Ensuring high-quality sound insulation is an integral stage of repair work. Today, there are many materials designed to reduce the intensity of incoming and outgoing noise, but the overwhelming majority requires subsequent decoration (plasterboard covering, putty, shocking wallpaper, etc.). Sound insulation panels for ISOTEX walls perform not only sound insulation, but also a decorative function.

Properties and characteristics of Isotex

Isotex decorative panels (Isotex) are made based on the heat-sound insulation panel of Isoplaat (Isoplat). The basis of the material is the wood of coniferous trees, chopped into a fibrous mass, subsequently diluted with water. At the final stages of the production of the workpiece are pressed in the panel and pass the stage of drying.

The technological process eliminates the use of adhesives with formaldehydes or other chemical bonding substances. Sitol 5893 is located as a bonding dispersion ingredient and the natural resin highlighted by most representatives of coniferous rocks.

In addition to the wood component and Sitol 5893, isotex contain an aligning paper layer and a decorative coating applied to the front surface.

There are two types that determine the scope of application:

1. Wall panels Isotex., lined with high-quality textiles in four versions or wallpaper blast, most often vinyl, presented in a wider range. Vinyl can imitate venetian plaster, wood, fabric, etc.
2. Ceilingcovered with dense foil paper. The material can be found four types of decor (back surface, imitation of the surface of the tree in two versions, extruded wood texture).

The main difference between the wall samples is a slightly large density of 230 kg / m 3 or more. For comparison, ceiling have a density equal to 220 kg / m 3. Also, the wall panels for the internal finishing of Isotex have a large length and width, which allows one element to overlap a large area.

Decorative sound insulation panels for walls - finishing material of the new generation. They are intended for finishing decoration of residential, office, commercial and industrial premises. Panels cope immediately with several tasks: provide sound and thermal insulation, after their installation of the wall do not need additional finishes.

Sound-absorbing panels - superior to their operational properties an alternative to the usual finishing materials (drywall plates, MDF panels, wallpaper).

The advantages of this finishing material:

• Small thickness. After the walls of the walls, most standard sound-insulated materials, the area of \u200b\u200bthe room changes significantly. Decorative panels solve the problem of appearances in the room of foreign noise, practically without affecting its size.
• Ease. The material has a small weight - the panel covering a section of the wall with an area of \u200b\u200b1.5 m², weighs no more than 4 kg.
• Multifunctionality. One panel is a design consisting of several layers of different materials performing different tasks: sound absorption, heat conservation, finishing.
• Easy installation. After installing panels in the room there will be no large construction trash, dirt, dust. No special tool required. The walls do not need to be preparing: drilling, shtlocking, careful cleaning of the surface from the former coating. Remove the plates if necessary as easy.
• Variety of variants of decorative coating. Panels are produced with an outer layer consisting of: vinyl, paper wallpaper, natural fabric, wood. Among the presented options are easy to choose the desired one.
• Universality. This type is used to finish the walls of apartments, private houses, industrial, commercial and office premises. They are attached to various surfaces: concrete, foam blocks, wood, frame structures and others. At the same time, the presence of traces of the old coating (paint, wallpaper, plaster) does not affect the strength and reliability of the connection.

The wall soundproofing panel can be used to finish the internal surfaces of the balcony or loggia.

disadvantages

Among the disadvantages of the noise absorbing material of this type:

• having to sow all the walls of the room to achieve the result - finishing one surface will not improve sound insulation;
• horification - Modern multilayer panels will cost more than traditional materials.

However, the second item can be called controversial: when using a sound-absorbing panel with a decorative layer, it is not necessary to spend money on materials for alignment of walls, thermal insulation and finishing coating. The ease of installation allows you to do with the repair on your own, so the costs of attracting skilled workers are also reduced.

Construction and features of installation

The product has an end connection of the "groove-spike" type, facilitating the installation process. Even a person who does not possess special construction skills is capable of collecting design. The result is a solid monolithic surface, reliably absorbing all sounds. The joints of the joints of individual elements are not noticeable.

Method of installation of decorative noise absorbing panels depends on the state of the surface. The prepared smooth material is fixed with the help of "liquid nails", for having tangible irregularities, the installation of the crate to which the material is attached using the stapler is required.

Overview of wall soundproofing panels

The most popular decorative panels for the walls presented in the Russian market: Isotex and Haltex.

Isotex.

Noise-absorbing multilayer plates with decorative external coating for interior decorations produced Finnish company.

The basis of the product is noise and thermally insulating material of isoplate with a thickness of 1.2 cm, the outer surface can be finished with linen fabric, paper or vinyl wallpaper. Panels whose coverage is made of wallpaper, you can wash and repain.

Features

Different safety and environmental friendliness. Made of natural wood without using chemical components of the panel are suitable for decoration of walls in residential premises: children's, bedrooms, living rooms.

The coating has a porous structure, transfers sharp differences of temperatures, changes in the level of humidity. Does not relate to combustible or flammable materials.

The walls of the walls with decorative panels of this type makes it possible to improve the acoustics of the room - reduces the humidity of the room.

Exterior design design

The Finnish manufacturer releases a textile coating panel in 4 colors. You can care for such panels only by dry cleaning.

Durable and resistant stove contamination from the decor line, having a vinyl surface with the simulation of plaster, are represented in 6 color solutions. It is permissible to wash using ordinary means.

Panels from the "Interior" series have a coating of wallpaper imitating textiles, presented in 4 versions. Timber series: 4 colors, wooden texture.

Production and composition

The basis of sound insulation panels with a decorative coating is chips of coniferous trees. The crushed mass softens with water, after which the press is squeezed into thin layers. The grip of the particles occurs without the use of chemical additives - resins that are part of the wood are performed as a gluing component.

As a result, after drying, a product is obtained with heat-saving properties, elastic and durable.

Benefits

One finishing material replaces several minutes: thermal insulation substrate, sound insulation and finishing coating.

Besides:

• It is not required to clean the surface from the previous finish.
• The coating is not so solid as concrete and wooden walls, therefore the risk of injury is reduced at a random strike on the walls of the wall. It is especially important for the children's room.
• The installed panels are allowed to repaint, for this it is recommended to use latex paint - it does not have a sharp smell, suitable for residential premises. You can also be covered with water based lacquer - it will simplify the coating care, will save from random damage, will extend the service life of the material.
• Plates are low, thanks to which their installation can be carried out independently, without attracting assistants or hired workers.
• If necessary, the place of the joints can be covered.

FEATURES OF MONTAGE

Since the material is made of wood, before starting work, you should free the panels from the factory packaging and leave for a day in the room, the walls of which are planned to be sewn. This is required in order for the finishing material to take the level of humidity that has air indoors.

Installing panels

Soundproofing panels for walls with decorative coating are mounted in two ways, the choice depends on the state of the surface: with significant deviations you need to install the framework, for even use glue.

Nuances:

• Obsek. The panels are installed on a frame made using wooden rails 19 * 44 cm. The distance between the rails should be 29 cm if they work with a papers with a paper surface, and 30 cm, if with textiles. Fixed panels to the finished design with a stapler using 10 mm brackets. The gap between the fastener is from 10 cm.
• Glue. To work, use water-based glue. It is applied on the back side of the product with a thin strip, walking around the perimeter of the plate at a distance of 2 cm from the edge. In the center of the panel, the glue is applied point, making the distance between the drops, equal to 20 cm.

When the glue is applied, the panel is neatly pressed to the surface, at a short distance from the already installed, then shifted to the next stove so that the panel gets into the groove, and the glue distributed throughout its inner surface.

Halltex.

Another Finnish manufacturer, a relatively new building materials on the Russian market, the products of which are already in demand.

The base is made up of crushed and subsequently compressed wood sawdust, for the connection of which chemical components are not used in a single slab. To fix the upper decorative layer, glue compositions are used, which are used in the food industry, and therefore do not represent a threat to health.

Scope of application

Made of environmentally friendly material - wood - products do not contain harmful impurities, it is possible to use such panels to cover the walls in residential areas: bedroom, living room, baby room; as well as a corridor, kitchen and balcony.

