Modern life is no longer possible to submit without the use of rolling shutters or rolls. Installation of roller blinds on the windows, doors, cabinets and other places in need of protection has become a common phenomenon. They are beneficial in the protection of premises, protection against noise and dust is difficult to overestimate. And if in private possessions they are mainly used inside apartments and houses, then commercial organizations, trading places, garages most often use them to protect windows and doors from hacking.

In contact with

Odnoklassniki.

Device roller blinds

In general, roller shutters are a variety of well-known blinds, but having a more advanced design and high strength. Rolling canvas consisting of cloths of various lengths, widths and material, wound on the shaft.

Note!

The shaft can be hollow and manufactured from galvanized steel.

In the raised form, the shaft with swollen lamellas (rolling canvas) rests in a protective box. Stiffness ribs for protective boxes are the side panels, and the lifting and lowering of the canvas occurs on the guides.

Types of rolling shutters

1. Roller shutters with tape control. Such designs have small sizes and low weight, not exceeding 15 kg and are very convenient for installation into small sections. For example, a roller shutter for a cabinet is used by this type. They are also used to protect windows, sewer block in the toilet, in the bathroom. The main advantage of such a rollt is their price.
2. Roller shutters with an inertial spring. They have large dimensions than the first type, and their weight reaches 55 kg. They are controlled by pulling out the spring and are fixed using the bottom lock and side valves. When using such structures, it is possible to output control over the wall.
3. Roller shutters with cardan gearbox. The basis of the work of this mechanism is a cardan transmission. Such rollers can be closed both upper and lower locks. When used, control occurs through the wall, by rotating the gate. The main advantage of such roller shutters is the possibility of installation on any profile, low price and enough weight.
4. Rollers with a cable-reducer control. Management is made by simple mechanisms and can be carried out, including through the wall. The weight of these structures does not exceed 55 kg. They can be installed on any profile, and the installation is made on the opening of any width. Such riglete locks and side valves are closed and used, most often like roller shutters on the windows.
5. Roller shutters with electric drive. Powerful designs with a motor that can lift rollers weighing up to 150 kg. When closing-opening, they work silently, and there is an opportunity to manage them remotely. Roller shutters can be installed on any profile. The price of such mechanisms is higher than that of previous species.

Preparation for installation of rollers

If you decide to independently install a roller shutter in the toilet or on the window, then you need to adhere to the next order of action. To begin with, you need to make measurements of the opening where rolls will be installed. Based on the values \u200b\u200breceived, you will buy the desired option.

In addition, it is necessary to estimate the quality of the walls of the opening. They must be perfectly smooth. This quality we check the vertical construction plumb, and horizontally water. Uneven surfaces align in advance, as subsequently, these problems will be harder to eliminate. After we deliver the box, the gap between it and the wall should not exceed 5 mm.

Assembly of the carcass

By installing a roller shutter with your own hands, you should know that the next operation after measurement is the frame assembly. It is installed in accordance with what control system will be applied. From this will depend on the magnitude of the stroke (furrow), through which the controls are entered.

For example, if the lifting mechanism works with a cord and an electric motor, the diameter of this groove itself should be 12 mm, and it should be increased to 22 mm in the control system. After you laughed the channel of the desired diameter, the box and guides are installed.

The holes for fixing the frame are made at a distance of 50 cm from each other. At the edges, an indent must be 10 cm. But such indents are characteristic of street rolls, and if you are assembled to mount furniture rolling shutters, then the indents can be made less. After drilling holes, you need to put the lining on the opening, which serve as the basis for mounting the box.

Installing a box

On a prepared level surface, with pre-installed tires, you need to install a box. First, using levels, determine the spatial position of the box. Then, using dowels and prepared holes on the box, fix it to the walls.

It is especially necessary to take into account that the final fixation of the design should occur evenly, in order to avoid possible distortions that are so often occurring. It is necessary to know that the shut-off roller blinds will have an inesttic appearance and most importantly, it is difficult to manage. The lowering-raising system will work tightly and extraneous sounds may appear.

Roller shutters for windows and doors

Installation of the control system

After mounting the case, you will need to start setting controls. To do this, use the instruction attached when purchasing. It can be indicated by some features. Through the stroke (furrows in the wall for cable and wiring) we bring cord, tape or shaft. This will depend on the management system used. By the way, plumbing roller shutters in the toilet or the cabinet do not require execution, since there is controlled by the usual handles.

