The process of growing currant on its summer cottage is a rather time consuming occupation. It would seem that nothing complicated in each of the stages of care for this plant is not. Nevertheless, if you do not provide everything competently, and some requirements will go through the party, rely on a generous harvest you are unlikely to have. Special attention should be paid to the formation of berry plant bushes. Most domestic farmers at the present stage use special backups for currant. They are of different kinds, so it should be sought in more detail in which one will become the best option for you.

What is the support of the bushes

Currant on a spleker is a shrub, the direction of growth of shoots whose sometimes needs to be corrected. For example, the plant develops quite normally, but during the formation and ripening of berries, the branches begin to be fed up under their severity. In this case, it is necessary to take care of the currant bushes and to build a special support for them. And far from the currant needs a similar "maintenance" of form. This kind of frames are used for other shrubs: raspberries, viburnum, blackberry, gooseberry. Sometimes they are used to create neat shape bushy colors (roses or peonies).

If you can consider the key advantages in more detail, the compactness of plants can be considered.

The presence of the backup will allow you to significantly save space in the garden plot. In addition, a rather important advantage is also the correct formation of the crown of plants. Therefore, a coarse holder for currant is a necessary device that will certainly appreciate each gardener.

Benefits of the backup of currants

Why should it be used in the gardening coasters under the bushes? With their help you will be able to make shrubs right. As a rule, farmers use similar devices, as it gives several advantages at once:

• branches of shrubs grow up and not "fly away" on Earth. In this case, the plant will continue to develop fully, but will not grow randomly. You get a decorative type of shrub, and in the future you will be much easier to collect a harvest from him. In addition, in the autumn period, you cut the soil around the bush without unnecessary problems;
• berries ripening currant on branches will not be lowered down the book. That is, you will eventually collect clean fruits, and it will not be installed, which often happens when taping berries to wet earth;
• the process of harvesting is significantly simplified;
• much less harm to shrubs will cause rain rains or strong winds.

The advantages of currant feeding will certainly affect the solution of an experienced farmer. The main thing is that the efforts you do have not remained in vain, so it is very important to purchase a backup or to build it at home. We are talking about the indicators of the yield and the health of currant shrubs, so you have to worry about what.

5 ways to manufacture with your own hands

Backups for currant make it yourself not too hard. Of course, such devices can be freely purchased in specialized stores. But why spend extrany funds, if no less productive framework you do without any problems at home? The main thing is to understand the main varieties of these items, as well as determine which of the support will become the best option specifically for your currant bushes.

Quite simple in the implementation of the method is considered to manufacture a stand of wooden pegs. If you fulfill all the recommendations of specialists competently, such a device will be your faithful assistant for at least a few years. Pegs need to be driven into the ground around the bush. Use 4-5 pieces. Next to the resulting supports attach a wire or durable twine. Another similar way is the use of Rogatin. They are driven around the shrub, and then on top there are smooth branches. Very often, durable branches cut from fruit tree are also used as Rogatin.

Metal stands are considered in demand among experienced gardeners. To do this, use trimming of metal pipes. They play the role of pegs: they are riding the ground, and then the rails are attached to this design. All this is ultimately fixed by self-drawing. The plastic backup for currant bushes is widely used. It is durable and with decorative appearance.

You can also apply in gardening and seemingly spoiled solar lanterns. The use of this material will allow you to build a completely stable design, but it will not work for too large loads. Nevertheless, if you need to install a backup for young currant shrubs, a plastic design is a good solution.

The most decorative and at the same time the standard is considered sufficiently strong pipe. They are recommended to cut into three identical parts. The rest of the material is converted into two circles. It is best to buy green pipes: Thus, the design you make will merge with green currant foliage. Remember: Currant on a homemade sleeper is an excellent solution for any gardener.

Video "Supports, Supports, Garters for Garden Shrubs"

From this video you will learn about how to independently do high-quality supports, support and garter for garden shrubs.

A currant bush has an empty shape. The lower branches are lowered to the ground. As a result, the berries are on wet soil, which leads to their winding. To get a rich harvest, experienced gardeners use streams for bushes. There are several common ways how to disperse the currants with their own hands.

The use of such specialized backups in the country has several advantages:

• tidy, decorative form of plants;
• increase in yield;
• improving the quality of berries (preservation of dirt and mold);
• simplifying the collection of fruits;
• lightweight shrub care (it is easier to pruning old escapes, a musting and soil looser);
• additional protection against animals (birds and rodents);
• strengthening from rain and strong busting winds.

The backups are sold in garden shops. However, you can freeze the currants with your own hands.

Disgust

Trucks from pegs and twine

The easiest option of the fence for currant bushes is made of pegs and twine. If you fulfill the design in good faith, then it will have a few seasons. For this fence, you will need:

• 5 stakes of such a length so that they rise above the soil of about 0.5 m (for the backup of a powerful, stretched bush use a greater number of stakes);
• twine (instead you can use wire or beep).

Support from peg

Clauses are installed around the currants at such a distance so as not to damage the roots. Then the twine is fixed on one of the pegs. Selecting the branches on the desired height, fasten it on the next support. Thus, enveloped the entire bush, raising shoots and tieting the twine to the stakes. It turns out an improvised fence.

Fence from Rogatin and simple branches

The fencing for currant from Rogatin and simple branches is one of the most budgetary structures. Rhotina can be made from unnecessary branches of the fruit tree in its plot or find in the forest. If there was no suitable material, it can be made independently from the boards.

The reverse end of the horns must be sharpened to be easier to stick it into the ground. If the fence is poorly kept in the ground, it can be fixed with additional pegs. It is desirable that the angle of branching of Horthina was wide enough. Then the branch that will be attached from above will be able to lie tightly in its foundation.

Four horns are installed around the bush at the desired height. Top on the fork are superimposed dry, durable branches. Then they should be tested with rope or wire.

Additional Information. In the fall, such a support is easy to disassemble until the next season. In order for the product to be used for a long time, it must be dried and disinfected. The lack of this fence is the low resistance to the strong gusts of the wind. Requires additional fixation of Rogatin pegs.

Stripper on iron-based

The fencing from the metal is distinguished by strength and has a long service life. It is necessary to create metal pipes, wooden slats or bars.

Pipe supports are installed around the bush. In their holes are fixed small rods of wood. You can use unnecessary sticks. Flat boards, rails are placed on top of them, which are then fixed with self-draws.

Instead of bars, rails and boards, you can steal with a metal wire. For this measure the gap between iron supports. To the wire of such a length, another 20 cm is added. The ends of the resulting segment are raised by 10 cm on each side and insert into the holes of the pipes. Fencing with the use of wire should be wrapped with soft rubber so as not to injure the branches.

Also use iron rings fastened by a bolt. These hoops are fixed on the supports with hooks. Rings wear in spring on the bushes on top before the appearance of leaves.

To give a decorative look, a carp can be painted. It is recommended to use paint to protect the metal from rust.

Plastic pipe rods

Fencing for currant from plastic looks decorative. For strength, they are comparable to metal structures. For their creation, PVC pipes are required 4 meters long and 4 angle for connecting pipes.

The assembly of currant fence begins with cutting pipes to 8 equal parts. If the bush is a sharp, then the pipes are longer, so that the design is higher. You can cut with a metal or pipe cutter. There are 4 plastic supports around the bush. They are connected to each other with the help of other plastic segments and "triangles", fastening with screws or irons for soldering propylene pipes.

Costridge

Gardeners who are interested in how to focus the currant bush can use fiberglass composite reinforcements with a diameter of 4 mm or a multi-proper single-core wire in a single isolation with a length of about 5 m. They are pulled through holes in supports.

A coarse holder of plastic pipes - light design. For the best equilibrium, it should be deeply plugged into the ground.

Metal Pipe Costforce

The backup from the metalplastic is one of the most durable and decorative.

1 way

To make the fence of currant with their own hands, the following materials are needed:

• metalplastic pipe;
• nails or self-tapping screws;
• segment of the rubber hose;
• rusties;
• hand saw;
• a hammer;
• screwdriver.

First, the supports are made from the pipe, cutting off 3 equal parts from it about 80 cm. For greater stability of the fence, you can build a larger number of stakes.

Then, from the remaining pipe make two identical hoops. To connect pipes, the hose segments are used with a length of 10-20 cm. The diameter of the hose must be carefully selected so that the metalplastic does not hang out and lightened tightly.

Metal plastic trumpet

In the openings, supports are scored. With the help of nails or self-tapping screws, the upper hoop is attached to these wooden pegs. The bottom circle is fixed to the supports through the pipes or simply put on the bottom, using the wire for fastening the wire. After installing a coat holder, the lower hoop should be located at an altitude of 20-30 cm from the surface of the soil.

So that the design does not catch up and harmonized with a bush, it is recommended to use green materials.

2 way

Before independently make such a fencing for currant, it is necessary to prepare the following materials:

• metalplastic pipe;
• polypropylene tube;
• "Tees";
• apparatus for welding plastic pipes (soldering iron);
• cut of the hose.

Metal plastic is built hoop. 3-5 supports are manufactured from polypropylene. Then the tees are soldered to the supports. Stands with tees are put on the hoop and are evenly distributed. Ends wrap are fixed by the segment of the hose. Racks can be installed on metal pegs robbed into the ground. Then the design will be most stable.

Fencing from a tree

It is possible to protect the smorodine bush in the country using wooden plates. A coarse holder made of natural materials will serve not only support for currant, but will also be well harmonized with a local landscape.

For the manufacture of this fence will be required:

• 4 Kolybie 70 cm long;
• narrow slats for a garden fence (they can be cut from a bar) 100 cm in length;
• a hammer;
• self-tapping screw;
• sculpture.

Pegs clogged around the bush. They can be treated in advance to the means of moisture and rotting.

Fencing from a tree

Important! Pegs should be hammered perpendicular, otherwise the design will lose stability.

Check that the supports are at one height. Then, using self-tapping screws, fasten the splies of the plank. Wooden fence can be painted in a green or some other bright color. Some daches prefer to cover with a yacht varnish, which not only protects against moisture, but also gives decorative product.

Each dacket chooses what the fence wants to make for currant bushes with their own hands. At the same time takes into account the practicality, durability, the presence of girlfriend and ease of manufacture.

Cheapest options from those considered fences: from pegs and twine, from Rogatin and branches. These carp holders are not so reliable in bad weather conditions, but they will not be afraid to collect them. In addition, they easily disassemble. So they can be used for the next season.

Fencing from wooden plates, using self-tapping screws, is already more solid. The view of him is presentable than the previous options. This indiscriminate structure. The disadvantage is that if it is not removed for the winter, then with a large number of snow, it can break. And if you try to take off in the fall, you can break the grown branches.

The fencing for currant on iron-based is durable and founded. However, it is subject to corrosion. And the wire, if it is not wrapped with soft rubber, can injure shoots.

Cost-containers made of plastic pipes are neat and reliable. It is only possible to build such structures from thick materials, otherwise in winter under the layer of snow, they may break, and under the influence of low temperatures will become fragile.

Hebee from metal-plastic pipes are considered the most durable, decorative and expensive. However, the gardener that allowed such a luxury, such a fence for currant will delight for many years and justify the funds invested in her.

Specialized backups are important not only for currant, but also for growing decorative and fruit-berry shrubs. Such stands are suitable for viburnum, gooseberry, raspberries, blackberries. Ornamental plants need them: roses, hydrangeas, the canbushnik.

Do you have currants, roses, gooseberries, peonies, tall phlox, chrysanthemums? These bushes need support. Consider the variants of self-containers of sprocket materials.

7 reasons for installing stands

Support for bushes is needed. It helps to eliminate several problems:

1. The branches do not fall on the ground. It eliminates the possibility uncontrollably multiply by tanks.
2. Berries and buds do not touch the Earth and remain clean.
3. On raised berries it is more convenient to collect fruits.
4. Busts better tolerate natural adversity (wind, shower).
5. There is an opportunity to give the right crown form.
6. The plot acquires a well-kept view.
7. Plants are not amazed by rot from the land of land.

