Paving tile Old city laying scheme. Paving Tile Old Town: laying options

Street, country and garden landscapes are drawn up today on modern trends. The design technology is distinguished by different techniques and a unique combination of shades, as well as colors. Today it has become possible to use dyes and innovative raw materials that have high quality. This can also be said about strengthening materials.

Thus, manufacturers offer paving slabs with high operational and aesthetic characteristics. Such a variety allows you to turn around the fantasy of the site owner, ensuring the safety and beauty of street and receiving tracks, sites, sidewalks and areas.

Tile "Old Town", the options for stacking which will be discussed below is an excellent example of how diverse installation schemes can be. A rather important factor is also a color scheme, to fully appreciate which you can after the monstering snow or summer rain. A unique effect can be achieved thanks to the quality and format of the surface.

Characteristics

The paving slabs "Old Town" is presented in the most popular and common types of coating. Manufacturers offer a variety of colors and sizes that allow you to equip the exteriors of the yard, space near the entrance door or the porch, as well as the area of \u200b\u200bthe pedestrian street and different objects.

The described tile has a variety of fragment parameters. Three categories of thicknesses can be distinguished. For example, 40mm pavetling stacked on paving tracks. 60-mm tile is suitable for territories with an average load, while 80mm products can provide strength in the venue of the car parking and in the passage areas.

Paving tile "Old Town" has a length of from 60 to 180 mm. The width is standard and is 120 mm. The mass of one square meter may vary in the range from 94 to 189 kg. The class of concoction used by frost resistance can be presented B20-30-35. The level of abrasion is 6%.

Stacking Technology: Preparatory Stage

Before starting work, it is necessary to prepare standard tools and materials. It is important to determine the amount of materials. One square meter of the square should be stocking cement in an amount of 25 kg. For the same volume of work, three sand bag should be purchased. Specialists recommend purchasing materials with some reserve, this will allow you to take into account specific soil conditions, project loads, terrain relief and other conditions. The toolkit is not so diverse, it consists of:

marking cord;
shovel;
ropes;
workman;
household broom;
level.

Algorithm of work

The technology of laying paving slabs "Old Town" provides on the first stage the leveling of surface drops. The master will have to align the soil. In the second stage there is a markup of the outlines of the tracks. It is important to ensure the admission of the width of the border.

Next are mounted border elements. Now you can begin the preparation of a mixture of cement and sand in a ratio of 1 to 3. The composition is placed to strengthen the border. Given the characteristics of the sketch, you can start styling a paving. Elements should be allowed to be allowed and customized in height using rubber inquiry.

Stacking options: Installation on primer with the basis

Tile "Old Town", whose figured elements can be laid according to a specific scheme, sometimes mounted on the primer with the base. As the main difference from technology that does not provide for the presence of the basis, it is necessary to create an additional layer of foundation. It will be tough, and is a pillow of concrete or rubble. Such a layer excludes the spreading of the track and its partial seating.

The primer layer when installing on a concrete basis may be minimal. It will provide only fixation on the surface. Characteristics of the Tile "Old Town" were mentioned above, however, they are not all that the master should be known. Before starting work, it is necessary to ask what the technology of laying material. Starting manipulation is necessary in dry weather. Wash coverage First time after laying is not recommended.

Layout schemes

If you have a "Old Town" tile, options for finishing the track in the garden, the options for laying this material you should be studied. It should be remembered that all trapezoidal and rectangular elements have the same width. Therefore, the tile can be laid across or along the tracks with separate stripes.

The most difficult option for paving the territory in the courtyard of the house is the scheme of the chaotic location of the elements. In this case, transverse and longitudinal seams are excluded. If the material has to be laid in direct areas, then you can use a cross-seam scheme. In this case, elements with different sizes are stacked between the wets. It is necessary to navigate the width that is the same for all elements.

The laying scheme may provide for the formation of a longitudinal seam. This method can be compared with the above, but the bands in this case are formed along the track. Another option laying the tile "Old Town" is a scheme without seams. It is the most difficult and usually designed in a graphic editor. In order to increase the artistic value of the composition, you should purchase color items that are stacked in an arbitrary position.

For registration of radius and winding sites, it is possible to use the elements of the FEM trapezoidal form. They are specially designed for complex territories. These components have different dimensions and allow you to maximize the design at intersections and turns. These zones can be decorated with rectangular stones if necessary. Stop the tile on the radius section should be started from the inside. The seams between the elements are lined with the wedge. Straight areas are usually fitted with ordinary tiles, while concentrated circles and radius areas are decorated with a wedge-shaped paving.

Alternative schemes

Considering the options for laying the "Old Town" tile, you must pay attention to the radius ornaments. Configuration of the territory and laying scheme can be any. However, the tile can be laid taking into account the integration of any drawing or ornament. The color can be distinguished by the space at the wipers, laying the bright shade tile into several rows.

