Wall dryer for the bathroom. Wall-mounted clothes dryers (48 photos): sliding, stationary and other options

The washed clothes need to be dried somewhere. The owners of private houses will calmly stretch clotheslines on their site for this purpose, and residents of high-rise buildings will use the loggias. But what can the happy owners of apartments on the first floors, where there are no balconies, do, and it is rather dangerous to leave their belongings on the street for a long time unattended.

This is where special clothes dryers come to the rescue, which are quietly placed in the bathrooms. In fact, such equipment will not hurt every owner to have, since it is inexpensive, but it allows you to cope with the mentioned task in cases where the balcony space cannot be used, and it is raining outside. Next, I will acquaint you with such a device in more detail.

A little about motivation

To begin with, I still want to dwell in a little more detail on the benefits obtained from the use of clothes dryers in bathrooms:

  1. No need for a free balcony.

But the following situations may take place:

  • He does not exist at all, not that free;

  • It is used as a pantry, and old skis will not be the best neighborhood to washed clothes. Yes, and it will be inconvenient for you to hang something there yourself;

  • It is equipped as an office. If your computer or other electronic equipment is dear to you, then it is better to keep sources of moisture away from it;

  • You are expecting smoking guests. Where will they go to smoke? That's right, on. And people do not need to admire your linen, which will also interfere, but the linen itself should not be soaked in tobacco smoke;
  1. Security... You can also often find stretched clotheslines near high-rise buildings. But this means that, in fact, any passer-by will be able to remove the things you have hung out and take them home. This, of course, does not apply to private plots, they are guarded by a strong fence, and sometimes even an angry dog;

  1. Ability to dry even in rainy weather... This again applies to the use of street clotheslines and "hits" even the owners of their own fenced land, as the rain fences and angry dogs do not care.

Varieties

So, what types of dryers can effectively replace loggias and outdoor clotheslines? Now I'll tell you everything:

Substitute # 1: wall dryer

As the name implies, here we are talking about a structure that is attached to the wall and can have two interpretations:

  1. Rope... Represents ropes stretched over the bathroom from one wall to another, similar to those that are hung on the street.

In turn, it can also be of two types:

  • Stationary- two straps connected by linen cords. The price of such products is the lowest and practically will not "hit" your family budget in any way;

  • Removable- a spring-loaded drum on which the ropes are wound, and a retractable bar with their other ends. The first part is fixed on the wall using dowels and self-tapping screws, and the second hooks onto the pre-installed rings opposite with hooks. When the hooks are removed, the mechanism twists the cords back;

I recommend buying the curl model only if you really plan to use this feature. The fact is that standing on the edge of the bathtub in order to unfasten the hooks is not very convenient and rather time-consuming. In this regard, most users simply leave the ropes unfolded, thereby overpaying extra money for the presence of an unclaimed mechanism.

  1. Foldable... It is even easier to install such devices with your own hands than those described above. Here it is enough to attach the main panel to one of the walls above the font using the same screws and dowels. Then a structure of metal or plastic strips, similar to an accordion, is pulled out of it, which is hung with wet linen.
    The main disadvantage of such a system is that, due to the lack of a support for the second edge, it will not be able to support significant weight, so for a large family it is better to purchase a rope or ceiling sample, which I will discuss below.

On the shelves of specialized stores, you can find the following models of wall dryers:

  • Model "Gimi Brio Super 120":

  • Rollquick 210 83006 model:

Substitute # 2: ceiling dryer

This type of dryer fits perfectly in the bathroom for the bathroom.

It includes:

  • Two brackets, which are fixed to the ceiling surface with dowels and self-tapping screws;
  • Several rods... The linen is actually hung on them;
  • Ropes, lowering and lifting rods. In some models, the rope system has an additional attachment to the wall.

As a result, we can talk about the following advantages of this design solution:

  • Save space... If you do not need to dry your clothes, then you simply lift the crossbars up to the ceiling;
  • ... The vertical mount is capable of supporting a noticeably heavy weight;
  • Convenientinstructionexploitation... You just need to lower one crossbar, hang it with the necessary linen, among which there may even be a large duvet cover, and then simply pull on the rope, sending the wet fabric to the ceiling. The main convenience lies in the fact that you do not need to reach up with your own hands, all manipulations take place right in front of you;
  • The ability to dry items that cannot be folded... You can lower all the barbells to one level, which as a result will give you a comfortable table on which a woolen sweater or other whimsical thing in this regard is perfectly located.

In general, I personally purchased and installed just such a dryer in my bathroom. But everyone is free to make their own choice.

In the process of shopping, you may come across such representatives of this equipment:

  • Model "Gimi Lift 180":

  • Luminarc 1.4 m model:

Substitute # 3: battery dryer

A fairly convenient option for those bathrooms that are heated I am. Wet things will just be in close proximity to the heating element, which will greatly speed up the drying process.

The main disadvantage of such structures is their small area and, accordingly, the carrying capacity. So, for example, drying a sheet on a structure attached to a heating radiator will be very problematic, if not to say that it is completely impossible.

Installation in this case is quite simple: the product is simply thrown with hooks on the battery, and the rest rests against it. After use, it is removed and hides away from the eyes.

Substitute # 4: hot tub dryer

Another controversial device, which is a set of tubes and support legs, which is placed directly on top of the bathing tank.

The advantages of such a device:

  • Saving usable space of the bathroom itself... That is, you can move freely around the bathroom;
  • Ease of operation... Here, as in the previous two cases, you do not need to reach anywhere, all the linen bars are right in front of you;
  • Large enough capacity... In this case, there will be no problems with the duvet cover.

Minuses:

  • Large dimensions that cause inconvenience at a time when the dryer is not in use, because it must be hidden somewhere else so that it does not interfere;
  • Impossibility to accept water procedures in the font itself during the operation of the structure.

And here's what you can find in stores:

  • Model "GIMI Alablock":

  • Model "GIMI Varadero":

Substitute # 5: floor dryer

In fact, this is a folding table, which during operation can be placed not only in the bathroom, but in general in any room of your house or apartment... Its use does not foresee any installation work.

In the process of finding a suitable instance, you may come across the following options:

  • Model "Gimi DUPLO":

  • Leifheit Roma model:

Conclusion

There is no balcony and is it dangerous to hang out the washed laundry on the street? There is a way out: get one of the types of dryers installed in bathrooms, and then your things will dry, without disturbing anyone, and at the same time will be completely safe, being under your vigilant supervision. Moreover, there are enough types of such structures to choose the most suitable one.

The video in this article will provide you with additional information for your reference. If, suddenly, you have any questions on the topic, then ask them in the comments.

The process of drying clothes in the bathroom is simplified and made convenient by various models of dryers for the bathroom, which can fit into any interior without violating the overall design concept.

Existing models of dryers

The modern range of clothes dryers for the bathroom is very diverse. There are also compact specimens for drying small things, and very roomy folding-type models.

To choose the right model, you need to take into account several nuances so that it harmoniously fits into the dimensions of the room and design.

Floor models

Such drying structures, which are installed on the floor in the room, are very convenient. Indeed, at the moment when you don't need to dry anything, they are removed to a secluded place and do not affect the appearance of the bathroom.

Floor-standing "clamshell dryers" are suitable for those who do laundry a couple of times a week, and have a spacious bathroom, where the drying could fit in an unfolded form.








Vertical floor models are the most compact, assembled easily fit in the corner of the room. These models are suitable for those who hang out well-wrung clothes to dry so that no drops fall on the lower floors.

Wall models

Drying in a wall-mounted bathroom, due to its size and mounting method, does not take up much space, moreover, it turns on and works quite quickly.

However, it will not be possible to place a large number of things on it. These designs are suitable for families where washing is done in small batches and often.

Ceiling dryer

Modern models have replaced the usual clothesline for drying clothes in the bathroom. Today they are represented by stationary models and folding structures.







If you use such a structure, then even very wet things, from which droplets of water drip, can be safely placed for drying.

The only drawback of ceiling models is the limitation of the possibility of using the bathroom during the drying process.


Choosing a laundry dryer

In addition to the shape of the product itself, it is imperative to pay attention to the materials of manufacture. Since the humidity in the bathroom is increased, and the crossbars are constantly in contact with wet linen, therefore, all components and fasteners of the drying must be resistant to corrosion.

One of the most durable is stainless steel. It is better to choose aluminum dryers for the bathroom when they will be used for drying light things.








Quite often there are models made of steel, which is protected by a layer of enamel or powder types of dyes. But such specimens are short-lived, since the enamel elements are covered with micro-cracks and deteriorate.

