Actual air performance from 2500 to 22 000 m 3 / hour (for each riser), taking into account losses in the power unit and a handout. Thermal power from 10 to 140 kW. Equipped with electric, water or steam heat exchangers.
Location options: vertical (unilateral, bilateral), horizontal. You can install in openings using any type of gates - swing, sliding, rising upwards. Opera area - 4 m 2 ... 36 m 2.
Automatic control systems have been developed for the protection and control of the parameters of air-thermal curtains. Built-in system of noise absorption.

Appointment and conditions of operation

Thermal curtains TZK-Innient are intended for use in residential, civil and industrial buildings and premises to prevent the penetration of cold, hot air, dust, gases, etc. Through the open gate, doors, etc. Operactions. The possibility of using a curtain for the main or additional heating is solved individually, depending on the source data coming from the Customer, using the control system with additional options or special execution.
Curtains serve to treat air with a temperature from -40 0 s to +40 0 s (+45 0 C for tropical execution), in conditions of moderate (y) and tropical (T) climate of the 2nd category of placement, no worse, according to GOST 15150.
In the air of the serviced room, the presence of inclusions that are aggressive with respect to the steel of ordinary quality, explosive mixtures, sticky, fibrous and abrasive substances, with dustlessness of not more than 100 mg / m 3 are not allowed. The average quadratic value of the vibration of external sources of vibration in the installation places the curtain should not exceed 2 mm / s.

Overall drawing

Power block:
1.1 Protective grid at the entrance;
1.2 Fan;
1.3 Spacer;
1.4 Caloric block;
1.5 Brackets;
2. Insert flexible;
3. Air discharge box.

Table 1. Overall characteristics

"S" zone of outputs of water / steam calorifers or the installation area of \u200b\u200bthe power automation unit for calorifers with an electric heat carrier.
* Size L is determined when designing the curtain and depends on the size of the elements included in the power unit.
** Size L 1 depends on the placement conditions of the curtain and stipulates in the order of the order on the TZK-Innient.

Power block:
1.1 Protective grid at the entrance;
1.2 Fan;
1.3 Caloric block;
1.4 Frame;
2. Insert flexible;
3. Air discharge box.

Equipment

The air-thermal curtain of the TZK-innunt consists of a power unit, an air dispenser and a flexible insert that connects the power unit with the air dispenser.
The composition of the power block of the basic execution includes:

• Protective grid at the entrance;
• Fan;
• Calorifer (coolant - water, steam, electricity).

Elements of the power block of sizes 1.6 ... 3,15 are installed on removable brackets, and elements of the power block of sizes 4 ... 6.3 are mounted on a shared frame.
When ordering a TZK-Innient in a special design to the composition of the power unit, a noisemaker and / or filter can be enabled, and other consistent requirements are made.
The fan blocks for the curtain number 16 ... 4 can be made both in noiseless design, and without silence. Fan blocks No. 5 and 6.3 are performed only in noiseless execution.
The air-discharge box at the request of the customer can be made of galvanized steel or customary quality steel, followed by applying paintwork, including in noiseless execution.
Air-thermal curtains operating in a wet environment, such as car wash, are equipped with special execution electric motors with the degree of protection of IP54 and, in the case of electrical heating, stainless steel tanks.
Equipment of power blocks curtains with electric, water and steam factories under operating conditions with negative and positive values \u200b\u200bof the surrounding air.

Table 2.

Layout air-thermal vendors

Thermal curtains of the TZK-Innient are produced with different layout of the power block and a dispensing box.
The recommended location of the curtain - with a vertical location of the dispensing box. The curtains with the horizontal location of the box above the gate must be installed in exceptional cases, since when the air is supplied from above, there is significantly more likely to make warm air from the room than with lateral single or two third-party feed.
Standard air-thermal curtains TZK-innunt are manufactured with a transfer box, providing a flow outlet of the slots parallel to the plane of the gate. At the same time, in the case of a breakthrough of cold air to the room, most of the air heated in the curtain returns to the room.
The version of the air-thermal curtain is determined by the availability of a free space in the gate zone and the type of gate. Practically, a fan-thermal block with a water or electric heat exchanger can be installed in any position and is connected to a dispensing box with a corresponding adapter.
When installing a curtain in a room, which has a small ceiling height, the power unit can be connected to the dial of rotary knee - the curtains of the angular A, B.

Particularly compact curtains

In the absence of free space above the gate, corner curtains are used, specialized C, D.
In some cases, it is preferable to use curtains with one power unit running for two handouts - E, F. If there is a standing gate alternately, curtains with one power unit are installed in intervatal openings, designed to work with air output to one of the parties. G, h; Or a particular compact version I. In the boxes are used with electric valves, installed in the closed position with a closed gate. When opening one of the goal sesters, the appropriate air valve automatically opens and the air supply is turned on.
In the absence of free space, especially compact veins with a vertical box J or horizontal - K, L. Air-thermal curtains with a steam heat exchanger have significantly fewer layout options due to a certain orientation of the carrier and cannot have a vertical position of the power unit.

Specifications

Table 3. Approximate parameters Curtain with one air discharge box

The table indicates the actual performance by air of the power unit, taking into account losses in the power unit and the transfer box.

TU 4864-002-52770486-2007

• Airfield curtains of the RPV-Innient are intended for use in conjunction with the fire gate of the 1st type.
• The possibility of applying a curtain for other sanitation and technical purposes is determined by the project organization of the customer.
• Fire resistance limit, no more - EI 60 (operation at ambient temperature no more than 350 ° C, not less than 60 minutes).

Operating conditions

• The curtains are intended for the 2nd category of placement according to GOST 15150T90 in conditions of moderate (y) and tropical (T).
• The maximum calculated temperature of the environment surrounding the veil, not more than 350 ° C.
• In the air supplied in the curtain, the presence of inclusions, aggressive with respect to the steel of ordinary quality, explosive mixtures, sticky, fibrous and abrasive substances, with dusting of no more than 100 mg / m3.
• The curtain works on the outer air (the air fence from the street is from mines, air ducts, etc.) Air supply to the curtain should be carried out through heat insulated. Air ducts providing air temperature at the fan inlet not higher than +40 ° С (+45 ° C - for tropical execution). The average quadratic value of the vibration of external sources of vibration in the installation places the curtain should not exceed 2 mm / s.
• Further use of the veil who worked in a fire is prohibited.

Device and principle of operation

• Aerial curtain in the basicexecutionit consists of a fan and dispensing box. Curtains No. 2 can be completed with removable support brackets. In the remaining curtains, the brackets are part of the fan.
• The electric motor included in the fan is connected directly without a terminal box. To connect the engine to the network, use a heat-resistant cable. The cable is not included, but can be put on request with the length of the length.
• The airproof box should be placed horizontally above the gate from the car storage room. The air-discharge box is attached to the fan without a flexible insert and delivers air into the gate zone in parallel to their plane, protecting the entire width of the opening.
• Curtains with a length of the air dispenser box up to 4 m are supplied in the assembled form (the fan and all the elements of the air dispensing box are interconnected). With the length of the air discharge box more than 4 m, the curtain comes with two or more assembly units that have the appropriate marking.
• In accordance with the requirements of the MHSN 5.01-01, the core provides the rate of expiration of air jets from the air-discordant box at least 10 m / s with the initial thickness of the jet at least 0.03 m and the width of the jet of no less protected width.
• The curtain turns on the fire alarm signal.

Products and services offered by the Company:

Ventilation equipment: Fans Channel units, Radial Radia, Roof Fileway; Ship, ship and special fans VRS, VS, RCC, VRSS; air actuate installations APK-Innient (central air conditioners); Air-thermal curtains TZK-Innient; airproof curtains of the RFZ-Innient; Air-heating units Uniterm and others.

Provided by the company Products and services:

Electric motors AIR, AIM

Organization OOO "Innient" 7720249361 Registered at the Legal Area 111394, Moscow City, Martenovskaya Street, House 38, Building 1, Floor 2 Room 1. Heads Director General of Savchenko Larisa Viktorovna. In accordance with the registration documents, the main type of activity is trading wholesale of other machines and equipment. The company was commissioned 19.11.2002. Organizations issued by the All-Russian State Registration Service - 1027739576985. The full name of the company Limited Liability Company "Innient". For more information, you need to go to the company's card and check the counterparty for fragility.

Interdistrict Inspectorate of the Federal Tax Service No. 46 in Moscow made registration of 19.11.2002 LLC "Innient". Then the procedure for registration in the State Institution was started - the General Directorate of the Pension Fund of the Russian Federation No. 7 in Moscow and the Moscow Region Municipal District Novogireevo G. Moskva, which was subsequently dated from 10/28/2016. Branch No. 15 of the State Institution - the Moscow Regional Office of the Social Insurance Fund of the Russian Federation delivered a company for registration 04.10.2018 00:00:00. The latest entry in the register EGRUL is contained about this company: a change in the information on the legal entity contained in the Unified State Register of Legal Entities.