The zoning of the space of residential or office premises is the most functional and common use of such doors. After all, they are suitable for rooms of any square, even the most small. You can choose and cheap to buy a door-compartment to separate

• balconies and loggias
• terraces and veranda
• kitchens and living rooms,
• kitchen and canteens,
• cabinets and living rooms,
• sliding doors for a wardrobe,
• speeds, storage rooms, technical premises.

They are appropriate and comfortable almost everywhere where you need to save space.

Benefits

The popularity of the doors-coupe in Moscow is constantly growing, as people managed to appreciate their indisputable advantages:

• suitable for all types and styles of planning,
• possibly ,
• being properly selected, combine functionality and aesthetics,
• the price of the door-coupe does not exceed the cost of other structures,
• installation requires a minimum of effort and time, almost without affecting the existing interior,
• their safety is higher than that of ordinary swing doors.

Trust manufacturing such a responsible detail of your interior cost only to professionals, the practical experience of which will allow to implement all your ideas and wishes.

You can order the door-coupe cheaply in Rial-Moscow. The level of quality always remains at an altitude due to the professionalism and skill of our employees.

To learn the advanced cost of the door for a wardrobe or opening, you can send the desired dimensions to our email or feedback form, order a callback or call the measurer.

Delivery

* Depends on the number of doors in order and remoteness from production. Calculated individually with the manager. Pickup is possible from a warehouse in Schelkovo and in Reutov as a profile and doors.

** Delivery of the profile Wholesale customers is free of 30,000 rubles, in other cases by agreement based on the distance of logistics and the cost of the order.

*** Measurement removal (free).

Ways of payment

• Payment on account (for legal entities)
  When concluding an agreement on a legal entity - you will be invoiced, usually after payment we see the receipt of money during the day.
• Cash
  We accept payment in cash both in the office of the company and at the address, when concluding the contract. Upon receipt of money, the company's employee will provide you with all the necessary documents confirming payment.
• Visa / Mastercard.
  Exit employees of the company are equipped with mobile terminals, so make payment when concluding an order at your home you can convenient for you.

The wardrobe is convenient, as the doors in the open state do not occupy a lot of space. It can generally be done ample - in niche, from the wall to the wall. All that in this case is needed - install doors for a wardrobe, and then collect filling (or vice versa, it is not so important.

If we talk about hard restrictions on the size of the doors for a wardrobe, then they are not. You can make any length and width. But there are recommended parameters defined on the basis of operating experience:

Design of sash

The cabinet door sash consists of profiles:

All this together has such a species as in the photo. In this frame, in the grooves, the material for doors you selected are inserted. It can be glass, mirror, and other materials.

Separation profiles are not mandatory. They are needed if the sash collects from different materials or they simply like you in this form. The maximum thickness of the filling material is 10 mm, the minimum is 4 mm. Thinner - glass, plastic, mirror - inserted through the sealing gasket.

In order for the sash to be able to move, it is installed on it rollers up and down. The lower rollers account for all the mass of the door, and the upper rollers stabilize the position of the web vertically, without letting it deviate.

Rollers are attached to side profiles using special fastening elements.

Coupe guides

As you understand, the sash is not all. We need guides for which these same doors will move. Their two are upper and lower. In appearance, they differ significantly.

When installing the door, you first hardened in the upper guide, raise the sash until you stop and put the lower rollers in the corresponding socket. The whole design is depicted in the following photo.

Calculation of sizes

When self-assembling doors for the cabinet compartment there are two options for action. The first is to measure the opening, think about how many doors you want to have and with this information contact the firm for the manufacture of doors. Just make sure they sell components without payment for the assembly. The manager himself will consider you all the necessary materials, will give the size and voiced the amount. Everything is simple. But you will have to buy everything in this office, i.e. choose what is.

Sash

Calculate the width of the flaps so that only one handle was visible in the closed state, but it should not close the door web itself. For the door-coupe of two sash, you think this: Measure the width of the opening, add a profile width and share in half. This will be the width of the sash.

