Last times remained when, when buying a bath, the furnace was preferred by foreign brands. Of course, their products did not get worse, simply appeared manufacturers who are able to compete with the famous firms in Russia. One of these manufacturers is the Siberian company Thermophore, which occupies a leading position in the iron furnace market.

Thermophorm was a pretty simple oven, collected by two friends-engineers, large fans of the Russian bath. It was a wood-based model, which, by the way, and became a prototype for the entire subsequent ruler.

Today the range of the company is already large enough - it consists of more than 30 models with which the Russian consumer is familiar. All heating devices are distinguished by the price and cost-effectiveness, moreover, they all look beautiful and aesthetic, so they will fit into any interior.

The manufacturer's company offers instruments created for specific climate conditions, i.e. designed for laid frosts. The furnace chambers of furnaces are made of heat-resistant steel used before this solely in the aircraft industry. Thanks to the use of chromium steel, the heat is preserved better, due to which the efficiency of the devices increases significantly. In all thermal devices, the company uses a double burning system, which allows for a record short time to warm the pair to the desired temperature.

So, for heating steamed to 100 ° C in winter, users of the oven furnaces spend about 60-70 minutes, in the summer time, it is possible to start the bath procedures after half an hour after the molding. The air temperature rises quickly, and the rigid IR radiation created by the heater is quenched by a special convector cover. The parley room is dynamically warmed by circulating air flows, thereby ensuring a cozy and soft furnishings.

At the heart of all manufacturer furnaces - a pyramidal heater (it can be open or closed) a significant amount (stones are heated simultaneously with 5 sides). Also in the design includes a thin-walled fire chamber of high-alloyed steel, water tank, heat exchanger, and already mentioned above the casing convector.

Note! Capacity of the heater varies within 25-100 kg. At the same time, to set / maintain the required temperature in the furnace chamber, you can even not be found in the parley itself - this is possible due to the use of the remote fuel channel (this is available in some models).

Separately, it is worth using a self-reserved door of a unique design that prevents burns in a random touch. And if you equip the furnace by a door made of heat-resistant glass, it will be possible not only to visually monitor the fuel combustion process, but also enjoy the type of open flame language.

Heating devices from the company Thermophore are calculated on the bathroom with a volume of 4-24 m³. What is characteristic, they not only drive the steam room, but also warm the adjacent premises, provide users with high-quality soft steam and, of course, warm water. As for the method of installing a water tank, it all depends on the specific model. In some models, the tank samovar is located in the center, on the basis of the chimney channel, which significantly simplifies operation. But in other models there is a heat exchanger with remote tank. All water heating containers are made from high-quality "stainless steel". If all the conditions of operation of the system are observed, the water in the tank will never boil, and it will be heated only to 92-95 ° C.

Advantages and disadvantages of products

The line of furnaces for Baths Thermophore has acquired numerous positive reviews and high consumer estimates due to its advantages:

• affordable cost;
• convenience of operation;
• safety;
• excellent external data;
• the possibility of using almost any room;
• durability;
• reliability.

Each of the models has its own dimensions, design features and power, which is maximally manifested in specific operating conditions. What is characteristic, bath furnaces can be applied not only in domestic pair, but also in commercial baths that have a large area. If we compare the products of the thermophore with such Russian models like Ermak, volcanomplekt or heat carrier, then it has more compact dimensions, high fuel economy and attractive design.

Note! Another advantage of the stoves described is that they are produced immediately in several colors (terracotta, anthracite, stainless steel. Steel and chocolate), thanks to which perfectly fit into any interior.

As for the shortcomings of these initially good furnaces, they are not the fact that the manufacturer does not know what and how to do, but in terms of marketing are extremely important and established stereotypes. For example, most of the admirers of the bath, rarely applying in the steam room due to the lack of their own, believes that the perfect bunk is 100 ° C in steaming and open stones. Something similar they are looking for specialized stores before the construction of the foundation, which means that such aggregates are best sold. Largely fortunately, for the true admirers of the Russian bath, more competent models are always created - not only attractive, but also functional.

Prices for stoves for Baths Thermophore

furnaces for Baths Thermophore

The company offers more than 30 product items - from small units designed for 4 m³ (for example, OSA), to high-power models that can heat the room with an area of \u200b\u200bup to 50 m³ ("Kalina"). By type of fuel used, all furnaces are divided into two large groups:

• gas;
• wood.

Consider each of the groups in more detail.

Gas baths

The range of the Siberian company consists not only of wood stoves, because it lies four modifications of gas equipment. They are not so popular as the source of the Russian bath - traditional wood ovens, but they have their own buyer.

Note! All models are divided into two groups of the type of material. It may be a heat-resistant "stainless steel" (this is the inox line model) and high-quality structural steel (Carbon). Representatives of the Carbon line are cheaper, but at the same time they retain all the characteristics and traditional design. True, they are somewhat inferior on the operational resource.

Video - thermoform furnaces. Range

We suggest you familiarize yourself with the model range of thermoform furnaces operating at Gas. This can be done using the appropriate table.

Table. Characteristics of gas stoves thermoform

Model	Type of fuel	The volume of the paril	Material	Description	Cost, in rubles
	Gas	6-12 m³		Representative of a series of anti-crisis stoves for a bath *. Gas equipment does not complete, so it needs to be purchased separately (the manufacturer recommends using the Sakhalin gas burners).	13 999
	Gas	6-12 m³		The characteristics are practically the same as the previous model, the main difference is to "anticrisses" (the type of material used). It is produced in 2 colors - anthracite with inserts from the "stainless steel" and a terracotta.	13 999
	Gas	8-18 m³.	High quality thickened structural steel	Another representative of the anti-crisis series is not equipped with gas equipment (you need to buy separately).	16 999
	Gas	8-18 m³.	Heating Stainless Steel	Characteristics are the same as the previous model. Produced in two colors (anthracite and terracotta).	19 999

* - Anti-crisis series of furnaces Thermophore includes models (mostly existing), made of structural steel, thanks to which it is possible to save up to five thousand rubles to buy.