They can be used to finish the walls in seasonal living houses, as they are well tolerated the temperature differences.

Decorative plates are suitable for home theater arrangement, as it improve the room acoustics.

Note! Noise insulating material is not suitable for decoration of walls in rooms with high humidity - saunas, baths, bathrooms, since it is the basis of wood.

Features

Haltex panels have thermal insulation properties. Plates of a thickness of just over 1 cm by efficiency are not inferior to 20 cm concrete, 5 cm gypsum, 3 cm wooden wall or 3 cm layer of mineral wool.

After the walls of the walls, these finishing materials in the room do not occur in the room, the heat inside the room is preserved longer and better, which saves on the heating costs. Haltex walls covered with plates are reliably protected from mold formation - a porous structure provides ventilation and removes from excessive dampness.

You can not wash them all the walls, but only one; It is also possible to use panels as a decorative insert.

The width of the plate is 58 cm, so the work on the walls of the walls are faster than when using wallpaper or MDF plates. Haltex panel noise insulation is 18.2 dB.

Options of the outer layer

The material for the outer decorative panel coating can have different textures and is made of:

• natural textile;
• vinyl layer;
• paper.

FEATURES OF MONTAGE

The process of the skin is simple and does not require special qualifications, the installation of decorative plates of Haltex is under power to everyone. Panels are fixed on the surface with liquid nails or brackets on the crate if it is required.

After the end of the work, the surface can be repainted if desired, paste on them new wallpaper, film or appliqués. At the same time, they will retain their noise absorbing properties.

The finishing material is firmly fixed on the wall, does not fall behind over time or change conditions (increasing humidity) in the room, serves a long time. In case of damage to individual elements, they can be replaced, leaving the main web neglected.

Noise absorbing wall panels with a decorative surface - a finishing material of a new generation. Successfully solving several tasks at once, it creates optimal conditions in the room without affecting the size of the room.

Soundproofing panels are a modern and environmentally friendly material that has high efficiency to combat outsiders. With such a small thickness, there are options for panels from 8 to 22 mm, the panels allow you to create a reliable design to protect against noise on all surfaces indoors. Due to the massiveness, multi-layered and elasticly viscous state of unrelated particles of the filler (small quartz sand), the panels provide a multiple decrease in permeability of shock and air noise. For each specific case, you need to choose the appropriate panels. Start need from determining the type of noise that bothers you? Noise is shock or air. After determining the type of noise, you need to understand how much loudly heard it? Thin panels will cope with weak noise, for strong noise it is necessary to pick up thicker panels.

What is the difference?

In addition to the thickness of the panel of different manufacturers, differ in filler and the quality of multilayer cardboard. In some manufacturers of the panel are made of 10-12 layers of cardboard, between which the small quartz sand is covered, other panel can have only 2 or 4 layers of cardboard and the filler is the usual building sand. Pick up the optimal sound insulation panels task of our manager, as it will be responsible for the final result.

Residents of multi-storey houses envy the owners of private fares for one reason - they have no neighbors. Due to the walls, the crying and shouts of children, sounds from a working TV or vacuum cleaner. Repairs in the same apartment does not turn into torture for the entire entrance. And the random drop of chair or a cup of late in the evening does not respond echo on the floor. If your own house remains only a dream, make life more comfortable in the apartment will help sound insulation panels for walls. How to choose an optimal option, what to pay attention to when buying? All information in this article.

How to choose sound insulation for an apartment

It is important to understand that no material will be able to eliminate 100% of extraneous sounds. But you can reduce the level of noise to an acceptable, not annoying and not annoying every minute.

Before choosing the plates, you need to disassemble what types of sound are that it becomes the source of its appearance. Experts allocate the following types of noise:

• air. In this group include both bark dogs, and noise from the TV, and crying children, and music, and screams. In any of the cases of the sound wave transmission medium, an air environment is used;
• shock. It occurs when the stool is dropped, moving cabinets or piano, demolition of intra-quarterly partitions. The sound is transmitted not by the air medium, but structural elements of the building;
• structural. It is characteristic of buildings with a large amount of engineering networks: ventilation, sewer, etc. When transporting liquids on systems, vibration arises transmitted by partitions and houses at home;
• acoustic. Characterized for new, uncomplicated houses and apartments. In most cases, disappears as soon as the furniture and interior items appear in the room.

All soundproofing or sound-absorbing plates offered to the consumer are more expensive for any kind of acoustic pollution. At the same time, it will not be able to secure 100% silence. Only a decrease in a certain amount is possible.

What is important to know about the sound insulation of the premises?

Plates for walls, ceiling, floor belong to one of the two main types:

• sound-insulating. Special panels of solid fibers "reflect" if not all, then most of the sounds entering the room;
• sound absorbing. Porous, the grainy structure "absorbs" most of the acoustic waves coming from the outside.

Which option to prefer to decide the owner of the apartment, but after consulting with a specialist. Optimally, it is worth choosing a material that combines the absorption and reflection of noise.

Actual solutions to the issue of sound insulation of premises

Modern sound insulation systems are based on sharing a plurality of materials with a dense and porous structure. Getting rid of the elderly from difficult and hard work on layer-by-layer arrangement of noise insulation will help the prepared solutions offered by manufacturers of building materials.

Among the most popular, lay out:

Zipse

Based on the panel consisting of layers of gypsum fiber, mineral or glass wool. Positive traits:

• RW is 10 dB;
• lack of metal elements, and accordingly corrosion, magnetic field, static electricity;
• rock panels on the wall can be in any convenient way: glue, dowels;
• resistance to high temperatures open fire;
• the panels also provide grooves and ridges that facilitate the process of dusting;
• the thickness is selected taking into account the type of partitions (40, 70, 120 mm). It is possible to glue on the capital walls of the brick, and on the interior of drywall.

Installation technology provides the following steps:

• careful cleaning and leveling of surfaces;
• fastening panels dowels through special vibrations. In places of adjoining to the ceiling, the floor, uninsulated seam walls, are sangs with a ribbon, quenching vibration, for example, "Vibrastek-M";
• seams are closed with silicone sealant;
• the SIPS surface is facing with special acoustic drywall using 3.9x41 mm screws.

Mineral Wool Plates

Based on - compressed Minvat. In addition to good sound insulation, the consumer receives and high-quality insulation of the room.

The main advantage is the lack of requirements for the quality of the surface. It does not have to spend time cleaning, elimination of oily spots, irregularities. In the process of mounting on the wall, an aluminum frame is mounted. In prepared cells and stoves are inserted. If the room is too noisy, the number of panels can be doubled. Over the entire design is trimmed with plasterboard.

Acoustic panels

Isotex offers apartment owners its solution to the soundproofing problem - acoustic panels. Obvious advantages of solutions:

• RW is 23 dB;
• ecology. For manufacture, only natural wood (pine, spruce) is used;
• good sound insulation with a minimum of work. Plates can be pasted on pre-purified and aligned walls. The presence of grooves and ridges facilitates the assembly process;
• if you wish, you can not spend money on the subsequent cladding. There are plates with applied decorative coating: vinyl wallpaper or linen fabric in an extensive color scheme.

Plates Isoplaat.

Concern Skano Group AS offered its solution to the market - IsoPlaat plates. The following qualities are interesting for the consumer:

• good noise insulating qualities at the minimum price (RW is 23 dB);
• for the manufacture uses wood fiber compressable under the influence of steam. Chemical ingredients that can cause allergies and skin irritations are not added;
• the surface is enough to clean and align. For installation, special glue is used;
• the thickness is less than that of the analogs, in particular the ISOTEX plates.

Panel Economicalizol

Builders are saved on the quality of finishing and sound insulation. But the Russian company Soundgard came to the rescue of the owners of square meters. Consumers are offered an eco-audible meter consisting of seven layers of cardboard: flat and corrugated. Quartz sand is used to fill emptiness.

