Electrolux has been present on the Russian market for several decades. But before it was known to our consumers, mainly due to its high-quality household appliances. Refrigerators, washing machines, electric water heaters and microwave ovens from this well-known Swedish manufacturer have long won the respect not only of the Russian consumer, but all over the world.

And now, relatively recently, the company began to supply to the market, in particular, and gas water heaters Electrolux, for which there are reviews, both positive and negative. Let's try and disassemble this geyser, using the Electrolux GWH 265 ERN Nano Plus model as an example.

We will try to find the advantages and disadvantages of this model, to understand the principle of operation, having considered its technical characteristics and device. Based on these operating instructions, everyone will be able to draw conclusions and make their own reviews about the Electrolux gas water heater, which can now be bought inexpensively, at a low price.

Features of geysers Electrolux

One of the first on the market was the Electrolux GWH 275 SRN model, the reviews of the owners and specialists for which were very good, thanks mainly to its high-quality European assembly (Spain). In recent years, the company has supplied two models to the Russian market: Electrolux GWH 285 ERN Nano Pro and Electrolux GWH 265 ERN Nano Plus automatic.

Gas water heater Electrolux Nano Plus

Both models are equipped with automatic ignition from batteries installed in a special compartment and a gas control system. These gas water heaters are assembled in China, and components are supplied from Europe. Visually, the "Nano Pro" model has an on / off button for the device and two knobs for adjusting the temperature and water flow.

Model "Nano Plus" externally differs from "Nano Pro" by the presence of an informative digital LCD-display on the control panel. It displays the water temperature at the outlet of the column, there are indicators of flow and battery charge level, which blinks when the gas column does not turn on when the water is turned on.

The display shows errors in the operation of the Electrolux model Nano Plus, for example:

E0 - the emergency hot water temperature sensor has been triggered;
E1 - low battery charge;
E2 - the emergency flame sensor has been triggered.

The principle of operation of a gas water heater

When we open the hot water tap on the mixer, the water flow sensor is automatically triggered. After half a second, the information display will turn on, which will show 2 blue indicators: "battery" and "shower".

After a few seconds, the flame indicator will light up. After turning on the gas burner, all indicators light up, except for the battery indicator, which now simply shows the level of their charge.

When we stop using hot water, turn off the tap. The flow sensor shuts off the gas supply to the gas burner of the column, all indicators are turned off. Only error codes can be displayed in the event of a malfunction of the device.

Gas column display Electrolux Nano Plus

Gas water heater device Electrolux

Like most gas instantaneous water heaters, the Electrolux GWH 265 ERN NanoPlus geyser consists of a gas and water unit, a heat exchanger for heating water, a gas burner with stainless steel nozzles and an open combustion chamber.

A feature of the device of the Electrolux Nano Plus model is the presence of a copper heat exchanger that is safe for human health and does not contain oxygen and lead, made using a special technology. Oxygen free.

Let's take a closer look at the diagram of what else can be found under the body of this device.

Gas water heater device Electrolux

1 - solenoid of the gas part

2 - hot water outlet

3 - water temperature sensor

4 - LCD display

5 - threaded fitting for connecting bellows

6 - fitting for draining water

7 - electrode for ignition of the burner
8 - flame ionization electrode

9 - column electronics unit

10 - open combustion chamber

11 - sensor of protection against overheating of combustion products

12 - emergency hot water overheating sensor

13 - heat exchanger

14 - gas burner

15 - rod with a membrane of the water unit
16 - the water unit itself
17 - double case for batteries
18 - cold water inlet
19 - gas part
20 - branch pipe for gas pressure control

Gas water heater Electrolux NanoPlus: technical characteristics of the water heater

The rated power of this model is 20 kW, and the hot water capacity is 10 l / min. The column is able to turn on at a water pressure in the pipeline from 0.15 atm., Which is a good indicator compared to the models of the previous generation of Electrolux gas columns.

The chimney diameter is 110 mm, and the dimensions of the device are very compact: 55 x 32.8 x 18 cm. The diameter of the gas, cold and hot water connections is 1/2 inch. It is possible to transfer the operation of the apparatus from natural to bottled (liquefied) gas.

In addition, this water heater has a built-in burner flame modulator, unlike, for example, a direct competitor - a gas water heater. This function allows you to set the desired water temperature. We set it once, and the device itself will maintain the temperature set by us. The rest of the parameters and characteristics are shown in this table.

Technical characteristics of the Electrolux Nano Pro model

Possible malfunctions of the Electrolux gas water heater and their elimination

1. The column does not turn on.

The batteries may need to be replaced or they are inserted incorrectly, observe the polarity of the batteries.

2. The water at the outlet heats up poorly, not hot enough.

Try reducing the flow of cold water to the column or increasing the gas flow.

3. Smells like gas in the kitchen or apartment.

Probably there was a gas leak in the gas pipeline. In this case, you should not look for the cause of the gas smell yourself, be sure to contact a gas specialist.

Advantages of the geyser Electrolux GWH 265ERN Nano Plus:

- compact size
- environmentally friendly copper heat exchanger
- stainless steel burner
- smooth modulation of the burner
- low price from 8500 rubles
- famous brand

Disadvantages of gas water heaters Electrolux:

- Chinese assembly
- low productivity
- narrow model range
- hard to find spare parts

Generally, gas water heater Electrolux Nano Plus is well worth the money, despite varying reviews. It is modern, has all the necessary functions and good technical characteristics. If you are not confused by the Chinese assembly and its low performance, then you can safely buy the Electrolux GWH 265 ERN Nano Plus gas water heater in the stores of your city. We watch the video review.

Geysers GWH 265 ERN Nano Plus from the Swedish concern "Electrolux" are the most reliable, efficient and safe equipment in their class. But poor water quality, sudden power surges in the absence of a stabilizer, user errors are the reason for the repair of the water heater using original spare parts.

Benefits of original spare parts

Spare parts, parts and assemblies for a geyser of the GWH 265 ERN NanoPlus series are in great demand, since the equipment is actively used in apartments and private houses. If it is necessary to repair an instantaneous water heater, the masters recommend buying only original spare parts / parts that have a lot of advantages over analog products:

• Accuracy of the dimensions of the spare part, as well as branch pipes, washers, connectors and other mounting elements;
• Full compatibility - when upgrading a column, the manufacturer adapts every detail that perfectly fulfills its function;
• Safety - no gas and water leaks with the risk of domestic methane explosion;
• Availability - the cost of the original spare part is slightly higher than the prices for an analogue. But the result is significant savings, since the part / spare part will definitely fit in size and will last several times longer.

In case of the slightest malfunctions or if a scheduled maintenance is required for the GWH 265 ERN NanoPlus column, it is important to purchase original spare parts or certified analogs indicated in the manufacturer's catalog.

From fasteners to the heat exchanger - all original spare parts for repair and maintenance of the column

In the catalog of our company, you can quickly select and buy all the spare parts that are necessary for the repair and maintenance of GWH 265 ERN NanoPlus gas water heaters from Electrolux. Regardless of the condition of the equipment and the complexity of the breakdown, you can buy spare parts that are ideal for your equipment:

• Gas-water blocks and water system;
• Ignition blocks and electrodes, igniters and pipes for them;
• Preostats, microswitches;
• Thermocouples, temperature limiters, sensors and controllers;
• Electromagnetic, gas valves;
• Membranes, water block covers, body elements;
• Control panels / boards, protective automatics;
• Consumables, fasteners, repair kits, etc.

Experienced engineers of our company will help you find the necessary spare part, place an order or place an individual application for the delivery of a rare / missing item. Each client will appreciate the benefits of cooperation, since we:

• We offer affordable prices to retail customers;
• We carry out fast delivery and certified repair of GWH 265 ERN NanoPlus columns;
• We have developed special terms of cooperation for corporate and wholesale customers.

Nice modern and inexpensive speaker. It is better to use alkaline batteries. They last much longer.

disadvantages

It flowed after a year of operation.

A comment

If you installed the column yourself. then you can forget about the guarantee, and if the heat exchanger leaks, the cost of repairs will be comparable to the cost of a new column.
As soon as our column began to flow, they began to look for documents on the purchase of a column in the citylink, but they could not find it, but they are necessary for warranty repair. It's good that in citylink you can make copies of purchase documents only by order number. The order number can be viewed in your personal account on the website or in SMS on your phone.
The column was installed by a gorgaz master, so there was an act on the installation of a column with seals. Also in the citylink they put a stamp in the column passport (where the store's mark should be).
Then they called the Simona-service company, which is located in Nizhny Novgorod. They confirmed that if the case is guaranteed and there are installation documents, then they will be able to come and repair the column at home (I live in the city of Zavolzhye, Nizhny Novgorod region).
A few days later, the master came and confirmed that the case was under warranty and we were ordered a new heat exchanger (as they said, more reinforced). After 1.5 weeks they called themselves, the master came in the evening and replaced the heat exchanger with a new one.

Once again I was convinced that citylink is a serious company that cares about its customers. For the last 5 years, I have been buying all household and computer equipment only in citylink. There have never been any problems with warranty repairs.

0 0

price, dimensions, ease of installation and operation. Accuracy of the temperature sensor!

disadvantages

child mount, no upper protection against dirt and debris. start-up delay when opening the tap for 5 seconds, sensitive to regulation settings. the diameter of the exhaust outlet pipe is non-standard.
assembly china-analogue water heater vector.

A comment

For 10 years I used a Chinese water heater vector, it's time to change - I took the electrolux-giblets one to one, slightly changed the design and saved on the cladding ...
slows down at startup, works only when the water supply tap is fully open, does not ignite with a low pressure ...
I would like more from this company ...
vector and oasis are 2 thousand rubles cheaper ... and productivity and efficiency are higher.

Complain Did the review help? 9 6

Convenient control, easy to install, heats up perfectly.

disadvantages

Sometimes it does not ignite.

A comment

A neighbor has a neva, it is not possible to adjust the temperature, but everything is simple here.

Instantaneous water heater Electrolux GWH 265 ERN NanoPlus is an extremely easy-to-use gas water heater with electronic ignition. The burner is ignited automatically when the hot water tap is turned on, then the heating power and water temperature are adjusted using ergonomic knobs on the front control panel. The flame is monitored by the ionization control unit. The gas burner is made of high quality stainless steel. The chimney diameter is 110 mm, which makes it possible to connect to almost any exhaust system.

In GWH 265 ERN NanoPlus gas columns, the heat exchanger is made of high quality oxygen-free copper using the ОХУGEN FREE technology, which maximizes its resistance to oxidation and high temperatures during operation and does not require the application of any additional protective layers.

The heat exchanger in NanoPlus gas columns does not contain lead and tin, which indicates its safety for human health and the environment, as well as high reliability and durability.

The control panel of the GWH 265 ERN NanoPlus gas water heater is equipped with a modern digital LCD display with intelligent control. The display shows the temperature of water heating, as well as various functions of the column operation: indication of the presence of a flame on the burner and the presence of water circulation in the heat exchanger, indication of the battery charge level for ignition. If the charge level is insufficient for ignition, the battery icon will flash, which means that it needs to be replaced.

Multilevel security system

The first level of the security system is the traction sensor. It is triggered in the absence of draft in the chimney or the appearance of a reverse draft, turning off the gas supply. The second level of the security system is a thermostat that protects the column from overheating. The third safety level is a hydraulic safety valve designed to control the circulation of water in the heat exchanger. This protects the gas water heater from overheating. The fourth level - flame ionization control monitors the presence or absence of flame on the burner. The intelligent control system controls the operation of all sensors. In the event of any malfunctions or errors in the operation of the column, an error code is displayed on the LCD-display, which is very convenient for maintenance and operation of the device.

Electrolux geysers are designed taking into account the peculiarities of work in Russia, Ukraine, Kazakhstan, Belarus and other post-Soviet countries, where the pressure of gas and water in the mains is sometimes quite low. The minimum pressure of water for switching on is 0.15 bar, for gas - 13 mbar.

Advantages of the geyser Electrolux GWH 265 ERN NanoPlus:

Electronic ignition

LCD-display with indication of water heating temperature

Indication of heating temperature, presence of a flame on the burner, water circulation, battery charge levels

Stainless steel burner

Oxygen-free copper heat exchanger

Adjusting the temperature and heating power mode

Multilevel security system

Low pressure water and gas operation

Low gas consumption

Low noise level

Universal chimney diameter

Buy with this product

400 rub.

180 RUB

150 rubles

Questions and answers

Hello. I live in a 5-storey building. The water pressure is weak, it falls, then it is normal. The old column (Neva) smoked a lot (I don’t know how to call it exactly), in general, all the walls turned yellow ... We plan to make repairs, change the finish and at the same time purchase a new column. We chose Innovita Primo 11 i NG. Will it fit? How often should the batteries be changed? Also considered columns Electrolux (For example, electrolux gwh 10 nanoplus 2.0) Which one is better in this case?

There is a neva semiautomatic device. It works, but what a pain to set it on fire. I want to buy an automatic electrolux GWH 10. But I don’t know if the diameter of the chimney will fit. But it is impossible for the master to come and see if it will fit or not? I'm not an expert, how can I find out.

Vyacheslav

Good afternoon. Column Neva 4510, diameter of the exhaust pipe 120 mm, I want to change it to an 11PL gas gas with a diameter of 110 mm. Is it necessary to install a sealant made of asbestos cord or can the chimney steel pipe be left like that.

Good afternoon!
Tell me, please, how much will it cost to buy this column, dismantle the old Neva 4513, as well as install and connect this one?
So that you can safely use it?

Also wondering how much safer and more serviceable this column is in comparison with the Neva 4513?

I think, take this one or just put the same Neva 4513?

Thanks.

Hello,
Is the column Hyundai H-GW1-AMBL-UI 306 suitable for low water pressure and does not need to be connected to electricity?

Hello, please tell me the column, with auto-ignition, for home, for a long service life. Thanks.

Konstantin

Hello, I want to change the baltgaz 5514 gas water heater to the baltgaz comfort 17, would you like to clarify the mounting locations are identical on these models? And comfort 17 is suitable if I have 3 hot water connection points? There are no problems with the pressure of water, but the 5514 cannot cope with heating the water, only a small trickle. Will Comfort 17 solve this problem?

Hello!
There is a Vaillant mag pro column (mag oe 11-0 / 0 xzc + h), connected to the home gas pipeline, from it there are three points of consumption - the sink in the kitchen, the sink in the bathroom and the shower / bathroom faucet itself.
The cold water pressure in the apartment is good. When at least one of the consumption points is turned on, when a minimum amount of cold water is added to the mixture, the temperature of the total flow drops sharply. That is, the column cannot provide the required head of warm water. Is it really that low-power or is there a connection problem (connected by the previous owner of the apartment)? If, after all, there is not enough capacity, then which of the Neva / Baltgaz would you recommend?

ANSWER: Good afternoon! Your column is not even designed for 2 points of consumption. The only option for 3 points is BaltGaz Comfort 17.

Good day! I choose between Ariston fast evo 11b and Electrolux GWH 11 nanopro 2.0, tell me which one is more reliable? or can you advise another?

ANSWER: Good afternoon! The most reliable at the moment are BaltGaz with a 5-year warranty

Please specify the country of the manufacturer of the geyser Electrolux GWN 12 and 14 at present

ANSWER: Good afternoon! The factory is located in China

What is hydro-ignition. I want to take a Bosch WRD 13-2G speaker. Am I right.

ANSWER: Good afternoon!
With this system, ignition occurs automatically when the water is turned on, without batteries. But such a system is not very reliable, we recommend purchasing a column with automatic ignition from batteries.

What is the warranty period and which components are covered? and do you need to carry out regular maintenance to keep the warranty?

ANSWER: Good afternoon!
Electrolux speakers have a 2-year warranty from the date of installation. To extend the warranty for a second year, it is necessary to carry out maintenance one year after installation - this is a requirement for all gas water heaters.

Hello! Failed Electrolux 14 liters. Worked for 15 years. What column would you recommend to replace. Extra "bells and whistles" are not needed. I chose between Electrolux and Bosch. Maybe something else should be considered at all? thanks

ANSWER: Good afternoon! Electrolux is still a good option. There have been a lot of complaints lately on Bosch - the heat exchanger starts to leak right after the warranty period expires. And as an alternative, you can consider Baltgaz / Neva - no one can compare with them in terms of the warranty period.

Good day! And who answers the questions? Manager or engineer? If the manager - no questions. If you are an engineer, then I have 2 questions.
1) in the passport for the gas column it is indicated "productivity is 6 l / min", what does this mean? That at any inlet pressure (volume of passing water) only 6 liters of water will pass through the water block, or that the heating specified in the documentation, for example, by 50 degrees will be provided only to this volume (if it increases, the water heating will be less at a constant combustion power, if it decreases - more heating)?
2) In a series of gas columns Neva Transit (made in "China"), the minimum is indicated. start-up water pressure 0.02 bar. It's not a mistake? Maybe MPa, not bars? Why is the value so low? For all manufacturers, this value is not less than 0.1-0.15 bar (= 0.01-0.015 mPa = almost 0.1-0.15 atm).

ANSWER: Good afternoon!
1) This suggests that in a minute the column will release 6 liters of water at the outlet, heated 25 degrees above cold water. If you want to heat the water by 50 degrees, then the productivity will accordingly be 3 l / min.
2) Yes, a mistake. Minimum pressure 0.2 bar. Thanks for writing about it, correcting it.

Hello!
Please help me with the choice of a RELIABLE gas water heater for the apartment, so that it is enough for 2 points of consumption, taking into account the low pressure in the water supply system (2-2.5 atm in the system with off taps).

ANSWER: Good afternoon! Our speakers are best suited: BaltGaz Comfort 13 or 15, or Neva 5514. If you are interested in imported ones, then Electrolux 14.

I've heard a lot about the best mora top speakers. Is it so? and which one would you advise if not a mora for 13 liters?

ANSWER: Good afternoon! Mora speakers are really good, but they have problems with availability and cost. In this regard, we recommend the Neva / BaltGaz and Electrolux gas water heaters, which have no problems with this, and they are reliable - they are guaranteed for up to 5 years.

Konstantin

Hello! I have a great desire to buy a geyser Neva 4508 on liquefied gas, in connection with which where can I buy it in Moscow?

ANSWER: Good afternoon! You can buy from us, for example))

Good afternoon. There is a gas column AEG 11 ERN. Suddenly it broke down - when the tap was turned on, the water stopped giving a spark to the burner (the battery was changed). Is it possible to repair it? If not, which one to change Bosch 10 - 2B or Bosch 13 -2B at the lowest cost (chimney, etc.)? Thanks.

ANSWER: Good afternoon! AEG speakers have not been sold in Russia for a long time. And you are unlikely to find spare parts for it.
We advise you to change not for Bosch, but for a better speaker - for example, Electrolux. In terms of displacement, I think 12 liters will suit you.

Alexey Anatolyevich Mikhailov

Good day!
I have Electrolux GWH 265 ERN NanoPlus (5 years). I suspect a malfunction of the water unit (water is oozing presumably from under the gaskets). The question is - is it worth changing the entire column? And if it is worth what? The same for another five years - somehow it does not warm the soul. Does it make sense to consider Bosch W 10 KB or Electrolux GWH 10 NanoPlus 2.0 as an alternative? Will they be more reliable? The house has problems with the water pressure (it is extremely small, even the suites work only with the water flow tap turned out to the maximum and are regulated only by gas) and there are no problems with gas and traction.

ANSWER: Good afternoon! Most likely, replacing the assembly will cost almost as much as a new column. Choose Electrolux between Bosch and Electrolux. Bosch 10 KB performs poorly in contrast to Electrolux. The model you indicated is correct - Electrolux GWH 10 NanoPlus 2.0, with a poor water pressure, it should work normally.