Bath furnaces on firewood

No matter how the heating equipment improves, no gas furnace replaces the characteristic smell of burning firewood and the atmosphere created by a lively flame. Therefore, most popular is the manufacturer's wood furnaces.

Note! Due to the large demand, the company significantly increased the range of its products in this segment. Now, under the brand, the thermophore is produced several dozen models working on firewood. All of them differ in parameters and power, but general features are still available - this is a long service life and safety.

For the convenience of convenience, the main parameters of all existing wood models are presented as a table.

Table. Those. Parameters of wood stoves

Model	Maximum weight of stones, kg	The volume of the paril	Description	Cost, in rubles
	25	4-9 m³.	The compact aggregate with the central location of the chimney, there are modifications having shortened fuel channels. Available colors - anthracite, chocolate, terracotta.	7 999
	25	4-9 m³.	Model with similar characteristics. Used in popular minibars lately.	8 999
	88	4-9 m³.	Compact, but powerful oven with the central location of the chimney. Representative of the anti-crisis ruler. Limit of loaded stones - 88 kg.	13 999
	88	4-9 m³.	Representative of the line of furnace grids with the parameters of the previous model (only the brand of steel used is different - here its scale temperature is 750 ° C).	14 999
	35	6-12 m³	Upgraded version of a powerful compact device. Thanks to the separated heater, the heating of the stones occurs more intensively. Possible colors - anthracite and terracotta. Anti-crisis ruler. Recommended for Finnish sauna.	9 999
	35	6-12 m³	Parameters are the same as the Furnace compact 2013 carbon.	10 999
	55	8-18 m³.	The model was created on the basis of Tunguska, it is distinguished by the presence of the window for adjusting and monitoring the combustion process. Available designs - anthracite and terracotta.	16 999
	60	8-18 m³.	Advanced version of Tunguska. A solid external casing, on which there are no ventilation holes, high-qualityly shields IR radiation. Anti-crisis ruler.	11 999
	60	8-18 m³.	A model with similar parameters, characterized by the type of steel used.	14 999
	60	8-18 m³.	The furnace with a separated heater and the central location of the chimney. Equipped with a large translucent screen.	14 999
	70	8-18 m³.	Anti-crisis model with a closed heater, where the stones are heated to 600 ° C. A gas modification of the furnace is available.	16 999
	70	8-18 m³.	Parameters are the same.	19 999
	70	8-18 m³.	Anti-crisis model with a two-stage steam formation system. Open heater. Chimney is located in the middle.	16 999
	70	8-18 m³.	Parameters are the same.	19 999
	45	8-18 m³.	Anti-crisis model with an extraordinarily large reference screen from Scott Robakus with a diagonal of 580 mm. Stylish design, split heater, reinstalled an intrinsic box.	20 999
	45	8-18 m³.	It has the characteristics of the previous Witruvia, but is made of cheaper steel.	22 999
	120	8-18 m³.	Anti-crisis grid with original design and translucent screen.	16 999
	120	8-18 m³.	According to characteristics, it does not differ from the previous model.	19 999
	50-150	8-18 m³.	A spectacular stove-barrel in which the strength of the elements of the furnace chamber is enlarged one and a half times.	26 999
	30	8-18 m³.	Anti-crisis stove vertical layout with closed heater. There is a built-in container for water heating.	15 999
	60	8-18 m³.	Representative of the anti-crisis line with a translucent screen and a two-layer rear wall.	12 999
	-	10-18 m³.	The furnace-air conditioner iswedowing for a bath capable of issuing an unlimited overheated steam. Completed tank for water.	26 999
	92	12-24 m³.	An updated and more powerful version of Tunguska with a heat exchanger placed directly in the camcorder. Anti-crisis ruler.	21 999
	92	12-24 m³.	Model with characteristics similar to the characteristics of the previous version. It is characterized by the type of steel used.	18 999
	90	12-24 m³.	Big oven with the porthole and convector casing. Deep unbeatable heater, the heat exchanger is placed directly in the heat chamber.	20 999
	90	18-30 m³.	Another model of the premises with a large screen and built-in heat exchanger.	34 999
	70	30-50 m³.	Business class furnace, which is the most expensive model in the products of the company Thermophore. Equipped with a two-row heat exchanger for 10 cylinders, a large porthole and remote pair injection. Closed heater, vertical pair exhaust.	69 999

Note! If we talk about popularity, then people often prefer the following models: "Geyser", "Angara" and "Kalina".

Preparation of the furnace thermoform to operation

Installation of the furnace and chimney tube should be made in accordance with SNiP 41-01-2003.

Snip 41-01-2003. File for download

In more detail, the procedure for installing and operating the device (on the example of the model "Kalina) is described in the manufacturer's instructions below.

Kalina INOX BSE then NK Pra

Also with the basic requirements for installing a metal furnace in the bath can be found from the article about. As for the commissioning of the instrument, it is worth noting several important points here.

Commissioning rules

Before starting to the first catch, it is necessary to make sure that the oven, water tank, chimney pipe and protective structures were established according to the requirements mentioned above.

Note! During the first oily, metal surfaces are processed, and the components of the orgsilicate enamel can highlight the smell and smoke. This is quite normal, and in the future they will not stand out.

Obviously, the first launch should be carried out only with open doors and windows (the procedure should last at least an hour), a fully loaded flop chamber, filled with a tank and an empty heater. If all structural elements work normally, then at the end of the intimation, the room is ventilated, and water from the tank merges.

Stones can be downloaded after the device body finally cools, and the paint fully solidifies.

Geyser 2014 - installation and operation manual. File for download.

