What kind of corrugated board is needed for the fence. Which corrugated board for the fence is better and how to choose it? The shape and thickness of different types of corrugated board for the fence
The construction of fences is a responsible and time-consuming process, but the fence should not only be stable and reliable. A solid, well-built hedge is fashionable and beautiful. In addition, a good fence not only marks the perimeter of the site, but also protects it from wind loads and prying eyes. For the construction of fences, corrugated board, which is a sheet of metal with longitudinal profiling, is increasingly being chosen. In order to get a high-quality and solid fencing, it is important to choose the right size of the corrugated sheet for the fence, its coating and brand, the material must be resistant to atmospheric, mechanical stress. In addition, it is very important to correctly mount the corrugated fence.
Source yandex.ruWhat is a professional sheet
Profiled sheeting is large sheets of various thicknesses, produced by the manufacturer from bent iron without heating on machines - in a cold way. On the surface of each sheet there are stiffening ribs - waves. They are obtained after being rolled on equipment, their height and shape depend on the purpose and type of building material.
A professional sheet made according to all standards has several layers:
low alloy steel base;
zinc layer;
anti-corrosion treatment;
primer;
decorative coating with a colored polymer consisting of a mixture of synthetic resins and plastic.
An alternative to the polymer layer is plastisol coating. Such products are characterized by maximum resistance to external influences, but have a high cost.
The anti-corrosion resistance of the material is proportional to the size of the zinc coating layer. Zinc is applied hot or cold, application density 100-300 g per 1 m² of steel sheet. The maximum application of the zinc layer significantly improves the consumer quality of the product.
Advantages and disadvantages of corrugated board
The main advantages of metal-profile sheets for the construction of fences include:
Affordable price. Installing a large fence does not require a lot of money.
The surface of the sheet has protective cover e, which prevents corrosion, fading.
Long lasting life time- up to 50 years.
Sheet surface easy to clean from pollution. If damage occurs to the coating, it can be cleaned and the area covered with a new compound.
Range the profiled sheet is wide, you can buy products of different colors, textures.
Metal sheets easy to combine with other materials: stone, brick, cellular polycarbonate.
Lightweight and fast mounting.
Final high strength andreliability fencing.
The disadvantage is the impossibility of installation using welding, since the outer coating of the sheet is damaged when exposed to too high temperatures.
What brands and varieties of corrugated board for hedges exist
The fence profile is offered in several types and brands, which differ both in composition and characteristics, and in price.
When installed in confined areas where wind load is minimal, products with maximum flexural strength may not be used. In an open area, the hedge forms a solid barrier to the winds, therefore maximum strength is required.
In the designation of the marking of the corrugated board, the letter is indicated: C, H, HC.
H - bearing material used in the creation of floors and roofs;
C - wall profiled sheet, suitable for the construction of fences and walls of outbuildings;
NS is a versatile material that finds its application in any type of construction, including the assembly of enclosing structures.
For the installation of fences, material marked "C" is used. It is produced specifically for fences, partitions, walls and differs from the "H" sheets in the height of the wave. Products with large waves can withstand maximum loads. In some cases, it is allowed to use products marked "HC", which have a universal purpose.
Following the letters are numbers, by which the consumer can understand the height of the wave, the width of the product and its thickness. For example, if on the tag attached to the corrugated board there is such a combination "C 20-1120-0.6", it means that a wall sample with a section / wave height of 20 mm is in front of the buyer. The useful area of the sheet is 1120 mm. The thickness is only 0.6 mm.
Markings and colors of corrugated board for a fence Source es.decorexpro.com
Differences in marking sheets
There are several of the most popular types of corrugated board for the construction of fences.
C-8. The sheet belongs to the budget variety, has a low specific weight, and is inexpensive.
Wave height - 8 mm.
The distance of the ribs is 6.25 cm.
Useful sheet width 115 cm with a total width of 120 cm.
This type of corrugated board is suitable for the installation of low fences. If, when installing the fence, make large spans, the surface may be damaged from impacts and wind loads.
C-10. It has a rectangular relief 10 mm high, which provides sufficient strength with low weight, the width of the step between the ribs is 4.5 cm. The working width is 110 cm with a total width of 115.5 cm. The sheet thickness is 0.4-0.8 mm. The material has an optimal ratio of price and quality, withstands loads and does not undergo accidental deformation. Suitable for any type of fencing.
Profile sheet for a fence marked C-10 Source festima.ru
C-14. The most suitable type of sheet for mounting fences in areas of high wind loads.
The waveform is trapezoidal, its height is 14 mm.
The distance of the stiffeners is 6.5 cm.
The useful width of the profiled sheet for the fence is 106.5 cm with a total width of 113.5 cm.
The sheets are suitable for straight and complex fences and gates.
C-15. Universal products that are used for fences, roofs, walls. A distinctive feature of this species is its wide rib.
The usable width is 115 cm with a total width of 118 cm.
Wave width - 11.4 cm.
Wave depth 15 mm.
C-18, C-20, C-21 are among the most durable models. They are suitable for the installation of fences in difficult operating conditions. The appearance of the products is almost identical, the only difference is in the wave height. For fences with a height of more than 250 cm, it is recommended to use only sheets of the C-21 brand.
Profile sheet for a fence marked C-21
On our website you can find contacts of construction companies that offer the service of building fences and barriers. You can communicate directly with representatives by visiting the Low-Rise Country exhibition of houses.
A sheet with a rib height of 3.5 cm and a useful width of 100 cm.
Sheet thickness 0.7-0.9 mm.
The distance of the ribs is 7 cm.
There are grooves on the outer and inner edges of the sheet for fixing to the permanent formwork.
Requirements for the quality of galvanized steel sheet products, parameters of finished products are presented in GOST 24045-2010.
Fencing a large perimeter will require more sheets with a high wave, so it is necessary to realistically assess the need to use reinforced corrugated board. Installation of sheets is carried out with an overlap, the correct calculation will allow you to implement a minimum overlap in one wave.
Video description
How to choose the right corrugated board for the fence, look at the video:
In what colors is the corrugated board for the fence presented?
Its properties do not depend on the color in which the profiled sheet is painted. The choice is influenced only by the general architectural style of the courtyard and your personal preferences.
Despite the large number of different manufacturers of corrugated board, the colors of the products do not differ. Manufacturers use a single Rаl table to indicate colors. The exception is the Finnish Ruukki plant, which uses the RR color chart.
The most popular shades are green, brown, rotten cherry, light green. Modern products with Printech coating, imitating the texture of wood, brick, stone, are gaining popularity. Such a fence in combination with stone or brick pillars, forged inserts looks expensive and respectable.
Regardless of the chosen color, under the influence of UV rays, the surface of the corrugated board burns out in the sun. On a light-colored fence, the hue change is less noticeable.
The matte sheets used for the installation of the fence look stylish, but require regular cleaning of dirt. On such products, dust and rain splashes leave traces, dirt reduces the service life of the polymer layer. The glossy surface retains its attractive appearance longer; dirt and moisture simply roll off from it.
What is the best protective covering of the profiled sheet for the fence
The steel sheets at the base of the corrugated board are coated with various compounds. The performance characteristics of the finished product depend on the type and quality of the coating. The main types of protective coverings for profiled sheets include four varieties.
Zinc treatment. It is the least durable, inexpensive option that is not suitable for fencing private houses, shopping centers, parks. The density of zinc deposition on the sheet is 275 g / m2. sq., layer thickness not less than 90 microns. Such material is used, as a rule, for temporary structures around construction sites, warehouses. The strength and durability of the products is good, but the appearance is unattractive, and the service life is no more than five years.
Aluzinc treatment. The composition contains 55% aluminum and 45% zinc. The coating is more durable than zinc, the color is matt silver. The appearance of the products is presentable, they can be additionally painted in any color. Such sheets are most often used for industrial fences, but their maximum life is ten years.
Polyester processing. The material is highly resistant to weathering, chemical inertness. The layer thickness is 20 microns, the surface is matte or glossy. The sheets get dirty a little, polyester has a dirt-repellent effect. Dust and splashes are easily washed off with water. The range of colors for finished products is quite wide.
Treatment with plastisol or pural. Materials are characterized by maximum resistance to external influences, but finished products with such a coating are expensive. The thickness of the pural layer is 50 microns, of plastisol - 200 microns. But taking into account the service life of the sheets of about 50 years, the cost of installing the fence is comparable to inexpensive structures.
The type of covering of the profiled sheet is chosen based on the required service life and financial capabilities.
Video description
What determines the cost of a profile sheet, see the video:
The main parameters of the profiled sheet for the fence
Installation of profiled sheets can be carried out both vertically and horizontally, the strength of the structure does not change from this. The main indicator that determines the reliability of a fence made of corrugated board is the height of the wave, at its low values the wind load on the sheet is maximum, a high wave allows it to withstand heavy loads. If you need a strong, stable fence, then it must be installed on the foundation.
When choosing which corrugated board is better for the fence, it should be borne in mind that all its types are made from sheets with a width of 125 cm. To obtain waves, the sheets are cold rolled on special equipment, at the maximum wave height, the width of the finished sheet is minimal.
Most often, the profile for the fence is chosen with a wave height of 8, 10, 21 mm. The latter indicators will provide greater structural rigidity.
It is only important to correctly install the supports, not forgetting that a fence made of corrugated board differs from other types by a very large windage. If for a picket fence or forged spans, the pillars can simply be buried and reinforced with stone backfill, then they must be buried under the corrugated board to a depth greater than the freezing of the soil and concreted.
It should not be overlooked that a fence made of corrugated board is a single monolithic structure and damage to one of its parts can lead to deformation of the neighboring ones. When assembling a fence made of corrugated board, expect that it will stand for many years, so do not plant trees with a large height and trunk thickness close to it - as they grow, they can damage the corrugated sheet. It is better to plant shrubs along the fence or leave a strip of lawn about a meter wide.
How to calculate material
To determine the amount of material required and the cost of the fence, you need to make calculations in advance.
