Have you ever thought about how to make your own hand? In fact, it is easy. The main thing is to choose the necessary materials and tools, and then act on the instructions. Puffy is a very comfortable thing in the interior. He does not take up much space. You can choose a lot of design options depending on the stylistics of the room. In addition, it is mastered by his own person - a pleasant matter that allows you to embody the most interesting ideas.

How to make frame pouf

Frame pouf is very easy to do. Such a subject of the interior will decorate the room and will perform the function of the chair (and very comfortable and soft). In addition, it can also be kept any small items.

It is necessary to prepare in advance lineup, glue (carpentry type), pencil, stapler (construction), hacksaw, self-tapping screws for wood, screwdriver and hammer. Materials will need a special fabric that we are wearing a frame. It is necessary to choose the one that is intended just for decorative upholstered upholstered furniture. Also, another 1 lap with dimensions of 15 * 4 * 4 cm, a pair of piano loops, 4 rollers for furniture, chipboard with dimensions of 175 * 240 * 0.16 cm. All this is taken at the rate of standard emblem with dimensions of about 40 * 40 * 50 cm.

Before proceeding to work, it is necessary to study the phased instructions. It is as follows:

1. First you need to make marking on the material, and then the workpiece. To make the wall structures, you will need 2 cuts with sizes of 37 * 40 cm. To arrange the side parts, 2 blanks are needed, which have 37 * 37 cm sizes. In addition, it is necessary to cut another 1 square with a length and width of 40 cm.
2. Now you can proceed to drinking these parts. To do this, you can use the hacksaw.
3. The bar relies divided into 4 parts so that each is 37 cm.
4. Now relies from the cut parts to collect box. The height should be 37 cm.
5. The design made by joinery glue. It should be applied from the inner side of the product. Thanks to this, the item will be more rigid.
6. Now it is necessary to fasten the corners as yet and self-drawing - it needs to be done with the outside of the corners. If there is a desire, the design can also be strengthened with metal corners that should be purchased before it in any construction store.
7. Now on the lower side of the box, it is assumed to apply adhesive substance. The same applies to the end side of Bruusyev.
8. Printed bottom and wait until the collected frame will dry.
9. Additionally, insert the screws to strengthen the product.
10. Now you can start making the lid. It is necessary to fix 4 bar of the stopper in the inner surface of the perimeter of the box.
11. It is necessary to check that the ribs of hardness are correctly fixed. They should not interfere with the rise of the puff cover.
12. Now it remains to make upholstery. How to shepherd Puffy - chooses each each independently depending on its own preferences and interior of the room. It is recommended to use Vatin, Singyprä, Foam, Hollofiber. From above, you can cover additionally upholstery.

Now the pencil is completely ready. And this is not just a beautiful item - it can replace the chair and a small bedside table for small things.

Bottles and coils

At home, you can make an empty from the most unusual items. For example, you can use plastic bottles. There are already many crafts from this available material. The pouf from it will not only be different with its decorative properties, but also become very practical.

It is necessary to prepare 40 bottles of plastic in advance. And the lids do not throw away from them. In addition, the scotch is needed - choose only a wide ribbon. To fill, you need a syntheps or foam rubber - the material will use for lining. Additionally, you need scissors, knitting threads, stapler, hook or knitting needles that are used for knitting. And of course, you need to choose a decorative fabric for upholstery.

The father's hand is stepdown as follows:

1. First make a design from bottles. All containers must be tightly closed with covers. To connect the details to use tape. It is necessary to make several layers of plastic bottles. All bottles can be fixed at once, but experts advise them to fix them only several pieces per 1 time - this will increase the strength of the structure. When the sections are obtained, they are also supposed to be fixed with each other.
2. Now it will be necessary to do a pattern of cardboard. To do this, the workpiece you just need to apply to a circle, the diameter of which is about 40 cm. Then pencil draw lines. After that cut 2 circles. Both billets must be applied from two sides of the improvised pouf and fasten with scotch.
3. Further relying to do lining. It is necessary to cut 2 circles of this diameter as previous billets. In addition, you need to cut more and a rectangle that is supposed to wrap the design on the sides. Using a stapler, a foam rubber should be fixed or other material that is used for linings, on the design. The lining still need to additionally sew among themselves along the connections lines.
4. It is necessary to make a case. For this, any dense fabric is used. You can choose a special material that is used for upholstery of upholstered furniture, but if there is no such possibility, then any other is suitable - the main thing is that it is dense enough.
5. In the end, the side and upper pieces of the pouf can sew to the bottom.

Now the pouf from ordinary plastic bottles is ready. By the way, it can be made with a back. In this case, it is still necessary to make a workpiece of such a form that should be in a puff. The back of the product must also be sown with foam rubber and decorative fabric.

Round Puffy do it yourself make it from the coil. If the interior of the room is made in a rustic or classic style, then you can decorate it with a pouff, which is made from the coil. As a result, it turns out a solid and reliable product that can be decorated at your own request. Pouff will be original and interesting.

It is necessary to find a wooden coil. It can not be done from wood, but from the chipboard - this option is also suitable. Read more cardboard, upholstery material, batting or foam rubber, foam and adhesive weight. From the tools you need to prepare a pre-drill, stapler and sewing machine.