Safety requirements

When operating the furnace, thermoform is prohibited:

• leave the brawling device unattended;
• place fuel and other combustible materials on the precipitation sheet;
• lower the furnace with gasoline, diesel fuel, kerosene, and so on.;
• positioning flammable materials closer than 50 cm from the device;
• close / open the door of the flue chamber not for the handle;
• dry on the surface of the device (dacha partially cooled) any things;
• finding firewood (if the stove is wood) in the fuel canal - because of this glass can be deformed.

It is also worth adding that when operating, mechanical glass damage should be avoided. The use of the device with damaged glass is categorically prohibited. The ash extracted from the furnace chamber must be spilled with water and moved to a safe place.

To find out what the thermophores are thinking about the furnaces, we advise you to see the video review below.

Video - review about the model "Angara". First part

Video - review about the model "Angara". The second part of

Want to get the maximum effect from using a bath furnace, pay attention to manufacturers located in cold regions. Agree, if the consumer cannot get the necessary temperature in the steam room, such a company will simply go broke. Therefore, manufacturers are trying to make the highest quality product, especially for the places where they are located.

There are many modifications of bath furnaces, for example, a thermoform bath furnaces or heatodar, differing from each other with various constructive features. Today the article will tell about the devices of the company "Thermophore", which were designed for cold winters and a hot summer.

Construction and operation

Flak

One of the main elements of the bath furnace. The life of the device and its effectiveness depends on its durability and proper design. Thermofore bath furnaces have firing from special heat-resistant steel with a chromium content that was previously used only in aircraft engineering.

The material makes it possible to hold heat for a long time, increasing the CPD of the bath furnace at times. Also, the principle of double burning is also applied, which allows you to warm up the pair to the required temperature in minutes.

In winter, the hot stove of the thermophore about 1 hour is able to bring the temperature in the steam room to 100 ° C, in the summer - just more than half an hour. Air quickly and gently warms up in the steam room and in other bathroom rooms.

Casing convector

Furnaces for bathing thermoform are equipped with a convector casing, a device designed to protect the organism from the rigid effects of IF radiation, which comes from the furnace. Due to the free circulation, warm air is dynamically and evenly heats the steam room, creating a comfortable and cozy atmosphere.

Kamenka

In the design of the stove for the bath Thermophore enters:

• a closed or open heater in the form of a pyramid and a large tank, in which from different sides at the same time;
• light furnace with thin walls of high-alloyed steel;
• tank samovar or heat exchanger;
• cover convector.

It is allowed to use stones with a total weight of 25-100 kg. The use of a remote fuel channel on some models allow you to lay the fuel and maintain the temperature from the steam room and from adjacent rooms. The furnaces depends on many factors and is located in the range of 7000-48,000 rubles.

Door of the furnace

Thermofor's bath stove ensures protection of the skin of the fibers during its operation. It is equipped with a self-elastic design for her cooker, unique in its kind. You can watch the combustion process through heat-resistant glass.

Application

The "Thermophore" bath furnaces are used in rooms of 4-24 m 3. Heat is distributed for wage, water heating and heating nearby rooms.

The water tank for each model is different. For example, it can be installed directly to or connect to the heat exchanger furnace.

In both cases, they are made exclusively of stainless steel. If the installation is made correctly, the water in the tank will never boil and there will be a constant temperature - 90-95 ° C.

Benefits

1. A long service life due to heat-resistant steel, in which the chromium content of more than 13%.
2. The stones and air are heated quickly due to the fact that the cast-iron grate pumps air under the lower layer of fuel, due to which a powerful high-temperature flame is formed. The furnace surface is calcined in a matter of minutes, because the heat-resistant steel made it possible to reduce its thickness to 2 millimeters.
3. Equally, the entire volume of the wage was heated, due to the convector casing, which creates a strong hot convection stream, evenly heating all the corners of the room.
4. The casing convector protects the steamboats from the rigid thermal radiation.
5. Bath furnaces Thermodar burned oxygen, due to the fact that the walls of their furnaces are chemically inert and not oxidized at high temperatures.
6. The thermophore bath stove produces high-quality pairs due to the fact that a non-ventilated deep heater can warm up with a flame from many sides. Also, secondary air through special channels survives gases that flow around the heater. Secondary burning torches are used for better heating of stones.

1. A pre-closed bath broom can be poured directly to a pair emanating from the preheated stones up.
2. It is possible to carry out visual control of combustion of fuel through a translucent screen with heat-resistant glass.
3. The furnace can operate in different heat transfer modes:
   the rapid set of temperature is the filling of the firebox with small firewood and the complete opening of the ash bar;
   Maintaining a predetermined temperature is loading into a firebox 2-3 lanes and a suspicion cover.
4. No cleaning from soot is required, since the places of its accumulation in the internal cavities of the furnace are burned by an open flame through special gaps.
5. Long service life provides an outer painting of the surfaces of the heat-resistant enamel, or the manufacture of stainless decorated steel furnace.
6. The weight and dimensions of the furnace make it possible to easily transport them on passenger cars.

Choice

There are three price categories:

• premium;
• classic;
• economy.

At the same time, it is important to know the sizes of the steam:

• in the mini-baths of up to 9 m 3, the models "OSA" and "compact" were well shown;
• for steam room from 18 m 3 Use the Angara furnace with a moderate and soft steam. For lovers to independently adjust the temperature and steam, you can offer the option "Biryusa".
• parics in volume up to 30 m 3 are heated by premium-class devices that can accommodate almost 100 kg of stones. They are equipped with heat-resistant glass, which allows you to enjoy the process of burning fuel. In addition, these models are significantly functional than the other options, often have an exclusive version.

The company offers wood stoves for Baths Thermophore, for example, Tunguska and gas models. The latter are designed for rooms with a volume of 12 m 3. For example, the model "Urengoy" has proven well, the main advantage of which is not needed to throw in it into it.

It is equipped with gas equipment that does not require control during operation. Working elements are located behind tinted durable glass.