The perimeter of the fence is being measured. When constructing a gate, their width is taken away from the common perimeter.
The resulting value must be divided by the working width of one sheet of the selected brand. If the value is fractional, then it must be rounded up to a larger integer.
When purchasing material, it is recommended to provide one spare sheet in case of damage to the element during installation.
If the working width is not known in advance, then the total width of the sheet is measured. The resulting value is reduced by the width of two waves, taking into account the overlapping installation.
Online fence calculator
To find out the approximate cost of a corrugated board fence, use the following calculator:
How to determine the parameters of the fence
Before buying corrugated board for a fence, it is necessary to determine the dimensions of the future hedge. Structurally, such a fence consists of sheathing, pillars, transverse pipes and fasteners.
Taking into account the average human height of 175-185 cm, the height of the sheet should exceed it by 15-20 cm.The minimum recommended height of the fence is 2 m.In some cases, fences of 2.5 m or 3 m are mounted.This fence will completely hide the courtyard from prying eyes and maximally protect from the wind. Sheets with a height of 3 m are usually made to order.
If the purpose of the fence is to designate the boundaries of the allotment, there are no close neighbors or there is no need to fence off them with a solid fence, choose a professional sheet with a height of 1.8 m.
The span width is 2.5-3 m, which allows the pillars to be used rationally. To calculate the number of posts, the perimeter of the fence is divided by the span width. 3 more pillars are added to the installation of the gate.
When calculating the required height of the pillars, the height of the fence and the fact that they go deeper into the ground by 100-150 cm are taken into account. The height of the corrugated board for the fence is determined by the operating conditions.
The calculation of the number of transverse pipes used to fix the fence is based on the perimeter of the fence. When installing sheets with a height of 2 m, 2 rows of transverse pipes are required.
The amount of fasteners is calculated based on the standard of 4-8 elements per 1 m² of hedge.
Quality depending on the thickness of the steel sheet at the base of the corrugated board
The thickness of the steel base of a product determines its strength and ability to withstand loads. If the base is less than 0.45 mm, then the fence will not withstand the pressure of the wind and will break through at the attachment points with self-tapping screws. Such products are not suitable for long-term operation. It is very difficult to check the thickness of the base in real conditions, therefore, the responsibility for the quality rests entirely with the manufacturer's honesty.
To obtain reliable structures, it is recommended to choose a base of 0.5-1 mm. If it is possible to construct a strong frame, then use sheets with a thickness of 0.45 mm. Taking into account the deviations permissible by GOST +/- 0.6 mm, the actual thickness of the corrugated sheet for the fence can be 0.39 mm.
The best quality is obtained from sheets made on the basis of European material. Foreign manufacturers strictly adhere to the regulated thickness, use high-quality coatings. It is not recommended to purchase the cheapest material of unknown origin or made in China. Such products serve little.
Video description
For examples of beautiful corrugated fences, see the video:
The fence performs not only protective functions, but also fits into the architecture of the building. For maximum decorativeness of the courtyard, use sheets painted on both sides. Their texture and color should be in harmony with the material from which the main structure was built. The coating is chosen without scratches, chips, the surface of the sheet is even without dents. Such products will last longer.
The parameters and thickness of the sheet are selected according to the planned load. Deviations from the basic parameters in accordance with GOST should not be large, otherwise substandard goods are offered. The edges of the flooring must be even and not serrated.
The important point is the geometry of the waves. When overlapping, the sheets must match exactly. With a loose fit, the structure will turn out to be fragile and will require additional lags, which leads to increased costs.
To increase the safety of products during transportation, choose sheets with a protective film. After installation, it is removed. The guarantee of high quality is the availability of the manufacturer's warranty, all the necessary certificates of conformity.
Examples of finished corrugated fences in the photo
Conclusion
The use of corrugated board for the device of the fence allows you to get a reliable structure in the shortest possible time. When choosing products, the savings should be reasonable and, in general, it is better to entrust the selection to a professional. And in order not to waste your time and effort on the construction of a fence made of corrugated board, such work can also be entrusted to specialists. As a result, you will receive a high-quality fence, taking into account all your wishes, which will serve for many years without requiring repair.
Metal sheets as a sectional material in combination with reliable supports are a durable and strong fence for any suburban area or country house. But such a result can only be guaranteed if you choose a good corrugated board for the fence. To do this, you need to understand its types, labeling, quality criteria.
In this article, we will show you the main points of a competent purchase, we will give a brief description of each type of material.
Users often search:
The raw material for such fences is thin sheet steel, which is rolled on roll forming equipment. As a result, a smooth sheet takes on a wavy (corrugated) shape. The main function of these waves is to increase the bearing capacity and strength of the material.
Therefore, if you need to choose a profiled sheet for a reliable fence, you should look at the size of the waves: the larger they are, the higher the resistance of the material to mechanical stress.
For the manufacture of corrugated board, two types of raw materials are used:
- Galvanized. A zinc layer with a thickness of 90 microns is applied to the steel, with a density of 275 g per 1 sq. m. Often the manufacturer's warranty does not exceed 5 years, but in practice such a fence can last up to 10 years. The short term is due to the volatility of the coating - zinc erodes over time, which makes the steel vulnerable to weathering. Unpainted sheets can be used for temporary fence sections as they don't look very attractive.
- Galvanized... Components: 55% aluminum, 45% zinc, 1.6% silicon. Much more resistant to the influence of precipitation, increased moisture, therefore, the warranty period exceeds 10 years.
It is worth noting that, although dyed products will cost more, they will look more attractive.
Related articles:
Brands of corrugated board suitable for a fence, their characteristics
Corrugated board stamps are deciphered as follows:
- H - load-bearing, recommended for roofs;
- C - wall, purchased for the construction of fences, cladding of facades of houses, outbuildings;
- NS - universal, you can choose for any construction, it is also suitable for the fence.
The abbreviation of the brand is followed by numbers indicating the height of the profile, the width of the sheet, and the thickness of the steel. These are the key indicators when choosing a material for a future fence.
Photo: designation of a profile sheet Let's look at commonly used options for creating a sturdy fence.
C8
Considered an entry-level and cheap material. Profile height - 8 mm. Used for wall cladding, decorative, temporary fences in regions where the wind is not strong.
C10
This grade of sheets is also inexpensive, but with a greater steel thickness. The profile height is 10 mm. You can choose any color. Do not use to install fences with a height of more than 1.5‒2 m.
C14, C15
Thick steel material. Profile height - 14 and 15 mm. If the site is subject to strong wind loads, then such a corrugated board will be a good solution.
S20 (MP20)
The generally accepted marking of C20 sheets, but the designation MP20 is also found. This is the same material. It's just that the latter was produced at the Metal Profile plant, hence the abbreviation. The working height of the profile is 18 mm. It differs from other brands in different sizes of trapezoids on both sides. The service life reaches 35 years.
Photo: the dimensions of the profiled sheet C20 C20 is considered universal, since it is applicable for both external and internal work (fences, roofs, walls, facades).
Suitable for regions with difficult climatic conditions. Manufacturers began to supply it in three versions: A, B, R. The first two are good wind resistance. The latter copes better with static loads, which is why it is better suited for roof construction.
C21
Optimal material for sloped hedges. Profile height - 21 mm. The high strength of the profiled sheets allows you to build a reliable fence both for a country house and for industrial production.
How to choose the required thickness of corrugated board
This characteristic affects the durability and stability of the entire structure.
Before buying, you should measure the material or ask the seller for documents that indicate the parameters of the sheets.
Which coverage is more reliable
There are many types of protective covering for corrugated board. All of them provide stability to the material:
- to corrosion;
- atmospheric precipitation;
- temperature differences;
- ultraviolet (the color does not fade in the sun).
Photo: types of protective coverings of the profiled sheet The cheapest rolled metal, which the manufacturers decided to simply galvanize, has a shiny metal shade, but this material is not suitable for everyone.
A wide selection of colors is presented with a polymer-coated profiled sheet, which makes it more popular than the rest.
Separately, it should be said about the double-sided corrugated board, which is equally beautiful both from the front and from the inside.
Color spectrum
Presented in different colors. Most manufacturers use the Ral table, so products from different companies are available in the same palette.
Photo: material color palette The greatest demand is for the material made using the Printech technology, which perfectly imitates natural stone, brick, wood, clay. You can also choose a glossy or matte finish.
In addition, many companies began to make euro shtaketnik from corrugated board. The top of the edge of the sheets is specially sharpened in order to externally bring it closer to the classic wooden hedge.
Calculation of the number of sheets per fence
To find out how much material is needed for the sections, it is necessary to divide the total length of the fence by the width of the profiled sheet. If the result is required in square meters, then the resulting number is multiplied by the width and length of one sheet.
It is important to understand that there are two widths: general and mounting (working). Moreover, the second type is less than the first, because the installation of the corrugated board is overlapped.
Fence installation diagram Popular foreign and domestic manufacturers
Consider the most reliable manufacturers according to the majority of consumers.
RUUKKI
Finnish building materials manufacturer. One of the areas of work is the production of corrugated board. Has offices in many countries. The quality of the products justifies its high cost.
ArcelorMittal
Founded in 1976 in the city of Luxembourg. One of the largest steel and related materials companies in the world. It has several representative offices in European countries. There is a research laboratory where scientists are working to improve the technical characteristics of the material.
Emimar
The company is located in Latvia. It was founded back in 2007.
Specializes in the release of:
- sandwich panels;
- siding;
- roof hatches;
- corrugated board and other building materials.
Photo: profiled sheet samples It also manufactures products according to individual orders.
Metal Profile
The Russian company is the leader in the domestic production of steel products. Has been working for over 18 years. There are representations and workshops in Belarus, Kazakhstan. Produces corrugated board from C8 to H114. Product prices are lower than those of foreign companies.
Steel-Plass
The production line was launched in 1997. Works both with large wholesale buyers, construction companies and individuals. Makes profiled sheets of grades from C8 to H158. Offers a large selection of protective coatings, colors.