In large areas, you can lay out a geometric pattern using narrow bands. Zoning looks very profitable. In this case, the width of the ribbon is comparable to the sidewalk parameters, and the drawing acts as the main element of the design, attention is concentrated on it.

Considering the layout of paving slabs "Old Town", you can choose a Christmas tree pattern. In this case, two or more colors alternate, which will depend on the preferences of the owner. The territory may be motley, in this case it will take several colors, the emphasis shifts to transverse and longitudinal seams, as well as on the original texture of the composition.

Conclusion

They ate as finishing the garden of the garden, you decided to prefer the paving slabs "Old Town", the manufacturer must be chosen. Among other things, Brother's products are presented. This Moscow provider offers tiles at a price of 617 rubles. per square meter.

fB.ru.

Features of paving slabs "Old Town"

All items from the "Old Town" collection have the same 120 millimeters width. Such a feature allows the sidewalk to the pavement tile by strips using at once all 5 species of rectangular elements. Strips can go both along and across a garden path or sidewalk.

Laying of direct sections of paving paving slabs

There are the following layout schemes "Old Town" for direct sections:

Transverse seam. Elements of different sizes and colors are stacked in the width of the path or sidewalk.
Longitudinal seam. The laying is made on the same principle along the sidewalk.

Combining transverse and longitudinal seams. In such a scheme, the longitudinal seams go into one row along the edges of the track, creating the effect of the presence of borders. Inside, the tile is placed in transverse seams.
Chaotic tile layout. The length of the rectangular elements of the tile "Old Town" is a multiple total value. Thanks to this, you can produce chaotic laying of tiles without gaps.

In direct areas you can use mainly gray-colored paving slabs. Colored elements can be added to laying through arbitrary gaps, creating a chaotic pattern of the track. The second version of arbitrary color layouts of the tile is zoning the path or sidewalk. For example, the edges of the track are brushed with gray elements, and in the central part laid color tiles (preferably of the same color).

Laying of winding pavements Tile "Old Town"

Winding gardens can be coated with rectangular elements of paving slabs "Old Town". To do this, there is no need to order trapezoidal elements that have not every supplier. The rounded chamfer tile of this collection allows you to reduce the area of \u200b\u200bgaps between the elements when laying winding sidewalks. In this case, visually more beautiful and more reliable will be labeled only by longitudinal seams.

Color schemes layout paving slabs "Old Town"

For the tile "Old Town" there are many color schemes. Here is some of them.

Using 1-2 longitudinal rows of one color along the edge of the track or site for imitation of the flavor.

Creating a geometric pattern with a drawing duplication on a large paving area.

Zoning in color of individual sites.

Diagonal stripes or christmas pattern on a large platform.

Pepling chaotic layout diagram of elements of different colors. For this scheme, it is necessary to purchase elements of the "Old Town" collection from our company of all four colors. The chaotic color scheme allows you to shift the focus on the transverse or longitudinal seams on the originality of the texture of the overall composition on the crucible area.

As you can see, the collection of paving slabs "Old Town" is a universal finishing material for garden tracks, sidewalks and vehicles for transport. Thanks to the rectangular form, the choice of layout schemes from the "Old Town" is much larger than other types of tiles.

pavor-borderr.rf.

Schemes of laying paving slabs "Old Town"

The scarf of this species is unique to the set of concrete tiles included in it. It consists of sets with dimensions:

tiles size 118 * 178 * 60,
tiles measuring 118 * 118 * 60,
tiles measuring 88 * 118 * 60.

Because of this tile laying scheme, quite original are also obtained. They are not always easy to estimate in the head, you need to sit down and draw on paper or search for options on the Internet. We offer you several popular and beautiful ideas to choose from:

In addition, this tile can be combined with the usual brick or other species - so you can reduce the project and make it even more interesting and original.

Preparation of the laying surface

Consider how to make the styling of paving slabs Old Town do it yourself.

Initially, it is worth making an objective assessment of the old surface.
Next, it is necessary to make accurate marking of the area on which the paving slabs will be laid, it is better to use the construction line - it is more reliable.
On the stretched fishing line, a place under the border is prepared, do not forget about the clearance of 2-3 centimeters, which will be used to accurate curb.
The curb itself needs to be fixed with a solution of cement sand in proportion 1: 4 is the most common and reliable combination. Immediately proceed to the base for the tile is not worth it, you need to wait for the clutch of the solution and border.
The base should consist of dropout or sand, which is added to the cement in proportions 1: 6. The finished mixture should be eliminated with a six centimeter layer and perfectly leveled. 6 centimeters of the mixture will perfectly cope with the drainage.
To avoid tile drawing after laying, the surface must be rich in water.
For the coupling of the sand, it is better to use a special vibropress, you can rent it. It is manual and mechanical, they have electrical or gasoline engines. Experts choose the vibropress (trimmer) mechanical.