Advantage - good absorption of noise. Disadvantage - high price. In addition, each single slab weighs at least 10 kg, which significantly takes the design. You can find the plates of various thicknesses on sale: from 11 mm (SLIM) to 18 mm (Premium).

Installation can be performed in different ways:

• with the use of mounting glue intended for GKC;
• using dowels and dowel-nails;
• with the help of metal guides.

Prior to the start of work, the walls are cleaned from the construction trash, the influx of cement and the construction glue. There should be no irregularities, depression and "hills". Over the eneosvoism is traditionally attached plasterboard, including moisture resistant. If the paper uses self-tapping screws, they should not reach the main wall.

The area of \u200b\u200bthe room as a result can be cut half meter and more. Sound insulation of foam or special wallpapers will solve this problem. Consider in more detail the most popular options.

Soundproofing from polyethylene under wallpaper

Polyethylene plates with a thickness of no more than 5 mm are attached to the wall. This option is preferable for small rooms, where every centimeter on the account. It does not require complex preliminary preparation of walls, the installation of anti-vibration suspensions.

Corkscrews

The option is intended for those who want to simultaneously solve two problems:

• reduce the noise level in the apartment by 70% or more;
• original place the walls.

Vellar wallpaper

Wallpaper from Velor is a good competitor cork. Possess not only excellent noise absorption, but also good decorative qualities. Quality wallpaper multi-layered: a decorative and sound-absorbing layer with a pile on the paper base is glued.

Other sound insulation options

If none of the previously proposed materials and methods are not satisfied, pay attention to the following:

• acoustic porolon. Originated in large rooms, cinema halls, theaters, restaurants. Effectively quenching sound waves and vibrations from carrier structures;
• rolled noise insulation. It is enough to stick onto the wall using the wallpaper glue and you can forget about the noisy newlyweds behind the wall.

Do not tolerate noise in the afternoon nor at night. Do not try to exhort the neighbors, ask them to behave quieter. Choose the optimal sound insulation and live in harmony with you and others.

Noise insulation of walls (video)

Sound insulation panels for walls and ceilings - This is an excellent solution to protect yourself from unwanted noise from the outside. Considering that in most apartments, noise insulation wishes to leave the best, and the neighbors do repairs, as it seems to us all your life, there will always be always, the use of additional noise protection is simply necessary. We will try to figure out in detail what materials will help to cope with this task. We will also consider the original solutions that can, in addition to protection, additionally decorate the design of your interior.

Standard set of protective panels for walls

Sonoplate (Sonoplat) is thin panels consisting of a fibrous extruded sheet forming a dense frame. The internal structure of the panels is filled with fine-dimensional mineral filler of the highest quality or finely dispersed quartz sand (depends on the model). Sonoplat products are the most popular and efficient in sound insulation. With a large mass and relatively low thickness (12mm), the slabs of sonoplat have a record high sound insulation index (RW \u003d 38-42DB). The properties and structure of the panels make them multifunctional: they absorb and insulate the noise on all frequency ranges, reduce the transmission of vibrations and eliminate sound "bridges". Such multifunctionality makes Sonoplat products effective in the struggle both with air and with structural (shock) noise. Sonoplat is an environmentally friendly material consisting of natural components, which is universal in installation and is used in frame and frameless systems of sound insulation of the premises of all types and destination.

Sonoplat can be mounted both on frame systems, and directly prepared (aligned and engineered) isolate surfaces. Sonoplate is used as a layer in the structures of thin sound-insulating systems of walls, floors, ceilings to increase their efficiency in the premises of all types, including children's.

• Fast, clean and simple installation.
• The material is able to break the sound waves and absorb residual sound energy.
• The size corresponds to the standard step of the installed profiles or rails.
• Universal solution of sound insulation of floor, walls and ceiling.
• Perfect floating gender replacement.
• Sonoplate is an environmentally friendly material.
• The best acoustic indicators compared to similar materials.
• Economic benefit relative to other analogues.

