Everyone is used to treating their home as a fortress, a cozy place where you can escape from the hustle and bustle of anxiety. It is doubly more pleasant when your own dwelling is inhabited, everything in it is done at the request of the owner and the necessary things are at hand. It is pleasant to return to such a house after a working day or a long vacation, the atmosphere in it is soothing and bewitching.

In contact with

You can ennoble your own home with your own hands. Homemade products for the household - this is not just an interesting idea for author's design, such things are gaining popularity in the world and even the most famous designers are hunting for masters who are able to make a real work of art. In addition, such lovely organizers seriously facilitate cleaning, help organize materials for hobbies, books, trinkets and jewelry. There are a great many options for DIY home crafts, each author brings something of his own to the project, but in the end you always get something warm, homely and cozy.

DIY home organizer options

There are several variations of various crafts made of metal, clay and plastic, but all of them are aimed at a single goal - to make a person's life in the house easier and more comfortable. therefore all DIY home crafts can be roughly classified into:

In the end you can make a craft just like that without bothering to find useful uses for it. In the end, making useful things for the house with your own hands from wood, metal, plastic, or - this is just a hobby, which, however, can become the main business.

As for where to get materials and tools, fortunately, the modern market infrastructure allows you to find absolutely everything for needlework or carpentry in the nearest store.

Tool box stool

Among homemade homemade products that you can do yourself, toolbox- this is perhaps the first thing a home craftsman should do. Such a stool is extremely functional and easy to create, the cost of consumables is incomparable with the market price of a good chair, and due to its extremely primitive design, the bench will last quite a long time. All that is needed in order to make such a homemade product for the house is:

• screws, 20-26 pieces;
• sleds, 4 pieces;
• block of wood, 17 pieces;
• wooden panel, 9 pieces;
• screwdriver, hammer, varnish, brush.

A tree for such a homemade product should be chosen that is simple to work with, that is pine or beech... Hard woods are highly undesirable, for example, oak, which is incredibly difficult to work with at home, not to mention the fact that doing full processing with your own hands is a time consuming task.

From the bars, you need to make four U-shaped blanks, one larger than the other. This is the base of the bench and sled steps. Then you need to strengthen the legs with an additional bar. For the step on it, fix the slide on both sides. Make a niche in the form of a small box under the stool seat, then screw on the side panels. Cover the finished homemade product with varnish.

Cooler bag

Such a homemade product will come in handy on any hike.... It is unprofitable to buy it, since the cost of even the simplest is higher than the price of consumables. And in order to make a bag yourself, you only need a few simple elements:

• a roll of insulation;
• old bag;
• scotch tape and scissors.

It is recommended to choose from insulation options foamed polyethylene widely used for household purposes. Enough 1-2 meters of this material. From the insulation you need to make a cross with a central part, and then pack it in an old bag. It is better to cut off the "lid" of the homemade product and attach it to tape, fill the side joints with the remnants of insulation or foam rubber. You can make such a homemade product yourself in 20 minutes, no more, and in terms of efficiency it is in no way inferior to store counterparts, since insulation is an excellent insulating material.

House-scratching post for a cat

House-scratching post made of wood- This is the most productive way to keep all other items in the house intact by giving your pet a new toy to be torn apart. It is quite simple to make it, since there are many variations of the project. For the entry-level, one house with a cylindrical scratching post is enough. This will require:

• wood panel, 5 pieces;
• cylindrical bar, 1 piece;
• wooden lath, 12 pieces.

The simplest is a house with a square roof, but a more complex project can be performed for a pet - with sloping top or several levels.

Before work, wooden elements should be covered with a carpet, it is better to do this with self-tapping screws, but making sure that their tips do not look out and do not damage the pet's paws. One of the panels will act as a base, the "foundation" of the house is mounted on it - 4 slats, a panel is fixed to each of the slats, then another level of slats should be added from above and the structure should be covered with a roof. Installation takes place on corners or screws. An entrance should be drilled or cut into the front panel. Fix the cylinder near the entrance, and then wind the string around the special glue.

There are a lot of options for useful crafts, most of the options are copyrighted and were invented literally out of necessity, that is, to solve a specific problem. In order to come up with something of your own, it is enough to overcome laziness and pay attention to those problems that interfere with living in your own home, and then solve them on your own, because it is very pleasant.

Homemade products for the household will help to make the house cozier and more comfortable. Handmade devices, decorating old household items will allow you to give a second life to things, which will significantly save your budget. It will also allow you to decorate the environment, make the interior more creative. Some homemade products for the household will visually increase the space and create comfort.

Folding armchair

There is not always a financial opportunity to purchase some furniture in the store. You can successfully get out of this situation if you make crafts with your own hands. For example, it is enough just to make from and

The folding part (chair legs) is attached with hinges or sits on a metal pin, which is fixed with nuts from the edges. The tarpaulin is cut with two rectangles, with grooves for the bars on the sides. The side parts of the top of the chair (backrest frame with armrests) are made in the form of the letter "L". They are connected with bolts or self-tapping screws. It should be remembered that the folding bottom part must be locked in the working position. Therefore, not far from the connecting pin on the legs of the chair, you need to attach a metal hook - it will stably close this structure.

Who cooks porridge in the little house, gathers guests

Craftsmen familiar with a saw and a drill can even make a children's room in a small apartment. To do this, you need to build something like a screen with doors and windows from plywood or other fairly light material. The corner joints of the slabs will mimic the corners of the house. Having painted a homemade screen accordingly, the master will turn it into a miniature children's teremok.

You just need to make sure that this screen can be firmly attached to the walls. After all, the safety of children is above all! And inside, a children's table, a crib, and a box with toys will fit quite well.

And you can even sew any bright fabric that can be simply hung on a rope, wire or hard cornice is quite suitable for such walls.

Knitted furniture

Today, it has become extremely fashionable to make benches. They use such homemade products for the household, storing various items inside: toys, bedding, pots, cereals. They can be placed in the kitchen, in the nursery, or in the living room. They are also very convenient for relaxing both in a city apartment and in the country.

To make furniture with storage boxes, you first need to make a frame for it. The bench consists of a rectangular box fixed on legs. The soft part is knitted in the form of a rectangular parallelogram without one base and put on the lid. An elastic band can be inserted into the lower part so that the elegant "upholstery" is pulled together at the bottom of the bench.

The pouf can be made both square and cylindrical. To do this, vertical posts are stuffed around the circumference of the lower wooden base, which are then connected on top with thick wire. Plywood shields are stuffed between the racks so that things do not fall out of the "storage".

The upper round base is cut out separately. The soft part is knitted in the form of a cylinder, fixed on the upper part of the pouf. It is put on top of the pouf like a hat box lid.

Use of used clothing in homemade products

Anyone who has a collection of useful tips for the household should definitely make the following entry in it: “Do not throw away the thing before you are convinced of its complete dilapidation. Try to give each item a second life! "

Old clothes, for example, can be knitted or woven into creative upholstery. Unnecessary tights are widely used, which are cut in a spiral, slightly stretched to twist the strip into a tube. You can use other material, also cutting it into strips and stitching them together. The "yarn" is wound into a ball, from which it is then knitted with the fingers or woven into a cloth.

Knitting without needles repeats the algorithm of regular knitting. Only the loops are held directly on the toes. And the pulling of the thread is also done by them.

For weaving, you can use a frame around the edges of which nails are stuffed. The thread is first laid crosswise, clasping symmetrically located nails. They should all cross at one point in the middle of the frame. Then the end of the thread from the material is tied to the center and they begin to weave the canvas in a circular way.

And the old refrigerator is in business

As a homemade product for a household, you can use large household appliances that have served their time. And then, instead of the dreary pulling of a washing machine or refrigerator to the trash heap, a creative necessary thing may appear in the house. It will be both beautiful and useful.

The technique of converting refrigerators into incubators has long existed. However, such a thing is required only for those who are engaged in poultry farming and live in rural areas. But such original homemade products for home and summer cottages from refrigerators, such as chests tied with fabric threads, will become a decoration of the home and will allow you to hide many useful gizmos in them.

To make this piece of furniture, you need to remove the motor of the device. If you now put the refrigerator with the door up, then the frame of the chest is almost ready. It remains only to tie the cape and sew a foam pad on its upper part, cutting a hole in it where the handle will hide.

The cape should be made in the form of a rectangular parallelogram without a lower base. To make it easier to use the chest, you can sew a zipper lock into the side.

It's about painting - everything will be like in a fairy tale

Non-working refrigerators can also be easily converted into lockers. One has only to conjure over their decor. You can make a creative piece of furniture in a cartoon style for a nursery or a fantasy style for a hallway, in an antique style for a living room or in a music room for an office. It all depends on the fantasy of the master.

Although the working refrigerator will become more creative if you paint it or stick an original film sticker on the casing. This will also protect the surface of the unit from scratches and corrosion.

Kitchen appliances decor

You can simply decorate not entirely new household items with stickers, applique, or paint pictures on the paneling with paints for metal surfaces. The thing will again become pleasing to the eye and sparkle with fresh colors. In just a few hours, you can completely change the look of the kitchen, even without making homemade products for the household from scratch.

Microwave ovens, washing machines, cabinets and pencil cases are decorated with both picture-drawings and voluminous decorations are glued on them.

Each person, using his skillful hands, can create unique and even luxurious items for his home. One has only to think a little and make an effort.

It's nice to see when a person has made all and other household items with his own hands. To simplify the process of cutting metal or sawing out elements from wood, they build homemade machines and devices for a home workshop. Such a solution saves not only time for the manufacture of products, but also money for the purchase of finished products. We will consider several practical and interesting options below.

DIY pipe bending machine

Read in the article

How to use homemade machines and tools for your home workshop

The use of homemade machines and devices for a home workshop is aimed at solving several problems:

• Simplification of the metal processing process. In the course of creating household items, a metal cutter or press is often required.
• Improvement in wood processing. Even to build a small shed or make a wooden one, others are needed.

Buying a ready-made tool is quite expensive, so the use of home-made machines and accessories for the garage is becoming more and more relevant every day. Among the most common home tool options are:

• carpentry workbench;
• device for quick sharpening of knives;
• device for sharpening metal drills;
• drilling machines;
• Press;
• cutting disc machines.

Here are some photos of do-it-yourself tools and devices from "homemade products":

1 of 4

Practical do-it-yourself tool shelves

Before creating the devices and with your own hands, determine the storage location for all the devices, so that later you do not have to search all over the workshop or where what lies. It is not difficult to make a shelf for tools with your own hands, the main thing is to decide on its dimensions and material of manufacture.

The easiest way to make shelves is to assemble them from wood. Do not forget about the need to cover the finished structure with a protective varnish or to prevent wood from rotting and swelling.

You can create a combined version of a metal support and wooden shelves. Here are detailed instructions for creating such a homemade model:

Image	Sequencing
	Assembling the frame. To do this, prepare two side frames, consisting of 4 corners. Connect the elements with. Then, pull 2 ​​frames together using 4 corners.
	When the frame is completely assembled, proceed to making the shelves. They can be made from wood or metal, as well as from other available dense materials. It is enough to cut the canvases of a suitable size and fix them on a metal base.
	If you wish, you can make the rack movable by fixing four small wheels. Or install it firmly in the designated spot in the garage.

You can find other interesting projects and drawings for the manufacture of tool shelves. Watch a video on the topic:

And also make useful household appliances with your own hands:

1 of 4

We make a carpentry workbench with our own hands according to the drawings: video instructions and photo examples

Among the common devices with their own hands, a workbench is distinguished. Strong and dimensional, allowing you to securely fix the workpiece, useful for high-quality cutting of wood and the creation of various elements from it.

The package includes:

1. Working surface. For it, a solid is used to increase the service life of the device. The thickness must be at least 6 cm.
2. Supports. Collected from wooden beams or metal plates. The main task is to ensure the stability of the entire mechanism.
3. Vise for fixing the product. If the table is long, you can install two vices at once.
4. Tool box. Useful recess or pull-out design for quick access to the small parts you need.

To independently assemble a carpentry workbench for your workshop, you should choose a drawing, purchase material for work.

DIY carpentry workbench drawings

Before buying materials for assembling your own workbench, you should think about a detailed drawing. It should include the dimensions of the machine itself, it is advisable to note the dimensions of the materials used and their quantity.

For example, a ready-made drawing of a folding workbench with your own hands may look like this:

Whichever model you choose to create, consider several features of the desktop that make it easy to cut wood:

• the growth and length of the hands of the master: the height and width of the tabletop depend on these parameters;
• which hand is working: place a vice to the right or left;
• what blanks will be made: selection of the table shape;
• what area in the room set aside for the workbench.

Considering all these parameters, it will be easier for you to decide on the drawings of the joiner's workbench and the dimensions of the machine. Here are some interesting examples:

DIY instructions for assembling a wooden workbench

You can buy a wooden workbench in a store or through online catalogs, but it's cheaper to make one yourself. Let's take as a basis a simple version with typical tabletop dimensions: length - 150-200 cm, width 70-120 cm.

The manufacturing work will include several stages:

Image	What need to do
	Make the top cover from thick ones so that you get a shield with a width of 70 to 200 cm. Fasten the elements with long nails, and you need to drive them in from the outside, and carefully bend them from the inside. The working surface of the workbench is made only of wood or.
	Sheathe the lid along the lower perimeter with a 5 x 5 cm bar. This will make it more convenient to attach the vertical supports. The location of the supports depends on the size of the tabletop. It is better to make them from a thick rectangular bar of at least 120 by 120 mm.
	It is necessary to install the carpentry workbench correctly. Be sure to secure it firmly. If it will be mounted outdoors under a canopy, then dig holes for the supports. Use other fastening methods indoors.

When the structure is assembled, install a vice on it. To fully understand how to assemble a carpentry workbench with your own hands, watch the video:

Making a joiner's vice for a workbench with your own hands

Professional "homemade products" assemble not only tables for work, but also a vice with their own hands according to drawings. Any design of such a clamp will include several elements:

1. Supports where each one falls with a clamping jaw.
2. Moving clamping jaw.
3. Metal guides. A sponge moves along them.
4. Lead screw for moving elements.
5. Vorotka. Required to rotate the screw.

When making homemade vices with your own hands, you can use various materials at hand. For example, there is a design option from a profile pipe. To do this, prepare several pieces of pipe of different sizes, a steel stud with a coarse thread and double nuts.

Instructions for creating a vertical vise from a profile pipe:

Image	What need to do
	The largest pipe acts as a body. Supports are soldered to it from below. On the back side, a 3-4 mm steel flange is put on. In the center, a hole is drilled for the running nut, and opposite the front support, the rear jaw.
	On the inner movable part, the front steel flange. A stud is mounted in it, with lock nuts fixed to it. Thrust washers are put on both sides of the flange. The last element is a movable tube attached to the front jaw.

And also watch the video "do it yourself vise at home":

DIY metalwork workbench drawings

Locksmith's metal workbench does not differ much from the carpenter's workbench. It is based on a rigid metal frame, not a wooden frame. A vice is attached to it, and the entire workbench is designed to withstand the force of a blow with a sledgehammer.

Do-it-yourself metal workbenches can have one, two or three pedestals, and also do not have shelves and drawers for small parts. In terms of strength, for working in a garage, you can make a regular table of metal up to 5 mm thick and a reinforced structure, where sheets from 10 to 30 mm are applicable.

Here are some useful blueprints for making a metal workbench for your workshop:

How to make a tool for sharpening knives with your own hands: drawings and photo examples

No house can do without a knife in the kitchen. It is quite difficult to make the correct one without special devices: it is necessary to maintain the desired angle and achieve the ideal sharpness of the blade.

A certain sharpening angle must be observed for each knife:

1. The razor and scalpel require an angle of 10-15⁰.
2. Knife for cutting bakery products - 15-20⁰.
3. Classic multifunctional knives - 25-30⁰.
4. For hunting and hiking, take a device with a blade angle of 25 to 30⁰.
5. If you want to cut hard materials, then sharpen at an angle of 30-40⁰.

To provide the desired angle, it is worth buying or making a sharpener. For example, you can assemble a sharpener with your own hands.

A comment

Tool selection specialist "VseInstrumenty.ru"

Ask a Question

"If you do not use sharpening every day, then 1000 rpm is enough for a high-quality result and a long service life of the device.

"

To assemble such a machine, a 200 W washer motor is useful. Completely to create a sharpener from an engine from The progress of work on creating such a simple device will be as follows:

• Sand the wood blocks with sandpaper to remove any burrs. Make the markings depending on the angle you want.

• Attach a stone to the drawn line to sharpen the blade. To do this, attach it to a block and mark its width. Then, on the markings, make cuts, up to 1.5 cm deep.
• Fasten abrasive bars into the resulting grooves so that the grooves coincide. Then, install the sharpening stone by screwing it onto the bolts.

There are many ways to make a home knife sharpener. Pick the right one and try to create a convenient and useful tool for your home.

How to make a tool for sharpening a drill for metal with your own hands

They independently make not only a sharpener for blades, but also a machine for sharpening drills for metal. Here are some blueprints that are useful for the job:

Ready-made home machine The simplest and most common version of such equipment for a garage is a converted drill. For work you will need:

• bed for the base;
• rotation mechanism;
• vertical rack.

For the stand, either boards are usually used. The weight of the drill is small, so there is no need to use metal. In this case, the bed must be made massive in order to reduce vibrations during the operation of the device.

To correctly connect the bed and the vertical rack, as well as assemble all the equipment into one whole machine, pay attention to the video instruction:

Drawings with dimensions for a drilling machine do it yourself

To correctly make any machine or practical device for private use, you should first make a drawing with dimensions. Only then proceed with the preparation of materials and assembly of the device.

Here are some examples of drawings of drilling machines from a drill with your own hands:

And you can also make a homemade vise for a drilling machine. Below is a video instruction for assembling such a device:

Article

Crafts made from old objects and things to which you can return a second life can make your home much more comfortable. Some do-it-yourself homemade products for the household can significantly save the household budget, facilitate work, or make the surrounding interior more interesting. And even if difficulties arise in the process, overcoming them will be worth it.

Homemade products for a home workshop

In almost any home there is always some set of tools necessary for the household. But sometimes situations arise when, to work in your own workshop or garage, you need some kind of device that cannot be purchased in the store or it is very expensive. In this case, you can find a way out by making it yourself.

Balloon Forge

This metal heating device will become an indispensable assistant in your home workshop. The forge can be safely used to make original items using artistic forging. These will be truly unique forged items.

For the furnace, it is best to use an empty 25 liter gas cylinder. Its ends are cut off with a grinder, and the furnace door and its rear part will be made from the cut parts. The inside of the cylinder is covered with refractory ceramic wool, which is able to withstand temperatures over 1200 0 C. From above, it is coated with fireclay clay (lined), which can withstand temperatures up to 1500 0 C. After lining, fireclay slabs or refractory bricks are placed on the bottom of the hearth.

A hole is drilled from above and a small squeegee is inserted, allowing the nozzle of a gas burner to be inserted, which can create a temperature in the hearth of more than 1000 0 C - quite enough to heat the metal to a certain temperature suitable for forging.

Dismountable garage crane

In the manufacture of such a lift, the cash costs will be much less than buying a factory model. To make it, you will have to spend only on materials, half of which, perhaps, can be found in the garage.

Materials required to assemble the lift:

1. Two racks - profile pipe 100x100x2350.
2. Cross bar - a steel pipe of any length with a diameter of 100 mm.
3. Four supports for the bar - profile pipe 100x100x600.
4. Base and braces - corner with 100 mm shelves.
5. Two metal rope rollers.
6. Four wheels for movement.

For the hoisting device, it is best to use a worm gear hand winch with a maximum load of 500 kg, which is attached to one of the crane legs.

The design does not take up much space in the workshop, easily moves on hard surfaces and is quite convenient for removing the engine from the car.

Mobile tool rack

The main highlight of this rack is its small size., but at the same time it is possible to place a large number of tools on it, and if necessary, quickly move it to any place or adjacent room. It is very convenient to use such a rack in your workshop or when carrying out construction and repair work in large rooms, especially when you often need to carry tools.

The rack can be assembled on the basis of a collapsible plastic rack mounted on a homemade platform with wheels (cart). The platform is made precisely to the dimensions of the rack from a metal corner with 45x45 mm shelves or a sheet of plywood with a thickness of at least 10 mm. Furniture metal wheels are used for movement.

In addition to the rack, you can make and fix fasteners for building levels, extension cords and other tools that can be stored in a hanging position.

To help the hostess

There is not always a financial opportunity to buy, for example, something from new furniture in a furniture showroom or place an order for its production. But you can always get out of this situation by making the right thing with your own hands, while making it attractive and unique, using available means for this.

Cork backsplash

A backsplash is a wall surface located between a worktop and wall cabinets. Usually this part of the wall is tiled. But to cover it, it is possible to use many other materials, for example, to glue wine corks on the wall.

This exclusive decor looks pretty gorgeous.

Before gluing, each cork is cut lengthwise into two halves with a sharp clerical knife. It is advisable to paint the wall black, which will accentuate the seams between the corks.

The corks are glued to the wall using liquid nails in a checkerboard pattern or with a certain pattern, since it is unlikely that they can be laid out perfectly exactly, and the curved rows will visually look disgusting.

The corks themselves are not afraid of moisture, but they quickly get dirty and poorly washed, so it is best to cover them with a glass screen made of tempered glass. True, you will have to spend a little money on it and order glass in a special workshop, where they will cut it to a given size and make holes for sockets and fasteners.

The glass is fixed to the wall with anchor dowels, which can be purchased at almost any hardware store.

While an apron decorated with wine corks can be expensive, the results achieved will be worth it.

The surface of the countertop, as well as the wall, can be decorated with corks and covered with tempered glass.

Hinged folding table

A folding table mounted on the wall allows you to save some space in the apartment. In the unfolded state, it can protrude from the wall at a distance of no more than 10 cm and does not interfere with anyone at all, but when unfolded it can replace a full-fledged table.

There are many options where you can use a folding table fixed to the wall. Here are just a few of the most basic ones:

Shower for giving

Probably, there is nothing better than freshening up under the running water on a hot summer day, especially if he went to work in the garden. Naturally, only a shower will solve this problem and relieve the fatigue that has accumulated during the day.

The shower can be installed independently without the involvement of outside help, the main thing is to choose a place for it and decide on the type of shower cabin.

Three types of cabins stand out among summer showers., which you can freely build on your own:

Installation of a simple shower is done in this way:

1. The frame of the shower stall is made, which can be assembled from metal, wooden beams or other materials at hand.
2. A metal or plastic water container is installed on the roof of the assembled frame, which can have a volume of 50 to 200 liters.
3. It is advisable to paint the metal container black for better water heating. Additionally, several electric heating elements can be installed in the container, then the shower can be taken even in cloudy weather.

The booth can be sheathed with boards, plywood, slate, or simply covered with tarpaulin or cellophane wrap with folding canopies.

For self-construction

The topic of construction or renovation probably worries everyone. And, of course, everyone who deals with it wants to finish it as soon as possible with minimal financial costs. Therefore, if you want to save money, you can make some materials for construction on your own. For example, it can be wall SIP panels or such a useful tool as a vibrating plate, the need for which often arises for many owners of a personal plot.

Homemade SIP panels

For their manufacture, you need to prepare a flat, hard platform. Laying on it a sheet of OSB with a thickness of 10-12 mm with a rubber spatula with teeth, apply glue to it.

Then lay sheets of 25-30 grade foam plastic on the glue. After that, on top of the laid foam plastic, as well as on the bottom OSB plate, an adhesive mass is applied, and the second OSB sheet is laid on top.

If several boards are being made at the same time, stacked in a pile, work should be done quickly, until the glue hardens. Usually, in this way, no more than 4-5 panels can be prepared at a time.

After the blank for the formed slabs, you need to create pressure using a press. Since, naturally, there is no hydraulic press at home, it can be replaced with a thick plywood sheet laid on the prepared SIP-plates over the entire plane and loaded for 2-3 hours, for example, with several bags of cement, sand or other cargo. You can even use a passenger car, driving onto a plywood sheet along a pre-made overpass.

After the glue has completely dried, the homemade panels will be ready, they can be folded into a separate pile and start preparing new panels. The manufactured panels should lie already without load for another day, after which they can be used for their intended purpose.

Vibratory plate manufacturing

To make a homemade vibrating plate, you will need to prepare:

1. An electric motor with an eccentric of the IV-98E brand, which is the main part of the vibrating plate.
2. Steel sheet, at least 8 mm thick, size 450x800 mm. It can be ordered at any metal warehouse.
3. Two pieces of a channel with a length of no more than 400 mm.
4. An inch tube for the handle and two rubber grommets for attaching it.
5. From the tools you will need a welding machine, a grinder and a set of wrenches.

On the narrow sides of the slab, stepping back 80-100 mm from the edges, make an incision with a grinder to a depth of about 5 mm. After that, bend the edges towards the notch at an angle of approximately 25 0 and weld them. Bends are needed so that the vibrating plate does not sink into the material it compresses and moves freely along its surface.

Then, across the plate at a certain distance, calculated for the fastening of the electric motor, two channels are welded with the shelves down. An electric vibrator is attached to them through the pre-drilled holes in the channel using M10 bolts.

The tube-shaped handle attaches to the vibrator through soft rubber grommets available from your auto store or hardware store in the hardware department.

Thus, you can make a lot of useful things in the household with your own hands, spending only part of the money that would have to be paid when buying a finished product. You just need to make some effort and have certain skills.

Nothing brings joy to the house like a handmade thing. Indeed, various homemade products for the home not only fill life with bright colors, but also give the interior a unique and a kind of zest. And it is certainly impossible to forget about such a thing (let it be a small trinket). And it is not so important that these are homemade products made of wood for the house, made of paper or plasticine. There are millions of options and methods for making various gizmos, and today we will consider a few of them. So how do you make interesting homemade products for your home?

Shelf from tin cans

It would seem that such a trifle is a can of coffee. However, even from it you can make a beautiful, convenient and useful shelf for storing household items. Often, various souvenirs and memorable photographs are stored in such containers. There is little practical use for this homemade product, but such jars look very harmonious.

Details about the manufacturing procedure for this craft

1. First, holes are punched in the jars with a drill or a special ripping knife (in the upper and lower - 3 points each, and in the walls of all the others - 2 points each).

2. Next, the jars are fastened together. Small nuts and screws are used as fasteners. By the way, to get the desired (beautiful) result, you will need to have at least 5-6 such jars.

3. After that, a hole is made in the containers for the screws. In the bottom of the jars located in the upper part of the structure, 1-2 holes are made for attaching the shelf to the wall. The finished homemade product is screwed with a screwdriver or screwdriver. Previously, dowels are driven into the wall for this.

That's it, now homemade products for the home are being put into business. Be sure - various little things in such jars will definitely not get lost. Thus, you kill two birds with one stone - decorate the interior and get rid of the clutter in the house.

DIY homemade - how to make a clock on a CD / DVD?

A clock on a CD is also a very interesting and original option for decorating an interior.

As you can see, the design of this device is very original, and therefore it will look organically against the background of any interior (it may become its highlight). Such "smart" homemade products are made for the house in a matter of minutes. We will tell you in more detail about all the stages below.

So how to make a homemade watch with your own hands? To begin with, you will need to prepare the appropriate materials - a CD / DVD CD (you choose the design of its front part at your discretion) and a case cover for it (the distance between the walls should be at least 0.05 centimeters). It is very important that the last part does not have any chips or scratches. To facilitate the work, you can purchase a ready-made watch and then simply replace the standard dial.

It must be a pointer, otherwise it will not work to make a homemade product. You should also make numbers. There should be a total of twelve of them. These can be cardboard, paper or plastic circles. Their thickness should not exceed two millimeters. Rhinestones can be used as decorations. You also need to prepare about 30-40 centimeters of wire, a piece of leather or fabric and superglue like "Moment". The main part of this whole construction will be a CD-disk. We will redo it in the first place.

First you need to mark the disc into twelve equal parts and glue the numbers on the marked points. In this case, the sectors should not go beyond the outer diameter of the device. How are homemade products made for the house further? After the sectors, we proceed to the clock itself - remove the arrows and place them exactly in the center of our disk. By the way, before attaching them, you can stick some interesting photo on the disc, which will make the watch design even more original.

Use thin metal strips to increase the size of the arrows. To achieve the desired result, it is enough to apply glue on them and carefully position the part evenly over the entire surface of the guiding elements. The arrow mechanism itself is attached to the back of the disc.

What to do next?

So, the base of the watch is almost complete. The next step is to make holes in the device along the contour of the arrow mechanism. The field of this disc is installed in the case. The mechanism itself is brought out through the hole and tightly closed. Now, with the help of a wire, an emphasis is made, which is glued to the back cover. To make it more durable, glue a piece of fabric or leather on top of it. This will make the emphasis not only strong, but also beautiful, since the extra part of the wire no longer gapes on the clock as before. Everything, a self-made watch from a CD has been successfully manufactured. All that remains is to insert an AA battery and set the time. By the way, the battery can also be made by hand.

How to make an energy source from lemon?

As we know, this fruit contains a lot of acid, therefore, with the right actions, a lemon can be turned into a real mini-battery.

Of course, the charge from such a "battery" will not be enough for the operation of household appliances, but this current is quite enough for the functioning or charging of a mobile phone.

Making homemade products for the home - preparing tools to turn lemon into a source of constant energy

During the work, you will need tools such as a knife, a soldering iron, a drill, an iron pin, and a few pieces of copper wire insulated. Among other items, it should be noted the need for one glass or shot glass, a pair of wooden sticks and the same number of pushpins. And, of course, our main source of energy will be lemon. You can also use an orange, but there is much less acid in it, so the charge from it will be minimal.

Instructions

First, cut the lemon in half. This is so that it gives more acid, which is necessary for the lemon to be fixed in the glass so that it does not roll on the table. Further, copper and iron pins are inserted into its pulp along the entire perimeter at a distance of 0.5-1 centimeters. Our minus will be iron, and our plus will be copper.

Pieces of wire are attached to all pins with a soldering iron. They will act as a power supply connector. All elements are connected in series.

At the final stage, sticks are inserted into the battery compartment. The polarity is important here. The contacts are pressed against the contact group. The container remains open throughout the entire charging process.

So, we figured out how to make useful DIY homemade products for your home. Good luck in your endeavors!