Electric Activators DE-10, DE-25. Electric DE10 distillates, DE25 are designed to produce distilled water that meets the requirements of the current State Pharmacopoeia of the Russian Federation, by heat distillation of water that meets the requirements of SanPiN 2.1.4.1074-01. Products are used in medical facilities, as well as for cleaning drinking water from radionuclides in emergency situations and using distillate in drinking purposes after its mineralization in other institutions. The product is made for climatic execution UHL 4.2 according to GOST 15150 during operation resistant to temperature from plus 10 to plus 35 ° C and the relative humidity of the surround air 80% at a temperature of 25 ° C.

Technical characteristics of DE-10 distillers, DE-25:

Electric distillers (aquadistillators) AE-5, AE-15, AE-25 bench-top.

Aquadistillers AE from the manufacturer of different performance to obtain high-quality distilled water (corresponded to GOST 6709-72 water distilled medical, domestic and technical purposes. Distillers are equipped with automatic, device to improve the quality of distillate, collapsible capacitor, allowing to extend the service life of the equipment and get the quality of distilled water by double Above the indicators of the GOST (specific electrical conductivity at +20 ° C with no more than 3.8 μm / cm).

• Heat shielding outer shell (casing).
• Low specific electricity consumption for obtaining 1 l of distilled water.
• Low cooling water flow rate for obtaining 1 l of distilled water.
• The electrical conductivity of distilled water is less! GOST 6709-72 "Distilled water" is 2.0-2.2 μm / cm (indicator according to GOST - 5 μS / cm).
• The quality of the water produced meets the requirements
  - GOST 6709-72 "Distilled water"
  - Articles FS 42-2620-97 "Water for injection".
• Included Supplies: Spare TEN, Water Supply Hoses and Distillate Collection, Connecting Clamps!
• External control unit!

Specifications of distillers AE-5, AE-10, AE-25:

Heating elements:
Electric heaters Tubular (Tane) 3.5 kW 220V (stainless steel).

Planned service life - 18 months.
Spare Tan is included!

The temperature of the resulting water: 70-85ºС.
To obtain water with a temperature of no more than 40º C, a distillate chiller requires.
The basic supply of AE-5 does not include. Purchased separately.

Execution: Desktop.
A bracket is required to fasten the aquadistillator on the wall.

Features:

• The housing and the main parts are made of high-alloyed mirror stainless steel 12x18N10T (AISI 321).
• The double shell and heat-shield cover provide moderately warm (not more than 45 ° C) the surface of the aimadiculator during its operation and protect the operating personnel from heat burns.
• Removable cooler for obtaining chilled distillate (the possibility of mounting the distillate cooler directly on the body of the asticistilistrator). The distillate cooler in the basic delivery kit is not included, is purchased separately ..
• Execution: Desktop (for mounting on the wall there is a separate bracket, is purchased separately).
• The package includes a spare TEN, water supply hoses and distillate collection, connecting clamps.

Safety system:

Electric distillers (aquadistillators) AE-4, AE-10 desktop.

AE-4. AE-10.

Features of the distillers AE-4, AE-10: Heat shielding outer shell (casing). Split contours of water supply Feeding the initial water to evaporate and supply the original water to cooling (not included in the base set, the modification is carried out at the request for a fee). Corps and main details Made from high-alloyed mirror stainless steel 12x18N10T (AISI 321). Low electricity consumption To obtain 1 l of distilled water. Small cooling water consumption 1 l distilled water. The conductor of distilled water is less !!GOST 6709-72 "Water distilled" and amounts to 1.8-2.0 μm / cm (indicator according to GOST - 5 μS / cm). The quality of the water produced meets the requirements: - GOST 6709-72 "Distilled water", - Articles FS.2.2.0019.15 "Water for injection", - EN ISO 3696: 1995 "Water for Laboratory Analysis" (type III water). Complete delivery: Spare TEN (for AE-4), liquid level sensor spare electrode, water supply hoses and distillate collection, connecting clamps! External control unit.

TECHNICAL SPECIFICATIONS OF DISTILLERS AE-4, AE-10:

Heating elements:
Tubular electric heater (TEN)
3.0 kW 220V (stainless steel) - 1 pc. (AE-4)
2.4 kW 220V (stainless steel) - 3 pcs. (AE-10)
Planned service life - 12 months.
Supply of equipment with copper TEN (for a fee)!
The temperature of the distillate obtained: 70-85 ºС.
To obtain a distillate with a temperature of no more than 40 ° C, a distillate chiller requires. In the basic delivery package is not included. Purchased separately.
Execution: Desktop.
A bracket is required to fasten the aquadistillator on the wall. In the basic delivery package is not included. Purchased separately.