Stages of laying tile

Upon receipt of the perfectly smooth and tumped surface (layer 1), you can already prepare the second surface (layer 2). It is not necessary to break, but the composition should be made of cement and sand, the ratio of 1: 5, the thickness is no more than 2 cm. Find the second layer by the beaches, but each specialist works with a tool comfortable for it. After the work done, you can start laying the tile.

Scheme laying paving slabs Old Town will not create a lot of trouble, when working with a tile, you just need to monitor the pattern. There are several ways:

Rubber or wooden hammer. The tile is laid on its place and tamper;
Vibrotrambovka. The entire tile with the pattern is stacked, then the rubber sheet is paved under the tamper, and we go through all tiles.

Final stage - rubbing seams

For this stage, it is better to take river dry sand and with a brush everything is thoroughly mixed, but you can use the usual broom. After all moisten with water.

Be sure to fail in some places in some places and the procedure is to repeat again after a while. After passing all the stages, the tile will not be fused under the legs.

In such a simple way, you can get a surprisingly beautiful paving pattern, after which you all guests are with pride to say what the styling of the tile old city themselves!

For clarity, you can also familiarize yourself with the video instructions:

sandstone.BY.

Description

The range of this paving is one of the most common and sought-after types of paving coverage. It is easy to understand, manufacturers offer various sizes and colors, it allows you to equip the interiors of the courtyard, space near the porch or entrance door, a large area, a pedestrian street and other objects. Despite the fact that it is a modern and high-tech material, it also has certain priorities, which are very significant and insignificant controversial qualities. The advantages of this wonderful material are:

A wide range of design solutions that are carried out due to the diversity of colors.
Technology allows you to get tiled with high resistance to low temperatures. With proper laying on the surface of the seamless texture of the paving, moisture is not stuffed.
Not polished surfaces, provide the effect of anti-slip, is a safe sidewalk, stopping public vehicles, platforms of filling stations.
High Ecological Cleaning Indicators. In hot summer days, no harmful substances are released in the air.
The best option that allows you to combine democratic prices and excellent quality.
Ease of operation and repair of a damaged area.
Minimum auxiliary materials.

In the photo - the option of laying paving slabs Old Town:

In addition to all listed qualities, the tile old city has another priority - fragment parameters. Today, all manufacturers offer products with the following dimensions. Three categories of thickness:

The technical indicators of this popular material are as follows:

Fragment length - 60/90/120/180 mm.
Width - 120 mm.
Height - 40.60.80 mm.
Massa -94-141-189 kg / square meters. m.
Concrete class B20-30-35 frost resistance.
Water absorption cycle F200.
Erase rate no more than 6%

Variants of drawings and patterns, laying scheme

Before laying pavement tiles, you should prepare standard materials and tools, as well as laying geotextiles. Calculate the number of preparatory materials simply. Per quarter. The meter of the square is the optimal option will be stocking cement in the amount of 25 kg, three sand bags and the same amount of sand. This is a classic ratio, more practical to make a margin, taking into account specific soil conditions, terrain, project loads and other conditions. The toolkit is quite simple. It consists of two shovels, marking lace or rope, it is necessary to include trowel, level, and household soft broom.

On the video - Laying Tiles Old Town do it yourself:

Technological bases of laying are as follows:

Leveling surface drops for laying, soil leveling.
The markup of the outlines of the planned tracks, the admission is required to the width of the border.
Installation of border elements.
Preparation of the sandy cement mixture, in proportion 3/1. She strengthens the established border.
In accordance with the sketches, the blocks are stacked, the elements are well docked together and are adjusted in height with the help of rubber inquiry.
Formation of slope for water drain.
After the end of laying a paving slaves, the entire track falls asleep with primer, it is especially important to fill the gaps. Excessive clean with a broom.

The link describes the laying technology of blocks in detail. Creating the main sketch of the sidewalk from the paving the old city must be remembered, one pattern. This is a strict geometry and the presence of lines of transverse or longitudinal directions. In addition, the selection of colors is important - a contrast combination or scheme "Chaos" when the designer simply improvises. Applicable use of braid circuit, parquet, Christmas tree, various ornaments resembling the traditions of Italian and Arab masters. But these options for laying paving slabs are some departure from the classic scheme. Here you can see various options for laying paving slabs blocks. It is also necessary to take into account some subtleties in laying this type of blocks that do not need to neglect. First of all, it is necessary to work only in dry weather, some time after laying the sidewalk it should not be washed, thoroughly clean her surface from cement residues, this tile for the track in the country quickly absorbs foreign substances and loses its appearance and color.

2gazon.ru.

Types of paving slabs

According to the material of the manufacture of a paving, it happens:

concrete;
clinker;
granite.

The technology of the production of concrete paversing is to vibrating concrete casting with the addition of pigments and other impurities that ensure the performance of the material. The concrete pavement is highly durable, but susceptible to the effects of the acid medium. With prolonged contact with acid on the surface of concrete paving slabs, traces of corrosion appear.

