Blinds are among the demanded and popular products among the population. The most popular are vertical fabric and plastic structures, due to a long presence in the market, and due to the possibility of using both in the office and at home. The assortment of varieties of vertical blinds allows you to give them any look - from strict formal to bright children's.

Vertical fabric in the window opening

Products of various colors and textures are produced. The main advantages of vertical blinds include:

Preparing for installation

Before heading to an organization specializing in the installation of blinds, it is necessary to take all accurate measurements of the window opening for the installation of the product. You can read how to measure windows for any type of blinds in the article link .

If it is easier for you to entrust this business to a professional, call the measurer at home, while it will not be superfluous to remind the owners that for calling the master to the house, the owners are obliged to make an order.

When measuring the window yourself, also remember that the manufacture of vertical slats is carried out on an individual basis and the subsequent change in their length will be problematic.
In addition, it is necessary to decide on the type of fastening of the product: to the wall or to the ceiling in the window opening.

Choosing a mounting method

Blinds of vertical type - both fabric and plastic - can be fixed to the wall surface, to the ceiling or to the slope of the opening in its upper part. The entire installation of vertical blinds is reduced to drilling the wall for fasteners, and to the installation of the structure on these fasteners. It will be necessary to perform the work of drilling and fastening the brackets designed to fix the eaves.

Methods for installing plastic blinds

Before proceeding with the installation, measurements are taken of the width and length of the window opening. Vertical products usually cover the entire wall, the cornice is mounted on the wall above the window at least ten centimeters from the edge of the window opening. In the case of a low ceiling, the guides can be hung under the very ceiling surface, which visually will increase the size of the space. To ensure free movement of the lamellas along the guides, their opening and closing, as well as a level arrangement, it is necessary to take into account the presence of all protruding surfaces during installation. These can be window sills, radiators of the heating system and other items. In these cases, special offset mounting brackets are used.

You will need tools

• electric drill with drills of the required diameter;
• screwdrivers of various types: regular and Phillips;
• fasteners;
• tape measure;
• directly the cornice.

Fastener Installation Tool Kit

You should also keep in stock clips, dowels and brackets, despite the fact that they are included in the device kit. If something is missing, it will not be possible to hang the product quickly, while the installation of the blinds should be just that. The structure is mounted with clamps by screwing in screws, blinds are placed in the clamps and the device snaps into place.

Installation steps, diagrams

When placing vertical blinds in a space that is limited on the sides by window openings or the walls of a room, a distance of about two centimeters should be left free at the edges. This is because the width at the top and bottom surfaces may have a small margin of error. During installation, this may affect the placement of the product in the opening, they may not enter any skew. In addition, the resulting gap will create a dramatic, aesthetically pleasing backlighting with contour light.

Installation of vertical blinds is carried out in several stages, which in fact are not particularly difficult, and the whole operation ends quite quickly.

1. The instruction contains detailed descriptions and sketches of actions. According to the instructions, assemble all the control mechanisms of the product, place exactly as many runners in the cornice as there are lamellas, fix the control devices for the location of the lamellas (there can be one or two of them).

How to hang a cornice to the ceiling
Installing vertical blinds on the wall

1. On the wall or ceiling, mark up with a pencil under the brackets or under the cornice itself. By standards, self-tapping screws are placed at a distance of every 50 cm - 80 cm on plasterboard walls, and on concrete walls, three to four fasteners are enough (on both sides, and one in the middle).

When placing the guides, we advise you to always use the building level. The area near the control mechanism will need to be additionally strengthened, or additional fasteners made. This will eliminate the possibility of breakdown of the structure due to excessive efforts during its use.

1. The cornice is inserted into special grooves until a full click is released, indicating its rigid fixation. Otherwise, the structure may simply collapse during its operation.

The cornice should make a distinctive click

At the end of the installation, fix the slats in the runners of the cornice by clicking them firmly. In the lower part, along the guides, you will need to lay two chains to control the lamellas of the structure.

Installing blinds solves many window décor problems. Curtains, drapes, tulle, whatever fabric they are made from, require frequent washing, as dust and dirt accumulate on them. The density of the curtains determines how well they transmit or block light.

Blinds are much more comfortable than curtains in many ways.

Depending on the angle at which the lamellas are located, they completely open the access of natural light to the room, partially block it, gently scatter or completely isolate the room not only from light, but also from thermal radiation. They do not require special care, and it will not be difficult to install the blinds on your own.

Varieties

Horizontal

A light-shielding structure with a horizontal arrangement of lamellas, which has become familiar, almost classical for window decoration.

Advantages:

• Compactness. Installed directly on the window, leaving the sill free. This saves space and allows you to place greenery on the window in favorable conditions for it;
• Low weight of the structure;
• Strength and rigidity of the lamellae, preventing deformation;
• Fire safety;
• Simple control mechanism;
• Special coating or impregnation against dust, dirt, odors and grease;
• Resistance to humidity and temperature extremes;
• Various materials for the manufacture of lamellas: wood, plastic, aluminum, less often fabric;
• Easy installation;
• Affordable price.

Some disadvantages are worth mentioning:

• When fastening to the frame, the angle of inclination of the window folds when opening is limited;
• The lamellas emit a characteristic knock or ringing in the wind. To avoid this, it is necessary to purchase lower fasteners that are not included in the kit and quickly become unusable;
• The structure is subject to repair in case of severe deformation of several lamellas, but it will cost as much as new blinds;
• Not suitable for balconies and loggias with sliding windows.

Vertical

They differ from horizontal ones:

• More aesthetic appearance. Horizontal blinds are more functional, while vertical ones are decorative;
• The ability to cover a large area with one cornice. Horizontal blinds, as a rule, consist of narrow slats and are intended for minimalistic decoration of small windows. Vertical models come in different widths and easily cover large windows, arches and doorways.
• Variety of materials. They can be made of wood fibers, wood, aluminum, bamboo, plastic, woven and non-woven fabric, mirror, blackout, thread. The abundance of materials provides another advantage - the variability of colors and textures;
• Modern and original window decoration, opening up more design possibilities;
• Simplicity of control mechanisms. Possible both mechanical and electrical;
• The ability to place photo printing on the "curtains" due to the larger surface and better characteristics of the material;
• Practicality. Larger lamellas are easier to wipe when necessary, which does not occur often. If in the case of severe pollution, for example, in a children's room, the slats still need to be subjected to hygiene procedures, this will not take much time - they can be washed by hand and in a washing machine;
• Possibility of installation on non-standard windows (triangle, trapezoid, arch, bay window);
• The structure is subject to repair. To replace a particular part, you do not need to call a master, it is simple enough to do it yourself. You can replace the lamellas one at a time without having to dismantle the entire structure.

Vertical blinds, as the name implies, are a simple and convenient light-shielding structure consisting of longitudinal vertical plates.

Roll

Roller blinds, roller shutters are solid fabrics, usually from textiles, but other materials are also possible, which roll upwards like horizontal blinds. The height can be adjusted by fixing the curtain with a weighting agent on the lower strip of the canvas.

There are different types of roller shutters: with an open drum (for mounting directly on the window) and with a decorative cornice; "Mini" for installation on each frame separately and "roll-cassette" for shading the entire window.

There is an opinion that roller blinds are the most budgetary and practical option for window decoration, but this is not entirely true. Of course roller shutters have their advantages: a variety of natural and synthetic fabrics, colors and patterns, ease of care (wet cleaning is allowed) and operation, the ability to fix the curtain at the desired height, special impregnations against dust, moisture, high temperatures and glare, compatibility with other types of curtains. It is convenient, if necessary, to hide the room from the sun, to decorate the window with beautiful tulle so that you cannot see what is happening inside from the street.

But with so many advantages, they also have significant disadvantages.:

• Budget price- it's a delusion. Yes, by itself, a medium-sized curtain made of common material will be inexpensive, but it will look boring. In order for the window decoration to be complete, it is necessary to think over additional decor, and this significantly increases the cost;
• Roller blinds in the bedroom, study and rooms with high windows require electrical control. Electrically driven structures are expensive, and some manufacturers also produce noise;
• Impossible make a custom-made curtain from a specific textile. You can choose only specific products of a specific brand, since the range of fabrics for the production of roller blinds is very limited: translucent, textured, reflective, perforated, blackout and that's all, perhaps;
• Maximum width roller blinds - 280-300 cm, that is, covering a large area with one cornice, for example, a panoramic window or balcony will not work;
• Can problems arise with installation not on the wall, but in the window opening, since the reel is wider in width than the curtain itself. There will inevitably be gaps on the sides of the window openings. Ceiling or wall mounting preferred.

Pleated

This type of blinds is similar to both horizontal and roller blinds. The design consists of a control mechanism (chain or electric drive), weighting materials, pleated fabric that resembles accordion fur.

The assortment of materials, colors and textures is very diverse.

Peculiarities:

• They close from top to bottom, like classic canvases, from bottom to top or from both sides at the same time. In this case, the degree of density of the "accordion" can be adjusted, thus closing either the upper, or the lower, or the central part of the window;
• Suitable for curtains of irregularly shaped windows;
• The optimal solution for roof, attic, ceiling and sloped windows;
• "Opening", the canvas is compactly gathered into a fold and hides inside the cornice;
• Convenient for installation on all types of windows;
• Various mounting methods and control mechanisms (manual and electric);
• Woven fabric is washable;
• The curtain fabric can be made of two types of fabric at the same time, which makes it possible to adjust the degree of transparency, darkening, sun protection;
• Easy installation can be done by hand.

Pleated pleats:

• Classic. In appearance, they are most similar to horizontal blinds, but they can also be vertical. Made from fabric, paper or plastic. Designed for darkening the room, protecting it from heating by the sun's rays, and zoning the interior space of the room.

• Corrugated. This type is vertical and horizontal double pleating. As a result, folds appear smoother, tighter and more dense. Corrugation made of plastic and paper in this design absorbs a significant part of the heat and protects from bright light.

• Inclined. A variety of pleats especially for windows that are angled in the attic or ceiling. Their peculiarity is in a specific assembly system that does not allow a canvas made of any material to sag, being at an angle. Mostly inclined models are available with electronic control.

• Arched. The most flexible canvases that take any shape, like a paper fan. A good solution for rooms with non-standard windows (arches, trapezoids, triangles, beveled windows).

• "Day Night". The fabric of such blinds consists of two layers of fabric: a lightweight fabric that transmits a large amount of light for daytime use and a dense, dark one for protection from the bright sun during the day and prying eyes in the evening.

Cassette

Such systems involve either the use of horizontal slats or a solid canvas, but are not horizontal blinds or roller blinds. They differ in the types of cassettes (angular, round, flat), controls (various types of mechanical and remote), materials used (plastic, textiles, bamboo, aluminum).

Their main feature lies in the design, the special structure of which makes it possible to fix the blinds at a minimum distance from the window glass. This prevents deformation, sagging, the appearance of folds and irregularities, completely opens the window sill.

Advantages:

• Compactness. Cassette blinds take up a minimum of space, leaving the owners the opportunity to show their imagination and organize additional window decor or leave the window sill with a functional surface;
• Simple and straightforward control type;
• Long service life. Special impregnation protects the canvases from dust, grease, dirt, moisture, abrasion;
• Ease of hygiene procedures. Cassette systems require little maintenance. Their small surface area is enough to wipe with a damp sponge and soapy water every few months;
• A variety of designs for an interior in any style;
• The tight fit of the canvas to the glass surface protects equally well from heat and cold;
• The ability to mount the system yourself;
• A variety of materials - from light window decoration to total blackout protection;
• The ability to combine blinds with curtains, tulle, lambrequin.

Mounting methods

There are three types of blinds fastening: to the wall, to the ceiling, directly to the frame, and two ways - with and without drilling.

The universal basis of any fastening is a cornice, which is attached to a wall, frame or ceiling in different ways.

With drilling

It is carried out using self-tapping screws, brackets on which the cornice is installed, fishing lines. Additionally, you will need a pencil, ruler, drill, screwdriver.

First you need to make a markup in those places where the brackets will be located.

For reliability and accuracy, it is necessary to drill holes for the clips in the marked places. Then, applying the brackets in turn to the PVC frame, fix them on the markings with a screwdriver. Next, the cornice is installed and the whole structure is assembled.

No drilling

If in the future it is planned to replace the blinds or other options for decorating the window, it is not recommended to damage the plastic windows. The holes from the self-tapping screws will remain in the frame forever and will significantly spoil the appearance of the windows. In this case, it is easier to turn to a method that does not require drilling.

In this case, the brackets are attached in two ways:

• for the upper part of the PVC profile on the opening sashes (you can simply hang it like a hook);
• on double-sided tape, which can be glued without fear of leaving traces.

Mounting blinds on the balcony requires a special approach. The balcony structure plays an important role here. The type of glazing determines the choice of certain blinds and the method of their attachment. In general, almost all options are available for balconies. In this case, special attention should be paid to the type of blinds, since not all of them are universal for different types of windows. For example, horizontal blinds are not suitable for a balcony with sliding windows, as they can deform during operation or from strong winds.

Measurements and markings

The final result depends on how correctly the measurements are made.

Even expensive beautiful models will not look good on the window if there are gaps in the opening or the edges of the lamellas will constantly bulge against the wall.

It is important to pay attention to the following points:

• For the most accurate indicators, a steel tape is used;
• It is impossible to round off the figures obtained, the accuracy must be observed to the millimeters;
• When ordering blinds, the width parameter is specified first, length - the second;
• Not a single window opening has absolutely perfect geometric shapes, therefore, measurements upward and in breadth must be made at least at two points.

Horizontal

If you plan to attach blinds to the movable half of the window, you will need to measure the gap between the glazing beads and add from 30 mm, which will prevent gaps in the structure. The height of the blinds is equal to the height of the window sash.

For installation inside the window opening, measurements are required at three points in height and width, since the openings are not always absolutely proportional.

The width is identical to the wide side of the glass plus the thickness of the rubber seal. The length is identical to the height of the window (including elastic bands) and a margin of 1cm. To install the eaves, an additional 30-40 cm will be required before the slopes and loops. Control chain - 2/3 of the window height.

