Natural and artificial veneers are consistently among the top sellers. This is not surprising - veneered door panels look beautiful, have an affordable cost, are reliable and durable. Such designs can be incorporated into any interior design solution thanks to a wide selection of shades and veneer textures - from almost white ash to chocolate brown wenge. And externally, the canvases with veneer trim look exactly like natural wood.

Caring for veneered doors is not particularly difficult. You just need to regularly remove dust and dirt, as well as monitor the health of the door fittings. However, there are a number of rules that must be followed in order for the door blocks to retain their aesthetic appearance and functionality for a long time.

How to wipe the veneer? Can veneer coverings be washed? These questions are of interest to everyone who has bought and installed door units with wood veneer finish.

To clean the veneer coating, do not use abrasive and alcohol-containing agents, as well as detergents containing oils, acetone, alkalis, acids. It is also worth refusing to use washing powder, dishwashing detergent and other similar household chemicals.

When choosing what to wipe your doors with for your daily cleaning, choose a microfiber cloth or soft cotton cloth dampened with warm water. This is enough to remove dust and wash away fresh dirt.

Veneered products are not afraid of exposure to high humidity. Since the veneering is carried out on a substrate made of a moisture-resistant MDF board, such canvases can be washed with warm water. However, prolonged contact of the coating with moisture should not be allowed; after wet cleaning, you should always wipe the wooden structure with a dry cloth.

Tip 2: home remedies for the care of veneer finishes

If persistent stains have formed on the coating made of natural or artificial veneer, you should not immediately go to the store for expensive specialized chemicals. Veneered doors can be effectively cleaned with household cleaning products. Try cleaning your door structures with a solution of laundry soap or a mixture of alcohol and regular water in a 1: 9 - 1:10 ratio. These home care products will help you clean your veneer quickly and effortlessly.

Raw potatoes will help remove greasy stains from the veneer. The potato should be cut into two halves and the area with fat should be rubbed thoroughly with the cut. When the potato juice dries up, wipe the stain with a dry cloth, which will remove the starch along with the fat.

Even with the most careful attitude to the door structure, there is always a risk of scratching the veneer coating. Therefore, over time, microscratches and abrasions inevitably appear on the surface of the canvases. To prevent scratches and extend the service life of door structures, experts advise periodically wiping the door with a polish for veneered furniture, preferably with wax in it. After processing, a protective film is formed on the veneer, which protects the veneer from damage and stubborn dirt

You can buy wax polish as:

• aerosol;
• spray;
• cream:
• liquids.

The polishing compound wipes the door blocks from dust and dirt well, and also refreshes the color of the veneer cladding, and the wax fills in microcracks and hides minor defects well.

Often it is not required to rub the door leaves with polish and wax. The film stays on the veneer for a long time, keeping its protective qualities. It is enough to wipe the canvases with polish once or twice a month so that your doors always look spectacular and well-groomed.

Light door blocks are a universal solution for any interior; they are presented in a variety of shades and textures in the Porta Prima catalog. Light-colored veneer is also convenient because dust and micro-scratches are invisible on its surface. However, this does not mean that light-colored door designs do not need maintenance. They should be regularly wiped clean from dust and dirt.

To care for light finishes, you can make your own polish by mixing three teaspoons of melted granular wax and 150 ml of soybean oil. The components are mixed until a homogeneous mass is formed and cooled to room temperature. To clean light-colored veneer doors, apply with a dry cloth and rub until shiny and smooth. This mixture is great for cleaning stubborn dirt and greasy marks around doorknobs.

The use of wenge-colored doors is a popular design technique when decorating modern interiors. They fit perfectly into the style of minimalism, loft, industrial and others like that.

Contrary to the widespread misconception about the "non-staining" of dark canvases, dust and dirt spots are clearly visible on their surface. To keep dark doors looking neat and tidy, they need to be cleaned regularly.

A special polishing compound will help to clean the wenge veneer from stubborn stains, which is made from the following components:

• ½ melted beeswax granules;
• 1 teaspoon lanolin
• 4 teaspoons of soybean oil
• 1 teaspoon of turpentine.