The clinker pavers is made of special clay rocks by firing in a blast furnace. The product is resistant to the effects of ultraviolet rays and low temperatures, to mechanical damage, does not absorb preciputes.

The granite pavement is made from natural stone, the coating of granite is the most durable and durable. The life of the granite pavement exceeds 50 years. Depending on the production technology, the following types of granite blocks are distinguished:

kololaya - the product with uneven faces, obtained by splitting the stone block on the elements;
the sawn - the stone, processed on the machine, is characterized by six perfectly smooth faces.

Methods of laying a blocking

Low blocking can be laid in several ways:

on a sand pillow;
on the cement-sand mix;
on a concrete basis.

The method of laying paversing on sand is used for the paving pedestrian tracks, household sites and other sections with a low passage load. Under the device for cars for passenger cars, a blocking can be put on the crushed stone either on a mixture of sand with cement.

The laying technology of pavers on a concrete base is considered the most reliable, road pavement laid on concrete are distinguished by resistance to sending. The method can be used to cover road sections with a large load.

Important! Road coating work should be carried out in dry weather.

How to properly lay a paving on a concrete basis

Laying paversing with their own hands is performed using the following tools and devices:

shovel;
kiyanka;
building level;
master OK;
pegs;
cord;
broom;
rake;
manual or vibration traam;
reiki;
bulgarian.

List of building materials:

paving slabs;
cement;
sand;
crushed stone;
borders.

The laying technology of the paversing includes four main stages:

preparation of the foundation;
concrete base device;
installation of pavers.

Preparation of the foundation

At the preparatory stage, the land is purified from roots and different kinds of vegetation. Perform the markup of the site under the laying of the paving strokes through pegs and cord. The garment is made, the depth of the pit is about 25-40 centimeters.

At the stage of preparing the base under the paving slabs, it is worth taking care of the drainage of atmospheric precipitation. Water drain can be organized in a transverse, longitudinal or cross-longitudinal direction. The bias for water flow should be at least 5 0.

With the help of manual or vibrotability seal the Earth. In order for the sidewalks through the seams of paving slabs, weeds, the plot is covered with a layer of geotextiles.

The next step of preparatory work is to create a pillow of sand. The previously prepared land plot is covered with a layer of sand, the thickness of the layer of about 10 cm. The sandy base is moisturized and trambed.

A layer of fine-flow rubble (rubble fraction 5-20 mm) poured into the laid sand. The surface is planned and compacted using a tamper. The crossbank layer is poured by a cement screed. After drying the solution, they perform a second layer of sprinkle from rubble, bringing rubbed pie to a height of 15 cm.

Concrete base device

Preparation of base from concrete is performed in the following sequence:

along the perimeter of the platform to be paved by the road tiles, set formwork;
prepare a concrete mix. The composition of the concrete mix includes cement, sand and crushed stone in the proportion of 1/3/2;
the previously prepared rubbery pie poured a concrete mix of a layer thickness to 5 centimeters;
to enhance the structure, the reinforcing grid is placed on the concrete basis;
on top of the reinforcing mesh, the second layer of concrete is poured. The thickness of the concrete layer ranges from 5 to 10 centimeters.

When arranging a concrete basis, it is necessary to pay special attention to the issue of water disposal. Specialists recommend providing dotted moisture applicants or a straw.

The laying of the blocks is made in two or three days after soaring the concrete coating, but the curbs are installed before that.

Installation of borders

Before putting the borders perform the dismantling of the formwork, along the concrete base, they pump the trench, produce a frighting of the RAA fine-phrase rubble.

The height of the border must correspond to the height of the finished road surface, the cord is pulled to comply with the required level.

Borders are put on a concrete solution, such a method of fixation will ensure the durability and strength of the structure. The elements are exhibited at a distance of about 3 mm from each other, drive into a fresh solution with a rubber hammer. The concreted border must dry, after drying the solution, the clearance between the walls of the trench and the enclosing elements fall asleep with sand. Sand is wetted with water and seal by tamping. Next, you can proceed to the next stage of work.

Laying paving slats on concrete base

There are several laying of paving stacking on the concrete basis. One of them involves the installation of paving slabs on a dry mixture of cement with sand (method of herbs), the second - on the cement-sandy solution.

To mount the pavement to the galts, the layer of dry cement-sand mixture is fired on top of the concrete base. The layer thickness ranges in the range from 5 to 6 centimeters. The pavement tile is placed on the galts, in accordance with the selected scheme, and it is rambling with a rubber hammer. Installation of paving slabs produce from the curb, moving from above down towards the drain.