For example, the opening of 1600 mm, the width of the profile handle 26 mm. We get 1600 mm + 23 mm / 2 \u003d 811.5 mm. Please note that the profile-handle width is taken arbitrarily. It can be different in shape and, naturally, in width. When calculating, substitute the width of the design you selected.

To calculate the three-skate, it will be necessary to add a double width of the profile and divided by 3.

Example: opening 2100 mm, the width of the handle is the same - 26 mm. We consider: 2100 mm + 2 * 26 mm / 3 \u003d 717 mm.

With a height, everything is easier. 40-45 mm take away from the height of the cabinet and they receive a desired height of the sash, as well as the length of the side profiles. With the size of the sash all.

Filling

Since the filling is in the frame from profiles, from the overall width of the sash, we take a double profile width. The same is done with a height - take the height of the lower and top profile.

So, the width of our sash is 811.5 mm. Measured handle profile width - 18 mm. Since the knobs put on both sides, we double this figure. We get 36 mm. Total filling width is 811.5 mm - 36 mm \u003d 775.5 mm.

Also we also believe: let the initial 2350 mm, the width of the upper profile 12 mm, the lower - 48 mm. Total filling height is 2350 mm - 12 mm - 48 mm \u003d 2290 mm. This is if the filling is solid and it is LDSP, which does not require a silicone seal. If the sash is a solid mirror or glass, from the found height you need to take another thickness of the sealing gum. It is 1 mm, but since it is worn around the perimeter, Tov general-using the top and reduces 2 mm. In this case, the filling height is 2290 mm - 2 mm \u003d 2288 mm.

If the filling of the sash consists of fragments, the thickness of the connecting profile is also subtracted. It also amounts to about 1 mm.

Profiles

The height of the vertical profiles of the frame is equal to the overall height of the sash. The width of all horizontal is calculated depending on the width of the handle: from the width of the sash, we take a double handle width (two).

Let the width of the handle of 26 mm. We obtain the width of the vertical profiles: 811.5 mm - 26 mm * 2 \u003d 759.2 mm.

Photo report about the assembly

First, all profiles are cut exactly according to the calculated dimensions. Accuracy should be perfect. Cut - strictly perpendicular, at 90 °. In profiles, the knobs are drilled by the holes for the installation of rollers and fasteners.

Holes make through two diameters. The exact size depends on the dimensions of the purchased fastener, but mostly sizes are two: 4 mm and 6 mm, as well as 6 mm and 10 mm.

At the top there is one such hole, the center of which is located at a distance of 7 mm from the edge of the profile, at the bottom of the holes two - the first at a distance of 7 mm from the edge, the second - retreating from the profile cuts of 42 mm.

When assembly, all parts of the filling are collected first. At first, if there is a glass or mirror, the sealing rubber is installed around the perimeter. She just puts his finger to put on the end of the detail. At the edges, the seal is cut, they put on the back, but without the adoption of the next direction.

On the mirrors on the back side glue the protective film. You can use conventional self-keys. This film will not give the fragments to crumble, if the mirror breaks down.

If the sash is composite, we collect it with the help of connecting profiles. Filling parts are simply inserted with an effort into profile. Sometimes there may be considerable effort. You can face the end of the palm to the back of the palm or use a rubber image for this.

Simply insert a part of the filling part in the profile and fasten the end

When the sash is assembled, on the same principle, the corresponding profile is installed at the bottom.

Then the time of installing side profiles-handles occurs. All the same way: drive the filling in the groove, follow the way to stop along the entire length without distortion. When the frame is collected, you need to pull it with fasteners. We start at the top. Take fasteners, insert the hole in the previously drilled. If the distance was measured exactly, the screw enters the groove of the upper cross.

Tighten the connection with the hex key. I do not touch the top rollers between the head of the screw and the jumper profile, then we reach the top rollers, then reach the screw.

The same operation repeat on the other side. Then go down. Here fasteners are installed in the upper hole. Just tighten until you stop. Similarly, repeat on the other side.

Installing the lower roller - Plate Turn in profile

Spring we press, fueling the casing of the roller inside. Insert the screw into the hole, trying to get into the nest, tighten the hexagon. It may need another size - a little less than the rest - since this screw is usually thinner and longer.