All ingredients are thoroughly mixed to obtain a homogeneous mass. The mixture is applied to the surface of the web and rubbed into the coating with a soft cloth. Carved panels require special attention, they must be cleaned with great care.

To do this, you should adhere to the following rules:

• do not expose veneered door structures to prolonged contact with moisture;
• it is necessary to clean the dirt from the veneer surface immediately after they appear;
• care for veneer using only mild detergents;
• do not open the curtain beyond the prescribed opening angle;
• try to scratch the canvas and do not bang the doors with all your might;
• do not expose veneered structures to sudden changes in temperature and humidity.

If you follow these simple tips, veneered doors will serve you well for many years and retain their attractive appearance.

Scratches, cracks and abrasions on the veneer surface can be restored at home. However, only doors with natural wood veneer finish can be restored.

For the restoration of not too significant defects, a special wax pencil is used, its color is matched to the shade of the veneer coating. You need to tear off a small piece from the pencil, knead it in your hands and distribute it evenly over the damaged area. Excess wax mass is wiped off with a soft cloth.

Another way to eliminate the defect is to fill the crack or scratch with a special liquid wax. The damaged area must first be cleaned of dust and dirt, and then treated with fine-grained sandpaper. Next, you need to apply the preheated wax and remove the excess with a rag.

To repair serious damage to natural wood veneer, it is best to turn to a professional. They will prepare special "patches" that match the coating in color and texture and glue them to the repaired area. If the canvas has deep cracks and chips, the master will pre-seal them with wood putty.

Fittings are an integral part of any door structure. To make the doors convenient and comfortable to use, you need to regularly take care of the hinges, handles and locks.

During operation, the doors may begin to creak or poorly close. To prevent problems, it is necessary to clean the hinges from dust 1-2 times a year and lubricate them with machine oil, technical vaseline or WD-40 agent. If the sashes have sagged, you will need to adjust the door hinges.

Doorknobs should be wiped regularly with a damp soft cloth to remove stains and dirt. You can use plain lukewarm water or soapy water. After finishing cleaning, wipe the fittings with a dry cloth. Loose handles must be tightened immediately, otherwise they quickly fail and require replacement.

How are wooden doors washed so that they retain their properties for a long time and shine with cleanliness? This question worries all owners who have an installed wooden door.

A wooden door is environmentally friendly, durable, reliable and suitable for any room design. Therefore, there are wooden doors in almost every apartment, house, office.

Cleansers can vary and range from expensive to traditional. The choice is up to you, which detergent to wash the wooden door, the main thing is to avoid strong chemicals (they can ruin the surface of the wooden door).

A large list of detergents that are used to clean wooden doors:

1. Folk remedies:

• Acetone or white spirit;
• Table vinegar;
• Ammonia;
• Lemon essence;
• Clay;
• Raw potatoes.

2. Household chemicals:

• Dishwashing liquid;
• Silith;
• Domestos;
• Shumanite;
• Profit.

Stages of solving the problem yourself

In order to wash a wooden door with your own hands, while doing it quickly and efficiently, you must complete the following list of actions:

1. Wipe the door with a damp cloth;
2. Then apply the selected detergent to the entire surface of the door;
3. Wipe complex dirt more intensively;
4. Wait five minutes;
5. Remove foam and moisture from the wooden door, you can use a towel or a special cloth.

These actions will clean any wooden door, but if you have stains, then you should resort to professional advice. And in order to surely remove all stains and dirt, contact the EKS company, which will clean your apartment quickly and efficiently.

• Do not use abrasive powders when cleaning doors, they can damage the surfaces;
• When you soap a wooden door by any means, it is best to stand for 5 minutes (and this is the maximum);
• Purchase a polish based on natural beeswax, this product will help keep your wooden door clean and shiny;
• If the stain is greasy and old, you can use regular potatoes. Cut the vegetable into two parts, attach it to the stain with a cut, wait a little. After that, be sure to wipe the door dry, the stain will definitely go away;
• The prepared solution will help to remove fat from wooden doors: 2 tbsp. tablespoons of ammonia + 1/2 liter of warm water. Gently wipe the stain with this solution, it is guaranteed to cope;
• For tough stains, a mixture of mixed clay and vinegar (in equal proportions) may help.

