Did you assume, dear readers, that polyurethane foam can be used as ... a material for the manufacture of objects of art. Although it may not be art, as such, in its literal meaning, but decoration for the garden - a small sculpture, it is quite possible to make. Indeed, polyurethane foam is unusually plastic, hardens quickly and is easily processed - is it not a material for creativity?

Today I will tell you how to make a sculpture of a stork out of polyurethane foam to decorate your garden or summer cottage. There are very few materials needed, and they are quite cheap. If you pay attention to how much garden sculptures cost in hardware stores, you will understand that the price of a pair of foam cylinders is incomparable with their cost. In addition, the stork will be much better for us. So let's get started.

Stork frame

To begin with, we will select a suitable body for the stork - a frame on which the foam will be sprayed. A 5 liter plastic water canister will do just fine. We make the stork's neck out of wire, and to add volume, you can wrap strips of foam plastic around the wire. The stork's legs can also be made of wire, and the nose and head can be cut out either from foam or wood - whichever is more convenient and preferable.

Sculpture making

After making a simple frame, we proceed to spraying foam on our sculpture - we do it carefully, presenting the contours of the finished stork. To make it easier, print a large photo of the bird. If the foam does not fall as you intended, no problem - after drying, the excess can be easily removed with a knife. By the way, if you wish, you can use real bird feathers for the tail - who knows, maybe you can make a peacock instead of a stork. After the foam has dried and finished with a knife, paint the sculpture with ordinary acrylic paint, fix it in place in the garden, and invite friends to appreciate your creative genius. Good luck!

Video about how they made a whole nest with storks from the same polyurethane foam:

Bright garden crafts made from plastic bottles are an easy and affordable way to decorate your favorite area. The original sculpture of a stork made of durable material will renew the familiar landscape and create a joyful mood. A hand-made figure of a bird will make the garden unique and become a family symbol of goodness and happiness.

How to make a stork out of plastic containers

To make such a craft, you need to stock up on free time and be creative.

My yard is decorated with a stork figure, the base of which is a 5-liter plastic bottle covered with polyurethane foam and painted with acrylic facade paints.

Such a wonderful stork is obtained from a plastic bottle and polyurethane foam.

What materials and tools will be needed

Creating your own bird design, you can assemble it completely from plastic containers, fastening them with glue or staples. Or you can make the sculpture more expressive by complementing the plastic structure with wood details.

The frame of this bird is wooden, covered with plumage from plastic bottles.

Or make individual elements of foam.

You can create such an exotic collection using ordinary plastic bottles and a piece of foam.

For our crafts of impressive size, you will need:

• 5-liter plastic canister - base of the body.

  The 5 L canister forms the basis of the torso

• Milk plastic bottles of 1 liter and 1.5 liters, from which white plumage is cut. You can also do with a transparent container, only it should first be painted with white paint for outdoor use.
• Dark plastic bottles of different capacities: 3 half-liter bottles will be needed for making legs and a beak, one and a half liter - for dark feathers.

  A dark plastic container will be needed for feathers, legs and beak

• Styrofoam with a thickness of 10 cm, from which the head of a stork with a beak is cut.

  A bird's head is made from a piece of foam

• Sandpaper.
• Scissors.
• Corrugated tube for the neck.

  A long bird's neck is made from a corrugated tube.

• Metal mesh as a base for the wings.
• Furniture stapler.
• Metal rod 6-10 mm thick for feet.
• Thin wire for fixing the wings.

  With the help of wire, the wings are firmly attached to the model of the body

• Self-tapping screws.
• Glue gun or universal glue.

  Universal glue quickly glues plastic and other materials

• Acrylic facade paints, brushes.

Stork making stages

Having acquired tools and materials, they first procure all the parts of the bird, then assemble them.

Head

A head with a beak is cut out of the foam with a sharp knife.

A bird's head is cut from a piece of foam

Then grind the rough surface with sandpaper. You can paint the workpiece with white facade paint.

The workpiece is sanded with sandpaper to make the surface smooth

To strengthen the beak, 2 triangular plates are used, which are made from a dark 0.5 liter bottle. Having cut off the neck and bottom, cut the resulting cylinder along and cut out the triangles. The plates are bent in half and attached to the beak with self-tapping screws.

The beak is made out with plastic, fastening it to self-tapping screws

Paws

They are made from the top of 0.5 liter brown bottles. Containers with a cut-off bottom are cut to the necks lengthwise into 4 parts, sharpened at the ends and bent outward.

Paws with fingers are cut out of dark bottles

Plumage

The most time consuming and lengthy stage of preparatory work is the preparation of feathers. A large number of them will be required, of different lengths, shapes and colors: for the design of the wings and tail - long, dark and white, for the body - light smaller ones.

Light and dark feathers are used for crafts.

The neck and bottom of the bottle are cut off, the remaining middle part is cut along and stripes are cut out of the resulting rectangle. One edge of the strip is rounded. 6 large feathers are made from a liter bottle.

White bottle with a volume of 1 liter is divided into 6 parts

For the plumage of the neck, small feathers are cut out and the ends are shaped like teeth or fringes. You can decorate a long neck with large plates of milk bottle halves, which are finely chopped around the edges.

Figure skeleton

The body is made from a canister with a cut off handle.

A canister with a cut off handle - this is the body of our bird

As the basis of the wings, a fine-mesh metal mesh is used, which is fixed to the canister with wire or staples. The mesh is cut at the edges in the shape of a wing and folded down.

A fine-mesh mesh is fixed on the canister - the basis of the wings

A wire is pushed into the neck of the canister and folded, forming the frame of a long neck. They fasten the wire to the metal rod of the legs and put on it a corrugated tube or hose from a vacuum cleaner.

Reinforce the neck wire and put a hose on it

A hole is made in the lower part of the container and a bent rod is threaded into it - these will be the legs.

Legs are made of wire, bending it and threading it into the hole at the bottom of the canister

Or they pierce the canister from below and insert curved rods, at the ends of which they put their paws with the neck up.

Assembling parts

After preparing all the parts, the structure is assembled.

1. The head is placed on a wire and additionally attached to the corrugated pipe with glue.
2. Cover the body with plumage starting from the bottom. Light feathers are fixed on the canister with staples.

   Begin to fasten feathers from the lower part of the body

3. A tail is formed from feathers, arranging them in rows and fastening to the body with a stapler.
4. Wire the feathers onto the edge of the mesh wing. To make the plumage of a stork with black edging along the edges of the white wings, the first two rows are made of dark colored feathers.

   The wings begin to be decorated with feathers from the edge, using dark-colored blanks

5. The subsequent rows are formed from white feathers, overlapping them.

   The third and subsequent rows on the wing are made of white feathers.

6. A number of feathers are screwed at the base of the neck with self-tapping screws.

   It's easy to make a stork with wide wings

   In this case, the feathers are screwed onto the entire canister, and the mesh base of the wing is covered with plumage on both sides.

   On spread wings, feathers are attached on both sides

   Garden sculpture decoration

   Decorating a plastic craft can be made brighter, especially if only transparent bottles were used in its manufacture. For this, acrylic dyes for outdoor use are suitable. Pre-wipe the plastic container with an alcohol-based solution and paint over with white or black paint before cutting out the feathers.

   Acrylic facade paint is moisture resistant and does not fade under the sun

   The beak and legs are painted red or wrapped in red tape.

   The beak and legs are painted red

   Eyes are made from beads, decorative blanks for toys or small buttons that are put on glue. You can just paint them with black paint.

   Acrylic paints become brighter after varnishing.

   Stork making workshop

   There are many options for making a stork from plastic containers using elements made of wood, polyurethane foam, and polystyrene.

   Such an original composition of the stork family in the nest is also made of plastic

   Even a beginner will be able to make such a garden sculpture, guided by video material with step-by-step instructions for the workflow.

   Video: how to make a stork from plastic bottles

   Storks from plastic bottles are an original decorative adornment of a personal plot and a subject of universal admiration. After all, they are made from ordinary rubbish, turned by skillful hands into works of art. Made of durable plastic, they are resistant to rain and snow. Over the years, the figures will not swell, the paint will not fade or peel off.

First, decide where you will place the stork figure, because it depends on what base the craft will have. Traditionally, such figures are attached to trees, constructing a nest of branches under them. But you can place the stork on the roof of a house or on a flower bed on the ground.

We decided to make a whole composition, which will include not one, but two figures of a stork, if you repeat everything exactly after us, you will get the same thing.

Prepare the following materials in advance

Plastic bottles.
-Wide board.
-Metal rod or thick enough wire.
- A sheet of polystyrene with a thickness of at least 10 centimeters.
-The hose is corrugated, can be used, leftover, for example, from an old vacuum cleaner.
- Plastic cans with a volume of at least 5 liters.
-Metal mesh, from which we will make the bird's wings.
-Stapler.

How to make a stork figure

Despite the fact that the figure is effective, it will take only a few hours to create it.

First of all, cut out the bird's head from the foam with a base under the beak with a sharp knife. Make the eyes right away, you can draw them, or glue black beads instead.

Cut out a beak from a bottle of a suitable color. We have it in two parts. Do everything exactly as in the photo. The finished beak is glued to the head.

Now let's start creating the body of the bird. For this purpose, we have prepared a canister, from which we will immediately cut off the handle so that the shape is close to the real body of the stork. We attach a mesh to the body, bent in the shape of a canister. We cut off unnecessary details immediately.

We make the legs from a rod, and the board is prepared as the base of the figure. Secure the rod to the board as shown in the photo.

Now let's move on to the fun part: we will decorate the figure with plastic spoons. Start with the tail, gradually working your way down the body.

The head and the body are connected with a wire, and to make the neck look natural, we put a corrugated hose on the wire. We make linings from plastic bottles so that they look like feathers.

Also, the cut out elements of the bottles go to the feathers of the wings. Lay so that each next row partially overlaps the previous one. You can attach the plastic to each other with a stapler.

At the last stage, we connect all the parts together. The result is the figure of a bird, but to make it as realistic as possible, it should be painted correctly. Pay attention to what details of the figure are being painted.

Having the skill of making a stork figure, you can make other bird figures: an excellent imitation of plumage is obtained from plastic bottles and spoons.

The beautiful and bright figure of the stork will add a touch of grace to the backyard landscape, especially if it is made by hand. It may seem that making a stork is difficult and requires many years of practice in needlework, but the method of making it is simple, and the materials are inexpensive. Such a sculpture will be an excellent addition to the local area and decoration for a flower bed, lawn and garden plot, symbolizing the prosperity, well-being and family comfort of its owners.

How to make a stork for a summer residence with your own hands: a master class

A do-it-yourself garden stork is one of the favorite crafts of summer residents and gardeners and there are a lot of variations of its execution on the Internet, but the manufacturing principle is approximately the same in all cases, regardless of the materials used and the richness of the decor. Read how to make beautiful wooden signs for your home.

First of all, the head, neck, torso, frame of the wings and legs are made, which are connected with fastening tools.

All the remaining time is devoted to a rather painstaking procedure for cutting, fringing and decorating feathers - they will make up the plumage of the body, neck and tail of the bird. There are homemade options without the use of plastic bottles, but they are less common. Let's take a closer look at different options for making a stork in this article.

Garden figure materials and tools

The stork figurine is made up of a head, beak, neck, torso, legs, wings and white plumage with interlayers of black feathers. All parts are fastened together with a furniture stapler and set on a universal glue.

The stork's body can be cut out of a piece of wood of the desired size, polystyrene or a 5-liter plastic canister.

• plastic bottles of 1.5 and 1 liter from milk;
• plastic bottles of 1.5 and 0.5 liters for kvass or beer;
• canister 5 l;
• scissors;
• glue;
• self-tapping screws;
• a piece of styrofoam;
• corrugated tube;
• steel rods;
• wireframe mesh;
• thin wire;
• sandpaper;
• furniture stapler;
• red acrylic paint.

The plumage of the stork is also made from transparent bottles, but then the plastic under the feathers must first be painted with white and black acrylic paints.

Stages of manufacturing from plastic bottles

Having prepared the necessary materials and tools, you can start making the component parts of the craft. Find out about beautiful wooden fences with your own hands.

It is important that all parts of the stork's body are proportionate to each other.

Head

With a sharp knife, the outline of the head with the beak is cut out of foam, after which the surface is sanded, and the edges of the beak are smoothed with sandpaper. If desired, the head can be painted with white paint - the coating will give the future product a rich white color and create an additional barrier from the sun, wind and rain.

The beak consists of 2 plates that are attached to the head with self-tapping screws. For the beak of a dark plastic bottle, the neck and bottom are cut off, and the rest is cut into rectangular plates. Triangles are cut from the resulting blanks, which will subsequently be the upper and lower parts of the beak.

The plates are bent in the middle and screwed to the junction of the head and beak.

Paws

The paws are cut out of 2 half-liter bottles with dark walls, having previously cut off the bottom of them. The fingers of the future bird are cut from the very edge to the neck of the bottle - you should get 3 in front and 1 in the back, and bend outward.

Scissors cut each toe into a long, sharp triangle.

Plumage

Processing blanks for feathers to give them a beautiful natural shape with feather veins is the most labor-intensive and time-consuming part of the work.

To cut the feathers, the bottom and neck of the bottle are cut off, and the cylinder of the bottle is cut into 6 equal parts - 6 feathers. They will be of different sizes: for the plumage of the body - small, for the tail - longer. Each feather needs to be airy by creating fringed trim around the edges. He will tell you about metal forged gazebos for summer cottages.

Feathering on the neck can be done in 3 ways:

• cutting out even smaller plates than for the abdomen, decorating them with fringes and curling them with scissors;
• cutting off large plates in the length of the neck and serrating their edges;
• cutting off half of the bottle and making deep sharp cuts in the resulting plates.

Each nib is a rectangular plate made of a plastic bottle with a rounded or embossed edge.

Frame

It is convenient to make the stork's body from a 5-liter canister, from which the handle is previously cut off. Then a mesh mesh is attached to the container, to which future feathers will be attached - it is bent and cut in the shape of a wing.

Then you can start assembling the main part of the product - a tube-neck is inserted into the neck of the canister, and 2 holes are cut in the lower part through which a long piece of a thick rod bent in half is threaded - these are legs.

The nets are fixed with wire or steel staples on the canister.

Assembling and decorating

The stork is collected, starting from the head, - it is connected with a wire to a corrugated tube and is additionally fixed with hot melt glue.

The feathers are fixed with a stapler, starting from the bottom of the canister and further up in layers. The tail is attached at the back of the figurine. The plumage is also layered on the net, starting from the outer edge, and fixed with wire. In this case, black feathers are located on the outer edge. You will get about 6-7 layers of feathers in total. The extreme row, connected to the tube, is screwed in with self-tapping screws.

Prepared plates with sharpened edges made of halves of bottles are wrapped around the neck.

The number of feathers depends on the location of the wings: the option under consideration is designed for folded wings, but when flapping, the wing mesh is covered with feathers on 2 sides and the back of the stork is also made.

After assembling the bird, you can proceed to the creative design of the craft.

Eyes can be bought ready-made in stores where parts for knitted and sewn toys are sold, and glued with hot melt glue. Large black beads or balls are chosen for the inset eyes. Eyes can be painted with simple black or colored paints to your taste.

If you used transparent bottles during the work, you need to paint the feathers before cutting them, after wiping the surface of the coating with an alcohol solution.

The beak and legs of the product also need to be painted with red paint. Alternatively, you can wrap them with red tape.

What else can you make a stork from?

Craftsmen manage to create masterpieces from everything that is lying around in the garage, including, and also use the remnants of building materials after repairs. Several such variations of garden storks can be safely taken into account - they will not be more difficult to make than the previous version.

From polyurethane foam

In this way, you can create a garden sculpture by turning and giving the stork a realistic image. The steel frame will serve as the “skeleton” of the product - steel rods are welded to each other, and then other elements of the stork's body are placed on them.

To make a stork you will need:

• 5 liter plastic bottle;
• polyurethane foam;
• steel rods;
• Styrofoam;
• dye;
• soil solution;
• Scotch;
• rasp.

On the frame, you need to put on a body-bottle, and to the neck rod with tape attach the sharpened pieces of foam to each other with tape. Shaped styrofoam hips are secured in the same way.

Even with the use of waterproof plywood, the possibility of the sculpture becoming soaked in the cold season increases, so it is recommended to store it indoors before the onset of heat.

To make a stork you will need:

• plywood;
• plastic bottles with white and dark walls;
• hot glue gun;
• rods;
• jigsaw;
• self-tapping screws;
• scissors;
• screwdriver;
• furniture stapler;
• red acrylic paint.

It is advisable to apply the elements of the body and wings to the paper first, creating a "pattern" of the parts before cutting them out on a sheet of plywood. The wings are screwed to the body with self-tapping screws. The legs are made of steel rods and are attached with staples to plywood sheets that act as a body. Plywood sheets are also used for or.

Feathers are created from bottles, and each plate, in turn, is trimmed with scissors around the edges to obtain an airy fringe. The plumage is applied to the entire surface of the stork, starting from the back: first, black feathers are laid out, and then white feathers, from which the bird's tail is also created.

Each workpiece is ground at the edges and the surface is primed.

• a layer of red paint is applied to the plywood beak;
• the eyes can be drawn by yourself.

The foot rods can be sharpened from the bottom edge so that they can easily fix the product in the soil.

Styrofoam

Styrofoam stork is a monolithic construction, lightweight and easy to manufacture.

For work you will need:

• foam sheets;
• steel rods;
• universal glue;
• scissors;
• saw;
• furniture stapler;
• sandpaper;
• acrylic paint in black and red colors.

First of all, the legs are made - the lower edges of the 2 steel rods are sharpened, and the upper ones are bent for subsequent fixation in the body made of foam.

The main creative work on such a stork consists in creating the correct blanks from foam, because the finished bird will completely consist of it. The body, head and neck are drawn in foam and trimmed with a saw. He will tell you about plastic barrels for irrigation at the dacha.

In the stork's body, iron rods are fixed with staples, its surface is sheathed with a layer of foam for volume, and wing blanks are glued on top. The neck and head are placed on the rod.

The stork's beak is painted red, and it is better to make insertion eyes, from beads or balls - this way the figure will turn out to be more expressive.

Next, they perform the final modeling of the figure, give it smooth and beautiful features with sandpaper and a knife. This is the case when you don't have to make feathers for the bird - the embossed plumage can be cut right on the body of the product, simply by accentuating the edges of the wings with black paint.

How to make a garden stork nest

The classic composition with storks in the nest traditionally symbolized a cozy house with a large family among the East Slavic peoples, indicating the fertility and hospitality of the owners. Placing storks in a nest on their own plot, flower bed, roof of a house or a playground for families with children will help not only decorate the territory, but also show guests that the owners are jack of all trades. He will tell you about outdoor country sinks.

Old wheels from a bicycle, cart, trailer or wheelbarrow will fit under the nest frame. You can weave a nest from shrubs and live or dry branches, securing the entire structure with steel wire and placing it on a special platform consisting of X-shaped pads.

Video

How to make a stork from plastic bottles, see this video:

Output

1. The most time-consuming work on a garden stork is to create its plumage - each feather must be worked on by hand, giving the edges a jagged or fringed shape so that they look like natural bird feathers.
2. Feathers from transparent bottles should be painted white and black to imitate the natural plumage of a stork.
3. Before painting the feathers, they must be wiped off dust and wiped with an alcohol solution so that the paint lays down evenly.
4. The easiest way to make a stork is to make it completely out of foam and sharpen it with a knife and rasp to the desired shape; The simplest wing without a frame is made from a piece of plywood, which is screwed to the homemade body with self-tapping screws.
5. A body with a neck can be made from a plastic 5-liter canister with a cut off handle and a neck, into which a corrugated tube is then inserted.
6. You can also make a garden sculpture from the remnants of building materials lying around after repairs, and it will cost almost free. In addition, you will need to buy only acrylic paints in order to paint the eyes and and paint the feathers.

It is very easy to make a stork from plastic bottles with your own hands, a master class will allow you to complete this product in a short time. In this case, it is necessary to follow all instructions exactly in order to get a really good result. The product can be placed on a personal plot, which will make it possible to decorate the territory.

Making a stork on your own allows a master class for which you need to use plastic bottles and other materials at hand. To make the craft look the most realistic, you need to make blanks from plywood. Wings and a torso are painted on them. Prepared templates must be carefully cut.

For work, you will need the following materials:

• plastic bottles;
• insulating tape;
• self-tapping screws.

It is better to take bottles that are opaque (white) and dark, and then arrange them, and only red tape is suitable.

The templates prepared earlier must be connected. For this you need self-tapping screws. To make feathers, they use white bottles, which usually sell dairy products. They need to be cut so that strips of the same width are obtained. Many shallow cuts need to be made around the edges to create a fringe.

The resulting wings are fixed on the body of the bird. To make the mount as strong as possible, use a glue gun. It must be applied carefully, without leaving glue marks on the body. To make the tail and the rest of the body, which will be located at the bottom, you need to use dark plastic bottles. For example, beer is sold in such a container.

The beak can be obtained from a blank of a plastic bottle, since the stork has a red beak, the base is wrapped with red tape. The stork also needs legs. Thick wire can be used to make them. For the eyes, take large beads, which are attached to the head with glue. On this, a stork for a garden with your own hands can be completed. It can be placed near a flower bed or on some kind of stand.

Details of the manufacture of the second option

To make a mascot bird for the garden with your own hands, you should prepare the following materials and tools:

• empty plastic bottles;
• 2 wooden beams: thick and wide (will serve as the base);
• thick aluminum wire (can be a rod) to make the lower limbs;
• foam (thickness 10 cm);
• corrugated hose;
• plastic canister (2 pcs., 5 l capacity);
• metal mesh (under the wings);
• stapler.

How to make a stork with your own hands? The procedure will take a little time, but the algorithm is simple. A stork will appear on the paths of the infield or in the garden after several hours of execution.

First you need to start making the bird's head and beak. These parts are cut from the foam. On the surface, you can either paint the eyes with black paint or glue 2 black buttons (you can use beads).

The beak itself must be cut from a dark plastic bottle. It will be in 2 parts, glued to the head. To get the body of a bird, you need to cut off the handle from the canister.

Bend the metal mesh tightly around the contour of the canister. Remove excess material. You can perform the lower limbs if you bend the rod, the ends of which should be fixed in a wooden block. Plastic nibs are cut from bottles. They are attached to the base of the canister. The tail should be fastened first.

You can put a stork's neck using a wire fastener to an armature. The next step is to slide the prepared hose onto the wire. Since the feathers on the neck should be small, they are attached with tape. The feathers on the body are fixed on a metal mesh.

Since the bird in the garden will be located in an upright position, its wings will be folded. They must be fixed with a stapler. The feathers should be positioned so that the details of each subsequent row overlap the previous row by 1/3. This will give the craft a natural look and feel.

The master class ends with the fastening of individual elements. To make the product as attractive as possible, you can make a decorative touch-up of the beak, eyes, legs. The craft can stand on the street throughout the summer, it is not afraid of bad weather.

Alternative product

An original stork for the garden with your own hands can be supplemented with a baby in the nest. The implementation of this option will help make the home happy and bring prosperity and well-being to the house. To make a stork sitting in a nest, patterns of a Tilda bird are used as a basis. This is a fairly modern and fashionable home-made toy made of fabric. The patterns are simple for her.

Individual elements of the craft are cut out of dense and durable fabric. Details are sewn together with a thread. To give the body volume, you need to fill it with any filler, so you do not need to completely sew the bird right away. Burlap, sawdust, straw, feathers, unnecessary rags, etc. can act as a filler. After completing the filling stage, the hole is completely sewn up.

The beak is made separately. To create it, you will need durable red cardboard. The finished part is attached to the already made head. You can sew clothes. To do this, you need to take measurements from the finished bird. At the final stage, eyes are glued, the baby is wrapped in a light cloth and placed next to the mother.

If you install the craft on the branches of trees in the garden, during the rain it must be removed from there so that the appearance of the product does not deteriorate. Such a bird is also placed on windowsills, it will perfectly harmonize with indoor flowers.

Taking the fabric stork as a basis, feathers are obtained from white plastic bottles in which milk or other dairy products are sold. They are held together. As a result, the wings come out.

Unusual option

Noteworthy is the stork-making master class, which is based on a large plastic bottle with a volume of 6 liters. To make the head, you need to use styrofoam, which will need to be carefully cut out. Don't forget about the shape of the beak and eyes. Black stones can act as eyes, which are fixed with glue.

The beak can be made from a regular plastic bottle. He, too, is glued to the head. A large plastic bottle will act as a torso. You need to cut the neck in it. Special mesh made of metal - wings. If the bird's wings are bent, it is necessary to make appropriate bends on the net.

The legs are made of wire, which is folded in several layers. The feathers will be from light-colored plastic bottles. They are cut so that the individual feathers look realistic. Fixation is done with a wire to the wings themselves.

To make the neck look voluminous, the bottles need to be cut into small pieces, you get a fringe. They are arranged in rows. Small bottles are put on the paws, which are also cut at the base. If the fixing of the parts seems weak, then the fixing process can be carried out using self-tapping screws.

Making a stork is not a very long and difficult undertaking. To bring your idea to life, you can use the following guidelines. However, you can make certain adjustments to the idea, which will allow you to create a unique and original product.