Installation of canvas

The final step on the installation of roller shutters is the installation of a web. For this plate, the plates are fixed to the shaft by the rigels or, in other words, automatic locks. After that, we set the stupilities to fix the canvas in extreme positions. We finish working with the connection of control elements.

Now you need to check the operation of the roller mechanism and, when deficiently detects, quickly eliminate them. It is especially worth paying attention to the tight course when the descent and excess sounds are lifted. This can significantly reduce the life of the mechanism. Initially, problems can be easily union, subsequently, the work of rolling shutters under additional load will only lead to their exacerbation.

Some other types of rolls

Protective shutters from the outside of the window are very popular, but often the internal rigs on the windows are also installed. They perform not only protective functions, but also cut apartments from excess noise.

Note!

The only drawback of such a design is the vitality of the window from the outside.

Installation of roller blinds in the toilet hides the sewer pipes. In addition, such protection has a beautiful appearance, so besides, they provide free access to sewage, and this is much more convenient than to get to the accident site through the tile box.

Rolling on the cabinets allow you to save space in the apartment, as they open strictly up and down, and also have a more original appearance than ordinary doors.

Installing roller blinds with your hands video:

In contact with

See inaccuracies, incomplete or wrong information? Do you know how to make an article better?

Want to offer photos on the topic?

Please help us make the site better! Leave the message and your contacts in the comments - we will contact you and make a publication better together!

There are no difficulties, but they arise according to the most seemingly simple reasons. For example, it is better to make a riser with communications and make it with the possibility of accessing each node, to the floor and ceiling. There is a simple solution, install rolling shutters in the bathroom. And everyone can do it.

Communications in a modern bathroom is much more complicated than there were some 10 years ago, and therefore access to them should be around the clock. Remove the meter readings, check the valves, overlap water, check the integrity of the pipes and protect yourself and neighbors from the accidents - all this must be done with an enviable frequency.

A previously practiced method to sew risers and communication with plasterboard or plywood walls, followed by facing the cafeter did not justify itself, since the left little window did not allow repair work. In the event of an accident, it was necessary to completely dismantle the whole structure, which is very uncomfortable, costly and requires additional efforts and financial investments for restoration work.

The solution found is to establish plumbing roller blinds for communications showed itself the best option in all respects.

Roller shutters or rolling blinds are tightly adjacent parallel plates (lamellas) moving along two guides.

Roller shutters are convenient for such indicators:

• communication completely hide;
• access to communications is no difficulty;
• hidden mechanism and compactness assembled;
• excellent aesthetic indicators and wide range of colors;
• easy installation allows you to not invite a specialist, but to do without your own;
• have a simple durable mechanism:
• provide sufficient level of sound insulation;
• easy to manage and operate;
• hygienicity, bacteria do not multiply on the surface surface;
• ease of care, lamella material is not afraid of aggressive detergents;
• the mechanism and canvas of the roller shutdown is resistant to the wet medium of the bathroom.

Roller shutters in the bathroom are installed anywhere, at the right height and serve for many years. Even if in the bathroom there will be several repairs rollers can remain the same, their durability and practical mechanism allow the system to work for a long time and successfully.

Parameters Rolvtolen

Basics of choice

Plumbing shutters with plastic panels The most popular model, they are easily clean, are easily mounted, not subject to corrosion, affordable. But faster come into disrepair, because plastic soft material and wear happen faster. However, if it belongs carefully, they will serve long enough. Plastic lamellas can be saved by film or apply a photo printing, which will add aesthetics to a bathroom or toilet room.

Metal lamella roller shutters are more durable, especially if made of steel, but have a very high weight that is rarely necessary in the bathroom. In addition, the lamellae made of metal can be rusted with time in a wet bathroom environment, which will very much appear on the general form of the room. Also, a heavy metal curtain is very difficult to lower and raise.

The most acceptable and weighted version - aluminum roller shutters in the bathroom. The lamella material is easy, does not suffer from water, double colorful coating allows you to choose a color gamut, use it easy and pleasant. In addition, the aluminum design will last long and will survive not one repair.

The remote control of the roller shutters is definitely very convenient, but if it comes to a small device in the bathroom, then such a control is justified if the possibility of manual (mechanical) control is difficult.

As a rule, in the bathroom, roller shutters are installed with spring - inertial control and the possibility of installing an additional turning, which is relevant for designs exceeding human growth. In addition, this system makes it possible to open the opening at the current height.