By following the advice of professionals, you will easily understand how to clean wooden doors.

Doors are made from a variety of materials, each of which requires a special approach during cleaning. Metal and glass are immune to the most active solvents, so acetone and white spirit can be used. In other cases, it is recommended to use alcohols, vinegar, citric acid and soap solutions - they are quite enough to dissolve most of the grease stains on similar and interior doors.

Doors are a place of increased contact, therefore stains appear there with enviable regularity. The problem of cleanliness, including doors, in kitchens and in homes with small children is especially noticeable. The tasks of cleaning are as follows - how to wash off greasy stains from the doors so that the dirt disappears and the coating remains intact.

Cleaning MDF doors from greasy stains

In order to clean MDF doors from greasy stains and stains, it is not necessary to use expensive specialized products.

From improvised substances with fat, potatoes will do a good job. The washed potato is cut in half, the bare part is rubbed until it is completely saturated with potato juice. Let it dry for a few minutes, after which the dirt is wiped off with a dry, clean cloth. To avoid streaks, the peeled coating is rubbed with talcum powder or powder.

Note! Fresh stains with MDF are wiped off with a solution of dishwashing liquid diluted and foamed in warm water.

Steel door

The advantage of such doors is that the metal is resistant to even the most active grease solvents.

Therefore, if metal doors are dirty, you can safely use acetone or white spirit, which is impregnated with a clean cloth. Such substances very quickly dissolve fat on a hard surface, it is not absorbed into it, but immediately passes into the fabric. So that after cleaning there are no streaks, the metal can be wiped with a wet cloth.

Wooden door

Wooden doors are of two types - unpainted and painted.

In the first case, it turns out that the greasy stain falls directly on the wood, which tends to be soaked in liquids before they dry out. In the second case, we are dealing with paint on various bases, to which a special approach is needed - you need to wash the wooden doors from greasy stains and stains, and not damage the paint and color.

Unpainted wooden doors

To remove fat from pure wood, you need to prepare a special solution, which consists of vinegar and clay in equal proportions, mixed to the consistency of a homogeneous paste. This paste is liberally rubbed onto a dirty stain. In this state, the door is left until the paste is completely dry, usually about half an hour is enough for this. After drying, the door should be rinsed with warm water.

Painted door

Here the wood is covered with a layer of paint, which prevents the fat from absorbing into the fibers. Thus, the dirt dries on the surface, it can be removed with alcohol or vinegar. The use of acetone or other solvents is strictly not recommended, because they can damage the water-based paint or the one that was made on their basis.

Soak a clean cloth with liquid, then wipe the stain until the grease dissolves and begins to be absorbed into the cloth. The movements should be in the direction from the edges of the stain to the center, so that the grease does not smear even more on the surface.

Note! To avoid streaks, wipe the cleaned area with a light soapy solution prepared in warm water.

Wooden doors treated with varnish

You can use vinegar or citric acid diluted in warm water to wipe off the grease from the varnish. Such substances will not harm the varnish coating due to the low activity, but even old greasy stains will succumb to them.

As in the previous cases, you can use a clean cloth or cotton pads (if the stains are small). Residual marks can be cleaned with warm water or soap.

Glass door

Glass is one of the most solvent-resistant materials, so grease can be washed off with a variety of substances.

Various alcohols and alcohol-containing liquids are especially effective (this applies to strong alcohol, antiseptics and special means for cleaning glass and tiles). A solution of ammonia with water in a ratio of 1:10 will cope with fresh stains. Additionally, you can use vinegar, rubbing alcohol, soda or citric acid. Older and stronger stains can be dealt with with acetone or any paint thinner.

In addition to a smooth glass surface, for the manufacture of doors, glass canvases with protrusions and a rough surface are used, where fat is very readily clogged and cools.

