It is better to pay off tax debts before May 1. Otherwise, potential and current counterparties will see information that the company is in debt to the budget for a whole year.< … Сдача СЗВ-М на директора-учредителя: ПФР определился Пенсионный фонд наконец-то поставил точку в спорах о необходимости представлять форму СЗВ-М в отношении руководителя-единственного учредителя. Так вот, на таких лиц нужно сдавать и СЗВ-М, и СЗВ-СТАЖ! < … Налог на прибыль: перечень расходов расширен Подписан закон, который внес изменения в перечень расходов, относящихся к оплате труда. Так, работодатели смогут учитывать в «прибыльной» базе затраты на оплату услуг по организации туризма, санаторно-курортного лечения и отдыха на территории России для работников и членов их семей (родителей, супругов и детей). < …

The program "preparation of calculations for the FSS"

Attention

How to protect yourself with 4-FSS electronic reporting All 4-FSS electronic calculations go through the so-called input format-logical control. This means that if the calculation contains errors, the foundation will immediately identify them and will not accept the report, but will return them for revision.

Accordingly, if the form was sent on the last day, there is a big risk that in case of any shortcomings, you will not have time to correct the original form and resubmit it on the same day. It turns out that you will reply to the fund later. And some branches of the FSS interpret this as a delay in submitting reports.

Info

And everyone can write out a fine at the same minimum, equal to 1000 rubles. Be warned: a fine in such a situation can be challenged in court.

Reason: liability is provided by law for violation of the deadline for sending the calculation, and not for mistakes made in it.

Lifeip.ru

The second step will be to update the AWS of the FSS. Check if there is a new version of AWS FSS. Updates can be checked here. If you do not know how to update the AWS of the FSS, then read my article here.
Checking the error again. If it reappears, let's move on to drastic measures. Access violation error at address 005F2A9C in module ‘arm_fss.exe’.

Read of address 445F4449. Radical Remedies Before proceeding with this step, let's still secure ourselves and our data. Let's make a backup copy of our database. If you do not know how to do this, then read my article here.

Now we can break everything and are not afraid that our data will be lost. Download the AWS FSS installation file again. And we will install it, if you do not know how to install the AWS FSS, read my article here. But we will carry out the installation with minor edits.

Error 503 in the fss report (what it means and how to fix it)

If instead of an electronic report, in this case, a paper report is submitted, this will mean that the established method of presenting the calculation has not been observed. For this, a fine of 200 rubles is provided. for the policyholder himself (Article 26.31 of the Federal Law of 24.07.98 No. 125-FZ). And for officials - from 300 to 500 rubles. (Clause 3, Article 15.33 of the Administrative Code). Organizations with a smaller staff have the opportunity to choose - submit calculations on paper or electronically (p.

1 tbsp. 24 of the Federal Law of 24.07.98 No. 125-FZ). 4-FSS: how to report electronically Without the Internet, you can report electronically on an external medium. They can be a floppy disk, CD, flash drive, etc. Only an electronic signature must be required. According to the current legislation, there is only one way to report via the Internet.

Error 508 in the fss report - what is it and how to fix it?

Let's install the program not in the default folder, but somewhere else, for example, on disk D. Let's just create a new folder on disk D and call it AWP FSS.

And in this folder we will install our new program. By the way, many errors in the AWS FSS can be avoided if the program is installed in the NOT folder by default. This decision was suggested to me by my reader Olga, for which she THANKS A LOT! She suggested that if you install the AWS FSS in any other folder, you can get rid of the DM BASE error, I wrote about this error and how to get rid of it here.

After you install the FSS AWS into the new folder, we need to put our database back in place. Launch AWP FSS from disk D. And restore the base.

How to restore the database in the FSS AWS Open the program and go to the "Service" menu item, then select "Database", then "Database restore".

Error 508 in the fss report

It is used by organizations that are not participating in the Pilot Project. You should check the settings of the organization to which the file is uploaded. Samarin Sergey, KAMIN company The topic is locked. Thank you: Andrey Lanshin, BukhService Error loading in AWS FSS 6 months. 2 weeks back # 3

BukhService

• Offline
• I go sometimes
• Posts: 74
• Thanks received: 30
• Reputation: 7

I understood what was going on. We have several branches, one in the Belgorod region. We had to make a small revision for them (there are no pilot projects in the other branches of the organization) and, in particular, to remove the Firm everywhere. Instead, I wrote the appropriate functions in my module and, depending on which branch employee, I return the necessary data.

Form 4-fss: download the form

The policyholder will need to correct the error. As a rule, the reasons for assigning error code 508 in the FSS report are as follows:

• not fully unloaded data from the 1C program;
• the program used to generate the report is outdated as of the current date.

If this error cannot be eliminated, we recommend using the electronic portal on the official website of the FSS http://portal.fss.ru.

It always contains up-to-date information, and there is no doubt about its performance. The specified portal allows both uploading the completed form and sending the form through the portal after passing the preliminary registration procedure. Responsibility for violation of the term If errors in the calculation of 4-FSS are eliminated before the expiry date of the term for its submission, then any liability for the policyholder will not follow.
General data group Possible inaccuracies Syntax errors Incorrect characters - spaces, commas, hyphens The indicator of the professional risk class The risk class must correspond to the indicator assigned annually by the fund based on the documents of the enterprise Indicator of the subordination code The title page must contain the subordination code Format of sum indicators When specifying amounts, a comma is used instead of a period as a separator for rubles and kopecks. the procedure for submitting reports, you must refer to the official website of the FSS.

Error 508 of the program arm fss version 4 0 2 50

Good afternoon dear friends! Today we will consider an error in the AWS "Preparing calculations for the FSS", which sounds like this: Access violation at address 005F2A9C in module ‘arm_fss.exe’. Read of address 445F4449. Error in AWS FSS. Access violation at address 005F2A9C in module ‘arm_fss.exe’.

Important

Read of address 445F4449 One of the readers told me about this error. When unloading a report in .xml format, it received this error.

Together we tried to solve it. Until the end, it is still not clear where this error came from and what needs to be done to make it disappear for sure. But I'll tell you what we did to get around the error. The first step is to restart the program. Save all your data and exit completely from the FSS AWS. For best results, restart your computer completely. Then try to work in the program again, if the error persists, let's move on to the next item.

Error 508 of the program arm fss version 4 0 2 50.2

Error loading in AWS FSS 6 months. 2 weeks back # 1

• BukhService
• Offline
• I go sometimes
• Posts: 74
• Thanks received: 30
• Reputation: 7

The company unloads the file from the sick leave register (see attachment, the file is collapsed into the archive), when trying to download it to the FSS AWS, an error occurs (see attachment). How do we upload information? Attachments:

• E_3646406428_2017_10_18_01.zip (1KB)
• Error.jpg (124KB)

The topic is locked. Error loading in AWS FSS 6 months. 2 weeks back # 2

• Sergey
• Offline
• I live here
• Posts: 611
• Thanks received: 725
• Reputation: 153

Hello! The attached file is the ELN registry file.

If an error is found, the policyholder should make the necessary corrections in the report. An independent check of the 4-FSS form can be carried out on the official website http://portal.fss.ru by uploading the corresponding file with the calculation or filling out the form on the electronic portal.

Such a check will identify and correct possible errors at the stage of preparation for submitting the calculation to the supervisory authority. If, when submitting a 4-FSS report, error 508 was detected, then the code of this error will indicate that the report could not overcome the format-logical control procedure.

The fact of revealing the corresponding error by the supervisory authority must be accompanied by sending the policyholder a notification of the detected error with a decoding of its causes. The submission of a report with an error cannot be recognized by the social insurance body as the proper performance of the relevant obligation established by law.

The portal contains a section and regularly publishes news on electronic reporting. The reason for the appearance of a negative protocol with error 503 The official website of the FSS recognizes error 503 as "the XML calculation file did not pass the format control."

The error indicates that XSD cannot read the information due to the presence of inaccuracies, incorrect entries in the file from the point of view of the programming language. The program also recognizes an error in the absence or inaccuracy of data (for example, the absence of the name of the company, its inconsistency with the register), in case of non-observance of the format of information input (presence of gaps, extra characters, etc.) or incorrect filling of the cipher of section I or II.

Instructions for installing the update AWP FM

Module "Refusal-M" (4077-U)

up to version 1.3

I... NSpreparatory actions

1. Check the current version of the AWP.

Refusal-M "(4077-U) are available on the website

http: //filestore1.comita. ru / Otkaz_Updates / comitaupdates. html

2. Create a backup.

Before starting archiving and installing the update, the user must complete work with the AWP and make a backup copy of the program and database.

II. Updating AWP FM Module "Refusal-M" (4077-U) to version 1.3

1. If you downloaded the update from the site, you must do the following:

· Close AWP FM Module Failure-M (4077-U).

Copy files with updates armotkaz_1.2.2.zip, armotkaz_1.2.3.zip, armotkaz_1.3.zip to the directory C: \ comita \ armotkaz \UPGRADE.

2. Start the program AWP FM Module "Failure-M" (4077-U). Enter username and password

3. The installation of the update will begin. After successful installation of the update, the program will automatically restart.

You can view the version in the program by pressing the SHIFT + F1 key combination or in the main menu - "Help" - "About the system", the "AWP Failure" tab, the "Version: 1.3" field, in addition, the AWP version will be displayed in the program header.

NEW IN ARM FM "Refusal-M" module (4077-U)

Adding the ability to process the Registers of information about refusals received through the channels of the Bank of Russia in accordance with 550-P

Instructions for setting up an automated workplace for processing files of the Registers of information about failures.

1. Configuring AWP
Select the menu item Settings \ Account settings.

If the “no encryption” mode is used in the AWS, you do not need to check the settings.

At the moment, the decryption of the registers is carried out with the key 7007942009, and the placement of the spacecraft on the receipt with the key corresponding to the key of the spacecraft CPSU "Verba-ОW" of your institution, intended for interaction with the federal services of Russia.

Fig. 1. Account settings. Organizations tab

2. The “Bank of Russia” tab contains the keys used for encryption and establishment of the CA by the Bank of Russia (Fig. 2).

At the moment, the encryption of registers by the Bank of Russia is performed with the key 7008942009, and the installation of the KA with the key 700894200901.

Fig. 2. Account settings. Bank of Russia tab

The above settings need to be checked.

2. Obtaining the register.

Depending on the mode used, with or without encryption:

2.1 "No encryption" mode

2.1.1 In the% exchange directory% \ CBRF \ BANK (where the% exchange directory% can be viewed in the Settings \ Account settings \ Transport settings button) place the decrypted file received via the Bank of Russia channels with the captured CA, for example, CB_ES550P_YYYYMMDD_NNN. xml, where YYYYMMDD is the date of the file formation, NNN is the file number for the day of formation.

2.1.2 Start the AWP, if it is not already started, and perform the "Send / Receive" procedure.

2.1.2.1 As a result of processing the registry file, a receipt / receipts will be generated and placed in the "For sending" folder

2.1.2.2 Upon completion of the processing of registers, a message will be displayed (Fig. 3)

Fig. 3. Confirmation of sending a receipt with the results of processing the Registry file

In case of confirmation of sending to the% exchange directory% \ BANK \ CBRF, a subdirectory will be formed with the name corresponding to the name of the archive file, in which it will be necessary to send the receipt / receipts to the Bank of Russia.

2.2 Mode using encryption procedure

2.2.1 In the% exchange directory% \ CBRF \ BANK (where the% exchange directory% can be viewed in the Settings \ Account settings \ Transport settings button) place a file received through the Bank of Russia channels, for example, CB_ES550P_YYYYMMDD_NNN. ARJ, where YYYYMMDD is the date of the file formation, NNN is the file number for the day of formation.

2.2.2 Start the AWP, if it is not already running, and perform the "Send / Receive" procedure.

2.2.2.1 As a result of processing the registry file, a receipt / receipts will be generated and placed in the "For sending" folder

2.2.2.2 At the end of the processing of registers, a message will be displayed (Fig. 3)

In case of confirmation of sending to the% exchange directory% \ BANK \ CBRF, an archive file will be generated, which will contain receipts, and which will need to be sent to the Bank of Russia.

1. Run the bank key to encrypt information.

2. To encrypt information, add keys 7007942009 and 7008942009 to the bank key reference book.

3. After this setting, do the following:

3.1. Open the window AWP "RMP Verba-OW" in the tab Directories - Directories of private keys and directories(fig. 4).

Rice. 4 Window AWP "RMP Verba-OW"

3.2. Open the folder according to the path indicated in the field Directory with directories of public encryption keys.

4. Copy the folder OPENKEY(Fig. 5) to a similar folder of "catalogs of private keys and reference books" for the key 7007-942009-01

5. Close AWP "RMP Verba-OW"

6. Run AWP "RMP Verba-OW" using key to decrypt the Registry ( 7007942009 ).

7. The request to sign the reference book must be answered positively.

8. Copy the resulting folder in step 7 OPENKEY to the program directory ..\ armotkaz \Verba.

9. Close the program "RMP Verba-OW".

10. Run AWP "RMP Verba-OW" using bank key for signing information (KA Installations).

11. It is necessary to add keys 700894200901 to the directory.

12. By analogy with p. 3.1-3.2 (Fig. 4), open the folder according to the path specified in the field Catalog with reference books of public EDS keys

13. Copy the folder FAXKEY(fig. 4) to the program directory ..\ armotkaz \Verba.

Rice. 5 FolderOPENKEY

A little video with tips to help you compile reports 4 FSS in 2017 for legal entities:

Some features of the AWS FSS Program for reporting to the Social Insurance Fund.

We all should have got used to the fact that employees of various ministries and departments work out their salaries long ago. Well, they cannot sit with folded hands on their knees, receiving money for it. They show work activity very zealously. New forms are issued with enviable regularity, changes are made, some columns (columns, columns) are removed and others are immediately added. Well done, what else to say. Don't let entrepreneurs get bored.

All kinds of changes and additions periodically appear in the AWS of the FSS. You need to monitor them very regularly. We would advise you to check for updates before submitting your reports. And in cases of need to install them, so as not to make reports again later.

Another good video with practical advice on the topic "New reporting forms in 2017: RSV and 4-FSS". In it we will learn about the composition of the data in the new RSV, about its differences from the previous RSV-1 forms for the FIU. We will also be shown which section was removed from the old 4-FSS form. In this regard, the new form has become much smaller, simpler, although the order of filling in the rest of the part has not been changed.

Several answers to frequently asked questions

Why do I need to install these same updates for the FSS AWS?

If any number or letter is incorrectly entered in our report, such a report will not be accepted. Well, if it is an outdated version, then there is nothing to talk about at all. Yes, the developers themselves also add headaches to us. After releasing the next update, they can then discover their flaws. They release changes, fix bugs and errors. Therefore, always visit us and check for updates.

I drew up a report to 4 FSS, but in KLADR there is no address I need. What should be done?

The developers of AWS FSS upload new KLADR FSS to the network for general use. Always download the latest version of KLADR. After downloading, add to the SBADDRESS folder in your program. It is located in the DataBase folder, which in turn is located at the root of the program itself. After replacing KLADR with a new one, all your new addresses will immediately become available. They will appear when you restart the program.

How can I find out the latest version of the AWS FSS?

Opening the program, we will immediately see the version number in the window header. By going to our website, you can compare its number with our latest version. if they match, then you have the last one. No updates required.

AWP FSS is an official program developed by the Social Insurance Fund of the Russian Federation. With its help, you can prepare electronic disability sheets (ELN) for individuals and authorized persons. It creates calculations using the FSS-4 and FSS4a forms. The software is distributed free of charge and is compatible with all versions of Windows OS from XP and higher.

The program is used in various enterprises and organizations. It allows you to create employee databases and keep track of them. You can independently add a new organization to the AWS FSS. Also, the program provides a reference book containing documentation for working with the forms of the insurance fund.

The main function of the software is the ability to create ELN by sending them via email or print. The form templates presented in the latest version fully comply with the requirements of the current legislation. To protect documents, the software provides the option of adding an electronic signature.

Features of the AWS program "Preparation of calculations for the FSS":

• Maintaining a database of employees of the enterprise;
• Adding organizations;
• Electronic signature support;
• Creation and export of ELN;
• Saving files in XML format;

The program has Russian localization, a simple graphic shell and an intuitive interface. You can download the latest version of AWP FSS 2018 from our resource or on the official website of the FSS (link below).

Screenshots