Rules for installation of the furnace and chimney

Before correctly installing a bath furnace, the thermophore, it is necessary to explore SNiP 41-01-2003.

The instruction describes in detail the ways to protect the room from accidental fire:

• place your own hands on the floor before the Metal Sheet Door;
• drop the wall adjacent to the furnace, a metal grid with a thickness of 25 mm or a metal sheet with asbokarton;
• from the furnace door to the wall distance should be 1250 mm and more.

Tip: Leave between the riding chimney and the ceiling of at least 500 mm.
Isolate it with a material capable of withstanding high temperatures.
So you can avoid condensate clusters in it.

If the furnace suddenly snaps, check:

• whether the smoke exit smoke is not closed;
• is the top point of the pipe below the roof of the roof;
• as, and whether heating devices or other furnaces are not connected.

Tip: Make sure the chimney does not have horizontal sections and sharp bends. Remember, the knee of the bath furnace should not rest in the wall of the chimney.

An important value of air indoors has an important meaning. This is especially important when the steam room has sealed doors and windows.

When the installation of the oven in the thermoform is complete, it is recommended to carry out the first furnace with an open pair. Then the smell of corrosive oil residues will be able to weather quickly.

Output

The application of the furnaces of the company "Teplodar" facilitates the operation of the steam and allows you to achieve the necessary temperature and maintain it at a given level by a small amount of fuel. In the video presented in this article, you will find additional information on this topic.

The furnaces of the Novosibirsk company Thermophore recently enjoy ever in great demand and it is not by chance. Kamenka Thermophore has gained popularity from buyers due to reliability at work and affordable prices.

Today, the company produces a new, allowing you to make products more affordable even for people with a little sufficient.

Let's see which furnaces offer the thermophore, structural features of furnaces, characteristics, and also let's see how to put the oven furnace in the bath.

Models furnaces thermoform

The company Thermophore today produces various models of modern furnaces, differing in their design, heat production, the presence of additional options and differing in principle.

In the range of products manufactured by products, there are wood charming stoves, gas baths, heating and heating and cooking furnaces, as well as boilers of various purposes.

Furnaces are most popular among bath stoves, and gas furnaces are not less in demand.

Depending on the material manufacturing material, the thermoform is divided into stoves made of high-alloy stainless steel (designated in the name in the word INOX), and cheaper counterparts from structural steel (designated by the word Carbon). Cheaper models belong to the so-called anti-crisis line, read below.

How to choose a furnace thermoform

To select the furnace, proceed from the size of the bath, as well as the preferred method of heating.

If gas has been carried out on the site, then you can look at the Gas Kamenkov Urengoy INOX, Urengoy Carbon, Inox Taimyr and Carbon Taimyr.

Thermal production of the furnace is chosen depending on the volume of pair and manufacturer's recommendations for each specific model. At the same time, the rule should be followed - the value of the volume of steam room (cubic meters) should not close to the maximum volume recommended by the manufacturer to use a certain model of the furnace.

In other words, if the furnace model you have chosen is recommended for installation in the room by steam volume from 6 to 18 cubic meters., It is better to use it in a steam room, the volume is closer to the middle of this range (that is 10-12 cubic meters). If such a furnace is installed in a doublen volume of 18 cubic meters, then it will work at the limit of its capabilities, which will affect its service life and on the convenience of operation.

In addition to the size of the room and heat production, the furnace should pay attention to its design features.

If you like to watch the flame game in the burner, you can buy a model from the line of the Viter. These models are characterized by a large size of overview glass in the furnace door, allowing you to admire the flames of fire.

It should also be paid to the method of cooking hot water for a washing. You can choose a model with a tank setting on a saming type or look at models with a built-in heat exchanger, which allows you to make the hot water tank from the steam room in the nearby room. For a small bath, a couple of people can pick up a model with a built-in tank.

Depending on the boot of firewood, you can choose a furnace with an elongated or shortened fuel channel. An extended flue channel allows you to remove the flue door to the next room through the wall and there to load firewood. But, if you do not want to get out of the steam room once again to throw firewood, you can choose a stove with a shortened fiber channel and loading firewood directly in the room of the steam room.

Wood chambers of thermoform

The most popular buyers are wood chambers of the furnace. They do not require gas on the construction site of the bath, and also allow to obtain easy pairs with minimal cost.

Currently, the company produces the following models of wood chairs:

• Sayans;
• Biryusa;
• Karasuk;
• SPRAIN;
• Variate;
• Geyser;
• Aurora;
• Tunguska;
• Hangar;
• Vitruvia;
• Sayans
• Kalina;
• Gekla.

Characteristics of stoves thermoform

Below, we give only a small table of the most important indicators for each of these models:

Furnace model	Material of manufacture	Mass of the furnace, kg	Size, mm.		Price, rub
	Carbon steel
	Stainless steel
Sayans mini carbon.	Carbon steel
Sayans mini inox	Stainless steel
Gaiter Mini 2016 Carbon	Carbon steel
CD 2013 carbon.	Carbon steel
Compact 2013 INOX	Stainless steel
Aurora INOX.	Stainless steel
Tunguska 2011 carbon.	Carbon steel
Tunguska 2011 INOX	Stainless steel
Angara INOX.	Stainless steel
Angara 2012 Carbon.	Carbon steel
Angara 2012 INOX	Stainless steel
Geyser 2014 Carbon.	Carbon steel
Geyser 2014 INOX.	Stainless steel
Vitruvia Carbon.	Carbon steel
Vitruvia inox.	Stainless steel
Sayans Carbon.	Carbon steel
	Stainless steel
Vita Barrel Inox.	Stainless steel
Biriskaya 2013 carbon.	Carbon steel
Karasuk Carbon.	Carbon steel
Inox pigtail	Stainless steel
TUNGUSA XXL 2013 CARBON	Carbon steel
Tunguska XXL 2013 INOX	Stainless steel
Sayany XXL 2015 Carbon	Carbon steel
Sayan XXL 2015 INOX	Stainless steel
Aurora XXL INOX	Stainless steel
Kalina Carbon.	Carbon steel
Kalina INOX	Stainless steel
	Stainless steel

Video Overview Heizers, Angara 2012 and Geyser 2014 You can see below (for playback, click on the triangle):

Furnace Thermofor Geyser.