Profmetal
Russian manufacturer. The main direction is the production of corrugated board. The production is carried out on modern Polish equipment. The lineup is from C8 to H114.
When choosing the thickness of the product, the number is indicated on the marking without taking into account the protective layer. The optimal indicator is from 0.5 mm.
In addition, it is worth considering the following:
- At the edges of the sheets there should be no irregularities, roughness, dents.
- The color of the entire batch and the thickness must be the same.
- Deviations in width and length of the material more than allowed by GOST 19904-90 are excluded.
- You should not buy corrugated board, on the surface of which there is paint swelling, scratches, even if the price for it is significantly reduced.
- The sheet should be cut evenly and smoothly.
- The wave on one sheet should ideally overlap the wave on the previous one.
- It is better if the purchased material is wrapped in plastic, so you will save it from unnecessary scratches during transportation.
At the final stage of the purchase, the seller is obliged to issue a warranty card and a receipt.
What other components will be needed
In addition to the sectional material for the fence, you need to select the raw materials for the pillars, determine whether the foundation needs to be poured. The key factor here is the type of soil.
If you have a normal, not heaving soil on your site, then it will be enough to fill every metal support pointwise. Profile pipes 60 * 40 mm are used as racks. You need to strengthen the frame with lags. They will be pipes with a cross section of 40 * 20 mm. For 1 section, 2-3 lags are enough. Average consumption of self-tapping screws per 1 sq. m - from 5 to 7 pieces.
Photo: end strips for corrugated board For decorative purposes, a bar in the shape of the letter P is attached to the mounted fence on top of the sheets.
When choosing a corrugated board for the construction of a fence, it is important to take into account not only its appearance, but also the climatic conditions of the region, the possible load, the purpose of the fence. It will not be superfluous to understand the marking, the requirements for the quality of the material.
Before deciding what kind of corrugated board is needed for the fence, the following factors should be taken into account:
- location of the site;
- tasks assigned to the fence.
When the question of which corrugated board use for the fence, the size (namely the length of the sheet) matters.
Fence made of profiled sheet with pillars of stone
If the backyard territory is internal, that is, it is surrounded by other areas of a garden partnership or a cottage village, its fence experiences less wind loads.
A low fence will allow you to demonstrate to others the latest achievements in the field of agriculture and landscape design. But at the same time, a fashion show in bathing suits on a hot summer day will become available to the eyes of neighbors.
Extreme, detached or areas bordering highways need increased protection from wind, sand, and debris. A high fence is more suitable for those who live according to the principle “my home is my fortress”. In addition, it is a good soundproofing barrier.
When using metal of excess thickness, the corrugated board for the fence will require unreasonably high financial costs: both for the sheets themselves and for reinforced supporting structures.
Taking measurements
Wall sheeting with a corrugation height of 8 to 20 mm can be called optimal for arranging fences. The thickness of the metal in such products starts at 0.4 mm.
Instances available on the market with a thickness of 0.35 mm or less are not able to withstand serious wind loads and are often made from low-quality raw materials. Practice shows: use corrugated board similar quality for the fence is just to throw money down the drain.
Solid fence made of corrugated board“Metal thickness” and “corrugation height” are the parameters by which we select the material of the required characteristics: strength, weight, cost.
There are also indirect signs that, without measuring instruments, make it possible to understand what kind of corrugated board is needed to you for the fence dreams, and which one is better to bypass:
- flat surface without dents;
- stability of the overall dimensions of the sheets;
- uniformity of the shade of the front coating and the absence of any damage on it (scratches, chips, abrasions);
- neat cuts without chipping and burrs.
It is quite problematic to fully make sure of the worthy quality of the professional sheet on your own. To do this, you need to arm yourself with special devices that allow you to estimate the thickness of the metal and paintwork (micrometer, thickness gauge), and measure the parameters of sheets arbitrarily taken from several packages over their entire area. But even this will not allow us to establish the true quality of the metal hidden under the finishing polymer layer.
When solving the problem of which corrugated board to choose for the fence, you must certainly remember about the aesthetic component. After all, a modern fence is not only a fence, but also a decoration of the site.
A little about the finish coat
If the protective properties of the fence mainly depend on the metal used (its quality, thickness, shape), then the protection of the very thin sheet steel from corrosion processes is assigned to the polymer coating.
Which corrugated board is better use for the fence depending on the type of polymer coating? There are several guidelines to follow here.
- Polyester as a topcoat is suitable for fences that do not experience severe mechanical stress and are located in areas with low corrosiveness of the environment.
- It is better to give preference to coatings of increased resistance to mechanical stress when choosing a corrugated board for a fence exposed to stones and sand, branches of trees and bushes flying out from under the wheels of a car.
- Enhanced corrosion protection will not interfere with any metal, but is vital for fences used in regions with high annual rainfall, located near the sea or with a high concentration of industrial plants.
Fortunately, modern coatings combine a wide variety of performance properties. In addition to the above, the most relevant are color fastness to ultraviolet light and decorative characteristics such as shades, patterns, textures.
