Sections of the article:

Blind doors are a combined version of door blocks that simultaneously include an ordinary door leaf with lamellas placed inside. In addition, this term is often called accordion constructions, which can be called blinds at a stretch. What are such products really?

Blinds doors: what is it

In order to deal with all the advantages and disadvantages of blind doors, you first need to decide on the very concept: what is this type of interior design. By and large, these are ordinary swing or sliding door blocks, in the middle of which, instead of the traditional blank or decorative glass insert, lamellas are placed. In addition, a non-adjustable type of blinds is often used, namely a set of horizontally inclined slats.

It is difficult to isolate such products into a separate kind. In most cases, jalousie doors are hinged or sliding type structures. The main purpose of the design features of the door leaf is the ability to adjust the amount of transmitted light. In addition, such products make it possible to get an overview of the room from one side and, at the same time, limit visibility on the other. Often this solution is used in situations where it is necessary to exercise permanent control over what is happening in a particular room.

From the characteristics of such products, one can draw a logical conclusion about their purpose. Interior doors of blinds are often installed in the offices of the heads of companies and industries adjacent to the working room filled with subordinates.

Varieties

As such, there are no varieties of doors of this type. All the differences between such door structures lie in the structure of the blinds themselves, which are inside the door leaf. These elements can be produced in different shapes and made from a variety of materials.

As a rule, there are two types of blinds. There are fixed and adjustable slats. Doors equipped with fixed louvers are of a fixed lamella design. They make it possible to view a room from one specific point. With this option, it is not possible to get a larger overview.

Adjustable louver doors are a more versatile version of these door units. Movable slats make it possible to change the viewing angle and the amount of light transmitted by the door leaf. As a rule, such door blocks have a much higher cost due to their rather complex design. Often, many people prefer to equip ordinary door blocks with glass inserts with ordinary horizontal hinged blinds. This solution is much more economical than purchasing doors with adjustable lamellas.

Another classification feature of such doors is the direction of the lamellas. In this respect, door units can be divided into vertical louvered doors and horizontal ones. The most popular and widespread type is products with horizontal lamellas. The main advantage of such structures is the ability to create a panoramic view. If the slats are properly adjusted, then you can get the visibility of the room behind the door block not only in a straight path, but also on the sides of the door leaf.

Vertical doors allow viewing only that part of the room that is located directly behind the door leaf and blinds. It is because of this shortcoming that such structures are rarely used, and by vertical doors they often mean accordion canvases, divided into several folding narrow sections.

Along with the types described above, such door blocks are classified according to the type of material from which they are made. Basically, wood or polyvinyl chloride is used for the production of such products. If we are talking about modern metal-plastic structures, then they are equipped with separately mounted adjustable lamellas. At the moment, there are no PVC door blocks with built-in lamellas. Often, under the plastic doors, blinds are understood as the same accordion designs. In most cases, such products are characterized by low cost and extremely low quality, which can only stand out in appearance.

Wooden jalousie doors are a classic version of these designs. In most cases, these door blocks are equipped with fixed and rigidly fixed lamellas. They are located at a certain, constant angle of inclination. The advantage of such door blocks is the ease of making with your own hands. With the necessary tools, almost everyone can at home remake any old wooden door blocks into a lamellar structure.

How to convert a standard blind door

Making blind doors at home with your own hands is not so difficult as it might seem at first glance. The fastest and easiest way is to alter the existing wooden door leaf by replacing the decorative part with lamellas. The whole process is divided into three sequential stages.

The first step is to dismantle the decorative insert. When it comes to glass, it is easy to remove it. To do this, you need to carefully remove the glazing beads, and then dismantle the decorative element. In this case, it is better to start the procedure with the lower fastener. Then remove the side glazing beads and only then the top one. Such an algorithm of actions will prevent the glass from falling out.

At the second stage, it is necessary to make oblique cuts inside the door leaf. To do this, you can use a hand-held router, which is perfect for arranging the seats for the lamellas. In the course of this operation, it is important to accurately calculate and implement the location and angle of inclination of the recesses.

Now you need to insert the slats into the prepared grooves. To ensure proper fastening of the elements, you can use PVA glue. To hide the ends of the lamellas and seats, a wooden strip is used, which must be filled with small nails along the entire perimeter of the insert.

Another original way to make blind doors at home is to use adjustable slats. To do this, it is also necessary to dismantle the inner decorative insert from the old door leaf. Then you should hide the inner end with a special decorative tape and install ordinary horizontal movable blinds in the vacated space. These can be purchased at many building supplies stores.

In conclusion, it should be emphasized that the installation of blind door units is carried out in a traditional way. The installation technology of such structures is identical to work with hinged interior doors of other types.

When arranging a country house, office or apartment, they often choose a wardrobe with louvered doors, which is easy to use. It is a practical piece of furniture that fits into the room.

The louver door system is used in furniture for various purposes. It can be found in the arrangement of facades on bedside tables, kitchen furniture, interior systems. The main element is a sturdy, reliable frame. Cross bars are attached to it at an angle. When choosing, you need to pay attention to the design of the lifting mechanism. It must be of high quality in order to be reliable in use.

If you choose a low-quality system for installation on a cabinet, then difficulties will arise when using a ready-made structure. The movements will not be smooth, therefore, deformed areas will appear on the surface of the product. Door blinds are made of plastic, durable metal, bamboo, wood, fabric.

For the production of cabinets or bedside tables, wooden systems are used. This is a convenient and practical material that lends itself to processing, so specialists can embody any design ideas. Wooden folding doors are additionally treated with transparent paint or varnish. They give the structure a more attractive glossy sheen. In order for the wood surface to have the effect of a valuable wood species, it is opened with a stain. Many people give preference to saturated color paints, thanks to which the blinds will turn into a rather bright, as well as original detail in the interior.

Advantages and disadvantages

Furniture blinds for wardrobes have the following advantages:

• rational distribution of functional space;
• simple, easy installation;
• light weight of the material, good ventilation thanks to the gaps;
• long service life;
• you can perform simple repairs or restore damaged areas;
• neat, attractive appearance.

Venetian blind cabinets also have disadvantages that can help when choosing a design for a home, office, apartment:

• the finished product has a relatively high cost;
• painting or opening with varnish becomes difficult;
• the contents of the cabinet are not protected from the penetration of odors from the room;
• it is necessary to carefully control the level of humidity (the doors can be deformed);
• the coating of the lamellas directly depends on the sharp fluctuations in temperature.

Knowing about the advantages and disadvantages, you can make the right choice. Even inexperienced home craftsmen can handle the installation of structures.

Varieties

Cabinets and other designs with louvered doors differ in the following types:

• horizontal - this type of blind is more suitable for small-sized cabinets. The slats are installed horizontally from the door frame. The size of the gap between them can be different, it all depends on the wishes of the client;
• vertical blinds - in such louvered designs, the slats are installed vertically in relation to the frame;
• accordion sliding doors - they are often used to decorate the interior of a room. They serve as partitions or for closet rooms. They can be used instead of a door; each side of the opening is connected to each other using fabric or durable leather. The structure is moved by means of a rail, which is installed on the ceiling and floor. In rare cases, only one frame can be used for fastening if the door structure is small;
• roll-up is a simple design that can be easily removed and put back in place. Roller shutter doors are increasingly in demand. They rotate thanks to a chain mechanism that raises and lowers the fabric. Roller blinds are used in cabinets of different sizes.

Each person will be able to choose the best option for himself. Louvered doors are presented in a wide range.

Vertical

Harmonic

Horizontal

Roll

Manufacturing materials

There are several types of louvered doors, which differ in their characteristics and material:

• wooden - they are made from natural wood. These products can be found in the living room or bedroom. They have a stylish design and fit seamlessly into any interior. It is not recommended to install jalousie doors made of wood in rooms with high humidity. This material can deform with constant contact with moisture;
• plastic - suitable for a sanitary cabinet. They are not afraid of high humidity, and are also easy to clean. Such products are presented in a wide variety of colors and shades. Their price is much lower;
• fabric - the material differs in density, shades and texture. The most durable and high quality fabric blinds are made of polyester. This material does not fade in the sun and is easy to clean;
• bamboo - lightweight and moisture resistant. The stores offer a wide and varied selection of shades. You can find golden brown, greenish, beige and light beige shades. These louvered doors are more expensive than plastic and fabric. They are resistant to damage and easy to clean.

In most cases, wooden shutter doors are made from pine. This material is highly durable and reliable. The shops also present design solutions from precious wood species. Such products will serve their owners for a long time and will delight with their performance characteristics.

Plastic structures attract people with their lightness. Air circulates well through small gaps. It is advisable to install them in the kitchen or dressing rooms. Lattice doors have thick slats that are neatly stacked on top of each other. They are installed on bulky cabinets and other home furnishings.

Wooden

Plasticky

Tissue

Bamboo

To make the right choice, you need to consider several important recommendations. If blinds are needed to visually expand the room, then wide white slats should be used. Vertical furniture blinds for the closet are chosen by people who live in small rooms. Such designs visually make the ceilings high.

When choosing jalousie doors, you need to pay attention to the material of their manufacture.

Particular attention should be paid to the fittings. More often cabinets with louvered doors are made according to individual parameters, so the fittings are selected separately. Each person can additionally order a metal handle, decorative strips.

High-quality fittings will make the louvered doors the most attractive and comfortable to use. Its main purpose is to increase the convenience of the cabinet, improve the appearance of the finished structure.

Video

Photo

In modern interiors, the role of a door or interior partition is increasingly played by vertical or horizontal blinds. This method of decor makes the room more airy and light, significantly expands the boundaries of the space. Blinds instead of doors are used not only in modern styles, but also in rooms with a classic interior.

Most often in apartments and houses you can find vertical blinds instead of doors. This is due to the fact that the lamellas in such structures hang freely, without blocking the passage from one part of the room to another.

Some nuances of using blinds instead of a door to a room or closet

The blinds used in the doorway instead of doors are outwardly very similar to the window models familiar to everyone. All their difference is that the length of the lamellas is much larger. The material is selected for the interior and can be anything: plastic, natural or synthetic fabric, wood. It is important to decide not only on the type of construction, but also on the color of the material.

It is worth remembering that the blinds in the doorway, which are installed instead of the door, will not become a full-fledged replacement for it. This is a way to zone a space without weighing it down. Features such as sound and heat insulation are not available for blinds. To get a full-fledged partition, they are often combined with a regular door. Such an option as a combination, especially to the place where the blinds are installed on the balcony door. In summer, you can use only them as a partition, and close the door in cold weather.

So, the following points can be considered the main advantages of using blinds instead of a door to a closet, a wardrobe:

• Airiness and lightness of construction. The curtain and the cornice of the blinds do not weigh much, therefore they do not burden the walls and overlapping of openings;
• Unusual and original look. This way of decorating a doorway looks unusual and unusual for the eyes. Blinds are less common in the decor of premises, therefore, they attract attention;
• Compactness. The blinds can be moved, removed or collapsed at any time;
• Zoning and division of space. You can use the blinds not only as a door, but also for dividing the entire space of the room into two parts. For example, separate the sleeping area from the work area, the children's resting area from the adult, etc.

This photo shows an example of using blinds instead of doors for zoning the space of a room:

What kind of blinds are used instead of a door?

In apartments and private houses, there are many places where this method of opening design is used. Blinds are often installed on the balcony door. If it is part of a balcony block, then all the lamellas - both on the window and on the door - are made of the same material, or selected so that they act as a single ensemble.

Blinds are increasingly used in modern interiors instead of the door to the closet. This is convenient, since access to things on the shelves is always open, and the opening looks quite aesthetically pleasing. For the same reasons, blinds are installed instead of cabinet doors, both built-in and conventional

The following types of blinds are used for the doorway:

• Vertical - they can be fabric or plastic, patterned or plain. This is the most common type of construction used instead of doors and partitions;
• Horizontal - often replace plumbing shutters and doors, or are installed in cabinets;
• Accordion - reminiscent of pleated blinds, which, if necessary, are assembled into a compact accordion;
• String - such blinds are a canvas composed of threads with various inserts, they completely transmit light and play a more decorative role.

When choosing blinds instead of a door to a closet, wardrobe, balcony or room, you should pay attention not only to the features of their design, but also to their appearance. We must not forget that not all interiors will look equally good with such a doorway decor. It is necessary to think over not only the type of canvas, but also its color. In some cases, photo blinds or other non-standard options will do.

It is better to entrust the measurement of the opening and the installation of ready-made blinds to experienced craftsmen, since the appearance of the entire room as a whole depends on the correctness of the calculations. A professional approach is especially important in the installation of long blinds, which divide the room into two parts along the entire length or width.

In apartments with open doorways, vertical louvers can be installed to separate one room from another, if necessary.

Types of louvered partitions

1. Vertical (fabric, or plastic)

Wide slats are good in openings as partitions;

Vertical blinds for a wide opening in the apartment Vertical plastic blinds as a curtain in the hallway

2. Horizontal (wooden)

Thin folding slats follow the dimensions of the door leaves. Used as curtains at the same time;

Blinds on the front door

3. Venetian blinds, "String"

Thread lamellas instead of fabric ones let in more light, look more interesting in the interior. Dignity - they can be pushed aside by the shutter mechanism, while an outwardly similar curtain - muslin always remains in place;

Thongs-threads on the opening of the interior door

4. Accordion (plastic)

In fact, this is not a kind of blinds, but of doors folding towards the side like an accordion. Because of their external resemblance to blinds, they are often called that - blinds in the opening;

Wide-opening accordion-type curtains

The convenience of this design is obvious. Perhaps this is the most successful version of a compact way to delimit space. Accordion blinds combine stability, durability of the door leaf, ergonomics in space;

5. Roller blinds

The shutters are tightly closed, they can reliably cover the plumbing, storage room, electrical panel.

Rollers for a utility niche in the bathroom

Benefits of blind partitions

By installing blinds as a partition on the interior opening, you will give the interior more originality and airiness. Blinds look stylish, modern. We will name other advantages:

1. Ease. All types of blinds look much easier than doors. Likewise, physical ease allows them to be installed on plasterboard partitions, even of small thickness. Simplicity of assembly and disassembly is also a pleasant bonus;

1. Originality. They look interesting and unusual;
2. Unobtrusiveness. They merge with the general interior, they are not striking.
3. Easy to install. If necessary, the blinds can be rolled up or dismantled;
4. Zoning. With the help of blinds, it is easier and most effective to zone a room. Full mobility, brightness of solutions, dynamics of “rolled-unfolded” positions, a variety of types of blinds will allow you to choose the appropriate option for each case. In addition to advantages, louvered partitions have qualities that can be considered disadvantages.

Cons of installing blinds on the opening in the wall

• blinds do not have sound insulation properties;
• cannot protect against entering the premises;
• caring for them is not easy;
• their designs are unreliable and sometimes quickly deteriorate.

Where it is convenient to use blinds instead of doors

Most often, jalousie doors are installed for zoning the following rooms:

• rooms that do not require permanent isolation. In this case, wooden or plastic blinds act as interior doors;
• balcony;
• storage room;
• installation with a door. In cases where the door should not be closed, but visual differentiation is required.

The best option for openings is vertical blinds. Lamellas can be made of fabric, plastic, rarely wood. Japanese curtains are perfect for decorating a wide doorway (the fabric is stretched over a frame-frame, moves along the rail cornice).

Japanese blinds instead of a door hidden wardrobe

If the room has glass doors, then horizontal curtains made of aluminum are ideal. It is best to use such blinds in office premises - as a support for office style, and away from small children and pets that can spoil a fragile structure in an instant.

In apartments with glass doors, roller blinds and pleated curtains are the best option. A distinctive feature of these blinds is that they fit snugly against the doors and do not interfere with their opening.

Using roller shutters as interior partitions

In some special cases, blinds are installed on doorways, which will be a better replacement for conventional swing doors.

In small apartments, utility rooms or storage rooms are used to store appliances or equipment. Most often, the pantry is located in a narrow corridor, or next to the doors to another room - therefore, it is not possible to install a full-fledged door on it in most cases. The doors will touch each other, damaging themselves, walls, and people passing through them. Therefore, roller blinds are an irreplaceable thing in this case.
Especially if the pantry is on your balcony, where it is absolutely. there is not a single extra centimeter. All household belongings can be safely hidden just by pressing the button to lower such a curtain.

Roller blinds for the balcony pantry

Benefits in use

Installing roller shutters instead of doors has a number of advantages:

1. Savings on fittings and ease of installation;
2. Roller blinds come in different colors, with the possibility of photo printing on them.
3. Do not rust;
4. Louvered curtains give the room an aesthetic look;
5. They have soundproofing properties;
6. Resistant to temperature changes.

Doors with louvered grilles

There is a separate type of door with blinds already installed. At their core, these are ordinary wooden combined doors that can be hinged or sliding. They are distinguished from ordinary doors by the fact that instead of a decorative glass insert, lamellas or horizontal slats are installed in them. The main task they perform is the regulation of light transmission. This opens the view from one side of the door and becomes difficult on the other. A shutter door is indispensable in the office when the boss needs to control his subordinates.

Varieties of blind doors

Subtypes of structures

1. Equipped with fixed blinds. The slats in these doors are stationary;
2. Complete set with movable blinds. This option allows you to adjust the position of the slats and control the flow of transmitted light into the room.

Classification by lamella arrangement:

1. Horizontal. The main advantage of horizontal louvered doors is the view of the room in a straight line and to the sides of the doors.
2. Vertical. Only what is directly in front of the door can be seen through the open slats.

An important advantage of wooden louvered doors is simplicity and the possibility of self-production.

Do-it-yourself alteration of an ordinary door into a blind

It is not difficult to make jalousie doors; it is enough to alter the standard door leaf and install lamellas instead of the decorative insert. The process takes place in 3 stages:

1. Remove decorative insert. The glass is removed by removing the glazing beads. For safety, you need to start with the lower and side glazing beads, ending with the upper;
2. Using a router, cut out the slots for the lamellas, before that, make careful calculations of the location and angle of inclination;
3. Insert the lamellas and glue them with PVA glue.

To give the door a finished look, slats are filled with furniture studs along the perimeter of the blinds.

Louvered doors have become widespread in our country relatively recently. But thanks to the ease of installation, unusual design and other advantages, more and more preferences are given to this particular type, and not only as interior doors, but also as entrance doors. In this article, we will look at the main types of shutter doors, as well as how they can be installed independently in the room.

Venetian blinds

For the manufacture of boxes for louvered doors, a wooden frame is used, and as strips can be used:

• the cloth;
• plastic;
• wood.

Such doors are the basis of the American style in the interior. Typically, the structures are non-adjustable or adjustable lamellas fixed to the door frame. Today, more and more often you can find the following types of louvered interior doors:

• hinged - the doors open in one direction, are attached along the vertical side of the box.
• sliding - consist of a system of guides along which the door leaves go.
• accordion - a kind of sliding doors that fold according to the blinds principle.

Wooden doors look more aesthetically pleasing, the pattern of natural wood gives the interior a special comfort. Plastic counterparts stand out only for their price.

In addition, according to the location of the strips, there are:

• vertical blinds-doors. They are most often used for accordion doors with narrow strips.
• horizontal doors. The most standard option for this type of door. Through them you can see a panoramic view of the adjacent room.

Advice! Louvered doors are ideal for a bathroom, thanks to the sliding lamellas, you can regulate the removal of humid air.

Entrance jalousie doors

Such models are made of metal. They are protective roller blinds that rise in the horizontal direction. This design has a number of advantages over traditional metal doors:

1. Metal shutter doors weigh much less, so you do not need to install reinforced awnings and massive frames for them.
2. Such doors have an electrical device for ease of operation;
3. Breaking open such doors is harder than ordinary ones.

For louvered doors, lamellas with a width of 45-77 mm are used, from a hollow or filled profile. Hollow profile doors are lighter, and inside the filled one there is a foam rubber layer, which creates additional sound and noise insulation.

Attention! The wider the bar in the roller shutter doors, the more reliable they are.

Benefits of louvered doors

Installation of louvered doors

Consider the installation of accordion doors:

• We prepare the doorway. Remove old plaster from the surface if it crumbles. If the doorway is smaller, use extensions and bars to obtain the desired width.
• We prepare the guide profile, measure the required length, cut off the rest.
• We fasten it to the opening with self-tapping screws.

• We assemble door panels according to the instructions that should be attached to the purchase.
• We attach in the center of the upper end of each section, special runners, which are sold in a set with a door.
• We attach the lock, handle and latch to the assembled door.
• We turn the guide so that sliders are inserted into it.
• Finally, we fix the top rail.

Advice! For constant air circulation in the room, leave an opening 5-7 cm wide at the bottom of the door.

Louvered doors are not only a beautiful and stylish part of the interior, but also useful. They do not interfere with the entry of fresh air and light into the room. In addition, these doors are very easy to adjust and install independently. And sliding shutter doors help save space.

Installing an accordion door in the kitchen: video

Louvered door: photo