He thought about foil more than 10 years ago, but carried out only now. There were experiments, samples, in general, everything was going on, and not only, and finally found a way out for himself. Articles about foil, and more precisely, as it is planted very little, and really, no one tells anything, the glue that is all used (Metal Foil Adhesive), I tried it, good, but it is to attach a ready-made model, and selling a decree. May of course not so, but I didn't quite like this way, the more it is almost impossible to make an external riveting with him. In general, In this article, I will scatter two options, one of them is built on this site, the second has not yet designed here, but also start, it is a model with an external riveting and a model with an inner riveting.

I immediately apologize, the foil samples I lost, but the foil is used for bath, the thickness of them is different, in my case the foil thickness is about as a foil from the covers of Neskafa coffee and the cans of a dry mixture of NAN, I will try to find and report. In Yekaterinburg, I found one place where they traded her. The foil, which is thinner, is no longer mild, but as a can tin, it needs to be flashed, it is too much time, and we don't need it thicker. It is for sale in 10 meter rolls width 1 meter. Price 1500r, you will be enough for all models. In principle, if we take foil thinner, such as baked, then it turns out the foil self-kept as a shop in rolls. She will not work either too.
So, go on.

Next glue! I used different, the moment (the dissolved solvent, by the way, as an option, but the way out of the lungs), the American special for the foil, such as pure PVA, tried 3m spray (for it you need a thick foil and subsequent grinding). In general, recognize stores selling advertising products, or order via the Internet, such a thing. Two-sided glue tape 3m ™ 467mp, its size is 600 * 900, there is more, but we sell it. The thickness of the adhesive layer is 0.05 mm. Price in EKB 360r. Foil preparation looks like

So we take foil, roll over it on a flat surface, the type of glass, roll over the rhael, or any plastic spatula. Degrease. Looking at the photo, we tear one side of the double-sided tape and glue to foil, smoothed the rocket, then carefully roll out the rest along the foil, if it is not clear, see how advertisers ride the film, the same thing! I make pieces of about 300 per 300.
Next, we will analyze the option with the outer riveting.

I will take the basis of work on my model Harricsein, here is the link
So, I backed up the drawings, then put the model, and figured out what and how, where it is necessary to add, and where to get down, because The model does not completely fall into the drawings. We laminitate the drawing, take the file and put the drawing into it, take the adhesion and fix the drawing inside so as not to move inside.

Next, we take the scotch, I use the scotch paper firms of the ASA, in the photo it will be, and we stick to the panel that we need. The shape of the wing is symmetrical, there is nothing unnecessary to mirror (some separate elements of the mirror and print separately). You need to mirror in order to glue on the back of the foil.

Next, with the help of a ruler and marker, or a pencil applied a riveting.

Out and transfer to the opposite side of the foil ...

Next to the move goes Revitter. Previously, I used the gear, then I ordered the revisor of the company Trupeter, all this is not that. I bought this thing, and the thing was just cool! The gear is not so easy to find, in the workshops they look at you like on an abnormal one, or they say that the gears are not sold, in short, I took and ordered this device, without having experience shopping in an Internet shop, everything turned out quickly, and quickly everything came in 9 days. In the photo it is at the top.

So, we roll the riveting and cut the panel on the contour ...

Next, we take toothpick, somewhat rounded it and smoothed the panel, it turns out such a thing ...

And in such a way, you get a completely panel. By the way, the process, not to say that labor-intensive, in 12 minutes 50 seconds, such a result ...

Next inner riveting! As a cat, the model R-47 from Hacegawa is 32 scale.
All the same, just glue on the front side, ripping exactly in place, before applied, for what: firstly, simply apply everything on a flat surface, secondly, when applying the inner riveting, a furrow will form, because of which the panel will be poorly glued But after the rolling, everything will be ok, and cool clams will be obtained, if you don't roll a foil! The main thing is to match the drawing so that the riveting coincides on the panels after the glue. Well, in general, something like this.



I think I explained clearly, but if that, write, I am pleased to answer ...

The original nail design is now available at home. This requires a fantasy and a little special foil for nails. A flickering manicure that will play with all the colors of the rainbow will become an excellent addition to your party image. Creating a Neil-Design will not take much time, but will please you with its beauty and simple execution. How to glue foil to nails with glue and without glue you can find out right now, as well as a few more secrets for a stunning manicure.

Glue to nails foil (click to enlarge)

What is the foil for nails and its types

The usual food foil is not suitable for manicure, it has another structure and is not intended for this. Special foil material for nyl-design has a glossy side with or without pattern. When joining glue for foil or varnish, the drawing remains on the nails, and the film is cleaned.

Types of foil:

• transferable;
• sheet not transferable;
• embossed;
• compressed in jars;
• minx;
• strips.

Types of foil on nails (click to enlarge)

The choice of material depends on your skill and manicure preferences.

The translated foil is leafs with a pattern or embossed that you need to press for some time to the nail, pre-coated with varnish or special nail glue, and then remove the film and coat with a transparent nail polish.

Sheet foil is perfect for the molding effect. It must be cut in any preferred form and glue the foil to the nails using or gel with a sticky layer.

Foil sticker process (click to enlarge)

The embossed material is suitable for the original manicure execution, since the foil is structured and provides ready-made patterns on the nails in the form of lace, curls, etc.

The foil from jars is the most popular version in design, has a little distinguished look. Most often used to create aquarium manicure. This material is glued on the sticky gel layer, which will provide an additional shine and a long sock. An ordinary varnish will not bring the desired effect.

MINX is a new kind that is very popular with many masters, a hairdryer and stickers are required for execution. They are glued under the influence of warm air.

Strips are a foil on a sticky basis, which costs cheaply and has a big length. This material is presented in different colors. Sometimes such strips allow you to make a perfectly smooth striped manicure with clear boundaries, it is easy to glue to the nail and is also easily removed without traces.

Methods of application

For a spectacular manicure, you need to know how to use the nail foil. Consider a few simple ways.

Check the video to learn more:

Option with gel varnish and transferable or not transferred foil:

• first, it is necessary to prepare a nail plate, giving it the right shape and removing the cuticle;
• then apply the database and dry in the ultraviolet lamp;
• apply 1-2 layers of colored varnish while drying in the lamp. For transfer foil, use a sticky layer lacquer. After drying 2 layers, it is not necessary to remove it;
• carefully apply the carved foil element and smooth down with a cotton stick or a special applicator, trying not to damage the coating;
• if you used the translated foil, then the film needs to be removed and covered with a manicure top.

Translation design can be performed with ordinary varnish. This method is applicable to a hot film, which is glued on the color gel.

The second way with ready-made MINX stickers:

• this option is rapid and easy to use, the stickers with the effect of gold, silver or lace look perfectly. True, such a Neil-art has a short sentence of socks, despite the application of manufacturers. Detect stickers from nails start 3-4 days;
• on the prepared plate, it is necessary to smoothly attach the sticker with the image. Some masters are recommended to apply a matte lacquer in advance or glue the surface for better clutch;
• heat stickers with warm air, such as hair dryer. So they will get soft, glue for foil melts and firmly connect a sticker with a nail;
• excess the films should be cut, and the ends slightly cut;
• after the cooling, we apply a transparent varnish, paying special attention to the end.

Learn more subtleties from the video:

How to use strips:

• cover the nail to any varnish and completely dry it;
• cut the strip into a few small nail in size;
• apply the material to the nail plastic and stroke with an orange stick or an applicator;
• excess strips cut off and consolidate the design with a transparent varnish.

Methods of execution of manicure are very much, the design depends only on the fantasy and the capabilities of the master.

Nail casting effect

For a manicure with such an effect, glue for foil or gel for extension is needed. But be prepared that it is not necessary to achieve the perfect result from the first time, in everything you need practice.

Method with glue:

• apply the desired drawing to the pre-prepared nails and wait a few seconds, it should become transparent;
• it is possible to determine which side of the foil to the nail box can be a simple experiment - it is enough to scratch the material. Which side will remain tracks, the side and need to work;
• attach the film to the nail plate, pick up a finger and remove sharply. If the picture remains where the pigment was not imprinted, the procedure can be repeated;
• from above apply fixing varnish in 1-2 layers.

You can use a special lacc gel (click to enlarge)

We glue foil on gel for extension:

• in this case, you need to apply a gel pattern for increasing with a sticky layer. It must be dried in the lamp to 2-3 minutes, depending on the manufacturer;
• press your finger a film with a pattern on the gel lacquer, hold a few seconds and remove with a sharp movement, as in the adhesive version;
• cove the design with two layers of a transparent gel.

Secrets of a good manicure

First and chief advice - do not forget to cover the nobs by fixing varnish for longer socks.

Transparent lacquer or gel will help avoid damage, scratches, and also give an extra shine to the manicure.

If the foil stuck unevenly, it is possible to get rid of it, removing the lacquer removal. But to remove the shellaca, a special liquid or apparatus will be required. Remove the gel manicure is independently quite difficult, but maybe.

Use only high-quality materials, otherwise the drawing can be blurred. Often, the gel varnish is to blame in a bad result, which can start bubble and straighten the film.

Supplement design with foil can be applied with drawing, ornament or glue rhinestones.

So the manicure will not become vulgar and overloaded, and there will be some kind of "cherry on the cake" that will complement your image.

Manicure, made using foil, is able not only to perfectly decorate your handles, but also to attract attention to those surrounding people. In addition, it is easy to perform at home. It is enough to purchase the material and find out how to properly translate foil. Options for designing nail foil set from lace, gentle flower patterns and geometric patterns.

September 19, 2016
Specialization: Master in the construction of plasterboard structures, finishing work and laying flooring. Installation of door and window blocks, finishing of facades, installation of electricians, plumbing and heating - for all types of work I can give detailed consultation.

If you have faced a problem with the protection of the room from the summer heat and you need to solve it with minimal costs, the foil can be an excellent solution, and it can be used different options. I will talk about what can be found on sale today and how to carry out work to protect yourself and not to spoil the window.

Major products and their features

Foil for windows from the Sun can be different, I will tell you about those options that are most common. We will figure it out how to fix them better, in which the pros and cons of this or that decision and in what situations it is better to use a specific type of product.

Option 1 - ordinary foil

This solution has several undoubted advantages:

Democratic price	In what, and in value this option does not have equal, the baking foil has an affordable price. If you need to solve the problem with the heat with minimal cost, then it is better not to find this way
Availability	You can buy material in both household and food stores in which there is a small section with useful for the owners of small things. Roughly speaking, you can go beyond the bread and buy all the required sunscreen
Efficiency	The foil surface very well reflects the sun's rays, thereby allowing to significantly reduce the temperature indoors without the use of special equipment
Easy use	For work, you do not need a special tool and fixtures, the mount is performed quite quickly and very simple, below we will analyze this process in detail.

Naturally, this option has its own minuses:

• The most important disadvantage is that the aluminum foil is opaque, so if you flush the windows completely, it will be dark in the room. Alternatively, you can close the window opening only partially, it will reduce efficiency, but will provide a room at least natural light;
• Another minus is not a very attractive appearance. Of course, if you need to quickly solve the problem, and the kind is notable, you can not pay attention to this aspect, but still many people want the window to look more or less adequate;

• If you do not know how to glue foil on the window and listen to the tips of pseudomaster, it is very easy to spoil the surface. Incorrect fastening makes the process of removing foil very long and tedious, you have to sit at the window for more than one hour.

We will deal with how the installation is carried out. I previously read the information on this issue on the Internet and know what I found? That the request "how to remove foil from the window" is far more often the question of how to glue it.

The fact is that many fasten foil as toning - they apply a soap solution on the glass, put the material and drive moisture from under it. As a result, when you need to remove protection, it is found that the foil is taken off with small pieces and other exit except to nourish over the window with the blade or construction knife simply not.

I will talk about a simpler way, it may be less attractive, but it takes a little time, and it will not be difficult to remove the foil.

Before glueing the material on the glass, you need to stock all necessary, the list is very simple:

• Foil in the required quantity to determine how much it is necessary, measure the area of \u200b\u200bthe glass, then you can navigate on the spot on the basis of the width and length of rolls;
• Scotch - the most common option will fit, but you can use both narrow, work will be a little more difficult with him, but the removal will be much easier;
• Scissors are needed for cutting materials when working.

Work is done like this:

• Initially, the window is rubbed so that there are no dust on the glass and the frame, which will allow scotch to glue much more reliable;
• Next need to be measured to determine which pieces foil will be cut. To work, it is better to adjust either the table of large size, or free the area on the floor, since the material is very fragile and it can be easily damaged;
• The sliced \u200b\u200bpiece of foil is placed on the surface, after which it is necessary to glue a piece of tape to the upper side so that it is half visible to the material;
• Next, the element is fixed on the window, it is better to glue it to the framebut you can and right on the glass, everything depends on the situation;

Foil strips are better to glue each other on the window, and not on the floor or, so it will be much easier.

• And do not forget that the material is opaque, so before you take some sections, you need to decide which part of the design you will leave open. Try to choose the plot to which the least of the whole sun shines.

A small advice on deletion - after dugouting the scotch, traces can remain, tie out which is easiest to determine the composition for windows.

Option 2 - Curtain film for windows

This is a more reliable type of product, which is specifically designed for use in window structures. Sunscreen curtains has a number of important advantages:

• Strength - this material is much more reliable than fragile foil, so it is easier to work with it, you will not be afraid to damage the surface with one careless movement;

• Comfortable dimensions - products are sold in rolls with a width of 60-100 cm and a length of 3 m, such a configuration is well suited for window structures;
• Democratic cost - one roll will cost you only 100 rubles, and this is better when it is better than a simple foil;
• Attractiveness - if you take installation in accordance with all the recommendations, your windows will look very carefully and even presentable;
• Transparency - film reflects the light outside, but inside almost does not limit the review, only slightly darkens the glass. Thanks to this, you can safely close the entire area and provide the most efficient protection from the summer sun.

• There are two product options, each of which has its advantages. One option is glued on the glass, and the second is used as a curtain, everyone has its advantages, and choose a specific solution to you.

Do not buy the products of Agrocheoztorg, as this is the most unreliable option from the market. On the package it is written "Beware of fakes", but the original does not differ in quality - there are cases when the material came into disrepair the day after gluing, and it was almost impossible to pull it away.

Now we will deal with how to spend your own hands, I will begin consideration with a simpler version, which is called "Curtains sunscreen" and can have different sizes. The workflow with this type of products is extremely simple:

• Before sticking the chart, it is necessary to wipe the upper part of the frame, the material will attach much better on the clean surface;
• Next, you need to deploy the canvas, make sure that it is suitable, after which it is necessary to remove the protective film with the upper adhesive strip and tightly press it to the frame, on this installation is completed.

The film skips light and can if necessary, push the curtain, which is very convenient.

Now we will deal with an option that glued on the glass, the instructions for working more complex:

• To begin, we need to wash the window very well if there are any sorts or stains on it, then the film will only emphasize them and spoil the entire appearance of the window opening. For washing, use any means, the main thing is that the surface is clean;
• Themes are then performed in order to determine the size of our glazed sections. After that, it is necessary to cut the material, but not exactly according to the parameters, and with a margin of 5 mm in all directions, this will eliminate the marriage when the crack remains around the perimeter, and it will simplify you work, because light dies are easily compensated by the material incentable;
• The surface should be rich in the soapy solution, it will avoid immediately gluing the film to the glass and help adjust its position. To work the easiest way to use a spray gun in order not to fill the entire window design;

• A protective layer is also removed from the reflective material and the same soap solution is applied to the surface. You should not have questions to which side of glue material - the reflective surface always looks outward, it is precisely it should be very abundant;
• The prepared element is neatly located on the glass, thanks to the soap solution, the film moves well on the base, and you need to align it in an optimal position. On the surface there should be no big folds;

• Moisture from under the film is traveled either by an ordinary cloth or with the help of a rubber spatula, if there is a hand. The work is made from the center to the edges, make sure that anywhere there is no moisture;
• Lastly, the blade is cut off excess material around the perimeter, after that you can enjoy the result of the work.

Aluminum is a metal, characterized by ease, strength and resistance to external environmental impact. This metal has its drawback - it does not have adhesion properties.

Therefore, it is necessary or welded, or glue. Since only professionals can perform welding, aluminum glue is an excellent household option. But for this metal, only special glue will fit.

Any glue, intended for aluminum, must contain in its composition of the pickens and acids that destroy its oxide film and increase adhesion, providing a solid connection.

• Mastix aluminum glue. With it, aluminum glued, seal the capacity and compounds, repaired colored and black metals, wood, ceramics and plastic in any combinations. Even at low temperatures, as well as in fatty and wet surfaces, quickly and reliably glues parts. This is a heat-resistant aluminum glue, so the product glued with it can be operated at very low and extremely high temperatures (from -60 to +150 degrees). The cost of tubes with a volume of 55 g: 33 rubles.

• Cold welding ASTROHIM ACE-9305. This is a reliable adhesive for instant repair, which can be useful in an emergency to eliminate breakage. Its use provides durable aluminum aluminum and its alloys, as well as the restoration of broken or lost fragments, including threads. Temperature range: from -60 to +150 degrees Celsius. Packaging cost: 82 rubles.

• Cosmopur 819. One-component polyurethane adhesive solution, with which you can fasten aluminum. It gives a viscous and elastic seam between the glued surfaces, is used to fill the gaps, gluing the corners of aluminum structures intended for doors and windows. Also designed to work with assembly and structural compounds. Solvents in its composition are not included. Packing cost of 310 ml: 456 rubles.

• Moment epoxy metal. Two-component glue, guaranteeing the bonding of aluminum, steel, copper, iron and many other metal products among themselves and in combination with stone, concrete, marble, organic glass and other materials. Suitable for climbing cracks and gaps between surfaces. The cost of packaging with a volume of 50 ml: 320 rubles.

What and how to glue aluminum with aluminum

With the development of modern technologies, firmly glue aluminum parts with each other was made possible by the cold method.

To do this, you will need:

• Cold welding Mastix glue;
• Sandpaper;
• Alcohol, acetone or any other degreasing agent.

To glue aluminum Such glue, you need:

• Clean the surfaces to connect from rust and dirt sandpaper;
• Degrease alcohol or acetone;
• Wait until the surface is dry;
• Cut off the desired amount of the rod and mix well two components with your fingers so as to obtain a homogeneous mass in the form of plasticine. Coloring should be uniform;
• Adhesive mixture on both aluminum surfaces that will be connected;
• Tightly press and fix them for 15 minutes until the glue will open.

What and what else can aluminum can be glued

Two-component aluminum glue on epoxy basis has high adhesionic and heat-resistant properties.

With it, aluminum can be glued with other materials with various thermal expansion: stone, porcelain, wood or plastic.

To glue an aluminum surface with other metals and materials, it is necessary to prepare:

• Epoxy heat-resistant glue gun epoxy metal;
• Sandpaper;
• Tassel;
• Means for degreasing the glued surface (alcohol or acetone).

After that, you can proceed to work:

1. Bonded surfaces to clean up coarse sandpaper to remove dirt and rust;
2. Degrease the details of acetone or alcohol;
3. Dry;
4. Squeeze into a separate container the contents of two glue syringes (epoxy mass and hardener) in proportion 1: 1;
5. Mix well epoxy and hardener with each other with brushes;
6. Apply glue with a tassel on both glued aluminum surfaces;
7. Connect the details and close them tight for a few seconds;
8. Excess glue immediately wipe the cloth;
9. Wait 30 minutes while the adhesive mixture hardens.

Although many do not recognize the efficiency of using glue for aluminum, correctly selecting the goods and performing glued works clearly according to the instructions, it can be achieved as much as possible compound.

Moreover, such a type of connection can be combined with mechanical fastening.