You do not need to delay it until you stop. So that I went into the plate on a half-meter or so. Then, when installing the door and adjust its stroke, this screw adjusts the position of the sash - the angle is raised or lowered.

If you press the roller wheel, it will go to the housing, then return due to the elasticity of the spring. This simple mechanism ensures the smoothness of the door to the cabinet compartment.

Having collected all the flaps, go to the installation of the guides. They should be located strictly one under the other, even without deviations in a millimeter. Use a plumb or laser level ().

First screw the upper guide. It is attached or to the ceiling, or to the top of the cabinet. The distance from the shelves is at least 100 mm, otherwise the doors will hurt the shelves, things, shoulders.

In the lower guide from the sides in the grooves insert the spring-bumps. They will limit the door of the door. The number of springs is equal to the number of sash, they are installed at both ends.

If there is no laser level, so as not to suffer with the plumbings, it is possible to start the lower guide to simply lay until it is fixed. Then install one canvas, starting its upper rollers at the top, and setting the bottom to the desired groove. Thus, the doors will bind the upper and lower guides.

Exposed the canvas strictly vertically, you will automatically set the lower guide. It will only be fastened. Just closely watch the doors do not move.

The last thing is to do - glue the sides to stick Schlegel. This is a naval self-adhesive band, which softens the shutter strikes about the wall of the cabinet (or just about the wall, if the cabinet is inapplication).

Last Barcode - Sticker Sticker

On this door for the wardrobe, the coupe is installed and ready for work. Once again, the process can be viewed in the video.

Facade of the wardrobe Wears not only practical function, but also decorative, decorating the interior of the room, and with the right choice - even visually expanding it. The full right of choice offers our catalog in which the most common materials of the door wardrobe compartment are widely represented.

Chipboard

Doors from chipboard compared to other options have an incomparable advantage - they will cost the cheapest. But the price is not the only advantage. The advantages of this material can also be attributed to:

• ease;
• strength;
• moisture resistance;
• attractive appearance;
• large selection of pattern and colors.

They do not fade and do not crack. It will be appropriate to look in rooms with minimalistic design, but do not fit to the expensive interior.

Lacobel

This material is glass painted on one side into a saturated opaque color. The facade of lacobe is distinguished by saturation and uniformity of color, resistance to moisture and unlimited operational period. Many clients stop the choice on it because of its brightness and reliability.

Glass

Glass doors visually expand the space, so this is the optimal solution for the cabinet, which will stand in a small room. The value of the material is also low, so the glass is usually competing a DSP when choosing a budget option for the facade. However, the glass has one feature, which should not be forgotten, is fragility. This moment should be taken into account if there are children in the house.

Photo printing

Photo printing allows you to apply all sorts of drawings on the door of the cabinet - ranging from the landscapes and ending with a photo of a person. Photo printing is applied on the glass foundation, that is, in fact, these are the same glass doors, only in this case there will be no mirror on the facade, but a naturalistic picture.

Sandblast drawings

They are applied on glass, a thickness of at least 4 mm, thereby forming a rough surface. For application, sand is used, which is applied by a stream of special technology using a stencil in a special chamber.

The doors of the wardrobe are an important part of the sliding furniture. They form aesthetic facade, decorate the room and prevent dust from entering the internal space of the cabinet.

To fill the door, a wide range of materials is used. Often, chipboard, MDF, glass, mirror are used for this purpose. There are also rare and exotic finishing materials - bamboo, rattan, natural array of wood and so on.

The assembly technology and the device of sliding doors makes them a universal attribute of the house or apartment. They can serve as part of the cabinet facade or interior partition. In this case, in each individual case, the design should be as practical as possible. For this, there are a number of sliding doors systems. They differ in appearance, profile type, fastening method, threshold and so on.

Door design for wardrobes

To fill the doors, the wardrobe uses various materials. The greatest popularity belongs to the chipboard and MDF. With the help of fibreboard and panels, real design masterpieces are created.

Wardrobe "Armadio"

Wardrobe "Glitter"

Lady wardrobe

The photo of the wardrobes is presented in our photo gallery.

