In this article, consider the topic of manufacturing classical furniture of almost all apartments and houses - with your own hands. This chair from the wood array with armrests will not be bulky and the best use of such a product is canteens. According to this instruction, it can be done at home.

The manufacture of the chair will take place in several stages. All of them will be presented below and you can easily make it in a few evenings in the presence of tools and materials, because all the schemes will be presented below. The finished drawings in this article will not be, since everything is done from the primary means: from the boards, bars of plywood, which is in stock.

Frame

Let's call this stage - the skeleton frame.

Of course, almost the entire skeleton will be covered with foam rubber, cloth. Only part of the legs will be visible.

The rear legs are the most important parts of the tree chair, because it is necessary to make them at some angle.

Without thinking for a long time, for the manufacture of the back of the chair's design, we took the usual dining chair, which was available, although he was without a seat. But he went well for the role of the template. You can take some old grandmother's chair.

On the board 50x150 made marking.

Be sure to mark the level of location of the seat of the chair, make it the same as at the stool. In this case, it was about 410 mm from the floor.

To cut the legs of the homemade fireplace armchair, use the electrolovka.

Then we used the finished part as a template to make three more legs, because we are doing two chairs at once with your own hands from girlfriend.

The front legs will be straight and square sections - 55 × 55 mm. To obtain such a section, you can glue the boards between themselves, and then sculpt them to the required size. We glued 2 pairs of 2 boards width 120 and a thickness of 30 mm.

Between 2 and 3 there is no glue

Note. The chair having a solid design is called a frame chair.

While the front legs are dried, we finished assembling the backrest frame - made the top part, in which the upper part has a slight rounding. Then they made the rear crossbar of the seat support.

Assembled all parts of the back using a 60 mm self-tapping screw. Before screwing the screws, you need to apply joinery for all connections, drill mounting holes.

The mounting holes are also called with auxiliary or guides. They are necessarily drilled so that the self-tapping screws do not go to the side and that the billet does not give a crack. The diameter of this opening is approximately equal to the diameter of the self-press, screw.

We continue to make our wood chair with their own hands. Billets for the front legs glued together and dried. I will describe them to the required size of 55 × 55 mm.

Put them on the design of the back and check the length of the legs and whether they lie on the same surface so that the chair does not fall when used. If different lengths, align them.

The ends of the front legs need to be pressed. To do this, make small sites from all four sides.

Make side crossbars with a length of 400 mm and secure them as shown in the figure below. For better fixation, it is desirable to use screwing screws at an angle, pre-manufacture auxiliary holes.

Install the front seat of the seat support. It is the same length as the rear crossbar.

In order for the English chair with the ears strong, we prepared four details, the ends of which were cut at an angle of 45 degrees. We glued and secured them with self-draws in the corners of the frame.

Then they dug a piece of plywood under the size of the seat. Plywood thickness 18 mm. They secured them with self-draws, applying the glue.

If you want to make the seat softer, then instead of plywood you need to use furniture textile tapes. We will use such tapes in the manufacture of the back.

The chair must be with armrests, otherwise it will be a chair. Consider the stages of their manufacture.
The front rack and crossbind of the armrest must be installed at right angles. The height of the armrest is determined by itself, it will be equal to 200-300 mm. Section of square bars - 50 × 50 mm.

Secure them with self-draws by screwing them at an angle.

The classic armchair should be with the "ears". For their manufacture, prepare for each side the board and the bar of the same thickness. Examine all photos of the process of manufacturing "ear". Connect the blanks with self-drawers, then draw the rounding and cut down the lines. Fix the finished assembly to the back and armrest.

For the right side, use as a template, left "ear"

You might think that make a chair with your own hands is not such a simple task, but I want to assure you that the most difficult is left behind.

Before proceeding with the upholstery, a slightly strengthened the frame - add crossbars on the back and armrests, as shown in the photo.

We will add a bar aligning the surface of the armrest, the raffled it and soda.

Upholstery

Now you can start the upholstery process.

Cut in the size of the seat foam rubber 50 mm thick, glue it to the surface of plywood.