When choosing to fix the cornice to the wall, the width parameter increases by 10 cm, the height is measured from the attachment point of the brackets to the floor at will.

Vertical

When installing in the armhole of the window, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right sides of the arch, subtract 1 cm from the smaller value.

For wall mounting, at least 10 cm must be added to the wide side of the slope. The length of the lamellas can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor.

Ceiling mounting means determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.

Roll

To mount the canvases to the wall, only one measurement is required - from the edge of the window sill to the markings for the brackets, and the width can be up to 300 cm.

In the arch of the window, roller blinds are mounted after measuring the width, from which you need to subtract 4 centimeters, and the length of the canvas is equal to the height of the window minus 15 mm.

Pleated blinds likewise do not require a professional approach in taking measurements and installation.

Installation of vertical models

Vertical blinds are the most convenient way to decorate a window for self-execution. They are attached in three ways: to the ceiling, to the drilled frame, to the frame without drilling.

In all cases, the fastener is a cornice with or without a decorative facade.

The brackets on which the structure is held are fastened with self-tapping screws, hung or glued to double-sided tape. Special scotch tape, despite its seeming impracticality, is fixed very firmly, therefore it is important to correctly apply the markings for installing the brackets. After they are glued, moving them will be very problematic.

Installation procedure for vertical blinds:

1. Preparation of tools. You will need a stepladder, a set of self-tapping screws from the kit, a building level and drawing accessories, a drill, a screwdriver.
2. Pencil markings for mounting brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
3. Attach brackets in a suitable way (with or without drilling).
4. Installation of the cornice.
5. Installation of slats. To do this, you need to pull the control cord, on which the lamella fasteners are located, so that they fit into the desired position. Then fix all the lamellas on the hooks of the fasteners.

Installation of horizontal

For installation, you will need a set of tools: a drill, a cross-section screwdriver, a screwdriver, drawing accessories.

The instruction for installing horizontal blinds on windows contains a list of items that is performed step by step:

1. Draw a scribing line for installing the brackets. It must take into account the distance between the clamps and the control mechanism, between the brackets (from 60 cm) and to the extreme areas on the blind strip (25 cm). If the blinds are wide and are heavy, it is recommended to use intermediate fixings.
2. Drill holes on the surface to which you plan to attach the brackets to install the dowels. It is possible to use blinds on plastic windows without drilling.
3. Profile installation.
4. Fixing the upper louver bar on the brackets. It is important to remember that the blinds are already assembled at this stage.

Working with horizontal models on inclined surfaces requires a little more effort and dexterity.

How to hang roller blinds?

Like other types, roller blinds or roller shutters are attached in several ways: they can be hung, glued, attached to the frame.

The first way- the simplest and most affordable for do-it-yourself installation is a fastening without drilling based on double-sided adhesive tape. Suitable for tilt and turn mechanisms on windows. Performed step by step:

1. Degrease the areas of the frame and fasteners that will be connected with adhesive tape.
2. Marking of roller shutters fastening.
3. Installation of roller blinds. The chain mechanism can be installed from any convenient side.
4. Assembling the brackets.
5. Bracket attachment markings. To do this, you need to install them on the assembled roller blind, install on the window without fastening, mark the places for the adhesive tape with a pencil, remove the curtain.
6. Application of adhesive tape to the rear surface of the brackets, installation on the window.
7. Installing the guide string against sagging. It is attached to the “ear” of the upper bracket and curtain weighting compound, at the bottom it is fixed in the tensioner, which is installed on the frame.

The second method involves fastening to a stationary frame (not opening):

• First of all you need to mount the roller blind, assemble the brackets and install them on the reel. Then this structure must be fixed on the window in order to make the markings for fastening.
• Second step- fastening the brackets to the adhesive tape at the top of the frame and the string tensioner at the bottom. It is not necessary to pre-attach them with tape, but it is advisable to eliminate problems with subsequent drilling of holes for screws. After installing the guide string, the curtain itself is mounted into the mechanisms.

How to fix cassette tape?

You can install cassette blinds on your own. Before installation, you must read the instructions, make sure that the complete set is complete, prepare all the necessary tools: a screwdriver, drawing tools, screwdriver, drill, cotton pads or a small piece of cloth, degreaser.

When everything you need is collected, you can proceed to the first stage - degreasing the glazing beads. Then you need to remove the side covers of the box, lift it to the top of the frame, focusing on the guiding protrusions, drill the holes for the fasteners, fix with screws. You can use a screwdriver for this purpose, or you can perform the process manually with a Phillips screwdriver.

When the box is installed, you need to fix the covers on the sides. After that, you can glue the guide strips to the degreased frame. The guides should be several centimeters below the corner of the glazing bead.

Important nuances

Installation work on window decoration requires certain skills and experience, but if you want to try it yourself, you need to take into account some of the nuances and features in this work.

The installation of blinds begins long before the preparation of the work surface and the set of tools.

The first step in this process- a balanced decision about the type and variety of blinds, material, color and texture, depending on the functionality of the room. So, it is more advisable to choose vertical blinds for the living room that let in light, for the bedroom automatic electric roller blinds made of blackout fabric, and for the kitchen, where cooking smells and food combustion products constantly soar, plastic blinds that do not absorb grease and dirt.

The second important point Is the correct markup. A lot depends on it, including how easy the installation process will be. If all the features of the architecture of window openings are taken into account by specialists when ordering blinds from them, everything will go smoothly and easily without the help of professional installers.

It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, whether there is a risk of their deformation.

The installation of blinds must be carried out exactly with marking and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening - with or without drilling.

It is also necessary to provide for the type of control. For low windows, one of the types of mechanical direction is an excellent solution. Magnetic, automatic (electric) control with an electric drive is suitable for dormer and sloped windows, windows in the bedroom.

Are you tormented by the rays of the scorching sun through the windows? Is the room stuffy due to the constant light coming in? Choose the best protection for your windows from the heat - blinds!

Curtains and blinds are at war, and it is not uncommon for blinds to emerge victorious in this competitive battle. What are the advantages and disadvantages of blinds and the main differences between their types.

Blinds benefits

• the ability to adjust sunlight
• saving space
• ease of care
• rich selection of textures and shades

Types of blinds and their differences

• horizontal
• vertical

Horizontal and vertical ones consist of lamellas (separate strips, fastened together in a structure).

Pleated

This guard consists of 2 guides with a fabric in the middle. During operation, the fabric gathers in folds, opening the sash.

Roll

The principle of operation lies in the name, with the help of a mechanism the fabric is collected into a roll.

Cassette

Cassette cassettes were invented specifically for plastic windows, the cassette mechanism is attached to the window sash, if desired, the canvas is completely retracted inside.

In order for the blinds to serve you faithfully for many years, you need to correctly, accurately and securely fix them. Installation of blinds, although a quick process, requires some knowledge and experience.

The methods of fixing the blinds differ from each other depending on their type, the material from which they are made and the type of window. There are plastic and wooden windows. Also, the method of installation on a dormer and a non-standard window is slightly different.

The importance of correct measurement

You have already decided which blinds will decorate your window openings, it's time to take measurements. The design of the blinds have the correct geometric shape, therefore, the required distances should be carefully measured in order to avoid distortions. If you approach this issue carelessly, the mechanism will quickly wear out and fail.

Advice! Write down the size in millimeters, use an iron construction tape, check the width (or length) in different places of the opening.

If you are not confident in your abilities, invite a qualified master.

Fastening to the sash of the window

This type of installation is popular among the population, because gives you the freedom to open and close windows, takes up little space and looks elegant. Most often, horizontal blinds made of aluminum, wood or plastic are fastened in this way.

Fasteners can be carried out on self-tapping screws, as well as on special brackets. How to hang blinds on plastic windows, we will consider in stages below

Measurements: measure the dimensions of the window at several points. If these values ​​are different, choose the smallest one; if the difference is more than 5 mm, we recommend choosing a different method. The height of the leaf is equal to the height of the opening, and the width goes after minus 10 mm. Take into account the position of the handles and the control system, correct the measurements. Order your custom sizes in the workshop.

• if you will be fixing with special brackets, you need to degrease the surface. Another type of bracket is a clamp that snaps into place on an open door.
• if you chose the option with drilling, prepare self-tapping screws, they often come in the kit. Be careful, depressurization threatens the loss of thermal insulation properties.

Drill the necessary holes and install the curtain rod. Or glue a strip of double-sided tape to the mechanism block.

The next step is to attach the structure to the cornice. The last stage is a functional check.

Wall mount

Such a connection is also used quite often, and the fastening of vertical and horizontal blinds to the wall is carried out in the same way. The popularity of this method is due to easy installation, which can be done on your own.

Algorithm for installing blinds on the wall

Measurements. Such an installation is considered the simplest, and therefore it is easy to measure. Add 50 mm to the length of the opening and 20 mm to the width. If you want your blinds to be floor-length, measure the length accordingly.

Mark up with a pencil and a ready-made system. If the width of the opening is more than two meters, it is necessary to fix the cornice in at least three places, the distance to the extreme screws must be at least 10 cm.

Drill holes. The drill must be the correct size, long enough for the fasteners to be secure.

Fasten the bracket with self-tapping screws to the surface and insert the curtain rod into it.

The next stage is the suspension of the system and the control of work.

Fastening inside the window opening

Hanging up the structure and making measurements will not be easy. It is very important that the window is perfectly flat, otherwise the structure will be skewed and the view will be unaesthetic.

Do not forget to reliably find out what material the slopes are made of. Fastening to a fiberboard opening is not a reliable installation method.

Instructions on how to properly hang the blinds in this way.

• measurements. We measure the opening in several places, and subtract 2 cm from each side.
• we fasten the brackets with screws, taking into account the knowledge of the material of the slope, we hang the cornice.
• runners are put on the cornice, slats are attached to them.
• we check the operation of the system

Ceiling mount

Thus, you can attach the blinds to any ceiling. The steps for fixing to a concrete ceiling are the same as to a wall, except for the shape of the bracket. But how to hang blinds on a suspended or suspended ceiling is one of the frequent questions of users.

A special swivel bracket for attaching to a suspended ceiling snaps into one of the ceiling rails, further steps such as when installing to a wall.

It is not possible to attach the system to the finished stretch covering, think about it in advance. In the place where it is planned to install the cornice, a mortgage is made from a bar of the required size under the ceiling sheet.

After the installation of the ceiling, fastening is carried out in the same way as for a concrete floor. Only instead of dowels, special overlays are used.

Modern wooden frames have excellent thermal insulation, environmental and aesthetic properties, and are also good for allergy sufferers.

How to hang blinds on wooden windows, in the instructions below.

• we take measurements according to the type
• we carry out the markup
• install the bracket
• assembling the structure, checking the performance

Blinds have long ceased to be just protection from the sun, but have become an elegant addition to the interior. Fabric vertical blinds, replacing curtains or expensive ones with wooden slats, the choice is huge, as well as the method of their installation. We hope the photos of how to hang blinds will help you make the right choice, and the installation will not cause you any difficulties.

Photo blinds on the window

How to hang blinds? This can be done with your own hands, without spending money on calling the master. The blinds themselves are a unique device that allows you to hide from the rays of the sun and prying eyes. In principle, the fastening is not difficult, but it differs directly by the method of hanging the canvases on the windows, including both the technical and design components. Initially, you need to figure out what types of blinds exist in general.

Varieties of blinds

There are two broad categories of blinds:

• vertical products;
• horizontal analogs.

The latter can be mounted inside the frame, the difference is that the structure must be attached exclusively to the frame. Also, horizontal blinds can be mounted over the frame. Then it is possible to mount the product either to the frame or to the upper slope. In the latter case, it will be necessary to create holes. But to attach the product to the frame is easy. You will need to use ordinary screws or you can give preference to linings that are sold in specialized stores.

In addition, there are different types of horizontal blinds. Features of each type of blinds, including vertical ones, are shown in the table.

	Peculiarities
Vertical	The fastening of such products should be carried out above the window opening (usually fixed directly to the ceiling). Long models are often used as an alternative to curtains.
Horizontal	Such designs are considered the most common. Their fastening is possible in three ways: on each part of the frame separately; inside the window; outside - on the sashes or on the window itself.
Roll	Such products are gaining more and more popularity. Their attachment can be done in one of three ways: using self-tapping screws; by means of brackets; using adhesive tape.
	This is one of the newest types of blinds made from thick paper. Plisse can be hung exclusively from inside the house in front of the window surface.
Thread	Delicate products should be fixed exclusively in the upper part using a special rail. You can hang curtains exclusively from the inside in front of the window opening.
	This type of structure looks impressive, but caring for it is quite difficult. Products are made of dense fabric, and fastening is carried out directly to the frame or above it by means of brackets. Attention! The price of such products is somewhat higher than analogues due to the naturalness of the material.

It is important to understand that you will not be able to attach vertical structures directly to the frame. Here, fastening is possible exclusively by drilling. In general, the only difference between vertical blinds is their length. There may be standard models, the length of which corresponds to the length of the transparent part of the window, or even the length to the floor, which resembles classic curtains.

In accordance with the characteristics of the products, there are also different types of fasteners.:

• inside the sashes (it is suitable for fixing horizontal interframe blinds);
• to the ceiling or to the wall under the window (the method is relevant for vertical blinds);
• overlay on the sash, no drilling required (this way you can fix all types of horizontal blinds);
• to the upper slope, drilling is necessary (the method is in demand for attaching any type of blinds, with the exception of interframe and attic blinds).

What is necessary?

Everything that is needed should be prepared in advance so as not to be distracted later. First, you will need a drill and drill (it is recommended to be guided in the choice by the type of walls). You also need to choose brackets and a socket wrench if you plan to mount it overlay. Further, the tools are standard for all fastening methods:

• ordinary pencil;
• a screwdriver (a Phillips screwdriver is required), it can be replaced with a screwdriver;
• roulette.

The tools are the same regardless of where the blinds will be mounted, for example, on a balcony, on aluminum or wooden windows. It is recommended that you additionally familiarize yourself with the diagrams that allow you to more accurately understand how the hanging is performed correctly, for example, “Day-Night” blinds or fabric analogs.

How to hang vertical curtains?

How to hang vertical curtains? There are two ways:

• directly to the ceiling;
• over the window using the wall bracket.