Aquadistillator Medical Electric AE-4/8 (AE-5) with built-in watershed. AE-5 distiller It is intended for the production of distilled water from the original way of heating to boiling with further condensation of the resulting water vapor and the production of distillate with a temperature ranging from 40 to 85 ° C followed by its accumulation in the built-in tank-drive. in accordance with the requirements: GOST 6709-72 "Distilled water". Articles FS 42-2620-97 "Water for injection"!

Technical characteristics of AE-4/8 distillers:

Execution:

Design features:

• Represents two separate units - aquadistillator and water collectormounted on a frame with protective panels and combined into a single automatically operating system.
• Performance - stainless steel monoblock with adjustable support for desktop location and the possibility of mounting on the wall.
• If necessary, the design allows absolutely independently of each other to use aquadistiller (for the production of distillate) and waterball (for storing and selecting distillate outside the monoblock).
• Stainless Steel Protective PanelsProtecting exploiting personnel from heat burns and contacts with working equipment elements.
• Complete delivery: Spare TEN and a spare fluid level sensor electrode, water supply hoses and distillate drains, connecting clamps.
• Fully automatic control system:
  - maintain the amount of water going on evaporation,
  - Disable water supply and electricity when filling the water collector,
  - equipment outputs on the operating mode in the selection of distillate from the waterborne.
• Service life - at least 8 years. Warranty period - 14 months, working on failure - at least 3 500 hours.

Automatic security system:

• Disconnecting the supply of electricity when the centralized water supply stops and decreases the water level in the evaporation chamber below the permissible one.
• Solenoid valve shutdown water supply to protect against overflow.

Aquadistiller Medical Electric AE-10/20 (AE-15) with built-in water collector. Stable high quality distillate produced - 1.5-1.8 μS / cm According to the requirements of GOST 6709-72 "Water distilled". Articles FS 42-2620-97 "Water for injection"! The design allows, if necessary, absolutely independently of each other to use an aquadistiller (for the production of distillate) and a waterborg (for storing and selecting distillates outside the monoblock). Fully automatic system and security system. Complete delivery: The spare electrode of the fluid level sensor, water supply hoses and distillate drain, connecting clamps!

Technical characteristics of AE-10/20 distillers:

Execution:
monoblock from stainless. Steel with adjustable supports for desktop location and the possibility of mounting on the wall.

The temperature of the resulting water: 70-85 ° C.
To obtain water with a temperature of not more than 400 ° C, a distillate chiller requires.
(The base set of supply AE-15 does not include. Purchased separately).

Heating elements:
Tubular electric heater (TEN) 2.4 kW 220V (stainless steel) - 3 pcs.
Supply of equipment with copper tan (for a fee)!

Medical electric BE-2 bidistillator. BE-2 bidistiller is designed For the production of distilled and bidistillated water from its original by heating to a boil with further condensation of the resulting water vapor and receipt: distillate - with temperature in the range from + 70 ° to + 85 ° C; bidistillates - with a temperature of no more than + 40 ° C. The quality of the water produced meets the requirements of GOST 6709-72 Distilled Water Articles FS 42-2620-97 GF Xi Edition "Water for Injection". Electrical conductivity: bidistilled water: 1.0-1.2 μS / cm; distilled water: 2.0-3.0 μs / cm.

Technical characteristics of electric BE-2 bidistillator:

Design features:

• Production of both distilled and bidistillated water.
• The possibility of adding reagents to the chamber of evaporation of the 2nd distillation to implement the secondary distillation of the distillate in their presence.
• The housing and the main parts are made of stainless steel AISI 321 / AISI 304.
• Execution - stainless steel monoblock with adjustable support for desktop location and the possibility of mounting on the wall.
• Stainless steel protective panels that protect the operating staff from thermal burns and contacts with working equipment elements.
• Collapsible condensation chambers for visual control over the formation of scale, simple cleaning against deposits, convenience of maintenance and repair.
• Built-in cooler for obtaining bidistilletes with a temperature of not more than 30 ° C.
• Included supply: Spare TEN, a spare electrode of a fluid level sensor, water supply hoses and distillate drains, connecting clamps.
• Service life - at least 5 years.

Electric Medical ADE-40 Activators, ADE-50 floor.

Technical characteristics of ADE-40 distillers, ADE-50:

Lifecycle: at least 8 years.

Features:

• The housing and the main parts are made of high-alloyed mirror stainless steel 12x18N10T (AISI 321).
• Quick-release condensation chamber design over evaporation chamber for visual control over the formation of scale, simple cleaning from deposits, maintenance and repair.
• Automatic water level control in evaporation chamber.
• The ability to combine with the collection to store purified water into a single automatically operating system.
• Execution: Outdoor.
• The possibility of production of both hot (+ 80ºС) and chilled (no more than + 40ºС) water. The distillate cooler is purchased separately.

Safety system:

• Automatic shutdown of the TEN with a decrease in water in the evaporation chamber below the permissible one.
• Automatic maintaining the amount of water going on evaporation.
• Automatic shutdown of the aquadistillator (TANDOV) when filling the waterborne.

Activadists Medical Electric ADEs are high-quality and reliable equipment with consistently high quality distillate obtained with the convenience of operation and minimum service costs!

The electrical conductivity of distilled water is less than GOST 6709-72 "Water distilled" and is 3.5 μS / cm (indicator according to GOST - 5 μS / cm). The quality of water produced meets the requirements of GOST 6709-72 "Water distilled" Articles of FS 42-2619-97 "Water purified".

• Low specific electricity consumption for production 1 liter of distilled water.
• Low water flow rate for cooling for production 1l distilled water.
• The system for cleaning the evaporation chamber (from salts and scale formed when boiling) during operation.

Technical characteristics of DE40 distillers, DE50, DE70, DE100, DE140:

		DE-210.
	DE-210.
Performance, l / hour
Voltage, in:
Power consumption, kW
Water consumption for cooling, l / hour
Overall dimensions (DHSHV), mm
Mass, kg:
Overall dimensions in packaging (DHSHV), mm	1260x860x1190, 940x890x1040, 960x700x510.
Packing mass (wooden box, 3 pcs.), Kg
Execution	outdoor

Heating elements: Electrodes (stainless steel).
The planned service life is 18 months.
The spare set of electrodes is included in the package!

The temperature of the resulting water: 70-85ºС.

Features:

• The housing and the main parts are made of high-alloyed mirror stainless steel 12x18N10T (AISI 321).
• Reliability of work in the formation of scale on the heating elements (electrodes): electrodes do not burn out, as brazen beam in the formation of scale.
• The collapsible design of the condensation chamber for visual control over the formation of scale, simple cleaning from deposits, convenience of maintenance and repair.
• Pipe capacitor.
• The possibility of using for cooling the distillate chilled purified water from the technological system of a closed water turnover (if present in the enterprise).
• Automatic water level control in evaporation chamber.
• Devices for cleansing steam from droplets of non-distilled water.
• The ability to combine with the collection to store purified water into a single automatically operating system.

Safety system:

• Automatic shutdown of the TEN with a decrease in water in the evaporation chamber below the permissible one.
• Automatic maintaining the amount of water going on evaporation.
• Automatic shutdown of an aquadistillator (electrodes) when filling the waterborne.

Installations of obtaining water of analytical quality UPVA-5, UPVA-15, UPPA-25.
Analogs of bidistillers.

Installations UPA are an analogue of the bidistiller and are intended to obtain "water for laboratory analysis" (especially clean water with a very low content of inorganic, organic or colloidal impurities) according to GOST R 52501-2005. At +25 o with the electrical conductivity of the resulting water 0.8 - 1 μS / cm. The distilled water of increased purification is used to power some types of laboratory equipment (hydrogen generators, climatic chambers, autoclaves, etc.), preparation of the nutrient medium in microbiology, preparation of high-quality buffers, solutions of chemical and biochemical reagents, for sensitive analytical methods, including atomic absorption methods Spectrometry (AAS) and determination of components in trace quantities.

The quality of the water produced complies with the requirements of type II - GOST 52501 "Water for laboratory analysis" (Articles of FS 42-2620-97 "Water for injection").
Registration certificate for medical devices No. FSW 2010/07650 dated 05/17/2010, issued by the Federal Health and Social Development Service and Social Development of the Russian Federation.

Advantages in comparison with the bidistiller:

• Energy saving - rational electricity consumption (2 times less).
• Economically consumes drinking water (2 times less).
• Above the quality of the resulting water (distillate): 0.8-1.0 μS / cm.

Specifications of distillers of UPA 5, UPPA 15, UPP 25:

Heating elements:
Tubular electric heaters (Tane) 3.5 kW 220 V (stainless steel).
Planned service life - 18 months
Pressure of the original water: from 0.2 to 0.4 MPa (from 2 to 4 kg / cm²).

The temperature of the resulting water: 40ºС.
(It is possible to obtain water with a temperature of 70-85ºС).

The use of water produced by the UPA (water type II):

1. for sensitive laboratory analysis methods, including atomic absorption spectrometry (AAC) method and determination of components in trace quantities;
2. for the preparation of the nutrient medium in microbiology;
3. for the preparation of high-quality buffers and solutions of chemical and biochemical reagents;
4. to power some types of laboratory equipment (hydrogen generators, climatic chambers, autoclaves);
5. for further purification of water to a supercure state;
6. for the preparation of particularly clean injection and physiological solutions and pharmaceutical preparations.

Features:

• Multistage cleaning system.
• The housing and the main parts are made of high-alloyed mirror stainless steel 12x18N10T (AISI 321).
• Automatic water level control in evaporation chamber.
• Built-in cooler to obtain a distillate with a temperature of not more than 40 ° C.
• The ability to combine with the collection to store purified water into a single automatically operating system.

Safety system:

• Automatic maintaining the amount of water going on evaporation.
• Automatic shutdown of OKVA-5 (TAND) when filling the waterborne.

Installation of obtaining water of analytical quality UPVA-5-1. Designed for production in laboratory conditions over clean (deionized) water of analytical quality (Type I and Type II) . The quality of the water produced meets the requirements: GOST R 52501-2005 "Water for laboratory analysis" (water type I and type II) articles FS 42-2620-97 GF Xi Edition "Water for injection". Electrical conductivity of purified water: Water i-th type - 0.05 μm / cm (at 20 ° C). Water II type - 0.8-1.0 μS / cm (at 25 ° C).

Technical characteristics of distillers UPV5-1:

The use of water produced by the UPBA-5-1 (type I water):

1. for highly sensitive methods of laboratory analysis, including highly efficient liquid chromatography, atomic absorption spectrometry (AAS) and determination of components in trace amounts;
2. when solving problems for the definition of organic carbon;
3. for the preparation of culture media;
4. in microelectronics.

Features:

• Works directly from tap water.
• Water quality control in real time.
• The possibility of obtaining water II type.
• Recycling of the resulting water.
• The housing and the main parts are made of high-alloyed mirror stainless steel 12x18N10T (AISI 321).
• Electrodeionization (continuous separalization of water based on ion exchange resins without the use of chemical reagents, and therefore, no chemically resistant equipment for the regeneration system of resins and redundant backup equipment for the period of regeneration).
• Execution: Desktop (stainless steel monoblock).

Safety system:

• Automatic shutdown of TEN with a decrease in the water level in the evaporation chamber below the permissible one.
• Automatic maintaining the amount of water going on evaporation (recycling).

Technical characteristics of Aquadistillers PHS Aqua:

Aquadistillator DE-60. DE 60 distiller is used in medical institutions, pharmacies, laboratories; In any production, where it is necessary to use the water of the specified cleaner. Features: Prost and easy to operate. Safety for the environment. The housing and the main parts are made of high-alloy stainless steel 12x18N10T (AISI 321). Built-in electrical block. Quick-release condensation chamber design over evaporation chamber for more free access and maintenance and repair. Electronic water level sensor in evaporation chamber. Removable refrigerator for chilled water. Devices for cleansing steam from droplets of non-distilled water. Gas production system when cleaning steam. One connection point to the drainage line. Continuous work time - no more than 8 hours. The service life is at least 5 years.

Technical characteristics of Aquadistillators DE-60:

Safety system:

• Automatic shutdown of the Tan with the termination of the centralized water supply.
• Automatic shutdown of the Tan with a decrease in water in the evaporation chamber below the permissible one.
• Automatic maintaining the amount of water going on evaporation.
• Automatic shutdown of the aquadistillator when filling the waterborg.

C-240.

S-300


Overall dimensions, weight, water collectors capacity:

Model	Capacity, L.	Dimensions, MM.	Weight, kg	dimensions in packing, mm	Packing mass kg
S-30	30	450x500x485	6,6	490x475x565	9
C-60	60	450x500x785.	8,1	470x470x850.	12
S-100	100	560x580x725	13,5	600x630x810	32
C-180.	180	690x660x890.	20	720x710x1020.	43
C-240.	240	690x660x1120	24	755x715x1385	47
S-300	300	805x780x1035	31	890x850x1190.	61
C-500	500	805x780x1440.	48	890x850x1610	73

Water collectors are designed for accumulation, parsing and storage of purified water.

Features:

• The main parts of the waters are made of high-quality stainless steel brand 12x18N10T (AISI 321).
• Water collectors are conveniently combined with distillers for collecting distilled water.
• Water collectors are equipped:

Device for turning off the aquadistillator when filling the tank;
- air bactericidal filter;
- waterproof column;
- Crane for water analysis.

Water collectors were assigned an OKP code 94 5250, according to which the products relate to the list of the most important and vital medical equipment, the implementation of which on the territory of the Russian Federation is not subject to the taxation of VAT.

For the production of distilled water with a high level of cleaning with heat transfer method, a special device is used, or a distiller. The Activadian DE produces highly purified water by distillation (distillation), which is the simplest and effective method of cleaning. The quality of distilled water is regulated by the requirements of the current statefarmakopeia and San.pin2.1.4.559-96.

In the domestic market today, the inquiries of various models manufactured by the St. Petersburg Enterprise "Electrometting Plant" are most in demand - as devices that produce fully appropriate for current standards and requirements. Aquadilationals of DE this manufacturer presents the company "Healthcare".

Model range of EMO Aquadistillars (Performance Graduation):

• The DE-4M model is an aimadetile with a capacity of 4 liters of distilled water per hour
• Model DE-10M - 10 l of distilled water per hour
• DE-25M model - 25 l of distilled water per hour

Electric Medical Activatilator from Healthcare Company

DE-4M 30900 rub.	DE-10M 37700 rub.	DE-25m. 49500 rub.

The convenience of the aquadistillators of all models of the DE series is that the devices produce both cold distilled water and heated to T + 80ºС.

In the case, if the water located in the evaporator drops below the critical level point, the aquadistillators of all modifications have a automatically triggering system of a shutdown warning overheating.

The main operating parameters of the climatic performance of the aquadistillators (UHL 4.2): external t ≤ + 35ºС, moisture ≤ 80% (with an indicator T + 25ºС).

Electric DE-25M distillers, DE-10M and DE-4M are equipped with a full package of mandatory certification documents required for medical equipment. Registered in the State Register of Medical Development of the Russian Federation.

To buy a medical electric distiller DE means to solve a problem with distilled water for a long time, as this equipment "Emo" plant (St. Petersburg) is famous for reliability and a significant service life.

In the range of supplies of the company also have spare tanes (electric heaters) for the aquadistillers produced on the line of the well-known company Kanthal (Sweden). Electric heaters are enclosed in the shell, the role of which is performed by a stainless steel pipe.

Activadilers DE-4M, DE-10M, DE-25M (SPB) | Scope of application

• State and commercial medical institutions (institutions) of different profiles
• Pharmaceuticals, including in the manufacture of medicines directly in pharmacies
• Industrial and scientific orientation laboratories in which distilled water is used

Electric Aquadistillator DE "Factory" Emo "| Working advantages

• Produces distillate both cold and heated to + 80ºС
• Thanks to auto power, exclude the overheating of the device
• Application as a material for the manufacture of basic stainless steel nodes increases reliability
• Teni, assembled in a stainless pipe shell at the Kanthal production line (Sweden), have a high level of quality and reliability
• Produced in climatic versions, corresponds to the profile of GOST 15150
• Cleans the water infected with radionucleizaids with high coefficient
• It turns on the main operating mode in 30 minutes
• It serves up to 7 years, has a warranty for a period of 18 months

Medical DE-4M Distiller, DE-10M, DE-25M | Specifications

Name	Parameter
Aquadistillator model	DE-4M	DE-10M	DE-25m.
Performance, l / h
AC power supply, W / Hz
Number of variable current phases
Power consumption, kva
Water consumption for cooling and nutrition, no more, dm³ / h
Specific flow rate for 1 dm³ obtained, dm³
Working mode time, min
The coefficient of cleaning from radionuclides, not less
Overall dimensions of an aquadistillator, mm
Overall dimensions of electrical wheel, mm
Aimadistillator mass, kg
Mass of the distillator with packaging, kg
DEF distiller (emo, spb), price, rub.	30900	37700	49500
Spare tans for emo distillers, rub.	1750