In such cases, it is necessary to moisten the glass more abundantly so that the solvent penetrates as deeply as possible into hard-to-reach places and breaks down the fat.

Dissolved grease should be wiped off with a soft, clean cloth. To avoid streaks, the glass is washed with an alcohol-containing window cleaner and wiped dry.

PVC doors

To wipe away stains on PVC or eco-veneer doors, a mixture of liquid soap and plumbing cleaner is used. The liquids are mixed in equal proportions, the resulting mixture is evenly rubbed into the oily stain using clean rags or a sponge. It takes 5 to 10 minutes for the fat to break down, after which the door is rinsed with plenty of warm water and wiped dry.

Doors from laminated chipboard

A very common door covering due to its cheapness, hence the most problematic - the top layer consists of paper, which in no case should be rubbed, otherwise the appearance of the door leaf will be irrevocably damaged.

To effectively dissolve fat, you can use isopropyl alcohol, vinegar, citric acid and cotton pads, with which the stain is wiped very gently. Periodically, the discs need to be changed in order not to smear the fat even more on the surface.

For high-quality laminated chipboard coating, you can use solvents or acetone. In this case, the stain is not wiped off, but is soaked by applying a damp cotton swab for 3-5 minutes. After that, the contamination must be wiped off with a dry cloth.

How to clean a polished interior door

All of the above products should be used to remove greasy stains from polished interior doors. Additionally, after the dirt has been removed, it is necessary to use, which will restore the original shine and remove all matte traces of cleaning.

The video below shows various ways to remove greasy marks from doors:

Doors collect the same dust and dirt as walls. This means that you can clean and wash them in the same way. But only a few doors have surfaces as smooth as walls.

To remove surface dirt, wipe the door with a dry towel. Then wrap the broom with an old soft towel and use it to walk around the corners and crevices where dust collects. Brush intricate embossed jewelry with a soft toothbrush.

Wash the door when you clean it of dust and dirt. If it is wood and etched, use wood oil soap mixed with water as directed on the package. A couple of home remedies can help clean your painted door.

Mix 4 liters of warm water, 1/2 cup of ammonia, 1/4 cup of colorless vinegar, and 1/4 cup of washing soda.
Mix 1/2 cup of ammonia and 1 teaspoon of mild dishwashing liquid in 4 liters of warm water.

Moisten a natural sponge with the solution to make it completely soft. Then squeeze it out better. Wash the door from the bottom to the top to avoid drip marks. Rub small areas in a circular motion. Rinse the sponge frequently and better to avoid smearing the dirt. If the solution remains clean, you do not need to rinse the door with water.

You do not need to remove the door accessories to clean them. Arm yourself with plastic wrap instead of a screwdriver. Secure it with duct tape around the part to be cleaned. If it's metal (like a pen), use a metal cleaner such as Bugy Metal Cleaner, which cleans any metal, including brass. If the accessories are glass or ceramic, no plastic wrap is required. Wipe them with a rag dipped in alcohol, which will not damage your already clean door.

And a little more on the door ...

Each type of door requires an individual approach to care and products intended only for certain types of doors, since the use of products that are not intended for care, for example, for lacquered doors, can damage the varnish itself and their surface.

Interior wooden doors without varnish require the most delicate care - at the beginning of cleaning such a door, you must first remove the dust, and only after that do the cleaning itself. Means for cleaning doors can be both specialized and so-called "folk remedies" - a solution of tap water with alcohol, approximately in the ratio of water - 90%, alcohol - 10%. After cleaning with such a solution, remove the remaining liquid with a dry cloth. For lacquered wooden doors, after such a cleaning procedure, apply polish or other special agent. The application of such products is necessary, as the varnish coating can become covered with cracks, and the polishing agent fills them, preventing the wood from drying out and the formation of even larger cracks.

From the history of doors.