Installation conjuncture

Deciding with the main technical characteristics, it is worth thinking how the rolling shutters will be mounted in the bathroom. Installation is carried out in two ways built-in and overhead.

The invoice of the installation method is most often carried out when all repairs are already completed and there is no possibility to hide the system.

The roller shutter includes a box, tires, guides, lamellas and a shaft with a protective lid.

The first tires are mounted on which the box is fixed. Using anchor mounting, the tires attach to the wall, the box to the bus is joined by a dowel. An important point when installing the box is its location relative to walls and gender. Starting a box, at each stage, check the horizontal installation of its installation level and adjust as needed, achieving the ideal location. From this depends on the further operation of the rollt. The displaced box and the shaft will not be able to control the lamellas, and the entire system will lose efficiency.

Pluging the shaft and guides, attach the web with lamellas using rheaglels. The next step is to install the stoppers, they regulate the fixation of the canvas anywhere.

At the last stage, check the passage of the guides - Open and close the rolllet several times. Properly installed rolling shutters do not creak, open softly and smoothly. Now fasten the protective cover on the shaft.

If the repair is still in full swing and plumbing roller blinds are mounted before the wall cladding and floor

→ Sanusel

Features of the roller shutter in the bathroom from the company "Estok"

Roller shutters, usual on the doors or windows, you can now meet in toilets and bathrooms. True, the function in the bathroom with a roll is a bit different. Most often, they are designed to hide the opening or niche in which unattractive communications are located. Such roller shutters are very convenient if the meter readings is regular or changing cartridges in filters.

Roller shutters in the bathroom: purpose and dignity

Any bathroom can be divided into visible zone in which facing, furniture, plumbing, as well as hidden zone presented in different ways connections, communications, valves, counters and similar.

To distinguish them and make the interior of the bathroom more attractive, use different technical solutions. For instance, plastic or fabric, That is inexpensive option but at the same time little aesthetic.

Deciding to close the Communications dupped box, You worsen access to pipes; Even if you leave luke, he may be away from the place of leakage.

More aesthetic and attractive views jalousie need special care and do not save from noise.

Contemporary and gaining increasingly popular way hide communications and equipment in the toilet and bathroom is an installation of roller shutters . They have a rather attractive view, allowing even improving the interior of the bathroom. When it is necessary, rollers quickly rise, opening full access to the meter or pipe.

The next dignity is excellent noise insulationthat when used in the bathroom plastic pipes It will be a valuable factor. In addition, the roller shutoff installation can be performed independently, allowing you to save on their installation. Rollers are made of hygienic material that can withstand wet cleaning. Thanks to powder coating rolly roller shutters durable and long time saves the external appeal.

Roller shutters will help hide shelveswhich are stored for washable funds, household items or tools. With such a finish, the appearance of the bathroom will not suffer from the type of mop, rags and powder boxes. And you will get the opportunity to use the bathroom space with greater rationality, at the same time reducing the litigation of the dwelling.

Roller shock design for bathroom

W. plumbing roll It is the same as those installed in the windows and doors rolvtolen. When opening a canvas, which is separate lamellas, wounds on the shaft, which is hidden in the box (it is mounted or outside the opening, or from the inside).

Inside this shaft is available balant design springinterfering with spontaneous unwinding of the canvas. When the shutters are closed, they are a dense web covering a niche. Closed position rollt can be fixed shekoldbut more reliable option will be the usual outdoor castle.

If the baton has a width of less than 52 centimeters, the spring mechanism is not used, but set roller shutters that have a cord mechanism.

Recommended installation of roller shutters for a full height of the proSince it is impossible to guess, in which the pipe is formed to flow. Closing tightening even part of the goat, you lose the main advantage of this option - ability to get to all communications.

How to choose correctly

The selected characteristics of roller shutters affect their functionality and cost.

First of all, it is necessary to measure the proceedings to accurately determine the metric indicators of roller shutters. So you will learn the width and height of the desired product, as well as the size of the box, which are directly related to the length of the roller. Next, you need to select the type of drive, which will be saturated and unwind the canvas. The best option will be inertial springbecause when configured it will allow fix unlocked shutters at the desired height.

Shuttle tracks with an automatic lifting system cost more .

The next nuance of the choice of plumbing rolls - their method of installation. The whole design can be mounted inward in the opening or present an overlay from the outside. Also need to decide who will be engaged in the installation of rollers.