Secure horizontal textile straps on the back of the chair using a construction stapler, and then vertical.

Take a 10 millimeter foam rubber cut from it a piece that will be more than the seat area by 40-50 mm.

Now cover the furniture cloth on top. Then using the furniture stapler, fasten the case, syntheps and foam rubber to the design of the seat seat on all four sides.

Burry the foam rubber with a thickness of 25 mm on the sidewalls and armrests of the chair. To bypass rounders, make several cuts as shown in the photos below.

Then remove everything too much.

We continue the consideration of the topic how to make a chair the mantel with your own hands. Furniture fabric rear need to secure, as shown in the photo.

In the front of the seat, we made a cut so that the cloth could be beatered and secured.
Overview of the intermediate stage of the manufacture of a chair without drawings.

Then we covered the sidelines and armrests. To secure the synthet board, it is better to apply an aerosol glue to the bonding occurred throughout the surface.

Wrap a cloth almost the finished chair with armrests.

And on the front, in the junction of the armrest with the seat, we make pot at an angle.

See how fastening the casing with the inner invisible part is excessively cut off.

Most likely noticed that the sidewall itself was not covered. Because for this we will use a separate piece of fabric, it is easier to adjust all the bends and roundings - we are all doing this at home.

But the appearance outside and what will remain in the invisible part.

Finally, we got to the back. We use the same foam rubber (25 mm thick), syntheps and pass all the steps that were made with armrests, sidewalls.

We close everything neatly cloth.

Video about how to make a chair Chester with her skin coated hands

Before sheeling the back, remove all the excess, cut the fabric, thread. Nothing should remain advocating for the framing.

To give the volume and completed look, we need the back of the wooden chair to be beautiful and smooth, for this I will fix straps and on top of them lining fabric, as shown in the photo.

In the manufacture, we do not use the drawing of the chair with the exact dimensions, we all do in place. But if you do 2 or more products and want everyone to be the same, then on the basis of the first chairs, do all the necessary measurements and transfer them to paper.

Secure the syntheps and then cloth on it.

Closeup back of the top of the back.

We offer to watch videos with different chips and useful tips. Video in a foreign language, but it is understandable.

Sofa chair do it yourself master class

Fix textile straps from the outside of the sidewalls and armrests. Then close the cloth.

Then we attach the cloth along the back edge.

Catch the picture of the fabric so that the picture is in the place of folding did not have any overlay.

How to sew beautiful corners of the fabric

Examples of seats

Make a circular chair with your own hands you can also

Wooden sofa

Wooden chairs do it yourself. Examples of independently manufactured products

Materials:

• one chair;
• a small sheet of plywood, 2.5 cm thick;
• foam;
• batting;
• fabric for upholstery.

Equipment:

• roulette;
• screwdriver;
• a circular saw;
• grinding unit;
• a hammer;
• nails;
• staplers.

Here is the bottom seat, it is falling and slightly outdated. By the way, we have already shown earlier how to embellish the stool, with paint.

We want to take a look at how the seat is arranged, so starting it to disassemble. It can be seen that it is not one, not two, but as many as three old layers of upholstery fabric.

Wrong on plywood contour seats

After we circled the old seat with a pencil, we use the jigsaw to cut a new bottom of the chair. With the help of a circular saw weigh the edges of the seat, and we bring them to the perfect state with a grinding machine.

From the same plywood, cut out the side planks that will keep the seat in the chair. You feed it using usual, or as in our case a pneumatic hammer.

We supply a pencil foam rubber and cut it with scissors.

After that, under the foam rubber putting batting, we leave it a bit with a margin, on each side and engaged by the stapler as in the figure cutting off every side. When the stapler is frowning, try to slightly stretch batting.

Position the fabric under the seat, make sure the pattern is good and evenly located. Tension tissue and run through the edge of the stapler. Be sure to use enough brackets to prevent tissue tightening. Cut the surplus material.

That's all. A bright and colorful seat that will harmoniously look in the living room of a modern apartment and will serve for a long time in faith and truth.

We also have interesting offers from Camelgroup - Trevisio, Luxor Day, Milady, Leonardo are also equipped with comfortable and beautiful chairs that are fulfilled by Italian masters with a soul and a professional approach to every detail.

Interesting video. How to sew a cover on the chair.

In modern furniture stores you can find any subject of the interior for every taste and for any style. Occasionally, the financial situation or too high demands do not allow finding a suitable chairs in style and convenience.

That is why now you can find the instruction, how to make a chair with our own hands step by step.

What chairs can do it with your own hands?

On the Internet you can find a lot of instructions, how to make a chair, which is why it is forces to everyone, especially if you know how to use a standard set of tools.

First you need to buy everything you need, missing tools and materials, and then proceed to the creation of sketches and drawings of the future furniture subject.

The peculiarity of the chair is your own hands in the fact that the difference is what sketch you will use - no. There is a certain step-by-step instruction, whose items adhere to everything.

Before you begin work, you should familiarize yourself with the possible options for chairs and choose of interest. However, I note that some species are very difficult to do without special equipment, and for some you need a lot of experience. We also recommend you to see the master class, how to make a chair with your own hands.

Types of seats

If you have a question, what a chair do it yourself, then here is a list of all possible options that you can make yourself:

Usually armchair

The usual chair, it is also called soft. It consists of three main things: framework, upholstery, as well as filler. Suitable for installation in the house.

Folding wheelchair

It has a frame that can be folded and folded. This option is simply not replaced during the rest in nature, the sea or even for the house, if you have, for example, there are always a lot of guests, and there are not enough chairs at all.

Kentucky

Chair for garden or cottage. It looks great in the garden or at the cottage, easy to manufacture.

Ladle

The chair of the sports type, which can be installed several belts, thereby well fix the sitting on the spot.

Photon

Transformer chair, which is both a chair and a mattress. And this "transformation" is very easy to implement.

Sliding chair

Great for small rooms, due to the fact that simultaneously perform the function both beds and chairs.

Chair on small wheels

It is convenient to ride throughout the apartment or house. It will help in the household an elderly and sick people.

However, it is worth remembering that the wheels under the weight of the human body can leave scratches on the floor, especially if you have home covered with varnish parquet.

High Back Chair

It is perfect for people who are sitting for a long time, for example, at a computer, it does not matter by personal initiative or at work.

Due to the fact that it can be completely relying to him, it will be possible to sit in it much longer. It is also very comfortable. By the way, there are soft and solid options.

Rocking chair

Surely, the mention of this subject of furniture is associated with the elderly. However, this type of chairs helps many people, for example, with sleep disorders or infant mothers.

The latter are so not only scolding the child, but they themselves relax. For example, after a sleepless night, this is a great option, you will definitely believe that you do not drop the child by negligence due to fatigue.

The chair is not folding type

Very convenient to use, helps to fully relax and relax after a hard working day. Now their choice is huge, so you can not only make it yourself, but also search the desired option in the store.

Previously, the seats of non-folding type were very popular with the so-called ears, to which it was convenient to rely on and they also served as a kind of fence.

Bag chair

Probably the most comfortable armchair from the entire list. It has no framework, and inside there is a soft filler, which is able to completely repeat the outlines of the human body.

Due to this feature, it is really the most convenient and can relax, relax. Not only that there is a huge amount of these seats, and for its manufacture you will not spend a lot of money and strength.

By the way, if some type is not clear, then look at the photo of the chair with your own hands of this type. So you will not only understand what chair is we talking about, and you can also stumble upon a step-by-step instruction that you like the interior item.

So, today you have learned the best ideas of the chairs with your own hands, namely their types that you by the forces to do on your own at home. I hope you have no questions on the topic and you chose the appropriate type of chair.

Photo seats do it yourself

The vast majority of soft seats can be divided into frame and frameless. The mansion is children's chairs, the manufacture of which has a number of technological differences. The question arises - is it necessary to pay big money for the finished product if you can do something similar to your own hands?