Good evening. Can you please tell me what metal the heat exchanger is for electrolux gas columns?

ANSWER: Good evening! Electrolux, like many other manufacturers, have a copper heat exchanger

Vladimir Alekseevich

What is the structural difference between BaltGaz Comfort 13 - 15 columns and Neva 5514 (heat exchanger, ignition, materials used, functional, etc.)? Thanks.

ANSWER: Good afternoon! The Comfort series columns have a digital display showing the water temperature and the battery level. Otherwise, there are no differences

Are there Vaillant MAG Geyser columns?
(it is written that it has been discontinued, but the price is worth it)

ANSWER: Good afternoon! The speakers are really out of production, we have no remnants left.

Hello.
We bought and connected a Bosch Therm 4000 O WR 13-2 G column. A day later, we noticed that hot water dripped from the inside of the heat exchanger about once every 1-3 minutes. Sometimes a hissing sound is heard, as if a drop of water is dripping onto a hot surface, possibly a burner. Water drips only when the column is running. When turned off, water does not flow, although the column remains under the pressure of water (the tap is closed at the outlet).
Does this mean that the heat exchanger is defective? Do you need to do something in such a situation, or it may pass by itself over time?

ANSWER: Good afternoon! Most likely condensation is falling, there is nothing wrong with that.

What do you recommend to buy. Water heater ... innovita 14i or Baltgas comfort? What is more reliable? Yuri

ANSWER: Good afternoon! We would recommend Baltgaz Comfort. They have a 5-year warranty, all components are Russian, of good quality. It is also easier and cheaper to find components at Baltgaz in case of post-warranty repairs.

Hello, we settled on a choice in favor of this product. Geyser Bosch WR 13-2 B with auto-ignition, but the question remained: "Is it possible to regulate the water temperature not on the column itself, but by opening an additional tap with cold water?" Thanks in advance for your reply

ANSWER: Good afternoon! This can be done, but not desirable - the column in this case will serve you less.

Who is the manufacturer

ANSWER: Hello, Portugal is the country of origin for all Bosch speakers.

How much does it cost to install a Bosch WRD 13-2 gas water heater?

ANSWER: Hello, usually the installation of a gas water heater costs 2500 rubles. Materials are paid separately. It is better to check in detail with the manager or installer by phone on the website.

TAMARA Konstantinovna

Hello! Hanging Neva 3208. I want to install Bosch WR13-2P. How much will the replacement cost? Thanks.

ANSWER: Hello, usually the installation of a gas water heater costs 2,500 rubles, dismantling the old one - 350 rubles. Materials are paid separately. It is better to check in detail with the manager or installer by phone on the website.

Thank you for your question, I received an answer.
I have another question. Is it possible to replace the Neva lux 5013 column with a Bosch Therm 4000 O WR 13-2 B gas water heater and how much will it cost. Thanks.

ANSWER: Good afternoon! Sure. Dismantling the old column costs 350 rubles, installing a new one - 2500.

there is a geyser neva lux 5013 (5025), which column can be replaced with the least labor and material costs

ANSWER: Good afternoon! Consider 5514.

Extremely disappointed with Electrolux technology. A gas water heater was bought, which turned the water either into hellish boiling water, or into the icy heart of your ex. Taking a dip in the shower is simply impossible. I decided that I was not lucky with this column, so I bought an electric boiler for 30 liters. I could not get enough of the first six months - you could safely swim! Hooray. Then she dripped. I called the service department, which made a conclusion about the factory defect "tank leak". Changed under warranty after 2 months. At this time he was using a crazy gas water heater. Finally, a new boiler was installed, one to one the previous one. But our happiness did not last long - again the same attack, the boiler was leaking. I installed a new safety valve that could cause a similar breakdown. I checked the grounding - everything is normal. Now both the column and the boiler have broken down so that they had to hang up a bucket. I tried to revive the column - I bought a new control unit, installed new batteries, checked all the sensors - and nothing changed. The locksmiths concluded that it could not be repaired and that there was some hidden defect. Conclusion: don't take Electrolux.