For self-installation, some knowledge and ability to apply additional equipment to repair are required. Installation errors will not only exclude the warranty service of the product, but also spoil the root of the bathroom. If you doubt, it is better to trust the installation of the company's design that sells rolling shutters.

It is important to decide on the appearance and the material rolls for the bathroom. The most common products from aluminum profilecovered by the factory painting preventing corrosion.

Often installed in the bathrooms plastic roller shuttersSince such a design is easier, and its color palette is wider. Having installed in the bathroom decorative rollersYou and Support the design of the room, and you can add an interesting color solution or image.

If rolls are selected for the bathroom not in a private dwelling, but in a public place, important resistance to hacking . A good choice will be steel rolling shutters With a locking mechanism of high quality.

Exterior decoration

For the arrangement of the bathroom it is worth noting not only the most practical decision. If roller shutters are successfully selected, the design will also be aesthetic. Roll floor lamellas are painted with powder coating capable of transferring intensive operation, moisture and temperature drops. Therefore, they are suitable for use and on the streets, and in the bathrooms.

Since the colors of the roller shutters produced is very diverse, choose the appropriate shade, to the interior of the bathroom and the toilet is very easy. Neutral decision will be white rollersbut do not miss the opportunity to add to the design of the bathroom photo printing or picture. So you can turn roller blinds to the central interior object of your bathroom. If your bathroom is laid out with a tile of several shades, it is possible to order a rollt with a suitable design to such a decoration. Manufacturers offer cloths and boxes in different design options, but before buying it makes sense to look at them in the finished interiors of the bathroom.

Handles for roller shutters are also very diverse. They can remind conventional door handle, present hook, ball, semicircular bracket or something different.

Methods of installation and installation features

About installation of sanitary rolling rollers It is optimally thinking when the repair of the toilet and the bathroom is carried out, the pipes change, filters, counters and other equipment are installed.

Set rollers at this time - to avoid spending on a separate installation required if the repair work has already been completed. By installing plumbing devices and changing the pipes, you will immediately see what you need to hide and in what places the roller shutters will be appropriate.

How and where to order

TEL. . : +7-495-589-8676 , +7-925-514-6896 , +7-925-514-6897 . E-mail : [Email Protected] ,

Here you will find:

roller systems

Tips for the choice of roller blinds for home (On the balcony, windows and doors) :

when installing rolls for the house at the design stage, it is applied built-in combined mounting or mounting directly with the window ;

if the pasists are already decorated, and the windows are installed - apply overhead installation,

for cottages and country houses are preferable anti-vandal rolling systems with a high security class;

choosing an inexpensive control option, you can stay on spring mechanism with leaks , and with a large number of rolling systems in the house, preferably the presence of electrical rollers with remote or group control,

do not forget about the built-in mosquito net. - It is provided in many rolling systems.

How and where to order

TEL. . : +7-495-589-8676 , +7-925-514-6896 , +7-925-514-6897 . E-mail : [Email Protected] ,

ready rolling shutters .

Here you will find:

different with flowers, features and price Electrical or mechanical roller blinds: onto a balcony, onto the gate, windows or doors, etc.,

calculation of the approximate value

excellent service - our experts will help you choose roller systems , will take into account all your wishes, measure and calculate the cost,

fast order of order, pleasing all our customers,

the quality of our roller shutters - mechanical or with an electric drive - excellent and time-tested!

Whether the rollers are transparent ?

Yes, there are four types of transparent rolling shutters:

Perforated rolling shutters - Perforation in the form of alkaline in the castle (upper) part of the profile

Rolled grilles - Translucent profiles with rectangular windows (open)

Viewing rolling shutters - the observation profile is similar to the grid profile, but has a polyurethane insert; Consequently, such roller shutters protect against wind, dust and dirt and preserve at the same time translucency.

Plastic translucent roller shutters - Made from translucent PVC, suitable rolls of small and medium sizes (small windows and doors).

Roller shutters regulation of light flux - Roller shutter S. sliding lamellas .
The canvas roller blinds can be in three positions:

Fully open

Stretched position - Provides ventilability and adjustable lighting Premises

Fully closed - Provides protection against hacking

What is the light opening of roller blinds ?

Light open roller blinds - This is a space bounded by the guide tires on the sides and a box from above.

