curtains.
2. Laptop stand

Bright laptop stand.

Unwanted pieces of PVC pipe can be used to create an original laptop stand that protects it from overheating. And so that the stand is pleasing to the eye and does not look dull, it can be painted in any bright color using spray paint.
3. Shelf for shoes

Shelf organizer for shoes.

Large diameter pipes are perfect for creating a practical and stylish shoe organizer. And in order for the product to look attractive, the pipes must first be painted or decorated with wallpaper.
4. Organizer for laundry

Practical lingerie organizer.

Small pieces of medium diameter PVC pipe can be used to create a practical organizer for socks, tights, briefs and scarves in a drawer.
5. Support for plants

Support for climbing plants.

Thin pipes are perfect for making a simple support for climbing plants in the country.
6. Stands

Stands for hair dryer and flatware.

7. Pencil cases

Stands for hair dryer and flatware.

Plastic pipes and their accessories can be used to create various coasters for hair dryers, hair curlers and curling irons.
7. Pencil cases

Household rack.

A functional plastic pipe rack is a budget idea for organizing storage in a garage or closet.
9. Fixtures

Refined lamps made of pipes.

Creative individuals can try and make unique and very effective lamps from PVC pipes. To do this, pipes can be painted, decorated with curly cutouts, sequins and any other materials, and a base with a light bulb can be inserted.
10. Decorative partition

Decorative partition made of water pipes.

Talented and creative individuals can use water pipe cuttings to make an exquisite decorative partition.
11. Hose holder

Garden hose holder.

To keep the long garden hose from getting tangled under your feet, you can make a simple and practical plastic pipe stand for it.
12. Bicycle carrier

attachment for a bicycle on a car.

From unnecessary PVC pipe, you can make a convenient mount for a bicycle on the trunk of your own car.
13. Bed sideboard

PVC pipe collar.

To prevent a child or elderly person from accidentally falling out of bed, equip its edges with simple bumpers made of plastic pipes.
14. Security gate

Security gates made of PVC pipes.

Low gates can be made of PVC pipes, which will not allow the child to leave the safe area for him and get into the kitchen or stairs.
15. Glass holder

Glass holder made of plastic tube.

A piece of PVC pipe can be turned into an original glass holder. To do this, make a narrow cut along the pipe and attach it to the bottom of the kitchen cabinet or to the wall.
16. Cutlery stand

Charming cutlery rack.

The scraps of PVC pipes left over from the bathroom renovation can be used to create an original stand for spoons, forks and knives.
Video bonus:

Wonderful flower vases.

From the remnants of PVC pipes, very original flower vases are obtained, which can be decorated with the help of original painting, applique or decoupage.
18. Hanger

Hanger in the hallway.

PVC pipes and their accessories, painted in any color, can be used to create an original and practical hanger for the hallway.
19. Bird feeders

Bird feeders.

People who keep chickens, geese, or ducks will love the idea of making feeders and drinkers out of wide plastic pipes.
20. Clothes rack

An original clothes hanger.

Thin PVC pipes can be used to create a trendy floor hanger, a must-have for an open wardrobe.
Video bonus: