Whatever style for the arrangement of your garden you chose, a few beautiful arches with curly flowers will be quite by the way. Where is the best place to place the garden arches, what plants for them to choose - tell me in the article. We also prepared for you a selection of photos and several simple step-by-step instructions for independent production of the archer from wood, metal and plastic pipes.

Garden arches refer to lightweight structures consisting of two vertical supports with a horizontal jumper - in the top. In landscape design, they are used as decorative architectural structures, bases for pergola, canopies and as a support for curly colors and deciduous plants. The arch arch can not only be a traditional arcuate, but also triangular, rectangular, trapezoidal, fit, asymmetric.

By destination distinguish:

• decorative garden arches;
• zonic arches;
• entrance arches;
• arches-Sheds;
• arches-pergola;
• arches-support for curly plants.

According to the design features, garden arches are:

• single;
• double;
• arcade;
• volumetric.

Depending on the material of the manufacture:

• wooden;
• metal;
• plastic.

Places that can be decorate with original garden arches and arched elements, in the country area abound. Take an exquisite wrought-iron or wooden arch time gate, gate or porch at home. You are in blooming or deciduous curling plants, it will always look smart and hospitably.

Arrange luxury arches with bright and fragrant curly plants in the garden area or the fountain.

Make a shady arched canopy with a comfortable bench and "alive" walls in the patio area or use arches with grilles as barriers to the courtyard, mangal.

Create a stylish arcade (tunnel from several identical arches) along the central garden track or alleys.

Decorate with cozy and stylish arched crops with colors for the roof and walls of an open terrace or arbor for family trapez, reception of guests and relaxation.

Other applications Arch in Garden design:

• make an improvised arch-entrance near the artificial lake or from the waterfall;
• install the arched supports series with fragrant flowers along the walls of the country house;
• disguise with vaulted supports with spectacular liana plants unsightly fence;
• use individual arches and compositions of them in the zoning of the garden plot;
• create from several arcs original blooming triad, Altanka or Garden Tent.

Garden decor ideas with stylish arches with curly plants and without them - a lot. You can buy finished arches or to build them yourself from wood, bricks, metal or plastic profile.

Classic arches with round and rectangular arches will give the harmony and the completion of the country's dacha landscapes of regular and landscape styles. Easy openwork forged metal structures emphasize the sophistication and beauty of country areas in the style of Provence.

Arches with elements of pagoda, fueled curious arches, as it is impossible to complement the garden landscapes eastern notes. The arches from the untreated tree and the lattice arched supports will help to decorate gardens in country and ethnic styles. What options are best suitable for your country site - to solve you.

Bench with arch for garden, photo

Forged arches for the garden, photo

Curly flowers for arches in the garden, varieties, photos

Create a beautiful and spectacular flowering arch in the country garden.

• from plenty roses;
• from Clematis;
• from nasturtium;
• from bougainvillia;
• from wisteria;
• from Ipomey;
• from Campxis;
• from Kobei and other curly plants.

Plenty rose

Glicia

Bougainvillea

Clematis

Wooden arches for the garden do it yourself, photo

Wooden arch for the garden do it yourself, master class

Rectangular wooden arch pergola

What to prepare for work:

• wooden bar - cross section 10 x 10 cm, 5 x 4 cm;
• boards - cross section 7 x 4 cm;
• rake - cross section 4 x 2 cm; 4 x 1.5 cm;
• self-tapping screws, anchor screws;
• cuts of asbestos cement pipe - 4 pcs., with a diameter of 15-20 cm, 50 cm long;
• metal bases under support;
• electrolovka or saw;
• screwdriver or screwdriver set;
• grinding paper;
• cement M400;
• small-flower crushed stone;
• sand River;
• waterproof paint or yacht varnish.

How do the arch:

1. Main wooden elements Arch: 10 x 10 cm timber - support poles (4 pcs. 200 cm); from a bar of 5 x 4 cm - transverse beams with curly edges (2 pcs. 180 cm); From the board - longitudinal crossbars (2 pcs. 80 cm), perpendicular crossbars (8 pcs. 120 cm).

2. Prepare segments of wooden rails for lattice Arches: Short - 20 pcs. 80 cm, long - 8 pcs. 150 cm, side - 4 pcs. 150 cm.

3. Talking metal supports to the bottom of the arch columns. If necessary, the timber is customized in size, squeezing the jigsaw.

4. All parts are grinding, treated with moisture resistant and antifungal impregnation, dried. Covered two layers of yacht varnish or waterproof paint and again succumb. If you wish, you can paint the arch after installation.

5. In the ground using a drow or a conventional shovel of 4 holes - with a diameter of 20 cm, a depth of about 35 cm. They should form a rectangle 1.5 x 0.5 m. A mixture of rubble shallow fraction with river sand is moistened, after What are wetted loosely.

6 Set into prepared pit segments of asbestos-cement pipe. Pour the deepening of pipes to the top cement mortar. The surface is smoothed. The work continues in two days, after the complete pouring of the cement.

7. Anchor screws (you can use conventional screws with dowels) to the pipes protruding on the surface of the soil, metal supports for columns of the arch.

8. Fixed wooden poles in supports, also with screws (with nuts). Check periodically quality installation level. If there are no special metal supports for the arches columns, it is possible to strengthen them directly in the ground, after turning the rubberoid. In this case, bars for pillars are made by 15-20 cm longer.

9. Two top transverse beams with figure edges are fixed to the columns. For strength, the arches are recorded with diagonal and horizontal struts. Then the eight top longitudinal crossbars are installed.

10. From wooden rails on the sides of the finished arch make a decorative square lattice for curly plants.

Welded Arches for Garden, Photo

Metal arch for the garden do it yourself, step by step with a photo

Metal garden arch with a round arch

What to prepare for work:

• metal profile (25 x 25 or 30 x 30 mm);
• steel rods (cross section ≈ 30 x 30 mm, 30 cm long);
• mechanical or automatic pipe bender;
• disk saw for metal or a grinder;
• welding machine;
• gravel shallow fraction;
• sand River;
• cement M400-500;
• small sandpaper.

How do metal garden arch:

1. Metal profile is cleaned of contamination, grind out sandpaper, degrease.

2. From the processed profile, it is manufactured: 8-12 sections of 45 cm long (crossbar arches), 2 segments of 6.3 m long (arc arches).

3. On each side, 1 meter is measured on both arcs. Make marks. With the help of pipe-bend, without affecting the marked areas of the profile edges, two semicircular arches frame are made.

4. To one of the metal arcs at equal gaps perpendicularly welded all side crossbars. Then, this frame arch with crossbars turn over, after which they are joined with the second and also gently weld. You can use ready-made wrought elements as an additional decor.

5. By completion of work to the ends of both arcs of the finished Arch reliably weld steel rods.

6. Measure the distance between the rods-supports. In the ground for their installation there are four holes, a depth of 45 cm, a width - about 10-15 cm. Fill them with 15 cm sand with rubble, moisturizes, tamper. Install the arch, previously wrapped the rods runneroid. Pour holes in the ground with cement mortar. Check the quality of the installation of the arch level. Fix the supports until the cement is frozen.

Light dacha arch of plastic pipes

What to prepare for work:

• plastic pipe, cross section 20 mm;
• construction knife or hacksaw;
• plastic fittings;
• soldering iron with a nozzle "Iron".

How to make a plastic garden arch:

1. From plastic pipes (most convenient in operation and durable polypropylene) cut the elements of the arch. For the simplest single design, it is necessary: \u200b\u200b2 segments for supports 1.6 m and 1 segment for a horizontal jumper, 1.5 m long. For the arch with a arc-arc altitude, a jumper is required; 2.4 m.

2. Prepared plastic parts, alternately heating on the "iron", tightly connected by fittings. You can additionally fix the places of the arch of the arches by any quick-conchion glue.

3. The finished arch of plastic pipes is plugged into the ground, they are good tamper. If desired, it is possible to strengthen the supports of the cement, however, considering the ease of construction, this is not necessary.

Video: Light garden arches for flowers

Who at least once did not admire this decorative garden decoration? Or did not recall the rest on the bench under the arch, served clematis or plenty roses? But didn't this arched design left someone indifferent to someone, drowning in a green waterfall of wild grape branches, frightened cheeks from blooming annual bempsions and petunitions? All this beauty of the decorated area of \u200b\u200bthe site gives one of the most expressive elements of landscape design - garden arch. And the beauty, created by their own hands, pleases doubly.

How to make a garden arch yourself without resorting to help professionals to emphasize and decorate the recreation area - patio or garden? To cope with this task, building a "blooming corridor" and decides with it by plants, under the power of any dacket or an amateur gardener.

Span plus support

Garden arch - vaulted design, consists of vertical racks (supports) with a arcuate or direct compound from above. It has a symmetric relative to the vertical axis shape and pass-through opening "Gate" or repeating sections. Refers to small landscape forms. It has a variety of stylistic performance.

By material manufacturing, garden arches are:

• Wooden - paving, boardy, solar, wicker or combined.
• Metal - from pipes, bar, profile, metal portable trellis, including wrought-iron arches.
• Plastic - from pipes, collapsible, sectional or lattice.
• Stone - brick, buildings from natural stone on the foundation.

Light wooden structures

Wooden arches have a presentable "classic" view, it is easy to paint and easy to manufacture. They are the most common type of arches with an acceptable price / quality ratio. The sawn timber is selected dry. The best drying is natural, for three years under a canopy. For the manufacture of the arch with the length of the corridor, 3 m will be needed 6 bars (3 on each side). The cross section is a rectangular 75 × 75 mm or 100 × 100 mm, the height is 2.0-2.2 m. From one end to the length of the shock, the bars are impregnated with an antiseptic (can be used by car oil, diesel fuel). If columns are used as supports, a proven method is used - Kolley logs are burned in the fire.

A garde rail or shovel is made by pits after 1.5 m in depth of 0.5-0.6 m. The bars are installed in the pits, poured soil, mixed with crushed stone, brick and tamper. The verticality of the installation is checked by a building level or plumb. The most reliable method of installation is concreting. However, it is the opinion that concrete "attracts" moisture, from which the tree quickly comes into disrepair. Therefore, a solid fill should be preferred by three-layer fill - the cement screed layers should be alternate with layers of dense soil.

Of the 6-7 harvested racks of an arbitrary section 4 are attached horizontally between bars - fill emptiness. Two-three rails will go at the end of the assembly on the connection of three arcs of the chord overlap. The semicircular arcs themselves are made of wooden bars (boards) on a cardboard pattern, repeating the profile of the future overlap from the chain of the N-th number of fragments-parts having a rounded form.

Each length is usually 40-80 cm and depends on the radius of the future arch and the width of the sawn timber used. A cardboard pattern is superimposed on the wooden workpiece, the contour of the fragment and the part is cut out with an electrollized or manual milling. The final assembly is made on a cardboard template - the first layer of cut fragments is stacked. Then, with a shift in half atetal, the second layer is placed on it. Both layers are combined with self-draws, and finished arcs are installed and attached on the upper parts of the supports.

Note! The lack of wooden arches is a relatively short life and low stability of the design.

Durable and durable

Metal structures are durable and durable, if you follow them. Full painting is produced once every 3-4 years. Tints in places of rust - annually. For the manufacture of the garden arch, two metallic rods L \u003d 6 m and Ø 10 mm are taken. The soil is prepared by the template of the future opening - outlines the paint contour, and the metal pins l \u003d 20-30 cm are driven along it. The pins are enveloped to give them the finished shape of the Arch - this is the coax of a future design. The legs of the curved reinforcement are plugged into the ground to a depth of 45-50 cm, the dumped pits are poured with concrete solution. Rings are formed from the rods of the meter length on the pipe bender - the space aggregates between arcs and fasten them on the rigine soft wire.

In the absence of this bending tool, the space is filled with cross-direct metal rods. The finished design is covered with an anti-corrosion coating - a layer of primer and stain with enamel.

Ease and high performance characteristics

It is precisely such qualities that plastic arches possess - a modern type of landscape designs. They are manufactured independently, plastic pipes of round or rectangular sections are used as a frame material - most often used water Ø 20 mm. The best material is considered high-quality PVC - it will better tolerate high and low temperatures, so such structures are not removed by the owners for the winter in the utility room. An alternative to manufacturing is to buy ready-made designs of a variety of style - they are easily going, and the installation does not require special skills.

Note! The disadvantage of plastic structures is a limited choice of color gamut - in most cases they are white. However, the problem is easily solved by applying coloring on the surface of the garden arch. A wide selection of polyurethane paints and acrylic enamels designed specifically for plastic and PVC are produced. With their help, you can easily change the color of the arch.

Multisective

The sequence of light arches connected by beams in the shape of a canopy is called pergola (from the Italian name Pergula - canopy, an extension). At the location can be independent, separately standing, or stuck in one end to the wall of the room with facilities. Often pergolas begin on the input room of the room or terrace and serve to protect people living from the scorching rays of the sun, including barbecue places, swimming pool or hozpostroop. Pergola with a bench can perform the functions of the local recreation area. Replaces the gazebo, having a simple manufacturing technology with ordinary arches.

Popular in the southern regions, the cultivation of vineyards is accompanied by creating favorable conditions for crop growing. Grapevarians build special supports for growing vines that support them. Viticulture has spread widely in all regions where decorative plants are growing.

Spectacularly combining the decorative function, the garden interior fits the arch for grapes. Unlike the simple cultivation of grapes on the trellis (specialized stands for maintaining plants during fruiting), the grape arch creates a pleasant sultry day shading, both for people and for growing plants nearby.

Before the start of the construction of the arch should decide on the grown variety and carefully select the installation location.

Options for designs Arki.

The choice of space for the arch directly depends on the dimensions of the design. The structure of the structure is usually chosen by 1 meter above human growth. In this case, the appearance of the site should be harmonious. The arch can be installed on the road from the site, when approaching the house or along the tracks, you can also create a canopy above the gazebo.

The choice of material is based on further structural functions. If it is planned to grow decorative grapes, lightweight materials, type of plastic can be used. If, in order to grow varietal grapes, plastic floors are unsuitable, they will bend under the weight of ripening clouds. In this case, attention should be paid to wooden or metal supports.

Arch for grapes

Wooden bars should be used when choosing a variety of grapes bringing every season abundant harvest. The construction of the design of the tree refers to one of the most simple ways. No special skills are required to work with wood. Also, the tree has a more attractive view, organically looking at the garden plot.

Important! All wooden materials should be treated with a mourn and moisture-resistant varnish before construction.

To give greater stability, arched supports should be tamped in a rejection of at least 60 cm deep, wrapped with a rubberoid to prevent rotting.

Plastic pipes differ in low weight, are not subjected to rotting and corrosion, durable and durable. An important factors are the low cost and ease of such pipes. However, therefore, they can be saved under the high weight of fruit-based vines. To create the arch, the optimal use of the tap pipe, with a diameter of 20 mm. When building a design of plastic pipes, you can do without special equipment such as a welding machine using glue as a fastener material. Such quality makes the material attractive for beginners.

It is interesting to look at the dacha arches, which are made of plastic bottles inserted into each other. Such archs are used exclusively in decorative purposes or, creating shading, since their strength is small.

Plastic bottles

The use of metal profile pipes with anti-corrosion coating and reinforcement has several advantages. This is high strength, stability, reliability and durability. When the arch is erected, such materials should be carefully prepared tools. To fasten parts, you will need either a welding machine or fastening bolts inserting in advance drilled holes. A tangible moment is the high cost of consumables.

Attention! Metal products are characterized by a lot of weight, in connection with this, it should not be further weighted with the design of the extension elements.

Guide for beginners

Creating an arche for grapes with your own hands is a creative and interesting process.

Regardless of the choice of material for building a grape arch, the first step to its creation will be a competent drawing up drawing. With self-preparation, you can get an absolutely unique appearance of the product. You need to accurately measure the place to install, calculate the required amount of materials. You can also use ready-made drawings, in this case the originality of speech does not go. After drawing up and approving the construction plan, you can start assembling.

Note! Before work, regardless of the selected materials, they should be prepared. Wooden bars to handle the verse and covered with varnish. Metal pipes and profiles to be treated with an anti-corrosion agent.

Having placed the territory, dig a pummy depth:

• for wooden beams - 100-120 cm, with a diameter of 7-10 cm more than a pillar;
• for metal pipes - 80 cm, with a diameter of 60 cm;
• for plastic pipes - 40-50 cm.

Fill on the bottom of the gravel layer 10-15 cm thick, after which it is good to raise it.

• For wooden pillars - to handle the bottom with solidol, tightly slaughtered with a rubberoid of 1-2 layers;
• For plastic pipes - in the cavity to fall asleep sand to impart stability and intersect the end of the plug.

Place the support poles strictly in the center of the formwork and fall asleep with rubble. After that, pour the liquid concrete solution capable of leaving between individual pebbles.

At the same time, it is necessary to make sure in the right level of all columns. It is necessary to correct the uneven installation of bars by knocking the peg, creating stretch. When skewing the frame to make additional stops and insert wedges.

Important information! To create a more reliable base, you can raise the level of fill over the soil. For this formwork should be reinforced with steel wire or grid.

Leave pipes for 3-4 days to better harden concrete.

After this period, you can begin to build the top of the arches and carry out wire threads. Basically, the top is used to grow a grape vine. In this case, the framework is originally created, connected to already ready-made supports that serves as the final stage of the column mounting. At the same time, it is important to check the level of the columns to avoid skewing the entire structure.

When using metal pipes, it is necessary to gradually weld the elements of the upper part, as their weight is very high for a single uplift. You can also use fastening bolts in places.

Metal pipes

In the case of working with plastic pipes, adapters are used in the connection places. Connection locations must be carefully defentioned, warm up on a special nozzle of the welding machine and insert into the adapter.

Attention! It is impossible to carry out fastening manipulations until the full cooling of the pipes.

Also in places of docking can be used special glue. In this case, the pipe and the adapter or the tee are applied with a layer of glue, and two elements are connected in the desired position. To create bends of the plastic pipe, initially follows the estimated place to fill with sand. This will help create more smooth transitions when melting the pipe with a special burner.

After the preparation of the construction framework, you can install additional items. The resulting frame can be seen to create shelter from rain. Polycarbonate materials or slate are well suited for this. You can also decorate the finished arch design elements, establish additional strips for the grape vines.

Regardless of the selection of the material (except for plastic pipes), the arch of the arch requires timely care. It is required to remove dirt and dust, to process with antiseptic drugs to avoid the appearance of mold and fungus, cover with paint and varnishes, depending on the material used.

Summing up, we can say that the construction of the grape arch is not a technically complex process. Its creation can be carried out in a short time, without resorting to the help of specialists. The extensive choice of materials will allow the arch in any interior of the plot by creating a unique composition.

With the skill and rich imagination, interesting and useful things can be made from any girlfriend, including plastic pipes.

Plastic pipes of different diameters are sold in any construction store at quite affordable prices. They are used in the device of water supply, sewage, heating, watering system, and after construction or repair, unnecessary trimming often clog the site, while they can serve as excellent material for creative crafts.

Do not hurry to export a construction garbage on the landfill - we will tell you what can be made from a plastic pipe to turn extra residues into beautiful and functional interior items.

What is good plastic pipe?

We will not talk about the direct appointment of the product, but about the convenience of using varieties of plastic pipes as material for crafts. Plastic pipes have light weight, durable and rather durable. They are resistant to pollution, do not collect dust and easily wash. Products made of plastic pipes are safe when exploiting even small children (do not fight, do not have heavy weight, do not emit toxins).

For creative works, PVC pipes are often used, which are quite rigid and easily connected by special nozzles and "adapters", allowing you to obtain collapsible structures. Polypropylene pipes can also be used, but for their compound, a special welding machine or compression fittings will be required, and the finished products will not disassemble.

Methods for connecting pipes in structures

From plastic pipes, not only comfortable household trivia can be made, but also furniture items. In order for such a self-made product for a long time and was securely in operation, it is necessary to take care of the correct connection of individual segments. Since the connection of polypropylene pipes has already been said, consider the dock only PVC pipes.

PVC plastic pipes can be connected in the following ways:

• in a rubber seal;
• with the help of adhesive composition;
• bolts, drump out hole.

