The drill is a universal type of tool, by means of which you can drill holes of different diameters in various types of materials. The disadvantage of this tool is the need to keep it with two hands when carrying out drilling events. For stationary drilling of holes in a variety of materials and billets, more conveniently use the drilling machine. Not everyone who wants to buy it especially for such purposes, therefore a drilling machine from a drill can be constructed independently. How can this be done, find out in the material.

Before proceeding with the production of a self-made drilling machine from a drill, you should find out what these types of devices are. Products are divided into the following types:

1. Radial drilling. The most effective view of the machines to drill holes in large and medium sizes of details. The vertically drilling type of the machine is also called stationary, as it is that such devices are often used in repair shops, shops, garages and various enterprises. The accuracy of drilling with such an aggregate is ensured due to the fact that the drill is applied to the workpiece.
2. Vertically drilling. The principle of work is that the drill is fixed, and the harvest itself moves.
3. Horizontal drilling. Apply on production to process long-term parts.
4. Multi-spindle. Apply in the case when you need to drill, cut into the thread simultaneously and exercise.
5. Specialized. Aggregates for deep drilling.

In the production of electronic circuit boards, tabletops are used in which the cutting tool moves with the help of the handle. For private use, it is recommended to make a radial-drilling type of tool, where instead of the engine and pulleys, an ordinary electrical drill will be used.

How to make a simple drilling machine

The advantage of independent production of the drill machine is the ability to upgrade the product. As an upgradation, you can create a machine with vice for a drill, which will allow you to fix the workpiece with subsequent processing. For the construction of a self-made machine for a drill, there is no need to acquire special materials and completeations. All that is required to assemble the device is a healthy components that are in the garage for each wizard. For the manufacture of a machine for a drill with their own hands, it will be necessary to make such composite elements:

• Stanna.
• The working mechanism presented in the form of a drill.
• The stand of the vertical species to which the drill will be attached.
• Handle or mechanism for feeding the cutting element.

Drawings in the manufacture of a drilling machine from a drill with their own hands will help speed up the process of producing the device. But for a start, you need to think over everything to the smallest detail by making outline on paper. After that, it is possible to embody everything into reality.

• As a fastening for a drill (pads), you can use such material as a chipboard. You can fix the tool with other similar materials, but it is important to take into account that the design should be fixed and reliable.
• The massiveness of the bed plays an important role, as this will ensure the stability of the apparatus. As a bed, a regular workbenk is well suited. His weight will eliminate the occurrence of vibrations when working.
• The vertical stand must be securely fixed on the bed. The main details are guides through which the pads will be moving with a drill. The height of these guides and the entire rack should be chosen on the basis of how long drills you will use, and from the planned thickness of the billets.
• To secure a drill, it is recommended to apply clamps or sheets of steel. To eliminate the occurrence of vibrations, it follows between a drill and connecting pads to lay a gasket from rubber.
• From a drill to make the machine at all is not problematic, especially if there are suitable materials. An important point is the mechanism responsible for moving the tool up and down. The schemes of such mechanisms may be different, but the simplest design is the presence of a lever with a spring. Spring is fixed in one end to the rack, and the second to the block.

If you do not plan to remove a drill from the landing place, you can disassemble the tool, and output the "Start" and "stop" button from it to a more convenient place using the optional switch. This will allow you to respond quickly in cases where the drill is encouraged in a drilled billet. Below is several options for ready-made self-made drilling devices from a drill.

Other options from drill machines

Wrongs for itself to make a drilling machine for home use, it is important to determine the disposable set of components. This article is presented for informational purposes in order to give an idea for making a homemade machine. Options for the production of which, a huge set, an old microscope, jack, various tripods and other aggregates can be used. Not so much important that it is taken as the basis, like what happens to you in the end.

If it is planned to work on a boring machine with a tree, and a thickness of up to 2-3 mm thick, then it can be built from wooden parts that is not difficult to find.

If it is planned to work mainly with metal blanks, then the device is better made from steel components. Such an aggregate will be much more reliable, and most importantly, he will be able to cope with its destination.

Even for a beginner will not be difficult to make a homemade drilling machine for the house. The main thing is to be patient and time, and you will definitely work out. And do not forget that no matter how it was, but such an aggregate is homemade, so observe the safety technique when working with it.

Good afternoon! In this review, I will show how you managed to make a small simple drilling machine from the purchased rack under the drill and existing, but rarely used, manual electric cries. I tried to make a complete and convenient adaptation for amateur and domestic needs, no complaints about professional use. As always, in the review Description of the process, drawings, and the result.

All previous years for drilling holes, I was quite a screwdriver, well, very rarely hand drill. This was enough, there were no problems on the details with a small thickness. Another question is the drilling of clearly vertical holes in a large thickness of the material, sometimes it turns out to control the vertical of the drill, sometimes not very.
Making a smaller hole with a larger diameter drill: Often, when drilling, the initial center of the hole could and shift, depending on how the drill is found there.

To avoid all these problems, the responsible details and billets should be drilled on a boring machine, which is naturally not.
I have already reached the condition when the drilling machine is needed, but what exactly I want from him, what parameters are important for me, and what you need to choose - I do not know yet. Therefore, to develop experience and forming future needs, for better and effective investments in the drilling machine in the future, I decided to exercise on a homemade machine from a rack for a hand drill.

You could just buy a rack, place a drill in it and use, but I needed to make a convenient turning on and off drill, as well as convenient adjustment of the speed of rotation. Therefore, I decided to make a small pedestal for the rack, with the controls placed in it, as well as a drawer for drills and other accessories.
And at the very basis of the rack, I decided to make a wider table for placing and fixing blanks for drilling. During the design, it turned out such a design (rack and drill in the model Others, took from 3D Warehouse):

The design of the box is as follows, with an organizer installed in it for frequently used drills:

Drawings with dimensions:

After examining the open spaces of the network and reviews, a fairly well-known rack for a drill with all-metal column and cast-iron bases and a carriage was selected. ()
Several photos of unpacking and assembly:

People in the reviews write about the backlash in the plastic guide carriage, and a small luft at the point of the column-carriage, but not everyone. I got the play of the plastic guide, which was cured simply with a piece of plastic from the folder for papers. The backlash disappeared at all, the carriage began to go up-down tight, but the thick silicone grease removed this problem. Excellent rack, heavy, monumental!

In the quality of the working part of our machine, an old, but the vigorous drill of Interskol Du13 / 780.R:

Drill tightly went into the receiving nest on the rack, no backlash, fixation is excellent:

We start collecting our pedestal with a box. Flying details of the pedestal. In the project I laid 10 mm thick, but it happened that I had an already started sheet of 12mm, which I have for some reason took 10mm, my sizes and I could not understand why):

We collect on the self-tapping screw and PVA:

Food the details of the inner drawer, the bottom of the plywood box 6mm:

Collect the box:

We prepare and gluke back and front pedestal plugs:

For drawer, use furniture ball guides:

For fastening the box to the hinges, put a sheet of plywood and put four 10 ruble coins to create a uniform gap between the drawer and the base of the pedestal:

We drink and glue the front panel of the drawer on the PVA, the gaps also adjust the coins:

Do not forget to make a handle for opening a box:

As a filling for controlling / off and adjusting the revolutions, it was picked up in the covers such a kit: a relay with a coil 230V, two buttons, C NO and NC contacts, and a symbol speed controller (2000W) with Aliexpress:

On the front panel, mark the holes under the button and the controller potentiometer:

Drills holes. Under the potentiometer handle, it was necessary to make a slight deepening with a dreamer with a cutter, since the thickness of the front panel is 6 mm, and the knob is normal on the potentiometer shaft did not sit down:

We try the buttons:

On the rear plug of the block of the buttons, I decided to put a rosette under the plug of the drill, as well as the gland input for the power wire from the network:

We take the top cover of the pedestal, placing and drills the holes for fastening the base of the rack (the top cover of the pedestal was not glued, fucked only on the self-tapping screw):

Go to the manufacture of a boring table. We will do from two plywood sheets:

We connect two sheets into four self-pressing, place and cut the jigsaw of the groove under the column of our rack, we refine the dremel:

Location Corners:

We place, we take the milling and groove cutter f10mmm on plywood stop make the grooves under the movable fittings of the table, as well as rounding tables:

We disassemble our detail, take the bottom sheet, place and drill in it holes for fastening the table to the base of the rack:

On the back, for the attachment, it was used here such fasteners with a thread M8 to drown the hats, made a deepening with a densem:

We take the top sheet of the table, placing and drinking a square hole 70x70 mm under the broken liner. Liner with mixture relative to the center so that it can be turned over and use all sides of the liner square:

We glue on the PVA both sheets of our table:

We are preparing clips for the table. They made them from trimming plywood, a little squeeed the resulting heel, so that a good clamp of thin parts was obtained. An opening of 8mm under the pressure bolt has a little developed in the longitudinal direction so that the bolt in the details can be deviated relative to the vertical axis.

We try our clamp in action, use a long furniture bolt M8, washers and a carrying nut:

We take all the details of the machine, grind and coated with oil:

We put all the components of the power and control system, buttons and relays are connected according to a self-grade scheme:

We make an inclusion check, all put and fix the wires:

From the bottom of the pedestal, we put the rubberized legs:

Fresh drilling table to base rack Naiki M8:

Insert the box, we look at what happened:

Go to the manufacture of an organiser for drills. All parts of the horizontal branch of the organizer from plywood 6mm. We cut the base according to the drawing, drink thin strips of plywood, and we collect flights on the PVA:

We write the dividers of 6mm wide on the table (for such operations, I had to make a zero gap of aluminum on the sawing table, since the original surface of the table was already worn out, and strong chips went on the plywood):

Glue separators through a template 14 mm on PVA. Depth and width (6x14 mm) branches taken at the calculation of his fingers so that I could easily take a small drill from the bottom of the department:

The vertical organizer for the very chassis drills (two compartments under the metal drill and wood) decided to make 12 mm from plywood, but on top of gluing a strip from plywood 6mm, since it is very bad in the end of plywood:

We try our vertical organizer to horizontal:

We mark and twist already on our table holes in the organizer by all accessible drills, from 8mm to 1 mm with a pitch of 1 mm diameter:

We are trying on both organizer in the box:

Covered with butter new details, put in the box. The vertical organizer put on small loops so that it could be thrown into a fully vertical position and have access to the drills in the lower separation.
Before the horizontal organizer, it was glued in the box that stopped from a piece of plywood 6mm, after it in the box a little later there will be an organizer under cutters, cenks and other major drills. Also prepared several square replacement liners:

We collect all the details of the machine, we turn around and secure a drill cable so that I did not interfere:

We work:

The drilling machine was suitable. Drilling is so much more convenient, and most importantly more precisely and more careful. No, of course, maintaining revolutions, it would be even comfortable with him, but I'm already starting to get used to what speed should be put on the drill and the power of diving for the material, so as not to delay the drill, but also not to spoil the workpiece or part of high speed. This all experience is being worked out. I will work on it, I will understand what I need and important from the machine, which parameters will be critical to me, so that it is possible to consider the "adult" machine in the future.

In the nearest plans to make small vice machines for vertical fastening of blanks and grinding drum, I need them for approaching projects.

»From the material presented by the author, you will learn how to independently make a budget drilling machine from a conventional electric drill.
Each master person would like to have similar machines in his farm, because in comparison with factory analogues will cost tens of times cheaper, and if all parts and components are available, it is generally free.

The author of this machine is Igor Stasyuk, for which he has been thank you very much, shared step-by-step photos of the assembly of the machine with the people. The design is quite interesting and at the same time simple. On the base of the metal sheet 3 mm, the corners and 4 legs were welded, the rod of 500 mm is welded from the proficate pipe of the square section, the slider is made of 2 x corner-boiled corner and put on the lifting column with the gap, so that the slider can move along the column up and down. The lifting mechanism is activated due to the cable of the tight point of the top point to the bottom, and the cable makes several turns on the slider.

And so, let's carefully consider what specifically needed the author to assemble the machine? As well as the whole phased process.

Materials
1. Sheet metal 3 mm
2. Armature
3. Corner
4. Circuit
5. Drill
6. Visks for billets
7. Bolts, nuts, washers, engravers
8. Clamp for a drill
9. Paint
10.Prof Square Pipe
11. Drill

Instruments
1. Welding machine
2. Bulgarian (USM)
3. Drill
4. Fries
5. Visits
6. Clamp
7. Schunzirkul
8. LINEK
9. Corner
10. Level
11. Emery paper
12. Brush
13. Metal hacksaw
14. News

The process of creating a drill drill machine.
And so, the first thing the author manufactures the base of the machine from a sheet metal 3 mm, cuts off the workpiece with the help of a grinder (ESM) and in the lower part, weld 2 corners and 4 legs made of steel rods or fittings. The length of the legs should be the same, in order not to skew the bed.

We wore corners and legs.

Making a slider! 2 corners are taken and applied to the professional pipe of the square section that will serve as a lifting column and are tightened with clamp.

At the edges, it is grabbed by welding in order to simply push it while, and then specifically to slaughter a normal seam.

That's actually such a workpiece turned out.

The lifting column is made from the corner of the square section of 500 mm long.

A bracket with a moving shaft on which the cable turns will be made on the casing body.

A thread is cut in the drilled hole.

The handles of the lifting mechanism are made of reinforcement.

On the shaft there is such a head that will be the base for the handles.

And so, 3 handles are brewed for the convenience of lifting and lowering the drill through the mechanism.

Installed on the lifting column.

At the end of the cable there is such a loop.

The principle of lifting hope is understandable and without explanation)

A square tube is welded to the corner.

That actually such a fastening for the electric drill turned out.

Then the drill is installed and fixed with the bolt clamp and nuts.

Now let's return to the lifting mechanism.

In the upper part of the lifting column, the nut and the bolt is twisted into it, the cable is fixed on the bolt itself and when spinning and unscrewing the bolt occurs the cable tint to the optimal norm.

Moving nodes are preferably pre-lubricated with solidol or lithol.

These small testicles can be purchased in the construction store in the Tools section.

All items were primed by a master using sandpaper, and then painted.

Drilling machine with your own hands can be made at home from an ordinary electric drill or steering rack.

In the workshops of radio amateurs mini homemade machines are most often found for the reason that it is not difficult to buy industrial aggregates, but it's not difficult to make the device with your own hands.

Thought - how to make a drilling machine (including with the help of a steering rack), it comes to mind not only by radio amateurs, but also to people, from time to time in need of repair work in everyday life.

At the same time, special adjustments or high-strength materials are required for the manufacture of micro unit.

At the initial stage, it is necessary to create drawings to facilitate the process of making the machine.

Drilling boring aggregate

You can collect a twisted mini drilling machine from a drill with your own hands from four main components. The first thing you need to do to create an additive machine is to choose the face - the basis for the future.

As a mechanism of rotation, which is necessary that the additive mini machine function is functioning, an electric drill can be used. Then you need to decide on the feed device and the vertical type.

Since the drill has a slight weight, it is not worth looking for special adhesions and very durable materials, you can take wooden boards or chipboard.

For the bed, on the contrary, it is necessary to choose more massive material, which will eliminate the appearance of vibration during drilling work.

The appropriate material in this case is a furniture plate with a thickness of 2 cm.

The optimal option when choosing a material for the manufacture of the bed can be a rack of an unnecessary photo ventilator, but its design will have to modify a little.

The accuracy of the drilling process on a homemade mini unit will depend on the quality of the compound of the vertical rack and the bed.

From steel strips It is necessary to cut two guide strips for moving pads with a drill. Attach these adjacent to the rack of screws.

For reliable drill holding, steel clamps are used in the manufacture of pads.

Between the drill and the block, the rubber gasket is placed in order to reduce the vibration of the drilling mini machine.

The mechanism of filing the machine is a simple lever with which the block with a drill will be moved vertically. The mechanical device is equipped with a spring, quite powerful and elastic.

One end of the spring element will be restarted into the block, the second - in the bar attached to the table.

To achieve the most convenient use of the drill mining machine, provided that the drill is not planned to be removed from it periodically, it will allow a complete discerning of the drill switch and mount on the bed of a separate switch.

Consider to the smallest detail, as using an electric drill to make an additive desktop drilling unit, in the proposed video.

Steering rack for drilling machine

The drilling machine can be performed using an upgraded steering rack. Since the purchase of a new steering rack will no longer be cheap, it is recommended to purchase a used part, preferably from VAZ 2108.

After purchasing the steering rail, it is necessary to carry out preventive repair of the part in order to ensure its smooth move.

Instructions for the manufacture of bed and its installation:

• The machine housing is performed taking into account the sizes of the drill and column. The table on which the platform will be recorded with drilling parts must have suitable dimensions, approximately 20x30 cm;
• The design with which the drill will be enshrined, mounted on the steering part in the locations of the mounting bolts;
• The rack for the drilling machine is performed from the P-shaped steel profile 30x60x30. It is welded to a sheet of metal with a thickness of 2 mm. The rack must have a height greater than 6-7 cm the length of the column. The rod for the steering rack from the VAZ 2108 is 210 mm;
• Due to the mounting of additional ribs between the two elements, the rigidity of the rack increases.

For a comfortable use of a drilling machine, it is recommended to consider a convenient system of its startup and shutdown.

Extras will allow thematic video material.

Drilling machine for printed circuit boards

To assemble a drilling micro machine for printed circuit boards, you will need the following details:

• micro motor or high-speed engine;
• clamping collet for fixing miniature drills;
• two wooden bars, p-shaped profile, fastening ring for fixing the electric motor;
• mobile platform of the machine for printed circuit boards - is made independently from the primary materials.

Collecting a desktop micro boring machine for printed circuit boards, it is recommended to pay attention to the fact that the drill is descended accurately perpendicular to the board.

The video below shows a mini boring machine for printed circuit boards.

If the motor is selected, then when drilling the control circuit boards, the drill will fail. A clearance and poor fixation of the motor is not allowed, with strong revolutions it can knock it out of the bed.

How to make a micro machine with your own hands to drill the boards will tell video material.

Coordinate table design

If in a homemade drilling machine, the focal table functions performs the feed mechanism, the coordinate milling table has a different design.

The coordinate milling table is a manipulator consisting of a certain number of axes. The milling table for movement in several planes of the technological head is intended.

At home, it is possible to make a milling table using a linear type modules made of aluminum profile.

As a gear, a gear rail is used, a reinforced belt or a ball-screw element.

Numeric Software Management (CNC) and Action Controllers are required to manage the coordinate table. Controllers are used to manage technical tasks.

To make a milling table, first make drawings, make calculations and pick up components.

At the same time, the calculation must be suitable for technical requirements for the use of the machine, including moving mass, speed, acceleration, and accuracy.

The construct of the coordinate table may have a lightweight or strengthened form, be two or three coordinate. That is why it is recommended to initially decide why the milling table will be required.

Two coordinate table - base with mobile cross. It mounted desktop. In the Cross, there must be hardened adjustable and polished rails.

Stopper stacks are also installed to eliminate the lumen. The base is fixed on the legs.

More details about the manufacture of the coordinate table, you can learn from the proposed video.

Homemade vices for machine tools

If the Soviet vice does not afford to you, and the Chinese products do not like it, then you can make it in addition to a drilling machine with your own hands.

To collect homemade vice, you need to have the following details at hand:

• screw - 20 mm thread, length - 150 mm, the screw head should have a slot, as sometimes it does not fit the size of the handles, and it is expanding it using a file;
• screw with ring is used as a knob for twisting;
• studs can be purchased in the store or find in old details;
• then it is necessary to make a fixed sponge, it is possible from a pine tree, and the board is naked to the tabletop;
• for the manufacture of the mobile part, the board will be required (20 mm thickness, 18 mm width), the length of movable sponges should be at least 50 cm.

In the tree they do the holes with a diameter of 21 mm. The diameter of the holes in the hairpins should be 10 mm. Studs, screws are installed in the finished holes, nuts and bolts are styled.

If vice is applied to work with short blanks, the studs are rearranged in the design.

Things are supplied with additional holes that should be located near clamping screws.

Homemade vise can have different parameters, it all depends on the details of the details.

When a joinery and plumbing works are commonly used by the appropriate tool designed to perform specific tasks. However, there are such situations when it is much more convenient and easier to use special machines. They allow you to optimize the process and save time with the same type. Therefore, questions about how to produce a drilling machine from a drill, very often arise from modern masters.

Need or luxury

First of all, it is worth saying that it is very convenient to use such a device in the manufacture of holes in small horizontal planes. It practically completely eliminates the drill from the backlash, which necessarily occurs when manual work. Even small of the drill significantly increases the accuracy of the hole done, the minimum reducing the error. Also, such equipment is very saving time and strength, if you need frequent use or monotonous work.

Almost all enterprises on which plumbing work are performed are equipped with such aggregates. The fact is that the study of labor protection has shown an increase in productivity and quality improvement when used. Some of them acquire even a boring machine on a magnetic sole to optimize production on large planes without the use of expensive equipment.

Why drill?

Currently there are a lot of structures to create such equipment at home. However, most experts recommend making a drill drill machine. This is due to the fact that this tool already fully contains all the necessary components and aggregates, and they will not have to be purchased separately. At the same time, fixing on the design is performed so that it is easy to remove the drill for independent work. As a result, we do not lose a tool that can be used independently.

Materials

In order to create a boring machine from you need to purchase the tool itself. It is selected in accordance with the parameters that will have to have a ready-made device. At the same time, experts advise paying attention to products that have their own small backlash. Otherwise, the expediency of using it for work is questioned. You may also need:

• Guides. As they use systems used in furniture manufacturing, or metal strips.
• Stanna. Most often it is made from a metal plate or a wooden box, on which magnets or ballast for weighting are attached.
• Fasteners When they make a drilling machine from drove with their own hands, they immediately pick up clutches or clamps suitable for fixing a particular tool.
• Wood or metal structures - depending on which material to process.
• Spring required to implement the reverse stroke.
• If a drilling machine is created, the magnets themselves will be needed.

Tool

In this case, the selection of the tool used depends on the material to create a frame. However, it should be immediately noted that the corner for measuring the connection of elements under 90 degrees will be necessary in any case. Even a mini-drilling machine with its manufacture requires compliance with great accuracy, since this will subsequently affect the quality of the holes made.

Drawing

First of all, you need to decide on the structures of the final product and the material of its manufacture. However, no need to invent too complex technical solutions or expensive nodes. A typical drawing of a drill bit from a drill is quite simple. It involves the creation of a solid and stable bed, on which a vertical tripod is attached with a movable carriage. Given this, it is worth paying special attention to the implementation of the movement of a drill in a vertical plane, although the use of ready-made guides greatly simplifies this process. If the support of the microscope, photovoller or press is used as a frame, then the drawing will be based on their base, and the entire manufacturing process is greatly simplified.

Stanina and tripod

Even a mini-drilling machine needs a sustainable foundation. It not only must hold the entire design, but can be equipped with various elements for fixing tools or other devices. Thinking the device of the drill machine, it is worth listening to the advice of specialists. Many masters recommend creating these wood devices. Therefore, a wooden frame as a small drawer is used for the bed. It has landing places to install vice or other structures. If the product is planned to be used on large surfaces, then the bed is made from a solid slab with a hole under the drill. So you can implement the principle of drilling through.

Almost any device of the drilling machine involves the installation of a vertical tripod at an angle of 90 degrees to the bed. Therefore, in the work it is very important to use the accurate also need to make a reliable fixation of the tripod using additional mounts in the form of corners.

If the work is assumed at a certain angle, you can pre-make certain devices that will be attached on the bed. Most often in such cases, ready-made balls with an adjustable tilt angle are used.

Creating a movement mechanism

When a homemade drilling machine from a drill is made, then this stage needs to pay special attention. The fact is that the vertical move should be soft, without distortion, backlash or displacements. Given this, professional masters recommend that you use ready-made guides that can be taken from other devices. You can also use systems made to extend boxes from cabinet furniture. They are reliable and can withstand heavy loads.

Installation of guides produce directly to tripod or special planks attached to it. In this paper, it is very important to use the measuring instrument, since these elements should also be located at an angle of 90 degrees relative to the bed and in parallel to each other. Do not even allow small distortions or displacements.

The second part of the guides is fixed on a special carriage, where the drill itself will be installed. It is made of wood and customized under the sizes of the source tool. Also, a small handle is also attached to the carriage, with which the operator will control the process of movement.

To implement the return movement and facilitate the control of the carriage, the spring is installed on the machine. One end is fixed at the top of the tripod, and the second is mounted on the movable mechanism. At the same time, immediately check the level of its tension, which, if necessary, can be changed by cutting the turns or their stretching. However, it is best to produce such a setting under load, which means it is performed only after fixing on a drill carriage. Some masters recommend to do the removable spring, it could be extracted after work. So it will not stretch and weaker.

Fixation drills

Usually, instructions telling how to make a drilling machine from a drill, recommend creating special fasteners with which in the end it is very difficult to work. However, if the tool is properly correct, it can be fixed using conventional plumbing clamps used when creating connections of hoses with pipes. At the same time, it will be necessary to make certain changes in the shape of the carriage or even slightly adjust the drill housing.

It is very important that the tool is fixed tightly and moved in the clime. Therefore, at the stage of manufacturing the carriage, it practically does not leave free space, limiting structurally from all sides. In fact, the carriage itself is a peculiar bed for a drill, in which it will sit very tight. Additional elements are needed only for the reliability of fixation. This approach will greatly simplify the design and will allow you to quickly extract the tool if necessary.

Output

Given the material set out above, it can be concluded that the drilling machine from a drill can be made independently and without large financial costs. In this case, the final product will be maximally adapted to the execution of specific technical tasks will be able to satisfy the corresponding destination of the end user. However, it is worth considering the fact that factory structures usually have a smaller error and are able to perform accurate work with minimal tolerance. Therefore, such devices are usually suitable for private use or in small workshops, where it is not required to create high accuracy holes.