The principle of fixing to the ceiling assumes the following algorithm:

1. The clips must be attached to the ceiling surface. In this case, work is carried out at such a distance that subsequently the battery is completely closed.
2. The cornice must be attached to the clips. This requires a little effort until you hear a characteristic "click".
3. Next, it remains to close the slats into the runners, waiting for a characteristic click. Remember to make sure all strips are securely attached.
4. Next, you need to insert weights into special pockets from the bottom of the lamellas. In this case, the weights should be positioned so that the “eyelet” is at the top.
5. The strips need to be fastened with a chain. This will eliminate the scattering of the lamellas, for example, in a draft.

The blinds are now fully assembled and ready for use. If everything is done correctly, the windows will be aesthetically pleasing.

Fastening of structures of horizontal and roll type

Recommendations for fastening structures of roll and horizontal type will allow you to do this work correctly. The procedure assumes the use of suitable brackets. With their help, it will be possible to fix roller or horizontal curtains on windows of any type, including inclined ones.

So, the instructions for installing horizontal curtains are as follows:

• attach brackets at the top of the sash;
• place the corners at the bottom;
• place the cables in the bushings;
• using springs, secure the bushings, placing the products along the edges of the cornice;
• pass the cord through the slats;
• place the corners at the bottom of the window;
• mount the handle;
• make sure the structure is working properly.

It is also easy to fix the roll structure:

• the brackets are fixed with self-tapping screws on both sides of the window;
• a latch is installed on the pipe;
• then insert the finished structure into the bracket;
• now they hang a weight from below;
• the adjusting cord is fixed under the cover.

What else to consider?

It is important to know what else to consider before buying and installing a product. In particular, you need to correctly measure the window opening before purchasing blinds. To select vertical blinds, you need to measure the width of the window and add 20 cm to the resulting value, 1-2 cm are subtracted from the height.To select the blinds that are attached to the window slope, you need to subtract 2 cm from the measured width.

If you plan to hang products on the sash, you need to measure it differently. In particular, you need to measure the width from glazing bead to glazing bead (the width of glazing bead should also be taken into account). The measurement of the height depends on the method of subsequent fastening.

Important! It is recommended to recheck measurements at several points. This will eliminate the possibility of error. It should be borne in mind that you can neither increase nor shorten the lamellas, therefore, the finished product will depend on the initial data.

1. Before ordering blinds, find out what exactly is included in the kit for the indicated price. In some cases, the price includes only the canvas, and the components must be purchased separately.
2. If you find defects, immediately contact the company for replacement.
3. Curtains should be used carefully so as not to damage the product.
4. Pay attention to the lamellas during installation. If they move smoothly, then the product will serve for an extremely long time.
5. Consider the material, focusing on the room where the blinds will be located.

It is quite possible to hang the blinds with your own hands. There is no need to call professionals. It is important to follow general guidelines and use the right tools. However, if there is a possibility of damage to the product, it is best to entrust the work to specialists.

A decade ago, blinds were considered exclusively office window decoration. But recently, the lamellas have changed, new design options have appeared. Designers began to use bamboo, linden logs, cherries and fabrics as production materials. It has become fashionable to select models for the arrangement of houses, apartments and public spaces. Turning to a salon or a specialized store for help, you will receive competent advice from a sales consultant for installation, care and selection. In the event that you are going to install blinds on the windows with your own hands, read our article in detail.

You need to know this in advance before installing!

To make the blinds last a long time, try to carefully install them. If you understand the details in advance, the installation process will not take long. The main thing is to take into account the model, the installation method and take this into account in the assembly. If you will be attaching window blinds directly to the wall, you need to make sure that its surface is perfectly flat.

An important point! When buying, be sure to check with a consultant whether all the parts of the mounting headset are included in the kit. There are situations when the purchase of additional mounts is inevitable. Better to take care of this in advance.

Blinds can be attached in one of four ways:

• to the ceiling;
• to Wall;
• inside the window opening;
• for each window division.

Which option you choose doesn't matter. It all depends on the individual preferences of the client. Installed on double-glazed windows of various shapes. But the method of fastening is selected individually. The sequence of steps is roughly the same, but there are some distinctive details.

Universal step-by-step steps for installing blinds

1. Many are convinced that the models are selling standard size and neglect to pre-measure the window. . We want to warn you: take your time, measure the height and width of the window opening.
2. Be sure to keep in mind that the length of the lamellas should be two centimeters shorter than the length of the window. If you provide for the option of attaching the structure to the wall, then the canvas fifteen centimeters on the right and left should cover the window.
3. Next, mark the mountings. Make sure that there are no difficulties with the operation of the mechanisms, and they will easily allow you to open the window.
4. Referring to the markings, attach the necessary parts to the base. Dowels and screws are screwed into the wall or ceiling. Sometimes directly into a double-glazed window. Next, a cornice is hung on them, which holds the structure.
5. As soon as you finish installing the blinds, check their mechanism.