Light opening + guides tires + ku = Dimensions design

How and where to order

TEL. . : +7-495-589-8676 , +7-925-514-6896 , +7-925-514-6897 .
E-mail : [Email Protected] ,

You can always order installation and really cheap to buy ready-made roller shutters..

Here you will find:

different colors, functions and price electrical or mechanical roller shutters - on the balcony, on the gate, windows or doors, etc.,

calculation of the approximate value

excellent service - our experts will help you choose roller systems , will take into account all your wishes, measure and calculate the cost,

fast order of order, pleasing all our customers,

the quality of our roller shutters - mechanical or with an electric drive - excellent and time-tested!

We recommend useful articles about rolling shutters:

You can always order an installation and really cheap to buy ready rolling shutters . Here you will find: different with flowers, features and price Electrical or mechanical roller blinds: onto a balcony, onto the gate, windows or doors, etc., calculation of the approximate value excellent service - our experts will help you choose roller systems , will take into account all your wishes, measure and calculate the cost, fast order of order, pleasing all our customers, the quality of our roller shutters - mechanical or with an electric drive - excellent and time-tested! Roller shutters (eng. roll - Roll, rus. shutters ) - A type of blinds made in the form of a roll, two guides and plates moving along them. There are also names rolling, roll stand, rollet, rollet, protective shutters. Roller shutters Installed into window, door and garage proofs and are intended to protect the room from hacking, adverse weather conditions, noise, dust, light and prying eyes. The main characteristic of roller shutters is focusing on the protective function for opening. Typically, the installation practice assumes the installation of the rollside outside to protect the brakes from breaking and directly from the penetration of intruders. Based on Wikipedia Services of the company "Estok": Calculation applications can be sent by email :

We all have already familiar to see roller shutters, closing windows and doors of houses and office space. Currently, the design data is very popular and during the design of the bathrooms. What is so convenient to use roller shutters in the bathrooms, and how to choose the right model correctly: we will understand.

Features and advantages

To begin with, we will try to understand what is the rollers. This is one of the varieties of blinds, which consists of a roll, guide and a certain number of plates (lamellae) between them. They are also called rollers.

The canvas from the plates moves along the guides up and down depending on whether the curtain is lowered or rises. The canvas itself is wound on a specially installed shaft in the box. Such rolled structures make it possible to significantly save the place of the already small-sized room of the bathroom.

In this case, the main function of the canvas becomes insulation of wall communications, water meters and other unsightly plumbing components. Of course, it is cheaper to isolate the pipes with sheets of plasterboard or proflist, but here it immediately detects a significant lack of such structures - it is impossible to create a "deaf" barrier, it will certainly be free access to the pipes and counters. . The construction of hatches with hinged doors additionally grind the amount of free space than cause inconvenience to use.

Roller shutters are ideally solved by the task of concealment and have a number of significant advantages:

• allow you to hide pipes and communications;
• a wide size range will allow you to choose a design for any room dimensions;
• to ensure rapid access to pipes and accounting devices, it is necessary to simply raise the speed up, and not resort to partial dismantling of the coating;
• design compactness and simplicity of use;

• the ease of installation and fasteners process (all work will be required only a few hours);
• simple care, consisting in timely wiping dust from the surface of the lamellas with a damp cloth;
• strength and long service life, preservation of an attractive appearance for a long time;
• provide additional noise insulation;
• the ability to create the original design of the room, taking into account the taste preferences of the owner.

Views

Consider the main varieties of the rollt. Roller shutters in several parameters differ.

Blind box can be located:

• from above;
• below;
• outside;
• inside.

The types of design of the design mechanism are distinguished:

• mechanical (open and closed manually);
• automatic or electrical (moving using a special electric drive, which is controlled by a remote control or pressing the on / off button).

Due to the fact that there is no need to raise too often in the toilet too much, the second option is chosen much less often, especially since automatic control options have a much higher cost.

The mechanized option is much more practical and cheaper. The most popular are two types.

• Ribbon (cord).In this case, the tape is attached to the shaft and the lento paver, pulling the man for which the man leads the mechanism. This method is designed for loads of no more than 15 kilograms, which, as a rule, is enough for correct operation of roller shutters in the bathroom for a long time. This option is suitable for narrow openings - width up to 50 cm, for wider designs, the disadvantage of the ribbon mechanism becomes the impossibility of fixing in an intermediate position, which can deliver inconvenience when used.

• Spring inertial. This is a newer modification that is capable of fixing the blinds absolutely in any position, that is, you can always raise a slightly to the right to the right height without opening the opening completely. The convenience of the process of raising and lowering is provided by a special handle located on the lower guide. The only disadvantage of this type of mechanism can be considered a width restriction: if the design width is less than 50 cm, then the spring is simply not placed.

Roller shutters are divided by the type of profile.

• Roller rolling slats with foam filler. This option is the most economical at cost, most often such rolling shutters are made from thin aluminum sheets.
• Strengthened solid profiles are a more durable option, most often used to install in door and window openings.

The location of the lamella can be vertical and horizontal, while the shape rolllet is very diverse - from traditional rectangular to original asymmetric.

Materials

For the manufacture of rolling shutters, the same types of materials are used as for door and window structures.

You can note the most popular of them.

• Plastic - The cheapest and easy-to-caring material. Plastic lamellas have a small weight, are not subject to corrosion, they do not form fungus. A variety of color solutions will allow them to enter them in any interior. From the disadvantages of the material, the fragility of structures can be noted, but with a gentle circulation, plastic rollers are able to last long enough.

• Aluminum models.The price category of such roller shutters is already slightly higher, while aluminum lamellas are also simply washed, they are lungs, they have resistant to damage and scratch surface. As a rule, aluminum plates are covered with a double layer of protective paint, which allows you to install them in rooms with high humidity. And most importantly - this material has sufficient strength, which means a long service life.

• Steel - The most durable rolls, most often in the manufacture of stainless steel, in order to avoid corrosion in the future. Such models are rarely installed in private homes and apartments due to the high cost and lack of a large load on the design. Nevertheless, this material is suitable for installation in public bathrooms.

• Options from wood. This material is rarely chosen to accommodate in the toilet due to high cost and ability to deform in wet rooms. In order to preserve the initial view of the wooden product, it will be necessary to constantly process with special protective compositions.

I would like to note that aluminum structures are considered optimal out of the considered materials - they are not the highest cost, durable and durable.

Gabarits.

Roller shutters can be the most diverse. First of all, when choosing it is worth paying attention to the width of the opening, if it is less than 50 cm, then you can only install a model with tape control. The big width will allow you to choose a spring model.

Manual control models have a minimum width of 45 cm and a height of 40 cm, the automatic options are minimum width - 60 cm, the height is unlimited and maybe any. Guides are manufactured with parameters 53x22 mm or 53x60 mm.

Damage dimensions are determined depending on the type of profile and the overall height of the structure.

The standard size of boxes will be:

1. 1.37x1.37 m, suitable for the height of the roller shutters to 1.6 m;
2. 1.5x1.5 m, suitable for the height of the structure to 2 m;
3. 1.65x1.65 m, suitable for the height roll up to 2.88 m.

At the same time, the choice of the desired size depends on the parameters of the room, so it is very important to correctly make a measurement.

For more accurate measurements, they measure at once at several points. First, the distance is measured in the width of the opening on the left, on the right and in the middle. After that, the height of the opening is also measured from above, from below and in the center. Then you need to measure the distance diagonally to avoid possible deformation of the form after installing roller shutters. Deviations are more than 1 cm are unacceptable, as they can cause a skew or curvature of the web.

Decor

Plumbing canvases with polymer painting are an excellent solution for premises with high humidity. The paint is perfectly withstands the temperature differences, does not fade and retains an attractive appearance for a long time.

The most popular options rolls are classic white models. But if you want to diversify the interior with more original colors, manufacturers are always ready to offer countless any colors and shades.

In this case, you can allocate different design options.

• Models performed in one color- This is the most common version of the decor, the shades can be different, it all depends on the taste of the customer. You can choose a shade under the overall color of the toilet or highlight the design by selecting a brighter design option. In this case, color and white models do not have differences in price.

• Options with photo printing. Such a design will undoubtedly attract attention and add a highlight of the room. Thanks to modern technologies on the surface of the lamella, you can apply absolute any drawing at the request of the customer. You can choose a picture in accordance with the style of the room. Specialized care model with photo printing do not require, their appearance does not change over time, which adds attractiveness to them. However, it is worth considering that such models have a higher cost than one-photon.

• Perforated rollers. This is the most modern development, such models were originally planned for premises, in which the curtains had to pass a certain amount of light, even with closed blinds. Nevertheless, the original type of such models makes them attractive for installation and in ordinary household premises.

It is interesting to look color and mirrored inserts on the lamella. It is worth noting that the staining roll is made exclusively an industrial method in order to avoid deformation of the surface in the future during operation.

Review manufacturers

Currently, many domestic and foreign roller shutters are represented on the market.

They can be divided into two categories.

• Companies manufacturing profiles and components. This group presents four manufacturers - this is the Belarusian company ALUTECH and Russian firms Doorhan, Aluform and Simplex. The leader of the domestic market of rolling systems is AlUCH, it takes about 80% of this segment.
• Manufacturers engaged in installing, assembling and maintaining structures from ready-made materials. This category works with materials supplied by the first group. Note some of them.

ROLTECH., engaged in the release of rollers since 2005. The company's products have good reviews, high-quality materials and fittings are used in production. In the range, various types of designs and design rolls are represented by the range from classic monophonic to original models with photo printing and prints. There is an opportunity to order a truly unique model to your liking.

"ST-STROY"- Another domestic company engaged in the manufacture and installation of roller shutters. An extensive dealer network allows the company to supply products throughout Central Russia. "ST-STROY" is engaged in servicing a rollt with automatic and manual control.

Another popular manufacturers are the company "Rolvdnipro"engaged in manufacturing, installing and service roll. When assembling structures, aluminum profiles from AlUCH are used, as well as steel guides of German and Italian manufacturers.

Choosing the manufacturer, it is necessary to carefully examine the characteristics of the products manufactured by them, as well as the reviews left by the owners of the ready-made structures.

Why are you needed?

Choosing materials and design roller blinds to the toilet, it is important to take into account their main purpose. Traditionally, they are installed to close the communications: counters, risers, pipes and valves. Such a fence will create the effect of a smooth and attractive surface, not difficult to access the closed space if necessary.

Such a design decorated with an unusual pattern or pattern is capable of creating a unique atmosphere indoors. Using the rollerwater, you can give the original style. For example, if you apply a picture of a blooming sakura in the toilet, a kind of east flavor will appear in the toilet.

And also in the toilet, in addition to the concealment of sanitary niches, rollers can replace the swing doors of cabinets and shelves, allowing you to save the precious free space of the room.

The best option will be mounting rollers in the repair process before finishing the walls. This will allow you to hide the possible slits between the wall and the roller shutter mounting plars.

There are three ways to install construction:

1. installation in the opening, the box is installed inside;
2. fastening in the opening, the box is installed;
3. mounting a folding, the box remains outside.

Mount the box in the first case is necessary before laying the tile. It is important that plumbing communications do not interfere with the deepening of the box.

Outdoor installation, as a rule, is chosen in the case of too closely the location of the pipes to the impeller. In this case, the box is installed directly on the tile. The disadvantage of this method is to reduce the size of the opening by the size of the box. Installation of the mustache is used for thin bases, such as plasterboard sheets. The box is also located outside, an additional bottom profile is installed when installed. Fastening to the ceiling in this case is not required, it is put in the upper guides, which ensures reliability of the structure.

To connect plumbing devices to the water supply network used flexible water lining. It is in demand when connecting mixers, shower cabins, toilet bowls and other points of water intake, and significantly simplifies the installation process. Flexible lining is also used when installing gas equipment. It differs from similar water tools for manufacturing technology and special safety requirements.

Characteristics and species

A flexible supply for connecting plumbing is a hose of different lengths made of non-toxic synthetic rubber. Due to the elasticity and softness of the material, it easily takes the right position and allows you to install in hard-to-reach places. To protect the flexible hose, the upper reinforcing layer is intended as a braid, which is performed from the following materials:

• Aluminum. Such models are withstanding no more than +80 ° C and retain functionality for 3 years. With increased humidity, the aluminum braid is prone to the appearance of rust.
• Of stainless steel. Thanks to this reinforcing layer, the service life of flexible water supply for water is at least 10 years, and the maximum temperature of the transported medium is +95 ° C.
• Nylon. Such a braid is used to make reinforced models that hold the temperature to +110 ° C and are designed for intensive operation for 15 years.

A pair of nut-nut and nut-fitting, which are made of brass or stainless steel are used as fasteners. The devices with different indicators of the permissible temperature differ in the color of the braid. Blue is used to connect to a pipe with cold water, and red - with hot.

When choosing a watering for water, you need to pay attention to its elasticity, fastening and destination. Mandatory is also the presence of a certificate that eliminates the separation of rubber toxic components during operation.

Features of gas supply

When connecting gas stoves, columns and other types of equipment also use flexible liners. Unlike models for water, they have yellow and not tested for environmental safety. For fixing uses end steel or aluminum fittings. Distinguish the following types of fixtures for connecting gas appliances:

• pVC hoses that are reinforced with polyester thread;
• from synthetic rubber with stainless steel braid;
• silphon, made in the form of a corrugated stainless steel tube.

Holding "Santekhkomplekt" offers engineering equipment, reinforcement, plumbing and fixtures for its connection to communications. The range is represented by products and materials of famous foreign and domestic manufacturers. With wholesale purchases, discounts apply, and product quality is confirmed by certificates of the established sample. For information support and assistance for each client, a personal manager is assigned. The possibility of making delivery within Moscow and to other regions of the Russian Federation allows you to quickly get purchased goods without unnecessary trouble.

Drainage - a hydro-elevative event on the disposal of excess groundwater.

If you do not leave the water from the territory for a long time, the soil is flunk, if they quickly disappear (swell) shrubs and trees, it is necessary to urgently take measures and carry out the drainage of the site.

Causes of soil moistening

The reasons for the convergence of soils several:

• clay heavy soil structure with weak water permeability;
• the waterproof in the form of gray-green and red-brown clays is located close to the surface;
• high groundwater occurrence;
• man-made factors (construction of roads, pipelines, various objects), which prevent natural drainage;
• violation of water balance with the construction of irrigation systems;
• landscape plot is located in a lowland, beam, hollow. In this case, atmospheric precipitation and water inflows are playing a major role.

What is fraught with excess moisture in the soil

The results of this phenomenon you see yourself - trees and shrubs die. Why is this happening?

• the oxygen content is reduced in the soil and the carbon dioxide content increases, which leads to a violation of the processes of air exchange, water regime and power mode in the soil;
• there is an oxygen fasting of the root-forming layer, which leads to the dying of the roots of plants;
• violates the receipt of macro and microelements by plants (nitrogen, phosphorus, potassium, etc.), because Excessive water flushes mobile forms of elements from the soil, and they become inaccessible to assimilate;
• an intensive decay of proteins occurs and, accordingly, the processes of rotting are activated.

Plants can suggest at what level groundwater

Look carefully to the flora of your site. Inhabiting its views will be prompted, at what depth there are soil layers of water:

• ripowodka - in this place is best to dig up with water;
• at a depth of 0.5 m - the bow of the village, the chests, varieties of the Oskock - bubble, ostolic, foxes, Vainik Langesdorf;
• at a depth of 0.5 m to 1 m - Tollga, Canary,;
• from 1 m to 1.5 m - favorable conditions for taming meadow, mint, mouse peas, ranks;
• from 1.5 m - drink, clover, wormwood, plantain.

What is important to know, planning the drainage of the site

Each group of plants has its own moisture needs:

• with a depth of groundwater from 0.5 to 1 m can grow vegetables and aluminum flowers at high beds;
• the depth of the water reservoir to 1.5 m is well transferred to vegetable crops, grains, annual and perennials (flowers), decorative and fruit-berry shrubs, trees on dwarf dive;
• if groundwater at a depth of more than 2 m, you can grow fruit trees;
• the optimal depth of groundwater grounds for agriculture is from 3.5 m.

Whether the drainage is needed

Record your observations at least for a while. You will be able to understand how much drainage is needed.

Maybe it makes sense to simply redirect the tale and sedimentary waters along the bypass channel, and not allow them to flow through their plot?

Perhaps you need to design and equip the lavety and improve the composition of the soil and will it be enough?

Or is it worth making a drainage system only for fruit and decorative trees?

The exact answer will give you a specialist, to call which we strongly recommend. But after reading this article, you will gain some awareness in this matter.

At the end of the technological and production tasks associated with the arrangement of the sewer system in an apartment building, a production building, as well as in private home ownership, it is required to experience the system involved by the method of forced strait. This task is applied to identify possible defects or improper installation of the entire sewed sewage unit and the act of testing of internal sewage systems and drainage systems will be a real proof of work on the reception of the object.

Visual check should be accompanied by the test of the internal sewage and drainage systems in the ACT, which is currently submitted by the current regulations of the application of the "D" series, which corresponds to the joint venture 73.13330.2012 "Domestic Sanitary and Technical Systems of the Building" has recently applicable new Actualized working edition of SNiP 3.05.01-85.