Power on the cement-sandy solution is considered more reliable and durable, however, the dismantling of the coating without damage to the tile will be no longer possible. The coating technology for the finished solution is as follows: the cement-sand mixture is prepared, which, with the help of a trowel, is laid out on the prepared foundation. The solution layer should be two or three centimeters. The pavement is pressed into a fresh solution, the position of the tile is adjusted using a ciyenka. The distance between paving elements should not exceed 1-2 mm. Fitting paving slabs in size is performed using a grinder. During the work, the correct installation of the horizontal checks the construction level.

For paving large areas, a paving styling machine is used. Laying the paving coating using mechanization means can significantly increase the efficiency and speed of work.

After performing installation work, the seams between the elements of the pavement are covered with a dry mixture of cement with sand. With the help of water seal a layer of herbs. The procedure is repeated until the seams are not fully filled with a mixture. The area of \u200b\u200bthe coating paved in a paving, is operating in two or three days.

Types of drawings of laying paving slabs There are many, one of the most popular types of blocks is the "Old Town". Tile for paving road surfaces "Old Town" is a set consisting of 3 or 4 elements with rounded corners. Stones differ in size and colors.

Scheme laying paving slabs completely depends on the designer's imagination. One of the options laying paving the old town is a combination of three colors (for example, yellow, brown and peach) in an equal proportion, laid out in chaotic order. Another option is the laying paving slabs with the use of a combination of two colors, along the edges of the track laying the stones of the same color, which go to another color gamut to the center.

We offer to watch the video, which shows the process of laying pavers on a concrete base:

kirpichguru.ru.

Type of production

The shape of such a tile is in the form of a square, rectangle and trapezium.

By type of production Tile, the Old Town is divided into:

According to the color scheme, the paving slabs happens: brown, peach, gray, green, white, red and yellow.

Schemes layout paving slabs Old city

Due to different colors and sizes of the tile, you can come up with an infinite number of laying schemes. Due to its small tile, the old town looks harmoniously both on large areas and on small streets.

Tile Old Town has a number of advantages over other types of tiles, which allows it to be used in the most hard-to-reach and narrow places.

With its help, you can lay out complex drawings from simple details. Different size allows you to lay the tile without freight. This positively adds on the budget of any city.

Any complex drawing can be postponed, and it will look harmonious, both on paths and porches and on the roadway and sidewalks.

Tile do it yourself

If you have your own home and a big plot, and you want to make any highlight on the site, we recommend that you make the old town to do with your own tiles. Currently, in building stores, you can purchase all the necessary tools.

For the production of tiles at home you will need vibrationtol, infusion form, color pigment, plasticizer, well, and, of course, a desire, and some skill in this matter.

If you already imagine what kind of pattern you want to see in your yard, you just will only remain to calculate the area of \u200b\u200bthe stacked surface and the number of consumables.

The cost of paving slabs

Let's look at what the Tile value is the old town, and at what price you can buy paving slabs.

First, the cost depends on the type of cement that went to the manufacture of tiles. There are conventional gray cement and elite Turkish white.

Secondly, on the quantity and type of color pigment, which is part of the solution. The cheapest white version, the most expensive black, respectively.

Thirdly, this is the weight and size of the product. Here everything is clear, the larger the area and the weight of the tile, the more expensive it will be more expensive.

Middle Price tag Tile Old Town ranges from 400 to 900 rubles per square meter.

If you decide to post the track on your site with such a tile, we recommend not to save, because you will walk on it every day, so you just need to spend time, put a beautiful pattern, and then admire the work every day.

Options Pattern Paving Tile

From what color and type to use the slab will depend on the final result and the quality of the work performed. To date, there are many options for laying paving slabs.

Consider commonly found:

We looked at all kinds of paving slabs Old Town, patterns of patterns and layout schemes.

You can, if you wish to make such a tile on your own by purchasing the necessary materials and equipment for this.

And you can buy a tile from the manufacturer, for this you just need to calculate the area of \u200b\u200bthe territory on which we must be laid tiles.

Tile Old Town is one of the most common and it is not surprising. Not only is this paving slabs look very attractive, it has a large number of laying options. And if you use a combination of different colors, then the old town look amazing. In this article, we will look at what the laying of paving slabs looks like the Old Town, options for laying it and combining tiles.

The old town allows you to raise your imagination and create various drawings and a combination of tiles. One pack of this tile usually includes the tiles of four sizes, but in some cases it is possible and three sizes - there is no smallest option. The maximum set includes a large tile, a square, a tile, having half the size large and the smallest, the surface area of \u200b\u200bwhich is one third from the large tile or 1/2 from the square. As you can see, the combination options from the existing dimensions are abused. Also, everything can be complicated by adding a variety of color options.

If you want to see the order in everything, then in the laying of paving slabs, the old city should be maintained by regularity. This applies not only to the selection of tiles in size, but also in color. The name of the paving slabs carries the very essence of the styling - the old town. In those old times, the roads of the granite stone of different sizes were laid out and no one thought about any sequence, so the stones were laid out chaotic - it gave the road no less beauty. That is, laying of paving slabs Old Town will look simply amazing if you make a small chaos in the masonry. The main thing is not to do "stains" from the frequent repetition of the tiles of the same size or color.

As can be seen in the schemes above, with any masonry options there is one pattern - this is the presence of transverse or longitudinal lines. These lines should be even. It may seem that this is not so important, but it is not. First, the finished version will be clearly attractive with smooth lines, even if there is chaos, secondly, on large areas it can cause a problem on large areas. Which problem? The tile can docile badly and not pass in some places - it will take a trimming, and this is not very good to reflect in the overall picture.

But it is also possible to lay paving slabs without complying with this line. With this method, you can hide a lot of errors, you do not need to adhere to any lines, but in addition it requires high time.

Paving tile is well trambed after the styling of the vibropilet. If it is made using technology, then no chips and cracks will not be formed. If you are worried about the tracks, it's just to attach a non-thick sheet of rubber on the traam tile.

In another, the old town is no different from the laying of the tile of other sizes and drawings. The only thing that will need this fantasy and of course patience. Usually, the laying of this tile stackers are asking for a slightly large price than usual.

Characteristics and features of the decorative paving slabs "Old Town". Laming Old Town Styling Scheme

Characteristics of tile

abrasability - 0.7 g / cm2;

Configuration and sizes

12 x 6 cm;
12 x 9 cm;
12 x 12 cm;
12 x 18 cm.

5.3 / 6.3 cm;
6.3 / 7.3 cm;
7.3 / 8.3 cm;
8.3 / 9.3 cm;
9.3 / 10.3 cm.

Schemes and layout options

General principles

Decorating direct plots

Figure and ornament

Tip! If you need repair masters, there is a very convenient service for their selection. Just send in the form below a detailed description of the works that you need to perform and offers to you in the post office with prices from building brigades and firms. You can see the reviews about each of them and photos with examples of work. This is free and does not oblige anything.

The most readable

masterskayapola.ru.

Tile Old Town: laying options, schemes, drawings

The current trends in the design of garden, country, street landscape are distinguished by a variety of technological techniques and uniqueness of combinations of colors and shades. Thanks to the use of modern dyes, innovative raw materials, excellent high-quality fastening materials, manufacturers offer unique types of paving slabs on operational and aesthetic qualities.

Such a variety allows you to turn around the designer thought and fantasy of the owner of the site, to ensure the beauty and safety of the doomes and street tracks, sidewalks, sites and squares. In this context, certain stylistic directions should be considered, which can be created due to one or another type of tiles. Tile Old Town is an example of how diverse types of laying can be used. No less important is the color range of this line of products, which can be estimated after a warm summer rain or melting snow. And the format and surface quality will allow to obtain a completely unique effect. This is a sidewalk of a small medieval town, stepping on which you can get on the streets of the most famous vintage historical places in Europe.

Description

A wide range of design solutions that are carried out due to the diversity of colors.
Technology allows you to get tiled with high resistance to low temperatures. With proper laying on the surface of the paving, moisture is not stored.
Not polished surfaces, provide the effect of anti-slip, is a safe sidewalk, stopping public vehicles, platforms of filling stations.
High Ecological Cleaning Indicators. In hot summer days, no harmful substances are released in the air.
The best option that allows you to combine democratic prices and excellent quality.
Ease of operation and repair of a damaged area.
Minimum auxiliary materials.

In the photo - the option of laying paving slabs Old Town:

The technical indicators of this popular material are as follows:

Fragment length - 60/90/120/180 mm.
Width - 120 mm.
Height - 40.60.80 mm.
Massa -94-141-189 kg / square meters. m.
Concrete class B20-30-35 frost resistance.
Water absorption cycle F200.
Erase rate no more than 6%

Variants of drawings and patterns, laying scheme

To begin work, standard materials and tools should be prepared. Calculate the number of preparatory materials simply. Per quarter. The meter of the square is the optimal option will be stocking cement in the amount of 25 kg, three sand bags and the same amount of sand. This is a classic ratio, more practical to make a margin, taking into account specific soil conditions, terrain, project loads and other conditions. The toolkit is quite simple. It consists of two shovels, marking lace or rope, it is necessary to include trowel, level, and household soft broom.

On the video - Laying Tiles Old Town do it yourself:

Technological bases of laying are as follows:

Leveling surface drops for laying, soil leveling.
The markup of the outlines of the planned tracks, the admission is required to the width of the border.
Installation of border elements.
Preparation of the sandy cement mixture, in proportion 3/1. She strengthens the established border.
In accordance with the sketches, the blocks are stacked, the elements are well docked together and are adjusted in height with the help of rubber inquiry.
Formation of slope for water drain.
After the end of laying a paving slaves, the entire track falls asleep with primer, it is especially important to fill the gaps. Excessive clean with a broom.

The link describes the laying technology of blocks in detail. Creating the main sketch of the sidewalk from the paving the old city must be remembered, one pattern. This is a strict geometry and the presence of lines of transverse or longitudinal directions. In addition, the selection of colors is important - a contrast combination or scheme "Chaos" when the designer simply improvises. Applicable use of braid circuit, parquet, Christmas tree, various ornaments resembling the traditions of Italian and Arab masters. But these options are some departure from the classic scheme. Here you can see various options for laying paving slabs blocks. It is also necessary to take into account some subtleties in laying this type of blocks that do not need to neglect. First of all, it is necessary to work only in dry weather, some time after laying the sidewalk it should not be washed, carefully clean her surface from cement residues, this tile quickly absorbs foreign substances and loses its appearance and color.

Prices for tile and its laying

The price aspect of the paving the old town is quite democratic. Depending on the manufacturer and the popularity of the color gamma, the price of a square meter may be as follows:

The cost of laying usually fluctuates several depending on the category of the company producing these works and other factors. Typically, the base value is 2.1 - $ 2.5 for laying one square meter tile. This includes the production of all the work, starting from the zero cycle and before commissioning.

In modern conditions, the assortment row of tiles Old Town is one of the most popular for the design of objects of different purposes. It is bright, diverse, has excellent durability and safety indicators, which is very important for regions with a long cold period. It is also important and the factor of the democratic price and simplicity of laying. Tile does not arrive in maintenance and repair. This makes it the most successful solution for the design and organization of various pavement coatings.

2gazon.ru.

Laying of paving slabs "Old Town" do it yourself + installation schemes

Paving slabs is the face of a residential building, public institution or street. It is not surprising that the tile of the old town is so common, and it loves a large number of buyers. It differs from other types of tiles originality, however, because of this, laying of paving slabs The old town has many variations that even hard to imagine themselves. A, adding the old city into the overall picture to the overall picture, you can create a more colorful look. It is worth considering the options for combining colors and styling.

Schemes of laying paving slabs "Old Town"

The scarf of this species is unique to the set of concrete tiles included in it. It consists of sets with dimensions:

tiles size 118 * 178 * 60,
tiles measuring 118 * 118 * 60,
tiles measuring 88 * 118 * 60.

In addition, this tile can be combined with the usual brick or other species - so you can reduce the project and make it even more interesting and original.

Preparation of the laying surface

Consider how to make the styling of paving slabs Old Town do it yourself.

Initially, it is worth making an objective assessment of the old surface.
Next, it is necessary to make accurate marking of the area on which the paving slabs will be laid, it is better to use the construction line - it is more reliable.
On the stretched fishing line, a place under the border is prepared, do not forget about the clearance of 2-3 centimeters, which will be used to accurate curb.
The curb itself needs to be fixed with a solution of cement sand in proportion 1: 4 is the most common and reliable combination. Immediately proceed to the base for the tile is not worth it, you need to wait for the clutch of the solution and border.
The base should consist of dropout or sand, which is added to the cement in proportions 1: 6. The finished mixture should be eliminated with a six centimeter layer and perfectly leveled. 6 centimeters of the mixture will perfectly cope with the drainage.
To avoid tile drawing after laying, the surface must be rich in water.
For the coupling of the sand, it is better to use a special vibropress, you can rent it. It is manual and mechanical, they have electrical or gasoline engines. Experts choose the vibropress (trimmer) mechanical.

Stages of laying tile

Scheme laying paving slabs Old Town will not create a lot of trouble, when working with a tile, you just need to monitor the pattern. There are several ways:

Rubber or wooden hammer. The tile is laid on its place and tamper;
Vibrotrambovka. The entire tile with the pattern is stacked, then the rubber sheet is paved under the tamper, and we go through all tiles.

Final stage - rubbing seams

For this stage, it is better to take river dry sand and with a brush everything is thoroughly mixed, but you can use the usual broom. After all moisten with water.

Be sure to fail in some places in some places and the procedure is to repeat again after a while. After passing all the stages, the tile will not be fused under the legs.

In such a simple way, you can get a surprisingly beautiful paving pattern, after which you all guests are with pride to say what the styling of the tile old city themselves!

For clarity, you can also familiarize yourself with the video instructions:

sandstone.BY.

Paving tile "Old Town": laying options, technology, layout schemes

Street, country and garden landscapes are drawn up today on modern trends. The design technology is distinguished by different techniques and a unique combination of shades, as well as colors.

Today it has become possible to use dyes and innovative raw materials that have high quality. This can also be said about strengthening materials.

Characteristics

Stacking Technology: Preparatory Stage

marking cord;
shovel;
ropes;
workman;
household broom;
level.

Algorithm of work

Stacking options: Installation on primer with the basis

Layout schemes

Alternative schemes

Thematic articles

highLogistic.ru.

Paving slabs "Old Town" - Preparation for work, ways of laying blocks

Rounded, small, diverse paving slabs "Old Town" are made of composite material, the forms of which resemble stones laid out on the bridges in medieval cities. Despite the fact that the latch prepared using the material is acquired by unique uniqueness, not immediately popular with the material. For a long time it was believed that the use of blocks uncomfortable, especially high-heel and studs. However, after adding to the standard gray and brick colors of other colors and shades, the paving slabs "Old Town" gained popularity and interest in it.

What does finish look like

Characteristics

Landstolding the territory of the site, paving a pavement under the name "Old Town" gives in the end:

unique patterns of stone, which are relevant for several years;
the possibility of wasteless use of purchased material;
the use of different shades of paving slabs that are fully combined with each other;
in order for the appearance and shape of the selected part of the site to match the overall design of the facade of the house.

Concrete gray plates

Additional requirements are put forward to the sidewalk:

wear resistance;
resistance to temperature drops;
defined levels of moisture absorption.

Private territory

Finishing of urban square

The range, color gamut, shapes and sizes of paving slabs in different manufacturers have insignificial differences, but mainly:

the width of the elements ranges from 6 to 12 cm;
length varies from 5 to 18 cm;
thickness, depending on the purpose of the part, from 4 to 8 cm.

Patterned masonry

For the convenience of developers who want to perform styling with their own hands, many companies produce additionally blocks of trapezoidal shape, the use of which contributes to the reduction of clock waste during complex installation.

The cost of the tile depends on the parameters, so the choice of thickness allows you to reduce costs.

Details with a thickness of 4-5 cm are used on garden paths and sidewalks in private houses.
The technology of manufacturing blocks 6 cm thick allows you to withstand low-constracy traffic. Tiles can be put in public places with high patency.
Paving tile 8 cm is designed for use on the roadway and city parking lots.

The tile is manufactured by the vibratory method, and all sorts of dyes are added to it.

Assortment of colors and sizes

Wave-shaped masonry

Work on laying

The technology that laying the decorative sidewalk tile "Old Town" is so simple that a person with zero experience can lay out. Stop it better on a specially prepared basis, removing the roots of plants and trees.

Chaotic masonry

Plot to place, fencing with the help of pegs and construction line.
Before laying out the tile, install borders that hold from the spreading. Border can be taken a stone or plastic.
The fixation of border stone is produced on a cement-sand solution, diluted in the proportion of 1: 4 or 1: 3, depending on the cement brand.
After installing the curb, the solution is given 4-5 days to grasp.
Under the plates make the base from the stone crumb of fine grinding, mixed with cement in the proportion of 1: 6.
The crumb is smoothed and covered with sand with a thickness of 5 cm.
Sand pillow shed water and tamper.
A dry cement-sand solution is poured on the prepared base in proportion 1: 5, 1: 4. The height of the layer depends on the thickness of the tile.
The layout of the decorative paving slabs "Old Town" has 2 ways:

each item to score in the place of China, aligning the area in terms of level;
having postponing the entire area, to the vibrotambovka.

The track from the slab withstands the weight of cars

Color variations plates

In both cases, the main thing is to ensure that the level of tile is smooth, there were no sticking and failed parts.

Having finished the masonry, the tile fall asleep cement-sandy mixture. The composition is noticed in all the cracks between the tiles. Then shed water. The process is repeated until the slot disappear.

Masonry on the Egyptian motive

Options and laying methods

So that the tile fit into the plot ensemble, it is necessary to plan in advance, options and scheme of laying paving slabs.

Plate textures

There are basic design forms that can be performed with their own hands. Varue depending on the desire of the developer.

The tile pattern is similar to the ancient laying. For this, the paving slabs of the corresponding color and shape takes.

Laying a symmetric pattern

It looks good, ways to combine multiple colors, arms located or smoothly moving one to another.

Laying Zigzag

Masonry technology is the same. The color scheme is selected depending on the landscape. The gray tones of sidewalks are less and better masked dirt.

Samples

On the technology of work on laying plates, you can learn more from the video:

In contact with

Necessary products

Only more than 200 products in the catalog

laminatePol.ru.

Paving slab options Old Town

In the ranking of finishing materials, the paving slabs Old Town confidently keeps the top position due to the original design. There are options for laying with longitudinal, transverse seams, chaotic location of the paving. Compositions are diluted with colored stones, patterns and patterns.

Blowing elements Collection Old Town

With the improvement of the territory in the courtyard of a private house, paving slabs Old Town provides the developer the following advantages:

economy is the lack of cutting waste, the budget value of the material, the lack of operating costs;
design - For the Collection, the Old Town There are ready-made layouts, drawings and ornaments, allowing to improve the exteriors of the building facades, as in the photo below.

Important! For some modifications of FEM (for example, "clover", "rhombus") manufacturers produce good elements of "halves", which are almost like a whole tile, increasing construction budget. For the collection, the Old Town does not work these rules, as it consists of the default tiles of different format.

Collection The Old Town consists of several tiles of different magnitude