When glazing with plastic, the urgent question of many owners is how to adjust the plastic balcony door. In fact, it is not necessary to call masters - this can be done independently, following the existing rules. To do this, it is enough to explore the design of the door, know its device and the main details, as well as the principles of fittings.

Any balcony door has a set of components whose quality can affect its use.

Main elements:

• The door frame from thermoplastic polymer profiles, which are fixed with special fasteners;
• The sash, manufactured by the same scheme as the frame;
• Handle for sash;
• Door hinges that can withstand the weight of the entire structure;
• Castle in order to close the sash in the clamp state;
• A seal that protects against draft, as well as absorbing noise;
• Plastic glass;
• Door threshold, which can be made of steel or aluminum, sometimes enters the design of the door frame.

A set of fittings can be supplemented with such elements like a stopper, hydraulic, pneumatic or door closer.

When using a high-quality door can be stopped for about 20 years, and is designed for more than half thousand openings and closures. Of the 3 grades of strength A - the most durable view of the door.

This speaks of high resistance to dynamic and static loads, as well as reliable welding of angles. The design can be glazed partially or made solid.

When the balcony door is needed

The plastic balcony door can be adjusted with their own hands. If there is a clear instruction, you need to adhere to professional instructions.

The adjustment will be needed in the following cases:

• The balcony door cannot be closed if it is not fixed by the lock;
• The device opens with great difficulty and requires the use of force;
• The door hits the frame when closing;
• There are cracks on the double-blade;
• The cloth during operation publishes creak;
• Despite the fact that the door is tightly closed, the cold mass of air blows into the room.

It is sometimes difficult to understand when something is wrong with the web. To check if it is normal, it is functioning, you can spend such a test:

Put the sheet of paper on the frame and, closing the door, try to pull it out. In the place where it stretches freely, insufficient tightness, which means that the setting is required.

Causes of troubleshooting: how to regulate plastic balcony doors

To regulate the work of the door leaf itself, you need to identify existing problems and eliminate their reasons.

Types of breakdowns are different:

• Damage to the box and shift it in the side;
• Gaps between the canvas and the box;
• The door asked under his own weight, and hurts the lower threshold;
• Too tight clamp, breakdown of the castle, its incorrect work;
• Broken handle mechanism - she is inspired due to the incorrectly assembled.

The causes of these deviations there may be sharp drops of high and low temperatures. As a rule, it causes a weakening of the device. When the rooms are conducted, the door can remain in the open. Since the web is suspended with a suspended form, an increased load is underway on the loop, which causes them to be recalled and weakened.

Also jammed balcony doors from PVCs may be due to the fact that the sash freezes, because condensate accumulates between it and the box.

Shrinkage of walls, if the house has been built recently or incorrect installation of the canvas can lead to distortion.

What to do when the balcony door is bad closed

The most frequent problem of metal-plastic doors is to send them under their weight, and as a result, the weakening and deformation of the loop and the overall distortion of the entire design.

Repair is necessary in the following situations:

1. If the plastic balcony door closes a loosely, the problem may be associated with the deformation of the sash, sagging it on the loops, breakdown fittings.
2. It should be found how it closes and does not touch the threshold. If this happened, most likely, the sash kicked under its weight and metal-plastic design should be repaired.
3. Due to the temperature differences, the door can be damaged in the middle part, and it will touch the box.
4. When the distance between the frame and the sash is formed, through which air passes, you can talk about damage to the clamp. In such cases, you need to pull the door.

Fortunately, all work can be carried out independently, without resorting to the help of qualified masters. It can be done quickly and economically.

Tips of professionals: how to adjust the plastic balcony door on the press

Adjustable the strength of the cloth of the balcony door with the help of special shut-off parts located on the door leaf. They are made in the form of a TACF or eccentric.

Differ:

• Round;
• Oval.

Such elements are used for both plastic balcony doors and windows.

To enhance the clamp, the mounting hex key is inserted into the center of the eccentric and rotates a few millimeters. In addition, you can use pliers.

After work, it is necessary to check the door to the adjacent. When regulated, it should be paid to all the details in the same way.

Adjustment is carried out, usually twice a year. If for the summer, the clamp must be loosen, then it makes it stronger for the winter. In this case, the sash is tight pressed against the door box - frame from the loop side using screws on both hinges.

To properly build the work process, it is advisable to use the setup scheme. You can get information on this issue at the manufacturer of the manufactured accessories.

Basic rules: how to pull the plastic balcony door

First of all, the cause of the problem must be clarified, and for this purpose, the doors and seals are inspected. The sash can be overwhelmed, and on the material of the sealing the traces of deformation will remain, the handle device can also function well.

In such a situation, you will need:

• Adjustable key with six faces (3-4 mm);
• Plastic linings.

First, you need to move the angle of the canvas in any direction, after which the decorative plug is removed from the top loop. Next you should pull the screw of the loop. Fold, while fixed horizontally. To move the bottom door corner, the plug is removed in the same way.

When the seal is damaged, it is desirable to raise the sash, and adjust the loop adjustment in a vertical position.

Attention! When lifting the sash, the screw rotation is used counterclockwise, while movement is applied clockwise.

In cases where to adjust the plastic door with the help of loops, you can do the following:

• Deletes fasteners - special strokes for holding brakes in the door frame;
• There is one or more gaskets between the plastic profile and the glass.

This operation is carried out very carefully not to damage the device.

Prevention of problems: blows a plastic balcony door

Plastic balcony door can be used for a long period of time if it is necessary to care for it. It will also save on constant regulation.

Preventive measures:

1. In order for the euro door to do not save when it is closed, you should purchase a microlift. This device will additionally support the cloth. Especially recommended a glass unit with two cameras.
2. The limiter will be needed to control the width of the door of the door - it will be possible to open it only at a certain distance, which will not allow the loop to be cleaned.
3. The materials of the sealer need periodic lubrication with silicone means. This will prevent the device attenuation at critical temperatures and allows you to use it for a long time.
4. In obligatory should be lubricated and the mechanism of the castle. The handle should rotate freely, but not to be broken.
5. An important element of the fittings is the latches on the balcony door - they are necessary in order to open the door outside and closed without the efforts.

Such a retainer will prevent the heat loss in the apartment during the cold season, especially if the owners often go to the balcony.

Adjusting plastic balcony doors independently (video)

Any problem associated with the plastic door of the balcony can be solved by its own, without referring to expensive repairs using qualified masters. But for this, it is necessary to get acquainted with the instruction that is attached to the kit of the fittings, and with the scheme of work produced, since, otherwise, it is possible to damage the product, after which the warranty period of service services will not be available. And there are cases when professional assistance from specialists is required.

Plastic doors are widely used in homes, apartments, offices and shops: they are used as balcony, interior, input. This is an excellent alternative to wooden doors, and such products are better protected from noise, dust, have a large margin of safety. Over time, it may be necessary to adjust the plastic doors. , which is not difficult to do on your own.

When is the adjustment required?

Even if you did not save on quality and purchased a dear from the proven manufacturer, this does not mean that in a few years it will not be necessary to adjust the door. This problem is connected with many factors:

• Shrinking building.
• Incorrect installation.
• Incorrect operation.
• Sailing design from its own weight.

In order to know exactly how to adjust , you can watch the installers. Over time, this skill can be useful.

About what is required to adjust the doors, you can find out if there are drafts, the door began to open or closed, stopped being parallel to the box. To determine how densely the design is fit, you can use a regular sheet of paper to be placed between the door frame and the frame itself. With hermetic closure, stretch the sheet will not work. If it comes out easily or falls out, then the adherence in this place is weak.

The sash could move due to frequent temperature differences, weakening the door mechanism, because of which it begins to touch the frame elements. Adjust the plastic door is necessary in that situation if it hits the threshold when opening it. When tuning, look at the handle: it can hang out, depart from the socket, also require the setting. The canvas may be loosened to the frame and due to the wear of the seal, which will be required to be replaced.

Having defined a malfunction, you will understand what kind of plastic door adjustment is independent; Instructions for all actions are easy and accessible to any owner. You can adjust in three directions, for this you need to prepare the tools in advance. We need two screwdrivers: flat and cross, hexagon, tape measure, plastic strips, pliers.

