There are many professions in which various types of tools are applied. Most often for their storage boxes are purchased for tools, but sometimes the high-quality storage is easier to make it yourself

If you are interested in one or another kind of crafts, and you do not sit at home, folded up, naturally, you are going to have a sufficiently large number of tools. To your tools are always at hand and securely persisted, they need to provide a system of safety in the form of a separate closed space called the box For storing tools.In addition to preservation, the use of such a box will help very help, since the filling will be carefully sorted by compartments and in the future you can find the necessary fixture "blindly". Also, this device needs car owners, or rather the owners of trucks and gazelles. In the car, the box must be well fixed. And this means that when it is manufactured with your own hands, you need to think well where it will be in the car and how to fix it there.

Decide with two criteria:

• will you just keep in it tools, or do you need it for convenience of transportation?
• what sizes of tools do you intend to store it?

Classification of boxes

By case material:

• plastic - light by weight, comfortable in everyday life and for transportation;
• metallic - much harder plastic, but at the same time much stronger, more stable, have a tougher design, there can be no large size due to the severity of the metal;
• galvanized metal plastic - light, durable and spacious, suitable for both storage and transportation of professional tools. But all these advantages determine the corresponding price - it can be from $ 150 to $ 500 and higher.
• wooden - the most affordable material for making a drawer for tools. Especially since with their own hands it is easier to do from this material, or rather from plywood 10 16 or 18 mm.

By type of stored tools:

• hand tools are usually represented by one large compartment for large tools (screwdrivers, hammers, keys) and 2-3 small for smaller tools;

• the electric tool is a case that is functionally intended for the preservation and movement of a specific power tool. Most often has one main compartment itself for the device and several recesses for snap.
• organizers - boxes designed to accommodate a large number of different tool size. Have a lot of compartments, a model with modular partitions deserve attention, which for the convenience of the owner can be rearranged from one place to another.
• professional tool is a special kind of cases with certain seats for specific tools, more resistant to drops and adverse environmental conditions.
• unprofessional tool - represents drawers of both small and sufficiently large sizes with a variety of compartments, and niches for various kinds of tools, often this case in the form of bags.

There are many firms for the production of tools for tools, such as stanley, Fit-american firms keter. - no less popular Israeli firm, Spanish firm tayG, german Kroft.and many other, characterized in quality and cost of products.

As an alternative to all these firms - the ability to make a drawer for tools with your own hands. You can thus save at cost and get a completely competitive option that meets your requirements.

Types of boxes

Boxes for tools manufactured in homemade workshops are mostly made of wood, and they have a variety of forms. Popular and easy to manufacture classic boxes - "Lukoshko". In the second and third place, the box in the shape of a chest is a container, and in the form of a case.

Materials for making tools box

• wooden boards thick 15-25 mm
• round wooden rod of the desired length
• self-tapping screws, adhesive for wood, sandpaper stripping surfaces
• tool kit - grinding machine, electric road, electrolovik, screwdriver
• measuring Tools - Rule
• screwdriver, hammer

Stages of manufacture

Using such technology, you can make drawers of more complex structures, creating the required number of compartments and niches by rebuilding.

For the same technology, it is possible to manufacture a closed box, which is more reliable and convenient for transporting tools.

Additional steps in the manufacture of a drawer with a lid

For self-making popular now transformer boxes We'll have to break the head more, but it is quite realistic to carry out this idea.

To do this, with the help of computer programs, it is necessary to develop the desired design, to embody it in the reality you will help you a set of necessary elements that can be purchased in special stores. The number and complexity of the elements selected depends on your requirements for the box. The assembly can be made on a wooden base using aluminum strips and corners. Fasteners are made using rivets.

If you are a purposeful and creative person, then the process making Toolboxit will not be much difficulty, but seeing the fruits of this work, you will increase your self-esteem and save budget funds.

The storage box of various trifles and products is considered an indispensable attribute in modern farm. Thanks to this design, all things are in their place, while not forming a mess. For example, vegetables and fruits should be stored in a ventilated structure, where fresh air will be easily free.

Monolithic products are suitable for tools without any holes. For various trifles, structures with additional doors and folding mechanisms are suitable.

We offer original storage boxes made by your own hands. Here you will learn what materials and tools will be needed for the manufacture of these products.

What materials are used to build structures?

Most often drawers are made of wood and other materials. For tools, it is better to choose an array of pine or maple. Olha or aspen suitable for products. These breeds of trees are characterized by their durability and durability. They do not emit resinous discharge and do not lose weight after the expiration of time.

Plywood is suitable for making decorative products. Here you can accommodate all things. For fixing parts, special adhesive composition is used.

Master class on creating a drawer do it yourself

We offer step-by-step instructions how to make a box at home. To do this, you will need the following tools and materials:

• tape measure;
• simple pencil;
• 25 mm thick board;
• wooden trims with a thickness of 15 mm;
• thin plywood;
• metal corners;
• nails and selflessness;
• hacksaw;
• screwdriver;
• metal loops for opening the design of the lid;
• a hammer.

First of all, you must familiarize yourself with the schemes and drawings how to make a box. This will make it possible to properly compare the size of the finished product. Do not make too large structures, as they will occupy a lot of free space.

When all components are ready, you can proceed to the manufacture of a storage system for vegetables and fruits. The process includes several stages:

On the surface of the boards, we mark the size of the side parts of the product. Next, go to the bottom of the drawer. On wooden cuts, mark the size. After that, taking advantage of the hacksaw, start cutting blanks.

Boards fixed with each other with small nails. Details of the bottom Krepim on the same technique.

The cover of the product consists of a plywood sheet. It is installed on special loops that allow you to control the closing process.

In the photo of the drawer, the entire workflow is depicted with your own hands.

Tool Storage Box

This type of design is considered the best idea of \u200b\u200bthe drawer with your own hands. This product will keep the entire working tool in one place. Here you can make additional departments for the storage of screws, nails and nuts.

To do this, prepare:

• thin board;
• fat plywood;
• hacksaw;
• electric jigsaw;
• a hammer;
• screwdriver;
• tape measure;
• drawing of the finished product;
• metal corners.

On the sheets of thick plywood we make markup for the details of the box. After that, drills holes for fastening metal loops. Next, the side parts connect each other.

We start making the bottom for the storage system. To do this, a thin board is fed to the side parts of the box. So that it does not fail by the severity of the tools, it must be strengthened with thin boards. To do this, there are several wooden elements on the bottom surface.

In the side parts of plywood, blacksmith for the handles. They will be carved inside the main body of the product. Here you will need an electric jig. The cutting base is installed at the beginning of the markup.

In the process of cutting parts, you should not make sharp movements. They can provoke the appearance of cracks on the surface of the product.

Now proceed to the installation of partitions. To do this, cut out a small square from thin plywood. It is fixed with metal corners in the middle of the design.

The diagram shows a detailed image of the toolbox. The drawing shows a precise number of details:

• side parts - 4 pcs.;
• bottom - 1 pc.;
• partition wall;
• handles - 2 pcs.

Photo drawers do it yourself

Tell me honestly, how do you store your wood tools, saws, drills, clamps, nuts, washers and a bunch of other things that are necessary in the garage or workshop? I think many will answer: in plastic buckets of paint or cardboard boxes. Moreover, the "smallest" is usually stored as a "assorted" and when you finally need some small key or nut, you need to spend a fair time to detect them. Sometimes it is generally easier to buy new details than to detect old. Do you know this situation? If so, then I propose to make some simple and not costly storage devices for all the little things so that it is always in sight.

1. Storage of nails, screws, screws and other little things

For this, there will be plastic jars from under mayonnaise, horseradish, etc. The covers from under them are screwed to the horizontal surface of the shelf, and the jar with accessories screws into the lid. You can fasten the lid and to the vertical surface, and cut the jar in half.

2. Storage of nuts, washers, keys, scissors

It will take the thick wire and a perforated sheet of fiberboard, which is attached to the wall of the workshop or garage. From the wire we make hooks and loops with detachable ends, which we ride nuts or washers. You can attach cardboard labels to such bundles with the size of the fittings. Scissors and keys can be simply hanging on hooks.

3. Box for storage of nails, screws and other little things

Such a mini shelf can be made of plywood. And as shelves, you can use coasters from under cupcakes or pastry forms for baking.

4. Storage Drills, mills and keys

To the wall, you can attach a lining of foamed polyethylene or foam plastic, in which we do small holes for drills, cutters, etc. Due to the elasticity of the material, they will be firmly fixed in cells and easy to remove.

5. Storage of disk saws and grinding circles

For this purpose, we use plastic disposable plates, which cut in half and secure to the wall by self-draws. Very simple, comfortable and all at hand!

6. Magnetic boxes for trifles

We use plastic small containers from under products. On the bottom of the container we glue the metal puck to the super-glue, and to the wall it is secure a rack with a magnetic strip. In such transparent containers, it is convenient to store any easy little trifle.

7. Storage of blades from tape saws

Using hooks and stationery clips-clips, it is convenient to store the canvas for ribbon saws.

8. Storage of clamps

For clamps, a simple box of a rectangular plywood box is very suitable, which is attached to the wall. In the box put the handle of clamps.

Please note this post:

A good host always under hand will be a whole arsenal of instruments: from nails and screws to passatizes, levels and a set of screwdrivers, not to mention a drill, a perforator and a screwdriver. Very often there is no simple household repair due to the fact that the master can not find in the apartment or garage all the tools you need. That this does not happen, the entire working toolkit must be stored in a specially designated place - the toolbox.

What are the tools for toolboxes, what requirements they must answer, and how to make a box for tools with your own hands - about this article.

Varieties of toolboxes

In fact, the tool box is a box with a lid or without, divided into several different in size and shape of compartments. Small drawers are designed to store fasteners, drill, tips or other small parts can be broken in them. As a rule, such boxes are divided into several compartments, each of which has a separate lid. Such boxes are easily transferred, because they weigh a little.

More overall cases are necessary for storing and transporting a large tool, such as hammers, saws, drills or electrolovka. Completely huge boxes will be needed for the content of perforators, levels or chenos in them. Such toolboxes are often made on wheels so that they can be moved and transported.

Professional toolboxes may differ depending on the qualification of the wizard: so the plumbing needs one set of equipment, and the car mechanic is completely different. You can find such boxes in building supermarkets or in specialized stores, often they are sold complete with tools themselves.

Cases are divided into several categories. Not only their size is taken into account here, but also the design, as well as material manufacturing. Constructively, it can be:

• Open boxes with a handle for large tools and facilitate their transfer from one place to another.
• Multi-tiered boxes with a variety of small and large compartments for comprehensive storage of working parts and their lightweight transportation. Such a box can be thrown into the trunk of cars or move in the hands.
• Compact cases with ergonomic handle containing the entire tool required for small repair or a trip to the cottage.
• Cheats consisting of multiple drawing compartments are usually used inpatient at work.
• Belts with tools are needed to those who work at height or in hard-to-reach places.
• Trolleys - peculiar boxes for tools on wheels, characterized by large sizes. On such devices, very overall equipment, such as welding machines, drills are moved.

Important! When choosing a box for your tools, it is better to give preference to multifunctional boxes, where each part is assigned to your place, and small compartments are closed with covers. Otherwise, all tools risk mixed in one pile during transportation.

What makes toolboxes make

Cases and boxes can be performed from various materials, but the main requirement to them is one - boxes should be light, since the tools themselves weigh quite a lot. There are some more nuances that you need to know those who buys a case for their tool arsenal:

• The bottom of the box should be as thick as possible, since all the content of the content presses it.
• The full box when picked up should not be deformed - the walls remain perpendicular to the lid and the bottom. If the walls begged, it suggests that the case strength is insufficient for such a set of components.
• Well, if the box is fire-resistant, then the expensive toolkit will meet even during the fire.
• If the boxes are gaps, dust and characteristic of construction shoes will penetrate inside the box and pollute the tools. And in this case, the content threatens oxidation and rust due to increased humidity.
• Durability is an important factor, because it is worth a professional boxing quite a lot, and the load on it from metal components will be essential.

Today, the most popular materials for such boxes are considered:

Attention! All materials must comply with special standards, because if the box breaks at the most inopportune moment, all heavy tools will fall on their feet (or on the head) an unfortunate owner.

If a metallic tool box or wooden can still be made with their own hands, then plastic boxes really just buy.

How to make a tool box with your own hands

If the owner has decided to make a box for its inventory independently, first of all, it needs to decide on the size, and choose the boxing design.

To do this, it is necessary to inspect all your tools, measuring the most overall elements and taking into account the smallers (bolts, wrenches, washers, and so on). For these parameters, the size of the container itself and the internal compartments is calculated.

Construction of drawers for tools

Speaking about the design of boxes, they mean not their form, but the method of opening and the presence of additional sections. Standard are the following structures:

• Case - a portable box of a rectangular shape with a handle. As a rule, cases are divided into a variety of departments, have removable partitions that allow themselves to separate the space inside the box. The mass and dimensions of such cases are usually small.
• The container is a larger box for a variety of tools. As a rule, it has a trapezoid form with a rectangular bottom. Inside this box, there are also partitions, and there may be separate boxes of smaller size (folded by the type of matryoshki). The sections of such a container can be extended to the top and to the parties, forming a whole "troll" with tools and fasteners. Large drawers for tools of this type can be equipped with wheels, which is very convenient and practical.
• Multiboxes are located vertically and drawers in them are put forward on the guides, as in a conventional dresser.

With your own hands, it will be easiest to make a case for tools, because there are no complex mechanisms and hinges in this design, with which additional sections are leaving.

Important! Although the container with drawers folded in several floors is quite realistic to build with their own hands. To do this, each pair of "floors" should be made up with metal brackets, providing mobility elements (as in the figure below).

Improving the idea of \u200b\u200blife

If we talk about the material for self-making drawer, then, of course, the easiest way to work with the tree. For the first experience, it is better to choose inexpensive wood - for boxing it is quite suitable for a shuttle boards of coniferous rocks.

The whole process of making a drawer for tools consists of several stages:

1. Make up the drawing of the future boxing. To do this, use the usual Watman and a ruler or a professional program of type "AutoCAD".
2. The resulting drawing is transferred to wood with a simple pencil or marker.
3. Cut parts by contour using an electrolovka or saw.
4. Proceed with antiseptic agents or veneers to prevent its rotting and make "inedible" for insects and rodents.
5. The box is going. Now all the details must be combined into a single design, according to the drawing. To do this, it is best to use carpentry glue that is applied to the ends of the parts and press them to each other for a few seconds.
6. It is better to additionally fix the elements of the box with self-drawers, following the tree not cracked when screwing fasteners.
7. Install the cover using conventional loops or other fixture corresponding to the type of box opening.
8. The lid is equipped with a handle for transferring and transporting boxes with tools.
9. Inside the box are placed on the sectors, given the scheme and drawing. Extra partitions cut out from the board and fasten them into place with glue and screws.
10. The walls, bottom and lid of the drawer are grinding with several types of grinding paper, then stain or coated with several layers of varnish.

The box is ready to use, it remains only to fill all its compartments with appropriate tools and fasteners.

The easiest drawer for instruments

Joiner's newcomers are offered a simpler box of boxing for tools - a regular box with a handle, but without a lid. The advantage of such a box is that it is suitable for tools of various sizes, if desired, can be placed even a water level or a perforator, and you can make a miniature box for the "apartment" master.

It consists of such a box of just six parts:

• two long side elements;
• two short sides, the height of which should exceed the height of long sideways, as the handle will be attached here;
• the bottoms that should be made from a solid piece of wood, since it is precisely the bottom of the load from the weight of the tools;
• the handles whose role can play a bar, a plank or a circular section - the selection depends on the size of the box and the intended mass of its contents.

If desired, the design can be supplemented with internal partitions or complicate it with compartments with covers or doors.

All elements are collected in one design, fixed with joinery glue, then additionally fastened with self-draws. Special attention should be paid to the folding knob - it should be durable and reliable.

You can independently assemble the tool box not only from the boards, depending on the arsenal of the toolkit, the plywood, chipboard, OSB, galvanized metal or sheet aluminum can be used.

There is nothing complicated in the manufacture of such a box, and the advantages of the product are obvious: the tools and fasteners will be in a certain place, at any moment it is enough to get a box from a storage room or a garage and perform the necessary repairs.

A large and comfortable drawer under the tools - the dream of any wizard. It is clear, because in such a repository you can compact all your toolkit. They are not so expensive today, so one of the options is to purchase it in the store or create a similar masterpiece yourself. What option will be acceptable for you? Of course, the purchase has certain sizes, but the tools may be much more than it can fit into it. But one way or another, you will have to put up with it or run to the store again and buy a new one. It is quite another thing - to make himself: I picked up the necessary material and calculated under all the existing tools and even with the prospect. Conveniently? Most likely, you will agree with this argument. Therefore, let's talk in this article on how at home to make such a box.

What should he be?

If it is a home box, then it can be a regular box with a handle. Well, if you, for example, plumber, it is clear that you will need a box more functional, spacious and durable. This role will be successfully implemented by the Organizer. However, in this article, as an example, consider a simple home option - a box with a handle. So, we assume that we have decided on the type of box, where we will keep all the tools you need or almost everything.

Why start? To begin with, we will select the material. It can be plywood, wood or even metal, then make calculations. Only after that you can proceed to the preparation of a detailed drawing. This can be done in a classic way, that is, on Watman, with the help of a well-sharpened pencil, ruler, circulation, square, etc.

Non-classical way - with the help of a special computer program. "Autocad" and "Compass" just "sharpened" to make a professional accurate drawing. The advantage of such programs is that they will help to avoid errors in the calculation and, moreover, it is possible to see what you have from all this.

These programs will serve good service if you have certain skills to work with them.

The material was picked up, and now it remains to collect the entire tool that we will need. Of course, the types of tools are individually. It all depends on what box you want. They are too different. But, anyway, there are universal tools. They are always needed. This is the measuring instrument:

• fasteners;
• a hammer;
• screwdriver.

Getting to manufacture

We take the traditional material - a cutting board of coniferous rocks. As for processing, this is the easiest and most affordable material with good strength properties.

As idea, it will be a wooden box, and our task is now to materialize the drawing itself in the material. To do this, we need a ruler and pencil. After that, we carry out the markup on the material and the hacksaw or the electrolovka weeping the components of the product. If we planned the usual unlockable option, then we need to make five planes: four walls and bottoms.

When assembling, as a rule, it is better to use carpentry glue. The connection location must be cleaned, and only then apply glue, after which it is firmly compressed the parts between themselves. Be sure to give a completely dry glue.

After this operation, we can additionally strengthen the drawer fastener - self-tapping. Passed. Now you need to make a handle. It may be an ordinary wooden rail that we need to be knit or fasten to the upper faces of the side elements.

Organizer

Following the principle of "from simple to complex", let's talk about the organizer now. It is clear that in an open-top box, which was written above, you can put a large tool: manual hacksaw, hammer, and many more many more.

And where to give a small one? All sorts of screws, bolts, wrenches, etc. This small fastener has a leaning property or not to be at the moment when especially needed. Here we will need an organizer.

As already noted, this type of boxes in its design is the most functional in operation. What does he represent? It is a kind of like a box on the box, or rather, a lot of boxes in one section for storing not only medium-sized tools, but also all the little things. Of course, at first glance, it may seem to make such a design will not be easy. But it only seems. Basically, difficulties occur in the manufacture of a sliding mechanism. Everything else should be done much easier. Now in more detail about manufacturing technology.

1. We begin with the manufacture of the main building. It should be open and deep so that we can put in it a different tool of medium sized (hammers, wrenches, etc.). It can be said that the design of this main building is quite simple, and in essence it is a regular box, which can be divided into several sections with vertical planes.
2. The next stage is the manufacture of 4 beds smaller. You probably noticed that the number of these sections is even, and we mentally divide them in pairs, trying to adhere to the sizes of their lower big fellow. They will be installed on each other. One pair of boxes (upper) will be with lids. They will be either crowded on the piano loops, or by the type of Soviet school foam.
3. Now it remains to connect these boxes among themselves. This we will do with the help of connecting planes from the metal. We will need 6 pieces. With one, as well as on the other hand, we cling on one plate (short) to combine two lower boxes together - small and large. Two more plates (long) will connect all drawers among themselves. And finally, the longest bar will perform the role of the handle, and at the same time to connect the two upper floors of the organizer. As you can see, there is nothing complicated here, and the sliding mechanism is simplified, as it is presented on the example of a metal organiser - the principle is the same.

Making Metal Case under Tools

Let's talk now about the metal case of homemade manufacture. Do not immediately conclusion that it is impossible. Of course, it is possible to independently make a metal organiser for only experienced locksmother and in the presence of special tools and the corresponding material. Factory metal boxes are usually made of light metal species, such as aluminum, so that in itself such a box is not heavy. At home, working with aluminum is difficult.

In principle, the metal box for is loudly said. Metal will be made, rather, a regular box. Material that will be needed for the manufacture of such a box - the usual soft galvanized (thickness of about 0.3 mm). From the tools we need:

• corolnic;
• caliper (markup);
• sharpened little core or marker;
• line;
• a hammer;
• anvil (wide metal bar);
• file;
• passatia.

Further, all on the same scenario: drawing, markup. The most interesting thing is that all this can be done right on the galvanized sheet with a sharp core (or marker), as you like. We then mark the places that we have to delete the marker on the metal.

After that, we proceed to trimming using the metal scissors.

After trimming, we have such a complex geometric figure ("Winged Rectangle").

Now we will work a little for the blacksmiths. For this case, we have an anvil, and knocking the hammer, we will turn the rap of our workpiece. It is better to do this not chaotic, but in a certain order.

First, bend one sidewall, and then bend the other.

Now the sidewalls are in turn.

After that, we will deal with the bending of sticking petals. They will make the stringent design itself, and it will not "play".

Passatii can use to wrap sticking parts on the top of the box.

After such manipulations, it is necessary to walk with a hammer through the whole product, denying it.

In this case, it turned out a small box. But after all, this principle can be made similar - more, and in the end it will turn out such a metal box for the instrument.

So, if desired, everything is possible.

We hope that this article will be useful for you, dear readers. If in your instruments, then add it to the manufacture of a conventional toolbox. If your tools do not have a permanent "place of residence", then think about building a two-storey "house-transformer" for him. Try to do it, and your tool will always be in place, and you yourself will be pleased to use the product in your farm yourself.

Video

In this video, it is shown how you can make a box for tools and from girlfriend:

See how you can make caisis-organizers for the tool: