A rain shower: what it is, how it works and how to make it yourself. Rain shower for bathroom with mixer: features and selection criteria Rain shower do-it-yourself installation

In such a shower, due to aeration, the flow is divided into many small drops saturated with air bubbles, the direction of which is usually strictly vertical.

We can talk for a long time about the attractiveness of a stationary ceiling shower, but it is much easier to feel the comfort and anti-stress effect of its use at least once. If the choice fell in the direction of a tropical watering can - let's deal with the intricacies of installation and the device of rough plumbing for its correct connection.

What is the essence of a rain shower

A rain shower works differently than a simple shower head that emits thin, continuous streams of water. Due to the special design, water is mixed with air and immediately thrown out. Due to aeration, the flow is divided into many small droplets saturated with air bubbles, the direction of which is usually strictly vertical.

Do not confuse multi-mode headsets and heads with rain showers. Despite the similar effect, there are a number of significant differences. First of all, the difference in size is striking: the tropical watering can is much larger than the combined one, it creates a dense curtain of drops that practically do not dissipate. The width of such a rain column can reach half a meter, and sometimes even more. It is also impossible not to notice that most of the "zakos" for a tropical shower do not have aeration, and this is a very significant factor of comfort.

Another characteristic feature is the relatively low water consumption. Despite the fact that the watering can covers a really large area, the flow is represented by small drops, the density of which is reduced by air bubbles. It turns out that almost the whole body is in contact with a dispersed suspension of water in the air, but the flow is less than that of a standard watering can with a similar scattering area and flow density.

The subtleties of the arrangement of the shower

But let's focus on the nuances of editing. Planning the installation of a rain shower should be done in advance, while ensuring the required shape and dimensions of the shower compartment. Here, a major pitfall lies in the fact that a sufficiently long connecting pipe runs between the mixer and the shower. Because of this, the temperature setting, even with the presence of a thermostat, occurs with a significant delay, accordingly, you almost always have to move away from too hot or cold "rain".

In its simplest form, a tropical watering can can be part of an external installation - a stand with a mixer, which has an internal channel for supplying water to the watering can. However, this method of installation requires even more space inside the shower stall, because the installation already requires additional indentation from the wall. An alternative installation method involves laying the connecting channel hidden under the finish, respectively, it is necessary to provide for grooves or the corresponding values of the gaps when finishing the shower with false walls in advance.

It should be noted that it makes no sense to use hidden installation, if in the end the connecting fittings are not completely hidden behind the decorative trims of the finishing plumbing. Therefore, it is important to ensure the correct protrusion of the nozzles for fixing the mixer and the shower head itself. Ideally, if the shower installation kit is purchased in advance: this will reliably know the required conditional pipe clearance, the diameter of threaded connections and other conditions necessary for correct installation.

Laying of communications

For concealed installation, the tropical watering head is connected via a flush-mounted mixer, for example, the Hansgrohe iBox or any of its analogs. It requires the arrangement of a niche or false wall cavity with a depth of about 35–50 mm. This type of mixer is ideal for installation in the bathroom: in addition to the main outlet for a tropical shower, it has an additional one, to which you can connect a regular shower head or a bath spout. The need for additional drainage is quite understandable, because it is impossible to wash a certain part of the body or to clean in the shower without an additional watering can.

The water supply to the mixer is usually carried out from the bottom and from one of the sides. With concealed installation, the most preferable option for the plumbing system will be polypropylene pipes on press fittings as the most durable. Hot and cold supply pipes go to the mixer niche from below, then one of the pipes is turned for side connection. On the other, free side of the mixer, another pipe is laid, connecting the additional outlet with the wall-mounted branch pipe for connecting the shower hose.

In the surface-mounted version, the tropical rain headset has a standard connection with 150 mm spacing of nozzles. Such an installation is connected like a regular mixer and at the same time has additional attachment points to the wall. Very often, an open-mounted connecting rod (gander) is specially hidden in the wall instead of a draft-type connecting tube. This is explained by the high rigidity of the installation and the ability to carry out installation without an additional fastening system and numerous threaded connections. The mixer and the watering can are connected with a regular water pipe if the latter is installed on a threaded outlet fixed to the ceiling.

Installation of a concealed mixer

The so-called "ibox" has a cross connection scheme. The internal mechanism can be rotated in any way to change the destination of the nozzles. As a rule, the water supply is carried out from the bottom and from one of the lateral sides, an additional spout outlet is connected on the back side, and the tropical watering can itself is connected from above.

The mixer body is a cylindrical glass, which is fixed to the wall with four adjusting pins. To make it easier to reach the final plane of wall decoration, high-quality plumbing has a crossover ring on the outside of the body, which serves as a back stop for cladding false walls. Ultimately, the skin and trim layer is tightly clamped between this ring and the bezel. If the mixer is walled into a solid wall, the ring is removed.

The mixer connection is made on threaded fittings, which are packed with anaerobic sealant. The diameter of the connections is usually 1/2 ", respectively, there is no obvious need to use a pipeline with a wider nominal bore. After connection, the mixer is finally adjusted with pins to bring the front side into the finishing plane, then brickwork or sheathing of the false wall is performed. In the latter case, the remaining gap between the body and the sheathing is densely filled with sanitary silicone, then a waterproofing cuff sits on the sealant around the protruding sides.

The installation is completed after the shower tile is tiled. The details of the internal mechanism are covered by an overlay panel, which for many manufacturers has up to a dozen variations in the appearance and ergonomics of the controls. Protection of the interior of the mixer from water ingress is provided by one or more circuits of gland seals or gaskets along the contour of the panel. The panel itself is attached by twisting the decorative sleeves of the handles or using hidden clips.