One of the most popular models manufactured by the thermoform furnace is a geyser oven.

She, like many other models, is produced in two versions - in the budget modification of Carbon from structural steel and somewhat more expensive inox modification from stainless steel.

Constructively, the stove geyser consists of a fuel channel, fireboxes, perforations, steam pipes, a double-circuit heater protected from heat-resistant screen and chimney. The geyser furnace device is shown in the picture below (click on the image to enlarge):

This furnace was designed by the engineers of the company Thermophore on the basis of the two most successful modifications of Geyser and Angara 2012 CARBON.

The furnace is calculated on the volume of steam room from 8 to 18 cubic meters. And in its constructive a unique system of two-chamber vaporization.

Water in the Kamenka is served through a special funnel with a built-in dispenser, which will not "pour stones."

Kamenka Geyser 2014 Carbon today are available in the following modifications:

Gas furnaces thermoform

As already written above, the company Thermophore is produced by several models of gas chairs, which can be installed if gas has been carried out on your country site. Gas furnaces include Urengoy Inox, Urengoy Carbon, Inox Taimyr and Carbon Taimyr. They differ from each other with the material of manufacture and the recommended volume of the steam room, in which the furnaces will be used.

Below is the price table and the basic characteristics of gas furnaces:

Furnace model	Material of manufacture		Price
Urengoy Inox.	High-alloy steel (stainless steel)
Urengoy Carbon.
Taimyr inox	High carbon steel (stainless steel)
Taimyr Carbon.	Constructive carbon steel

All furnaces have a firebox specifically designed for burning natural gas. CARBON models all elements susceptible to increased thermal load are made with thickening, which allows you to extend the service life of the furnace. For each model, you can choose the most appropriate modification of the gas burner.

Anti-crisis ovens thermoform

As already mentioned at the beginning of this review, the thermophorence of the thermoform today is offered a line of budget furnaces for a bath at lower prices.

The price reduction is achieved by using instead of an expensive stainless steel carbon structural steel according to GOST 1050-88. Due to the fact that the structural steel is less resistant to scale formation, details exposed to a particularly strong thermal effects are made with an increase in thickness.

An increase in the thickness of the bottom and other elements practically does not affect heat production, but it can significantly increase the service life of the furnace.

Furnaces Thermofore from carbon steel have the designation of Carbon. If the name is CARBON in the title, then the furnace is designed from carbon steel according to GOST 1050-88.

Here is the price table for anti-crisis furnaces, shown on the official website of the thermophore. From the presented data, it is clearly visible to savings when purchasing each of the models of the company's proposed bath furnaces compared with the purchase of the same model from high-alloyed steel (stainless steel):

Anti-crisis stove	price, rub.	Savings, rub.	Savings,%
PB Angara 2012 Carbon Yes ZK Terracotta
PB Angara 2012 Carbon DN ZK Anthracite
PB Angara 2012 Carbon Viter ZK Anthracite
PB Angara 2012 Carbon Viter ZK then Anthracite
PB Gaiter 2014 Carbon Yes ZK Terracotta
PB Gaiter 2014 Carbon DN ZK Anthracite
PB Geyser 2014 Carbon DN ZK then Anthracite
PB Gaiter 2014 Carbon Viter ZK Anthracite
PB Geyser 2014 Carbon Viter ZK Terracotta
PB Geyser 2014 Carbon Viter ZK then Anthracite
PB Vitruvia Carbon BSE Anthracite HB
PB Vitruvia Carbon BSE then Anthracite HB
PB Kalina Carbon BSE Anthracite NV Pra
PB Sayan Carbon Yes
PB Sayan Carbon Viter
PB TUNGUSA 2011 carbon yes terracotta
PB TUNGUSA 2011 carbon day anthracite
PB Tunguska 2011 Carbon Viter Anthracite
PB Urengoy-2 Carbon BSE Anthracite HB
PB Taimyr Carbon BSE ZK Anthracite
PB Tunguska XXL 2013 carbon yes terracotta
PB TUNGUSA XXL 2013 Carbon Viter Anthracite

As you can see, in some cases, savings are 5,000 rubles, which, you see, a lot. Therefore, if you are constrained in the means, be sure to take care of the furnaces from the anti-crisis ruler, which will help you to save on their acquisition.

Installing the furnace thermoform in the bath

To create a reliable thrust and providing the heat-processed production company, their exploitation with a chimney with a height of at least 5 m is recommended. This height provides the creation of stable thrust due to the difference in the pressure of exhaust smoke gases and air inside the bath.

The decrease in this height can lead to the volatility of the thrust, a decrease in heat-producing, as well as to the hazard of the release of combustion products inwards, in which the furnace is installed (so-in tipping of traction).

When choosing a chimney, pay attention primarily to products of well-known manufacturers. Previously, we already wrote about the chimney of the chimney from sandwich pipes. If you have not read the advice given in the article, we recommend to get acquainted with them.

Before installing the furnace in the bath, it is necessary to protrude it outdoors to burn oils that are covered with metal parts for preservation and prevent corrosion when stored in stock.

Before you flood the oven, remove all protective films and promotional stickers.

If you purchased a furnace with a built-in heat exchanger or a self-type tank, you should fill them with water even with a preliminary extract on the street to prevent the exit of the furnace.

With a preliminary protest on the street, the oven should be equipped with several chimney segments to create thrust. Otherwise, the burning will be unstable or will not be able to ignite firewood in the furnace.