We offer to familiarize yourself with the number of ready-made solutions for the design of the wardrobes. The photo gallery presents sliding cabinets that differ by:

• the number of doors (two or more);
• appointment (children's, bedroom, living room, hallway);
• the presence of elements of glass and mirrors;
• color range of facade and profile;
• style (classic or modern style);
• internal filling;
• type of development (built-in, hull cabinet);
• the presence of open shelves;
• decor (photo printing, sandblasting, etc.).

Examples of modern design will help determine the appearance of furniture and learn new ideas for design.

The developed network of official representatives allows you to buy profile and filling for doors-coupe at wholesale prices. And many of the companies make it possible to place an online order with delivery.

3D Wardrobe - Convenient Visualization of Future Furniture

The program is a convenient free application that download on a PC or laptop in the appropriate section.

Advantages of calculating the door system with a calculator:

• the program does not require an Internet connection;
• special skills are not needed;
• the corporate calculator contains all the colors and types of profiles in the warehouse site;
• the program is updated when new systems appear in the assortment.

To use the program, it is enough to click the "Download" button and follow further instructions.

Video instructions for assembly and installation

To easily and without difficulty install sliding furniture or partition, it is enough to watch the video for the assembly of the doors of the wardrobe. Depending on the type of system (urgent, low-level, overall) doors can be installed:

• directly to the closet;
• in the doorway.

Even more videos about step-by-step assembly and installation of various door systems are presented in the relevant section.

For each individual case there is a specific video with instructions.

Before installing the system it is extremely important to calculate the correct position of the doors. In the rollers you will also find instructions for measuring the openings and niches. Thanks to video instructions, you will cope with any task:

• measurement;
• assembling doors;
• installing the door.

In the rollers, the options for fastening the doors of various systems are reflected in detail.

Filling the door wardrobes with MDF

One of the popular facade materials is MDF.

Glass sash sliding systems used in the organization of wardrobe, bathrooms, kitchens, living rooms, are produced in frame and frameless design. Special grace and concise attract the interior door coupe without a profile. To create durable, convenient for use, mechanically safe cavities are not at all necessary to overload them with frames and internal jumpers. Yes,frameless models It seems fragile, however, they are not in reality.

Super-fast materials are involved in their production, which can be divided into two groups:

1. glass, which has passed the procedure for hardening in a special furnace either having a multilayer structure;
2. plastics with high light lightweight abilities - plexiglas, polycarbonate.

What is in the structure of the construction?

The standard door-coupe without a profile has a simple but efficient device. In its center - light on the view, but the reliable canvas with a thickness of at least 10 mm. In it should already be done by the opening under the fastening of fittings. As a rule, the shells are performed until the stage of hardening the glass, because after this procedure, no mechanical intervention in its structure is allowed.

Fold is completed:

• guide, which has a type of thin pipe or rail. The carrier part of the system is made of a light, but rigid metal - aluminum, which is pre-anodized or painted. The track for the coupe without a profile is fixed in the wall above the opening. No outdoor supports are required by modern engineering solutions. Due to the suspension method of installation, the transmission section seems particularly elegant;
• the elements by which the cloth is combined with the rail. A roller carriage takes this role, for soft strokes complemented by bearings. Since thick flaps, the coupe without a profile often have an impressive weight, along with them it is worth buying reinforced mechanisms. You can also purchase a system assembly - in this case, the required components will select experts. It is interesting to look at models associated with guides using metal brackets;
• limiters enshrined at the edges of the track. They contribute to a soft stop of the section and do not produce it beyond the rail.

In the composition of the product may be present not one module, but 2 or more. Options for implementing systems There are many systems. For example,two bipoly sliding structures It is assumed to install a single-channel guide over the opening or two-channel - inside there. The cloths of the multi-door coupe without a profile slide along each other, shifting the cascade.

How do model make out?

The original look of products is remarkably emphasized by various processing techniques. Some of them are applied to the stage of hardening the glass, and after those are addressed. Among the most popular techniques:

• matting with the use of chemical paste or sandblasting machine;
• sticking polymer films - non-ferrous, mirror;
• photo printing;
• stained glass, art painting;
• engraving, etc.

Academy shops are invited to purchase interior doors-coupe without a profile at the best prices.