How to insulate the Chinese metal door with their own hands. Tips on the insulation of the Iron Chinese Entrance Door

Attractive price encourages some to buy Chinese doors to install in private houses and apartments. And although such products are suitable for these locations, it is not the best insulation characteristics. If in the region the cold climate or the entrance has knocked glass, then sooner or later, the owners will have to think about how to insulate the inlet metal Chinese door. This can be done outside or from the inside. For each option, you will need your tools and materials.

Outdoor warming of the Chinese door

If the Chinese door is installed in the country, then its refinement can be made with their own hands without attracting specialists. Due to the minimum demands on the decor, given the place of operation, the warming of the Chinese door is carried out by felt. It is bought with a thickness of 4-6 mm in a roll. The color is chosen at will, but gray or brown is less dirty.

Works will be made from the room side to preserve the water-repellent coating from the outside. Before installing the insulation, the handles, their lining and eye are dismantled with the door. Attach the felt layer with glue or rivets. If the first option is selected, the material is cut out strictly in size sifted. Metal surface should be deguted and apply the glue "moment" around the perimeter of the canvas and make several vertical strips in the central part. By applying a sheet of felt, it is aligned along the edges and smoothed to remove swollen or irregularities.

If a rivet fixation method is selected, then the material can be cut off with a reserve of 20 mm to the side and turn it inside. It will look more beautifully visually and thickened the insulation site at the focus. The mount is carried out by a screwdriver with a thin drill, after which the rivet is immediately installed. Place them with an interval of 100 mm from each other. It will be necessary to perform two transverse rows so that the material does not shine in the middle.

How to insulate the chinese door from the inside

The insulation of the construction from the inside is more complicated, since the manufacturers initially did not provide for the disassembly of the canvas. It is assembled on electrosulatures using contact welding. But the painstaking work is justified by what allows you to preserve the attractive type of product, so important for the apartment. You can disassemble the Chinese door with the help of a grinder and a thin cutting disc, as well as a knife with a thick blade.

The process is performed in the following sequence:

On the canvas, the bolts retaining the loops and the sash disconnected.
It is put on a table or other elevation for the convenience of subsequent manipulations.
The design has two steel sheets bent into the box shape and connected by contact welding every 150 mm. From the loop side you need to find one such point of fixation and try to pass the disc between iron sheets to cut it. It is not necessary to deepen it - enough 2-3 mm.
Having trained at a convenient place in cutting, tapes should be done along the entire contour.
Then there is a knife between the sheets and disconnects them. It is necessary to act neatly, because the steel is very thin and easily deformed.
It is enough to bend three sides, which will open access inside and allow you to warm the Chinese entrance door.

After that, it is necessary to remove the corrugated cardboard, fixed by glue. Mineral wool is laid inside the sash, the thickness of which is selected based on the depth of the canvas. If the disassembly passed neatly, the metal sheet returns to the place and is fixed with short sticks with a semi-automatic with a wire of 0.8 mm at a minimum current. The ends after that will have to repaint.

In the case of severe thin steel, the sheet from the room is removed. Then inside the web need to lay a wooden bar around the perimeter, which is fixed with the ends with self-draws. Inside there are still a pair of rigidity. Mineral wool is laid between them. Outside it is closed by the MDF panel, but not more than 6 mm thick, so as not to create an excessive load on the fixation points of the wooden part to the gland.

Alternative methods of insulation

In each case described above, it will be necessary to change the sealing circuit around the perimeter, which will eliminate drafts and noise. But if you do not want to disassemble the design, but it seems to glue outside the felt, then you can warm up the cheap iron Chinese door from the inside through the drilled holes in the upper end.

There are enough three holes with a diameter of 10-12 mm. Through them, the inner corrugated cardon is crushed with a metallic rod so that it does not create obstacles for subsequent actions. In the resulting loose cavity, the pellets of foams fall asleep. Since the substance is electrified and rushes to the walls will have to be touched by a wooden rail and tapping.

Another alternative is the mounting foam with a low expansion coefficient. To bring it inside on the end around the perimeter, the holes of 4 mm in diameter and poke the sealant. Previously needed krotni rods to minimize corrugated cardboard.

The online store "Base Doors" has a large range of insulated models that do not have to be refined later. If you have difficulties with Chinese doors on their insulation or assembly, then we can easily find them a replacement at an affordable price.

You can choose the insulation for the entrance door yourself, if you study the advice of specialists in advanceIn order to save warmth in an honest house or apartment in winter, it is recommended to warm the dwelling from the inside, for example, to salary paper or construction scotch windows. But the insulation of the whole house will be more effective, in particular, the doors. There are different ways to stop access of cold air from the street or corridor. And the properly selected insulation for the door of the entrance will protect the apartment not only from drafts, but also from extraneous noise penetrating the outside.

The best insulation for doors: species and characteristics

You can warm the entrance door both from the inside and outside. In the first case, the empty cavity inside the frame is filled with insulating material, which is also sometimes sound insulation. And the second option provides for the elimination of gaps and slots between the door and the jam. Also, the doors can be cut from the inner and outdoor side with a dense material, which will help to maintain heat in the room.

Read the various types of insulation for doors and their characteristics in specialized stores

The most popular types of insulation:

Rubber or foam ribbons. One of the sides of the tape is processed by the adhesive substance, so when removing the protective layer, the foam rubber or rubber is firmly glued to the door jam. The door is perfectly sealed, and the wind will no longer be blew through it.
Corrugated cardboard. This is one of the cheapest insulation, but not too effective. In addition, it is easily flammable. Therefore, corrugated cardboard is more used as a noise absorbing material. The use of corrugated cardboard is justified when there is no more suitable insulation or a budget for its purchase.
Mineral wool. Perfectly saves heat, it does not burn and does not miss extraneous sounds. If you correctly fasten your cotton inside the door box, it will last for many years without requiring a replacement. Incorrectly laid wool will see down, and will not protect from the cold.
Construction foam. This material perfectly fills all the cavities, and thanks to its cellular structure it perfectly holds heat. Its applying does not require special construction skills, so it is possible to produce insulating work alone.
Styrofoam. One of the most popular insulation. It is very light, so even the metal door will not take away. Air filled bubbles do not let the cold and sounds from the street. It is a foam is very cheap, so I got such widespread.
Sintepon. It is mainly pasted on the outdoor side of the doors and requires the upholstery of dermal or vinyl crew. With a small mass, the synthet is perfectly stored heat.

All necessary materials can be bought in construction stores.

Easy way to insulate the entrance door with your own hands

Doors from well-known brands are usually warm up with inside and outside. But if you bought an inexpensive Chinese door, you will have to warm it yourself. At best, it can be disassembled to the components using a screwdriver, but it may be possible to cut the inside with a cutter or scissors for metal. Then it will need to be carefully welded back or replace plastic with a beautiful pattern.

In order to insulate the simplest door, it will be necessary to pre-disassemble the design to individual components

Procedure for conducting work:

Remove the door with the loops;
Unscrew the handles and door locks;
We disassemble the door frame;
We put the selected insulation or bleach the mounting foam;
Collect the door frame;
We screw the handles and locks and put the door to the place.

If the inner part did not manage to put in place, it will successfully replace horizontal plastic strips laid in a special corner, screwed around the door perimeter.

How to insulate the door in the apartment quickly and efficiently

The doors are not exposed to atmospheric phenomena and sharp fluctuations in temperatures, so the main problem is a pass-through wind that blows through the slots. One of the methods of eliminating a draft is the installation of the fastened double doors. You can use a more economical way and simply stick a foam silicone or rubber seal around the perimeter. The material is sold in construction and housekeeping stores.

For insulation of the entrance door to the apartment you can use a foam seal

Sequencing:

First you need to measure the gap between the door and the frame to buy the insulation of the necessary thickness;
Then the seal is glued around the perimeter or pressed into a special groove.

If the sealant is incorrect, the door will be closed with great difficulty or will not close in general, and the locks and handles will quickly come into disrepair from elevated loads.

Outside the doors in the apartments are inhabited by vinyl, dermatin or genuine leather, pre-insulated with their foam rubber or Vatin. Returning from the edge of the door leaf of about 5 millimeters, the material is naked. It is necessary to do this with special carnations with a wide hat or construction staple. On the sides can be decorated with a wide strip of leather or dermatin. The inner part of the doors in apartments usually do not insulate.

We produce insulation of the entrance door in a private house

In the private sector, it is necessary to insulate the entrance door, as it is not protected from rain, snow, wind, frost. The wooden door can refuse and crack, and the steel in the cold will be covered from the inside of the people. Therefore, comprehensive insulation is recommended.

If you need to insulate the entrance door in a private house, then special attention needs to be able to warm both the door and the box itself

How to warm the doors in a private house:

The seal is pasted as the door itself and on the door frame.
The inner part of the metal door should be used or filling with mineral wool (foam). The gaps in the material with the correct laying should not be left, otherwise the cold will penetrate them.
Outside, the iron door can not be understood without anything, and the wooden is recommended to protect from moisture with waterproof material. Pre-gap and cracks are embarrassed by special mastic.
From the dwelling side, insulating material is also stuffed. It may be dermatin with a substrate, felt, an old cotton or woolen blanket.

Recommendation: How to insulate the Chinese iron entrance door (video)

In practice, the question is how to insulate the iron Chinese entrance door, "pops up" every winter. Every year, new happy owners of inexpensive inlets of metal products from China are found that they are frozen, covered in the hell, they are "wild" cold and so on.
The best option would be correctly used such iron doors according to their direct purpose, without trying to consider as entrance for a private house in the conditions of our climatic zone. Or buy high-quality entrance doors. If you wish, you can find Chinese metal doors regarding good quality and at a good price (dvor16.ru/catalog/vhodnye-dveri-kitaj). But if the case has already been done, an inexpensive metal Chinese entrance door has already been established, finishing works have finished, I don't want to change anything. And I want to upgrade the "low blood" what we have. The search for masters begin, they are listening and read on the forums on the Internet the most "desperate" tips, how to insulate the iron Chinese entrance door with their own hands. All this does not make any sense.
The first popular advice how to insulate the iron Chinese entrance door with their own hands. Insulation "In the middle".
Heat the iron Chinese entrance door independently, you can not precisely because it is a fairly high-tech metal product. It is impossible to make changes to the factory design. Almost impossible to come up with a way to "disassemble, and then collect" this metal door. Disassembling it is simply not provided by the manufacturer. Being "forcibly" disassembled, thanks to the Russian regiment, the Chinese rail door is actually falling apart, more precisely: irreversibly deform, because it was assembled on a special stand, where individual elements of the design are set and fixed by the assembly snap. Read - pressed clamps. Without factory equipment, stand and special equipment, it cannot "become normal." That is, the most familiar technology for the insulation of metal doors from Russian and Ukrainian manufacturers: disassembly, filling with foam and "reverse" assembly, here in applicable in principle, due to the design features.
Trying to blur inside the door leaf mounting foam through the holes, self-drilled in the metal - the idea is absurd. The product is not only deformed, but also will definitely join all locking thrust, but most likely the castle will fail. In addition, inside the Iron Chinese door is not empty, as many people think, and there is a paper soapy insulation. The garbage is rare, however, a foam blow just nowhere. Plus, the door design provides an internal frame of the door web, resembling thin metal partitions, which will also not give you normal and evenly fill the inner space by mounting foam.
The second popular council how to insulate the iron Chinese entrance door itself. Warming "inside and outside."
Theoretically, as an auxiliary option, if you can not normally fill the door leaf in the middle of the heat insulating material, you can try to sew the inner side of the Iron Chinese door, without missing cold. Developing a "concept", it would be logical to decide or bonding "at the same time" and the outdoor side of the iron entrance door. The method in principle is not good anywhere, because it is inffective. However, the metal door of the local manufacturer can really be seen with thick wooden lining. It will look beautifully and a little will warm the front door. At least it will not be so warmer and "cry" dew. The trouble is that local manufacturers use welded loops and the design of the louting with a very large margin of strength. Chinese iron entrance doors have a completely different design of the magnifier and loops. Even a small additional load quickly and completely spoils such products. Do not deceive the "status" of the metal entrance door. Yes, it is really iron, but not durable.

In order to save warmth in an honest house or apartment in winter, it is recommended to warm the dwelling from the inside, for example, to salary paper or construction scotch windows. But the insulation of the whole house will be more effective, in particular, the doors. There are different ways to stop access of cold air from the street or corridor. And the properly selected insulation for the door of the entrance will protect the apartment not only from drafts, but also from extraneous noise penetrating the outside.

The most popular types of insulation:

Rubber or foam ribbons. One of the sides of the tape is processed by the adhesive substance, so when removing the protective layer, the foam rubber or rubber is firmly glued to the door jam. The door is perfectly sealed, and the wind will no longer be blew through it.
Corrugated cardboard. This is one of the cheapest insulation, but not too effective. In addition, it is easily flammable. Therefore, corrugated cardboard is more used as a noise absorbing material. The use of corrugated cardboard is justified when there is no more suitable insulation or a budget for its purchase.
Mineral wool. Perfectly saves heat, it does not burn and does not miss extraneous sounds. If you correctly fasten your cotton inside the door box, it will last for many years without requiring a replacement. Incorrectly laid wool will see down, and will not protect from the cold.
Construction foam. This material perfectly fills all the cavities, and thanks to its cellular structure it perfectly holds heat. Its applying does not require special construction skills, so it is possible to produce insulating work alone.
Styrofoam. One of the most popular insulation. It is very light, so even the metal door will not take away. Air filled bubbles do not let the cold and sounds from the street. It is a foam is very cheap, so I got such widespread.
Sintepon. It is mainly pasted on the outdoor side of the doors and requires the upholstery of dermal or vinyl crew. With a small mass, the synthet is perfectly stored heat.

All necessary materials can be bought in construction stores.

Easy way to insulate the entrance door with your own hands

Procedure for conducting work:

Remove the door with the loops;
Unscrew the handles and door locks;
We disassemble the door frame;
We put the selected insulation or bleach the mounting foam;
Collect the door frame;
We screw the handles and locks and put the door to the place.

If the inner part did not manage to put in place, it will successfully replace horizontal plastic strips laid in a special corner, screwed around the door perimeter.

How to insulate the door in the apartment quickly and efficiently

Sequencing:

First you need to measure the gap between the door and the frame to buy the insulation of the necessary thickness;
Then the seal is glued around the perimeter or pressed into a special groove.

If the sealant is incorrect, the door will be closed with great difficulty or will not close in general, and the locks and handles will quickly come into disrepair from elevated loads.

We produce insulation of the entrance door in a private house

How to warm the doors in a private house:

The seal is pasted as the door itself and on the door frame.
The inner part of the metal door should be used or filling with mineral wool (foam). The gaps in the material with the correct laying should not be left, otherwise the cold will penetrate them.
Outside, the iron door can not be understood without anything, and the wooden is recommended to protect from moisture with waterproof material. Pre-gap and cracks are embarrassed by special mastic.
From the dwelling side, insulating material is also stuffed. It may be dermatin with a substrate, felt, an old cotton or woolen blanket.

Recommendation: How to insulate the Chinese iron entrance door (video)

Metal entrance doors made by the hands of hardworking Chinese were firmly settled in apartments and houses of domestic citizens. And it is not surprising, because their price, the relatively good quality of performance and the multipleness of the appearance invariably attracts and manits the people. Unfortunately, such structures have one substantial minus - the lack of a strong-quality layer of the insulation, which is unacceptable in our climatic conditions.

As usual, folk craftsmen were rapidly oriented in the situation, and found ways to insulate the Chinese door canvas to preserve the precious warmth in the house. It turns out that in the presence of a minimum set of fixtures and the skills of treatment with them, from the budget door it is quite possible to make a real wall, which will not pass any draft. It sounds tempting, is it not true?

This article proposes options for how to do with your own hands can be insulated with detachable and all-in-mail inlet canvas from China.

Warming of detachable doors

This type of canvases has an inner trim, which is attached to the core through the screws. There are models in which the inner covering is not at all.

At the initial stage, it is important to choose the right insulation. It is completely incorrect to think that the foam or mineral wool is the most optimal option. It is much more faithful and more profitable to take polystyrene, which initially has a more dense structure.

Next, it is necessary to establish the thickness of the insulation and its area, for which it is necessary to measure the thickness of the canvas, without leaving the trim from both sides. The area is installed elementary: the door height is multiplied by its width. If there is a construction insulation, in which there is no internal skin, the leaf is additionally acquired by a leaf of organic or fiberboard, which then covers the insulation itself.

Once all this is available, you can proceed to the process itself:

We remove the inner trim or drink a new one from the organic or other material.
If it is necessary to personally make the inside of the web, you need to carefully check all sizes and prepare holes for the handle, locks, eyes and other items.
Any metal door has inside the ribs of stiffness, the space between which is filled with insulation, and as close as possible.
If you stopped on a polystyrene, but bought a plate of greater thickness than you need to fix the case will help hot wires or a long and thin hacksaw.
The foam or other insulation is not simply cleaned between the ribs, but also additionally fixed with liquid nails.
We screw the removed over the trim or by mounting a new, made of fiberboard. In the latter case, it is better to use a magnetized screwdriver or a screwdriver with a magnetized bat, which screws up several of the screws on each ribbiness and on all sides of the door sash. If, due to the design features, the ribs of stiffness in them cannot be screwed fastened, you need to additionally mount the corners.
By the stage of the warming of the door insulation for the winter will be a comprehensive cutting of the lining of the Fiberboard, which is made by a sandpaper or small file.

What to do with a delicate web?

Of course, it would be good if the iron door of Chinese production was initially insulated. Because it makes the final product more expensive, we can take the economy option, and improve it by virtue of your abilities. In the case when the entrance door design has a permanent panel, you need to get ready to change the inner view of the web and make a new lining. But first things first:

The door completely gets rid of the accessories, located on the inside.
Additional framework is made, as in the photo. For this, wooden planks are recorded on the entire inner contour of the web, the width of which should be a similar width of the insulation. It will be better if the holes under the self-sufficiency will be prepared in advance in the metal base, and their diameter will be slightly less than the circumferential fasteners themselves. At this stage, it is recommended to fix several transverse speakers, and all the wooden elements should be attached as tightly tightly to the metallic base.
Self-tapping screws should be screwed up with a deepening in the wood, the location of the fixation should be embedded with a putty on the tree, after which all wooden parts are definitely stained or vague.
The Chinese door is then filled with the selected insulation, which is desirable not just pressing well and squeeze into a newly created core, but also to fix glue by the type "Dragon".
All this is covered by a sheet of fiberboard of the desired dimensions, which, again, is attached by self-drawing or even nails to wooden planks.
The foam rubber is superimposed on top, which stretches high-quality leathesum. The latter is attached by specific cloves with decorative or hidden hats. In more detail, the whole process can be traced on video.
Since after such insulation of the door canvase, it becomes much wider, it is important to buy appropriate fittings.

At the final stage, it is important to fill the mounting foam all the cavities and gaps found between the box and the wall. After its drying, everything is unnecessary cuts off with an acute stationery knife, and the junction place is closed with a putty or cement.

Alternative methods

If you decide to protect the private house of the Chinese door, try to make sure the tightness of all its seams. Then it will be possible to warm the design by filling the inner cavities with vermiculite or perlit.

And yet: do not rush to get rid of the ancient inlet canvas. Try to live with two doors, between which an airbag is formed. It has excellent sound and heat insulating abilities, and is quite capable of replacing the cell's own insulation and maintain a metal sheet from freezing.