Deciding which corrugated board to use for the fence can turn into a whole epic in the study of the types of material, its characteristics, samples presented on the market. But there is a much simpler way to make the choice as accurate as possible, and the purchase budget is minimal: specialists of the Metal Profile Company will help in choosing an inexpensive material from the manufacturer. And it will always be material of guaranteed high quality, regardless of the price category.
The outer fence not only serves as a protection from intruders, but also partially performs the function of decorative decoration of the local area. You can equip such a structure with high quality and inexpensive, if you know which corrugated board is better for the fence. The use of this relatively budgetary material also has its own nuances. Let's try to understand them and take into account the main features during installation and operation.
What should be considered?
When choosing material for a fence, you need to take into account not only the appearance and cost, but also the quality of the products. It is necessary to determine which corrugated board is better for the fence at the design stage. Poor quality is subject to peeling and burning out over time.
When choosing a material, you must also consider the following factors:
- The thickness of the metal.
- The height of the corrugation.
- Durability of the outer coating of the sheet.
- Dimensions of fencing elements.
- Mounting type and racks.
- The norm in the number of square meters or sheets.
As a result, to the question of which is the best corrugated board for the fence to choose, you will receive a simple answer: the material corresponding to the optimal combination of price and quality, as well as the general exterior in terms of color and design configuration.
Characteristics of the metal profile
Any type of material in question consists of a thin one. It is processed by the method plus the operations of passivation, priming and application of finishing spraying. It can be two- or one-sided.
For example, the inner side can be coated with a paint and varnish layer, and the outer part can be made of polymer components. Such processing allows achieving good strength and resistance to aggressive external influences. Depending on the quality of processing, the parameter of noise and thermal insulation increases, as well as the resistance of the structure to frost.
Which one is better to take on the fence? Experts recommend using sheets with a thickness of at least 0.5 mm. This is due to the fact that the estimated working life of every one tenth of a millimeter is about five years of operation. When choosing a metal profile for a fence, pay primary attention to the quality of the material and manufacturers, which we will talk about below.
What kind of corrugated board is best for a fence?
Hundreds of companies produce the material in question. It is not easy to select sheets that match the required parameters. Below is a list of popular and proven manufacturers operating in the domestic market:
- European manufacturers - Myriad, West Alpine, Salzgitter, Alcelor, Ruukki.
- Domestic brands - Severstal, NLMK, MMK.
- Other manufacturers are Tata Steel from Turkey, Mital Arcelor (Poland).
What is the best thickness of corrugated board for a fence? The above companies comply with the required dimensions. And the worst option would be the Chinese counterpart from unknown companies, the thickness of which may not even reach 0.34 millimeters. This design resembles more foil than a full-fledged material for arranging a fence.
Criterias of choice
An important point is the processing of the profile on machine tools. This option plays a significant role in which corrugated board is best used for the fence. A defective batch will not last long, which implies a lot of troubles associated with the installation and maintenance of the structure.
Another significant parameter is the introduction of zinc. According to GOST, the coating must include at least 275 grams of this component per square meter of the sheet. Unfortunately, this aspect is often underestimated by 1.5-2 times. The importance of the component lies in the anti-corrosion properties, which determine the working life of the fence.
A few indicative tips about the characteristics of a metal profile:
- The optimum sheet thickness should be at least 0.4 mm.
- Zinc inclusion - from 140 grams per square meter of material.
- Thickness over 1.2 millimeters is also impractical, due to the increased cost along with similar strength.
- It is advisable to choose a product manufactured by a trusted manufacturer.
Profile types
Before deciding which corrugated board is best for the fence, let's dwell on the type of profile. In this case, one of the main characteristics is the wave height and its shape. Products marked "C" or "CH" are most often used as fences. The height of the corrugation is marked with digital designations, from 8 to 25 millimeters. The large dimensions of the corrugation determine the smaller size of the working plane. For grades C8 and C10, the optimum width will be 1150 mm, for other modifications - no more than 1100 mm.
The strength and rigidity of the sheet depend on the shape of the corrugation. The lowest indicator is noted for the material of category C8. The configuration is divided into several types, namely:
- Wave-type corrugation, reminiscent of construction slate in construction.
- Trapezoidal configuration (characterized by increased rigidity).
- U-shaped cassette form.
The mass of a sheet of the material in question is from 4.5 to 12 kilograms per square meter. This difference is due to a number of characteristics (metal thickness, corrugation height, additional coating).
What kind of corrugated board is better to make a fence?
Determining the answer to this question, it is necessary to consider the types of sheet coverage. There are tons of options here. Taking into account their features, you can easily choose the best option based on a specific situation. Let's start with the most popular types:
- Hot dip galvanized processing method. This design is distinguished by good metal protection against corrosion. In this case, the amount of zinc should be at least 140 grams per square meter.
- Alumozinc. A coating similar to the previous version, but significantly superior in strength and durability.
- Paintwork finish. This form of processing protects the metal due to the formed film, and also gives a beautiful appearance to the sheets. However, it is susceptible to mechanical damage.
- When choosing which profile for the fence is better from corrugated board, pay attention to It differs in a wide range of colors and thickness. Below we will consider the varieties of this material.
Polymer coatings
Each of the types of this coating has its own advantages and disadvantages:
- Glossy polyester belongs to the budget category. Its thickness is about 25 microns.
- The matte analogue is almost identical in composition to the above material, its thickness reaches 35 microns.
- Plastisol belongs to decorative polymers. The material includes PVC and plasticizers. The thickness of this option is 200 microns. The coating is resistant to weathering and mechanical stress. The surface structure can be done with a textured pattern under the skin or a stroke resembling birch bark. The coating has its own properties, color palette and thickness standard.
- Pural. Pay attention to this material, because, when interested in what thickness of corrugated board for the fence it is better to choose, many people think that the thicker the sheet, the better. The considered polyurethane coating, although it has a thickness of 50 microns, is highly durable and resistant to aggressive influences of any type.
- PDF (PDF). This material consists of 80 percent polyvinyl chloride and 20 parts acrylic. The coating is tolerant to temperature extremes, does not fade, and is optimal for installation on sea coasts.
- "Printech" (Printech). An innovative type of polymer that mimics a variety of natural materials, including wood or stone. The coating is applied by means of offset printing, thickness - up to 35 microns, resistant to salt, thermal and acid influences.
Rack selection
What pipes are better for a corrugated board fence? Experts recommend using two types of racks. As vertical supports, pipes of a profile or round section are suitable. For lags, elements of a profile type with a rectangular or square cut are mainly used.
It follows from this that for the type of fence under consideration, two types of rolled metal pipes are needed. This makes it possible to save on the purchase of expensive cross-sectional analogs. It is worth noting that vertical posts should have an increased diameter, and thin options are suitable for horizontal slabs.
Rack sizes
It is recommended to select vertical supports 60 millimeters in diameter. If the height of the fence exceeds 2 meters, this value increases to 80 mm. Due to the high price, the round pipe is used extremely rarely for racks. Most often, profile analogs with a cross section of 60 * 40 mm or 80 * 60 mm are used.
The total length of the vertical supports is determined taking into account the height of the building. 30 percent of the underground part is added to the total value. The number of pillars is calculated based on the total perimeter, approximately two elements per meter. Only a profile pipe is used as a lag. Such elements are much more convenient when installing horizontal slabs. In addition, the fixing of the profile itself is thus facilitated. The size of the lag is 40 * 20 mm.
Installation features
Below are the options for installing racks for a fence made of corrugated board:
- In the first version, the support is driven into the ground by a third of the length of the rack. This method is fraught with the possibility of deflection of the column from the vertical.
- The bored method consists of dipping the rack into a reamed socket. The supports are fixed by filling the shafts with cement mortar. This installation method is very reliable, but it is time consuming.
- Printed option. The pillar is fixed in the nest with sand and gravel bedding.
- The screw version resembles the pile installation method. The structure is screwed into the ground like a self-tapping screw.
In conclusion, it can be noted that a fence made of corrugated board is a completely reliable and durable structure, characterized by a variety of colors and textures.
Today, in the construction of fences at not only residential, but also industrial, as well as public facilities, corrugated board is increasingly used, which is presented on the market in a large assortment of sizes and colors. Consider the main parameters of the consumable and try to figure out which corrugated board is better for the fence?
Choosing a corrugated board: the main types
So, we immediately note that the products are presented in a large assortment, when choosing a profiled sheet for the construction of a fence, it is important to understand that the material will be used under various conditions, it will be affected not only by wind loads, but also by sharp drops in humidity and temperature. Therefore, we will analyze the types of coverage that are most common today:
- Galvanized sheets covered with a layer (thickness 20-30 microns) of hot zinc. They are mainly used in the construction of floors for utility buildings. The main advantage is the affordable cost.
- Profiled sheet processed with a layer synthetic resin... The material is distinguished by a large assortment of colors, among the advantages are strength, as well as increased resistance to the negative effects of corrosion.
- Decking, the surface of which is treated with a layer of plastisol, this material is expensive, among the advantages can be distinguished resistance to various mechanical damage, and the negative effects of the environment.
Today, the assortment offers a profiled sheet for a fence imitating the appearance of natural wood, stone. In comparison with other varieties, it is more expensive than others.
Types of coverage, their features and advantages
We will consider what thickness of the corrugated board is better for the fence a little lower, and now let's talk about the types of coverage. So, it is important to understand that corrugated board is made of sheet metal, the weak point of which is low resistance to corrosion. To forestall this process, special compounds are used to coat the surface of the product as part of production. Today, two types are offered:
- This category includes aluminum and galvanized corrugated board. In the latter case, the metal surface is covered with a zinc layer with a density of 275 g / m2. The warranty for these products does not exceed three years. However, subject to the requirements for installation, such a sheet can last more than 10 years without losing its original characteristics. Outwardly, a fence made of such corrugated board does not please with beauty, therefore the material is more often used in the construction of temporary fences.
The corrugated board covered with a layer of aluzinc is distinguished by its durability in operation. This option is guaranteed for 8 to 10 years. The surface of the leaf has a silvery shade that does not fade under the sun's rays. One of the advantages is the increased resistance to sudden changes in humidity.
- The cost of such products is higher in comparison with the first considered option, due to the presence of an additional decorative layer. Today, polymeric coated (PE) corrugated board is in great demand. Two textures are offered: matte, glossy. The thickness of the decorative layer is not less than 20 microns. If you plan to build a fence in harsh climatic conditions, it is recommended to consider the following options: plastisol (PVC) 200 microns, polydifluorionad (PVF2), pural (Pural) 50 microns.
What size of a profiled sheet for a fence to choose? External dimensions and other important characteristics
The parameters of strength and reliability are determined by the size of the wave, and this directly affects the working width. Note that the installation can be carried out horizontally or vertically, the installation method does not affect the operational and strength characteristics.
When deciding what size of a profiled sheet for a fence will be more profitable to purchase, it is important to know that for each manufacturer the thickness of the metal may differ and it is in the range of 0.4-14 mm, relative to the height, the size is always standard and equal to two meters.
IMPORTANT! Profile parameters are indicated by GOST 24045-2010, material requirements are indicated by GOST 14918-80. The quality of the profiled sheet with a polymer coating is designated by GOST 30246-94.
The configuration is determined by its windage. A solid sheet with the absence of a wave is subject to large wind loads; it can be reduced only if the sheet is attached to a powerful metal frame. The size range of the profiled sheet that can be used in the construction of the fence will differ in the working height and wave width. And this is even despite the fact that a workpiece with a standard width of 1250 mm is used in production, but it is important to understand that manufacturers use various equipment that determines the future design of corrugated sheet.
Which professional sheet is better for a fence: what to look for?
So, we note that the choice should be made primarily based on the operating conditions and only after that individual preferences and wishes. There are no strict requirements for tightness to the profile that is planned to be used in the construction of the fence, therefore it is sufficient if the metal thickness is within 0.5-0.8 mm (C8, C10, C20). It is not recommended to use C8 for installation in areas with constant wind loads; it is more suitable for the construction of a fence within the boundaries of a settlement.
When choosing, you should also pay attention to the quality of processing and the type of protective coating. An excellent option would be a profiled sheet with a polymer coating, its main advantage is strength, a large selection of colors and resistance to corrosion. For the construction of a fence in harsh climatic conditions, it would be right to opt for a plastisol profiled sheet, which, in addition to all the advantages of the previous version, is resistant to mechanical stress.
When choosing a sheet, it is necessary to pay attention to the thickness, rigidity, as well as to match the dimensions.
Today, the profile products under consideration are presented on the domestic market in a large assortment of colors. To advise what is the best color of the profiled sheet for the fence will be wrong, you can recommend taking into account the statistics. So, most often buyers choose brown, green, dark red, light green. It is up to you to decide which option to choose.
One of the most popular solutions today is options made under natural wood or stone, brick. An excellent choice would be Printech corrugated board, the use of which will give the fence maximum richness in design and reliability, and most importantly, durability in operation.
Another important point, what kind of corrugated sheet is needed for a matte or glossy fence? So, a matte surface looks more attractive, but after rain all its attractiveness is lost. It is recommended to install such sheets on a small foundation; it will be necessary to remove dirt from them at regular intervals.
Before choosing the right corrugated board for the construction of a fence, the following factors must be taken into account:
- The quality of the front side. Consider inexpensive options, on the surface of which chips, cracks, peeling of paint are noticeable, since after their installation on the structure, the appearance of rust will become noticeable after the first rain. As for the dents, they will not harm the material, but the appearance of the fence can spoil.
- Appearance. A significant deviation in length or width should alert, perhaps, during production, the technologies were not followed, and this will only indicate the low quality of the option under consideration.
- Covering wave geometry. When imposing one sheet on another, the waves should ideally overlap the permissible gap of 1-2 mm, no more. If the seller tells you that during the installation the sheet will be pressed using an additional fastener, do not believe it, this will not happen. It is important to know that the sheet is attached to the metal support of the frame; the sheets are not connected to each other with self-tapping screws in places where there is no support.
- Cut quality. So, the length of the sheet is set at the production stage, the sheet will be decided by the size of the guillotine, so the cut should be not only even, but also free from jags. If you find unevenness or chipping, it means that the sheet was cut using other tools.
- Availability of film. Its presence allows safe transportation of the sheet from the production site to the place of sale and further to the construction site, completely eliminating the possibility that the surface will be damaged or stained. The film is removed immediately after installation.
- Warranty. If a high-quality product is purchased, then a quality guarantee is necessarily provided for it, in addition, you can be provided with accompanying documents, which indicate the type of materials used in the production, as well as the technologies used.
And in conclusion, we note that it is not necessary to save on the quality of the corrugated board for the fence, if it is decided to use this particular consumable, then it is necessary to stop the choice on the products of well-known manufacturers.