Properly adjusted door must be stable in any position.

Vertical setup

The loop adjustment occurs with a special screw that is on them. With its rotation, the door will fall or climb. Such a method is used if the sash hits the threshold or the seal in the lower or the upper part has a dent.

Before starting work, you will need to remove the plug with the adjustment screw, which is located on the bottom loop. It is located along its axis. You can rotate with a hexagon. When the mechanism is rotated clockwise, a rise will occur in the opposite direction - lowering the web.

Setting the plastic balcony height

Horizontal setting

This type of setting is needed if the cloth has resulted. Most often this is due to the large mass of the design. Adjusting the plastic door in height occurs when the sash is open. To do this, unscrew the screws from the upper loops, after it is required to close the sash, remove the lining on the loops, covering screws for adjustment. The setting takes place using the longest fastener element located in a horizontal position.

If there is a skew, you will need to pull this screw on the upper and central loops; The one that is located above should be kept stronger. If you do not know how to pull the balcony plastic door so that it gets up smoothly, relax all horizontal screws and adjust them together.

Adjusting the door leaf horizontally in the upper loop
Horizontal door adjustment in the bottom loop

Debugging

It is necessary to know not only how to adjust the plastic balcony door independently , but when you want to do it. For example, clash must be controlled constantly, and not only when you notice the problem. In the summer, plastic expands due to high temperatures, so we need to weaken, in winter, on the contrary, it must be enhanced to eliminate drafts, as the expansion will cease to occur. The device of the plastic door to the balcony is quite simple, so only the hex key will need to work. Find a locking type axle. On this design element there is a special notch that will help determine the degree of pressure density. Rotate serifs to the frame will provide a weakening in the opposite direction - gain.

If the position of the screws serving to adjust, extremely, this setting will not be effective. In this case, you will have to resort to debugging the position of the glass package. Pull the strokes that fix it, install gaskets in the right places, you can do it with a special device - blades. From the skew will be able to get rid of the right place for laying and taking into account its thickness. After this stroke can be returned to the place.

Adjusting the climate clamping

Replacing the seal

If the adjustment of plastic doors was not independently carried out for quite a long time, and the door was operated with distortion, often the noticeable deformation of the sealing material happens. It will be necessary to change: buy a new one in the construction store. Pay attention to the form and cross section of the acquired material - they must coincide with the old.

You can remove the sealer from the groove from the groove, using a flat screwdriver. Remove contaminants, glue growths, apply a new layer, insert the fresh seal in such a way that it does not stretch and not provis.

Debugging of the state of the handle

These products can break out or, on the contrary, turn a tight, not allowing the door to open normally. In the first case, the adjustment of the inlet plastic door is carried out with the help of screws located on the handle. To do this, you need to remove the protective pad, tightening them with a screwdriver.

The second version of the problem will require other efforts. To eliminate the problem, you will need to adjust the door leaf. How to adjust loops on plastic doors , described above. If you put the web correctly, but the handle defect does not disappear, it will be necessary to replace it. It is easy to do: you need to unscrew two screws that keep the product, pull out the handle, put a new one and fasten the screws into place instead.

Adjusting the knob

• In order to protect the door from damage and get rid of the need for frequent adjustment, you can install the opening limiter. This device will protect the loop from breaking, as it will not give them to touch the door jamb.
• Another useful device is microlift. He takes on the weight of the door canvase in the closed position and does not give it to be saved.
• To extend the service life of the seal, it needs to be treated with silicone lubricant.
• It is impossible to hang anything on the door handle.
• All parts of the opening mechanism must be regularly lubricated

Compliance with these uncomplicated rules will extend the service life of the door, avoiding frequent adjustments.

Balcony doors are very heavy, so quite often sag. The door stops tightly closed, and it starts blowing through the formed gaps. If the warranty service life has not ended, experts can perform work on adjustment. If the deadline has already expired, you will have to adjust the stamped plastic door yourself. It is simply adjustable to the balcony door with your own hands, if you have the necessary tools, and clearly follow the instructions.