Stands from girlfriend

In retail sale of garden accessories there is a whole arsenal of carstools. If you wish, you can save and make support yourself. For any owner, this process will not be difficult. They are made quickly. Consider several options.

Pegs and twine

The easiest and most affordable way is the use of wooden pegs. With high-quality installation, the design will last for several years. It will take 4-5 pegs (tree trimming, remnants are not a thick timber). They are driven into the ground around the bush. As a result, about 50 cm should remain above the surface.

A durable twine or wire is fixed to one support, lifting branches, fasteners goes to the next peg and so on. As a result, it turns out complete edging. Wire can be replaced by bars. They are fixed to the support by self-draws.

Stands on iron based

Long will last a support from the metal, besides, is the most stable. If you have pipe trimming, then a time will need to work. Pipes are driven next to the bush. The openings are fixed suitable for the size of the wood (sticks, bars). They are superimposed by rails, thin bars, narrow boards. Must with self-drawing and ready.

You can simplify using metal wire. Measure the distance between the pegs, add 10 cm for each end for bending. Make the wire of the desired length, get the ends and insert into the holes of the pipes.

Plastic pipe stands

The design of plastic always has a presentable view, in durability is comparable to metal supports. For operation, it will take reinforcement fiberglass (4 mm) or a thick single-core wire in isolation, approximately 4-5 m, plastic pipes - 4 m.

The pipes are cut, drive into the ground, with the leaving a sufficiently high aboveground part. At the ends, openings are made for edging.

Stands from lawn lanterns

From the failed solar lanterns there remains perfect material for rudder holders. The design will be stable, but not designed for heavy loads. For young bushes and colors are quite enough.

The lantern is removed the top with a flappon. There is a hollow tube on a faceted peg. We introduce into the ground next to the bush. Next, build up sticks and make edging from wire or electric pipe.

Metal Pipe Stands

Such a support will be the most beautiful and practical. For the stability of enough 3 racks. For this pipe cut into three identical segments of 70-90 cm. From the remaining metal, you need to make two hoops. For bending advised to use a barrel. The pipe wrapped on it is fixed by the segment of the plastic hose (10-15 cm), which is simply put on the ends and does not give the circle to turn around.

In the upper parts of the racks clogged pegs. It records the upper hoop (nails, selflessness). The second round is put on the lower part and the design is installed. The lower hoop is shifted at a distance of 20-30 cm from the ground. If you need to fix the circle, you can use the wire or make through drilling through pipes. Creating such a coarse holder is better to purchase a green metal-plastic tube.

With properly, timely trimming of fruit shrubs, supports may not be required. They are necessary for peonies, hydrangea and other flower bushes. For such species, it is advisable to make collapsible carcasters. Install during the growing season and remove after flowering.

To maintain bushes on the summer site, special fences are used. They are designed for plants such as currant, raspberry, viburnum, blackberry, gooseberry, as well as bushy colors - roses or peonies. Thanks to this fence, the bushes have a more compact neat appearance, and the crown of plants is formed correctly.

Example of a homemade stand Fencing for currant bushes

Positive moments of use of streams for bushes

In addition, the design of fences for bushes is simple and can be done with their own hands.

Ideas for creating rod-containers from girlfriend

Stands for currant bushes are presented on the market in a fairly wide range. In the finished form they appeared relatively recently.

But the amateurs gardeners have long used fencing for bushes from various infringement materials.

Some ways to create rods are very simple and will not require a lot of time and complex inventory.

Fencing of pegs and twine

On the perimeter of the shrub, four kids are clogged so that approximately 50 cm left over the ground (pegs can be installed more). The first support is tied by the twine, twine, wire or any suitable material.

Option device Fencing from pegs and twine

The branches are raised, and the twine is tied to the next peg. The rest of the racks are suspended in the same way.
Tip: Rope can be replaced with latitive bars. In this case, a timber is attached between carriages on the self-tapping screw.