Installation of blinds on plastic windows

Installation of blinds on plastic windows is a frequent phenomenon. Most modern insulating glass units are made of plastic. This is a fragile material, so you need to work with it carefully. Now we will consider the installation options where drilling is used:

We mount vertical blinds on plastic windows

This is one of the common types. Functional features, wide color palette, ease of care and color combination attract buyers. Therefore, it is common in offices and public organizations. Installation of vertical blinds will not take long.

1. It is necessary to make markings for fastening the elements.
2. Next, attach the brackets and cornice.
3. Put the runners on the cornice, attach the slats to them one by one.
4. Attach weights to the control handle.
5. Check the work of the structure.

Mounting scheme for vertical blinds
For a detailed introduction to the installation instructions for vertical blinds, watch the video below:

We mount horizontal blinds on plastic windows

In most cases, the horizontal slats are attached to the wall. They are able to close the window opening completely, but at the same time they look aesthetically pleasing and do not "squeeze" the space of the room. There are times when they are mounted to the window. Here, the lamellas are attached to each sash separately. The installation system for horizontal blinds does not differ from vertical options:

1. We mark the places for fastening.
2. We fix the brackets.
3. We put on the cornice on the brackets.
4. We check the length.
5. We check the installation and operation of the mechanism.

Mounting scheme

To make sure the steps are correct, see the instructional video for installing horizontal models.

We mount blinds on plastic windows without drilling

If for some reason you do not want to drill a wall or glass unit, you can use tape or special brackets. There are L-shaped brackets that are attached to the surface of the glass unit without drilling. They are easy to mount and dismantle thanks to a simple latch. But, they are attached only to those doors that open. To attach the brackets to a closed sash without drilling, use double-sided mounting tape.

Thus, with the help of L-shaped brackets and adhesive tape, the integrity of the window profile can be preserved. Mounting on tape is less reliable than others, but if you do not overload the structure, it will last a long time.

Mounting on brackets

We mount roller blinds on plastic windows

Roll-up models are installed in almost the same way as vertical ones. One of the most affordable options for installing blinds is on two brackets, which are fastened with self-tapping screws.

1. We make markup for details.
2. We attach the brackets to the self-tapping screws (while making sure that they are at the same level, otherwise the blinds will hang crookedly).
3. Next, we attach the cornice with the canvas.
4. We check the work of the structure.

Mounting scheme for roller blinds
For more details on the nuances of installing roll models, check out this video:

Installation of blinds on wooden windows

Modern models are attached to wooden euro-windows and old Soviet ones. It should be noted right away that when installing on old-style windows, you need to carefully take measurements.

Please note: glazing bead on Soviet wooden windows should not protrude beyond the plane of the frame!

Suitable models for wooden windows are: Isolight, Isotra, Rolled and Rollight. These are universal models. They fit harmoniously into the interior design, regardless of its style. They are distinguished by a simple control mechanism and high performance indicators.

One of the most difficult installations for wooden insulating glass units is fastening to each section. All the necessary parts are included in the headset. Installation principles, as for plastic: using brackets or screws. If you are not afraid to make a hole in the glass unit, you will be happy with the result. With the help of fastening to screws, the structure will serve for a long operational period.

Mounting on brackets is considered less reliable, but it has a huge plus - no holes in the glass unit. When you want to remove the blinds, there will be no defects on the window.

We install blinds on wooden windows

Let's take a closer look at the option using drilling and fastening to screws.

1. First you need to make a markup for each of the fastening elements.
2. Make sure that the structure does not interfere with the opening of the window sashes.
3. Make holes for the screws. Install screws and dowels.
4. Attach the cornice to them.
5. Install another fastener at the regulating thread to relieve the structure from the accumulation of stress on that area.
6. Attach runners and slats to the eaves.
7. Check the work of the structure.

Using self-tapping screws, it is easier to attach the cornice to the window. Self-tapping screws will not harm the window profile, but work carefully during installation. If you want to remove the lamellas after a while, no problem. After dismantling the structure, the holes are filled with special white silicone glue - and not a single trace of the screws will remain.

Good to know! For a start, it is better to drill holes according to the marking, and then mount the parts. Screwing in the screws individually is one of the reasons for the appearance of a crack. And this method of installation guarantees the integrity of the plastic.

When the holes are prepared, the brackets are carefully screwed to them. Then the cornice is installed and closed. Next, you need to do the following:

1. Install the hook in the control mechanism.
2. Install the cane.
3. Attach the tip to the reed.
4. Secure the thread with a knot.
5. Check the operation of the blinds.

It is not difficult to install the lamella structure if you follow all the requirements and work carefully. Also read the installation instructions, which are necessarily included with any model.