The ancestors of the first wooden doors for buildings are doors made of sycamore or German maple, used in Ancient Egypt (3000 BC) and Ancient Persia (1000 BC). In Italy, the oldest arched door is perhaps the Etruscan door at Volterra (4th century BC). Over the long years of its existence, the door has acquired a number of fundamental characteristics, such as architrave (from the Greek archi- senior, chief and Latin trabs - a beam), a door jamb, a threshold, a door panel, a door - a book, etc. Architrave and a jamb were transformed in today's door frame, the threshold has remained practically unchanged, and the ancient doors on trunnions - "turntables" have been modified into technologically improved doors on hinges. However, the "pin, rod", as a structural element that ensures the movement of the door leaf, remained unchanged.

As for the material that served as raw materials for doors, iron and bronze were gradually losing ground to wood. As far as the creations of outstanding sculptors and architects that have survived to this day can be judged, wooden doors were already diverse in design and decoration at that time. Walnut and oak, famous for their durability, were and remain the most used wood materials, while the more valuable types of wood: maple, rosewood, pear, teak, ash, cherry and others were temporary favorites in different centuries.

MDF panels, from which modern interior and exterior doors are usually made, are often contaminated with the appearance of greasy stains. To maintain the ethics and beauty of such doors, many hostesses have to use various improvised means to remove such stains. Moreover, depending on the type of surface coating, use the appropriate cleaning agents. In this review, we will take a closer look at how to remove greasy stains from MDF doors, while maintaining a natural look and without spoiling the surface layer.

Basically, the localization of greasy spots falls on the area where the door handle is located, since it is to it that we most often touch with our hands. As you know from the course of biology, the skin of our hands tends to highlight the sweat segments. When it comes into contact with the surface of the door, the very transparent sweat traces remain on which, over time, a lot of dust particles settle, and they turn into real dirty spots. Especially often young hostesses with small children and pets face such a problem.

But it is also worth noting that greasy stains on the surface of interior doors appear as a result of contact with a variety of biological or chemical liquid substances with a certain percentage of fat content.

Safe methods for cleaning MDF doors from greasy stains

Every woman strives to preserve 100% perfect cleanliness and external beauty of all surfaces in the house, therefore, in order to most effectively remove traces of grease from a wooden surface, it is recommended to first accurately determine the type of coating. After that, proceed to the selection of the most effective cleaning agent.

Advice: before starting to clean the door from various contaminants, it is recommended to conduct a trial test on the interaction of the door with the selected cleaning agent in an inconspicuous area. If no reaction occurs during the test application of the cleaning agent, use the selected ingredient to cleanse the main area of ​​contamination.

Also remember that it is not recommended to remove stubborn dirt by using the following substances:

• pure alcohol;
• undiluted acetone;
• all types of solvents;
• using acids.

Moreover, it is strictly forbidden to use special metal and hard sponges to remove dirt, since the use of the listed equipment will not only eliminate the greasy stain, but also the protective surface layer, leaving the solid wood layer unprotected. As a result of such cleaning, you will have to either completely repaint the entire door, or even change it altogether.

Let's take a closer look at how to remove a greasy stain from MDF with a laminated, veneered and painted surface layer.

Cleaning laminated doors

First, let's look at how to clean laminated MDF panels. First of all, it should be noted that such doors have a special protective coating in the form of the thinnest film, thanks to which it is much easier to take care of them:

• To effectively remove greasy marks from the laminate, you should first prepare an alcohol solution by mixing pure alcohol with water in a 1: 9 ratio, where 9 parts is water, and 1 part is alcohol. Next, you need to moisten a small piece of cloth or napkin in the prepared mixture and, applying it to the contaminated area, try to fix it for 5–6 minutes, then wipe the treated area with a clean dry towel.

It is important to remember that laminated surfaces should not be cleaned with abrasive products, various alkalis and acids.

• You can wash off grease stains from the laminated surface with 72% laundry soap. But first, prepare a strong soapy solution from it. To clean the door, you should first quickly wipe all affected areas with soapy water using a foam sponge or melamine cloth, then rinse all soap stains from the treated areas with clean water and wipe the entire surface of the door dry with a paper towel. Perform procedures using soapy water and clean water very quickly so that the door does not have time to absorb a large amount of liquid and swell.
• You can remove a greasy stain from the laminate with a special pencil, which can be purchased at any store with household chemicals.
• And also on the shelves of modern supermarkets and household stores there is a huge selection of pasty chemicals designed specifically to remove greasy marks and other types of stubborn stains.

Cleaning the veneered surface of MDF doors

If you have installed new MDF doors with a veneered surface in your apartment, then to prevent the appearance of various scuffs, perspiration marks from hands and other stains on it, it is recommended to cover them with polish immediately after installation.

But if such a nuisance happened, and still there were greasy traces, then we will take a closer look at how to remove these contaminants in order to preserve the original appearance of the veneer coating.

Our ancestors also used one unique way to remove various contaminants from any surface - this is the use of a potato cut in half. To accomplish this, you will need the following additional ingredients:

• the potato itself, cut in half;
• a small amount of baby powder (or talcum powder);
• clean cloth or napkins.

Before removing the greasy mark from the veneered surface, you should:

1. Depending on the amount of contamination on the surface of the door, take one or two halves of cut potatoes and place them on the cut to the tracks themselves, and, with little effort, carefully rub the entire area of ​​contamination until the moment the potato juice appears.
2. The whole thing should be left in this form for 10-12 minutes, until all the juice is completely dry.
3. After thorough drying, white starch should remain on the surface of the door, which should be removed with a clean dry cloth or napkins.
4. If, after removing the starch, white marks remain on the veneer, then taking a clean towel or napkin, apply a small amount of baby powder to it and carefully wipe the remaining stains.

Tip: after the cleaning procedure, the veneer should be carefully polished with a thin layer.

Cleaning the painted MDF surface

Almost all painted wooden surfaces have another unique property - varnish coating, which provides additional protection to the paint and gives it a beautiful shine. Therefore, in the process of caring for such a door, it is not recommended to use abrasive cleaning agents that can break the protective layer, lead to tarnishing of the treated area and the disappearance of the previous shine. Let's take a closer look at how to wash painted doors in order to preserve all the beauty of their appearance:

1. The first recommended solution is a baking soda solution, which should be prepared with equal proportions of baking soda and mouthwash. In the prepared mixture, moisten a clean cloth and treat all areas with dirt, then wipe everything dry with a clean towel.
2. You can also clean the painted door with a strong soap solution prepared on the basis of liquid 72% soap, after using which the entire treated surface of the door should be thoroughly rinsed with clean water and wiped dry with a towel.

How can you clean the interior doors with a polished surface from greasy stains?

Now let's look at how to remove grease stains from a polished wooden door. For this, it is recommended to use talcum powder or baby powder. After applying one of the products to a clean napkin, you should treat all contaminated areas of the door surface and leave everything for 20-25 minutes. After the time has passed, the remains of talcum powder or powder should be removed using a white sheet of paper or a napkin.

How to clean greasy stains from MDF and chipboard panels?

There are four ways to remove grease stains from chipboard, MDF and chipboard surfaces:

1. Using a solvent: moisten a foam sponge with this product and rub it gently into the grease spots for 4–5 minutes. After that, the treated area should be thoroughly wiped with a dry towel.
2. Using a natural remedy in the form of citric acid, which should be diluted in the amount of two tablespoons in 200 ml of water and, using a cotton pad, wash the affected areas of the door surface for 3-4 minutes.
3. Using baking soda: dilute 3 tablespoons of this product in a glass of water and a cloth soaked in the resulting mixture to remove all dirt, then wipe all treated areas dry.
4. Detergent application: Dissolve 3 tablespoons of dishwashing liquid in half a glass of water and foam thoroughly. Then apply the resulting foam to greasy spots and leave it all on for 4–5 minutes. Then rinse the panel with a cloth with clean water and dry it with a dry towel.

And how to clean doors made of PVC panels, see the following video:

Dear visitor! If you know other methods of how to remove stains, please leave your experience in the comments.