Stand for bushes from Rogatin and simple branches

Four horns with a length of about 70-80 cm are driven around the shrub. Rhobhins can be made of branches of fruit trees. From above on crowning horns, you can put smooth branches.

Fencing with the Iron Base

The most durable and durable will succeed. Make such a carp holder with your own hands will not be difficult. Four steel pipes are driven around the perimeter of the shrub, a suitable bar is clogged on top of the pipe, a piece of wood.

Example of homemade metal fence

Next to the bars with the help of self-samples are attached non-rigid boards or a bar with a small cross section.

Fencing for currant chests from plastic pipes

You can make fencing for shrubs from the following materials:

• fiberglass fittings from 4 mm - about 4 - 5 m;
• plastic pipes - 4 m;
• pipe plugs - 7 pcs.

Stages of work:

The design is sufficiently strong, durable and has a presentable view.

Metal Pipe Costforce

Reliable and simple coach for currant can be made of metal-plastic water pipes:
To work will be required:

• metalplastic pipe;
• self-tapping screw;
• a piece of flexible hose;
• rusties;
• hacksaw;
• screwdriver;
• a hammer.

Assembly steps:

Another version of the tuber holder

Another way to make a stand under the bushes allows you to assemble the design without screws, but you will need a soldering iron for polypropylene pipes.

Fencing for shrubs made of wood

A simple square stand can be made of wood. It is better to use a bar with sections 1x2, 1x3 or 2x2 cm.

1. From a wooden bar need to make a blank of 4 pieces of 60-70 cm. The lower ends of the bars sharpen.
2. Four straps of one length are cut from the bar - 1 m.
3. Pointed racks are installed around the bush, strips screwed up to the upper ends of the bars.

It is necessary to paint or cover lacquer to extend the life.

An example of a device of wooden fences for currant

Buy Stands for Bushes

Stands and fencing under bushes are presented in a large manifold, and these practical products use good demand.

Metal fencing for bushes

Move from steel with powder coating. There may be different colors and configurations. Particular metal fences are particularly beautiful.

Metal holder device diagram for bush

The most durable and have a number of benefits:

• presentable appearance;
• anti-corrosion protection;
• high stability and ability to withstand large loads;
• simple assembly with their own hands;
• metal products can not be removed for winter;
• durability.

The steer holder from steel can be bought from 350 rubles. Forged metal stands will cost much more expensive.

Ivan accents made a wide variety of trellis and pergolas on its site, which perform not only decorative, but also utilitarian functions.

Shalers and pergolas - structures, simple in manufacturing with their own hands, do not require a lot of time and materials for the construction provided, of course, a rational approach to this issue. On my summer cottage, these designs allowed us to ensure order, making care for plants convenient, and most importantly - do not take a lot of time to maintain them in-workers.

TRELLIS - A special lattice on which a plant is watched or to which ties the branches of trees to give them a certain form. Pergola. (ITAL. Pergola from Lat. Perquula - canopy, extension) - in gardening: canopy from climbing plants to protect the passage or terrace from the scorching sun.

• Pergola has a summer kitchen forms a green corridor on the way to the greenhouse.
• Decorative vineyard on the trellis at the entrance to the cottage.
• Wooden lattice attachments on the kitchen veranda.

What makes choplaresses and pergolas in the garden?

Materials for the manufacture of choler and pergol can be the most varied - brick, concrete, metal, plates, wood. If there is a desire to do something like your own hands, first of all it is necessary to determine the appointment of such a structure. For example, on my site (Fig. 1) -no how much such structures. Some of them are purely decorative: from the side of the entrance gates to the country, at the entrance to the house and before the kitchen canopy. Others are designed to grow white sweet grapes or to hide the economic buildings from the eyes (in summer kitchen) and as elements of recreation areas. And there are universal, combining all these functions - in the greenhouse, pool, kitchen.