Before putting the furnace to the floor, you should take care of a reliable base, as the weight of the furnace with stones filled with hot water tank and firing, loaded by firewood, can reach 250 kg. The floor must be reinforced with additional enhanced lag. You can also take care of the device of a small additional foundation at the installation site of the furnace.

The thermoform furnace installation circuit in the steam room is shown below (click on the picture to enlarge):

Furnaces for Baths Thermophore were presented on the Russian market for quite a long time. This company is one of the first production in the country, both for home and modern, reliable stainless steel bath stoves. Today, we will look at the model range and technical characteristics of the coaching chairs of the company thermoform with heat exchanger and water tank.

We will also analyze their device, features of the design and connection of water on the example of the oven for the Bathi Tunguska, buyers for which are most often found.

Model range of thermophore bath stoves

Bath furnaces Thermophore is produced in different versions. Buyers are given a fairly wide selection and price, and on the heated volume of the steam room, and the design-size design of the Kamenka from the Novosibirsk company "Termofor".

1. Stove "Tunguska": Viter, XXL, XXL Viter.
2. Kamenki Kamenka "Angara" and "Angara 2012".
3. A furnace-fireplace for Bath "Kalina" and "Geyser 2014".
4. Budget Bath Furnaces "Compact" and "Shilka".

In stores we can meet inexpensive models for a small pair of 10-12 m3 - "compact" or "shill" with a built-in tank for heating the water located behind the oven.

Furnaces for Baths Thermophore

Good reviews have Kamenki Kalina and Angara 2012, which have a "fireplace effect", thanks to its large panoramic heat-resistant glass. Such fireplaces for the baths are capable not only to heat the pair of large volume up to 25-30 m3, but also an adjacent room, for example, a pre-banker, a washing or a room for recreation.

But the most popular in consumers still acquired models of the Tunguska series, due to their optimal set of functions and good value for money. We will analyze them in more detail.

Features Design Furnace for Baths Tunguska

The classic bunk bunch of Tunguska is capable of pumping a steam room with a volume of up to 16 m3. Like all stoves of the thermophore brand, the furnace furnace of the Tunguska model is made of heat-resistant stainless steel with a chromium content of 13%.

The branded steel door without glass has the property of self-forming from its outdoor side. Due to the in-depth structure of the heater, it is evenly warming up from all four sides. We look at the chart of the device of the classic Bath furnace Tunguska:

Internal device Bath furnace brand thermoform

1 - chimney
2 - convector
3 - remote channel for fuel
4 - Steel Door
5 - Zolnik
6 - Stones
7 - Enlarged Kamenka
8 - Flak.
9 - cast iron grate

All models are equipped with a cast-iron grate, which creates a good flame under the bottom layer of firewood. The convector of the stove-heater shields infrared radiation and gives the stream of hot air, evenly distributing it through the entire volume of the steam.

In addition, the model " Tunguska XXL.»Have an extended flue chamber, which makes it possible to use more than 50 cm long as fuel. And the Kamenka itself is more more than that of the classic" Tunguska ".

Model series " Viter"And" Viter XXL.»Designed for a bath with a steam room to 24 m3. These stoves have a door with a heat-resistant glass of the Schott Robax technology and the porthole, the size of 17.5 ', which allows us to visually enjoy live fire, while in the adjacent room with a steam room.

Bath furnace Tunguska with heat exchanger

All heat-stoves thermoform are designed not only for heating the steam room itself, but also to obtain hot water. This water is heated in the tank, which can be located:

- on the chimney pipe ("self-" type);
- on the wall (remote tank).

The water in the remote tank is heated due to the heat exchanger, which can be located either on the flue of the chimney pipe, or installed under the outer facing (convector) of the Kamenka stove itself.

The chimney heat exchanger must be purchased separately, and preferably from stainless steel. But this can not be done, but just buy a furnace for Bani Tunguska with a heat exchanger, which is already built into the stove with the side. We look at the connection scheme of the bath furnace with a built-in heat exchanger.

Furnace Connection Scheme Thermoform with Heat Exchanger

1 - chimney pipe
2 - stainless steel heat exchanger
3 - Stove-Kamenka
4 - remote tank cover
5 - water tank
6 - ball valve for selection of hot water
7 - three-way crane
8 - Pipes for Natural Water Circulation
9 - drain crane

This heat exchanger is a flat tank of a small volume having two threaded fittings with a diameter of 3/4 '. Tunguska oven with a heat exchanger has a universal connection both on the left and on the right side by transferring the heat exchanger to any comfortable side.

An important point is that it is possible to pull this furnace not only in the presence of water in a shirt, but without it. It is explained by the fact that the heat exchanger for water is not soldered into the design of the oven itself, and the heating in it occurs only through the walls of the contact of the water shirt and the heaters.

Water heating occurs in the heat exchanger with a melted heater. At the same time, the furnace should be at the lowest point of the steam room, and the remote tank at an altitude of 2 is 2.5 meters from the floor. Water heating in the circuit and the tank is achieved by natural circulation.

If the tank is hanging at an insufficient altitude, this circulation may not be, and, accordingly, water in the tank will be badly heated or not heated at all.

Connecting water to the heat exchanger is produced using steel water pipes or stainless steel pipes, as well as fittings. To simplify the installation of the Tunguska furnace, instead of pipes use flexible stainless steel with precipitated nuts with a diameter of 3/4 'and the corresponding length.

Tunguska furnace: Specifications, Dimensions

Technical characteristics of the stoves of Tunguska

Advantages of the oven for the Baths of Tunguska Thermophore brand

- Wide lineup;
- the housing of the furnaces is made of stainless steel with a chromium content of 13%;
- fast heating steam room;
- light weight oven;
- reliability;
- Universal installation of the heat exchanger.

Disadvantages of bath furnaces thermoform

- high price;
- The absence in the assortment of stainless steel furnaces with thickness has become more than 3 mm.