Installation and connection of a watering can

The final part of the installation is the installation of the watering can itself. The least problematic is the installation on a bar that comes out of the wall. It is enough just to put a sealing gasket into the threaded connection and screw on the watering can itself. After tightening the screw connection, the shower head is positioned for its correct orientation (especially important for square shower heads) and horizontal position. Both tasks are accomplished with a ball-joint adapter.

The installation of the shower head to the threaded ceiling outlet is somewhat more difficult due to the limited space. In part, this problem can be solved by a decorative insert that acts as an extension cord. Its installation is not always possible, in some cases the ceiling height is a limitation, although an extension cord even 20-30 mm long will greatly facilitate installation.

Operating parameters of the water supply system

A rain shower is not suitable for every plumbing system. The first and most important criterion is the operating pressure of the system: for correct operation, both the upper and lower limit thresholds are limited. For different shower models, specific values may vary slightly, but the average is about 3 to 4.5 atmospheres.

To solve the problem of overpressure, you can use water reducers. For apartments with hot water supply, you will need two of them - each for the riser for the mixer to work correctly. Lack of pressure is more difficult to eliminate, while at low head aeration may not occur at all. You can build up pressure using a low-noise water pump with a soft start system or an individual water supply controller.

In addition to the noise from the operation of the pump itself, pressure shocks during start and stop can be a significant obstacle, so you have to take care of the correct setting of the pressure switch and supplementing the system with a hydraulic accumulator of the appropriate volume - 5-7 times more than the displacement of the entire water distribution system. Also, installing check valves at the inlet and outlet of the pumping unit will help to get rid of water hammer. published by

Who doesn't dream of being under a warm shower of hot equatorial latitudes instead of a shower? A novelty in plumbing - a rain shower that simulates the streams of rain in your shower or bathroom is able to give such a sensation. The manufacturers of such shower systems are vying with each other to promote the beneficial therapeutic effect of such a procedure, but what is the cost of such a pleasure? Or maybe home craftsmen are able to independently build a water supply system no worse than a factory one?

Description

The new "tropical" shower is simply a wide watering can in various designs, located fixed above the person. Unlike inexpensive options, quality products allow you to distribute the water flow evenly over the entire area of the shower head. Formally, a rain shower is called a whole plumbing system, consisting not only of a watering can, but also a mixer. A real rain shower is equipped with a system for mixing water with air inside the shower head, this effect is achieved using special grids or other structural elements inside the sanitary element.

Healing effect

The positive effect of a continuous flow of water in tropical shower systems has been used in sanatoriums for a long time. Typically, the use of tropical systems is associated with the use of different temperatures, as well as light and color therapy, the beneficial effects of music and even aromatherapy. The shower itself has a relaxing and light massage effect; drops of water, falling from a great height under the influence of natural gravity, gently envelop the skin, allowing the body to relieve the stress of a tiring day. A cool shower with jets of medium strength, on the contrary, is able to tune the body for vigorous activity, and a more powerful pressure of water tones the muscles.

Rain shower: types and manufacturing features

The simplest equatorial rain style water dispenser is a wide shower hose nozzle that measures 15 cm or more. Manufacturers provide many options for every taste and wallet, the most complex and expensive models are equipped with a mechanism for regulating the water supply mode, but such watering cans can only be called a rain shower. More expensive systems with a rain effect, in addition to a watering can, include a solid wall stand, the quality of workmanship of parts of such products is slightly higher, and some firms produce real works of plumbing art.

Many manufacturers offer a prefabricated system with a mixer, the latter, however, is not very different from standard bath models. For those who want to fully experience the effect of the "rain shower" system in the bathroom, and the types of simple transformations of the shower head do not suit him, they produce shower wall panels or special installations with ceiling mounting. Such options look very impressive if they are built in flush with the ceiling and equipped with additional LED lighting, which in some models is mounted directly into the shower head.

Water pressure

Before installing equipment such as a rain shower in your bathroom, you need to calculate the efficiency of the water flow. As you can see from the dimensions of the shower head, the consumption can be significant. The plumbing system must provide sufficient water for the tropical shower system to work properly. As practice shows, the pressure requirements of wide shower heads are not too different from the usual ones. There are water consumption standards for manufacturers of plumbing equipment, both Russian and foreign, which are not too different. The adjustment of the maximum water flow is carried out by filters or limiters built into the equipment, but what about the minimum values? A high-quality rain shower system needs at least 2 atmospheres of pressure to fully function, but you don't need sophisticated measurement equipment. You just need to take a stopwatch and a container with a volume you know. For a soft shower, depending on the size of the nozzle, a flow of 5-7 liters per minute is enough, while for powerful jets it will already take 9-15, if your system can provide such volumes, you can safely proceed to installing shower equipment. Otherwise, it is necessary to increase the water pressure in the system by cleaning and replacing pipes, removing the restraints or installing special injection pumps. In city apartments, such issues must be resolved by the house management structures or water suppliers, the water supply norms established by the state are quite capable of coping with a tropical rain shower system.

Replacing the watering can

The easiest and cheapest option to convert your bathtub or shower stall into an equatorial downpour source is to replace the shower head with a dedicated wide model. The full effect, of course, will be difficult to achieve, but you can refuse the services of specialists. Additional materials may require plumbing sealing tape to seal threaded connections, but usually the rubber gaskets included with the purchased attachment can handle any leaks without additional effort.

Homemade options

Home craftsmen are ready to apply their skills wherever possible, and can build a rain shower from scrap materials. A do-it-yourself watering can to get the effect of a rain shower is easily made from a container for optical discs, designed for 10 pieces. A plastic adapter for the shower hose is installed in the center of the base, the central axis of the discs is removed, and holes are marked and pierced on the upper surface of the cover: from 20 to 40 pieces. All joints and fasteners must be hermetically glued, and a piece of rigid tube or a bracket with thick wire can be used as a holder.

Depending on the resourcefulness and availability of materials, you can implement other versions of the rain shower system with your own hands. What can be made of, if not from standard plastic pipes completely and even with backlighting? This design implies a complete replacement of the watering can with several adjacent pipes with water holes. Making such a structure will require at least pipe joining skills, as well as other building skills and knowledge in the field of electricity. It is difficult to judge how profitable it is to use several pipes instead of a common collector for all nozzles, and the adjustment of self-made systems is limited by the capabilities of the mixer.

Rack, panel and mixer

Installing plumbing fixtures such as a rain shower stand with mixer or a dedicated wall panel should not be a problem for experienced DIYers, except in the event of installing new or additional pipes in the wall. The stand or panel is securely fastened to the wall with hidden screws, the mixer can be installed in the place of the old one, since the standard sizes are used in almost all models. Piping work is best done at the stage of repairing a room.

Shower construction

A thorough construction of a rain shower type shower requires hidden wiring of water pipes, especially since the installation of a nozzle at the level of the ceiling will also bring additional labor and material costs. Such bathroom equipment is highly dependent on construction experience and the availability of plumbing skills; experts recommend entrusting the design and execution to professionals. If you feel able to handle all the steps of installing a rain shower on your own, here are step-by-step instructions.

Construction stages

One of the main steps towards fulfilling an idea is purchasing the necessary equipment and planning. It is not worth saving on plumbing fixtures, after the work is completed it will be problematic to make adjustments, you must be confident in the equipment. The ideal purchase option would be models from well-known brands, manufacturers value their reputation and monitor the quality of their products. Reasonable design can also eliminate possible problems in the future, you should consider access to the main components in order to replace them in the event of a breakdown without dismantling the wall and ceiling coverings. Another condition for achieving the maximum effect from a rain shower will be a ceiling height of at least 2.3 m.

The next step is to clean the old wall coverings and, if necessary, the ceiling and floor.

After transferring the drawings from paper directly to the walls and ceiling, you can start laying pipes. The ideal option is to cut a groove for pipes; this installation method will maximize the saving of space in the room. It is possible to equip a separate shower area from moisture-resistant plasterboard, then the pipes can be "hidden" directly into the partition. Consider the entrance doors, for example, when installing models on casters, you need to reinforce the flooring under the lower runners.

The installation of special lighting may require an additional electrical line and the installation of related electrical equipment. It should be ensured that direct streams of water do not fall on the connection points and in general any non-insulated current-carrying parts of the electrical system. Ideal would be a hidden installation in the ceiling, which can be specially made for this purpose in a suspended or tensioned version. Apartment owners should foresee possible leaks from neighbors from above and protect those from below. To do this, it is necessary to carry out the enclosing waterproofing of the electrical equipment in the ceiling and the complete waterproofing of the floor.

The next step will be the installation and testing of all plumbing elements of the system.

After making sure that it is in good condition and correctly connected, you can start arranging the ceiling and facing the walls and floor.

Consumer opinion

On the Internet, they speak well of the new shower system. In most cases, reviews refer to wall-mounted speakers, sometimes assembled with a mixer, this is understandable, the happy owners of full-fledged shower systems of exclusive performance enjoy "on the sly". Obviously, the investment pays off in the form of positive emotions and other beneficial effects of a rain shower.

Everyone wants to equip their bathroom to the maximum, as well as create favorable conditions for bathing. Among the wide range of products, it is very easy to make a mistake in your choice, as we offer mixers with ordinary functions, as well as an original mixer with a rain shower that simulates rain. But even the second design option is divided into several types, but not each of them is suitable for specific conditions.

When buying this design for comfortable bathing, the primary attention should be paid to the material from which the mixer is made, the better it is, the more durable its operation will be.

Each manufacturer specializing in plumbing fixtures produces several types, and the most popular among the consumer is a shower rack with a rain shower and a mixer. Consider variations of the tropical type of fixtures equally involved in the arrangement of baths and booths:

Note! In addition to the listed varieties, there are already more advanced modifications. More expensive configurations have a touch panel, where a lever tap is no longer required or there are devices with a hydromassage function.

Some subtleties of choosing a design

A shower rack with a mixer can be installed in any type of bathroom: a bath or a bathing booth. However, in both cases, it is important to choose the right tropical version, where there is a watering can, taking into account its durability, equipment, to clarify whether there is a stationary shower mixer, and also to evaluate the appearance and design of the product.

After purchase and installation, the shower mixer with stand must be properly operated. This factor determines how long the communication will last in your home. To make it easier to monitor the condition of tropical showers, it is better to purchase stainless steel models: they are not susceptible to moisture and soapy deposits, so it is easy to remove such contamination from this material. Other materials are very often scratched, the top layer of the paint peels off, and corrosion begins. You should take care of systems where there is a watering can more often (it is most likely made of plastic covered with silver paint)

Pros and cons of tropical spout installation

There are positive and negative aspects of using this design. They can be used both for baths and for separate showers or open showers. They differ in the following disadvantages:

tremendously high price (due to which the consumer is ready to refuse communication);
takes up a lot of space, especially if the bathroom does not have large dimensions;
water consumption increases significantly during a one-time bathing, which is uneconomical for many.

But there are a number of positive aspects that should not be ignored:

hydromassage function, which has a complete relaxing effect on the body;
a wide range of designs (backlit, unlit, embossed, patterned);
shower counters without a mixer are equipped with a thermostat, which is useful when there are small children in the house;
you can install the structure and replace some parts with your own hands.

The mixer with a shower stand is easy to use, it allows you to comfortably take water procedures, without complicating them by constantly holding the watering can over your head for a full bath.

Installation of built-in and outdoor installations

The built-in structure, although complex in execution, nevertheless, it ultimately provides an aesthetic look for the design of the bathroom. Following the instructions, you can easily install the structure in your home. To correctly complete the installation, you need to proceed step by step:

we prepare a work surface to place shower racks with a rain shower of a flush modification;
using a perforator or an impact drill, we drill holes of the required length in the walls, pipelines will be laid in them to the watering can and directly to the mixer;
then we carry out the laying of pipes. It is better to use plastic structures, as they will last longer in the wall;
now we are engaged in connecting the tap to the hot and cold pipelines. It is better to do this using fittings or soldering;
we do the same with attaching the watering can to the ceiling, only for it you should first make a recess, taking into account the connecting elements;
when the shower system with a mixer is fully connected and checked, we lay the cut channels with cement mortar, then we level the surface and carry out finishing work (more often this is finishing with tiles on the walls, and plastic panels on the ceiling.

The service guarantee of such a structure is more than 10 years in the absence of mechanical damage and with proper operation.

Surface-mounted watering can and mixer: installation

A shower head with rain shower and mixer can be used for bathtubs and showers, if space permits. It is not difficult to install an external type, but here you need to be careful not to damage the fine finish.

It is better to put an open-type shower mixer and a watering can directly in the place where the communications were previously connected. Systems that do not have a mixer should be fitted with a thermostat and are best mounted using a flexible hose. In the course of work, it is important to control the entire process:

at the place where the shower rack will be mounted, make a markup, for this use a level, remember that the system must be installed strictly perpendicular to the floor, otherwise, due to slopes and bends, the water pressure will be disturbed, and the connecting elements are more likely to leak;
then we take the purchased model and assemble it according to the instructions supplied by the manufacturer;
further, we remove the shower model to the side, and install fasteners on the wall to which the rack will be fixed. Further, the prefabricated structure is simply fixed with these elements;
then it is connected to the hot and cold piping systems (they are connected to the mixer) using plastic fittings;
lastly, the system is tested for leaks and airing. If all is well, you can start operating.

Note! A shower mixer with a hand shower and a shower faucet can have additional functions, ideally if they have several hydromassage modes. And one more important point - the installation of watering cans with a rack should be located so that the mixer valves are at chest level.

For most people, acquaintance with a rain shower happened not so long ago, therefore, remaining, and today for many, a mystery, this term is associated only with the word "tropics", while it refers to one of the types of plumbing. This misconception raises many questions that can be answered in this article. It is important to understand what a rain shower is, to learn about how it works and to understand if you can do it yourself.

Special remedy for hydromassage

Probably everyone remembers how great it is to run down the street in the summer rain as a child. This creates a pleasant sensation, because from the rain, a person receives the energy contained in the flow of water, and the drops falling on the body help the muscles to relax. To create such an effect, a special type of shower was invented, called "tropical rain", as it successfully imitates a downpour.

When they talk about this plumbing device, they usually mean a huge watering can fixed to the ceiling. Many streams of water are enough to completely cover the entire body of a person standing under it. It is clear that it is simply impossible to obtain the same effect using a conventional nozzle attached to a removable hose. Among other things, the large spray heads have a water mode switch, which you can use to stand in heavy rain or relax under large raindrops.

Shower system options

At first glance, a rain shower, the photo of which is presented below, seems like a simple product, but it can be performed in different versions:

As panels, intended mainly for a shower stall.
As racks for taking water procedures in the bath.

Even the design of each of these options can be different:

Tropical Rain Panel... The model in this version is the most expensive, since in most cases it has a hydromassage nozzle that delivers water in small streams. Some models of such panels have a number of additional options, for example, different colors of the backlight, radio and much more. Despite the fact that a similar rain shower head is intended for a shower stall, it can also be used in bathtubs.
Installing such a panel in the corner of the bathtubs allows you to expand the functionality of the sanitary tank. This model has the advantage of being combined in one body of a watering can and a mixer.

Stand for tropical rain effect... This execution of the shower system is the most optimal in terms of price and functionality. The stand, like the panel, is quite versatile, so it can be installed both in the booth and above the bathroom.
At its core, the rack is a metal tube with fasteners for screwing it to the wall, at one end of it there is a spray nozzle that creates the effect of a rainstorm of warm tropics. To tell you the truth, this device is very similar to a regular shower with a flexible metal hose, only in this case the nozzle is much larger. Such racks can be with a flexible metal hose supplying water or with a pipe through which water is supplied to the watering can.
Faucet with rain shower... The main difference of this device is the spray nozzle with a diameter of 25 - 40 cm that comes with it.It should be said that due to the small width of the water flow, which does not cover the whole body, it is impossible to get the full effect of heavy rain from the device in this version.
Just like the stand, a rain shower with a mixer can be connected with a flexible metal hose or tube.
Shower head with rain shower function... This option is the most profitable for its low cost.
With this nozzle, you can create only a semblance of pouring rain, since such a watering can is installed on an existing hose. Even if it is possible to achieve the desired flow of water, then the result obtained will not be truly effective, but only slightly reminiscent of a warm downpour.

Having studied the above systems, comparing their capabilities and prices, we can come to the conclusion: in order to get maximum pleasure and benefit from taking water procedures, you need to make such a device with your own hands.

The technological process of assembling a tropical soul with your own hands

It is worth noting that of all the plumbing that you can assemble yourself, the easiest way is to make an overhead rain shower with your own hands. The assembly process is quite simple, and most importantly, nothing special is required. For work, you need to prepare a large watering can, a mixer and a water pipe.

You can, of course, perform an open installation of the system, but it is better to prefer its hidden installation, in which the mixer will be built into the wall. It is advisable to combine the installation of the system with the next repair, but perform it before the laying of the cladding begins, since it will be necessary to hollow out grooves in the wall. The embodiment of the idea of installing a tropical soul house should be carried out in stages:

At the first stage, it is necessary to lay out the pipes. Why is a system of several strobes built.
In the middle of it, a recess for a mixer is created. And already from the recess it will be necessary to take 4 strobes into which pipes will be laid, supplying water to the mixer, filling the bath and directing it directly to the watering can.

At the next stage, prepared pipes of the required length are placed in the grooves (it is better to choose copper products or polypropylene for hidden installation). The pipe to the shower head runs up along the wall and slightly along the ceiling all the way to the location of the spray arm.
On the ceiling, it can be laid in a gutter or fixed with metal clips. If in the future it is planned to install a false ceiling, then the pipe is not brought to the main ceiling. Suspended ceiling structures allow you to hide the pipe, leaving only a watering can on the surface.
At the last stage, a nozzle and a lever for controlling the mixer are installed. When screwing the spray nozzle onto the pipe, place tow or FUM tape.

After the watering can is securely fixed, you can take water procedures, but it is still better to do this when the repair work in the bathroom is completely completed.

Rain shower in the bathroom interior

Ceiling shower heads, produced under well-known brands, are mainly represented by hinged shower heads, lowered on a bar. Some models are wall-mounted instead of ceiling-mounted. Such designer plumbing can enrich and even embellish the interior of any room.

Therefore, today it is quite often seen in the rooms of expensive hotels and spa salons, as well as in elite fitness clubs. To use such systems in an apartment or house, it is desirable to have a spacious bathroom.

Unlike an ordinary shower, which often disturbs harmony with its unaesthetic appearance, ceiling models of the tropics often provide for their integration into a suspended ceiling. This is not bad from a visual point of view, so they fit perfectly into the interior of the bathroom. Manufacturers produce models with nozzles of different shapes, with their help it is possible to add a zest to the interior, if, for example, you install a rain shower that matches your style in the bathroom. The design, a photo of which can be viewed on our website, clearly proves this.

So, for an interior in a classic style, a round or oval watering can is better suited, and modern or high-tech styles will complement and decorate a rain shower with LED backlighting. By the way, the backlight can be chosen as a contrasting color to the main finish, or in harmony with the texture and color of the walls. Designer decoration from light overflows will be more vivid and memorable.

Tropics shower system manufacturers

The leading positions among the manufacturers of rain shower panels are occupied by the companies Novellini, Bossini, Hansgrohe, which have many years of experience and have long earned a good reputation in the sanitary ware market. The goods produced by these companies are, as a rule, in different price categories, but always of high quality.

Plumbing, which is classified as luxury, is quite expensive. In addition, when installing it, it is often necessary to lay additional water pipes that will supply water that provides the effect of a rainstorm, which further increases its cost. But at the same time, the models belonging to the elite class have many advantages: a large nozzle that sprays water, several shades of illumination that can be switched, and a number of additional rather pleasant options, for example, several irrigation options, remote control.

Today, some of the less well-known manufacturers often offer relatively inexpensive shower systems that they advertise as tropical. In fact, these are the most ordinary spray nozzles of a slightly increased size, and the water from them is supplied with a simple stream, without mixing with air, so they cannot create the rain effect.

The benefits and healing effects of a rain shower

Some water treatment products are used to prevent nervous system disorders. For example, Otler's rain shower; user reviews about it on the pages of various sites once again confirm such qualities of this product .

With the systematic reception of such procedures, a healing effect is noticeable, which is achieved due to the fact that water procedures are combined with light therapy and a massage effect. Their regular intake strengthens the body. Trickles of warm water, massaging the body, give the skin elasticity.

Scientists have long proven that light affects our body in the same way as smells or taste. Illumination, depending on color and wavelength, can affect a person in different ways.

For example, shades of green help to relax and tune in to relaxation, yellow color cheers up, and you can cheer up and mobilize the body's internal reserves with the help of bright red. Thanks to the multi-colored illumination, a person receives aesthetic pleasure.

In conclusion, I would like to advise: if the limited size of your bathroom does not allow you to allocate a separate place for installing a rain shower, then it is quite possible to combine a shower rack and a bathtub. True, in the future it is advisable to purchase a plastic curtain or a special curtain to protect the room from water drops.

zonavannoi.ru

Why do people like rain shower so much

According to experts, taking a shower is much healthier than taking a bath. The pure stream of water falling on the human body creates a sudden effect, from which skin cells experience slight stress and become more active. And if this flow of water is also accompanied by some effect, then it brings many more benefits than usual.

Shower-rain was invented by lovers to soak up under the gentle streams of warm summer rain. The shower-rain supplemented with special effects has a beneficial effect on the human body.

There are many types of rain showers. Each of them is good in its own way, and the essence of the adaptations does not change. The mystery lies in the fact that the stream of water is saturated with oxygen before it hits the human body. Special effects in the form of music and lighting contribute to the relaxation of the whole body.

Positive aspects of a rain shower:

Taking a shower under a stream of water from a tropical shower is much more pleasant than from a regular shower;
Additionally, the human body receives a hydromassage;
Has a tonic effect;
Promotes relaxation;
Saturates the skin with oxygen;
Helps the body produce endorphins.

Tropical rain helps to relieve the fatigue of a hard day and recharge with new, refined energy.

Shower head "tropical rain": device types

Everyone can take a shower under a tropical downpour. For this, a special watering can is installed in the shower room or above the bathtub. There are many different rain shower options available, and each design works differently.

The "tropical rain" shower head is made on the principle of an aerator. It contains several layers of fine mesh that enrich the water with oxygen.

When buying, try to choose built-in shower heads made of steel or brass. They are the most durable and environmentally friendly. Good reviews are given by Otler.

Types of rain showers:

Stationary divider inside the shower stall on the ceiling;
On a stationary stand in the shower cabin;
On a removable stand in the shower stall;
Mounted above the bathroom
Outdoor rain shower for a country house or summer cottage.

If you don't want an outdoor rain shower to shower on you every day, you can install a removable design option. For convenience, they began to produce such models where two versions of watering cans are provided at once.

Shower mixer "tropical rain": design features

Any water supply to the plumbing device is carried out using taps and pipes. The mixing of cold and hot streams takes place in a mixer, where water from two sources enters, and mixes there.

The tropical rain shower faucet delivers water at your preset temperature to the divider, which in turn erupts a stream of water onto the human body. Basically, faucets with a thermostat are used for a tropical shower, which maintains the temperature of the water.

Those who are forced to save money quite reasonably use ordinary mixers for a tropical shower, they only replace the watering can in them with a special divider.

What is the difference between a rain shower and a regular shower:

The watering can of a tropical shower is several times wider than the watering can of an ordinary shower;
The stream of water pours not on a specific part of the human body, but covers the entire body at the same time;
The rain shower faucet has a switch that adjusts the flow of water and the way it is dispensed;
The watering can of a tropical shower is equipped so that passing through it, the water is enriched with oxygen.

A rain shower is much healthier than a regular shower. If you equip it correctly, then every time you take such a shower, you will get real pleasure from the procedure.

Is it possible to make a do-it-yourself rain shower for the bathroom

A good, competent, high-quality rain shower purchased from a store is certainly good, but very expensive. To assemble the entire structure completely, to provide it with both light and sound effects, you need to spend a lot of money. Not everyone can afford it. But if you already have a bathroom, then you can equip a rain shower based on it.

Do-it-yourself rain shower for the bathroom is what will come to the rescue in this situation. Gradually collecting all the elements of the structure, or adapting the old ones, you get the opportunity to have a rain shower in your home for almost free.

If you have a walk-in shower or bathtub with mixer, all you need to do is purchase a rain shower head.

Items required to equip a rain shower at home:

Mixer with flexible hose;
Water pipes;
Rain shower head;
Shower or bath;
The presence of water in the system.

If you have even a small idea of plumbing work, then it will not be difficult for you to equip such a shower. If you do not have relevant experience or knowledge, contact a specialist. In any case, if you have the necessary materials, installing a shower will cost you much less.

It is best to design the installation of a complete, full-fledged tropical shower even during the construction, or overhaul of the house. Embedding the system into the walls of the bathroom will damage the finish of the bathroom and you will still need to make repairs.

A do-it-yourself rain shower can be done quickly and efficiently. Of all the plumbing fixtures, the easiest way to do it is a tropical downpour.

The entire manufacturing process is carried out in eight stages.

Stages of making a rain shower with your own hands:

Prepare all the necessary parts and inventory;
Carefully make measurements, determine the most convenient place for the mixer and shower head;
Next, you need to arrange a system of strobes - recesses in the wall for piping;
We lay water pipes;
We connect and assemble the mixer;
We make wall decoration;
We install the watering can in the chosen place;
We check the tightness of the structure.

Your rain shower may be different from those with a full multi-option rain shower system, but it turns out to be functional and cost effective.

Diy tropical rain system: how to lengthen the shower rack

The first problem faced by those who want to make a tropical, standing shower out of an existing ordinary shower is the length of the watering can stand. The stream of water pouring from a rain shower head must fall on the human body from a certain height.

How do I extend the shower bar when remodeling my shower room? There are several ways to address this issue. The main thing is that the height in the room allows you to do this.

If you don't have enough rack height for your rain shower equipment, this does not mean that you should abandon the idea. You just need to choose one of the ways to lengthen the rack.

How to lengthen the shower rack:

Move the water inlet to the desired height;
Find suitable tubes and lengthen the rod by welding;
Equip a shower built into the ceiling.

To prevent this from happening, carefully calculate the distance in your shower before repairing it.

Ceiling mounted rain shower with lighting by professionals

For a greater relaxation effect while taking a shower, they came up with a watering can backlight. It is believed that exposure to light is good for a person's well-being.

The illuminated rain shower is a modern, even the latest version of existing showers.

The effect of illumination on the human body is based on chromotherapy - the healing effect of light on the human body. This method was invented not so long ago, but it has already gained great popularity.

How colors affect the human body:

Green color adjusts to positive emotions, promotes concentration of attention;
Yellow color activates the immune system;
The blue color adjusts to a judicious mood;
Pink helps to relax and awakens sensuality;
Orange helps to quickly relieve stress.

Red is considered two-fold. It can both aggravate negative energy and give vigor.

Rain shower in the bathroom (video)

A rain shower has a beneficial effect on the human body as a whole. Showers equipped with such a shower have an excellent design. By installing a summer shower system in your shower or bath, you bring yourself closer to nature. Modern technologies make it possible to give the device multifunctionality that comprehensively takes care of your health. A built-in shower has more features and functions than a wall-mounted shower. But a built-in shower is more expensive.

kitchenremont.ru

Rain shower: not a luxury, but a unique hydromassage fixture

Have you ever wondered why children and sometimes adults love to run in the rain so much, especially when it comes to warm summer weather? The answer to this question is simple - water purified from all kinds of pollution gives a person a lot of energy, and drops of water falling on the body relax all his muscles. It is this effect that is incorporated into the operation of a device called "tropical rain" shower - this is its complete imitation.

If we are talking about such a device, then in most cases it means a huge watering can installed on the ceiling. The jets emanating from it fall not only on a certain area of the body, but also fully pour over it over the entire surface. You yourself understand that it is unlikely that it will be possible to achieve such an effect with a portable watering can with a hose. In addition, such devices are equipped with a special switch that allows you to adjust the intensity of the "rain" - by setting the lever in one position or another, you can adjust both a torrential downpour and rain in the form of large drops of water.

Rain shower with lighting photo

Shower systems with rain shower: four varieties and their differences

Oddly enough, but a rain shower can have different manufacturing options - some of them are adapted specifically for showers, and others for baths. Even systems designed for the same plumbing fixture may differ in their design. On average, the following types of rain shower systems can be distinguished.

Shower panel with rain shower. This solution is equally suitable for both shower cabins and bathtubs, even though their intended purpose is shower cabins. Such a panel is quite easy to install in the corner of the bathtub and serves as an excellent addition and way of expanding the functionality of a conventional bathtub. The advantage of this shower accessory is that you get both the mixer and the shower head in a single body. In addition, in most cases, these shower panels are additionally equipped with hydromassage nozzles. The disadvantages include only the cost - this is the most expensive rain shower that can be found on sale.
Shower racks with rain shower. Perhaps this version of the execution of a rain shower can be called the most optimal solution - it is also universal and is suitable for both shower cabins and baths. Basically, a shower column is a wall-mounted bar on which a tropical rain shower head is attached. By and large, this device is not much different from an ordinary watering can with a hose - except for the size of the watering can itself. Such a rack can be found in two versions - in one case, water is supplied to the watering can through a flexible hose, which is familiar to everyone, and in the other case, through a stationary pipe that harmoniously fits into the design of the rack.
Faucet with rain shower. This device differs from an ordinary bath mixer only with a complete watering can, the diameter of which can be up to 250 mm. It is difficult to call this device a full-fledged rain shower, since the width of the water flow is still smaller than it should be, and it is not able to completely cover the human body with water. Such a mixer can also have several versions - with a flexible hose installed on the wall by means of a small fixture, as well as with a stationary pipe. In the latter case, the size of the watering can itself can be much larger.
Shower head rain shower. This attachment transforms a conventional bathtub and shower mixer into a kind of rain shower. It can be called the cheapest option - you get a separate watering can and install it on the hose of the old mixer. This option is as far from a real rain shower as the previous one.

Shower tropical rain photo

Studying all these systems and comparing their capabilities and pricing policy, you can only come to one conclusion - if you want to have a real and high-quality tropical rain shower at home, then make it yourself!

DIY rain shower: DIY technology

Among all the plumbing products, it is difficult to find one that can be made easier than a tropical rain shower. Everything here is quite simple and straightforward, and the main thing is that its manufacture does not require a large number of all kinds of units and mechanisms. Basically, you only need three things - a mixer, a large watering can and water pipes. This system is best combined with a concealed shower mixer, which will control the flow of water not only to the shower, but also to the bath itself. Naturally, due to some of the features of this shower, it is better to give preference to a concealed mixer.

How to make piping for a rain shower system, see the video.

So, the assembly and installation of a homemade tropical rain shower begins at the stage of wall repair - for it you will need to arrange a strobe system. The center of this system is a recess in the wall for fitting a mixer. Four strobes need to be drawn to this recess - two of them are for the pipes supplying water to the mixer, the third is for the pipe supplying water from the mixer to the bath, and the fourth is equipped with a pipe that will provide water directly to the shower head itself.

DIY rain shower photo

Having dealt with the strobes, we turn to the laying of water pipes - it all depends on the type of pipeline you have chosen. Naturally, taking into account the hidden method of laying pipes, it is better to give preference to such reliable systems as copper or polypropylene. From the mixer, the pipe supplying water to the shower is laid up to the ceiling itself, then a little along the ceiling, to the place where the watering can will be installed, and then a little down to lower to the level with the future false ceiling. Without the latter, it will not be possible to hide the pipes.

In principle, at this stage of work, this is all - then the renovation of the bathroom continues in full. To complete the work related to solving the issue of how to make a rain shower with your own hands, all that remains is to install a watering can and a mixer control lever. Everything is extremely simple here - the watering can is screwed into the outlet of the water pipe in the ceiling using tow or FUM tape. After installing the watering can, the rain shower can be fully used.

How to make a rain shower

In conclusion, I will add only one thing - a home-made rain shower in the way described above can be installed not only in the shower stall, but also above the bathroom. The only thing that will need to be foreseen is curtains that will prevent splashing water while taking water procedures.

vizada.ru

The principle of action and types of watering cans "tropical rain"

A distinctive feature of the Tropical Rain shower is that water is supplied through a special system that distributes the flow over the entire area of the grate, the dimensions of which can be very significant. The shape and design of watering cans can be very different. There are models with a water pressure control system, which, depending on the settings, can have both a relaxing and invigorating effect.

Popular watering cans with LED lighting, the color of which changes depending on the temperature of the stream. Such systems enhance the therapeutic effect, since any shade of color has its effect on the human psyche. A simple control system of settings allows you to get the desired result.

