Modern repair requires large investments both to pay for materials and directly performing tasks. No wonder that many are trying to save, performing various processes on their own, it only wins. For example, the arch in the apartment will cost much cheaper, and the realization that all this is done by you will warp the soul.

Creating various architectural and design solutions, you not only create unique design elements, but also work with the ergonomic of the room itself. It is known that rounded angles are better perceived and add a visual component of coziness to any room. That is why this method was used in various vintage buildings. Rectangular sections today is just an attempt to perform more economical solutions, since mass construction does not favor individual solutions.

What are the arches?

Before the arch in the apartment, it is worth dealing with the fact that, in general, it is a solution. As a rule, the arch is called any opening that does not have the door. This, of course, is contrary to the opinion of many users for which such solutions contain only a semicircular completion. In fact, species arches exists not so little:

If you decide to create a really cozy and high-quality design in the apartment, then you will most likely have to make an arch. The price of such work ranges from 2000 to 4000 rubles. It can not be called too high, since a variety of modern materials allow you to make such processes very quickly and. However, you can and save by doing everything yourself, of course, if you have knowledge and abilities to such work.

How to make the arch in your apartment?

How to make an arch? First you need to decide on the type of design so that it exactly corresponds to the selected design of the entire apartment. After that, it is worth starting the choice of materials.

One of the best components to create such a design will be a plasterboard sheet. It is very easily processed and for creating a curvilinear site you will not need any special devices. It will be possible to limit the hacksaw, and better - the electrolovka. Of course, there are other materials, but work with them requires a special approach and is carried out longer, and more difficult.

In order for all work to be completed correctly, it is necessary to place all areas to begin. Determine the radius of the rounding, the beginning of the curvilinear area and the point where it will pass.

Then, according to the projected circuit, the profile is mounted for mounting the plasterboard sheet. Please note that when measurements need to be taken into account not only the form, but also the thickness of the mounted material, then not to receive protruding from the wall of the plots.

When the installation of the profile is completed, and, consequently, the frame on both sides of the opening is ready, it is necessary to cut the necessary sections from a drywall, which will create an arched transition. Finished pieces of material are fixed on the frame, and the general type of construction will already be approximately visible.

The final phase of the draft assembly will be the fastening of an arcuate area between arched transitions. It will act as a material all the same plasterboard. By the way, if the bending is very cool and there is a possibility that the leaf will crack - moisten it in water, then its flexibility will increase.

Posted by this site, you can consider all the work almost complete. It will only remain fixing the forming corners and close all the seams, after which it is best to carry out the finishing materials that are best suited for the design of your room.

All such works can be, and you can invite specialists for these purposes - this decision you need to accept you personally, because there is no particular difficulty in such work, but it is also very simple to be called.

Video about how to make the arch in the apartment do it yourself

In addition, even small deviations from the desired dimensions can cause various skews, so if you first make an independently arch in the apartment, be prepared for the fact that the process may have to be repeated until a qualitative result is achieved.

If such a method is complicated for you, you can perform an arc from bricks, aerated concrete blocks and even apply a polyvinyl chloride film as in stretch ceilings. Use any technology that is more convenient to you or is available to make the most attractive design in your apartment.

The question of how to make an arch of drywall, with their own hands, is interested in every owner of the house, which wishes its own forces to make changes to the residential space. If you get acquainted in detail with how to put the arch with your own hands, then there should be no difficulties.

Type of arch in the doorway

In order for the installation process of the arc from drywall, it does not cause difficulties, one should first pick up the photo on which the framework will be visible, as well as the features of its structure, the main part of the profile in the finished form. Such photos will help to act correctly and prevent errors in the installation process.

The success of the case primarily depends on which materials and what tools the framework and quality is made. Therefore, it is necessary to pay due attention to the issue and instruments for labor.

Plasterboard for Ark

Important shopping

1. To implement the conceived and make the arch in the apartment at the proper level you will need:
2. or electric jigsaw.
3. Pencil for marking.
4. Roulette for measurements.
5. Scissors that cut metal.
6. Samores and dowels should also be stock in sufficient quantities.
7. Such a tool as a screwdriver is necessary for high-quality design.
8. A knife, which is used as a stationery.
9. Natural paper will also need to align surfaces.
10. Plasterboard sheets of the desired size.

Required tools and material for work

How to make measurements

Another important step in the installation process of plasterboard arches is measurements. It is from them that depends:

• The number of materials necessary to implement the idea.
• How much money will be needed to acquire raw materials, for installation in the opening between rooms in the house or apartment of the plasterboard arch.
• As far as the correct form will be in the design.
• What framework under the plasterboard arch is installed for maximum stability.

Measurements for installation of plasterboard arches are as follows:

• First, the dimensions of the length and width of the vertical frame are determined.
• The next step is measured the upper part of the arched opening.

Arch dimensions depending on the width of doorways

• If the design is non-standard, then it is better to measure step-by-step, carefully measuring each segment, in which the arch will continue to be located.

Step by step measurement of the place where to install the arch

Cutting drywall

To make the required sheets to create a plasterboard arch, it is necessary to cut them, clearly adhering to the parameters of pre-performed measurements. To obtain an ideal arch, you need to understand what materials you can use in the process of cutting the strips of the required diameter.

Cutting plasterboard occurs by the parameters of these designs

Materials

To make marking and cut strips of the required size, you can use the following tools:

• Roulette, ruler, level. These guns will help make the markup of GLC.

Construction markup tools

• Construction knife. Cutting a profile with the help of such a tool requires some skills, so if a person never exercised such works with his own hands, it is better to prefer another tool for cutting drywall.
• Hoven also use. How to do this, tells the video of a given topic.
• Electric jigsaw. Giving preference to such an instrument, everyone will understand how to use it yourself. This device may be, which has non-standard rounded shapes. The electrolovka blade allows you to cut a model that will not require additional profile adjustment after the work is completed.

Tools for cutting plasterboard

• With the help of an electric drill it is possible to carry out even the most sophisticated work. This tool can create a variety of designs for the arches in the space of a house or apartment. With the help of the device cut out non-standard forms with which the interior design will be extraordinary.
• The planer will be needed to give a complete species. You can perform work at the stage when the design is in the opening.

Read also

Mounting framework Arches under plasterboard

Methods of cutting plasterboard

There are several types of cutting of plasterboard sheets, allowing everyone to install it with their own hands, in the hallway, living room, picking up the necessary way for yourself:

Standard cutting of drywall is made in a straight line
Figured cutting applied when cutting out non-standard forms

The names themselves are talking for themselves. Nevertheless, it is worth understanding the features and nuances of each of the cutting methods.

Standard cutting

If in the former doorway is planned to install an ordinary style arch, without additional bends and geometric forms, you can use the standard cutting method. This type of sheet preparation for the implementation of the arranging arrangement procedure is performed in a certain order. Step by step instructions, as follows:

• List markup with a pencil or other writing subject.

• Then the long ruler is applied to the leaf of plasterboard, and it is necessary to cut the plasterboard plate with a selected tool.

• If some flaws turned out, you can handle the surface with emery paper or. It all depends on how noticeable irregularities.

This method you can cut rectangular or square segments of plasterboard.

Figured cut

Interior arches may have intricate and unusual forms and sizes. To perform the work beautifully, you need to know the details and nuances of the process of cutting plasterboard sheets. In order to prevent errors, it is better to have a photo of the design that will be installed in the doorway.

For proper cutting of plasterboard structures, step-by-step instructions will also need. She is as follows:

First, as with standard cutting, start with marking.

It is necessary to make marking for drywall carving

The next step is the choice of tools for work. Most often for figure cutting of plasterboard use:

• Electrode with a cylindrical nozzle. These devices are made round holes. In this case, you can not even mark the markup, because a special nozzle will help to make an ideal circumference in shape. And it does not matter at all, the owner of the house has previously similar procedures or not, experience is optional for such activities.

• The electrolovka will help cut the elements of various shapes, not only rounded. Any geometric decisions will be embodied in reality, so very soon in the doorway, that is, at its last place, a wonderful design of a lightweight material will appear.

• Hacksaw for plasterboard materials. This tool will help cut any geometric shapes and small details from drywall. Using hacksaw, it is necessary to pay special attention to the markup of the sheet of plasterboard and drawing the contours of the future product or sheet, which will be attached to the frame.

• Knife and hammer. These tools can be used in the absence of professional devices.

After the desired sheet is cut, irregularities are removed on it.

Mounting metal carcass

When all procedures for cutting the profile are completed, proceed to attaching sheets to the frame. It should be approaching this issue, because it depends on how the appearance of the arches will be on the completion of work.

The framework is part of one of the most important. From how correctly the design is made when fixing the profile, no matter how much the material costs and what is the price of tools purchased for installation, most importantly, the correctness and clarity of work. To carry out the necessary manipulations, nicely, follows in the opening where the arch is planned, correctly measure the height and length.

So looks like a metal frame arch

It is also very important when the frame is made for the plasterboard arch in the corridor, hallway, kitchen or rooms, take into account the weight of the structure. Due to this, you can clearly determine what kind of complexity and strength need beams.

The following details must be taken into account:

• Strengthening with or screws, the length of which is chosen on the basis of the wall thickness and the carcass itself.

Metal carcass fastening

• In case it is planned uneven, with arches bends, it is enough to make cuts on metal beams. After that, they can be bent and create the desired form.

The owners of small apartments prefer not to close the door open openings, but to decorate their arched structures. At the expense of this, the space is visually increasing, the interior of the room becomes much more elegant and the combination of two rooms in one thing is carried out.

You can use ready-made arched structures that are sold in construction stores and represent a set of details, and you can assemble the arc with your own hands, pre-harves the necessary materials.

How to make elegant elements? Look at the photo of the arch do it yourself. List of technologies and materials used - huge - fantasize!

Installing arches in the apartment

At home you can not resort to the help of a construction team and engineering skills to establish incredible beauty of the arch. It is enough to choose your favorite arched design and a material with a tool to make it. If you follow the instructions below, you can avoid the most frequent errors that make newcomers.

The arches structure themselves in the construction industry usually play the role of supporting elements during the construction of ceilings and walls. In our example, the doorways are not supporting structures. For the first case, materials are taken, given the serious load on the walls, decorative arched structures must withstand only their own weight.

The door arch in the apartment replaces the door, it is installed on the same place as a movable design. This is the future element of designer design.

The ideas of the arches are dumbfounded, the most simple we describe in our article. You can make an arch using a bar 2-3 cm by a cross se section or light profile. This design in any execution will be perfectly held the weight of the finish. The main thing is to reliably consolidate all the elements on the wall so that the beautiful decor does not sprinkle after a couple of days.

Note! Decorative arch more plays a designer function in apartments, it is not supported by the main designs. The main burden in a similar situation on the walls of concrete and jumpers.

There is a huge selection of arched forms and design solutions, each of which is selected under the case.

The arch presented above as a visual example of the arch has the form of a semicircle of the correct form. In the latter case, the passage with strict outlines of the rectangle. The intermediate options for arched structures go further.

There are a mass of other examples where only one support is used or curved racks. The appearance of the door arch directly depends on the selected room design.

It is necessary to take into account the size of the openings, the height of the ceilings and some possible features of the planning of the room. Someone at home in a classic retro style will be perfectly fitted with an elegant arch with a semicircular shape, in others in the modernist - rectangular portal form.

These things affect the taste of the owners and the design features of the apartment. Someone chooses the cone-shaped arches at all.

Choosing a classic, note that the ceilings in the apartment are tall and have a height of at least 3 meters. If you have a typical panel apartment with a low ceiling, use the arched system "Modern".

Wide racks of the Romance model will be perfectly complemening the army of the face with wide racks. The arch model "Portal" is suitable for the interior with clearly predominant direct forms. This option is the perfect choice for log houses.

Do the arch do it yourself

Make an elegant arch can be quickly using plastic and laminated elements, step-by-step instructions How to make the arch is presented on. They are cut to the desired size in height, and then they are attached according to the instructions in the right places. These are the standard options that are made on a single template, they do not surprise the buyer, and the price is not always tempting. Yes, and choose the model of the desired size under your discourse is sometimes very problematic.

To make the design elements of the arch, we will need the following materials: Fiberboard plates, drywall plates and plywood. How to make the arch do it yourself? If you watched as professional builders work with drywall plates, they probably guessed that they are best to choose to cover. They can be separated after installation with various materials. In turn, the thin plywood has one big plus - it is easily bent.

The frame of the Arches is made from the bar with a cross section of 20 x 20 mm (30 x 30 mm) or a metal profile.

How to make the arch in the opening?

Bright and causing arc made of red brick, concrete or aerated concrete blocks. Red brick can be used without finishing materials. Such an arch will emphasize the solidity and material security of its owner.

Perfect for the modern design of the premises. The weight of such a design is very large and in old apartments to build a similar one is not recommended, a large load on the walls.

Metal structures of complex form should be left for work by professional designers and engineer. Metal is difficult and troublesome, these projects are very complex in their implementation and engineering documentation is prepared in advance.

Profile and drywall are the simplest and most affordable things that allow making the designs of any shape and style.

Arch of wood

Not everyone likes a pine person, but for finishing works, any other noble wood material can be used: oak, ash and others. Beautiful arches in the interior will complement the elegant classic wooden furniture.

In general, working with any tree without experience is very difficult. Better all work entrust to professional builders. Focus on your own features and experience.

The opening of the arched construction from the tree is created by assembling a variety of small fragments. With the help of pressing, they make round elements, then glue them or twisted each other. At this stage, a lot of tools and time will be required.

Photo arches do it yourself

The arched arch attaches to the room of elegance, it looks modern and stylish - they are classified, depending on the shape, material of manufacturing, style.

Material

Style

The form

Interroom Arches are used to create a solid space effect - this is an up-to-date trend of modern interior design.

note! Arched arches are used in small apartments: they visually make the room spacious, freer.

The most popular are the arches of plasterboard:

• The material allows you to embody any, even complex and asymmetric, form.
• A person who does not have narrow knowledge in construction can cope with plasterboard - the material is easy to process.
• Plasterboard does not create an additional burden on the design of the house.
• Such an arch can be decorated with all sorts of decorative elements: shelves, niches, point lamps.
• Plasterboard - environmentally friendly, safe material. It is possible to use it even in children's rooms.
• Compared to other materials for mounting the arches, plasterboard is most accessible for the price.

Attention ! For mounting the arched arch, it is necessary to buy special plasterboard. It is characterized by a lesser thickness, the presence of special reinforcing fibers, high quality. For ease of installation, it is recommended to buy ready-made sets of arched frames. The backlight must be done at the installation stage of the frame.

Stages of installation of plasterboard arched arches

The most popular version of the doorway is imitation of the arch. This option can be used in the case of a high doorway. Pseudo-segments of the structure are attached to the edges of the opening and in the corners. Imitation is suitable for premises in oriental style.

note! A common way to decorate arched openings is a polyurethane stucco. Interior in classic styles, Baroque, Ampir will decorate such stylish decorative elements. The stucco is fixed using a special glue. The polyurethane decor is made in the form of overhead planks - moldings, protruding parts - Sandriks, artificial columns.

Selecting an arches for the doorway depends on:

• Parameters of the doorway;
• Ceiling heights;
• Style in which the room is made.

Reading time ≈ 8 minutes

If you have to repair in the apartment, then you may be useful for information about how to make an arch, and make it with your own hands at home beautifully and correctly, without resorting to the help of builders. Recently, such interior elements attract more and more attention. The door is cleaned, and the opening itself is decorated in the form of an arch, which can have a wide variety of, sometimes bizarre forms.

Arched opening of an unusual form

Apartment options for arched openings

The hosts can chase several purposes: create a common space, expand the room, create an easy and elegant design and so on. If desired, it is worth buying a finished arch in the construction department, as a last resort, attach a little effort and give a little time to create an original and interesting option that will be exactly exclusive.

Arch got an extraordinary distribution

To enjoy the passage from the room into the room without applying the door, it is not necessary to induce the wage brigade of the masters. Correctly pick up the type and format of the structure, you will calmly make everything yourself. It is equally important to competently approach the choice of materials that will be used when creating this item. The step-by-step instruction below will tell you how to make everything as best and avoid common errors.

Different types of arches have some differences in the design, which affects their further installation. The main differences are precisely in the structures supports.

It is worth noting that interroom openings do not belong to the carrier. Therefore, it is important to choose the arch on the basis of the corresponding parameters.

Beautiful arch between rooms

Arched opening, which is used instead of an ordinary door, is performed from several materials. Now we are talking about the framework of the whole design:

• metal profile, which is mounted on top of the plasterboard sheets (GLC);
• wooden bars with a cross section of 20-30 mm.

Such a type of arch with ease will keep your own and overall weight together with the finish. Here the main task is a reliable and rigid fastening to the walls. This will allow to protect the elements and remain in place at the original form not one year.

They are talking about a private house or an apartment, an open-type arch is used only as a decorative element. But the entire carrier load in such an embodiment is transferred to the side concrete walls or the jumper over the structure itself.

Purchased plastic arch

Possible types of arches and features of each of them

Before making the arch do it yourself at home, you need to choose the embelling form, which will look in the future beautiful and correctly. The most common forms are:

• classic;
• romantic;
• modern;
• ellipsed;
• trapezoidal;
• portal.