On the stove for Baths Thermophore Customer Reviews, mostly meet positive. This can be easily explained, for the advantages of this oven clearly exceed its disadvantages. If you decide the oven for the bath from the company Thermophore, you will get an easy, reliable and modern heating unit that you should serve for many years. Watch video review.

The manufacturing company Thermophore, which emerged in 2003 is one of the leading Russian firms in the heating equipment market. Right from Siberian frosts founders of the brand know a sense in high-quality housing heating with minimal fuel costs and related expense articles. A wide range of furnaces produced, which has many positive feedback from product owners, will be able to please and satisfy the needs of any consumer.

The entire line of goods of the company Thermophore is adapted to Russian climatic conditions, so the devices easily carry seasonal temperature differences and even the most tall frosts. The use of heat-resistant steel and chromic compounds in the composition of the hull alloy provides equipment strength, durability and high level of efficiency. In addition, all furnaces are equipped with a double burning device, which significantly reduces the heating time of the room and thereby allow economically to consume fuel.

The thermoform devices are mostly compact sizes and a small weight, which, in most cases, does not require the enhancement of the foundation. They can be applied both in private and public premises.

The benefits of operation of the oven furnaces can be attributed:

1. Convenience and safety in operation - self-reserved design of the furnace door prevents burns. And if you additionally equip it with a screen of heat-resistant glass, a wonderful opportunity appears to admire the open flame.

2. Reliability and durability of the design of the equipment guaranteed by the manufacturer long service life.

3. Reviews of many owners indicate the price category of devices available to the average consumer.

4. Thanks to ergonomic design, as well as the possibility of execution in various colors, the stove Thermophore will also serve as an excellent designer solution.

From the disadvantages, perhaps, it is possible to note errors in the manufacturer's marketing company, when the desires of illiterate consumers in the field of heating equipment are not converged with the proposed assortment.

The type of food is distinguished by thermoform stoves:

• electrical;
• gas;
• solid fuel.

Bath stoves

For Russian bath and sauna. Include the following rules:

1. Aurora - an overall furnace for the room at 8-18 m3. Built-in casing-convector blocks from rigid infrared radiation. The model is characterized by an illuminator mounted in the rear wall, allowing you to admire the flame tongues from the steam room. There are examples with a heat exchanger and a panoramic door of a thermal station. The modification of Aurora XXL is highlighted by an extended firebox to 61 liters, and, accordingly, greater power.

2. Angara - furnace with a furnace designed for 51 liters for a pair of 8-18 m3. Equipped with a vortex heat exchanger, an expanding fuel channel is adapted in options with the screen. Thermoforn Angara 2012 in the package of carbon and inox - made of steel or heat-resistant chromium alloy, respectively. They differ from the prototype with an updated heat exchanger, the possibility of connecting to the gas pipeline.

3. Barrel - a wood stove-barrel - the original design solution and design features allow you to be equally successfully used as a furnace for a bath and sauna. It accommodates a 42 liter furnace for the room at 8-18 m3. A weighty stone tab and an enlarged thickness of the elements - characteristics that allocate this model.

4. Biryusa 2013 is the classic version of the Kamenka stove in modern interpretation with the built-in water tank. The updated convection flow scheme ensures the prevention of water overheating, and the closed heater produces maximum heating and ease of the vapor. Thanks to small dimensions, it is suitable in any space.

5. Vitruvia - combines all the qualities of the oven thermophore bath in itself, as well as a full fireplace, having a panoramic thermopront screen with a diagonal of 58 cm. Thanks to the extended furnace of up to 63 liters of lamps, it is available here and along and across. There is in variations of carbon and inox with stainless steel inserts either with the presence of heat exchanger.

6. The bath oven Geyser Thermophore 2014 is characterized by a two-stage vaporization system. Released in Carbon and Inox models. Equipped with a comfortable funnel with a dispenser for water supply, while the preheated steam at the output will make the sound, similar to the noise of the natural geyser. The modifications have a built-in heat exchanger and a panoramic door.

7. GEKLA - Variation of the Firm of the Termore Business Class. Such a furnace easily heels the room of a public bath or sauna in 30-40 and more m3. The bulk firebox is 109 liters, a two-row heat exchanger, the vertical exhaust of the steam provide high efficiency of the instrument. There is a design with a built-in porthole to observe the burning of the pair.

8. Kalina - The oven the thermophore of the premium class is the perfect combination of powerful heating and fireplace design. Produced in versions of Carbon and InOX with a built-in heat exchanger. The fuel tank at 79 liters is designed for a steam room at 18-30 m3, and a wide fuel can be comfortable to observe the flame.

9. Compact 2013 - a budget version of the Kamenka Thermophore, which can effectively heat a small pair of 6-12 m3. It is manufactured in the types of Carbon and InOX with a roomy furnace for 42 liters. Also has its own modifications:

• with stainless steel door;
• with a shortened fuel channel to save free space in steam room;
• base, with a shortened firebox;
• with an elevated water tank;
• with a transparent screen with a diagonal of 42 cm.

10. The OSA is the most small and affordable wood-burning furnace Hemofore. It is capable of providing heat a small pair of 4-9 m3. The volume of the firebox is 26 liters. Available in two models to choose from: carbon and inox. There is a modification with a shortened fuel channel - such a device is necessary when the washing and the steam room is aligned into one room.

11. Primavat - Electropamental furnace for a bath and sauna thermoform. It can boast of small size, such a device is allowed to be installed even at home on an area of \u200b\u200b5-8 m3. It has a wall mount and remote control.

12. Sayans - a bath oven with the original design in the form of a barrel type stove-grid. It is characterized by quite a long warming of stones and rooms with a volume of 8 to 18 m3. There are options for Carbon and InOx with a fuel tank of 36.5 liters. As well as several modifications and the auditer with a built-in transparent screen with a diagonal of 42 cm.

Released Sayan equipment has additional varieties:

• Sayani mini is characterized by a smaller amount of firebox on 26 liters and heated with a power of 4-9 m3.
• The Sayans of the XXL 2015 of the Witer have a firebox by 36 liters, capable of damping the room at 12-24 m3. There is a modification of the furnace with the heat exchanger.

13. Spearbank 2012 - Thermofore steam equipment for the arrangement of the Russian bath 10-18 m3. Built-in tank on 40 liters of water and structural features, allowing to produce an unlimited amount of superheated steam.

14. Taimyr - Gas version of Kamenka Angara 2012 with all its characteristics. In stock Carbon and INOX configuration.

15. Tunguska 2011 - the classic oven is one of the prototypes of the company Thermophore. It is manufactured in a wide range of variations, including Carbon and InOX. Suitable for medium-sized steam rooms. Improved by thickened parts of the furnace and stringers from heat-resistant steel. Tunguska XXL 2013 is a restyled version of 2013. It is allocated from the basic configuration by significantly advanced dimensions and furnace sizes.

16. Urengoy - Gas equipment for a bath designed on the basis of a compact furnace and repeats all its technical characteristics. There is in the variations of Carbon and InOx.

House heating

1. Aquarius is a complete fireplace furnace with a built-in water heating mechanism. Equipped with special protection from the soot so that through the door is always without interference to watch the tribe.

2. The harmonica is a compact furnace-fireplace for the room at 100 m3. Of the features - the regular podium above the floor level.

3. GERE - a small cap baking oven, suitable for both heating and to heal food.

4. Hydraulick - line of water boilers of various power and modifications to connect water heating.

5. The gymnasium is a wood-burning oven for the room for no more than 100 m3.

6. Cinderella is the most miniature model with a cooking panel, but no less functional. In addition to heating, it makes it possible to prepare and warming up food.

7. Normal is a classic system. It has in its arsenal Normal 2 turbo - a mixture of a wood and electric furnace.

8. Fire-battery - a series of devices of a new generation, various power and design, in shape resembling a heating radiator.

9. Pragmatik - Long burning furnaces for heating residential and non-residential premises with a total of up to 500 m3. Unpretentious to fuel material.

10. Professor - overall furnaces of long burning thermoform, intended for a country house over 1000 m3. There is a variation with coal fuel.

11. Selenga - furnace for a house with a cooking panel, made in the original oriental design.

12. Series student and engineer - stoves on firewood or coals. They have differences in the presence of a cast-iron and steel door. Designed for 150 m3 heated space. They differ from each other with dimensions and the size of the thermal station.

13. Statics - a line of heating and cooking systems mimicted under the vintage fireplaces are varied in geometric proportions.

14. Tashkent - heating and at the same time water-heating boilers on solid fuel.

Portable models

1. The brazier is frozard with elegant design.

2. Mangal Myrtudmai - Collapsible design for relaxing in nature.

3. Avoska - Portable thermoform aggregate with a cooking panel.

4. Doupelet is an original design in the form of a spacecate in a coupe with a cooking panel.

5. Indigir - the unique invention of the manufacturer - the electric generating wood heating and cooking system. During operation, the built-in thermoelectrogenerator heats up and produces a current in 12 V.

Ownership views

Negative feedback on the company practically does not find places. In confirmation below, some of the consumer opinions about thermoform products are given.

"The owner of the furnace Kalina Thermophore is already 5 years old, it will be perfectly! The steamer to 100 ° C is easily heated in an hour. No additional investments required. Without difficulty mounted in chimney. It is easy enough, and, most importantly, the observation of fire fascinates, like a real fireplace. The producer was bored for glory. I am satisfied with everyone. "

Konstantin, Moscow.

"From a detailed review of the equipment found the desired model for itself. I installed without difficulty, even the water tank was additionally not necessary to buy. As they say, the perfect combination of price-quality. According to the manufacturer's description, a long service life is also promised. In its own experience, I was convinced that the thermophore is worth the products. Highly recommend!".

Valentine, St. Petersburg.

"To purchase a firm of the firm Thermophore feathers numerous laudatory reviews. Siberian reliability and guaranteed lifelong service life, acceptable price and excellent quality - all this is inserted in one device. It easily got into place of the old stove, but what interesting design, and more powerful and more economical than the previous one. Now they get parked more often and with great pleasure. "

Marina Globin, Novosibirsk.

"Long selected the desired unit for the country house. I wanted something at a high heating rate and economical on firewood. I decided to buy thermoform and I do not regret it to this day. The stove fell in harmoniously in the interior. In fact, it performs three main functions: the house heats, the food is prepared, and a fireplace appeared in our dwelling. After the working day, you can relax, meditating in front of the fire. "

Stanislav, Yekaterinburg.

The cost of thermoform

To buy thermoform furnace equipment is possible at the prices specified in the table below.

Name	Dimensions, mm.	Price, ruble
CARBON OSA Yes Chocolate	660x415x605	8000
Sayans inox yes	790x600x715	20000
Sayany mini carbon yes	740x525x610	14000
Sayans XXL 2015 Carbon Viter ZK	865x680x920.	30000
CD 2013 carbon day anthracite	730x415x705.	11000
Aurora INOX Yes Porthy Terracotta	830x415x790.	17000
Aurora XXL INOX Yes Porthy Anthracite HB	415x990x790.	22000
Angara INOX Yes That Anthracite HB	830x415x790.	18000
Witruvia INOX BSE TORRACOT	665x680x785.	25000
Geyser 2014 CARBON DN ZK then Anthracite	830x415x900.	20000
Gekla INOX BSE ZK Anthracite NV	940x590x1110	70000
Primavolt	415x390x600.	12000
Tunguska XXL 2013 Carbon Viter	990x415x810	22000
Gymnasist	530x370x780.	11000
Engineer CHA, SK, TV	765x440x895.	20000
Aquarius	515x690x930.	30000
Cinderella	465x300x460	7000