The model range of watering cans is constantly updated. One of the novelties is a shower complex equipped with a system for supplying fragrances with the scent of tropical plants.

Some models have the option to randomly select the head. Therefore, being in the shower gives the feeling of unpredictability inherent in real rains.

Shape, material and dimensions of watering cans

Shower heads "Tropical rain" can be round, oval, square, rectangular. For small shower rooms, both large and miniature are suitable. The choice depends on what effect you want to get from water procedures. When using large watering cans, the sensation of a tropical rainstorm is more realistic.

Watering cans "Tropical rain" can be steel, chrome-plated, brass, nickel-plated. When choosing a model, you need to understand that the main thing in a shower system is a mixer and accessories for water supply. The Tropical Rain shower can be installed on any system.

Premium segment models have the maximum number of options. These include aeration technology (air supply), remote control, multi-colored illumination, protection against mineral deposits, a system of adjustable and multidirectional water flow. These shower complexes are the most expensive.

The aeration system allows you to break streams of water into drops, which is especially appreciated in the Tropical Rain watering cans. The principle of its (system) operation is based on the use of a hydraulic turbine on point bearings. In its center there is a hole through which air is drawn in. The turbine blades, while rotating, mix water and air, as a result of which droplets are formed. Adjusting the rotation mode allows you to get large and small droplets.

Watering cans "Tropical rain" can be installed in both built-in and hinged shower systems. The mounting method can be wall or ceiling. Models of the second type are called "overhead shower".

Rules for choosing and purchasing a watering can "Tropical rain"

The first thing to pay attention to when choosing a Tropical Rain watering can is its size (for round models - diameter).

If the package includes a glass or plastic shade, you need to inspect it for chips and cracks. All models of shades have a recess in the central part, into which a watering can should be installed. Therefore, the diameters of the recess in the plafond and the watering can must match.

It is necessary to check the availability of components. All Tropical Rain watering cans come with a special sleeve that is screwed to the inlet located on the back of the watering can. This sleeve is the transition between the shower roof and the shower head. The sleeve is attracted to the shower system (its counterpart with a hose) by means of a nut. It also comes with any model.

If the model has a backlight, in addition to connecting to the water supply system, they are connected to the mains through a transformer unit.

Installation of a watering can "Tropical rain"

Watering can "Tropical rain" can be installed:

on a hinged shower rack;
on the panel in the shower cabin;
on a flexible hose that is connected to the mixer (hand shower);
on the built-in shower system (fixed mount).

Depending on the selected model, there are two methods of installation of the "Tropical rain" systems.

Overhead or overhead shower (built-in systems).
Wall-mounted shower (column shower, shower panel, mixer connection).

Installation of the Tropical Rain watering can is easy. The main task is to install the shower system. Built-in models require wall and ceiling piping. Mounted models do not require such time-consuming and expensive work and can have an adjustable boom height.

Depending on the selected model of the shower system, the "Tropical Rain" hand cans can be fixed permanently or on a removable hose. Experts recommend using both methods, as this allows you to use the shower system as efficiently as possible.

All models of this type of watering cans are equipped with movable arms that allow the perforated metal disc to be tilted in any direction. Below the bracket, in the depth of the watering can, there is a coarse water filter. The complete set of any models includes an adapter tube and bushing, a decorative ring.

Installation of the Tropical Rain watering can is simple and straightforward. Any owner can cope with this task.

Stages of installing the Tropical Rain shower head

Step 1. The sleeve supplied with the shower head is screwed into the outlet of the shower system (on the ceiling or in the wall). First, a decorative ring is put on the sleeve, which will hide the attachment point and make it aesthetically pleasing.

Step 2. The adapter tube (bracket) is screwed to the installed sleeve.

Step 3. The Tropical Rain shower head is attached to the bracket by screwing in.

If the shower head is installed on a flexible hose from the mixer, it has a small size and a special threaded protrusion. Installation is carried out by screwing one to the other: a watering can and a flexible hose.

Video - Overview and assembly of the HANSGROHE Raindance overhead shower

vanna-expert.ru

Types of shower systems

Panel

Rack

Faucet with rain shower

Watering can

Peculiarities

Benefit

Manufacturers

Note that a quality rain shower is considered an expensive plumbing fixture. If you saw an inexpensive option from a little-known company, then you risk buying only a semblance of a tropical shower. You will be sold a regular shower head with a larger size, which supplies water in the usual way (in the form of jets without mixing with air), and therefore the rain effect will not work.

In the bathroom interior

Backlight

By choosing the color and lighting settings, you can harmoniously blend the rain shower into your bathroom. A change in color can be combined with a change in water temperature. In this case, turning on cool water (less than +31), the glow will be blue, with warm water (+ 32 + 38), the diodes will glow pink, and hot water (more than +39) will give a red color.

Note that the presence of backlighting is not just a decor, but can serve as a means of chromotherapy. Taking a shower with red lighting, you will increase your tone, become more vigorous and energetic. Water treatments in green light will relax and help you streamline your thoughts. Standing under the blue backlit shower, you will feel peace and forget about acute problems. Taking a shower that glows yellow can boost your immunity and boost your brain function. A rain shower with pink and orange lighting can help combat stress and promote health.

The more progress and comfortable living conditions swallow us, the further we are from nature and natural habitat. This is not surprising. There are two big differences between living in a cave and living in a furnished apartment. Sleeping on a soft bed is naturally better than on the ground. But somewhere within us lives that person who did not yet know all the benefits of civilization, and rejoiced in the sun, rain, soft grass. Perhaps that is why, in the spring we are drawn to a picnic, and in the summer we want to plunge into the cool sea. Another way to connect with nature is with a rain shower.