Instructions for creating a pouf looks like this:

1. Foam cut out parts with a planned form. They should be the same as the tops of the coil. With the help of glue, fix the parts.
2. Now you need to make a template to work with a soft layer and decorative fabric. To do this, it is assumed on paper or film to cut a circle with the size of the same as the top of the coil, but you still need to make a small allowance to sew these parts.
3. Wooden circles should be smeared with glue and fasten circles on them that are cut out of the foam rubber.
4. It is necessary to wrap the entire design with cardboard and fix it with glue and stapler.
5. After that, you need to wrap the pouf in batting and also secure the stapler. It is always necessary to measure everything, and then remove everything too much.
6. It remains to perform only the upholstery. The material must be stretched, but not too much.

In the end, it remains only to attach the legs to the design.

How to make marry puffs

From the fabric you can make a multicolored pouf. It turns out the original product. It will take various pieces of fabrics for him, but they all must be combined with each other by shades. In addition, you need fillers and lining material. You still need large buttons.

The algorithm of action is simple enough:

1. First think out the pattern. It is necessary to draw a circle that the diameter will be the same as the planned product. Further divided circle into 4 parts, and then the resulting item obtained is another 3. Now it is supposed to cut pieces from the fabric in the form of petals. Be sure to leave another pair of centimeters to connect the joints. The same relies with the material for lining.
2. All parts to connect.
3. Now make the bottom of the product. It is best to use a dense cloth. With an inside, the top and bottom of the puff need to be sewn. At the same time not to sew at the end of 1 part in the form of petal.
4. Now you need to turn the material and use the filler.
5. In the end, it remains only to sew the remaining places and disguise the seams with large buttons, attaching them from top and bottom of the structure.

You can still make an interesting and simple pouf from an ordinary sweater. Such an object will fit into any interior, and with its creation will cope with it. It is necessary to find a suitable sweater - you can even take a worn, but it is recommended to choose the product from wool.

Another interesting option is a pouf that looks like a ball. It requires only polyethylene, fillers, millimeter paper (to make a pattern) and various tissues of two shades. Such an empty is very simple, but at the same time comfortable and accurately fit into any room.

Conclusion

Among all the above options, everyone can find the one that is most suitable for him. All described instructions are very simple, so even a beginner will be able to cope with such a task and make pouf with your own hands. This subject of the interior is very convenient and practical. In addition, he will also decorate the room.

A soft and comfortable aspic can become not just an interesting object of furnishing, but also a practical thing that occupies a bit of place. Depending on the style of the design of such a product, it can fit perfectly into any room design. In addition, to make and make interior with their own hands - this is a pleasant activity that will make the original ideas for decorating at home into reality.

This homemade item is distinguished by multifunction. The emblem can become an element of the decor, perform the function of the chair and be just a convenient place to store small things. And if the frameless option was chosen for its manufacture - it will be successfully suitable as a toy. Options How to make a ottoman independently there are several. Consider some of them in more detail.

Tools and materials

This example of work is performed on standard puff sizes - 400x400x500 mm. To construct the product as follows:

• piano loops - 2 pcs;
• bar 150x40x40 mm - 1 pc;
• Chipboard with dimensions 1750x2400x16 mm;
• material for upholstery, 50 mm thick - batting, holofiber, foam rubber or syntheps;
• furniture rollers - 4 pcs;
• dense tissue for decorative upholstery.

For the manufacture of a pouf requires such tools:

• carpentry glue;
• line;
• self-tapping screw;
• screwdriver;
• pencil;
• construction stapler;
• hacksaw with small teeth;
• a hammer.

Puffy do it yourself:step by step guide

1. Initially, it is necessary to make marking on the working surface. Make such blanks:

• 2 rectangular segments 370х400 mm - for puff walls;
• 2 rectangular blanks 370х370 mm - for lateral parts;
• 1 square fragment 400x400 mm.

1. Then proceed to drinking fragments using the hacksaw for this.
2. Collect the available bar on 4 parts so that each length is 370 mm.

1. Collect a box of all carved fragments. There should be a frame with a height of 370 mm.
2. Secure the joinery glue bars along the inner corners of the design. This will make it hardness to give it.
3. Fix the corners of the frame by self-drawing from the outside. Optionally, you can strengthen the design with metal corners.
4. Then apply glue to the lower part of the box, as well as on the ends of the bars.
5. Glue the bottom and give the frame to dry.
6. Then strengthen the design with self-drawers, screwing them through the end of the box.
7. Start making the lid. Screw the 4 bar on the inner sides of the perimeter.
8. Make sure that the ribs are installed correctly and do not interfere with the lid closed.

12. Then proceed to the upholstery of the PUPPIC. In this process, rely on your fantasy. Throwing, batting, holofiber or syntheton are optimally suitable as upholstery materials.

13. The product is ready! This dash in the interior of the dwelling will become not only a decorative element, but also a functional bed for storing things.

Plastic Bottle Puff

Opportunities are suitable as a material for home Purifies. For example, plastic bottles. This is the most affordable way to build a home pouf, which is characterized by high decorativeness and practicality in use.

Materials for work

For the workflow, you will need materials:

• bottles with covers - 40 pieces;
• scissors;
• foam or sintepon for lining;
• scotch wide;
• needles and threads;
• knitting needles or hook;
• yarn;
• stapler;
• decorative type fabric.

Manufacturing process

1. To build a pack of bottles, you need to take plastic containers (the covers should be tightly twisted) and using the tape to connect them with several layers.
2. Bottles can be copped immediately everything, however, for greater strength, the product is better to fix them with packs of several pieces. And after the sections received as a result, it once again served with each other.

3. At the next step, you need to make the pattern of the bottom from the cardboard. To do this, attach the workpiece with a circle of 400 mm to the cardboard and circle a pencil.

4. Based on the resulting pattern, you need to cut two blanks.

5. Then put them on both sides of the POPIFI and secure it through Scotch.

7. With the help of a construction stapler, the foam rubber cardboard frame.

8. Porophone linings are placed on the product and stitch.

9. Start the sewing of the cover. Luba is suitable for this.

10. At the final stage, it remains to tie up the upper and side parts of the PUPPI, which in the end must be sewed to the bottom.

11. Puffy is fully ready.

Making PUPPU from the coil

Diversify home furnishings. Detail of a classic or rustic style. You can manufacture a sofa to use the coil. This option will allow you to make a solid product that can be decorated to your taste. Thanks to which the pouf will become an original addition to any interior room.

Materials and tools

Before starting work, you need to prepare the following:

• tree coil or chipboard;
• styrofoam;
• glue;
• foam or batting;
• the cloth;
• cardboard;
• construction stapler;
• drill;
• sewing machine.

Step-by-step manufacturing process

1. At the initial stage, it is necessary to cut the parts from the foam, corresponding to the size of the upper part of the coil.
2. With the help of glue, make each other.
3. Next to work with a cloth, Vatin and Porophaton make a pattern. To do this, draw a circle on paper, leaving "points" for seams.

1. We proceed with a wooden circle with glue and the pre-carved circle of the foam rubber.

1. After that, turning the design of the cardboard, fixing it with a stapler and adhesive composition.

1. Then wrap the pouf with Vatin and secure from below the stapler. Make all the necessary measurements, remove the extra pieces and proceed to the upholstery of the cloth.

1. After that, we sew a fabric cover and put on the otfik. Note that the decorative upholstery should be stretched, but not too much.
2. In conclusion, drill holes and attach the legs on the plates.
3. The work is over.

Multicolored Fabric Puff

Fill the interior with colorful shades will help the pencil, combining various colors. Such a subject of considerable will bring bright accents into the overall design and make it more original.

Materials for work

To create such an original detail of the interior, we will need to prepare the following:

• pieces of fabric diverse, but combined with flowers;
• lining fabric;
• material for filler;
• needle, threads;
• machine sewing machine;
• buttons of sufficient large size.

Getting to manufacture

1. The first step is to create a pattern. To make it should draw a circle with the diameter of the future product. The resulting circle must be divided into parts. At first, on 4, then each another 3 fragment.
2. Using details data, cut out pieces of fabric in the form of petals, leaving two centimeters to step.
3. This manipulation is performed with a lining cloth.
4. The obtained items must be sewn over the sides.
5. Start the construction of the lower part of the future product. It is advisable to use dense tissue for this.
6. From the wrong side, sew the bottom of the tissue puff with the top. At the same time, it is necessary to leave an unimpressed one "petal".
7. Then you should turn the fabric and fill the prepared material.
8. Sew the product completely.
9. Missing the seams with large buttons, sewing them in the center of the Purifer from above and below.

Bowl

Bedroom Puffy diversion and complement any atmosphere. In addition, for the manufacture of this furniture, the simplest and affordable materials will be required.

Preparation for work

For the manufacture of such a way, you need to prepare the following:

• polyethylene;
• threads with a needle;
• sewing machine;
• fabric of two colors;
• material for fiber filling;
• graph paper.

Stages of execution

1. Using millimeter paper needs to make a pattern. For this, any round item is suitable, such as a large ball.
2. We measure the circumference of the ball and the obtained data is divided by 2.
3. Then you need to divide the resulting number in 5 in such a way that 2 extreme fragments and 3 parts in the middle were the same size.
4. At the outlet, we get the diameter of the circle and the width of the strips.
5. Then the line should be conducted below on the basis of the resulting width of the parts.
6. Cut from polyethylene bottom. We assign it to the first strip and secure the edge with the help of Scotch.
7. Similarly, we get the part for the middle strip. We translate the obtained parts on paper.
8. We make the pattern of the future product from the fabric of different colors, while leaving 1 cm on the seam.
9. We sew part parts by forming uniform strips.
10. In the next step, the successively stripes with round parts should be fixed.
11. We leave the second strip end end and fill the product prepared for this purpose.
12. We sew the remaining opening of an imperceptible seam.
13. Puffy is fully ready for use.

Make a Puffy Sweater

A fairly unusual solution in the interior will be a pouf made from a sweater. This furnishing element will fit into any dwelling design, especially for decorating the children's room. Consider a detailed master class of Purphin with your own hands.

Materials and tools

To perform this work, you need to prepare the following:

• old woolen sweater;
• tissue for sewing case;
• felt;
• polystyrene foam;
• threads;
• scissors;
• needle.

Step-by-step instruction

1. We take felt and cut out the circumference of the diameter you need from it. It will be the bottom of our Purphic.
2. Then prepare a sweater to work: wrap the inner side of the sleeve and squeeze holes.
3. Next to the bottom of the sweater you need to sew a circle from felt.
4. In the next step, it is necessary to cut a 50x70 cm with a rectangle fabric.
5. We sew a cover from it, while making the bending from above. It will serve for us for a lace, which we tighten the neck of the case.
6. The resulting case should be placed in the sweater and fill the polystyrene.
7. The last step will be tightening and lace zayage.
8. Puff is ready to use.

Conclusion

From the above methods of making aspirations you will surely find the most appropriately you. Such comfortable interior attributes carry not only practical, but also decorative functions. Puffy with the back or frameless will make your everyday life and decorate the home furnishings. In addition, the manufacture of independent elements of the interior is quite a suitable sphere for creative implementation.

A video lesson on how to make pouf with your own hands is presented below:

How to make the father-in-law do it yourself, without throwing money to the wind? Of course, it is possible to buy it in a furniture store, but looking at the cost of a simple product from the chipboard, a desire to make crafts at home. If we consider furniture headsets in general, then their large part refers to rather complex designs.

To do something from this list with your own hands by experienced craftsmen, and only the otfik is done without special skills and knowledge from the remedies. The practical thing will turn out when the upholstery fabric is chosen durable and high-quality, which can be wiped, cleaned, washed.

Such materials include leather or furniture fabric sold in specialized stores. It remains only to browse the phased instructions for the manufacture of emptying of various shapes.

So:

• Puffy for the seating of several people in height comparable to the chair and more resembles a soft bench. For home, such a model is inconvenient, and not needed, but in the zones of fitting and expectations is very relevant.
• Puffy in addition to something with a certain height. From the very definition it becomes clear that it does not perform an independent product, but serves as an application. Models, barely towering above the floor, are not intended for the seats on them, but are used as stands for adults. Children love such things in miniature and with pleasure use them in their games.
• Complement chair, sofas, beds, rushing under the table Or being a component in a non-standard combination (beach cabin with puff), the otfiki firmly occupy a niche in furniture salons. You can say more, a fashion appeared on the author's items that make the interior fashionable, complementing it.
• The video in this article represents puffs with advanced features. Looking through it, remember the plot of the film, when the pants turn into shorts in a slight movement of the hand, "and here the ottoman is transformed into a full-fledged chair with a table, a bed with a lamp stand and in other necessary items, while taking a minimum of space.

Before taking on to make the manufacture of Purifies with your own hands, it is necessary to have an idea about it, it would seem that a simple furniture family.

So, the puffs are classified by materials, structures, functions and forms:

1. Textiles, leather are used on soft products.. It's nice to throw my legs on your own hands, and when it makes it possible to fall apart on it.
2. The rigid structures of the emblems make from Rattan, wood, often covered with varnish, cortex of cork trees. Hard deputies, with their own hands made, are not suitable for long-term seating, but brought into the interior the stress, intrigue.

ATTENTION: The emblems definitely refers to the desired thing, and its need is felt at the entrance to the house, more precisely, in the hallway.

1. How to make, sew, associate and which design of the PUPPIC to choose, - the task is not from the lungs. Puffy can be with naked frames from steel tubes or wood.
2. Pupph may have a closed frameAnd the legs are hidden under the frills of the decorative skirt. Such products are popular with the British and Americans.
3. Fund on barely noticeable legsWhen the chair is copied without armrests and backs.
4. Puffy with your own hands - Not only a comfortable chair for members of the whole family, regardless of body weight, but also a wonderful support with a sore back.
5. What could be easier inflatableconsisting of a textile cover on a zipper and an inflatable chamber inside it? The deputies differ not only by materials, designs, but also forms.
6. Square Puff Your Hands, Round, Triangular, Combined From different geometric shapes, you can make from the remedies.

Screw agents in the house

How to make the ottoman yourself, if there are no skills and desire to drink, cut, spin? Clemators offer a lot of ideas and proposals embodied. Work on the manufacture of pretty PUPPIC is not complicated, but quite fascinating, but the thing made with their own hands radiates a special warmth and has a meal of home comfort.

Soft baffies

The simplest scheme, how to make a soft father-in-law with your own hands, is as follows:

• Two circles with a diameter of the upper and lower parts of the product are cut from the tissue.

Tip: Cutting details, you should not forget to leave on the seams of the allowance.

• Two rectangular details of the same size are cut:

1. width in the height of the puff;
2. the length equal to half the length of the vertex and roofing nose.

• Stitched together on one side of the width of rectangular parts to obtain a long tape.
• It takes one of the circles and compared the seam.
• The same is done with the second round.

Tip: If the seam is not too smooth or neat, it is trimmed with a decorative border.

• The resulting puff cover is stuffed with any suitable material.
• Lightning is sewn into the non-refined edges remaining in a rectangular tape.

The photo shows the scheme of the manufacture of a puff in the simplest way.

In a similar way, you can make a ottoman having a cube shape. The difference in the manufacture of parts that must have a square shape, and for the manufacture of the sides will be required from the tissue to perform four parts, and not two.

Then:

• Details are compared with each other.
• For a clearer designation of the edges of the cube, you can use the canvas of another contrasting color.
• Additional strength, elasticity will give more dense tissue.
• A packing of such a pouf can be performed by syntheps and foam rubber. These materials perfectly hold the form and are not deformed.
• A hole for stuffing the material is made from the bottom of the puff so that it is not visible.
• If you wish, it can be shot down tightly after packing a puff, or insert a zipper, to possibly replace the material if necessary.

Sewing Purphic

• The video in this article demonstrates the order of tailoring of the Purphic of 8 elements. For this, the sheet of paper is folded in four, it is drawn on it and the template is cut on the scheme below.

• The template in the deployed form is fixed on the fabric and the cutting of the blanks in the amount of 8 pieces begins.

ATTENTION: On the pattern it is not necessary to acquire a new fabric, you can use old deposits of knitwear, old sweaters.

• The photo below shows that the sharp end of each hexagon bent into approximately 5-6 cm and stitched on a typewriter, which allows you to get an octagonal hole for packing a finished product after assembling all items.

• The billets are in pairs to each other with an indentation from the edge of about 1 cm. The pairs are folded by the front side so that the seams are from the wrong side, in the stitched form there are 4 segments of 2 billets.
• Similarly, they are stitched in 2 sections and obtain 2 halves of the future of the Pupination.
• The halves are connected on the machine between themselves, the case turns on the front side.
• The emblem is stuffed with a prepared filler (hollofiber, foam, syntro), and the hole is closed with a cap of the corresponding size. The edges of the lid should be processed, and it is manually, gently sewn from above the padded hole.
• Instructions for beginners recommends to sew the emblem literally three seams. For which 2 circles are cut, the diameter of which is about 50 cm or 2 squares if the clear lines like more. Geometric shapes will serve as the riding or bottom of the future product.
• From the same material or from another, a strip of size corresponding to the length of the circle or the perimeter of the square is cut, the bandwidth depends on the height of the POPI. The height of the PUPPIC, in turn, is selected depending on the function that will be performed by the product, whether it is a stand under the legs, the seat in the hallway, toy for young children or design in the living room.

ATTENTION: Cutting stripes for the sidewall of POPIC is made taking into account points on the seams.

• The work is done in such a way that the seams are from the wrong side, the string is sewn primarily to the bottom of the product and only then to the top.
• After the drainage of all seams, the Pufik turns on the front side and stuffed.
• According to the same patterns, which are presented at the top, for the first option and for the second, there are covers for a lightning. This will allow in the future to wash the case or clean it without any problems and costs in time, and do not solve the task how to enjoy the cafe with cloth if it is already made of fabric.

Reliable base of plastic bottles

• Plastic bottles are available in every home in an unlimited quantity. Take at least bottles of beer and water with a capacity of 1.5 - 2 liters, their color in the finished product does not matter, but to unload the ruins in the yard and the house they will help well.

1. For the manufacture of good, stable PUPPI will take no less than 16 bottles with a capacity of 1.5 liters or 9 pieces of 2 liter.
2. The cardboard of the packaging container from household appliances is also waiting for its turn and is not thrown over for years, and suddenly a refrigerator will break, how to carry it into repair? The video in this article will show how the cardboard is used in the manufacture of plastic bottles.

1. It is necessary to stock tape, foam rubber and upholstered material.

1. Pistol with hot glue, lightning for a cover.

ATTENTION: From round bottles, you can make an even larger circle, square or rectangle, that is, the form of the product is selected from its preferences.

• For convenience in the work, if a very big empty is planned, the bottles are connected in separate sectors and the sections of the scotch, and then the formation of a common structure begins.

1. If the future product is planned for a round form, then the pen is needed, starting from the middle.
2. For this, the bottle is taken and, the movements along the radius, new items are attached to it, which are carefully fixed by scotching to each other.
3. After completing the circle, the base of dense cardboard is cut. It must be in size a slightly more design of bottles.

1. Cardboard mount is also performed by adhesive tape into several layers. Once again stop at that moment that the grounds should be harvested 2, there is no need, and everything is clear.
2. It was a turn of a soft upholstery, for which two parts for tops and bottoms are cut out of the dense cloth of the foam rubber, which are stuck at the place.
3. From the remaining portion of the foam rubber, the rectangle is cut around the size of the circle line, which turns around the puff.
4. The final stage of sewing the cover from furniture fabric remained, preferably on zipper. This operation will allow not only easy to remove the washing case, but also to make several options and from time to time to update the appearance of your product.

Baby Raritet Puff

How to make an otfik from stool so that Babushkin Rarith served not yet one year?

Indeed, the stool made of durable wood, painted with oil paint, is kindly combed at one time, can rely for many years to please the owners, but the appearance does not correspond to the modern setting. Provide the interior will help the alteration of the old stool into a stylish otfik.

• Pre-design stool is strengthened with self-draws.
• The legs are slightly shortened - do not forget to control the level so that the emblems will not be saturated.
• The framework of the future of the Purification is collected, for which 4 sheets of plywood are used. They are attached with self-drawing to the legs of the tobabere.
• The fifth sheet of plywood is screwed down and serves as a bottom of the future craft.
• The seat foam rubber is cut in 5 cm.

ATTENTION: the upper part of the PUPPIC is missing with glue, then the foam will not be shot down with time in an untidy com.

• The upholstery fabric on the seat is attached along with the foam rubber using a staple bracket.
• The foam rubber from the sides can be attached by rails that help to give a round shape of the aspiration and make it more beautiful.
• The cloth is drawn up by the remaining part of the design, fixed with brackets.
• The wheels are screwed or, as in the photo, the top, from under the flirty upholstery, looks pretty legs of an updated stool.
• The challenge how to make a stool ottik, solved in a short time.

For lovers knocked

A rich Russian is a lot of associations and questions. How to knock, where to knock when knocking? For those who love to knock down the hammer on the nail offered the father's hand to do with the boards and chipboard.

• Rectangular pieces of 40x30 cm from chipboard are pre-prepared from the amount of 4 pieces.
• Circle diameter 30 cm and wooden shells 4 pieces.
• Glue for wood.
• Furniture wheels with special fasteners.
• Metal corners, screws.
• Porolon and upholstery fabric.

As you can see, the set of necessary materials is not much different from each other, when we make the emblem with your own hands, even in different ways:

1. From the rectangles the box is going. Metal corners, screws are running, all the corners of the design are aligned, they must be straight.
2. At the bottom of the glue, the bars are fixed, on which the wheels will be in the future.
3. The base is attached from above on an individually selected form.
4. The finished frame is rich in the same type of technology using foam rubber, fabric and zipper on a case.

For lovers knit and fill

How to make your hands the emblem frameless and so soft. Handwriters owning a crochet will be able to link a soft emeth much faster, but they can not like their appearance.

Lovers work with the knitting needles represent the interesting models of the deputies related to them:

• For work, you will need the most thick knitting needles, which are in stores.
• For spokes with a diameter of 9 mm, rather thick wool is suitable.
• Ordinary threads offered in stores are too thin. The price of them is not high, but due to the fact that they will have to make thicker, gossiped them among themselves, will have to acquire a sufficiently large amount that will add product costs.
• Of course, you can cut, dissolve, twist unnecessary knitwear, which takes a lot of time, and find home the right amount of one-day knitted clothes that came into disrepair is quite problematic.
• It seems that the solution to the problem as with your own hands to make the emblem went to a dead end, but fell on the eyes of cotton ropes.

Attention: Lowering synthetic ropes are not suitable for this work, and cotton ropes are problematic to buy in small cities.

• For a soft punch, sufficient sizes will need 20-30 such ropes that are binding to a long rectangle.
• Rope fastens side to get a spacious, wide skirt.
• The rope of the same color is tightened by the bottom and it turns out a bag that needs to fill something. There are 2 options here - use the old bar, neatly folded on the shelves in the closet or go to the store and purchase a foam or holofiber.

• From an unnecessary older, the emigeration is obtained heavy and not so round and lush, like from store materials, but the place is released in the closet for new clothes.
• The top of the Purph is drawn up by the same rope and you can try your product.

Puffy from the old bucket

Here is another interesting solution for which we need: old plastic bucket, a thick rope from jute, a hot glue gun, a stepler, scissors, a handle from a furniture locker, a ribbon velcro, a fabric for upholstery and several new rags from microfiber. You will also need cardboard, but it will be better if it is replaced by a subtle plywood.

• First of all, wash the bucket and remove the metal handle from it.

• Next, with the help of hot glue, skid the outdoor surface of the bucket with a rope, ranging from the bottom.

• The end of the rope doit and neatly hide.

• Put a bucket bottom to the cardboard and circle it. On the scheduled template, spread the upholstery fabric and cut a round billet with a release of 5 centimeters.

• We do in the center of cardboard and fabric hole. We produce a bolt from the furniture handle through them and screw the knobs.

• Next, we turn the fiber into the tube and radially wind the bolt between the cardboard and paper, creating a kind of roll. To the fiber does not unwind, reliably fix it with glue.

• The tissue is then stretched and fixed on the back of the stepler.

• To hide the traces of cardboard, close the back of the seating by another piece of fabric to be placed on the glue.

• Cut the velcro to four equal segments and make their cross-crosswise on the bottom of the bucket and the base of the saddles - bristles to the bucket, and the fluffy part to the seat. Connect two details. Hooray! Puffy ready!

As a result, it turns out such a beneficial handicraft to which you can sit comfortably.

Various options provide the ability to solve the task, how to make the ottoman emptying itself, in the prosperity of available in any house. The only thing that I also wanted to focus on the floor indoors.

Laminate is quite sensitive to mechanical loads, so it is better to make the ottoman without wheels and legs, that is, with a solid bottom. On the soft coating, carpet, carpet is appropriate aster with rollers, but for tile coverage there are no restrictions, unless wrought-made legs can be an exception.

Padda Pad

In one toast, the hero of the "Caucasian captive" expressed the very essence of being so that "our desires coincided with our capabilities." There is a free time and the desire to make the emblems with your own hands from the chipboard, it is necessary to prepare opportunities.

• Tools and necessary materials are suitable in advance.

• Good doctrine do not do without a good bottom of the word chipboard. The optimal size of the structure is within 400x400x500 mm.
• It is possible to make a woodcutting a wooden technology by simplified technology, making a frame in the form of a mailbox from a bar and fasten the side by the side by the cutters, but since the punishment is done for yourself, then you can try.

Work with pleasure

With a bad mood for the work should not be taken: something falls on the leg or you will not get a hammer on the nail.

• It is placed, cuts out of the chipboard of 5 squares 400x400 mm for the manufacture of wall structures and the bottom.

ATTENTION: The bottom of the PUPPIC should not be made from plywood, small children love to hide in secluded corners, can break the thin paneur and get injured.

• The lid is performed by any geometric shape: square, round, oval. Newbies may not experiment and dwell on the square lid. It will have dimensions a few more basic box 430x430 mm to protect it from bumps inside.
• The height of the finished product is folded from the components of the elements - the height of the structure is 400 mm, plus the rollers 50 mm, the bottom and the tire with a thickness of 32 mm, the upholstery is laid in 50 mm, and 532 mm.
• From the prepared elements begins the formation of a design.
• Blood sidewalls are bonded with metal corners. Strengthen stiffness and reliability will help bars that are punctured all internal angles.
• With the front side of the Purphin, the bars are screwed into the bars, the hats of which should be recessed into the tree so that they are not having problems with torn upholstery.
• The bottom of the box around the perimeter is drained to the joinery glue, capturing the ends of the bars.
• The bottom of the PRIFIC is fastened, and the cuts are again screwed into the ends of the BRUSEV. The collected design should dry well.
• The basis of the PUPPIC is made, but there are no wheels and the lid, on which in the future you can sit.
• The lid fixation is carried out by 4 bars screwed from the inside. The work is performed after there is a confidence that the lid closes freely and the bars of stiffness from the side do not interfere with the closure of the lid.
• The finished design turns over, and wheels are attached by the cutters.

Attention: they are fixed through the bottom to the ends of the bars, for which small holes are drilled in the bottom.

Before continuing to work, it is necessary to make sure that the resulting design is sufficiently stable, well holds the sitting on it and there are no shortcomings that prevent further work, otherwise it makes no sense to start upholstery.

Puffy dress up

The baffy of the tree is your own hands, from the chipboard or generally soft needs clothes from above. This function is performed with an honor perfect, the upholstery fabric, neatly attached to the structure of the structure.

• First, the PUPPI cover is drawn up, for which the soft lining of the foam rubber, synthetone, and batting is cut. The size of the lining must match the seats parameters to carefully, not hang, be glued to the place.
• From the fabric intended for the upholstery, the blank is cut down several large sizes than the lid. This is done so that the edges can be beatened under the cover and secure them from the inside the stapler or furniture cloves.
• The instruction instructs further execute the sides of the Purphic.
• Detail of upholstery fabric 400 mm x 4 \u003d 1600 mm with a reserve for a connection is cut. Also in height, the material must have a battery from above and below.

ATTENTION: The fabric needs to be fired, pull, turn inside, edges to fix with furniture cloves or stapler.

• The seat design is performed, niche is rushing, all edges are neatly closed and you can make a finished product on the control of collective members of the family.
• The baffic of plywood is performed with their own hands on the same scheme if an option of this simple design is selected.
• The work is a little more complicated when the drawer is provided on the ottika, then the bars are replaced by the door loops.

I get acquainted with the design of this simple piece of furniture, one detail rushes into the eyes: despite the difference in the forms of the aspirations and their species, the base serves the rigid frame, there is a seat and legs. They decorate them in different ways, but the sealed skin or the leatherette give the products an elite, luxurious appearance and immediately do not define that the price of the product is within reasonable limits.

Although it should be noted that a neat emblem, covered by another material, can bring comfort and convenience to the room and looks no less elegant than the leather.

Theme of this article - how to make the otfik do it yourself From the primary materials. There are such situations when you want to update the interior with some original subject and make yourself decorative pillows, a chair bag, puffy. Therefore, the best way to update the interior of your housing is to do anything with your own hands. For example, the aspic.

There is no financial opportunity to purchase Fashionable, comfortable and modern ottoman. Homemade Puffy has a number of advantages over the shop. At least in the fact that for him you can choose exactly the colors that you like are combined with the color range of the interior and perfectly fit into your situation. Moreover, in the store it is not always possible to find what you want.
Make the father-in-law do it yourself very simple. For this purpose you will need a self-tapping screw, a screwdriver or a chisel, hacksaw, a hammer. If you want to make a soft aspic, then take the fabric, preferably bright and colorful, sharp scissors, needles, threads, hollofiber, foam or sintepon, and, of course, the sewing machine.

Armed with these objects, you can proceed to work. To begin with, the inner case for filler (foam rubber, holofiber or sintepon). To do this, you need a dense fabric from which two circles are cut, the diameter of which should be approximately 50 cm or two squares in the event that you want to make a square emblem. Two these geometric shapes will serve as the top and bottom for the future puff.

Then the strip is cut from the same material as the base of the pouf. And the length of it must coincide with the long circle or the perimeter of the square. As for the width of the strip, it completely depends on the height of your homemade Purphif. When you cut a strip, remember that you need to leave some fabric to allow the seams.

Then begin to sew a strip from the wrong side: first to the bottom of the Purif, then to his top. And you need to start sewing along the length of the strip. After all the seams are ready, turn the penalty on the front side, type the filler and squeeze. In principle, you can enjoy zipper, which is much more convenient: for example, to clean the pouf or replacing the filler.

Everything. The basis for your PUPPU Ready. Now you can proceed to its design. For those who know how to sew, it will not be much difficulty. After all, you can not just rolling the pouf beautiful and a motley cloth, you can embroider the original pattern, for example, create a certain fantasy ornament, as well as a relief pattern. As a fabric for a cover, you will wear anything: jeans, drape, silk and even cotton.

She is sewn, as well as the base, of three parts. First, the sidewall bands are connected, and then the bottom is sewn. As for the top of the Punch, it should be attached with lightning or buttons. At your discretion. Thus, the emblem is ready to delight the eyes and serve as a beautiful seat or footrest.

We make a simple, but very modern emblem from cardboard and plastic bottles with your own hands.

How do you sew a modern and comfortable emblem with your own hands. Master class with photo stages.

Interesting variants of handmade puffs from different materials that you can do yourself.

Who did not want to update the interior of the apartment or at home? In such cases, various additional furniture uses. Traditional sofas are much easier to purchase in the furniture cabin, but it is more interesting to make the ottomans independently. About how to make a father-in-law, you can learn from this article.

The emblem appeared in Eastern Europe many centuries ago, the Motherland of the Pufikov - East. These items quickly won great popularity. Recently, they were given an important place in small city apartments - a mild empty of multifunctional.

Someone will say, why do it yourself, if you can buy everything now? Yes, it is so, but self-made furniture compared to the factory has a lot of advantages. So, the color, dimensions, shape, type of upholstery are selected independently. For the production of puffs, any healthy materials that are in the house are suitable. So, it is possible to make puffs almost without investments. See how easy it is to make pouf with your own hands from different materials.

Before starting work, you need to tune in to simplicity and ease. The one who decided to make puffs do it yourself, the master classes of the best needlewomen will help in work - all operations are written out step by step. So, for work it is necessary the following - this is a sewing machine, fabric, padded materials, as well as paper. It is applied pattern pattern.

How to make a soft pouf:

1. First of all, we will make the pattern - there are many options, just find them and choose what you like. Then the template is transferred to paper, and then on the fabric. Eight blanks on a pattern made of harvested fabric. You can buy a new fabric or to use old clothes as a material.

2. On each of the eight blanks bend the angle of 5-6 cm inside, and then passionate. This is done so that after the assembly it turns out a hole in the upper part - a package will be laid through it in the puffs.

3. Then the workpiece from the wrong side sew with each other in pairs. In the process of cutting, you should not forget to leave the allowance - 1 cm from the size of the pattern. So, there should be 4 details.

4. Also sewn two elements - these are two halves of the product. Then they compare them together and turn the product. The finished cover is stuffed in advance with the material, and then cut out another part in the form and the size of the remaining opening and manually sewn to the case.

Sew the case for Purph is completely simple, and the result is a pretty and original furniture. It is not necessary to apply the tissues of the same color - multicolored products will make the interior more alive. Particularly different colors are relevant for children's rooms. A bright pouf will have to taste with young children - they will play with him.

On video: Soft pouf do it yourself.

Classic Pufik

Making the deputies with your own hands in the classic style:

1. Start recommended with legs. To do this, take two boards - the length is 48 cm, the cross section is 5 × 5 cm. They are cut under 45 degrees, and then knock together - as a result there should be a cross. Then, another bar is glued to the cross, the length of it is 35 cm. For reliability, it can also be fixed with a self-tapping screw. On this bar fasten the same cross.

2. The seats are made of plywood or from chipboard - take the material with a thickness of 10 mm, dimensions - 40 × 60 cm. Under the paneny sheet, foam rubber is placed. The thickness of the layer is 10 cm. Also laid foam rubber - the material must be cut off with a certain stock so that it is bent. Porolon must be beaten and nail to a plywood sheet. Take a fabric for upholstery and fix from the wrong side of the sheet. The upholstery is better to be attached with the help of decorative nails.

3. To the crosses additionally nourish boards-cross. Then the wooden structure is processed by a verse. The seat is fixed to the base and legs. As a result, a pretty empty is obtained.

Option of old tire

The car enthusiasts in the garage accumulate tires - of which the original furniture will turn out. Let's see how to make a round ottoman with your own hands:

1. Take Phaneur and cut two round items from it. One circle should have the size of the inner diameter of the tire, the second is cut on the outer diameter. The legs are made according to the template. The pattern will diverge and drink a blank from a suitable board. For PUPPU, you will need four elements with your own hands.

2. The legs are fixed on a circle with a large diameter - this is the basis. Details are fixed with the same intervals. You can strengthen the design with bars. Pre-billet for the legs are painted and glued to the base. Additionally, you can enhance the mounting corners.

3. Then, the layer of glue is applied to the base with legs and the tire with a wheeled disk is applied from above. Next, the glue is flashed onto the lid, and also glued to the top of the wheel. Then the tire is wrapped up and is covered with a rope - you can glue on the thermoclay. Excellent if you use rope of different colors. After that paint legs.

These furniture items will not be too soft, but this is an original solution that can decorate any interior.

On video: Puof from the car tire do it yourself.

Wood model with a box for trifles

For manufacture, you must have wood skills. It will be a practical and soft ottoman with a convenient and multifunctional box. On the bottom will be installed wheels for better movement.

For production, a laminated chipboard is necessary - they will be made of a circle (circle diameter 30 cm), and 4 rectangular blanks (dimensions 40 × 33 cm). You should also prepare four brus with a cross section of 4x8x8 cm. You need glue, wheels for furniture, fasteners, self-tapping screws. From the tools you will need only screwdrivers, but better drill or screwdriver. For packing, foam rubber will be used for decoration - fabric.

To sew covers for the emblem with their own hands, it is desirable to have a sewing machine. Consider the phased instructions:

1. Take the sheets of chipboard and connect them to get a box. In places of connection, the box is glued. At the lower corners, places bars, fasten with self-draws and additionally missed glue. On bars, the wheels are fixed below. The lid is attached with self-draws and glue. Frame ready - now you need to decorate.

2. Take furniture fabrics - they are less susceptible to wear. On the shape of the lid box make the pattern of the top of the cape. It sews a strip of a tissue width of 10 cm and we are caught. How to shepherd Puffy, tells fantasy. A layer of foam rubber is put on the lame for softness. Top stretch cover. Soft doors ready.