The PhoneStar soundproofing panel (Filour) is a subtle multi-layer carcass made of thick cardboard filled with small quartz sand. It is used for soundproofing walls, partitions, floors and ceilings in various multilayer systems. As with other panel materials, the installation of the Filour is logical and simple, and also does not require special construction skills. The panels are installed under the layer of finishing sheets of GKL, GVL and other materials. Filter combines all the necessary characteristics peculiar to sound insulation materials, such as: multi-layered, high surface density and a large mass. Due to this, the panel is as efficient as possible when insulated all types of noise: shock, air and even structural. The composition of the Filter material includes only environmentally friendly natural components: cellulose (paper and cardboard) and mineral filler (quartz sand).

The noise insulating material of Forstar is used in the circular sound insulation of residential and public buildings and structures to give them high soundproofing characteristics with a slight increase in thickness.

Features and advantages of material:

• The material is easy to install.
• Suitable for all types of sound insulation (floor, walls, partitions, ceiling).
• The ideal replacement of the "floating floor".
• Environmentally friendly material.
• Keeps a healthy microclimate in rooms.
• Saving the useful area of \u200b\u200bthe room.
• Allows you to install directly on the building structure without creating sound bridges at the expense of its multi-layered.
• Good fixation of self-tapping screws.

Soundproofing panel system (SIPS) is an effective solution to the problem of additional sound insulation of existing walls and floors. With its help, the majority of tasks to ensure regulatory sound insulation in public areas with high-intensity noise levels are solved.

Soundproofing panel system

The SIPS system is used in the construction and reconstruction of buildings to increase the sound insulation of single-layer building structures: gypsum, brick and concrete walls and partitions, as well as overlaps. It is used in the premises of any type and destination (for additional sound insulation in public spaces, apartments, cottages, offices).

The panel soundproofing system of the SIPS consists of two-layer sandwich panels with a thickness of 120 mm and the finish facing sheets of GKL thickness of 12.5 mm. The sandwich panel consists of a combination of the "hard" layer of GVL and a "soft" layer of mineral fiber on basalt basis.

Features and advantages of material:

• High features of additional sound insulation.
• Frameless fastening method.
• Special vibration-insulating attachment nodes and a puzzle joint in the design of the sandwich panels.

Non-standard solutions for original interiors

Above, we considered standard sound insulation panels for walls. As we see, they all suggest an additional design of the pure surface. However, there are a different solution. In particular, decorative acoustic panels. The wide variety of their diversity allows the premises of the desired notes comfort and emphasize the individuality of the style. Consider some options for beautiful noise protection.

Swedish designer Johan Lindsten in search of inspiration considered the beauty that nature gives us every spring - blooming leaves that fill lives and freshness all around, completely changing the landscape surrounding us. The idea of \u200b\u200bthe designer was to literally transfer these sensations to internal spaces and interiors, while retaining them regardless of the year.

Wall panels with surrounding leaves

This appeared a collection of Leaves - wall panels with a volume outline of the leaves. Similarly, the previous collection of the panel is made from the compressed felt and have an excellent sound-absorbing effect. LEAVES wall panels can be executed in four standard colors or are additionally covered with a cloth of various shades. Thanks to a well-thought-out fastening system on magnets, the installation of wall panels Leaves is as very simple.

Another original example is the heroadesign acoustic panels made of high-quality decorative material for finishing the premises of various purposes with high sound-absorbing properties.

Acoustic panels Heradesign

No wonder this product was interested in designers, architects and builders all over the world. If earlier the products of the brand HERADESIGN were a "legislator" of a new fashion, now this is the leader of innovation in the production of sound-absorbing fiber panels. This is especially visible in new developments, for example, non-combustible wood-fiber panels or a first-class advanced ceiling surface. Undoubtedly, in this case we are talking about compliance with the highest quality standards.

We will also consider decorative acoustic panels manufactured by Ares Line.

Decorative Acoustic Panel Decorvox

The Decorvox series from Ares Line uses the simplicity and efficiency of the material widely used by modern designers. Using natural wool as the base, with mechanical compression, steam and heat, a magnificent porous material is created. Decorvox is made of 80% of natural wool and is ideal for the most exquisite and classic interiors. Ease of installation and protective properties also emphasize its advantages.