Why many of us attract the opportunity to make repairs, or at least part of it, independently? Probably a few reasons. It is a pleasant satisfaction from the quality done by their own hands, which can be shown to guests with special pride, and the ability to get exactly the design of the interior and the quality of finishing, which invited specialists cannot do for some reasons.

And most often - this desire to achieve the desired result with the least financial costs. Look at the ceiling - is it not time to bring it in order?

If such a job seems to you with difficulty due to large levels of level, the need for dirty washing and putty processes, do not despair: there is a much simpler, fast and cheap way to make the ceiling absolutely even and clean with your own hands.

The idea is to make high-quality repairs available to all materials using them with a non-trivial way.

Necessary materials and tools

No, while we do not need a building supermarket - we go to the store of fabrics. That's the way, because we will make the ceiling from the material for curtains. There are several important points here:

1. Curtain fabrics have a standard height of 2.8 or 3 m. Most rooms have several large sizes. Hence the conclusion - the panels will have to be sewed. If you have a sewing machine - this is a case of a couple of minutes, if not - in any atelier you will probably help you. It is better to add two narrow bands around the edges to be symmetrically, but in general, the seams are almost visible on the finished ceiling.
2. The fabric can be any - matte or with a small sampling, color, with drawings. Especially important is for the nursery. But if you have to make seams, choose one-window material.
3. If you want to avoid seams - along the perimeter of the room you will have to build a design of plasterboard that the widths of the material are enough to cover the remaining area. If you dreamed of a two-level ceiling - this is an excellent chance to embody your dream.
4. The length and width of the panels in the finished form should be about 20 cm more corresponding to the size of the room.

Material for the stretch is purchased - it's time to take care of the fastener. We will need quite a bit:

1. Plastic cable channels with a single lock that are sold at any electrical store. There are also plastic tubes to protect cables. Select cable channels and tubes of one caliber, for example, 16 mm. The total length of each material is equal to the perimeter of the room.
2. Bar with a cross section of 25x30 or 25x40 mm. They can be different in size that depends on how much centimeters it is required to lower the ceiling plane. The metra is also equal to the perimeter of the room.
3. Self-tapping screws, small, for example, 16 or 19 mm, at the rate of 1 pc. for every 0.5 m perimeter.
4. The dowels are plastic and self-tapping screws to them, the length of which depends on the cross section of the bar. Quantity - 1 pc. on the temporon meter of timber.
5. To give the ready-made ceiling of the completed species, conventional polyurethane foam baguettes are used. Their quantity is easy to calculate, based on the pattern of the remaining robes.
6. Malyary Scotch (Paper).
7. Threaded hook for hanging lamp.

From the tools you will need: drill, screwdriver, or screwdriver, tree handwheel, construction level, roulette and cord for beat.

Installation of the fastening system

First you need to determine the location of the future ceiling. To do this, use the construction level and the coloring cord to beat the straight lines.

To understand what the ceiling level will be reduced, it is necessary to make simple calculations: a + b \u003d withwhere but - section of the bar, b. - Caliber Cable Channels and Tubes, from - Height of the whole design. For example, if we took the 25x30 bar and the cable channels 16 mm, the ceiling level will decrease by 46 mm.

Almost always the geometry of our premises is far from perfect, and the walls may differ from each other in height. In order for our ceiling to be horizontally, it is necessary to carry out the wall heights for this, for this measure each place in several places. We find a point where the wall is the lowest - in this place, we retreat from the ceiling of 30 mm and beat off the horizontal line through this point using the coloring cord. Check the horizon with a building level.

To be confident in the correctness of the markup, we make a check: the cross will connect the corners of the room with cords attached to the line. If the cords in the center come into contact - everything is in order. If they are at a distance or bend over each other - errors are made in the markup.

We prepare the timber: it is necessary to attach it on a fixed line to the walls. We drill hole holes with a pitch of about 1 m, placing points for drilling holes under the dowels on the walls.

With cable channels, we remove the covers - we do not need them. Brokes Barpp to Brusa from below in the longitudinal direction, retreating from the edge of 0.5-1 cm. In the corners we connect them T-figuratively, with a 03 mm clearance. Fasteners are made by small self-drawing in increments of about 50 cm. Self-tapping screws are screwed into the "crossbar" of the P-shaped box.

Do not forget about the lamp. Near the electric cable's outlet on the ceiling is secured by a segment of a bar in which we screw the hook. Its bend must be about 2 cm below the level of the future ceiling. We stretch two cords diagonally through the center of the room - we find the desired level.

Plottle tank

So that fasteners were more reliable, it is worth spending another preparatory event. Plastic tubes are covered with paper scotch. You do not need to try to do it very carefully - the more folds and races will be - the better.

At the moment we can say that the bulk of the work has been completed - the simplest and pleasant remaining. Before stretching, it is recommended to remove the dust from the floor, the walls and the ceiling of the room, so as not to blur the cloth. It is necessary to try the iron to remove the folds. Also it will be worthless sprinkling the fabric with antistatic to the dust, which appears in each room, did not settle on the ceiling.

The stretch is easier to produce all together or threesomes, although one person is fully coping with this work. The edge of the panel is attached to the plastic tube, which, together with a light pressure, is inserted into the slot of the cable and pinch in it. Thus, all edges of the material of the ceiling are rising and fixed.

Now the fabric needs to pull - starting it is necessary from the middle of the wall and move gradually to the corners. One hand tube sticks to the groove, the other hand pulls the edge of the panels down and towards the angle to gradually drive all the folds there. Faster it will go if stretching the two opposite sides of the perimeter at the same time. It is necessary to pull hard, but that the tubes do not pop out from the grooves.

Before finally fasten the fabric, you need to do a hole for an electrical cable and hook. It is clearly visible from the bottom, as it stands out on the plane of the tight fabric. The hole is made using any accessible device, such as lighters. So we "kill" two hares at once - we do a hole and fix its edges, so as not to run the "arrow" on the fabric.

When the hole is ready, remove the fabric from the fastener on one side of the room to the hook, carefully skip through the hole cable and hook, then fasten the fabric back. Later, the hole will be closed by a decorative cap of the lamp. If the hole is made in advance, up to the stretch, there is a danger of "mischievous", and fit the hole to the hook will be more difficult. In addition, if you fall the edges of the hole in an unstretched state, when stretching, there is a possibility that the "arrow" on the fabric will still appear.

There were only details. Once again thoroughly pull the cloth to remove all the folds. It would be nice to moisten the fabric from the pulverizer so that when drying it stretched even more. To be confident in the reliability of fastening, you can screw the screws directly through the tube, so as not to give it to rotate under the tension of the fabric. The pitch of the screws is about 0.5 m.

Masking fasteners

It remains to hide fasteners with polyurethane baguettes. They are cut and glued on the wall just as it is done in conventional repair, with the difference that they are not fixed to the ceiling.

Before sticking, the hanging edge of the fabric needs to be collapsed with a roller and fasten to the bruus, for example, a scotch tape or a stapler. It is better to use baguettes with symmetric shoulders, i.e. having an angle with equal parties in cross section.

Baguette color can be made in advance, and you can after installation. Then the ceiling cloth must be protected with a long spatula.

Why do we all need it

The ceiling is ready! Perfectly smooth, beautiful and ... very inexpensive. The lion's share of its cost is fabric. If you have been repaired before you have been repaired, it is possible that you have too much circumstances of building materials - you can use them and not spend money on buying a bar. Self-tapping screws and dowels, too, for sure every owner will have.

1. The most inexpensive cloth for curtains costs about 200-300 rubles. We take 3.2 m, we spend 960 rubles.
2. Channel cable and tubes cost about 10-12 rubles / mongon meter. 11 meters will cost 132 rubles.
3. The 25x30 bar is priced about 20 rubles. For a three-meter segment. Thus, sawn timber will cost us at 80 rubles.
4. Self-tapping screws can be bought by weight, the handful of these fasteners will not pull more than 100 rubles. The same applies to dowels.
5. Normal baguette for ceilings costs about 100 rubles. For a segment 2 m. Accordingly, 6 shoulders - 600 rubles.

Count? We spent several hours and 1972 rubles to bring the ceiling in perfect condition. As they say, comments are superfluous ...

Of course, like most other ways to repair the ceiling, this method also has its weaknesses. The main one is the inability to wash the cloth without removing it. However, as you have already seen, this process is not of great difficulty. If neighbors from above will behave peacefully, your ceiling does not threaten anything!

The ceilings decorated with cloth look stylish and rich. The choice of textures and coloring of the canvas suitable for the ceiling decor is huge, so the tissue finish is increasingly used in modern repairs. The methods of finishing the ceiling with a cloth several, we will tell about them in this article.

Fabric ceilings - what are they?

Among them are most popular:

• stretch ceilings of fabric;
• draped fabric canvas;
• ceiling pastry silk.

Tension ceilings from fabric

They are performed from a special canvase based on synthetic tissue with polyurethane impregnation. Fasten on special baguettes with clip mounted on the walls around the perimeter of the room.

The advantages of stretch fabric ceilings:

• do not require the preparation of the draft ceiling;
• have a smooth surface;
• durable and durable;
• fireproof;
• allow to create a smooth and smooth ceiling.

Disadvantages:

• the color palette of the canvas is not too large and includes only basic colors and shades;
• drawing pattern on the stretch ceiling is possible only after its attachment;
• the work requires the skill of the installation of tension systems;
• after dismantling, the web can be replaced, the re-installation is not possible.

Stretch fabric ceilings are an excellent choice for finishing the premises in the classic style. They gently and unobtrusively emphasize the decor of walls and interior items, without distracting attention. They are used in the living room, office, as well as in other rooms, where strict lines and muffled colors are appropriate.

It is not recommended to use stretch ceilings from fabric in rooms with high humidity: the material will collect condensate and dust, quickly contaminated. Also undesirable to install them in the kitchen - the porous structure of the canvas absorbs odors, soot and fat, so the ceiling will quickly lose freshness.

Prices for fabric stretch ceiling

fabric stretch ceiling

Note! Stretch ceilings can be made of natural fabrics. At the same time, it is important to choose a web such a width to avoid unnecessary seams. As a rule, curtain fabrics use for this purpose.

Draped fabric ceilings

This type of finish allows us to use any tissues, from smooth silk to a translucent chiffon and organza. Due to the use of different textures, you can create various effects, give the ceiling any forms and bends.

Two-layer structures are also popular when over the smooth stretched canvas from dense tissue laid skillful drapery from a translucent flickering material. Drapery can be decorate the entire surface of the ceiling or individual fragments.

Fastening the draped ceilings can be performed:

• brackets or small carnations to wooden guides;
• on sticky tape;
• on a wooden frame, which is later attached to the ceiling.

Advantages of draped ceilings from the fabric:

• they do not require expensive preparation of the draft ceiling;
• easy mounted with their own hands;
• the canvas can be easily removed for cleaning or replacement;
• drapery is resistant to mechanical damage;
• a huge selection of colors, including the pattern, and the texture allows you to create a unique finish;
• finally, it is an inexpensive, but very spectacular way of finishing.

Disadvantages:

• drapets strongly lower the ceiling level, they should not be used in apartments with its base height of less than 2.7 meters;
• fabric is a fire-hazardous material, so special attention should be paid to the choice of lamps and electrical wiring device;
• the material absorbs odors, it is not recommended to mount it in the kitchen or indoors with sharp odors.

The draper can be pulled in the rooms where the comfort and homely atmosphere is appropriate: in the bedroom or children's, living room or dining room, as well as on an open veranda or terrace - there can be mounted on the summer period, and to remove it.

Draped ceilings fit perfectly into the oriental style of design or "ampir", and a smooth stretched fabric will decorate the room in the style of "Country" or "Provence". In the nursery using fabric you can create a fabulous atmosphere, pick up textiles with magic motifs.

Prices for satin stretch ceiling

satine stretch ceiling

Note! For drapets, almost any fabrics are suitable, the main requirement is the sustainability for sunlight and the ability to continue to keep the form without sagging.

For this method, finishing is used mainly silk fabrics or satin. The canvas are glued to the prepared surface with strips of jack, like wallpaper. It is important to use special glue, not leaving divorces and non-changing fabric structure.

Silk for pasting ceiling can be both monophonic and sting with a bright pattern. Light tones visually increase the ceilings and expand the premises, give it a soft glow, especially in combination with directional or point light. Bright colored fabrics allow you to achieve originality and attract attention.

Advantages of ceiling pastries with cloth:

• this finish looks stylish and rich;
• environmentally friendly material, does not highlight harmful substances and does not violate the air exchange;
• does not fade over time;
• does not lower the ceiling level;
• easy to attach yourself.

Disadvantages:

• it is necessary to align the draft ceiling;
• the fabric can not be removed for washing and cleaning;
• we need a thorough choice of material.

Casting cloth can be used in almost any room, from the office to the bedroom, it is important only to choose the right to choose the shade and pattern. Reception of finishing with silk Designers are often used in ceiling niches in combination with wooden beams. It is often combined with wall decoration, columns or decorative inserts.

Note! When choosing color silk, it is important to take into account the size and the overall style of the room. A large and bright drawing visually expands the room, and the petty feed gives it comfort. At low ceilings it is better to use light pastel tones.

Fabric ceiling technology

First you need to draw a sketch and decide on the method of fastening the tissue canvas, as preparatory work depend on it, and the finishing technology itself. After selecting the design of the ceiling, you can proceed to the calculation of the material and the choice of fabric, as well as to the purchase of the canvas and the concomitant materials.

Technology fastening tensionable fabric ceilings

The textile ceiling can be ordered in a specialized company, and in the presence of tools and skills to install yourself. This work is not so difficult, it is only important to observe the technology of stretch and exercise accuracy.

Ceiling profile prices

ceiling profile

Required materials and tools:

• polyester cloth or other suitable fabric;
• guide baguettes with clip;
• perforator or drill depending on the material of the walls;
• measuring tools, scissors and knife;
• laser or bubble level;
• special blade to refuel the cloth into the baguette;
• a greasy tool for removing the old trim and preparation of the ceiling.

Stages of work and installation technology are described in the table.

Table 1. Installation of fabric stretch ceiling.

Steps, illustration	Description of action
	Under the tissue ceilings there is no need to level the surface, it is enough to remove the old peeling coating or finish. Blooming or paint is removed with a spatula or special washing. Wallpapers are removed and wash off the remnants of glue. Close up of cracks, seams and cavities with alabastern or cement putty. Suspended structures are completely dismantled, the holes from the fastening of the frame are sealed with putty. If this is not done, the sound insulation of the ceiling will worsen.
	For the ceiling to be smooth and strictly horizontal, careful markup is needed. It is more convenient to use the laser level, but you can do and bubble. Marking starts from the lowest angle. Return from the ceiling at least 5 cm and spend horizontal lines with a pencil or marker using a level on both adjacent walls. Conduct to corners, put a mark in them. They carry out lines in the same way to the last corner, ideally, they must come together at one point.
	As guides, it is convenient to use special baguettes for stretch ceilings from plastic or aluminum. They are equipped with special clamps - clips, under which the canvas are filled with a spatula or blades. Guides are attached by pre-applied markup with dowels and self-tapping screws. The holes in the wall make a drill or a perforator after 30-40 cm.
	Mounting platforms or special fittings are installed for lamps.
	The fabric for the stretch ceiling must be carved by the size of the room with an allowance of at least 20 cm on each side. The fabric, unlike the PVC-canvas, does not have good elasticity, it will not stretch it. Therefore, it is important to correctly calculate the desired width and make the tissue. The canvas from the specialized material are usually selected by the width of the room, and the length is rolled along the place directly from the roll.
	The canvas is straightened and aligned so that the same tissue allowed remains from all sides. Rates from an angle at least half a meter, the web is temporarily fixed in a baguette in a step of 0.5-0.7 m without a strong stretch around the perimeter of the room. The fastening of the tissue ceilings begin with the middle of the short walls, then the long, the corners are filled with the latter bugs. In baguette, the fabric is filled with a rounded spatula.
	Gradually tightening the canvas, it is aligned and stretched to an elastic state. Surplus are cut by the mounting knife or scissors. Under the knife when trimming it is convenient to substitute a wide metal spatula - it will protect the cloth and baguette from damage. The remnants of the canvas after trimming the spatula refuel into the baguette.
	The slot between the baguette and the wall after the end of the ceiling and wall finishes are closed with decorative plinth.
	Fixtures are installed, for which the holes of the desired size are cut in the canvas. The glue is applied to the mounting ring, it is glued to the canvas at the place of the lamp so that the centers of the ring and the lamp coincide. After the ring grabbed the cloth, the material inside the ring is neatly cut. The height of the lamp is regulated so that it is at the level of the ceiling panel, after which the lamp is screwed. It is desirable to use conventional lamps with no more than 60 W or halogen lamps up to 35 W to avoid strong local heating and deformation of the panel in the lamp region.

Video - installation of stretch ceilings

Fabric stretch ceilings can also be mounted on wooden bars installed around the perimeter of the room. In this case, the fabric is fixed on the guides by the construction stapler, and later the attachment site is closed by a plinth or a decorative baguette of polyurethane.

Draped Ceilings Installation Technology

Unlike smooth ceilings, draped webs are not necessarily tightening, they can form waves, folds, and if collecting a fabric in the center of the room - a cozy tent. You can also pre-mount on the ceiling frame and give the ceiling the relief and bends in the right places.

The photo presents various forms of drapes.

To work, you will need:

• wooden bar 20x40 or 40x40 mm depending on the density and weight of the fabric, as well as the size of the room;
• drill and hardware for mounting bar to walls;
• electrolovik;
• measuring tools and levels
• fabric of one or more species;
• elastic or ribbon for the porter, allowing to make smooth folds;
• construction stapler;
• polyurethane decorative baguette and small nails for attachment.

Calculation of the size of the tissue for drapery is a fairly difficult task that depends on the shape of the drapery. In order not to make a mistake, it is better to draw the sketch of the ceiling on the scale, then carve out the intended canvases from soft paper on the same scale, folded them with harmonica and decompose the ceiling drawing. The larger the folds, the more denser there will be drapery. You also need to leave the tissue allowance for fastening to the guides.

Preparation of the ceiling before installing the draped fabric is carried out similarly to stretch ceilings. If the cloth is selected translucent, and the ceiling has an inhomogeneous dark color, then it is better to pre-paint or sharpen with a light composition. The marking of the walls under the guides of the bars is also performed according to the above technology.

Mount the draped ceiling according to the instructions below.