The balcony door of the plastic profile performs several functions:

• the possibility of accessing the balcony;
• protection of the room from noise, dust and drafts;
• excellent daylight source.

The fact that the door over time saves may be due to the poor-quality installation. During installation work, it is recommended to monitor the actions of workers so that they are on the spot and hot pursuit eliminate all the flaws.

If the door is installed correctly, it is tightly adjacent to the door frame all over the perimeter of the profile of plastic. The sash, located in the vertical direction, should not be shifted. When the door is open, the sash should not spontaneously open or, on the contrary, close.

It is necessary to proceed to correct the faults after their detection.

When do you need to do the door adjustment?

To check the closing density of the plastic door, you need to take a regular sheet of paper. It should be put on the frame of the optic door, and then it is necessary to close it tightly. Now the leavek needs to pull over. When pulling out a sheet, you need to see, in what place it is easily removed. Easy pulling sheet means that the door in this place is closed loosely and needed adjustment of the cloth of the balcony door.

Such a simple way will allow you to identify malfunctions related to the correct work of the door. It is necessary to start an independent adjustment of the plastic door after the warranty service has ended.

Tools for work:

• plastic gaskets having different thickness;
• M-shaped hexagon by 4 mm.

Adjustment of plastic balcony doors instruction

1. It is necessary to identify the problem of bad work. First you need to explore the rubber seal. If it has deformed places, it means that in this place will shift the sash. The cause of a loose closing of the doors can serve as a handle, it can rotate badly.
2. To shift to the left or right, the top corner of the balcony door, it is necessary using a hexagon key to pull the adjusting screw that is in the upper loop. Previously need to remove the decorative plug. To adjust the horizontal position of the door, it is necessary to rotate it around the bottom loop to the right or left.
3. When adjusting the lower corner of the door, it is necessary to remove the decorative plug from the bottom loop. Adjusting screw pulls up with a hex key. To adjust the door in the horizontal direction, you need to turn it around the top loop.
4. If the rubber seal was laughed, it is necessary to raise the sash slightly. Hex key should be adjusted to the lower looping group. The position of the door is vertical. Adjust the upper loop in the event that the seal is deformed at the top. To lower the sash, you need to make movement key clockwise to raise - counterclockwise.
5. The loop adjustment may not bring the expected result. You can take several plastic pads and put them between the frame and the plastic profile.

Homemade masters can cope and independently, as the adjustment of the balcony doors with their own hands is not such a difficult job. If you are called specialists to perform work, do not hesitate to ask them a few questions. Their answers will help you in the future adjust the balcony door without much effort.

Adjusting plastic balcony doors video

Adjusting the balcony door with your own hands: Step by step instructions

PVC is in great demand among consumers. This is not surprising, because such doors have demonstrated practicality and high quality indicator. But, like any mechanism, they are characterized by breakdown. Of course, this is not a reason to buy new, it is enough to carry out repair work.

Adjusting the balcony door requires certain skills. But after reading the detailed guide and reviewing the video on this topic, you, in most cases, cope without the help of the wizard.

The adjustment of the plastic balcony doors is easy to perform yourself

Types of damage PVC doors

In order to understand how to adjust the balcony door, you need to have a clear idea of \u200b\u200bthe faults that you encountered. Among the most common breakdows of the device are distinguished by the following:

• Schedule doors. At the time of closing the door hurts the edge of the frame - plastic threshold. The main reason for the problem is the burden of design. As a result, the door begins to sign from its own weight.
• Handle sharpness. Popular view of the breakdown. During operation, users are often closed and open the door, set the microwing mode, which becomes caused by the failure of the door handle.
• Door sash faults. The glass is characterized by good quality thermal insulation, but often users complain about the appearance of drafts. This is due to the fact that the sash is not tight pressed against the frame.
• Shift sash. The main factors affecting the problems of this type are temperatures: drafts or weak loggia insulation.

PVC Door Regulation: Step-by-Step Guide

Adjusting the balcony doors - the process is not from the lungs. But adhering to detailed instructions, you can fix the problem yourself without causing a wizard. In the process of repairing, you need patience and several auxiliary tools: hexagon and several types of screwdrivers.

Schedule Doors PVC

If the balcony door is difficult to close or touches the threshold, then you need to lift the loops with a lifting of the sash to its original position. To implement the conceived, follow these steps:

1. Wide open the door.
2. Remove the cap from the top loops and insert the hexagon. Next, do 3 turns in the clockwise direction.
3. The identical procedure must be done with the bottom of the door.
4. To adjust the upper screws, remove the plugs and turn the screw that is located under them.
5. At the end, close the sash and check the functioning of the doors. If necessary, repeat the procedure.

Loop control can be performed according to this scheme.

Shalyness knob

The years of operation of the balcony doors affect the state of the handle. The breakdown door handle, as practice shows, in contrast to other problems, the easiest way to bring to it. Enough to perform the following steps:

1. Turn the decorative lining at the bottom of the handle, approximately 90 degrees.
2. Using a screwdriver, twisted the bolts.

If the procedure did not give results, the likelihood that the crack was formed on the housing of the handle. In this case, the mechanism is subject to replacement.

To strengthen the handle, tighten the screws enough

Door sash faults

In the event that you feel the draft, you need to adjust the shut-off mechanisms that are located in the height of the sash. To do this, follow the instructions:

1. Mechanisms located on the sash must be wrapped up to the clamp using pliers or screwdriver.
2. Conduct the procedure once every six months. In winter, twisted for amplification - in a horizontal position, and in the summer, for weakening - to vertical.

Adjusting the door pressed by turning special elements on the ends

Shift sash

If you notice that the sash begins to scratch the frame in the center, then adhere to the following recommendations:

1. To shift the sash to the hinges, you need to lower it to the bottom loop.
2. Using a screwdriver and side screws pull up the design.
3. If the procedure turned out to be unsuccessful, do identical actions from the upper loop.

How to avoid faults balcony doors

As practice shows, most users begin to wonder how to adjust the plastic balcony door exclusively in those moments when faced with real problems.

In order to eliminate the breakdown of PVC doors, you need to adhere to simple recommendations, among which it is advisable to allocate the following:

• Verified firms. Thinking about the acquisition of a balcony door, pay due attention to choosing manufacturers. Prefer only to proven companies. Otherwise, you may encounter manufacturers whose double-glazed windows are made of low-quality materials.
• Compatibility of mechanisms. Choosing the doors, check the components. According to experts, the weight of the design and additional accessories should vary within 130 kg.
• Protective mechanisms. If you prefer heavy glass windows, for example, two-chamber, then the rational will be the purchase of microlift. The device will exclude the savings from the same weight.
• Limiter. In order to eliminate the seas and the door sewage can be purchased a special opening limiter.

Thus, adjust the balcony door without third-party help is a feasible task. Enough to read the useful tips and view the auxiliary video, which displays information about the intricacies of repair work.

The list of functional adjustments of the plastic balcony door, their features and methods of adjustment. The main problems of incorrectly configured doors and options for their elimination are described.

Adjusting the balcony sash overlap

Adjusting plastic cloth accessories

To be able to properly configure the plastic fabric should each owner of a typical design. The need to intervene in the structural component of the door may occur from the first day of the installation, as well as in the subsequent years of its operation.

After all, often in the summer season, the door to the balcony is constantly being left open, which leads a small but tangible web-saving, which can spoil the door frame, and, in the end, making the closing of the structure is impossible. It is possible that the manifestation of sludge gaps and drafts, with a dense sealed position of the door, which poorly affects the insulating capabilities in general. So, a brief excursion is needed in the essence of the setting, which allows you to establish the correct operation of the door mechanisms.

G-Obada key "Hexagon"

Adjust the canvas without the required required list of tools will be quite problematic and will take a long time. So you need to have at hand:

1. Mr Obaase Key "Hexagon" 4 mm, and better fully all set (as screw sizes can be different);
2. Pliers (for the turn of the eccentric);
3. Cross screwdriver.

Setting the position of the plastic frame

Adjusting balcony sash

The beveled door canvas can be adjusted by linguing the loops. The number of loops on a typical design is usually no more than two pieces. The lower loop adjusts the sash in four directions: left, right, down, up.

In order to adjust the lower sash, namely raise or omit, it is necessary:

1. From the outside of the door to detect and remove the protective hinge cover;
2. Determine the desired screw at the top of the loop;
3. Turn the key to raise the sash (turn clockwise), or omit (twist counterclockwise), to its preference.

This type of setting is used to eliminate the scarring in the lower and upper part of the web, due to its raising or lowering.

Adjusting the bottom loop

Adjust the bottom loop, moving the sash to the left or right as follows:

1. To begin with, find from the inner (or rather lateral side of the door frame, the required mechanism. It is very clearly visible when opening the door;
2. Further, the same hexagon key adjust the departure to the left (sorceressing counterclockwise) or to the right (in a clockwise direction).

In this way, you can optionally be able to adjust the position of the web relative to the vertical, and avoid lateral wiping. This mechanism should work in parallel with the upper loop, which also contains lateral adjustment.

Regulation of door loops

Adjusting the upper loop is similar to the adjustment of the lower, but fundamental difference is the placement of the twisting mechanism directly on the side of the web, this is due to the "ventilation" function at which the door bends forward, keeping only on the lower loops and the fixed device. On the structural feature of the glass package, also influenced the "Slotting" function, activated by the rotation of the handle by 45 degrees. Its essence is to safely ventilate the room, with closed locks.

You can get acquainted with the adjustment on the officially filtered video of the manufacturer.

Setting up a door shifting

Setting

Depends on the adjustment depends on how much the door leaf is closed. To check the clamp, it is necessary to carry out a small but important test:

1. An ordinary sheet of paper is taken;
2. It is placed between the sash and the door frame, so it would be possible to interact with it;
3. After closing the door, make efforts to extract it;
4. Repeat the procedure on all sections of slamming.

The result of the test is considered successful if the control paper is pulled out with some effort (too strong clamp is not desirable, since the sealant is quickly wearing). In another case, if the sheet is freely pulled out, either does not hold it at all, it will be necessary to set up the door closure.

Clamping is carried out using a special side fitness, or rather the eccentrics installed there. Pressing the closure adjust the eccentrics, the number of which depends on the component of the canvase. Usually there are no more than two or three pieces.

Plan adjustment of standard (oval) trough the following:

Adjusting the RACF

1. The zone is analyzed (or everything cannon in particular) where the sash is loosely closed;
2. The search for the required eccentrics in the desired area of \u200b\u200bthe door fittings is performed;
3. We clamp the supplies of eccentric, we turn it into the left either right side, relaxing or reinforcing clamp, respectively.

The troughs may have a completely different form and design, but the meaning of adjusting the closing clamp one is a swivel mechanism that increases the range of the trough from the drive center. Thus, approaching and removing (depending on the side of the scrolling), the leaf from the door box. The adjustment can be conducted by a hex key, a screwdriver, or just with hand, it all depends on the type of axle that the following varieties are:

• Mushroom-shaped eccentric;
• Cylinder eccentric;
• Eccentric under the asterisk;
• Roller eccentric (hand adjustment).

On the rotary frames there are so-called hidden loops that carry out clamping from the door of the door box. In the loop there is a special screw under the hexagon, the turn of which is permissible to push the pressure closer or further the opposite part, thereby increasing or reducing pressing.

1. Adjusting plastic balcony doors should be carried out and adjusted at least twice during the operational year. Especially in winter and summer periods. Clamping must be as follows: in summer - weak clamp, in winter - strong. This will extend the life of the sealer.
2. Competent care for fittings, actually, as important as the installation of a balcony door. Often after installation, forget to spend thorough cleaning of all surfaces, especially the top of the fittings, as a result of which the door will deteriorate, and does not close properly.
3. The door closes, but the rotation of the handle does not reach the end. Remedy method: adjustment of fittings, lubricant, cleaning.
4. Viewing the provided video on the Internet spaces will slightly facilitate the understanding of the essence of the regulation of structures created from plastic. All adjustment of plastic balcony doors is visually described in training videos, Internet benefits. Quality video will give a real idea of \u200b\u200bthe essence of the setting.