We will tell about the process of making soft chairs, provide drawings, photos and videos that will enable successfully cope with the task. You are also awaiting a list of necessary materials and tools.

• 1 What will take?
• 2 How to make a soft chair with your own hands?
  • 2.1 Traditional soft product
  • 2.2 Chair Bag
  • 2.3 Children's chair
• 3 drawings and useful videos

What will required?

First of all, you need to decide on the upholstery material. There are significant differences in both the cost of upholstery and its physical properties. Consider the most popular options:

• Velours. Velvety and fearful fabric. Externally resembles an artificial fur.
• Shenill. Natural material, "diluted" synthetic fibers. Due to this, the surface does not roll, differs by practicality and durability.
• Flock. The fabric remotely resembles velor, but experts recommend using flock for the manufacture of children's chairs. The fabric is easily cleaned and clean, has water-repellent and wear-resistant qualities, does not fade.
• Jacquard. The fabric is easily cleaned and distinguished by increased strength, but the structure includes synthetic fibers. Therefore, the bloomed loops can lead to tightness.
• Artificial suede. The material is durable and durable, does not fade and knows how to "breathe". Easy to care - an extra bonus.
• Artificial leather. The material is characterized by high wear resistance. At the same time, the skin is characterized by embossing.
• Tapestry. It is a natural and very expensive fabric, to distinguish which you can apparently weaving. Multicolored threads, inserted into the general structure, form beautiful drawings.

The most primitive framework designs is the plywood pattern. Therefore, you will need birch plywood sheets, screws, nails and a standard set of tools.:

• protractor;
• steel line;
• compass;
• desktop and manual vice;
• scriber;
• files;
• manual scissors;
• a hammer;
• hacksaw;
• adjustable keys;
• soldering iron;
• pliers;
• desktop anvil;
• hand drill;
• chisel;
• sharpened;
• punch;
• kerner.

In the case of the manufacture of a chair, your toolkit is thoroughly reduced. In addition, there are simplified technologies developed by folk crafts, which allow you to collect a soft chair quickly and with a minimal set of inventory.

Photo of soft seats do it yourself

On wheels

Fallen

With knitted element

Low-seat

How to make a soft chair with your own hands?

Any work can not be started without a clear action plan. Decide with the design of the future furniture subject. Create a frame chair is more complicated, but it looks more respectable.

If you decide to sew a bag, get ready to master the patterns. Your actions will lie not so much in the field of furniture production, as in the field of sewing art. With any defold you will need an approximate budget and an idea of \u200b\u200bthe consumption of materials. For example, a chair bag costs 1200-1300 rubles. This includes fabric for outdoor (about 300-500) and internal (200-300) covers. Also 500 rubles are laid for the acquisition of filler.

Perhaps you already have an old "grandfather" a soft chair, which has lost its commodity look? Then you can drag and repair it with your own hands, as shown in the following video:

Traditional soft product

The usual chair requires a solid approach and an extensive preparatory phase. Consider a list of materials and tools required for the manufacture of plywood chairs with a soft upholstery:

• 20 mm plywood;
• electric drill;
• emery skar;
• screws;
• electrolovik;
• metal rims;
• thin nails;
• foam;
• carpentry glue;
• artificial leather;
• morilka;
• black glossy paint;
• pencil;
• painting tape;
• roulette.

Getting to work:

By downloading one of the drawings placed below, proceed to large-scale work. Calculate the number of materials and proceed to the manufacture of a template. Initially, cardboard templates are made, parts from plywood are cut on them.

The side parts of the standard chair resemble a banana. You will also need transverse strips. Decide with the angles of inclination, bending and product dimensions.

The surface of wooden parts is cleaned and polished. Special attention is paid to the ends - feed them with a preheated olifoy, flatten the fibers with a hammer (if the bends are provided). Each carcass detail is cut with an electric bike.

The side parts of the chairs are painted or processed by the veil. Side ends are strengthened with metal rims. After that, the tight process begins.

The electric drill is done by the necessary holes. The rims are fixed with screws. First, the back of the back is fried by artificial leather, then the queue of other fragments of the chair comes.

For fastening the fabric you will need wobbly nails with large hats. Rear the upholstery is fixed along the transverse parts (along the edge itself), it should cover the planks ahead. The attachment points are better to be treated with carpentry glue - it will increase the level of reliability.

Modern soft chair do it yourself

Bag chair

The simplest bag option is the so-called pear chair. You can not do without the following materials:

• hawk or satin (about three meters);
• cutout of fabrics for an external cover (about 3.5 meters);
• zipper meter length;
• filler;
• fabric for appliqués;
• scissors, pins and threads with needles.

Production:

Copy your favorite pattern from the Internet, increase its scale and transfer to the required details. For the upper and lower covers, work is to be done separately. The result of your efforts is a small top bottom, a big lower and six tissue wedges.

Complete wedges and proceed to sewing a bag. A small plot is required to leave an unimoice. In addition, both bottom are stitched. Having finished with the top cover, proceed to the sewing of the Nizhnya - the procedure will be similar.

From your chosen fabric you need to carve elements for applications - they are adjusted from above on the case. Lightning is sewn into one of the wedges - this will allow you to shoot a case and wash in case of contamination. Two thirds of the volume of the inner cover are clogged by the filler, which can be used by foam.

Dummy by filler inner case, to ingue it in an external one, and then zipper. The bag is fully prepared for operation.

Pay attention to the fortress of the seams of the inner case - they should not dispense under the influence of the mass of the sitting person.

About how to make a children's soft chair with their own hands, it will be discussed further.

Chair bag do it yourself

Baby chair

Make a frameless soft armchair for the baby as simple as the usual chair bag. The difference lies exclusively in the dimensions and coloring of this object of furniture. Bright cheerful tones are welcome, not irritating eyes and set up on a positive.

• You can make a soft frame chair for a child with your own hands in the form of a semicircular "sandwich" from wooden bars and chipboard. The front wall of such a design is made of plywood, rear - from the organity. The inner space of glue on the bending of the back is filled with the clermed pieces of cardboard.
• Waving to dry out the wall, hang irregularities with a building knife. Top neatly gluits a layer of foam rubber, to which the upholstery will later fall. As an upholstery fabric, you can use eco-leather or flock - these options will allow your design to survive in an unequal struggle with markers and paints.
• Now about dimensions. The standard adult chair has a meter height (some models reach 120 centimeters) with the diameter of the lower bottom 30 and the upper - 15 centimeters. The height of the children's armchair should not exceed 60 centimeters (the diameters will be 25 and 11 cm accordingly). Consider this nuance at the design stage of the pattern.

Frameless children's chair do it yourself

Drawings and useful video

In this section, we chose photos of the most successful homemade chairs that could find in RuNet. The process of independent furniture production is impossible to imagine without drawings, so we post detailed schemes and patterns for chairs.

Drawings Chairs for making them with their own hands

Inclined

In retro style

Fallen

With a soft pillow

You will also please the master class on the topic of the creation of a soft chair with their own hands. Watch the video, repeat the actions of the wizard and follow the technological standards described.

So, with the help of the film presented video, you will learn to make a chair-bag with your own hands, which has gained immense popularity in our country:

By the way, if you have erected erections, you can make a chair with your own hands and from such a material, and after only throw a comfortable soft pillow on the seat. Do not believe? See the following video:

Many people think that furniture production is magic, to comprehend the secret of whom is a simple mortal. Believe me, possessing a minimal set of tools, desire, care and perseverance, you can easily cope with the task. We presented everything you need - drawings, photos and videos, so dare and amaze close to your art!

In the modern world you can buy almost everything. The main thing is to make a choice among the widest assortment, which is offered in the store. But sometimes financial problems do not allow you to purchase a good product, for example, a comfortable high-quality chair. And some craftsmen simply do not want to buy a finished product and strive to do everything yourself. For such cases, there are special master classes for the manufacture of chairs.

What are the forces to create yourself?

Make an armchair at home can anyone, most importantly, be able to work with tools and enjoy fantasy. By purchasing the necessary materials and finding free time, you can proceed to the creation of drawings, work plans and the workpiece of parts.

It does not matter what drawing is applied. There is a special actions algorithm for the manufacture of a chair: creating parts, drilling holes for fastening, glue lubrication and varnish treatment. Next, the process of assembling the product, which occurs taking into account the plan.

Before starting work on the manufacture of the chair, you need to determine its type. Not all chairs are able to do on their own, and some are completely impossible newcomer.

Therefore, it is necessary to study all the appropriate options and choose the one that will definitely be forces.

Types of seats, subject to independent manufacture:

• Soft consists of a frame, filler and upholstery. This view is suitable for harmonious leisure where you can sit with an interesting book or with a coffee mug.
• Folding It consists of a lung, but a solid frame that can be folded for storage or transportation. This option will become indispensable when traveling to nature or at the visit of unplanned guests.
• Kentucky- Garden chair, consisting of bars and wire. It is quite easy in manufacturing a view that looks great in the country area.
• Ladle- This is a sports chair with good fixation, which is achieved due to the possibility of fixing multiple seat belts.
• Futon- A fairly popular model, which, from a comfortable chair with light movement, turns into a mattress.

• Slidingperforms two important features: a full-fledged bed and a comfortable seat. The perfect option for a small room.
• On wheelsit is capable of moving around the room due to stable wheels. On such an armchair you can ride all over the apartment, which may be necessary to elderly or sick people.
• With high back - Thanks to its design, in such an armchair, it is convenient for quite a long time. There are many models with a high back, among which there are soft and hardware.

• Rocking chair- Perfect option for peace and privacy. Such a "cradle" indicates any person, even with sleep impairment. This type of chair is very popular among young mothers, because it is convenient to swing the baby and relax yourself.
• Non-Store- Create good conditions for a full rest. For the convenience of users there are many models of unprofinal chairs. There were no time with the ears of the ears, which served as a side support for the head and at the same time were a fence.
• Bag chair- The frameless model, designed to relax the person sitting in it due to the fact that the product completely repeats the shape of his body. You can make a fluffy or leather chair that will look extraordinary. This option is the easiest for self-making, because it does not require the high cost of materials and forces.

Materials

The process of making a chair can be simple enough if you choose a suitable method and material. Create a work of art can also be made of girlfriend, and from the old clamshell. Some masters offer to create a comfortable seats from a chest or made of metal hoop.

To create a classic chair, usually use more durable materials to make a reliable framework. It can be made of timber, boards, plywood, willow, vines, logs, chipboard, LSP, metal and bars.

A soft frameless product will not require large temporary and financial costs. It can easily be made of fabric or foam rubber. It will not look worse than purchased, but will deliver much more pride for the work done.

Master Classes

Nowadays, you can find different drawings for the manufacture of both frame and frameless chairs. The master remains only to choose the appropriate option, which will justify all his expectations. After all, the drawing of the product needs to be chosen not only by the criterion of complexity, but also take into account whether it will harmoniously look at the place for which it is intended.

We present simple step-by-step instructions for the manufacture of chairs. In the next video you will see a master class on how to make an unusual chair yourself.

Soft chair

For its manufacture, you will need plywood sheets, soldering iron, hacksaw, hammer, meter, zirkul, iron scissors, drill, self-tapping screws, screwdriver, fabric, foam rubber and glue:

• You need to start working with cutting patterns, which will then be used to make parts from plywood. For the product you will need transverse strips, so you need to define their tilt in advance, size and bending.
• All wooden parts must be seized. The side parts need to be painted, and the ends to strengthen with metal rims.

• Poropolone pillows with glue must be fixed on the sidew and the back. If you wish, you can glue the foam rubber on the armrests. From above, the foam rubber is additionally fixed by the stapler.
• To cover the product, you need to do holes and screws to fix the rims. First, the tissue is finished the back back, and only then go to all other sections.
• To fix all parts of each other with the help of rotofituet and self-tapping screws. All joints and fastening sites are best treated with glue.

Bag chair

To create this simple version, you will need three Satina meters, 4 m fabrics for the cover, 1 meter of zipper, syntheps, scissors, threads, needle and pins:

• Using the pattern, you need to prepare parts from the fabric. There should be a big lower bottom, small top and six wedges. Wedges need to be searched and sew both bottom. By the same principle you need to sew the top cover of the product.

• Lightning must be sewn into one of the wedges so that the cover is comfortable to shoot and wear. 2/3 bags need to be filled with filler, after which it is possible to put it in an external case and fasten.

It is important to firmly flash all the details of both covers so that the seams did not dispense under the influence of the weight of the sitting man.

Frameless children's chair

The product for a child can be made from a bar or chipboard. The front part is made of plywood, and the rear of the organity. Inside the design, all the bends of the back should be sicked by pieces of cardboard. After drying the glue, all irregularities are equal to the construction knife. Throwing is glued over the design, after which it is rich in the cloth.

The children's chair is much less than an adult, so its dimensions should not exceed 60/25/15 cm.

Kentucky

To create a folding garden chair, you need to prepare self-tapping screws, round and rectangular rails, sandpaper, round profile, furniture and fabric:

• The work begins with cutting the rails and their grinding. Then, at a distance of 40 cm from their corners, holes are made, which are also grinding.
• To the back to change your position, you need to make 3 cutouts, then retreat from the rails and make holes for fastening the seat.
• Round rails are lubricated with glue and insert them into the holes.

• After assembling the carcass you need to do the pattern of the fabric. Its length should be calculated taking into account the further folding of the product. Therefore, first will have to fold the design and measure the fabric. Matter should be slightly stretched to sit in the chair in the chair steadily in it.
• Matter is fixed with the help of round rivers, after which its edges are cut off and fixed with small nails with large hats.

Chair-bed.

Backs and seats need to be made of plywood sheets:

• All items must be fixed with self-tapping screws, which must be fixed with glue.
• All wooden surfaces are grouped by sandpaper.
• Side backs are made from bars. They must have legs, handrail and five racks.
• The seat is made of three parts, each of which should have a frame from the bar.
• The sliding mechanism works with metal loops. So that he worked without interruption, you need to make gaps.

• The seats are connected by self-drawing on the plywood cloth with bars. All three seats must have the same size.
• Fasten seats with iron loops. The right-hand side of the bolts must be attached to the sidewalls so that it is steadily located in the same position when the chair will be moved.
• The legs are also fixed with the help of loops so that they can be hidden when the chair will have to be folded.
• All product must be covered with varnish or paint paint. And you can decorate the product with a foam pillow in a beautiful case that will be performed by a carriage tie. Some craftsmen surround the chair-bed of foam and cloth.

How to make a new one from the old?

To get a new comfortable chair and feel like a real designer, you can drag the old product. Having spent a little time and showing fantasy, you can get an updated thing.

For the hauling of the old product, you will need good scissors, construction stapler, upholstery fabric, chalk, foam rubber, gurts from jute and electron:

• First you need to change the old springs on the gurts from the jute. They have very good qualitative characteristics and increased strength. Jutes need to be sewed to the back of the frame in a checkerboard with a gun for furniture.
• So that the seat was soft enough, you need to prepare a foam pillow.To do this make the seat pattern from the fabric. With the help of chalk, the edges of the seat frame are outline and the foam pillow is cut out. Then it must be attached to the seat with glue and paper clips.

Sometimes the alteration of the old chair requires replacement not only springs, but also the backs and seats.Therefore, it is important to properly cut the product with a new cloth so that it serves a few more years. For this, the fabric is thrown onto the product and fixed with pins. All folds and irregularities should be smoothed, otherwise it will turn out an untidy and ugly armchair. It is best to remove armrests in the upholstery process. It is necessary in order for all the angles and places of fastening to be even and tagged.

For the upholstery, the sofa is needed a little more effort, especially if the restoration process produces a beginner. Therefore, to begin with, it is better to make a pattern of soft tissue, for example, from velvet, which is able to hide all the minor shortcomings.