The first method of compound is characterized by simplicity, but insufficient rigidity. Before the connection, it is recommended to clear the inner and outer surfaces of the pipes on the junction of dust particles and process the inserted part of the pipe with silicone lubricant. First, the pipe is inserted into the socket until it stops, after which it is carefully nominated by 0.7 - 1 cm. Collected in this way of construction in the future can be dismantled, which is convenient for seasonal products.

The second way of assembling pipes is distinguished by reliable fixation and greater labor intensity. Works on the connection of parts begin with the processing of the docking surfaces of the terminal and the tubes with emery paper for better clutch. Then they must be deguted with methylene chloride. The adhesive composition is applied along the entire length of the prepared outer surface of the pipe and 2/3 of the length of the inner surface of the termination. In the completion, the pipe is inserted into the socket until it stops and rotate the quarter of the turn. For gluing it is required to press the details for 1 minute. For a good fixation, all operations on the connection of two segments should be carried out quite quickly. The connected elements are left for several hours until the adhesive composition is completely drying.

The third way more time-consuming, as it requires markup and preparation of holes, but allows you to obtain collapsible structures with a reliable connection.

For angular junctions and connecting several segments at once in one node, it is convenient to use a variety of fittings. Plastic pipe structures can be any complexity using numerous tees and fittings. Consider useful homemakes in order of increasing the complexity of execution.

Original and functional trifles for interior decoration

Our review of interesting ideas opens the simplest products from a plastic pipe, to make that even novice masters of self-made art. In addition, for such crafts, the minimum amount of material will be required, and in some cases it will be possible to put even the shortest trimming.

From trimming of large and medium-sized diameter pipes, a convenient and practical organizer for the working office or workshop can be made.

Here are two versions:

• fastening with screws to the wall or table, for which one end of the cut cut at an angle is a stationary version;
• bonding segments between themselves with the formation of a stable figure - a portable option.

Segments can be left white or gray, but you can paint into your favorite color. Such an organizer is indispensable for schoolchildren and people engaged in creativity and needlework. With him everything will always be at hand, and on the table - the perfect order.

Additional comfort on the desktop will provide a tablet for drawing and stand for a laptop, which can be made from polypropylene pipes of small diameter.

Book shelves are a special element of the interior. Their presence in a certain way characterizes the owner of housing. The angular shelf in the style of Hi-Tech will not be ignored.

From numerous short trimming of different diameters, you can make a patterned frame for a mirror or photography. It is enough to glue the sliced \u200b\u200brings according to a predetermined layout that can be applied to a sheet of cardboard. It can be floral patterns or something abstract. Frame size will depend on the number of suitable material.

Cutting a large diameter can be used to create a comfortable shoe shelf with numerous cell compartments. Such a design will not take much space in the corridor and will ensure the storage of the shoes properly and quick search for the desired pair. The connection of the elements is carried out with the help of glue or self-tapping screws. To fix the shelf on the wall, you can use a plywood sheet to which you first glue the collected shelf.

Some crafts from PVC pipes will love to lovers of living colors. The reliable stand for colors is easy to perform and looks pretty.

For the manufacture of flower pots under the transplantation or reproduction of indoor pets, small trimming of sewer pipes are well suited. Showing the fantasy such pots can be decorated with colored paper, paint or bright stickers.

Of the elongated medium diameter cylinders, it is easy to make a stylish vase for artificial colors and dried flowers. If you approach creatively to the embodiment of this idea, then an original gift for a significant event can get out.

Another extraordinary idea for the interior is homemade techno lamps. There are a lot of performance options, but they all adhere to the principle of minimalism: no extra details.

With the help of the assigning unused, you can also make useful things in the hallway or corridor: a hanger for clothes and bags and a trash bag holder.

Crafts from plastic pipes for the playground

From PVC pipes, you can make a lot of crafts for children's entertainment in the yard: a developing rug, a playpen, swing, sleds, a football gate, a gaming house, an outdoor shower and theatrical shirma.

Very useful for kids design - Manege from PVC pipes.

Children will be delighted with light swings that instantly dried after warm summer rain.

In winter walks, homemade sledges will be the most reliable and fast. The design is quite complicated, but using practical videos you can figure it out.

For active games in the courtyard from the remains of plastic pipes, you can make a safe football gate.

Many children often dream of their castle in miniature. The embodiment of children's dreams are quite simple and not at all expensive. The frame is done very quickly. It will be left to choose a beautiful dense matter for roofs and walls, and the house is ready!

Refreshing in a hot summer day will help the next facility. Such an open shower will be in joy not only to children, but also adults.

From polypropylene pipes you can make theatrical screen. It is enough to collect 3 frames, combine them between themselves and close beautifully decorated curtains. The home theater develops the creative abilities of children and creates good conditions for an exciting pastime.

We update the interior economically: plastic pipe furniture

Crafts from plastic pipes with their own hands can occupy a key place in the interior. Folk craftsmen are divided by many extraordinary solutions, allowing to significantly save a family budget. Light the brightest of them.

The most common and demanded object of furniture is a chair. Using segments of plastic pipes and connecting elements, you can make high-quality chairs of different types: children's, folding for hiking and fishing, armchairs and even chairs for feeding.

Slightly having mastered the equipment of the assembly, you can proceed to more complex designs. A neat bunk crib from polypropylene pipes is a good alternative for a country house or giving, when buying a finished bed is too expensive. Moreover, when the kids are growing, the material can be put on the manufacture of other useful crafts.

A glass coffee table with a base of PVC pipes on the next photo is difficult to call the amateur homemade, because it looks like design work.

Another original idea is a rack for an entrance hall or living room. By independently constructing the rack with the desired amount of the shelves of the required size, you can not spend time on shopping in search of something suitable.

Useful crafts for country houses and cottages

Unused and excess building materials must be used in the country area. Crafts from plastic pipes for cottages will noticeably facilitate garden work, make rest more comfortable and help to avoid large material costs. At the same time, the structures look neat and stylish.

Of small segments and several tees, a pretty dryer for linen and towels can be obtained. It is easily clean and is not subject to corrosion.

Rest at the pool or in the garden shadow it is impossible to imagine without a lounger. The photo shows a chaise longue that is fully consisting of plastic pipes, but you can combine with dense matter.

A carport for a car is another useful use of PVC pipes. He will protect the transport not only from the rain, but also from the scorching summer sun.

For the garden decor, a garden arch is often used, which can also be made of plastic pipes. A new element appears in its design - bent arcs. Bend pipes for the arched arch can be heated with gas burner or boiling water. You can also wear a pipe on a metal rod and, stuck one end to the soil, arcuately bend. This method requires certain physical efforts.

A simple and lightweight gazebo will decorate the garden and protect from the sun and fine rain. For the presented version, it is sufficient to fasten the water-winding tissue on the pipes and bend them on the reinforcement rods. In order for the design to be reliable, you need to take care of the good fixation of the rods in the soil.

The spectrum of the use of plastic pipes is truly huge and limited only by your fantasy and needs. We need a small woodwood, gate, trolley or rod stand - take the required amount of pipe and embody your idea to life.

From sewer pipes it is easy to make a comfortable feeder for chickens. It is very convenient to plunge the grain, without going into the pen. Kuras cannot be rapped in such feeders grain that saves food.

A small greenhouse in the country area can also be made of plastic pipes. The easiest option: make a rectangular frame and cover it with a film or agrofrix.

A more serious construction is a seasonal greenhouse - will require more time and material. Connect the elements is better than bolts to make it possible to disassemble the design for the winter period. The optimal shape of the greenhouse is arched. To create it, the ends of the pipes are dressed on half-meter metal rods, driven by the sides of the future greenhouse through each meter. The size of the greenhouse depends on the planned use. The greenhouse can be installed on the foundation or ground. A film, polycarbonate or agrovolok can be used as a passing material.

Plastic sewer pipes can also become a container for growing flowers, greenery and vegetables. Very often used to create vertical gardens.

For the fencing of the site, you can use a low fence of plastic pipes, which is distinguished by durability and minimal care requirements (it is not necessary to paint annually).

The use of plastic pipes is not limited to the ideas presented. This material is so universal and easy to assemble (easily cuts, snacks, has a variety of connecting details), which is simply impossible to ignore it in his domestic workshop.

The selection of the material depends on the place and conditions for placing the structure for grapes. From what place is in the distance from home, and what functionality you want to give her. After all, it can be accommodated for growing a varietal grapes, which will give the arch function of the vineyard, and for growing decorative grapes, which gives it and, according to the entire summer cottage, an exceptionally aesthetic appearance with the shading function.

Arch under grapes should be installed on a well-lit place

From the choice of place for the arch depend on its size. But under any circumstances, the height of the arch should be at least one meter above the average human growth. And do not disturb the general composition of the site, the center of which is a house. The arch should not be too high if it is located near the house. If the purpose of building the arch is the creation of a shade for the house, then a half-year, fixed with one side to the wall or roof of the house, is suitable for this. In everything else, it is necessary to proceed from the feasibility of applying the arch for one or another place, guided by the appropriate considerations.

Arch can be done:

• from wooden bars and planks;
• from plastic pipes;
• from metal rods and metal pipes;
• from metal structures, subject to the use of the welding machine.

From ordinary wood you can make original arches for grapes

It is from the selection of a plot for the arch under grapes will depend on its dimensions. The height of the design should be 1 m above the average human growth. And also it should not disturb the general view of the entire site at the cottage. No need to make the arch is very high if it is concentrated near the house.

If the design of the structure implies the shading of the house, then for these purposes a half-year comes. It will be fixed with one side to the roof of the building. The choice of other parameters for the arch installed in a particular place is carried out in accordance with your own wishes.

To make the army on the vineyard, you can use metal, wood and plastic. Each of the materials presented has its own performance.

Each gardener knows what amazing taste is grapes. But grapes are not only borders of juicy and fragrant berries, but also an excellent version of the decorative decoration of the subsidence. The vine of this fruit culture is widely used for designing fences, walls of houses, arbors, columns and, of course, arches.

Grapes on the arch gives the garden plot a special charm. In addition to aesthetic attractiveness, the arches under the grapes serve as a kind of recreation area. Here you can grow plants that are afraid of direct sunlight, or arrange a small platform for recreation.

Before you begin the choice of materials and arrangement of the frame, you need to designate the place where the arch for grapes will be installed, made with your own hands. The size of the future design depends on the target. So, if you plan to sharpen the house using this architectural form of the landscape design, then it is better to give preference to a half and one side of which is fixed to the roof of the building.

According to specialists in the field of landscape design of household plots, the height of the structure must be 1 m above the growth of a person.

When choosing a place and thinking of the design of the future composition, it is necessary to adhere to the harmoniousness and unity of style with the rest of the terrain. The frame for grapes should be organically fit into the composition of the nuclear area.

Wooden bars

After assembling the arches, wooden bars need to be treated with an antiseptic, coat with a mourn and moisture-resistant varnish. A wooden base that will contact with the Earth requires additional attention. According to the recommendations of experienced gardeners, in order to avoid rotting wood, the bars arches must be tightly wrapped with rubberoid and secure it with wire.

Plastic pipes

Arch for grapes from plastic pipes is very popular among gardeners. This design is characterized by ease and strength of the material, and is also not subjected to rotting and corrosion.

So that in the process of assembling the design did not arise problems in the joints of the joints, all pipes must be one diameter. It is recommended to thoroughly think over and make a drawing of the planned structure. In the deepening of the arch in the ground, the base tubes should be strengthened and concrete.

However, it is necessary to say about the disadvantages of this material: the design of plastic pipes is not suitable for growing high-yielding grape varieties, since the arc under the severity of the bunch of the Arch will begin to deform.

Many gardeners are asked if it is possible to make an army under the vine from the rods of reinforcement and metal pipes with an anti-corrosion coating. The arch for the grape metal has a lot of advantages, among which it is worth noting the strength, reliability, high wear resistance and stability of the design.

So that the arches under the grapes made of metal made by their own hands served many years, you need to carefully consider the drawing of the carcass. To work, you will need a welding machine or bolts that are inserted into the holes drilled in metal pipes.

Please note that such designs do not differ ease. For this reason, try not to complicate the arch with superfluous elements and carefully work over the bulk of the framework of the frame.

If you want to make an arch under grapes, which will not have one decade, it is better to give preference to the collected metal structures. For the construction of a metal frame from metal without a welding machine. During the work, metal pipes of various lengths, chawliers, fine bars, from which it turns out to be issued the original top in the form of lamps, lamps or flower vases.