Inexpensive and small-sized models of dryers can sometimes have plastic elements. However, you should not count on a long service life.

Going to the store for a clothes dryer, you should take a tape measure. First of all, it will help you find out the dimensions of the product up to a millimeter, and also allow you to calculate the distance between adjacent crossbars, which is less than 60 mm. Alternatively, things may come into contact during drying, staining each other and increasing the drying time.

Electric dryers

For those who do not like to wait a long time for dried clothes, electric models are suitable. On such structures, small things dry in 40 minutes, while bulky sleeping sets and blankets dry from 2 to 4 hours.








When purchasing such a dryer, you should take into account the power, which should not be less than 70 watts.

It is also better to choose models with temperature control so that you can dry things made of light delicate fabrics on them.

Unusual modifications of dryers

Designer linen dryers will not only cope with their direct responsibility, but also be able to decorate the interior of any bathroom.

For small bathrooms, you can use compact models that imitate windows.

You can choose any color of such a frame. For drying small knitted items that are washed without wringing out, you can purchase a small cute model of a dryer that is installed on a bathtub.

For hi-tech lovers, there are specimens located above the bathroom and controlled by a remote control. Such dryers are automatically moved.

Photos of bathroom dryers show that today it is easily possible to choose models that will meet all the requirements and external characteristics.

Photo of the dryer in the bathroom

Every housewife knows that drying the washed laundry requires a free area of ​​several square meters in a room with dry air. Finding such a space in a small apartment is difficult. The speed of drying clothes on a balcony or loggia directly depends on the weather conditions. In addition, the appearance of linen drying in full view of passers-by gives the impression of cramped living conditions. Tumble dryers are expensive and require extra space in the bathroom. A practical and budget option is a tumble dryer for the bathroom.

Types of clothes dryers

Household dryer manufacturers offer a wide variety of dryer options. They differ from each other in the following characteristics:

  • installation method;
  • constructions;
  • the ability to move;
  • area required for drying the laundry.

The size and design of the selected model depends on the volume of one load of the washing machine. If the washing machine is compact and its maximum load does not exceed 4 kg, then you can choose a wall-mounted product, a model that is installed on the sides of a bath or on a heating radiator.

For small apartments, there are options for wall and ceiling dryers that allow you not to clutter the balcony with drying linen.

Floor standing

Such models are convenient in that they can be transferred from one place to another. This property allows you to choose a room with a low percentage of humidity or with good airflow for drying laundry, in order to influence the processing speed. A large number of strings allows you to hang a lot of clean laundry.

Classic floor dryers when unfolded take up a lot of space, and if space permits, you can purchase this easy-to-use model. For small apartments, there are compact versions of rack dryers, which, when unfolded, are removed into the shower stall.

The material from which the dryers are made determines the durability of the product. A hanger made of wood and steel is considered to be durable. Such a product will withstand a large weight of damp laundry. Plastic and aluminum models are designed for light loads, therefore they are not considered durable.

Wall mounted

When choosing a wall-mounted dryer for clothes in the bathroom, you need to find out what the types of their designs are:

  1. Folding console with the connection of the side elements in the form of an accordion... Depending on the modification, such a hanger can consist of 5-10 sections for drying things. It is cantilevered on the wall and can hold up to 5 kg of damp laundry.
  2. Rope with string tension regulator... This option is an improved alternative to clotheslines from the Soviet past. The design of such a dryer is laconic, the regulator allows you to prevent sagging of the ropes.
  3. Inertial foldable... This is a variation on the previous model and allows drying lines to be installed only when needed. The design consists of a reel suspended at a convenient height with ropes wound around it, fastened to the opposite wall with clamps. This hanger can carry a load of 5 kg.
  4. Telescopic with the movement of the rods along the guides... The size of such a model should be chosen in accordance with the dimensions of the bathroom, so that the guides can be attached to the walls. If the length of such a hanger is less than the size of the bathroom, the guides will “hang in the air”, creating a hindrance.

Suspended

The Ceiling Dryer is the most requested model among buyers due to its space saving, ease of use and durability. Compared to rope, this design makes it possible to place linen at a comfortable height at shoulder level, and after hanging the rods with things, they can be raised to free up the useful area of ​​the bathroom. These models are called creepers.

Liana, as a recognized leader, is suitable not only for apartments with high ceilings, but also for small rooms, since it allows drying clothes at a level higher than a person's height.

The bath dryer is small and can be used as an additional place for damp laundry. Since the humidity in the bathroom is always high, it is necessary to find out whether such a hanger is provided with protection against corrosion.

The dryer, which is installed horizontally on the bathtub, will allow you to dry delicate knitwear that cannot be wrung out after washing. When choosing such a model, you need to know exactly the size of the bath bowl.

Electrical

Electric dryers are a suitable option for a family with small children and for those who have little free time. Even jackets, blankets and children's soft toys dry quickly on these dryers.

The range of electric hangers includes floor, ceiling, wall models. Some ceiling modifications for ease of use are equipped with built-in lamps and a hairdryer for ventilation.

Wall-mounted options significantly save space and do their main task well, even if they are small. Floor dryers come in the form of whatnots, racks with covers, transformers.

The latest technical innovations are represented by models with remote control, variants with a timer and the ability to determine the drying mode.

Sliding

Such hangers are compact models that can significantly save space in a small apartment. The length of these dryers ranges from 50 to 120 cm, and the width is significantly reduced after the end of the processing of the laundry due to the possibility of folding. Such products can be made of metal or wood.

Folding

These models can be used both for drying clothes and as towel rails. Foldable dryers are a folding design suitable for use in the smallest bathroom.

Pros and cons

Any model of the dryer has advantages and disadvantages that are worth considering in detail:

  1. Floor fixtures do not require permanent fixing, their installation is not difficult, they can accommodate a large amount of drying laundry. The disadvantages include the need to allocate space for installation and storage when folded.
  2. Wall mounted dryers are easy to use and do not take up much space... The disadvantage is the need to perform complex assembly work to install the dryer. The support brackets are secured to the wall with reliable fasteners. The disadvantages include the ability to withstand light loads.
  3. Ceiling dryers allow you to use the bathroom and dry your laundry at the same time. They are easy to use and durable. The disadvantages include their complex installation to the ceiling and the process of assembling the product, in which it is difficult to pass the lace through the roller and the control unit for the movement of the rods. Before fixing the rollers located on the brackets, holes must be drilled in the ceiling corresponding to the marks on the holders. This will help to avoid mistakes in the installation of the hanger.
  4. Electric dryers. Despite their main advantage - a high drying speed - this household appliance has significant disadvantages:
    • the need to observe safety when choosing an installation site and further operation;
    • additional electricity costs;
    • high price;
    • not suitable for drying certain types of fabrics.

When choosing a clothes hanger, you need to take into account the volume of one load of the washing machine, the size of the place for installation and use, the material of the product, the quality of the connecting fittings and additional fasteners.

Before choosing a suitable model, it is worth exploring additional nuances:

  1. Before buying, you should pay attention to the distance between the strings or rods on which things will dry. On a construction with strings less than 7 cm apart, the laundry will stay damp for a long time.
  2. The material of the surface of the rods is another indicator of the quality of the product, because stains from them should not remain on the linen. The laundry will always be clean after drying on wooden and metal rods with an enamel or galvanized coating.
  3. The presence of installation instructions, product configuration, information about the manufacturer indicate a high level of quality of the selected model.

How to make a dryer with your own hands

If the accessories for the bathroom sold in stores do not fit in terms of overall dimensions, design or price, you can make a clothes dryer yourself.

Stretch hangers, which are the most budgetary option, are inconvenient in that they do not fall down when the laundry needs to be hung or taken off. A metal tube clothes rack requires a careful selection of raw materials.

There is a way to make an original folding wood dryer that will easily fit into any interior and will take up little space even when unfolded. To install a clothes dryer in the bathroom, you will need the following materials:

  • wooden blocks for the manufacture of the frame, the length of which is selected in accordance with the size of the dryer;
  • round wooden rods;
  • plywood sheet (hanger base) - a rectangle, the short side of which is 3 cm larger than the short side of the dryer frame;
  • furniture hinges;
  • furniture folding mechanism;
  • fasteners;
  • latch for fixing (furniture lock).

The manufacturing process consists of 9 simple steps:

  1. Saw all the parts, taking into account the previously thought-out dimensions of the dryer.
  2. Drill symmetrically positioned small circular blind holes in the 2 side blocks. The diameter of the holes must match the diameter of the round rods.
  3. Insert the rods into the holes.
  4. Assemble the frame structure from two long beams and the resulting blank. Fasten the frame at the corners with screws or nails.
  5. Attach the frame to the plywood sheet (base) using furniture hinges, 2 cm away from the bottom long edge.
  6. Treat the frame and base with acrylic paint or varnish.
  7. Attach 2 folding mechanisms on one side to the side rails of the frame and on the other to the sides of the base.
  8. Install the locking latch in the center of the upper side of the structure.
  9. Reinforce the dryer on the wall.

conclusions

When choosing a dryer, it is necessary to focus on the planning features of the bathroom, the presence or absence of free space in it. A properly selected bath dryer is not only functional and practical, but also aesthetically pleasing.

Video instruction

The dryer for clothes in the bathroom is a functional device that helps to avoid inconvenience after washing things. The practicality of the product depends on the design and material of manufacture. Information about the advantages and disadvantages of various items, an overview of popular models contributes to the competent choice of clothes hangers suitable for the bathroom.

Varieties of clothes dryers

A rich assortment of dryers is represented by a wide model range, among which there are the simplest devices in the form of ropes between two rungs to high-tech electric models with the ability to adjust the temperature. The designs differ in the material of manufacture, the method of installation, and are designed for different volumes and weights of linen. Ease of use in the bathroom largely depends on the shape and size of the dryer.

According to the place of installation, the models are divided into 4 categories:

  • floor;
  • suspended on the ceiling;
  • wall-mounted;
  • located on the sides of the bath.

When choosing a dryer in the bathroom, it is the installation method that plays a decisive role.

Floor copies

The floor construction for linen is chosen in a spacious bathroom. Most often, a floor-type dryer is made in the form of a folding frame equipped with metal rods or strings. In the unfolded state, the structure is rather cumbersome, but it is these dimensions that allow you to hang a large amount of laundry.

When folded, the model is extremely compact, with a thickness of only 10 cm, so it can easily fit between the wall and the washing machine. With a dead weight of no more than 4 kg, wet laundry weighing about 20 kg can be hung on the dryer.

Usually, the range of products is represented by horizontal structures, but there are also multi-tiered products that resemble whatnots. Folding clothes hangers are often equipped with casters for comfortable transportation.

Advantages of floor models:

  • durability;
  • simple operation;
  • a light weight;
  • large capacity of linen;
  • there is no need to install additional fixtures in the bathroom.

The only drawback is the bulkiness of the structure, which will not fit into every bathroom, and in a small apartment it will be difficult for her to find a place.

Wall products

Much more practical in the bathroom is a wall dryer, which is produced in 3 modifications:


Comment! Accordion fasteners require careful handling. With prolonged operation or excessive load, the mechanism can fail.

Suspended ceiling structures

The bathroom can be equipped with a ceiling dryer, which is similar in design to wall-mounted models. The beams of the ceiling models are adjustable in height, so hanging the linen is not a hassle. Each bar moves independently of the other elements. Typically, ceiling dryers are installed above the bathroom to avoid puddles of wet laundry on the floor.

Positive aspects of installing a ceiling dryer in a bathroom:

  • The laundry is lightweight and takes up little space.
  • Small dimensions provide the dryer with an aesthetic appearance.
  • Comfortable operation.

Laboriousness of installation is a key disadvantage of suspended models. Special attention should be paid to the strength of the fastening so that the structure in the bathroom does not break off under the weight of the hanging laundry.

The optimal place for installation is a bathroom with high ceilings.

Bath attachments

The dryer consists of a light frame with stretched strings or thin tubes. Structures are solid and folding. Some models are placed on the bathtub at an angle, others are fixed on the sides.

Anti-slip plastic clips. Scope of application - drying small items, the product is intended for drying towels, underwear or socks.

Plus the purchase of a small dryer in the bathroom:

  • light weight;
  • compactness;
  • ease of use.

There are two drawbacks - the inability to take a bath while drying and the lack of space for hanging bulky things.

Electric models

The high cost of electric models is not an obstacle to the demand among consumers. The main purpose of purchasing an electric model is to be able to dry a thick sweater, warm jacket or cozy blanket in a short time. Among electric dryers, there are models with a variety of installation methods. Buying a suspended, wall or floor structure in the bathroom - everyone decides on the basis of the footage of the room.

Most of the electric dryers are equipped with a thermostat. Advanced models allow you to select the appropriate drying mode for the type of laundry. The timer is responsible for the duration of the operation. The main characteristics of the device:

  • economical consumption of electricity;
  • lack of noise in the bathroom when turned on;
  • designed for drying laundry up to 15 kg;
  • operation is not difficult;
  • the laundry dries evenly and quickly.
  • when folded, the design is compact.

A limitation for purchasing an electric type dryer in the bathroom may be the high price of the product and additional electricity costs during use.

Features of choice

An important criterion when choosing a dryer for a bathroom is the material of manufacture. The description of the properties will give an idea of ​​the advantages and disadvantages of each product:

  • Stainless steel. Leading in terms of quality characteristics. The design for the bathroom is durable, retains its original appearance for a long period, is able to withstand significant loads, there is no risk of getting unaesthetic stains on the linen, plaque is easily removed.
  • Aluminum. Powder-coated protection looks attractive but can be peeled off with frequent use. Bare aluminum on the dryer causes dark marks to appear on the laundry.
  • Plastic. Low cost and aesthetic appearance are the main advantages of bath dryers. A short period of service is a significant drawback. Plastic structures are not designed for intensive loads and quickly fail under the weight of over-hung laundry. Over time, the surface of plastic dryers takes on a yellow tint, the strings sag.
  • Wood. It is not often encountered when arranging a bathroom dryer. For long-term service, it is worth taking care of regular competent care. The advantages of the solution are the aesthetic appearance due to the original form.

Comment! If you need to frequently dry your laundry, it is recommended to equip the bathroom with a more practical metal model.

In addition to the material of manufacture, when choosing dryers for the bathroom, attention is paid to other features of the product. The durability of the structure is influenced by the quality of the joints and the ease of movement of the individual parts. For metal products, the density of the coating is checked to avoid the appearance of dark marks on the laundry. If the base is translucent, it is better to find another option. On such a copy, the paint will quickly peel off.

The optimal spacing between the strings is from 7 to 10 cm, with a closer arrangement, the laundry will dry longer. The absence of sharp protrusions on the frame, roughness and traces of welding is another condition for purchasing clothes dryers in the bathroom.

Suitable copy for purchase:

  • the surface of the frame is smooth;
  • all elements are evenly colored;
  • the ends of the tubes are protected by plugs;
  • clothes dryer supplemented with an information sheet indicating the permissible weight of the linen, size and configuration;

If you are purchasing a wall-mounted or wall-mounted tumble dryer, please check the installation instructions.

Review of popular models

The presented small part of the widest assortment will help you navigate the choice of design for your own bathroom.

Dryer Gimi Rotor-6. Installation of the budget model is carried out on the wall using self-tapping screws or dowels. The product of the Italian manufacturer is suitable for small bathrooms. The exhaust structure provides 6 strips for the laundry, and can withstand a weight of up to 10 kg. The length of the ropes is 3.6 m, after drying they take the starting position automatically.

The Liana dryer, which is mounted on the ceiling, is very popular. The simple design features 5 strings that can be individually adjusted. The permissible load per lane reaches 2.5 kg, the length of the models varies from 1.3 to 2.0 m.

The Siena folding floor structure will suit owners of a spacious bathroom. The tumble dryer includes 3 drying zones. Light weight 2 kg and spaciousness are the key advantages of the model. Hanging a large amount of laundry will help 18 rods, which will withstand a total load of up to 20 kg. Disassembled dimensions 55/112/180 cm. The dryer quickly folds, after which it becomes compact and can be stored in any convenient place.

Among the electric models, Alcona SBF-A4-FX deserves attention. Ceiling mounted with anchor bolts. Electronic control unit, the presence of a disinfecting UV lamp makes its operation extremely functional. The minimum power is 120 watts. The presented electric dryer will withstand the weight of wet clothes of 30 kg, the total length of the tubes is 8.2 m.

Many devices have been invented for drying clothes. Functional and compact dryers can be installed anywhere, but most often a laundry dryer and towel rack are installed in the bathroom. After all, here the hung wash is not in sight, and the ventilation system promotes faster drying. Even for a small room, there is an option for a bathroom dryer - a wall model.

The wall dryer does not take up much space, as it is installed on the wall, and the assembled folding model is almost invisible, and drying of small items of clothing can even take place on the assembled equipment. In this article, we will look at the types of wall dryers, analyze their pros and cons, describe the features of their selection, placement and installation, and also tell you how to assemble a wall dryer for clothes in the bathroom with your own hands.

The range of modern mechanisms for drying clothes is very diverse. First of all, a wide selection of shapes and types of structures catches the eye, among which there are miniature models for hanging small things over the bathroom, and spacious folding structures on which you can place all the laundry from the washing machine, not to mention ordinary water heated towel rails.

There are several types of wall dryers on the market, which differ in the method of installation and type of construction:

Foldable bathroom dryer Is a modern version of a rope hanger, on which our grandmothers dried their clothes for many decades. This structure consists of two plastic panels that are attached to opposite walls under the ceiling, and 4-6 ropes are stretched between them. If the ropes get in the way, then one panel is removed and attached to the other, and the ropes, like the cord of a modern vacuum cleaner, are automatically pulled inward.

Advantages:

  • ease of installation and operation;
  • low cost;
  • possibility of installation in small spaces.

Disadvantages:

  • maximum total weight of linen - 7 kg;
  • for models without a pull-up mechanism, the ropes sag under the weight of the laundry;
  • low-quality plastic cracks over time.


Sliding dryer bathroom has a more intricate design. It is a metal console that slides and slides forward like an accordion. Parts of the sliding structure are fixed to the wall with secure rivets. The laundry is hung on metal tubes located between two folding elements. After the wash is dry, the device is pressed against the wall so as not to hide the space.

Advantages:

  • compact design;
  • ease of use;
  • strength of parts;
  • the ability to withstand heavy weight;
  • can be used as a towel holder.

Disadvantages:

  • small dimensions of the sliding model;
  • the difficulty of drying large items;
  • budget fasteners can break during operation.


Electric hanger for the bathroom, as a rule, it is used as a heated towel rail, but if you are in a hurry, then it can be used for drying small laundry. The principle of operation of an electric dryer is similar to a fireplace-heater, and is a series of metal pipes connected to each other. The structure is mounted on the wall next to the outlet. This device dries up the wash much faster, but it is not suitable for all types of materials.

Advantages:

  • ease of installation and dismantling;
  • the ability to disconnect from the network when not in use;
  • a comfortable temperature for heating the tubes will protect against burns;
  • can be used as a heater.

Disadvantages:

  • the need to comply with safety rules when using electrical appliances in a room with high humidity;
  • small sizes are not suitable for drying bed linen and other large items.


Wall-ceiling clothes dryers in the bathroom can be attached in two ways - on opposite walls and on the ceiling. The holders are metal tubes through which 4-10 ropes are threaded. Another special rope allows the holders to be raised and lowered like a blind. The main advantage is the ability to hang clothes with a total weight of up to 20 kg.

Rod dryer- this design is similar to the ceiling one, however, it is fixed only on one of the walls. If necessary, the booms can be easily raised or lowered down to the desired level. Ideal for drying woolen garments and other garments that do not need to be hung to avoid stretching. The woolen sweater is placed on the rods, which allows you to dry your clothes without hanging them up.


There are also models of dryers with original design:

  • door - such designs are installed directly on the door in the bathroom. Hooks act as fasteners, so if necessary, the dryer can be easily removed from the door;
  • folding - easily mounted on any vertical surface. If the structures are not used for their intended purpose, then it rises and plays the role of a panel, and if necessary, it is thrown back and small linen and towels are dried on it;
  • battery - the device is fixed to the battery with several hooks and is used for drying small clothes.

Even in a small bathroom, you can attach this wall structure, which simulates a window. It is easy to transform the color scheme to match the overall interior design of the room:

How to choose a quality dryer?

The range of clothes dryers is regularly updated on the bathroom market. They perform the same function, but the methods of installation and production materials are changing.

The choice of design depends on how often you wash. If you wash your clothes frequently, but in small batches, then a small console or a battery dryer is a better choice. If the clothes are rarely washed, but in a large batch, then it is better to make a choice in favor of a folding or wall-ceiling model.

When choosing a design, you should also build on the dimensions of the room. A wall-mounted tumble dryer is suitable for a small bathroom. In order not to be mistaken with the dimensions, when you go to the store, take a tape measure with you. It will help not only to accurately measure the dimensions of the device, but also the distance between the ropes or crossbars, which should be at least 6-7 cm, otherwise it will be inconvenient to hang the wash, and it will take longer to dry.


In addition to the type of structure and its dimensions, when choosing a tumble dryer, you also need to pay attention to what material it is made of. There is high humidity in the bathroom, and the elements of the device are constantly in contact with wet clothes, so all fasteners and parts must be resistant to rust.

  1. From this point of view, stainless steel dryers will be the strongest structures. This material easily withstands heavy loads, does not oxidize and does not corrode when interacting with moisture, and has an attractive appearance.
  2. Metal dryers made of steel, coated with powder paints or enamel, are also very durable, but the special coating cracks over time, and then steel, due to high humidity, quickly becomes covered with plaque and rust.
  3. Aluminum structures are considered the budget options for steel fixtures. They are strong enough and lightweight, but do not differ in durability, while they are intended only for drying light laundry in small batches.
  4. Plastic models for compact placement on a wall or door, despite their low strength, are in demand because of their low cost, simple design, low weight and a wide range of colors.

Another important parameter when choosing a quality clothes dryer is the fittings. Loops and fasteners should be of high quality and reliable, and the strings of rope models should be smooth and strong. Choose models that come with dowels and screws so that you do not have to buy them and select them for threaded holes.

Thus, when choosing a mechanism for drying clothes, be guided by the following parameters:

  • type of construction;
  • room dimensions;
  • material of manufacture;
  • quality of fittings;
  • availability of additional features (descent and ascent, length and height adjustment);
  • the maximum weight that the device can support.

A properly chosen tumble dryer will be a great addition to your bathroom interior and will be a good help in the household.


Placement principles and installation rules

When planning the installation of a wall-mounted clothes dryer in the bathroom, there are some nuances to consider.

In order not to test the strength of fasteners and interior partitions, choose a load-bearing wall to place the device. Then you will be sure that under the weight of wet things the fasteners will not fall out along with the finish and plaster of the wall.

It is also worth considering that while drying things, you will need free access to the bath, cabinets and plumbing. Therefore, place the mechanism so that it does not obstruct your access to essential items.

Try to place the device closer to the ventilation system, then the clothes will dry faster and the moisture will evaporate in time. Keep an eye on the ventilation hole at all times, cleaning it from time to time. It is good if the bathroom has a heating battery.

Note also that the dryer should not be installed next to a mirror or plumbing fixtures and chrome parts to prevent unwanted water ingress on them.

The installation of a wall dryer should begin by choosing the most suitable location. Then follow the recommendations of the installation instructions for the given model:

  1. Using the fixing bracket, mark the future fasteners through the through holes.
  2. Drill holes for fasteners according to the markings on the wall.
  3. Then, using the fasteners, fix the brackets to the wall.
  4. After that, fix the remaining parts of the dryer to the brackets following the instructions in the assembly manual.

The device is ready for use!


How to make a clothes dryer yourself?

We know of two ways to make your own device for drying clothes in the bathroom:

Method 1: rope dryer

The simplest variation of a do-it-yourself dryer is hooks and ropes located above the bathroom. Initially, it is recommended to go to a hardware store and purchase the materials we need (instead of hooks, you can use beautiful wire or thick fishing line as an option). After all the materials we need have been purchased, proceed to marking the places where the dryer will be mounted.

Mark the places where the hooks will be located: their location should be on the same line at an equal distance from each other. In the marked places, drill holes of the required diameter in which to securely fix the hooks. From the rope, cut the required number of pieces of the desired length and pull between the hooks. And this is how we assemble the simplest dryer.

Method 2: overhead dryer

For a more complex design, it will take more time, as well as a wood tool. The dryer will be made of wooden slats with a cross-section of 2 cm. Getting started, saw off the constituent elements of the device: you will need two bars equal to the length of the bathtub and 6-8 bars, the length of which should be equal to the width of the bathtub. The resulting bars need to be sanded.

Elements equal to the length of the bath, place them at a distance slightly less than the width of the bath itself and nail short bars to them. Short elements will serve as holders for linen. The distance between them should be the same so that the structure itself also has an aesthetic appearance, and not only is reliable. The finished product can be varnished or painted in a color that matches the interior of your bathroom.

Watch also the video on how to make a foldable dryer yourself: