The execution of any actions assigned by the game participants are carried out by command blocks. You won't be able to create such a team while playing survival mode. It will also not work to summon them as tools while using the creative game mode. In order to functionally obtain such blocks, it is necessary to apply a couple of fairly simple commands, which, in fact, will allow them to be called. Let's look at a few simple methods.

Get a Command Block in Minecraft: Method 1

Launch Minecraft and select single player mode. Perform the creation of a world in which cheats are enabled.

Open the chat window and press the "/" key. This symbol will open a window where you can enter commands.

Enter the destination you want by choosing from the following lines:

• "/give" the name minecraft:command_block and the desired number - after entering it into the console, the summoned items will appear among the tools;
• "/setblock x y z minecraft:command_block" - this line turns one of the blocks into another, making it a command block, and to find it, you need to press F3 and select one of the found ones;
• "/summon Item x y z (Item: (id:minecraft:command_block, Count:1))" - by entering this sequence, the player will summon the blocks to the place he needs.

Get a Command Block in Minecraft: Method 2

Run the game, select single player mode. Log in to an existing world, possibly a server. Enter the chat required to set commands by pressing "/".

Enter one of the suggested options:

• "/give name minecraft:command_block required number" - this line allows you to call the required number of items and add them to your inventory;
• "/setblock x y z minecraft:command_block" - if you enter such text, you can replace any existing block with a command block, and to determine the location in which it is located, you need to press the F3 key;
• "/summon Item x y z (Item: (id:minecraft:command_block, Count:1))" - blocks will appear on the specified area.

Get a Command Block in Minecraft: Method 3

• Use the "E" key to drag the block and place it on the panel. Click on the right mouse button and place the item on the ground.
• Click on it again with the same mouse button. This will open a menu where you can configure actions.
• In this box you need to enter the symbol "/". The options for these blocks are similar to those used in chat. They are sometimes connected to the electrical board. This allows commands to be executed automatically.
• Press the "/" key, a console window will appear, in which write the word "help". After it, type the name of the subject to which the sequence of commands is prescribed.

A command block is a cell in which you can enter various commands. The block itself starts the task when it receives a signal from the red stone. This block expands well when creating maps in minecraft, or where there is a right to seize some part or territory. The use of such a block is simply necessary in some game situations when everything can depend only on you. And the commands that you can enter can save others or protect you in this pixel world.

So let's see how to do command block in minecraft 1.8.9 without mods. I want to immediately upset that the command block is simply impossible to do. But it is possible to get it, since the administrator of the server manages it. Or the player himself in single player mode. To get it, you need to drive /give Player command_block . The player value is the name of the player who needs this block.

After we learned how to make a command block in minecraft 1.8.9 without mods, we need to figure out how to write the command itself into it. To do this, you need to open the command block, and this is done using the mouse button. Right click on the block. Next, a window appears in which the command itself fits. By the way, a little lower there is a log line in which you can conveniently monitor the results of the executed commands, as well as errors that could occur.

In order to explore the entire list of available commands, you need to type /help in the chat window.

Using a command block will obviously make your game and work in it easier, because with such a block you can perform many actions by writing the necessary commands into them. Also, depending on the type of game, some privileges are possible for you, since you are able to reward your comrades, or yourself. Also, the distribution of commands can be adjusted to those who are nearby, to a random player, to all players in the world, or to all entities that live throughout the map.

When creating any playable map that will be different from randomly generated areas, construction, pixel art or story scenarios, the server administrator cannot do without the use of "built-in" functions. To implement them, you can use a command block. This is a special device into which you can record a system command, starting from the player receiving a resource and ending with his teleportation to a specified location. But how do you give yourself a command block?

A warning

There are only two ways to purchase this item. Both of them are that you will need to use system commands. This comes from the fact that it is impossible to make (craft) improvised materials. That is why the question: "How to give yourself a command block?" - is always up to date. No matter what mods you put on yourself, no matter how you experiment with the ingredients, nothing will work out for you. Anyone who claims that by downloading his mod you can create command blocks is a scammer who seeks to "plant" you with a virus. So how do you give yourself a command block?

Ways

The first method of obtaining a command block is that you can create a map in "creative" mode. The Command Block will be available to obtain among other items.

The second method is a little more difficult. To do this, you will have to use How to give yourself a command block using the system? To do this, you will have to open a chat and write the following: /give [name :command_block [number]. Also, this command will be the answer to the question of how to issue to another player.

All syntax is written without brackets. Instead of the character's name, you must specify the nickname of the desired player, the number is the number of command blocks received. By the way, the main condition for this command to work is the permission to use cheats. If this feature is disabled, you will not receive this item in either single player or multiplayer.

Application

So, let's say you figured out how to give yourself command block, and it is in your inventory. Now let's learn how to use it.

To place a block on the ground, drag it to the hotbar. Then select it and click on right place. At this moment, the control interface will open in front of you, with the help of which we will enter the function. It should be noted that one command block can execute only one instruction.

However, it is not always necessary for the player to be able to find a command block and use it. It is much more interesting that the user can press the lever, and a mountain of gold or the necessary items appears in front of him. In such a case, you can use redstone schemes.

Teams

In order to use the command block, it is not enough to know how to get or install it. The most important thing is to be able to correctly prescribe the syntax of the instruction. To do this, it is important to remember a few simple rules.

1. The command itself is written first. Any function that is activated using the console can be written here.
2. Then the "area of ​​application" is set. That is, the player to whom the effect or the coordinates of the appearance of the item will be applied.
3. And, finally, additional arguments to clarify the characteristics of the object.

In general, the command will look like this.

/[command] [player nickname or coordinates] [options]

To make it clearer, let's take a look at a few real examples. Let's start with how to issue items with a command block.

/give @p iron_ingot 30

Using this instruction, the command block will give the nearest player within a radius of 10 blocks iron ingots - 30 pieces. Now let's see how to work with coordinates.

/spawn 10 20 30 /summon EnderDragon

Actually, from the syntax it is already clear that the command calls for a dragon at certain coordinates. Finally, we note that full list The commands used by the command block can be seen by typing /help into the chat.

The same commands as in regular chat. What is a command block, how to get it and how to use it? In this article we will tell you about it!

This is really a very useful block and it expands the possibilities of creating maps in minecraft

You can find a complete list of commands on, but not all of them work in Minecraft on Android, IOS and Windows 10 versions.

+ command blocks in MCPE:

• Unlike the PC version, in PE command blocks do not do heavy loads, i.e. the FPS will be stable.
• The command block interface is adapted for mobile devices.

- command blocks in MCPE:

• Too little functionality.

How to get a command block?
In the game, you cannot get a command block by crafting, but it can be issued using the command /give Steve command_block, where Steve nickname of the player to whom the team will give this block. Instead of Steve, you can also use @p, i.e. you will give the block to itself. Don't forget to enable cheats in the world settings.

How to enter a command in a command block?
To do this, you need to open its interface. This is very easy to do, just tap on it. In field Command entry enters the command itself, which will be executed by the command block. A little lower is a field in which you can see an error if you entered something wrong.

Command examples:

• give @p apple 5 - Gives the player five apples.
• setblock ~ ~+1 ~ wool - places a block of wool at the player's coordinates.
• tp Player 48 41 14 - the player with the nickname Player moves to the point at coordinates x=48, y=41, z=14

Who do command blocks work with?
Thanks to pointers, you can point to the player or creature on which the command will be executed:

• @p is the player who activated the team.
• @a - all players.
• @r is a random player.
• @e - all entities (including mobs).

Auxiliary pointers:
And how to make it so that, let's say, it moves all the players to some point, except for itself? Yes, it's easy, for this you need to use additional pointers, for example: tp@a 228 811 381- teleports all players except the player with the nickname Admin exactly x=228, y=811, z=381. All options:

• x - coordinate along the X axis. If you put instead of the value ~
• y - coordinate along the Y axis. If you put instead of the value ~ , then the dot will be the command block.
• z - coordinate along the Z axis. If you put instead of the value ~ , then the dot will be the command block.
• r - maximum search radius.
• rm - minimum search radius.
• m - game mode.
• l - maximum level of experience.
• lm - minimum experience level.
• name - player's nickname.
• c is an optional argument to @a that limits the number of players to execute the command. For example, if you enter @a - then the command will act on the first five players from the list, @a on the last five from the list.
• type - as an example, /kill @e will kill all skeletons, and /kill @e will kill all non-player entities.

Command example:

• give @p gold_ingot 20 - Gives the nearest player within 10 blocks 20 gold bars.

Command block modes

There are three command block modes available: pulse, chain, and repeat - the color of the block changes depending on the mode.

• Pulse mode (orange): activates the given command
• Chaining mode (green): the command will work if the block is attached to another command block and connects to other command blocks
• Repeat mode (blue): The command is repeated every tick as long as the block has power.

Pulse mode
These are ordinary command blocks that are used to interact with chain blocks, but you can also execute commands simply in these blocks.

Chain mode
I think that already from the name it is already clear that this command block mode works according to the “chain” scheme.

Please note that for the chain type to work, you need a pulse command block, which will send the signal, as well as a redstone block, without which the chain type command block will not work.

Command title and its parameters:

• title clear - clears messages from the player's screen.
• title reset - clears messages from the player's screen and resets options.
• title title - the title that shows the text on the screen.
• title subtitle - the subtitle that is displayed when the title appears.
• title actionbar - displays a caption above the inventory.
• title times - appearance, delay and disappearance of the text. The default values ​​are 10 (0.5s), 70 (3.5s) and 20 (1s).

Command execution example:

• title @a title §6Start - title with orange color.
• title @a actionbar Hello! - Displays text above inventory.
• title @a subtitle Chapter 1 is a subtitle.