Table 2. Mounting technology draped ceilings

Steps, illustration	Description of action
	Cut bars of the desired size with a hacksaw or jigsaw. The small holes and a step of 40-50 cm are drilled in them, through them the wall is placed, attaching a barn with a lower edge to a predetermined line.
	On the markup, drilled in the wall of the hole, score a dowel in them, after which the bars to the wall are attached by self-draws. If you need to create a challenge ceiling, a frame of the desired design is made of the bar.
	Perform cutting selected fabric. To make a simple longitudinal drapery, on the two opposite sides of the canvas are sewed with a lumber or a curtain ribbon. With it, you can collect fabric in smooth folds. For the ceiling device in the form of the tent, there are several material strips of the same width. You can use the canvas of different shades, it will give the tent an additional charm. One side of the band is collected, and the second is uniformly distributed in the width of the sector.
	Close the corners of the fabric to the bar with a stapler and evenly distribute the folds. Fix the canvas around the perimeter. For dense fabric, it is possible to use a stapler, the thin is better to press the wooden plank to the bar and nail cloves.
	Baguette from polyurethane is attached to a bar with carnations or self-tapping. It is impossible to mount it on glue by ordinary technology - it will not hold on to the folds of the fabric. Plinth or baguette you can give any desired shade, covering it with paint. Paint and dried baguette before installing in place so as not to stain fabric. After installing the nail cap neatly tinted.

In the case of a multilayer ceiling device, the first layer of dense tissue is tensioning without draperies, the second, made of transparent material, drape and fasten right over the first. Such a ceiling acquires depth and soft flicker, especially when the backlight is arranged from the LED tape.

Prices for ceiling lamps

ceiling lamp

Fabric ceiling technology

Fabric pasting is not much different from the ceiling finishing with wallpaper. The preparation of the surface at the same time should be more thorough, otherwise the fabric will not hold onto the ceiling. The fabric for pasting ceiling must be strong enough and not deform when tensioning, otherwise the strip will fail and sticking them to the jack will not work. For this reason, natural or artificial silk are often chosen.

Required materials and tools:

• silk or satin durable fabric;
• glue or mastic suitable for fabric stickers;
• malyal tool for putting and equalizing the ceiling;
• roller of foam rubber for applying glue and hard roller for alignment;
• scissors and measuring tools.

Table 3. Ceiling pastry with cloth.

Steps, illustration	Description of action
	The fabric glued to the ceiling will identify all irregularities and defects, so it takes careful preparation. First you need to carefully remove the old coating, after which it is frozen all the gaps and seams. The ceiling after that is aligned with a putty. Dry and apply the appropriate composition.
	The selected cloth must be checked for shrinkage. To do this, a small piece of fabric is measured, wrapped and dried in room conditions. We again measure and calculate the shrinkage. If it is more than 5%, the fabric for finishing will have to first wet and dry or try with the ferry. Otherwise, it can give shrinkage when sticker and disappear.
	Cutting the tissue on the strips is carried out only after checking the shrinkage, leaving the allowance of 10 cm. If a large drawing is applied to the fabric, you need to adjust it in advance and taking into account this cloth. Fabric bands are better rolled into rolls, the latter are put on the rod and the sticker gradually roll. It is more convenient to do it together.
	To glue the fabric, you can use casein glue, special mastic or furniture thermoclay, frozen with thermal effects. In this case, the fabric will have to warm up the construction hairdryer. Prepare glue according to the instructions. Apply it to the ceiling with a roller, apply a tissue band and align it with a roller. The next band is glued and diligently rolled the seam with a roller. Cut the remnants of the fabric by the walls. Dry glue or mastic according to the instructions. The shelves of the ceiling and walls are separated by a decorative plinth or baguette, fixing it on special glue.

The cloth can be separated not the entire ceiling, but only individual sections. This technique can be used in the zoning of the premises.

Note! When heating and bright lighting, the fabric can fade and change the shade. When choosing lamps, it is better to give preference to LEDs or chandeliers in which incandescent bulbs will be located at a sufficient distance from the tissue finish.

The ceiling, decorated with cloth for any of the above technologies, looks quite effectively. He will decorate any room of your home and will create a unique comfort in it.

Fabric ceilings belong to the most stylish and original types of finishes. Thanks to the rich selection of colors and textures of decorative canvases, it is possible to choose the appropriate design option for any interior style.

Varieties of fabric ceiling finish

There are several ways to equip the fabric ceiling with their own hands. Stretch systems, draped tissue canvas and silk gluing on the ceiling surface are most popular.

Stretch systems

As a decorative canvase, a special material based on synthetic tissue impregnated with polyurethane is used here. For fixing, special baguettes and clips are used. The frame is mounted on the walls around the perimeter of the room.

Strengths of tension structures from fabric:

• No need for the preparation of the basic ceiling.
• The finished surface is perfectly smooth.
• The fabric canvas demonstrates excellent strength characteristics, which allows him to serve for a long time.
• Fire safety material.
• High decorative characteristics.
• The possibility of laying hidden communications on a draft basis.

Weak sides:

• Scarce color palette. The range of fabric tensioning canvases consists of basic colors and shades.
• It is possible to design the surface with drawings only by completion of the installation work.
• For installation, you will need certain skills to work with tension structures.
• In case of disassembly, the re-use of the stretch canvas is not possible.

Stretch fabric systems are excellent for premises with classic interiors. Thanks to this decoration, a soft and unobtrusive emphasis is achieved on the design of walls and interior items: the fabric for the ceiling does not distract attention. Most often, fabric stretch ceilings can be found in the living room, office, bedroom and other rooms with strict circuits and muffled color.

If there is a high level of humidity in the room, the tensionable tissue systems is better abandoned. The fact is that this material is inclined to accumulate condensate and dust: as a result, the decorative surface in such conditions will be quickly contaminated. The same applies to the kitchen, smells and fat of which begin to be absorbed into the porous structure of the canvas. This quickly leads to the loss of finishing of the original freshness.

For the manufacture of stretch ceilings began to practice the use of natural tissues. At the same time, they are trying to select the cloth of such sizes in order to minimize the number of seams. Most often we are talking about porter tissues.

Drapery

The drapery of the ceiling provides for the possibility of using almost any variety of fabric, including smooth silk and translucent chiffon or organza. Through the use of different textures, it is possible to achieve the creation of a wide variety of effects, telling the finishing of interesting forms and bends. Significant distribution received two-layer systems: it is practiced to install over a smooth tension surface made of dense tissue of unusual drapery from a translucent flickering material.

Thus, you can make the entire ceiling or individual sectors. For fixing draped structures, brackets or small cloves, sticky tape or wood frame are usually used, with its subsequent installation with a cloth.

Strong sides of the draped ceiling cloth:

1. No need for the preliminary alignment of the base surface.
2. The ability to independently arrange the design, for which special construction skills will not need.
3. Easy care. The decorative canvas is easily dismantled for cleaning or replacing.
4. Resistant transfer of mechanical influences.
5. Wealth assortment. This applies not only to color, but also drawings and textures.
6. Low cost. For little money, it is possible to get a very spectacular and original finish.

Weak sides:

1. Close space. Like all other frame systems, after drapery, the initial height of the room is somewhat inclined. As practice shows, it is best to apply this kind of finish in rooms with ceilings with a height of 270 cm.
2. Danger of fire. This imposes additional responsibility to choose from lighting and installing wiring.
3. A tendency to absorb odors. For this reason, the drapery of the ceiling is trying not to use in kitchens or indoors with sharp odors.

Most often, the finishing of this type is used to communicate a room of a larger coziness and a home atmosphere. We are talking about bedrooms, children's, living rooms or canteens. In some cases, drepacing an open veranda or terraces is allowed, however, when winter occurs, the fabric from the frame is desirable to shoot.

Draped ceilings well support the eastern direction in the design of the premises. In addition, the systems are successfully combined with the "Ampire" style, Country or Provence. In the children's room, the use of fabric helps to create a fabulous atmosphere: To do this, it is necessary to choose a web with the necessary motifs. When placing the ceiling, the fabric stop needs to be done on materials that resist the solar rays and are not prone to gradual deformation.

Sticking

This type of finishes involves the use of mainly silk fabrics or satin. Initially, the basic surface is prepared, after which shelling cloth jack is carried out. Glue can only be applied special, after the use of which on the front of the tissues do not appear divorces and stains. Also, it should not change the structure of the material.

Silk for decoration choose not only one-hand, but also sting with a bright pattern. With the help of light tones, you can achieve a visual increase in the height of the ceilings and the area of \u200b\u200bthe room. When using spotlights, a soft glow appears in the room. With the help of bright colored fabrics, the interior acquires originality, attracting universal attention to itself.

Strengths of sticking fabrics on the ceiling:

• High aesthetic characteristics. The decoration of this type looks stylish and rich.
• Environmental purity. The material is no harmful to the health of people components.
• Air permeability. After sticking the fabric, the ceiling does not disrupt the air exchange.
• Resistance to fading.
• There is no danger of understating the ceiling level.
• Easy installation, which allows you to realize it yourself.

Cons finishes:

• The need for preparatory activities on the base surface.
• The impossibility of dismantling is washing and cleaning.
• Responsibility in choosing suitable canvases.

Ceiling pastry fabric is suitable for almost any room: the main thing is to correctly select the combination of shades and patterns. The silk fabric for the ceiling in the apartment is mainly used by designers for the design of ceiling niches in combination with wooden beams. A good option is to combine with wall decoration, columns or decorative inserts. Selecting color silk, taking into account the size and the overall style of the room. With the help of a large and bright pattern, you can see the visual expansion of space. A small stinging pattern will make a room more cozy. In rooms with a small ceiling height, it is recommended to use light pastel colors.

Choosing a fabric ceiling option

Considering the various options for mounting the ceilings from the fabric with their own hands, it is necessary to study the features of the room. Its parameters, the basic base material and the features of wall decoration are of great importance. Deciding with the design of the ceiling, go to the calculation of the material and the choice of tissue. In this regard, the pre-compiled sketch of the ceiling construction is well helped.

Installation of tension systems from fabric

Textile canvas is better to order from a specialized company that is able to provide a certificate for its products. As for the installation of the tension ceiling from the fabric with their own hands, then if you have the necessary tools and a certain experience, it is not so difficult. The main thing is to strictly follow the installation instructions and do not rush.

• Polyester canvas or other suitable material.
• Installation baguettes with clip.
• Perforator or drill. The choice is influenced by the material of the walls of the walls.
• Measuring devices - roulette, square, level, line.
• Special device for laying the canvas in baguette.
• Set of spatulas, scrapers, painting brushes and roller.

Operating procedure:

1. Preparation of the base surface. The base under the tissue system does not need preliminary alignment. The main thing is to clean it from all peeling fragments. Scraper or special washes are used to remove whitewash or paints. Wallpaper, it is advisable to first wet, removing the remnants of glue along with them. For climbing cracks, seams and depressions are used by alabaster or cement putty. If there are suspended structures, they must be completely removed, chopping the holes from the screws with putty. This will make an order to increase the sound insulation of the ceiling.
2. Marking. To achieve evenness and strict horizontal of the new finish, it will take careful markup in the level. It is best to apply a laser level (with the absence of bubble). The markup point of the markup is chosen the lowest angle. An indentation from the basic overlap must be at least 50 mm. To apply horizontal lines on two adjacent walls, a pencil or marker is used. When moving to the other side, a mark is set: Ideally, the markup must come together at one point.
3. Installation of baguetov. The set of suspended ceiling made of fabric usually includes plastic or aluminum guides for stretch ceilings. They have special devices - clips: When laying under them, the canvas will need a spatula or blade. Installation of baguettes is carried out at a pre-applied markup on a dowel and self-tapping screws. For the manufacture of holes, a drill or a perforator is used. The optimal distance between the mounting points is 30-40 cm.
4. Arrangement of mortgages under luminaires. In order for the lighting devices to keep securely, special lining (platform or fittings) are made in the installation sections.
5. Preparation of the web. The tensioning fabric enters the roll and needs to be outraged by room size. It gives a reserve 200 mm on each side. It is important to consider that the elasticity of the tissue canvas is noticeably inferior to the PVC film, so they will not stretch them. As a rule, the canvas from the specialized material are bought taking into account the width of the room. Condition in length is carried out at work.
6. Fabric pulling. Before tightening the fabric ceiling, the canvas need to straighten and align. It is important that for each of the sides it turned out the same stock material. Having made an indent from an angle by 50 cm, it is carried out temporary fixation of the tissue in a baguette with a step of 50-70 cm. The tension at this stage is not yet carried out. The fastening procedure is best started from the central zone of short walls. Next, go to long, and the angles refuel the last. For laying the material in the guide, a special rounded spatula is used.
7. Circuit and final fixation. In the course of tightening the fabric, it must be aligned, informing it a certain elasticity. A mounting knife or scissors are used to cut the extra parts. To avoid damage to the canvas, under the knife during trimming is put a wide metal spatula. The cloth remained after trimming should also be fed to the guide.
8. Installation of decorative plank. In order to close the gap between the baguette and the wall, after tensioning the web, the decorative plinth is made.
9. Installation of lighting devices. For this, the cloth needs to be equipped with a series of holes of the desired diameter. To avoid tissue break, each of the holes is fixed with the mounting ring. It is glued in such a way as to achieve the coincidence of the centers of the ring and the lamp. After setting the rings with the cloth of the fabric residue inside the nozzle, you must carefully cut
10. Setting the height of the lamp. It must be adjusted so that the base of the lamp is at one level with the decorative ceiling. When selecting lamps, it is recommended to give preferences with a capacity of no more than 60 W. A good option is halogen lamps up to 35 W: they are almost not hot, which avoids the deformation of the tissue.

Arrangement of draped ceilkov

Draped canvases do not need a tight stretch, like smooth systems. According to the idea, their surface should be covered with waves and folds. To obtain the tent, the fabric is collected in the center of the room. Relief drapery is achieved using a frame design that allows you to create bends in the right places.

List of materials and tools:

1. Wooden bar 20x40 or 40x40 mm. The choice of a specific option is affected by the density and weight of the web, as well as room parameters.
2. Drill and drill set. Brucks need to be fixed to the walls.
3. Electrolovik and measuring devices (roulette, level, square).
4. Fabric cloths (one or more species).
5. Rubber or tape. These elements make it possible to create smooth folds.
6. Building stapler.
7. Decorative friezes and polyurethane and small fastening nails.

When calculating the size of the canvas, the drapery configuration is taken into account. Make it is not so easy. To protect yourself from errors, it is recommended to make a sketch of finishing on a scale. Next, cutting out of soft paper imitation of cloths, they are folded by a harmonica from above sketch. To create large folds, a dense tissue will be required. Boxes are left on the sides for fixing to bugs.

Preparatory activities before draping as a whole resemble a similar procedure for the tensioning system. When using translucent fabrics, you need to take care in advance so that the transmissive base base has a homogeneous (preferably white) color. The walls under the guide bars are also placed according to the order described above.

Drapery order:

1. Preparation and installation of bars. To cut bars in size, a hacksaw or electric jigsaw is used. The guides are equipped with a series of holes in a step of 40-50 cm: wall marking is carried out through them. Drilling the intended points of the holes, scored a dowel in them. It makes it possible to screw the bars on the tapping screw to the wall. If the project provides for the creation of a complex ceiling, bars are used to create a frame of the desired configuration.
2. Cutting fabric. For the arrangement of simple longitudinal drapery, the two opposite sides of the fabric are equipped with a liner or a curtain ribbon. After that, it appears the opportunity to collect canvas smooth folds. To build the imitation of the dome, we cut out several tissue pieces of equal in width. To achieve the originality of the finish, the use of multi-colored strips is not rarely practiced. One part of the strip is going, and the second is organically distributed across the width of the sector.
3. Fixation of the web. A stapler is used to fix the corners of the fabric to the bar: it is important to achieve uniformity in the distribution of folds. When fixing the dense panel on the perimeter, the stapler is also suitable. For thin fabric, a more suitable option will be a narrow wooden plank, nailed to the bar with small cloves.
4. Installation of Bagueta. Polyurethane baguettes also need to be attached to cloves or self-tapping screws. Use the adhesive is categorically not recommended, because Finished folds straighten with time. By installing the plinth, it can be painted in any desired color using acrylic paint. At the same time, it is necessary to observe the known caution so as not to be stained fabric. It is also tinted nails.

How to beat the fabric on the ceiling

Operating procedure:

1. Preparation of the foundation. Basic surface must be prepared very carefully, because On the glued fabric, all the irregularities and defects are well designated. Preparatory activities in this case are very similar to the preparation for wallpaper. In addition to removing the old finish, it is necessary to align the surface, putty, grinding and applying the primer.
2. Cutting the web. When choosing a tissue, it is necessary to give preference to materials that do not give a shrinkage. If the manufacturer indicates the possibility of shrinkage more than 5%, the cloth before sticking is pre-wrapped and dried with iron. Running the tissue on the strip, the edges are left for 100 mm. Material with a large pattern will need a thorough fit of individual bands. Finished pieces for convenience are folded into rolls. When sticking, they are put on the rod and gradually roll off. Work best with a partner.
3. Stowing. As a mounting mixture, casein glue, special mastic or furniture thermoclay (it is frozen only as a result of heating) is allowed. To do this, you need to stock construction hairdryer in advance. The preparation of glue is carried out according to the instructions. For fading on the base use roller. After that, you need to immediately attach a tissue strip and dissolve from the folds and air bubbles. The adjacent strip is stacked with a thorough press of the seam with a rubber roller. Slices of fabrics that wrapped on the wall need to cut off. After the entire ceiling is stuck, they pause to dry out.

For a beautiful design of the stakes of the ceiling and walls, a decorative plinth is used, which is fixed with mounting glue. The fabric can be pasted on the whole ceiling, and you can only on a separate sector: This approach allows you to divide the room on the functional zones.

An increasing number of people prefer stretched ceilings made of organic tissues. The fact is that such canvases are durable and do not require specialized care. In addition, stretch ceilings from the fabric harmoniously fit into the interior of any room. Create a suspension design in several ways. Before starting to install, you need to install a specialized framework.

Fabric stretch ceilings need to be installed on specialized baguettes. For the installation of the fabric cloth on the ceiling, the baguette clip is most often used. However, this mount is suitable only for seamless cloths. In other cases, it is more expedient to use stroke baguettes. Mailing the stroke system with your own hands is much easier.

Baguettes differ in the material from which they are made. Fasteners can be made of plastic or aluminum. If your budget is not limited, it is recommended to give preference to aluminum baguettes, as they are more reliable and durable.

Baguette installation technology:

1. Align the ceiling. If necessary, apply primer and putty to the surface. Do not forget to eliminate the big potholes with the help of sealant. Only after the preliminary finish is completed, you can start the installation of baguette.
2. Purify the desired value. To do this, use the hacksaw.
3. Drill holes in the walls.
4. Attach baguette to the wall.
5. Do in the wall of the hole. To do this, use the perforator.
6. Secure the baguette with specialized dowels. Only then you need to install a cloth from the fabric.

Mount the tension fabric ceiling with your own hands

After the installation of the baguette is over, you can start tensioning the web. Before starting work, make sure the integrity of the drapery. You also need to make sure the carcass strength and prepare the necessary tools.

If you plan to install a fabric fabric in rooms with high humidity, such as in the basement or bathroom, then use a wedge-shaped fastening system made of plastic.

The installation order of the tissue canvas:

• Get the edge of the canvas in the baguette. At the same time, remember that approximately 10 centimeters of drapery should come out.
• Using a blade, lock the cloth.
• Evenly stretch the fabric in other parts of the room.
• Cut the surplus of the fabric with a hacksaw.
• Baguette Close the special decorative plinth.

We carry out the repair of the fabric old stretch ceiling

Repair of the ceiling of fabric is a simple process. Repair such a design is much easier than mounted ceilings from PVC or drywall. Before starting repair, you should dismantle the tensioning canvas.

In case you were flooded with neighbors on top, dismantle the canvas at all. It is enough to carefully unscrew the lamp, and drain the water through the resulting hole. Do not forget to pre-turn off the electricity.

The order of dismantling the design:

1. Disconnect electricity.
2. Remove the bulbs.
3. Using the spatula, remove the profile. If you used plastic blades, then you need to first remove the insertion, and only then get the profile.
4. Remove the cloth.

Installing seamless fabric ceilings CLIPSO

The canvas manufactured by the French company CLIPSO are very popular due to beautiful appearance and durability. In addition, the installation of such crafts is carried out in a matter of hours.

Before installing seamless ceiling, you need to handle walls and ceiling. It is recommended to degrease the surface and close all cracks. If you wish, apply a primer layer on the walls and ceiling. If you install seamless ceilings in a wooden house, then process the surface with an antiseptic solution.

Seamless ceiling installation order:

• Install baguettes on the walls.
• Secure the cloth with a bug-clips. Remember that the fabric should perform from the baguette by 7-8 centimeters.
• Fix the fabric throughout the perimeter of the room. Make sure that the cloth is located symmetrically.
• Eliminate all the folds on the canvas using a construction dryer.
• Surplus fabric cut with a hacksaw.

Drapery Ceiling with your own hands: Characteristic features and advantages

Drapery of the base surface with the help of a tissue- interesting designer solution. With this method of finishing, you can decorate almost any room. Due to the manifold of texture and colors, the fabric canvas can be used to finish a room weathered in any style.

The canvas can be made of:

1. Flax. Such drapery will look elegant and low.
2. Silks. The canvas made from this material is advisable to use for the ceiling finish, if your room is supposed in the classic style.
3. Cotton. Such drapery will perfectly fit into the bedroom interior.
4. Jute.
5. Cars.
6. Velvet.

If you decide to use a canvas made of silk, jute or canas, then it can be fixed with glue. Remember that glue should be applied to the ceiling with a thin layer. After you attach the cloth to the ceiling, smooth the cloth with a dry napkin. This technique will help to avoid the appearance of folds and irregularities.

Advantages of drapery:

• The canvas perfectly retain heat.
• Drapery is not deformed over time.
• The canvases do not require special care.
• Installation is carried out quickly. In addition, the installation does not require the use of heat gun.
• Drapery will help hide the cosmetic defects of the base surface.

Draped Ceiling Table Design (Video)

Installation of the stretch cannon on the ceiling is a simple process. The main thing is to choose the appropriate baguette and fabric texture. If you decide to establish such a design yourself, then perform communication in the undercover space in advance and eliminate the irregularities on the base surface. When choosing a color range and cloth textures, follow your own preferences and design of the room.

Modern fabrics allow you to perform unusual forms of ceilings and change to unrecognizable any room. Consider what is the drapery of the ceiling by the fabric, the features of the mounting of the canvas and popular decoration styles.

The content of the article:

Tissue ceiling is a ceiling surface decorated with matter, which is considered an alternative way to design overlap. The main task of drapeting the ceiling cloth is to add harmony to the interior and create a coziness indoors. To obtain the desired result, adhere to certain rules for the selection of tissue and the design of the design with which we will now meet.

Advantages and disadvantages of fabric ceilings

Ceiling decoration with cloth has become popular thanks to the numerous advantages of this method. Benefits of overlap drapets:

• It does not require pre-processing of the base base, because the web is attached usually along the edges and does not concern the surface of the overlap.
• This is one of the few ways to decorate the ceiling that does not require construction skills.
• The fabric covers the unsightly type of overlap.
• To the base ceiling, you can fix the wiring, cables and communications, which then closes the web.
• Tissue ceiling has good thermal insulating properties.
• Falsepotor is not easy to damage, small defects are invisible.
• The ceiling decorated with cloth is turning into an exclusive artwork.

In addition to obvious advantages, fabric ceilings have disadvantages. Matter has a porous structure and does not hold water. With prolonged wetting, the tissue changes the color, an unpleasant smell appears. The fabric absorbs the surrounding smells.

Designer Features of fabric ceilings

The canvas allows you to create interesting design effects on the ceiling, which must match the overall interior of the rooms. To select the optimal option, examine popular ceiling drape methods.

The ceiling in the form of a tent looks good if the walls are decorated in the appropriate style. Such a type of drapery looks good in self-execution. The tental coating significantly reduces the height of the ceiling near the walls and cannot be used in any rooms. For better perception, it is desirable to make a photo of a tissue ceiling, made in the shape of a tent.

The wave-like ceilings are manufactured using additional suspensions. Matter for similar designs is suitable any, but it is better to use translucent and not very severe species.

The method of installing a tissue ceiling "From the walls to the center" has many variations. For example, a cloth made of soft material can be switched to sagging or pulling stronger before the formation of a large number of flat folds. Usually in the center of the composition have a chandelier to obtain a semantic center.

Selection of fabric for drapery ceiling

The tissue ceiling device is very simple: the canvas for creating a false-brake and frame for its mounting. Very often, the canvas are finalized to install lamps, and rails, tubes or other elements for creating a embossed surface are added to the base ceiling or frame. Information about drapery tissues and profiles is shown below.

Requirements for matter for the upholstery of the ceiling

There are practically no restrictions on the choice of fabric to drapery, but there is a practical side of the task. Matter for the ceiling must have the following properties:

1. Do not change strength quality and appearance under the action of sunlight.
2. Do not lose the form and color after numerous washes.
3. Matter should not blame too much.
4. Choose elastic tissue.
5. Do not use materials that possess the "Collect Dirt" property.
6. The choice of type of fabric also affects the user's desire to use material with certain properties.
7. Fabric from natural components (flax, cotton, wool) is perfectly combined with wooden elements of the room. In addition to decorative functions, it has good heat and soundproof characteristics.
8. Fabrics for drapery should be treated with antistatic and anti-allergenic agents and substances that repulse dust. After impregnation, the material is not afraid of sunlight, has a high degree of wear resistance. All types of fabrics are subjected to such impregnation - natural and synthetic.

Types of fabric for drapeting ceiling

Among the customers are popular with such cloth ceiling options:

• Linen. The coating is obtained beautiful and good. Canvas does not savor over time, it does not stretch when installing. During cleaning from the surface, dust is quickly removed.
• Jacquard. Returns comfort and respectability.
• Thin silk. Always creates a feeling of sophistication and celebration.
• Cotton. Associated with calmness.
• Chiffon. Use in bedrooms and children's rooms. It gives the ceiling lightness and airiness. Matter does not stretch after mounting, dust is not going on her surface
• Exotic jute. Helps create original styles.
• Beautiful Rogozhka.. Combined with a country style.
• Brocade. For the ceiling, the material of bright shades is used. Noble heavy tissue is used to decorate the living room or hall.
• Fabric in the Christmas tree. Suitable for any design.
• Canvas. Carries the feeling of unshakable well-being.
• Velvet. Admires luxury.

Some types of materials have sound absorption properties, water resistance, such as leather, tapestries.

Color range Ceiling Cleaning

Various colors and drawings of the fabric create effects visually changing the forms of the room, and are also able to influence people's emotions. To decorate the ceiling, fabrics are used with any structure - brilliant and matte, transparent and dense, monophonic and with drawings.

Colors choose depending on the purpose of the room:

1. If the color of the ceiling is darker of walls, it will put pressure and how to hang over you.
2. Fabric with transverse stripes stretch in narrow rooms. This design visually increases the space of the room, but reduces the height of the ceiling.
3. The ceiling with a longitudinally located pattern or stripes increases the height of the ceiling.
4. Small drawing on the ceiling makes a room cozy.
5. The canvas with large drawings is not recommended to be installed in small rooms.
6. Light ceilings form the illusion of increasing the indoor space, dense and dark colors create the opposite effect.
7. The red color of the canvas raises the mood, but some people may cause irritation. The fabric of this shade is never used in rest rooms.
8. Yellow is useful for the eyes, stimulates the nervous system.
9. In rooms with green ceilings you can relax, relax. Green worldwide is considered relaxant. He calms down, reduces pressure and has a positive effect on the heart rhythm.
10. With blue ceilings work well, lethargic and apathy goes.
11. Purple color sets up on reflections, but the eyes are quickly tired.

Preparatory work before the upholstery of the ceiling with cloth

Features of preparation for the installation of the fabric ceiling:

• Fabric before draping should be prepared. Cut a small piece from the main canvase and measure it. Water the matter, dry it and measure it again. If the size has not changed, you can start the drapery of the ceiling. When measuring the size, all the fabric should be tracked - wet, dry and stroke.
• It is advisable to use one piece of canvas to get a seamless ceiling. If you failed to get a wide web, the matter is stitched, and then stroked, especially carefully handled in places of connection.
• Before work, wrap the cloth on a long pole, it will make it easier to assemble the design.
• Mount the ceiling is best together: one holds the roll, the second creparates the canvas to the frame or ceiling.

Tissue Ceiling Mounting Technology

You can fix the material to the ceiling as you like, but all options will be modifications of the most popular attachment methods.

The frame method involves the installation of the structure on the floor, followed by mounting to the ceiling. The frame is collected from wooden or plastic rails. Usually this method is used to obtain flat designs or products with a slightly saving web. The frame ceiling can be found for overlapping using special devices. In this case, you can adjust the height of the ceiling. One of the varieties of fabric ceilings made by a skeleton method is called the bucket. They are sold in the form of ready-made fabric or leather panels that are manufactured to order. The user remains only to secure the product to the ceiling.

Fastening tissue with rails involves the use of wooden or plastic bars with a size of 30x40 mm, which are first attached to the ceiling without matter. Wooden designs are used in rooms, plastic - in the kitchen, in the bathroom or toilet. For drapets, a canvas with 20% are applied. In this way, the tissues of pastel shades with gilded or silver threads are fixed.

Fastening fabric on the rails is performed in the following sequence:

1. Lock the rails around the perimeter of the room near the walls with the help of dowels and self-tapping screws.
2. Tensioning the cloth from one wall to another, across the entire width of the room, check the absence of waves on the canvas.
3. Secure the cloth to the brackets with brackets, starting with the middle of the wall and moving towards the corners, gradually unwinding the cloth from the roll. For fixation, use brackets No. 8, 10. Staples, do often, so use the electric stapler.
4. After fixing the canvas on one side of the room, go to another. At the end of the work, the fabric should not be saved.
5. Measure the gaps between the rails and walls and cut the decorative panel from MDF.
6. Close the slit prepared panel. Traces from the bracket can also be masked by a tape, and instead of the MDF plate, use the ceiling plinth.

Clipstick installation of tissue ceilings involves fastening baguettes to the walls, and then fixing the canvas. This method is used to obtain volumetric and air ceilings. Synthetic fabrics are usually fixed with a clips. The mounting of the clips in clips is no different from the method of fixing the film of stretch ceilings. Before assembling to the edges of the canvas, a ribbon with a clip is sewn, which snaps to the baguette.

Velcro is considered the easiest attachment method. The canvas holds on textile velcro fasteners, which are sewn on the fabric and glued in the appropriate places on the ceiling or frame. This method allows you to quickly remove the cloth and decide the question forever how to make a tissue ceiling folding. The option is not designed for massive structures, heavy velcro fabric may not withstand.

The glue method of the thoroughly is fixed to the ceiling silk fabric. The process resembles the gluing wallpaper, but the glue is applied only on the ceiling. The upholstery of the ceiling with cloth is performed in such a sequence:

• Align the irregularities of the surface with putty.
• If the ceiling is painted, go through the surface of sandpaper until the roughness is obtained.
• Clean the ceiling from dust and rinse with soda solution. When dark spots are detected, they will shine them so that they are not manifested later.
• Sprouter surface.
• Apply a layer of special glue on the ceiling and give him some time on the drying.
• Next, the canvas strongly press the ceiling and scroll the rubber roller. The following strip is pasted with the observance of the pattern of the web.
• The fabric begin to glue from the center of the room to the walls. If the matter is with a pattern, control so that it does not get down.

To the negative points of glue gluing can be attributed a long period of drying of glue and a non-disconnecting of the canvas from the ceiling, so until glue must be constantly monitoring the condition of the ceiling.

To obtain a ceiling in the form of waves or sails to the ceiling or walls, thin tubes or cords are fixed, and the canvas are thrown through them. Also beautiful waves are obtained in the case of mounting the canvas to the ceiling with the help of lipochk.

Watch the video about the drapery of the ceiling with cloth:

You can experiment with the drape of the ceiling with a cloth to infinity, the main thing is the material used and the design style must correspond to the interior of the room. All ways to decorate overlaps are quite simple and allow you to make a fabric ceiling with your own hands.