Excessive heating for chicks are unacceptable, so the automatic thermostat will be a useful device. Heating is usually carried out by one or two ceramic infrared lamps. With their absence, they can be replaced with ordinary incandescent lamps. Do not forget on top to attach the reflector so that the heat does not dissipate on the sides.

In the first 2 weeks of life, chickens are necessary round-the-clock light mode. Then the duration of the daylight gradually decreases to 14-17 hours for broilers and up to 8 - for non-bumps. If the lights are missing, the young will grow slower, if there are too many lights. For the lighting of the BRUED with the specified sizes, one incandescent lamp by 60 W or its energy-saving analogue is sufficient. In the cool period, you can cover the mesh door outside the plywood sheet.

Feeders put ordinary or bunker type, to pull out which will have to cut out an additional slot in the wall. The advantage of such feeders is the possibility of not disturbing chicks during feed. For walking of chicks, it is better to buy drinkers with sensitive nipple and a drop salary. In the ordinary plate or tank chicks can drown.

Nipple drinkers with drop salary will also preserve the optimal level of humidity indoors. Chickens need air humidity 60-70%. So that it does not increase need to pour water from the drops in time, remove the litter, the remains of wet feed. The room must be ventilated.

Brother with drawing

For the manufacture of a durable brown, you can make a metal frame from an equalone corner with dimensions of 25x25x4 mm, cooked with each other. Floor made from frames and mesh with cell size 10x10 mm. The grid can be fixed between the screw connection framework. Pallet cut and bend from stainless steel sheet steel. The walls cut out from moisture-resistant plywood 10 mm and to strip the frame by self-drawing on metal. IR lamps are attached on the upper wall, the thermostat - on the front. In the front wall you need to embed the viewing window of polycarbonate. Feeders and drinkers are inside the cells or hang on the side walls.

We are glad to welcome you, dear readers and guests of the site! Anyone who decided to buy chickens, which are several days, faces a problem: how to contain them, because in the first month of life they may die. The lack of heat, drinking, food, care will lead to the death of chicks. Solution - Bruner for chickens with his own hands. The design will help preserve offspring.

To save on the purchase of a ready-made Brudera, you can make it possible to make housing for "newborns", it is not difficult, having minimal skills and necessary materials. It is enough 2 - 3 evenings and a cozy nest is ready. This construction will be discussed today. Photos and video will help to visually navigate.

What is Brutere

I first encountered this term, the drawing in the head all occurs different. Bruner is a box, a box, possibly a room equipped to determine the chickens of the first week of life. "Device" performs the function of the clubs - the zepers, warming babies and providing food. Later, the young man moves to the chicken coop, how to build it told in the article: "".

Make a cloud itself easily, understanding its basic functions and the sequence of construction stages. Knowing the principles, the product can be done even from cardboard boxes.

What are the requirements for the BRUDER

The requirements are consistent from the factors affecting the growth of a healthy bird and the convenience of the poultry in the "maintenance" of the chicken house.

Not slippery floor.

Dry floor, otherwise chicks get sick.

Ideal will be equipped with a pallet for feces, under the floor.

Control the level of humidity.

Do not overheat with thermal lamps equipped room.

The heating source should not be in contact with the plumage of young, observe the distance from the ceiling to the floor.

Good, competently designed ventilation minimizes the mortality rate of the younger herd.

How to make bruder

The arguments, disputes about the right ratio of the size and number of chicks in the "nursery" are ambiguous.

Cleiscoly thought out the construction plan, even in the space 100 x 50 x 50 (length * height * width), it is possible to settle up to fifty chickens of chickens. Quail offers more. Broiler chickens are not needed to avoid "walking on the heads". There are no specific councils how to settle chickens - each poultry farmer is guided by its vision of upbringing future workers.

Important! Brudeer dimensions can be different. Our option is not the only one. Clearly calculate the parameters, drawing a drawing is the key to an accurate, reliable house for chickens.

What materials and tools are needed for the structure of the Brudera

1. Plywood, sheet thickness 1 cm, 150 cm Width and height (1 piece).
2. Rake with a cross section of 15 x 50 mm.
3. Four loops.
4. Mesh with galvanized, cells 1 cm x1 cm, size 50 x 100 cm (1 pc.).
5. Plaster grid to make doors.
6. Tin leaf, oilcloth or plastic base is the future pallet collection of feces.
7. Nails, selflessness.
8. Cable required length.
9. Dimmer.
10. Infrared Light Bulb 60 W or Normal 40 W.
11. Reflector light.
12. Cartridge.
13. Fork (1).
14. A hammer.
15. Hacksaw.
16. Drill.
17. Screwdriver.
18. Screwdriver.
19. Roulette.
20. Pencil.

Other tool if necessary.

How to collect Brutere

We cut off from standard plywood sheet (150 to 150 cm) the main piece of 50 * 150 cm.

Part 150 x 100 cm saws on three identical pieces of 1 m x 0.5 m (future roof, pallet, rear wall).

Side walls cut off from 50 * 150 cm of parts, size 50 (W) x 50 (B).

We collect walls. It is more convenient to knock down the frame at the beginning of the rail.

Then we make a frame using a rail to put it under the product. Approximately 98.0 x 49.0 cm. Plywood 1 m x 0.5 m - bottom of the Bruder. Check the clarity of calculations, nail.

Previous action - making pallet. Shipping it with a glue, we simplify the cleaning of feces.

We put the pallet on the place provided, slightly above the sweatshops - floor holders.

We make frames, as for the pallet, navigate the grid (galvanized) at the bottom. Close it with a newspaper, chickens will be warmer.

Locate both doors, taking a rail, stretch on them a plaster grid. 45.0 * 31.0 - approximate size.

Locate the frame from the rail, fix the nails on the front of the construction site, hang the door to the frame using the loop.

We cut the neck, if desired.

Drink a hole in the ceiling to exit the cable.

We stretch the cable inside, attaching the cartridge.

The opposite end of the wire is secured by a dimmer and fork.

Optionally, kpripim thermometer to the rear panel.

Attention: it is better to use infrared lamps, they are better heated, in comparison with ordinary.

Brother for chickens with his own hands is almost ready. We screw the lamp into the cartridge, we use the reflector - "place under the sun". The area of \u200b\u200bconstruction is heated by light unevenly. Refrigerators enhance heat under the lamp: chickens are warm under it. If it is hot, will go to another part, where it is so good. Equipped with "nursery" by drinker, feeder. Brother is ready!

If a lot of chickens are divorced, take two more such buildings and combine them above the other, gathering a frame. The design will allow you to contain cherochki, cockerels of different ages, various species. Painting a chicketer house at will.

You can make Bruner even from the old bedside table. Competently equipping it with all necessary, more than 50 chicks (quail, broilers, ducks) can be placed. The design can be made multi-level, setting the cabinets to each other. Reusable device: It is worth trying once.

Drawings, photos of the construction stages of the Brudera

Tell me in the comments as you did brower for chickens with your own hands. Share the article with like-minded people in social networks. Do not skip the world in the world of chickens.

Successes, lovers of chicken family!

Such ways are cheap. But they are good only when chickens are a bit or you have not yet decided on the question - is it worth it to the poultry farming. If the answer is positive, then you will agree that it is much more convenient to spend time and money once, but get a clean and neat stationary installation.

What better to choose - ready or homemade

So, it was decided - you need a clog. Where to take it? The first option is to buy. We go online and study the question. As a result, we get such information.

Finished bruders

Shops have a wide range of these products. You can order with delivery and assembly. There would be money. For example, you can buy such.

Its dimensions:

• width - 1.07 m,
• depth - 0.53 m,
• height - 0.52 m.

It has a retractable plastic pallet. The height of its side - 5 cm. The fact that the pallet for the accumulation of litter is made of non-corrosion material very well. It will be easier to wash.

The housing is moisture-resistant plywood, size of 20 mm. Painted material safe to bird health varnish.

The floor is a galvanized welded grid with cell size 25x12.5 mm. Since Bruner is universal (it can be grown not only chickens, but also ducklings, quails), then in the kit there is an additional liner on the floor. Cell size - 5x5 mm. It is intended for smaller birds or until the chickens are growing.

Heated by the brother infrared lamp, which turns on through a dimmer. It allows you to smoothly change the heating of the lamp, which must be done as chickens are growing.

The design of the Brudeer does not require an additional framework when forming multi-tiered batteries. They can be simply put on top of each other and get such a product.

There is one section of such a battery of 7,450 rubles. But this is not all expenses. The package does not include feeders and drinkers. And without them, it is impossible to contain birds.

As you can see the price decent. Over half of the square meter of the area, which will occupy Bruder, will have to lay a round sum. And it is necessary to chickens for a maximum of one and a half months.

Homemade

So is it worth spending such money. Not golden eggs carry our chickens. And if with cellular content of chickens makes sense to buy a finished product (you can read about this in this article), then for chickens you can not do. This is the place of their temporary content, not permanent.

Looking at the photo of the finished Brudera, it can be understood that this is a fairly simple product. In the presence of skill, screwdriver, the electrolovka and the girlfriend, it can be done independently.

Many craftsmen fit even old furniture. For example, various bedside tables or children's playpens, or plastic containers. But the latest products are good only for one-time use and with a small amount of chicks. And they don't say beauty, they do not differ.

Making homemade brider

If you need to post up to 60 chickens in bruder, you can build it according to such a scheme.

• Width - 1000 mm,
• Depth - 600 mm,
• Height - 450 mm.

In Bruder, with such dimensions, it can be comfortable to accommodate 100 quail or 40 ducklings.

The appearance of the bruder with the cut segment is presented in the figure.

The figures in the figure mean the following:

1. Steel frame.
2. Removable floor in the form of a metal mesh.
3. Retractable pallet.
4. Front folding wall.
5. Rear deaf wall.
6. Roof.
7. Side.
8. Carbette ceiling cartridge E-27.
9. Infrared heater Ceramic Iot / 75 60 W, having a helical socket E-27.

For the manufacture of a frame, a corner of 25x25x4 mm is taken.

For the floor, a steel mesh with a cell size of 10x10 mm is taken. It is attached to the frame with a screw connection. This size of the cells does not injure the paws of chickens and at the same time does not give to accumulate the litter in Bruder. Through these cells, excrement freely wake up into the pallet. It is possible to remove the grid for washing and cleaning.

The pallet for excrement is made of fine steel - 1.0 mm. The appearance of the frame with an extended pallet is presented in the figure.

Moisture-resistant plywood (10 mm) was used for the manufacture of the BRUEER housing. It is attached to the frame to the frame.

Infrared lamps are attached to the ceiling. The required degree of heating of the lamps is adjusted using the thermostat located on the front folding wall.

There is a plexiglass window in the front wall-door. The door itself can be fixed under the desired angle to ventilate and clean the Brudera.

For feeding, you can use standard bunker or tray feeders. And for the fiction of nipple drinkers with droplets. Depending on the type of drinkers and the feeder, they are installed inside the house or outside.

This device can be made by yourself. In it, chickens are contained until one and a half months. Then they are translated into adult cells or free walking. True, if you make brower for this scheme, it will not be cheap. But after all, to any process you need to approach creatively.

conclusions

Do not blindly copy seen. You need to choose what fits you. And this means before proceeding to construction, do the following.

• Decide which brud sizes will be required to your chickens - one or multi-tier.
• Spend a revision. Maybe you recently did repair, and you have a building material. These residues will adjust the dimensions of the future product.
• Make a drawing. Think where to locate and what better to use
  • drinkers,
  • lighting lamps
  • whether an additional heater and humidifier are needed,
  • will you use an automatic thermostat or limit yourself to manually.
• Count costs.

Kira Tsekolova

When removing the chickens in the incubator, you must need a clouder in which they will be contained in the first days of life. This device is made by themselves, without buying it in the finished form, because the price of finished chicks for chicks is often unreasonably overestimated. And it's easier to make a clouder for all chickens with your own hands, choosing a suitable design and necessary materials. But in the manufacture, it is necessary to take into account a number of requirements that the fully assembled device must be responsible. How to make brower for chickens with your own hands? What is the size of the brudeer for chickens depend?

Choosing materials for Brudera

The simplest brower for small chickens is a regular cardboard box or a wooden box quite large. But, although it is the most inexpensive options, they have certain disadvantages. If we talk about a cardboard box, you need to understand that it is easily destroyed, and is just as easily flammable. A wooden packaging box needs additional insulation. And both of these options are inconvenient in that manually it is extremely inconvenient to clean it, therefore it is necessary to make bruner manually that is, to build a brother for small chickens with their own hands.

If we talk about dimensions, then the classic version of the homemade bruder for newborn chickens is 1 m in length, and 0.5 m in height and width. Moreover, this option is suitable for growing broilers and for ordinary chickens. But for growing broiler chickens, it is necessary to prepare the design of the larger size in which they will move at the age of 1-2 weeks. However, if you make a brother for these chickens of large dimensions, they will be able to live in it before monthly. Here are what materials are used for assembly when we make Bruner for all chickens with your own hands:

• Cardboard from cardboard boxes. Cheap material, but it is too easily flammable and destroyed, because of what is not always suitable. His only plus is low price.
• Plastic. Plastic boxes are used by some farmers, but they have certain disadvantages. First, plastic can start melting with constant heating. Secondly, it does not always keep warm, but good, dense and durable plastic is not affordable when buying.
• Metal box. The main advantage of such a material is its durability, although it is necessary to make sure that the metal will not be oxidized from the constant impact of wet evaporation. Of the disadvantages it is necessary to note the fact that the metal box is not warm enough, and it requires additional heating and insulation system.
• Wooden box. The best option is from what can be done with your own hands. It is fairly inexpensive, with decent heat insulation, and even a novice master can work with a tree.

After selecting the material, you must first prepare the drawing, and in the course of the case, decide on the size of the design, then you should make sure that all the necessary materials and tools are available, after which it is already starting to build and make a brother for all-axle chickens with their own hands. There is another recommendation here: it is impossible to collect too complicated and large design, which is still not applications. It is better to make simpler and reliable brokers for the successful cultivation of chickens with which it will also be easy to contact.

Beginning of the build of Brudera

In this room, farmers contain both broilers and ordinary chickens. But you need to know that the brother for small broilers in its design does not differ from other similar designs. The size of the box is calculated according to the following principle: 100 chickens have enough room with a volume of 0.5 cubic meters. Moreover, the height is always equal to the half-meter. Well, for fifty kids, the model is used already described: the meter is long and half the meter in height and width. If we consider this density, then calculate the dimensions is easy.

First of all, creating brudes for mass cultivation of chickens need to prepare drawings of the finished design. If there is a drawing skills, you can draw them with your own hands or print on the printer. It is advisable to look at the video, how typical drawings look like and prepare everything in exactly the same form, then you already need to start making a box. Begins the manufacture of a brown for small chickens with their own hands from the build of the frame. There will be a classic wooden version that is most convenient for most farmers.

Frame for Brudera

It is not difficult to calculate how many plates will be required to make a frame. Bruder on 50 chickens need eight meter lengths and four racks of half the meter. In terms of sizes, everything must be respected with an accuracy of a millimeter. Error even by 1 centimeter will lead to a breakdown, because of which the slots or the box can become unstable. From four-meter rails you need to make legs. In the middle, 2 meter and 2 half-meter rails will be attached (they will be the base for the floor).

From above, the last 4 rails are fixed on which the drawer lid is installed. Everything must be connected by screws or screws. If it is planned to make a pallet for cleaning the litter in Brueder, then the rails should be 4 more. You need to make another 2 meter and 2 half-meter rails. They are fixed under the base for the floor to make a gap in which the pallet will be included. And the floor itself in this case should be made from a finely mesh, on which the chicks will go.

The cost of manufacturing a brudera. Brother for chickens with his own hands.

Bruner do it yourself. Brother for chickens with his own hands with automation.

Brother with a thermostat for 50 chickens.

Brother for chickens with their own hands // Simple and fiscal

Brother for chickens with her hands Drawings Video - Zolotyeruki

Brudera walls and doors

After the frame was collected, it is necessary to attach the walls and the roof to it. As already mentioned, the bottom must be made from the grid and a removable pallet. And here it is worth repeating one recommendation: although Bruner is easy to build, it is useful to look at the photo and video, as professionals collect it with their own hands. But it must be remembered that different materials require different investments and differ and cost, and durability. From the wood it is best to use a dense phanener with a thickness of 10 mm.

The walls are made from one-piece plywood sheets so that no extra gaps appear. If there are no plywood, you can take a chipboard or a regular board. But the manufacture of the walls from the boards is somewhat more complicated, as they are harder to fit together to each other. And all the chicks that chickens are that quails are vulnerable to drafts - it always harms such unaccounted ventilation, so the walls are usually not made from the boards, but from solid DSB panels, fiberboard or plywood. But before making walls, it is necessary to decide where the doors will be located.

Manufacture of Brudera doors

In most cases, the doors are made from the side or on top of the design. In some situations, they are not made at all, but this case will be discussed below. Doors are usually done as follows: 2 sash in the form of a frame is assembled from plywood or boards. In the closed form, they should fit tightly to the frame, not leaving the gaps. They are fixed on special loops, which are usually bought in a shopping store. The device of these loops is too complicated so that they can be made at home. The mesh is then fastened to the grid, after which it is sometimes closed by plexiglass or polycarbonate.

In order for the bird to feel comfortable in a cage, and its content was not complicated by superfluous injuries, there should be no sharp protrusions, so the cell is done so that the fasteners turn out to be outside. It spoils the appearance of the design somewhat, but it protects chicks from extra injury. This applies to both brudes for chickens and those that were made for quail.

Both for daily and weekly chickens are important. When in the room it becomes too high humidity and unpleasant evaporation accumulates, it does not affect health. In order not to spend extra time for treatment and simplify the content of kids, you need to think about ventilation in advance. The simplest option - the door is not closed completely by plexiglass and the top is left with a small lumen. And sometimes there is a hole in the lid through which evaporation and will go out.

Further placement of the room

After the body was assembled, you should think about how to make heating and lighting of the Brudera. Usually for these purposes are used that give heat and can illuminate the box. Some regulate the temperature empirical method. Before planting chickens or quails, lamps are installed and check what they give the temperature, then they change the number of lamps if required. On the other hand, there are special devices, the relays and the setting.

There is another simple scheme that allows you to simplify ventilation and. In the lid of the box, a large hole is made through which all evaporations come out, and the lamps for heating are installed in its edges. You can also connect the device to adjust the power. If you install inside a fairly sensitive thermometer, you can easily change the temperature to the desired level, and you can still save on the doors, simply by making them solid, without windows.

Installation of cream and feeders

As for chickens and quails, such drills and feeders will be required, which they will not be able to flip or blot. In particular, it is often a steady saucer in which the water bottle is inverted up the bottom. From the bottle as needed to drink, and the sama is often made in the form of a trapezium with a wide base. Then it is extremely difficult to turn over. Well, to get into it with my feet, it does not give a durable fine grid without sharp edges.

This is how the feeder for chickens is being done:

"Little chicks always strive to scatter food, trample it, and then mix with the litter. Moreover, many of them are in the end remain hungry, so it is necessary to make the feeder at such a height so that the chickens can eat from it, but could not get into. From above, it is covered by an inclined lid, so that the gap remains, into which the beak would have sewn. At the same time, the feeder itself is also made inclined to make food from it constantly lined towards this gap. Then the chicks will eat conveniently, and the food will not leave the vapor. "

Conclusion

Brother for chickens make very difficult. This requires a farmer of certain skills and investments of funds. But many materials manage to get almost in vast: from old boxes, broken furniture and the like. But the benefit from the collected design is difficult to overestimate. When using the Bruel incubator - it is hardly the only place in which the chicks can be normally contained.