Different designs pergol and chopler

Depending on the destination, I made different pergolas and trellis, which differ in design. Firstly, these are high, strongly resistant trellis of exterior fencing along the road and in the entrance gate. I made them from metal racks and stretch cables.

At the entrance to the house I built pergola using the used drainage pipes. Near greenhouses and summer cuisine - Trelliers made from thin-walled galvanized profiles, as well as lattice wooden attached. For shrubs, raspberries and blackberries, plants in the greenhouse and plenty roses made combined structures.

Pergola On Hot Summer Days successfully serves as a gazebo or shady canopy over garden tracks, where you can always enjoy cool. If the plot is large, then a few pergola and the choler installed at different parts of the site will create a beautiful landscape. And openwork decorative grids at any time of the year will be able to configure others on a romantic way and provide a good mood.

• Fig. 1. Placement scheme Pergol and trellis on the site: 1 - Trellier exterior fence; 2 - Trelliers for white grapes; 3 - pergola at the entrance to the house; 4 - Wooden lattices; 5 - supports for raspberry bushes; 6 - bastards for blackberry bushes; 7 - temporary support for the Topinambur; 8 - Slearman for plenty roses.
• Fig. 2. Device chopper outdoor fence: 1 - Rack of fence from steel pipes 0 80 mm; 2 - extreme racks of steel steel pipes 0 40 mm; 3 - intermediate racks with steel pipes 0 25 mm; 4 - steel cables in a plastic shell; 5 - Talpard; 6 - decorative cast iron sections of the fence; 7 - Cocole of boob stones; 8 - steel wedge.
• Grapes, rushed over the outdoor fence, practically hides the tag themselves.
• The tension of the cable on the trellis of external fencing with tallpins.

Fencing of the site do it yourself

The trellis installed on the top of the outdoor fence, the design is very simple. Since the racks of the fence are made of metal pipes 0 80 mm, I used them as a base, inserting the supports in them. Steel pipes 0 40 mm. In order to firmly fasten the pipe-support inside the rack of the fence, grated it with a metal wedge (Fig. 2). The length of the supports is approximately 2.5 m. Between the supports pulled the cables whose tension provided by Talrepa. Intermediate metal racks made of pipes 0 25 mm installed in approximately 3 m - this ensures the rigidity and stability of the design and prevents the deflection of the cable.

Pergolas for white grapes

White grapes compared to dark - less curly and less grows, and in yield weaker, therefore, the heat is less than the trellis. This made it possible to apply inexpensive galvanized light steel profiles for the manufacture of a chopper, intended for fastening drywall, and to ensure reliable opposition to a strong wind (we also have hurricanes), applied non-eroded, but reliable technical techniques.

The rigidity and stability of the design provide metal roof runs that redistributing horizontal loads into separate more powerful racks reinforced with steel pipes 0 4 mm (Fig. 3). An important role is also played by choosing a step between racks (approximately 80 cm) and a reliable connection of frame elements with self-draws.

The pergola racks installed in the pre-dug holes with a depth of 0.6 m, but did not concrete, but fell asleep with gravel with stones and rubbed. I needed to install these pergol for several hours.

Fig. 3. Device pergola
from steel galvanized profiles:
1 - racks from the profile; 2 - horizontal riglels; 3 - steel pipes 0 40 mm;
4 - self-tapping screw; 5 - cross beams from a lung profile; 6 - longitudinal runs from pipes and lung profiles; 7 - Stud with nuts.

Top view of lightweight pergolas, located between the greenhouse and need (separates the economic zone from the general).

Pergola at the entrance to the house do it yourself

This support for plants (Fig. 4) I made from water pipes 0 25 and 40 mm, but I use it as a scope, that is, forests for home maintenance (if necessary, wash or replace panels on the facade of the house). The bases of the racks in this design I concrete.

Temporary trellis

I have a temporary set set. I install them as needed and remove the autumn. These are trellis for Topinambur and individual bushes of climbing roses (Fig. 5). Topinambur height of 3 m and more with strong wind loses stability and falls on the lawn. To protect the Topinambur from the season, and the lawn - from fallen plants that are covered with mold over time, I put the support in about the end of July, when the plants rot the height of more than 2 m.

The design is simple and very convenient - this is a cable with hinges at the ends, which I raise the two steel rods (something like scrap is about 3 m. The rods are clogged into the ground at an angle of about 75 degrees, so when the cable is lifted, the required tension is ensured. Disassemble such a sleeper, sufficiently hit by a hammer on loop - and the cable itself falls to the ground.

Raspberry and blackberry

The supports for raspberries and blackberry bushes, I made from metal cables stretched between two horizontal guides (Fig. 6). Cables are stretched along each row of landings. Metal horizontal guides are attached to supporting pipes that perceive all loads. All metal structures from the used water pipes are 0 40 mm. Considering that I have a raspberry and blackberry bushes, I pulled the cables in two vertical tiers for each row: in this case support is provided with trunks and branches of both low-speed and tall bushes. Please note that it is necessary to reliably fix the extreme racks - to the ground to a depth of at least 1.2 m.

Greenhouse

The design of the plants in the greenhouse resembles the design of the supports for raspberry bushes and blackberries - these are the same cables stretched between horizontal crossbones (Fig. 7) in the ends of the greenhouse. For crossbar used steel pipes 0 40 mm. Approximately 2.2 m fixed at a height. At such a height, they do not interfere with the passage and works in the greenhouse. Scrolls are attracted by clamps to powerful greenhouse racks in the corners.

I stretch the cables, twisting the nut on the tensioner bolt. If we smoke the tension of the cable, then the tensioner can be moved along the crossbar. This ensures the exact position of the cables over the rows of tomato bushes or cucumbers. Garters of each bush from a durable thin rope are fixed on cables and serve as plants guide.

Each cable in two-three-places is tied to a metal farm greenhouse with thin knitting wire. This prevents the non-uniform deflection of the cable in the process of ripening fruit, when the consideant is also increased by the weight of the green mass of the bushes. I note that the height of tomato bushes reaches 2.5 m.
Summer cuisine trellis

Wooden mounted lightweight screens (Fig. 8) For a summer kitchen canopy, I made a wooden lining from waste. Screens Here - not only the decorative design element: they serve as a good windproof and support for curly plants.

It took me for several hours to manufacture and install all decorative solutions. The boards of the lining, I saw into two equal strips width 5 cm. Diagonal and framing slats connected nails (screws). To protect against atmospheric precipitation, all wooden elements covered with a protective impregnation on a lamp basis. To the details of the canopy (beams - at the top, the cast-iron fence - downstairs) was dripped with a metal ribbon and hooks from a wire of 6 mm.

Fig. 4. Pergola at the entrance to the house: 1 - the rack of the fence; 2 - pergola rack from pipe 0 80 mm; 3 - longitudinal run; 4 - Pergola beams from pipes 25 mm.

Fig. 5. Collapsible support for Topinambura: 1 - steel reinforcement 30 mm; 2 - cable.

Fig. 6. Scheme of support for raspberries and blackberries: 1 - rack made of steel pipe 0 40 mm; 2 - coarse from steel pipes 40 mm; 3 - cables in a plastic shell; 4 - Taldays.

Fig. 7. The framework of the frame for planting plants in the greenhouse: 1 - crossbar of the steel pipe 0 40 mm; 2 - cables in a plastic shell; 3 - device for tensioning the cable; 4 - Rigel Greenhouse carcass used for suspended structures from cables; 5 - knitting wire suspension.

Fig. 8. Decorative grille device for summer kitchen canopies: 1 - 50 mm wide strip; 2 - Lathe cutting from 50 mm wide planks.

Sleeler for plenty roses.

Flowers

For high vacation roses, we use several types of trellis. The most chassis - the tweer consisting of racing aluminum tubes (waste after the reconstruction of the greenhouse). The plastic grid is attached to them, to which I and I wave a plant.

In conclusion, I will say that all the designs I made, based on purely practical considerations. They do not claim a special design, but nevertheless in the spring and summer the entire area is in greenery, not yielding to the design of estates with expensive brand structures.