Many owners of country sites and country houses often face problems in the heating system of their seasonal housing. For such buildings, it is recommended to use brick furnaces. But such a heating construction has a number of serious flaws. Quickly heating the living structure in which it does not constantly live, a rather difficult task. Gas stoves - an alternative for the heating of a country house and cottages.

Design features

Such devices in their design are practically no different from gas boilers.

The main feature is the operation method. Gas furnace does not connect to pipelines. This is a convenient home or cottage heating system that allows you to quickly warm the room. Liquid heat carrier frozen in it will not be able.

Devices operate on a trunk or balloon gas. The design of the furnace has a housing, a fuel, a burner, a heating shield, automation (fuel failure system).

The device designed for functioning with liquefied gas can be used for heating a small house (single or two-storey). For heating large areas (more than 60 m2), gas operating furnaces are not suitable.

Such heating structures can work in continuous or temporary mode.

This device is one of the most important elements of a similar heating system. At the burners used in gas furnaces, various fuel consumption. For heating a small house or cottage, a device that consists no more than 4 m3 / h can be used.

Burner - element replaceable. It can be purchased and installed separately. The detail of the required power is selected and mounted in the existing furnace. At the same time, it is necessary to pay attention to the fact that the size of the threaded connection of the burner and the source of fuel supply to the heating device has coincide. The size of the mounting window for this element is 40-55 cm.

All gas stoves for heating housing necessarily have certificates confirming their compliance with the State Standard of Security and Quality. If there is no such documentation, then it is better not to acquire such goods.

The walls of the fuel cell are heated due to the combustion of the fuel. Air, to maintain the combustion process, is supplied through pushed.

At the top of the heating device, the chimney is located (combustion products come out), it joins the fuel.

Benefits

Gas furnace used for heating a country house or cottage is an effective heating system. Due to the peculiarities of the fuel material used and the functioning nuances, they have gained wide popularity. To their undoubted advantages include the following:

• durability, reliability (in fact, there is nothing to break in such a heating device, the warranty period of their operation is 12 years, but it actually serves a gas furnace much longer);
• environmental safety (devices that use gas for heating will not harm both the environment, in contrast to solid fuel boilers, they do not allocate toxins in the process, can be used at any time of the day and year);
• Efficiency at a high level;
• ergonomics (gas consumption is 133 g / h, in areas with a trunk gas carried out even lower);
• saving places (unlike firewood, gas does not need a separate storage room, it is not required to deliver it, you can fill the balloon on any gas station);
• easy operation (furnaces are connected to a trunk pipeline or to a conventional gas cylinder and provide comfortable conditions for living).

disadvantages

Gas furnaces are not devoid of flaws. Equipment itself and its installation is not at all cheap. Natural gas - although the most inexpensive fuel, but its value in our country is systematically increasing.

Gas furnaces are quite difficult to install and connect. In the case of even the smallest mistake itself, you can face huge problems in the use of such devices (they will not do what they are intended, or will begin to represent the danger to life and health of residents).

Mounting and use nuances

When installing gas equipment at home or in the country, it is necessary to consider a number of requirements for it.

Often, not one, and two devices are connected to heating private housing to chimney. If two gas units are connected, they are located at different levels relative to each other. The distance between them should be at least 0.5 m. In the chimney it is necessary to make a lash if the heating devices are still solved on the same level.

This design can be in the form of a cylinder, oval, in some cases even a square. But in the last option, you can face the problem of poor-quality traction.

The pipe of the gas furnace should be the same or smaller cross section as the chimney canal. If several heating devices are connected, the cross section is determined using special calculations. At the same time take into account that the aggregates can work simultaneously.

The chimney pipe must be protected from excess condensate. For this inside it, the structure of stainless steel is mounted. Set the chimney is necessary strictly vertically. At the same time there should be no ledges.

Installation

It is required to withstand a certain distance between the wall and the furnace: it must be at least 5 m.

The heating device must be put on a non-combustible firm base, the dimensions of which must exceed the parameters of the furnace by 10 cm on each side.

Absolutely forbidden

It is impossible to create chimney from materials having a porous structure. It is also forbidden to carry out a pipe through the premises with poor-quality ventilation.

Criterias of choice

When buying a gas furnace for heating a country house, cottages, baths, a garage, you need to pay attention to the following:

• the size of the unit, its compliance of the parameters of the structure, which it will have to damn;
• the presence of an automatic system for turning off the fuel supply, thermostat and gas fuse (the last two will require a small overpayment, but during the operation of the gas furnace will be saved);
• the possibility of functioning of the gas burner on the main and liquefied gas;
• certification of equipment.

Manufacturers

Gas furnaces of Russian production ("Teplodar", "Rus", "Troika", "Thermophore") have good reviews. They are high-quality and presented in the domestic market in a wide range. They have a nice design, steel furnace, door made of metal or heat-resistant glass. Such aggregates are characterized by high characteristics, simplicity and unpretentiousness in use. Some models are equipped with special valves allowing to adjust the temperature.

Gas furnace for the heating of cottages, a private house - a profitable and practical option. If you wish, it can be collected with your own hands, but in case of an exposure, such a device can lead to a leakage of fuel material and an explosion. Therefore, self-esteem is very important.

In everyday bustle, we pay very little time to monitor the household equipment market, and in vain. Agree, recently has many devices that have the ability to save resources and make more energy.

Gas is the cheapest Russian fuel, respectively, gas heaters look much more attractive than electrical or solid fuel counterparts. And if you are a happy owner of housing removed from the central gas highway, the gas heater for the cottage on the balloon gas is one of the best options for the operational creation of a comfortable environment in the house.

We offer an overview of the top instruments, each of which is good and beneficial in its own way. We analyzed the appointment, functions, technical characteristics of heating devices, and you remain, taking into account expert recommendations, choose the most suitable heater.

High price segment

Budget price segment

Ballu BIGH-3

Excellent balance price and quality with high efficiency

Infrared Chinese-made heater with Dutch roots rose first thanks to excellent assembly, efficiency and efficiency. This is one of the rare options for heating equipment, whose efficiency is 100%.

The model is designed for housing heating, as well as household needs, so very popular with summer residents. It can be used for heating greenhouses, garages, subsidies, private farms.

The compactness of the IR instrument rated fishermen and hunters, tourists and picnic lovers. The heater does not lose functionality in high humidity conditions, suitable for heating or fast food.

The emitter is fixed on high steel legs that exclude overturning and allowing it not only on an even horizontal surface, but also in the grass, on uneven or rocky soil.

Specifications:

• type - Tile;
• power - 3 kW;
• heating area - 30 m²;
• fuel consumption - 0.2 kg / h;
• reducer - there;
• bolon - no;
• the hose is;
• dimensions (d / w / c) - 115/225/211 mm;
• weight - 1.6 kg.

No power connection is required, the tile works on cylinders with propane / butane. Due to infrared radiation, the heat is evenly distributed over the surface of the objects located nearby. The heating element is protected by steel grid.

Dignity

• High efficiency
• Simple design
• Reliable assembly
• Strong ceramic panel

disadvantages

• Short hose.
• Caustic

Hyundai H-HG2-29-UI686

Budget version from the discharge of hiking for heating and heating of food

The inexpensive heater is designed to heat the premises of various purposes: agricultural buildings, greenhouses, terraces, open construction and industrial sites, cells. The manufacturer specifies that the device is suitable for non-residential premises, and it is possible to use it for the heating of cottages only temporarily.

The basis of functioning is the combustion of the gaseous mixture in the burner, followed by the release of IR radiation.

One of the main advantages of the device is compactness. As part of the ceramic emitter asbestos is not contained. Thanks to the stand, it can operate in two positions: vertically, with an angle of inclination to 60 °, and horizontally, with an emitting plane directed upward. The second position is used to warm or cooking.

Specifications:

• type - Tile;
• power - 2.9 kW;
• heating area - 28 m²;
• fuel consumption - 0.29 kg / h;
• reducer - there;
• bolon - no;
• the hose is;
• dimensions (d / w / c) - 145/314/214 mm;
• weight - 2.5 kg.

The tile does not require a power connection, running on a balloon propane and is completely controlled manually. Despite the compact dimensions, it works efficiently and quickly heats the room.

Dignity

• Compactness and low weight
• Simple management
• Small gas consumption
• Low price

disadvantages

• Poor-quality assembly
• Gas smell when turned on

Ballu BIGH-4

Economical heater for aimedal action

Universal device working without connecting to power supply. It is used to heat the local areas in open areas, where traditional heaters are ineffective. In residential premises, the device is recommended to include for a short time. Suitable for heating greenhouses, garages, utility rooms, houses during construction.

The ceramic factory manufacturing panel passes a special test for the presence of chips and cracks, is protected from above with steel grille. When transporting, the detachable leg is disassembled and folded, which allows you to make the packaging more compact.

The tile is equipped with a gas control system. The sensitive thermocouple reacts to a sudden flame attenuation and blocks gas flow to the burner. One of the advantages is silent work.

Specifications:

• type - Tile;
• power - 3-4.5 kW;
• heating area - 45 m²;
• fuel consumption - 0.32 kg / h;
• reducer - there;
• the balloon is;
• the hose is;
• dimensions (d / w / c) - 278/338/372 mm;
• weight - 2.3 kg.

The gas tile works on 50-liter cylinders with propane / butane, from which you can calculate in advance. Due to the functioning of the IR surface, it is not heated by air, but the surrounding items.

Dignity

• Excellent heating quality
• Does not require power
• Heat-resistant ceramics
• Stable leg

disadvantages

• Hard short hose
• Weak plastic valve

Hyundai H-HG3-25-UI777

Inexpensive model of universal type for houses and open areas

Budget portable tile - a portable option for heating and cooking. Designed for use in residential premises and outdoor sites, greenhouses and counters. Equipped with comfortable legs changing position, and grill grill.

Heating effect increases due to the infrared reflector: the gas burns on the surface of the burner, the energy spreads around. At the same time, it is weakly heats up air, giving heat to surrounding objects.

Simple design and mechanical management make the device simple and understandable, rarely failing. In the ceramic emitter dangerous substances such as asbestos are not contained.

Specifications:

• type - Tile;
• power - 2.5 kW;
• heating area - 20-40 m²;
• fuel consumption - 0.22 kg / h;
• reducer - no;
• bolon - no;
• hose - no;
• dimensions (d / sh / c) - 145/225/125 mm;
• weight - 1 kg.

The tile is running from the cylinder with a gas mixture of propane / butane, no connections for electricity does not require. The ceramic burner is reliable, designed for a long service life.

Dignity

• Small sizes and weight
• Understanding management
• Grill grill included
• Main gas nozzle

disadvantages

• Splits paint
• No lattice locks
• There is no gearbox included

Middle price segment

Elekon POWER PG7B.

Mobile stove for small rooms

South Korean novelty on the Russian market, a compact portable heater in a secure case with a comfortable handle. Designed for heating hiking tents, temporary structures, but it has proven itself well and as an offseason heater for country houses, workshops, garages, small warehouses. It is often acquired for local workplace heating.

Autonomous furnace to use, does not require connection to electricity. Night comes from the piezo element, which is triggered even in a humid environment. The efficiency of heat transfer is increased by a microporous ceramic emitter, fuel combusts completely.

The metal plate on which the gas cylinder is placed in the process of operation and improves gas evaporation. There is a built-in pressure regulator.

Specifications:

• type - furnace;
• power - 2 kW;
• heating area - 8 m²;
• fuel consumption - 0.15 kg / h;
• reducer - built-in;
• bolon - no;
• hose - no;
• dimensions (d / sh / c) - 189/376/377 mm;
• weight - 3.9 kg.

The device operates from domestic collens with liquefied gas volume of 220 gr. The principle of infrared heating is valid, that is, it warms not the air, but the surface nearby.

Dignity

• Simple design
• Mechanical management
• Excessive pressure valve

disadvantages

• A small area of \u200b\u200bheating
• No gas cylinder included

KOVEA POWER SENSE (KH-2006)

Compact and lightweight IR Heater

The lightweight version of Power Sense is designed for heating small country houses, garages, utility buildings, workshops. The compact device is convenient for carrying, so it is often acquired for tourist hiking, hunting or fishing.

The main source of heat is a tungsten emitter. There are no plastic elements in the inner design of the heater, so with time it is not deformed and does not lose functionality. The housing is made of aluminum and covered with moisture-resistant paint.

The device is equipped with a piezorozhig, thanks to which the flame flashes when turning the fuel handle. Useful additions - a plate of heating a canister and an overpressure valve.

Specifications:

• type - furnace;
• power - 1.04 kW;
• the heating area is 10 m²;
• fuel consumption - 0.08 kg / h;
• reducer - no;
• bolon - no;
• hose - no;
• dimensions (d / w / c) - 254/226/242 mm;
• weight - 1.4 kg.

The furnace operates from small marching gas cylinders, which are inserted inside the housing, into a special niche under the rear lid. If the maximum filled cylinder is used, then the heating time of the 10-meter tent will take about 3 hours.

Dignity

• Compactness and light weight
• Economical fuel consumption
• Stable housing

disadvantages

• Heats up the lower part
• No adapter on a household balloon

ELITECH TP \u200b\u200b4GI

Triple-mode furnace-fireplace for giving

Effective heater for use in country buildings: greenhouses, garages, workshops, subsidies. It is often acquired for production use, for the heating of warehouses. The fireplace type stove works in 3 modes. Depending on the conditions, you can set the power of 1.4 / 2.8 / 4.1 kW.

All major elements are made of metal, covered with heat-resistant moisture resistant paint. Heating elements are enclosed in a robust housing, equipped with 4 wheels for convenient movement of the device.

The unit is equipped with a thermocouple controlling the flow or blocking of gas, an oxygen sensor and a gearbox, which increases the level of safety and allows the use of a heater for residential premises - but for a short time and under the condition of well-established ventilation.

Specifications:

• type - furnace;
• power - 1.4-4.1 kW;
• heating area - 41 m²;
• fuel consumption - 0.29 kg / h;
• reducer - there;
• bolon - no;
• the hose is;
• dimensions (d / w / c) - 220/420/730 mm;
• weight - 9.3 kg.

The furnace operates on gas household cylinders with propane various volume, while tanks up to 27 liters can be inserted inside the housing.

Dignity

• Fast and efficient heating
• High degree of security
• Economical fuel consumption

disadvantages

• Thin metal case
• Plastic wheels are erased
• Possible factory marriage

PRORAB GRH 4.

Triple-mode device for country applications

In contrast to budget models, the PRORAB gas ceramic heater is made in the form of a fireplace. The housing is made of high-strength metal and for convenient movement is equipped with four wheels. The device is intended for heating workshops, garages, warehouses, country houses.

The ceramic panel consists of 4 plates that are heated one after the other and allow you to adjust the heat selection. The effectiveness of heating increases due to: not the air heats up, but the surrounding items that stabilizes the temperature indoors.

The heater is equipped with gas control system, which overlaps the flow of fuel in case of random flame attenuation. The CO2 sensor blocks the operation of the device if the concentration of carbon dioxide in the air exceeds 1.5%.

Convenient three-stage power adjustment allows you to turn on the device in economy mode.

Specifications:

• type - furnace;
• power - 1.3-4.2 kW;
• heating area - 60 m²;
• fuel consumption - 0.3 kg / h;
• reducer - there;
• bolon - no;
• the hose is;
• dimensions (d / w / c) - 290/430/730 mm;
• weight - 9.3 kg.

The fireplace operates on a bottle gas propane / butane, can be connected to it with a capacity of 5 to 50 liters. Cylinders up to 27 liters can be inserted inside the housing by attaching through the gearbox.

Dignity

• Effective heating in winter
• IR Heating - on 5 points
• Convenient control on the housing

disadvantages

• Gas smell when you first start
• During operation produces noises
• No cylinder included

High price segment

Kovea Little Sun (KH-0203)

Compact Secure Tourist Model

A small Korean heater is more suitable for hiking conditions - the heating of the tent or the local area outdoors. But some users successfully apply it to create comfortable conditions in the country house, garage, greenhouse or workshop - places where there is no heating capability to another way.

In the design of the device - a safe ceramic emitter with a protective grille, a metal plate for heating the gas spray, as well as an overpressure valve that blocks the flow of gas in the violation of the operating parameters.

For ease of carrying, the housing is equipped with a plastic handle. The mechanical switch is mounted on the top of the housing panel, in the rear, under the lid - the compartment for the canister.

Specifications:

• type - furnace;
• power - 1.67 kW;
• heating area - 15 m²;
• fuel consumption - 0.12 kg / h;
• reducer - built-in;
• bolon - no;
• hose - no;
• dimensions (d / w / c) - 277/191/343 mm;
• weight - 2.1 kg.

The heating device works from cylinders with a gas-type gas, gas burning time from 1 cylinder - 4-5 hours. The manufacturer claims that one canister is enough for the night, and recommends to warm the room at maximum power, and then translate the device to economical mode.

Dignity

• Easy and compact
• Durable plastic housing
• Quick launch
• Power adjustment

disadvantages

• There is a smell of gas
• No carrying case

TIMBERK TGH 4200 SM1

Powerful heater for spacious premises

One of the most popular models on the market among dachensors is an efficient and safe heating device in a solid housing. Designed for heating large rooms - up to 60 m². Adjusting the capacity allows it to be used both on spacious squares - in warehouses and hangars and in small rooms, for example, country houses under construction or garages.

Unlike aggregates with the same design, the model TGH 4200 SM1 has a small size and lighter weight. For convenient transportation wheels are installed.

The device is characterized by good heat transfer. For example, it is able to increase the temperature of 10 degrees for half an hour in a 20-meter garage. To turn on, it is enough to rotate the handle and click on the Piezorozaga button. With a random drop or high concentration of carbon dioxide in the air, the device is turned off.

Specifications:

• type - furnace;
• power - 1.4-4.2 kW;
• heating area - 30-60 m²;
• fuel consumption - 0.31 kg / h;
• reducer - there;
• bolon - no;
• the hose is;
• dimensions (d / w / c) - 380/295/550 mm;
• weight - 6.3 kg.

The furnace works from cylinders with, which are securely fixed in the housing. The most successful option is the 5-liter containers, but are approached by 12 liters and cylinders if installed under the tilt.

Dignity

• Fast and powerful heating
• Gas control system
• Compact housing

disadvantages

• Heats up very much
• Short hose.
• The smell of Gaza is possible

Ballu big-55

Highly efficient heater of the Russian assembly

The popular appliance is tested for gas leakage in the manufacturer's laboratory, as a result of which the minimum number of devices with a factory marriage fall into the market. Designed for both the heating of open areas - construction sites, restaurant and hotel courtyards, and for heating country houses in the off-season.

Fast HEAT advanced development allows you to use double heating technology: infrared and convective. The heating front panel is made of high-grade ceramics of class A, does not have chips and cracks. For convection, holes are provided at the top of the case.

Towing is made using reinforced chassis. The control unit is disguised in the top of the case. Externally, the device looks, compared to similar heaters, is very worthy and stylish. Like all Ballu brand heaters, has a warranty period of 12 months and is designed for 5 years of use.

Specifications:

• type - furnace;
• power - 1,55-4.2 kW;
• heating area - 60 m²;
• fuel consumption - 0.3 kg / h;
• reducer - there;
• bolon - no;
• the hose is;
• dimensions (d / w / c) - 360/420/720 mm;
• weight - 8.4 kg.

The heater works on the cylinders of propane-butane. For mounting cylinders up to 27 liters in the rear of the device there is a special niche.

Dignity

• Stylish and powerful at the same time
• Quickly heats the room
• Defined security system
• Reliable assembly

disadvantages

• Increased gas consumption
• Reducer makes noise
• Problems with the first launch

BARTOLINI PULLOVER I TURBO PLUS

Powerful model with thermal fist

IR Gas heater is designed for any economic and household buildings: garages, warehouses, satisters, workshops. As a temporary heating device, it can be used in residential country rooms, but with good ventilation.

Heating elements - ceramic panels - enclosed inside the metal case and transmit heat in the infrared spectrum. The design of the panels involves the maximum combustion of gas, and at the same time the absence of odor and hazardous substances in the air. To increase power provided heaterFed from electricity.

Turning off the unit is triggered when the concentration of carbon dioxide is exceeded by more than 1.5%, sharp increase in the flame level. It is impossible to call a compact or light heater, but it is easy to move it at the expense of wheels, firmly fixed on the bottom of the bottom.

Specifications:

• type - furnace;
• power - 1.4-4.2 kW;
• heating area - 100 m²;
• fuel consumption - 0.33 kg / h;
• reducer - there;
• bolon - no;
• the hose is;
• dimensions (d / w / c) - 430/420/780 mm;
• weight - 13 kg.

The heater works on propane-butane. In the back of the housing there is a notch for the installation of 27-liter Russian-made cylinders. In order to additional protection from above, the balloon is closed by a casing.

Dignity

• The cover does not heat up
• Thoughtful security system
• Reliable Italian gearbox
• Thermal fan with adjustment

disadvantages

• Possible factory marriage
• Gas smell during ignition

Unlike complex household appliances such as a washing machine with a variety of operating modes, for the successful choice of a household gas heater with a garage or garage cylinder, several important criteria should be taken into account. They relate to the appearance, characteristics, main functions, degree of security and convenience.

For home or other indoors, try to choose a heater with a housing that does not heat up, and the maximum degree of safety - protection against leaks and ignitions

For open areas, powerful aggregates are suitable in the housings, reliably protect the burner from attenuation, and other internal elements - from garbage and dust.

The criteria listed below should also be considered depending on the installation site and the specific needs of the user.

Gallery of images

Every year, daccias are asked about the insulation of their house, because in addition to warm summer there is rainy autumn and spring, and some people love to rest in nature at all in winter. Therefore, the gas furnace for giving heating will be simply necessary.

Types of gas furnaces

But before buying a gas stove with a cylinder, it is necessary to understand their diversity and understand which one is suitable for you.

A gas furnace is a solid factory structure in a metal case, all its characteristics should be calculated, taking into account the project of the house and the end targets of use.

Solving gas stoves a great set, their varieties and features will be disassembled in order.

1. According to the method of generating heat:

• the presence of combustion chamber,
• the presence of heat exchanger
• for periodic use
• for permanent use.

1. By heat capacity furnace:

A modern gas furnace for giving with a cylinder is not much different from its predecessors - wood stoves. The principle of operation is still based on air circulation indoors and heating.

Ways to generate heat in a gas furnace.

The difference in the method of generation of heat is as follows: in the presence of a heat exchanger (curved metal heat-resistant pipe, which has the type of heater and performs its functions) the surrounding air warms up next to it, in the other case the wall of the combustion chamber is heated, and through the holes warm air heats the outer casing through the holes. Furnaces and surrounding space. In fact, the methods are similar and the furnace with the combustion chamber in its simplicity, and accordingly, the cheapness will suit a greater contingent.

The heat capacity of the country furnace.

The heat capacity of the furnace depends entirely on the needs of the consumer. If a person does not need constant heating and uses the oven from time to time (relevant for those who come to the cottage and experiences the need for operational ignition and cooler of the furnace). For such people, the furnaces of periodic furnaces are suitable, as they have thin walls, then the heating of the air, as well as the cooling of the gas furnace itself will occur at times faster. The name for the "permanent" use of this type of furnace received for the fact that it is necessary to constantly maintain fire in the combustion chamber to save the desired temperature.

Ovens of periodic distillers are used for permanent residence or for a bath, because they do not require constant fuel supply and remain warm. Such furnaces are folded with clay bricks, they make air pockets, such a furnace is conveniently decorated with a fireplace that will delight the eyes with cold evenings. Before you choose your choice on one of the types of gas oven for your cottage, you can see the reviews for each of its types.

Selection of gas burner for heating system

The slide is the basis of any gas furnace, the efficiency will depend on it (more simply, how much heat is distinguished for a certain period of time). Functionality furnace, room heating, safety and efficiency. The installation of the heating burner is made, as a rule, from the front side, where the door is usually located near the wood furnace. The burners themselves are divided:

1. Various levels of thermal power control:

• Single-stage - it is possible only to enable and turn off the fuel supply.
• Two-stage - can switch between the usual mode (single-stage) and economical (50-40% fuel supply).

• Crab adjustment - the ability to fully adjust the fuel supply from 10 to 100%.
• Air joker occurs under the action of thrust without the help of electrics.
• With the help of electricity - the fan, or the air pump is withdrawing air. Plus is an increased efficiency. Of minuses depends on constant power supply.
• Electrogen, its dignity is the lack of constantly burning, but since it is directly dependent on electricity, it may not be suitable for all users.
• Piezorozhig. It has one big advantage, namely the constant connection of the power grid.

1. The method of supplying air to the burner is also distinguished:

1. For convenience, two ways of ignition gas furnace are invented:

In order for the heating system of a gas furnace to work more effectively, you can use the flame distributor. Since the installation of gas equipment is an occupation with an increased risk for life, in this case, be sure to contact a specialist. In the question of the final choice of gas burner, you can refer to the reviews of experienced users who fully reveal all the parties to this issue.

Final selection of the type of gas oven with a cylinder for its cottage.

First of all, you need to think about functionality and efficiency. Of course, a gas ceramic furnace for giving, the Italian fireplace or infrared furnace will look beautiful and cause admiration for both the owners themselves and their guests. You can see this photo. However, it is worth remembering that in the first place in this question should be functionality so, for example, an infrared oven or an Italian fireplace is heated with a smaller area (it has a small efficiency).

The furnace finished marble or under the fireplace looks quite beautiful, but also requires more careful care. The gas heating furnace for the cottage primarily simplifies the process of heating the room, because in order to warm the house with a conventional wood-burning furnace, it is necessary to have the recent recent and a certain time on the extract. But it is not necessary to forget that if the house is not gasified, then it will be necessary to monitor the amount of gas in the cylinder and regularly replenish it. It is also necessary to take a safe place for the balloon itself.

Reviews about Gas furnaces for giving will help you decide not only with components for your oven, but also help to build an objective picture during the operation of each type. Again, from other users you can find out where it is better to purchase this product. Gas heating furnace for giving will help you on the other hand, look at gardening and pastime in the fresh air in the rainy and winter season. And this video will help you make a final solution.

How used for heating household gas burners

By ensuring reliable heating of the premises, it is possible in winter it is not worried about the temperature in the premises. First of all, it is necessary to choose the pipe layout scheme and decide on the type of boiler, the most common of which are gas.

It is important to solve how much contour it is preferable to have what type of combustion chamber will be. And one of the determining factors affecting the choice will be the selection of a gas burner, which is the heart of any domestic heating. It is it that determines the operational and environmental qualities of the heating device.

Appointment and requirements

In order to ensure the continuous combustion process, the gas must be mixed with oxygen. The burner is an equipment in which gas is fed, mixed with atmospheric air, lights up and burning, providing a uniform distribution of the flame.

Heating gas burner

For the normal functioning of the device, certain requirements must be implemented in it:

• Sufficient gas saturation with oxygen;
• Completeness of the combustion of the resulting mixture at various loads;
• Heated to ignition temperature and reliable fire, obtained using electrical or piezojagal;
• Good assembly and operational qualities that ensure reliable and long-term work;
• Silent work and lack of vibrations;
• The minimum amount of toxic emissions during combustion.

Infrared heating

For heating residential cottages and various utility rooms, gas burners, producing heating due to infrared rays, can be used. More powerful devices are installed in homes, garages or sheds. Economical compact devices are suitable for small tents or awning. Heating occurs due to infrared radiation of mounted metal or ceramic plates, hot when burning gas.

Principle of heating

A feature of such burners is that heating is aimed at the items located in the room, the walls, the floor, and the air is heated by secondary heat, from the heated items. Such devices allow you to dampen the entire room or a certain zone on which the radiation is sent. Equally effective will be heated open areas, sidewalks or buildings.

Bulk burner.

Heating is performed almost instantly and has no inertia. After switching on, the feeling of comfort comes, which allows the use of devices a few hours a day.

The greater efficiency of infrared devices is due to the fact that under the action of human skin, infrared rays cause improved blood circulation, so that it is possible to maintain a room in a room for 1-2 degrees to the creation of comfortable conditions with a lower heating.

Design

Any gas burner should consist of such main parts:

Household gas burners

• gas supply points;
• branched gas pipelines allowing the connection of devices at various location points;
• fuel accounting node, shut-off valve;
• burner;
• automation. Providing ignition and management.

Such devices are equally effective, working on natural and liquefied gas. To change the fuel type, it is enough to change the nozzle and switch the feed gas pipeline.

In rooms where it is not rational to ensure the permanent presence of people controlling the work of the device, it is necessary to automate it as much as possible and be sure to establish a gas supply system if the flame goes out.

Gas furnace for giving with a cylinder

When heating gas burners to regulate heat transfer, an increase or decrease in the number of enabled devices is used.

What should be considered when calculating the heating system?

First you need to determine which area will be heated using stationary gas burners. At the same time, it should be borne in mind that the intensity of irradiation for humans depends on the temperature indoors. These values \u200b\u200bare determined by experimental means, calculated by the formulas and are listed in the table.

The dependence of the permissible range of IR radiation from temperature

According to the site: http://uteplenievdome.ru

Garden heating with gas cylinders using convectors and boilers, advantages and efficiency

Cottage ... Someone this word is associated with physical work, someone has a vacation and a great place to travel. But in any case, in front of the hosts of a country building sooner or later, a solution arises regarding the creation of comfortable climatic conditions in the cold season. The stoves are increasingly remained in the last century, but the dacha heating is a gas cylinder, a boiler or convector, are becoming increasingly popular.

Gas is a powerful energy carrier, which has been and remains the most relevant and efficient energy resource.

In the arrangement of gas heating in the country, you can use:

• boiler;
• cylinders;
• convectors.

A gas boiler

The laid gas highway allows you to create a heating system with a boiler. In this case, it is important to determine the power of the aggregate itself. Approximately 1.7 kW of power is necessary on heating 1 kV. m of the room (this is with a margin). With a cottage area of \u200b\u200b30 square meters. m cope gas boiler in 51 kW.

Boilers are found outdoor and wall.

Gas heater for cottage

Outdoor are more suitable for large cottages with frequent attendance, they do not depend on electricity, but occupy a lot of territory and require additional equipment. Wall units are compact, convenient to operate, almost all the models are dual-circuit (parallel with domestic water), but have low durability.

Gas heating of cottages with the help of a boiler requires a boiler construction (Fig. 1). It is not necessary to build a separate building for this, part of some kind of cottage room can be used.

For autonomous heating, dacha need to be needed:

• pipes under the coolant;
• radiators;
• chimney;
• pump for water circulation and others.

Advantages of this heating system:

• offline work;
• simple use;
• saving;
• stable fuel pressure.

Gas cylinders at the cottage and boiler

Many territories, including the country, are far from gas highways. Gas cylinders are a good option to create a thermal system in the house.

The whole system is quite complicated and includes:

• boiler;
• cylinders;
• burner for reduced gas;
• pipe fittings;
• gas pipeline.

The choice of the boiler is carried out in the same way as in the case of the gas highway.

But there are three important differences in the choice of the boiler:

• the implementation of the replacement of the "native" burner to the one that works on a reduced gas cylinders;
• select low pressure unit to obtain high gas use from cylinders;
• the maximum high efficiency (in the case of the use of the highway is not so important).

It is advisable to attach several cylinders to the boiler to less often "mess around". Gas heating with cylinders in the country requires adhere to special security measures: it is important to establish them in some kind of warm building, but not in the basement. If you install cylinders on the street - the fuel pressure will decrease, which will turn off the work of the boiler burner. And if you install in the basement or near residential rooms, then the dangers lie in a possible leakage of fuel and consequences.

Storage of gas cylinders in the country should be carried out in a separate room (Fig. 2), where there is a ventilation system, and a smooth concrete floor.

Approximately, for 1 month, the dacha heating is needed 2 cylinders to an area of \u200b\u200b50 square meters. m., and for 100 square meters. M - 3 cylinders.

Gas convectors in the country

Gas convectors have a number of advantages regarding other heating devices (boiler, wiring, pump).

Benefits:

• energy savings;
• no additional equipment;
• simple installation;
• does not need electricity;
• does not burn oxygen.

The equipment works automatically, adhering to the desired heat temperature. This method of heating requires only control and replacement of gas cylinders.

In the metal heat exchanger of the design there is a chamber in which the incineration of reduced fuel occurs. Flood pipe outdoor combustion products. These instruments are often supplied with fans that contribute to the speedy heating of the premises. The gas convector (Fig. 3) can function from a gas highway or from cylinders on a reduced gas. The convector saves 50% of the energy carrier, in contrast to other similar heating systems.

Convectors are perfectly coped with the heating of a small area, each individual room implies the installation of the unit, which is not entirely economical in terms of installation. Among the heaters of temporary housing, convectors remain leaders due to safety, efficiency and low prices.

Heating for cottage without gas is possible using solid fuel boilers, furnaces, electricity, sun and wind energy, as well as geothermal heating. The choice is quite wide, so everyone has the opportunity to choose the best option for their capabilities and needs.

Articles on the topic:

Bartolini Gas Heaters Online Store

To warm up at the cottage in the cool time of the year, dry the house after a long lack and to ensure comfortable conditions for the cultivation of land on the site will help an economical gas heater. Depending on the purpose, the equipment has different modifications, power consumption and methods of exploitation. What are characterized, what features and advantages has a technique?

Gas heater for cottage

A catalytic gas heater is most often used in the country house. The feature of the device consists in free operation, although the fire is actually present.

Gas stove for giving under the balloon: the right choice and safe operation

But the power of the flame does not affect the efficiency of work. The popularity of the fireplace has won low fuel consumption and effective efficiency. The ceramic gas heater distributes heat to items due to the ceramic panel. The fireplace is equipped with 1-3 work modes. The principle of education and heat of heat is similar to outdoor technology. The difference in appearance, power.

Street gas heater

The task of street heaters is to provide it with warmth and things located nearby. So the gas infrared heater increases the temperature at 13C0-15C0 at a distance of 5 meters in diameter. It is convenient for use in the coolness of the day, the year, when the work on the site or the completion of construction will not tolerate delay. Indispensable during holidays outdoors. If necessary, install 2 or 3 structures. The device is adapted to operate in any weather - it is not afraid of rain, snow, wind. With careless use, for example, in the event of a fall, the protection system turns off the gas supply. The technique automatically turns off, without harming others.

Gas infrared burner

Compact, small-sized device - gas burner is used not only for garden heating, but also a garage, barn, greenhouses, etc. small rooms. Recovery when you need to finish finishing work in the house. Fans of winter fishing or hunting fell in love with a heater for low weight, efficiency, convenience during transportation and the ability to cook.
Many fittings are equipped with fuel leakage control system, which prevents odor and poisoning. This allows you to safely spend the night in tents. Depending on the tasks set, the gas cylinder is installed, the desired volume.

Gas convector

Gas convector - autonomous room heater. For normal operation requires the installation of an outdoor air intake. We also need to get out of exhaust gases. The technique is easily mounted (dismantled) to the wall and does not occupy the floor area. Effectively copes with heating even in frost.
In addition, inexpensive imported installations are distinguished:

• efficiency, if you compare with similar electrical options;
• compact;
• pleasant design;
• easy to manage.

Gas heater for cottages - the most convenient, economical means for safe operation and recreation.

The room temperature in the cold season is an important factor affecting the comfort of people's stay in it. At present, not in all non-residential and industrial buildings there is a centralized heating system.

Therefore, owners of warehouse and other unheated objects have to think about how to organize autonomous heating in them. Most often, for these purposes, various types of air heaters are used.

In many cases, the most optimal option is a gas gun for heating your home. According to some indicators, it has a number of advantages over other types of heat generators, which makes it use more rational.

1. Sphere of application of heaters
2. Criteria for choosing a reliable model
3. The advantages and advantages of gas units
4. Overview of the best models
5. Conclusion

Scope of equipment

Application area

Thermal gas guns are very often used in construction.

Without them, it is not necessary to do in cases where it requires strict adherence to certain climatic parameters when performing certain types of construction work, for example, concreting. Gas heaters are used for drying walls and floors when preparing platforms for further work after winter idle or after heavy and long precipitation.

With this equipment, heating large on the area of \u200b\u200bindustrial buildings and warehouses is carried out.

In the inner space of such objects, significant air flows are always observed, which makes the installation of conventional heating devices ineffective. But thermal guns are capable not only to quickly heat the air to the desired temperature, but also to hold it throughout the required time.

Equipment and to create a comfortable situation in spacious offices, on large areas of large shopping centers, in auto repair, garages, aircraft hangars, greenhouses. Thermal cannons are indispensable in those places where there is a problem with the conservation of heat in conventional ways. The main function of the devices is heating and technological drying.

What to pay attention to when choosing

Before purchasing a heat gun, you should decide on some points. First of all, it is necessary to solve which heater do you need: stationary or mobile? The first type of equipment requires a special installation with attracting work on the installation of professionally trained workers. Mobile installations can be operated by any person who got acquainted with the instructions for their work.

We watch video, aspects of equipment selection:

An important factor is the type of fuel used by the heater. Is the gas gun for heating the premises used in a particular case? It can be more effective to use a diesel or electrical heat gun. In some cases, a more advantageous option may be a device operating on spent oil.

Another question to which the answer should be given is whether the equipment will serve for complete heating of the room or only for the production of additional heat?

Experts argue that gas devices with the greatest efficiency and productivity have a capacity of 150 kW.

Features of thermal guns

This is powerful climatic equipment capable of quickly and efficiently dry large areas.

Furnace Gas LUX 4.2 kW

This type of technique allows you to install a comfortable temperature in the room. It does not require long preparation for it, immediately after switching on the device begins to supply heat. This feature is determining the high popularity of the use of devices.

Structural gas guns consist, like all heaters, from:

1. Hull;
2. Fan;
3. Heating element.

The difference is the high power of the fan. It is thanks to this factor that the equipment is so effectively copes with its task for an extremely short period of work. The fan very quickly drives the air through the heating elements and the outlet of the device turns out a powerful heat flux.

Another difference from the household heater is not plastic, but a metal case. This is due to the high temperature inside the heat gun. Plastic can melt. Especially since the device needs a durable shell to work in the open space.

Gas gun design

Some models have a thermostat or other control devices. Gas guns with such a system, the price of which is slightly higher than ordinary analogs, not only easy to operate, but differ in high levels of security. Due to the presence of control devices, you can adjust the air temperature and follow the heating of the aggregate itself.

It should be noted that the gas gun is not so mobile as other analogues, but it is not obliged to buy it at all.

In addition, the equipment is distinguished by significant efficiency and will solve the problem of heating in the premises, where there is no ordinary heating system.

There are devices on natural or liquefied gas, and the presence of highways is completely optional. Used as propane fuel or butane is sold in cylinders. The filling of the heat gun with liquefied gas can be carried out on a gas station. Electricity consumes very little, it is only needed for fan and thermostat. The complexity of the design fully corresponds to the cost of the device.

The disadvantage of the equipment is attached to the fuel source, which makes it less mobile.

Overview of popular products

Model brand ball

On the domestic market are the most popular products of brands:

• Rubbed;
• Sail;
• Tradechal;
• Master;
• Croll;
• Ball.

The price of device depends on its technical characteristics, including power and heating radius. Affects the cost and availability of control devices and the level of security. Brand's promotion also plays a role. If products from Russian manufacturers can be purchased for 4-5 thousand rubles, then the import analog will have to pay almost twice as much. The cost of powerful heat guns used in construction and industry can reach up to several dozen and even hundreds of thousand rubles.

Watch video review brand products Master:

Thermal guns are especially popular. They perfectly cope with heating of greenhouses, industrial premises, warehouses. They are widely used during construction work. A distinctive feature of the equipment of this brand is excellent performance, high reliability, simplicity and ease of operation. All models manufacturer set a warranty period of 1 year.

Let's sum up

Gas guns for heating have excellent consumer reviews. They are effective modern climatic equipment capable of a short period of time to heat any room and maintain the desired air temperature in it a long period.

To increase safety, heaters are equipped with additional protection of the housing from overheating and flame control devices. This avoids emergency situations and a possible fire. Today, this equipment is well-deserved, as it is one of the successful ways to install and maintain comfortable temperatures in rooms with a large area.

Quite often in the country house live not only in the summer, but in the cold season. And then there arises a quick need to solve the problem with its heating.

The installation of a traditional heating system consisting of pipes, radiators, boiler is not always justified. Much more convenient and less costly use of mobile devices.

Portable devices can use both liquid fuels or natural gas and electricity as an energy source. One of the most sought-after is a gas heater for giving, providing a decent result with minor costs. Nowadays, electricity is used for heating at home, too expensive pleasure that not everyone can afford. Conventional stove heating needs to be performed by some tedious and non-alternative operations.

1. A little about the gas unit
2. All pros and cons of equipment
3. Principle of operation
4. Types and its use
5. Tips for choosing a model

General information about the unit

Household portable gas heaters for cottages belong to one of the types of heating equipment, which functions on the burning of natural or liquefied gas.

The design of the apparatus includes the following main elements:

• Burner;
• Heating segment;
• Heat exchanger.

To facilitate the operation of the device, are additionally equipped with control devices:

• Thermostat;
• Ignition system;
• Automatic.

Depending on the organization of heat transfer, heaters are divided into several types:

1. Convectors;
2. Infrared;
3. Catalytic.

Most of the aggregates are designed to heat the rooms, but there are both street versions for use in special conditions. Gas mobile heater for giving can be of any type, of those listed above. Each of them has characteristic features and disadvantages. But there is something in common to all devices.

The main advantage of this heating equipment is a high efficiency. Among other benefits, autonomy and convenience of maintenance should be allocated.

The advantages and advantages of gas units

The principle of operation of the infrared device is based on the release of radiation, with which the items located nearby are first heated, and they subsequently give their heat surrounding air. Such devices can be used both optional heating equipment and as the main one.

The main advantages of infrared devices are:

1. The speed of heating:
2. Uniformity of heating;
3. Compactness;
4. Economy;
5. Ecology.

The device is almost devoid of deficiencies, except for the limitations associated with the execution of fire safety rules. The equipment is ideal for heating rooms with low ceilings. In the country, street gas heaters can be used for air heating on open terraces, in conversations. The devices are successful due to their efficiency and ease of operation.

We watch video, types and their advantages:

The catalytic heater works on the principle of burning without an open flame. Heat is highlighted when the fuel is oxidized. The oxidation reaction occurs on the surface of the catalyst. Such burning is characterized by high thermal efficiency and environmental safety.

Possessing many advantages, for example, silent the combustion process and the speed of the room warming up, catalytic units are comparable with infrared.

But still the most popular in domestic consumers enjoy convectable gas mobile heaters for giving. Therefore, on the features of this equipment, we will stop more.

How do gas convectors work

The device refers to gas air-heating equipment widely used in our country. The basis of its functioning is based on the principle of convection, the essence of which is to dissipate the heat obtained during the combustion of the heat in the heated room.

His main advantages are considered:

• Simplicity of design;
• Reliability;
• Acceptable cost.

The disadvantage of the device is the need to equip the output of the combustion of fuel from the room. And although the effectiveness of convectors is less than that of the above-described catalytic and infrared analogues, nevertheless, the presence of many advantages and the availability of cheap fuel predetermined their popularity.

This type of heating equipment is represented by both portable gas powered devices and standard, which are connected to the main network.

Stationary heating at home

The converter differs from other heating devices by the fact that its combustion chamber is isolated from the room. Air comes directly from the street on a special pipe. It is also displayed out and combustion products. Unlike a conventional boiler, the gas in the apparatus heats out no contour with the coolant, but directly the combustion chamber, the body of which is made of cast iron or steel and air flowing. The boiler must be drowning constantly to heat the coolant and maintain a certain temperature in radiators, otherwise water in the pipes can freeze, which will lead to an emergency.

A gas converter heater for giving without chimney can only be stirred if necessary, at the request of the homeowner. He does not face the freezing of the coolant, because there is simply no such in the device.

The device can be mounted on the wall, which is pretty simple. Through end-to-end stroke and pipe from the converter is inserted into it. Create additionally chimney is not needed. There are also outdoor converter gas heaters for giving. These devices differ extremely great performance. But they are characterized by great fuel consumption and the need to connect to the central highway.

Gas heaters

In this regard, the use of them for dacha heating in small areas is not economically profitable.

Portable Gas Converter Heater from Callon

Portable devices are distinguished by the fact that they are powered by fuel, which is located in a special container located in the case itself. This ensures their mobility.

The devices can be installed anywhere in the house and on the outdoor terrace. Fuel enters the combustion chamber with small portions. In this regard, the devices are very economical.

But any gas converter heater for giving with a balloon has two weaknesses that need to be considered when choosing this equipment. First, the device has a small performance. Today, manufacturers are introducing various innovations, trying to increase the efficiency of the device. Secondly, such devices have a limited fuel supply.

Heat gun

This variant of the country heater is the most powerful. It is a large tube with a built-in fan, the blades of which are made of ceramics. Inside the case there are ring-shaped tubular inserts equipped with nozzles. The incoming gas is burning over them and as a result, all heat seeks to the center of the pipe, where it blows out with a powerful fan. The heat cannon can heat a part of the airspace on the street even into a strong strule.

In the room, it is not recommended to use such devices, as they consume a lot of oxygen. But due to their great performance, the devices are not suitable for heating tents or open areas.

What to choose?

Summing up, you can advise the following:

• If a device is needed to be used regularly, it is better to choose a gas convector.
• To heat the rooms of a small area, you should choose a catalytic apparatus.
• Deciding to pull the device all the cottage, it is necessary to acquire an infrared heater.
• If necessary, sometimes heating a gazebo or pavilion buy a heat gun.

So the first thing to determine how the equipment will be used, and then choose a model that meets certain requirements.

In the cold season, gas heating for cottages will serve good service, as this is a fairly economical type of fuel, especially since the heating process itself occurs fairly quickly, which is important for premises without permanent residence. Only such heaters are a large amount, and they have different power and heating principle, therefore, the choice of the aggregate, first of all, should affect the frequency of your presence outside the city.

Below we will talk about this somewhat more, and we will also find out more by a video demonstration in this article.

Gas heating

Types of heating

Convectors can work not only from the trunk, but also from balloon gas, so this unit is quite suitable for your country house, it will only have to change the cylinder to refill from time to time. Connection in this case is performed very quickly and easily, but we will talk a little later about the tanks for propane-butane themselves.

The combustion of the liquefied hydrocarbon gas (SUG) occurs in an isolated chamber and the air is heated from its heat, which is located between this chamber and the decorative casing rises up, that is, the convection process occurs. This design has a fairly moderate price (depends on power), but the main thing is not even in this, and in the rapid warming of the room, which, perhaps, is in the foreground in case of non-permanent heating.

Another important advantage of this design is that there is the ability to automatically adjust the temperature mode in the range from 13⁰c to 38̴̴⁰c and even at maximum load, the cover does not heat up above 60⁰c, therefore, does not constitute the risk of burns. In cases where the gas pressure drops to a critical mark or the flame for any reason goes out, the automatic lock, turning off the device, is triggered.

Catalytic heaters can be called multiplishing conditionally, since the instruction allows not only gas here as an energy carrier, but also gasoline, although in this case it will be about the first version. Such aggregates are used for closed rooms (, counters, warehouses, apartments, and the like) with an optimal area of \u200b\u200bno more than 20m 2.

Note. Catalytic borony is called burning without a flame, which occurs as a result of oxidation of organic and inorganic substances on a solid surface. The amount of heat released by such a catalyst heats the surface to red or yellow cagine.

Heaters of this type are very good for residential premises at least that they are practically safe - the possibility of explosion or involuntary ignition is practically reduced to zero. With the help of such a device, the garden heating with liquefied gas (song - propane-butane) is quite effective (some models are able to produce up to 4,9kW) and economical.

The catalytic panel is usually made of fiberglass with a platinum additive as a catalyst.

A autonomous gas heater for giving with a ceramic panel is very efficient, from which ultraviolet radiation comes and can work, both on a liquefied carbon gas and natural propane-butane. Such devices can be classified by panels, so, light ceramics has a radiation temperature of more than 800⁰c, and here, dark (catalytic) have an IR radiation below 600⁰c.

The main distinguishing feature of the infrared ceramic heater from the catalysis is that the first open flame at the outlet and, therefore, higher power, as well as the increased operational resource of the plates. The devices can be very easy to install in the location you need, connecting the cylinder with a rubber or bellows sleeves.

To date, the heating of giving gas with the help of infrared heaters has not been no know-how, but, despite all the advantages, devices are not widely popular, it is possible that it is a fairly high cost of aggregates.

The installation of a ceramic IR heater is not limited to the volume and quadrature of the room - the most diverse models are always at your service to offline and online stores. So they can be used not only for giving and country large houses, but also warehouses, supermarkets, and the like. In addition, the models can be not only outdoor - they can be mounted on the ceiling, walls and even mounted to the floor.

Not always gas heating in the country may heat the entire room - there are also portable heaters that will help you in a cold room, while you run the main heating system, or if you came there for several hours. Of course, for a long time such a balloon is not enough, but this is mostly depends on the model and volume of the reservoir.

Gas heating boilers are also in great demand for summer cottages, although this applies mainly to those situations where the country's country is often coming or even live there. The advantage of such aggregates is that they are constantly able to maintain the specified temperature, and you can easily leave, knowing that the warm room is waiting for you upon arrival.

But such aggregates have quite a lot of varieties, so, they can be outdoor and wall-mounted, single-circuit (without DHW) and two-circuit and, finally, convection, as in the photo above and condensation.

If short, then:

• convection aggregates more suitable for radiator contours;
• and condensation - for a water warm floor system.

In the case of combining these contours, a convection option is usually installed, embedding a three-way tap for adjusting the temperature on different circuits.

Gas cylinders and their connection

• Of course, the city most often there are no highways of natural gas, so the heating of the country house with gas cylinders is quite normal and here it is not about compact devices, it is a complete provision of a boiler with an energy carrier. But in this case, one tank will be clearly not enough, so you can independently assemble a complex of such capacities, the number of which can be determined by the table below.
• To join the cylinder to the total feed line, you can use rubber and rubberoplastic hoses, the length of which should always be slightly more distances between the tank and the pipe so that there is no tension. A significant drawback of such sleeves is that they cannot be operated for more than 5 years - the rubber cracks and the risk of gaps, which can lead to fire and even explosion of SUG.

Today it is difficult to find a user who would never be prepared on plates working on blue fuel, natural main or liquefied from cylinders. Furnaces Gas benchmarks Many Russians are used in dachas where there is no main gas pipeline, the product is connected to the cylinder, having an oven, such a design completely replaces the standard stove.

Many readers are interested in what such miniature devices differ from full-sized models, which technical parameters, advantages and disadvantages. To find out all the nuances of the right use and find answers to frequently asked questions, we advise you to carefully read our article.

The mini-plates of desktop accommodation, equipped with an oven, have the same set of technical parameters as their standard fellows, so briefly lit by each.

Dimensions and weight

These very compact products have a width of 550 mm, height and depth - 400 mm, so they can be installed anywhere in the kitchen, for example, on a wide window sill or separately standing in a kitchen headset. Product weight is a maximum of up to 19 kg.

Corps and cooking surface

The body of the original furnace is made of an enamelled metal of brown, such a coating is distinguished by persistence to minor mechanical damage. The cooking surface with gas burners is made of heat-resistant enamel, it is quite simple to care for her, just do not use detergents with abrasive filling, so as not to scratch the surface.

Burners and burners

Many consumers still confuse these names: a modern design with automatic ignition on piezoelements or an electrical analog is used to prepare on gas onto piezoelectric elements, and the open burners are installed in the oven.

Oven

The miniature copy is designed for baking and is able to perform similar actions as the standard version, only the internal volume of products manufactured not more than 19 liters. The door is equipped with two-layer glass to protect users from possible burns, because the maximum temperature reaches 270 degrees.

Gas control system

Modern gas equipment is available only with such systems intended to ensure the safe use of blue fuel. With a sudden attenuation of the flame, the special sensor transmits a signal, the special rod blocks the gas supply to the burner or burner in the oven.

Protection against children

Rotary switches are arranged in such a way that small children will not be able to turn on the gas stove during the absence of adults.

Today, not many manufacturers are engaged in the release of miniature gas stoves with ovens, the company is leading in it from the Republic of Belarus.

Features of ovens with gas burners

The model range of gas mini-plates with ovens is small, so choose the optimal option for your needs is quite simple. Almost every model can work from the main or balloon liquefied gas. Dimensions in such products are small, as well as their own mass, so they are easy to transport, for example, to the cottage to ensure that there are hot food and even home pastries throughout the season of work on the garden and in the garden.

The oven is small, but really will help you in the fall: it can be pastenerize canning banks, dry the sliced \u200b\u200bfruits or mushrooms collected in the forest. Using a grid and a baking sheet for grease collection, you prepare meat delicacies no worse than the standard oven in the urban apartment. The main advantage of such a product is a unique compactness and excellent mobility.

Pros and cons

The advantages of desktop models are almost identical, as well as their large-sized analogues:

1. There is no inertia when heated the burner, therefore, instant heating of dishes and its content occurs.
2. After overlapping the gas supply, heating stops, and this means that the risk of digesting the food is not 100%.
3. Heating power can be monitored visually, reducing or increasing flame burning.
4. The cost of gas in any region of Russia is much less than the price of electricity.
5. Although the cost of miniature desktop counterparts and higher, but they are available to wide segments of the population.

There are insignificant minuses:

• the oven has less opportunities than in the standard version;
• the connection to the cylinder must be checked more often than the main option.

Gas household equipment over the years has been the most affordable and very popular solution. Modern developments improve technical parameters, use, as well as the safety of long-term operation.

How to choose

It is necessary to choose a desktop household gas stove in such a way that it meets your requirements, experts advise paying particular attention to such characteristics:

1. Sizes and weight. We have already spoken earlier about standard desktop dimensions - they rarely exceed the parameters of 550x400x400 mm, and the weight is not more than 18-19 kg. Such a product does not take up much space, even in the most small-sized summer cuisine.
2. In each model there are two burners, and the total power does not exceed 1.6 kW, they may be the same in size or different, which depends on the designer's whim.
3. The housing of the product is made of metal coated with white or brown enamel, a heat-resistant enamel is used for the cooking surface. Compact models fit harmoniously in the interior of any kitchen.
4. Oven. The inner coating is an enameled metal, maybe a gas or electric type is already an amateur, some prefer an electric grill to roasting meat delicacies, but the gaseous analogue is still more comfortable for the cottage.
5. The presence of grill and spit increases the cost of a mini-plate for desktop placement, so such an addition is only interested in gourmets, which in any atmosphere and weather wish to taste a favorite delicacy.
6. All models have a high level of security, which is achieved by applying the latest technologies: Gas control sensors are installed in the oven and on the cooking surface, the automatic ignition system helps to do without matches and piezoslazhigals. Parental control should be present in any household equipment if you have small and rather inquisitive children in your family.

Rating

• Material:
• case - Metal with heat-resistant coating
• cooking surface - enamel steel
• Total power:
• two burners - 1.70 kW
• oven - 1.0 kW
• Oven: 19 l
• Maximum temperature: 270 0 C
• Dimensions: 550x400x400 mm
• Weight: 18 kg
• Warranty: 2 years
• Additional data:
• brown color
• the number of glasses in the door of the oven - 2
• bastard, grid.

• compactness and low weight
• availability of gas control system
• great oven works fine

• not found

The model is really excellent quality, which is talking about positive feedback from many real users. The company Gepesta from Belarus keeps the quality and reliability of the household appliances produced at the USSR level - you can use the device for at least 20-30 years.

• Material: Enameled Metal
• Power Class: A
• Total power:
• korfork - 1.6 kW
• oven - 0.4 + 0.6 kW (Upper and Lower Ten)
• grill - 0.8 kW
• Oven: 18 l
• Maximum temperature: 260 0 C
• Sizes: 390x550x400 mm
• Mass: 18.3 kg
• Additional data:
• works on natural and liquefied gas
• electric oven
• electricity consumption with standard loading - 0.49 kW. hour

• easy to use desktop
• quality plus reliability
• in the oven to cook porridge

• not found

GeFest GHg 100 k19