Strict Arch Portal

Arched opening of the classical form is based on the right semicircle. But the arch-portal consists of strict outlines of the rectangular shape. Other varieties are hiking from these two main options. In addition, there may be asymmetry using only one support from the side. Or the form can be generally unthinkable.

The most common form of openings

The choice and shapes and finishes of the future arch should be chosen based on the overall design of the room so that it harmoniously fit into the interior. For example, the semicircular arch will perfectly fit into. It is necessary to initially consider the following parameters:

• ceiling height;
• dimensional dimensions;
• individual features of the apartment.

You need to understand that one living space looks great with a classic arch, and the portal harmoniously arrives in the second. But here it all depends on the personal preferences of the owners.

Arch in Modern Style

1. The classic arch will look great where the ceiling has a height of over 3 meters.
2. Modern design is the perfect option for the panel apartment building and design entry into the kitchen;
3. Romantic with wide supports is well framed by the entrance from the corridor into the hall;
4. Portal structures fit into the interior with clear lines (both vertically and horizontally). It is well suited to install in beautiful houses from a wooden bar or logs.

Log house with arch

Selection of material

To quickly make an arched opening, you can buy a ready-made kit to create an arch. But this option is not suitable because of a fairly high price. Yes, and their appearance is not very different from each other. However, the selection of the desired model can go to a dead end due to the difference in the parameters of the opening and future structures.

The main components of Arki.

Most often, the following materials are acquired for independent manufacture:

• plasterboard;
• plywood sheets.

The winner is drywall, which has a small weight and is quite comfortable in the work. The advantage is also believed that it is plasterboard sheets to be easily separated by many finishing materials. And plywood is better than flexing.

Finishing arched opening

To create a framework, apply:

• wooden bars cross section 20 * 20 mm and 30 * 30 mm;
• metallic profile.

As an option: you can create similar structures from brick, concrete, aerated concrete. From above will only give a neat appearance. But it will have to do not like everyone. After all, such an interior is an indicator of consistency and status. It is necessary to take into account the weight of such a design. If the overlaps are old and fragile, then such a type of arch should be folded.

Metal frames are not only much used due to additional weight, but also their considerable cost. If you want to build an arches of a complex shape, you should understand that it will be very difficult to do it. To construct the arch, it is better to choose a plasterboard and a suitable profile.

Step-by-step creation arch do it yourself

Below are the photos and step-by-step descriptions of the whole process, with the help of which you will be much easier to make your masterpiece in the doorway. Initially, you need to take care of creating a frame side. And only after that, to engage in the trim and finishing finish. The main thing is to be as attentive and neat. Then your idea will be implemented at best.

Plasterboard Arch (Scheme)

Before starting to install the arch, you need to properly prepare the doorway.

1. Door cloth and an old door box required to remove.
2. Expand the opening to those dimensions necessary for installation work.
3. You should not stack the cut walls to which the framework frame will be installed. They will block the skin in any case. It is necessary to simply align the edges and dismantle pieces of old building materials (plaster, concrete particles, dropping bricks).
4. The main task is to create a basis and reliably attach a framework to it. It takes it to be in a vertical position. Slopes are not allowed.
5. If the arch will have lighting or backlight, then the wiring is carried out before starting the installation work.
6. Measures are not removed in one, but several points of the opening. When the walls do not shine perfectness, it is worth choosing the most wide part of the opening. This will be the width of the design.
7. The template on cardboard will help facilitate markup. So you can designate the necessary and do not make mistakes. Moreover, you can look at the place, how the future arch will look like.

Important! Do not forget that the arched opening up the top absorbs about 15 cm of the total height. The minimum distance between the arch and the ceiling should be 20 cm. This information is made under preliminary calculations.

Arch reduces the height of the doorway

The construction of the carrier frame is an important stage, because the entire design of the arch will hold on it.

Fasteners on the frame

For flexion of drywall, a dry or wet method is used. For the first need a jigsaw to carefully make cuts. For the second, it is better to apply a needle roller for quick and uniform wetting panel. With the help of screws, the carved arches are installed in its place. The final stage is plastering and finishing the selected material.

Ready arch

You now know how to make the arch do it yourself at home, and you can construct it beautifully and right. The main thing is to fantasize and choose, but do not forget to accurately follow the size and instructions on the assembly. And in the video below you will find the entire process of creating the arch.