Laminate share. How to find out how many squares in a pack of laminate? What will learn the weight of laminate

Conducting repair work it is necessary to remember that the main load always falls on the floor covering. If we talk about the field from the laminate, then so that it serves longer, under the lamellae is laying the substrate, they use self-leveling mixtures with a roughing device.

These mixes are able to make a screed perfect smooth, level all sorts of floor irregularities - bugs and pit. All this contributes to the extension of life.

Important! Before buying a laminate for finishing coating, it is necessary to calculate its quantity.

Bad if there is a lot of unused material, even worse if it is not enough. Knowing the area of \u200b\u200bthe intended coating in square meters, as well as the number of boards in the package, the area of \u200b\u200beach lamella, can be calculated exactly how many packages will be required for repair.

Weight bunch of laminate

Laminate boards are of different sizes. Their size determines the magnitude of the pack. The boards are rectangular, they have their own height, width, length. It is for these indicators to watch, buying a laminate.

The height is an indicator of the thickness of the board. It varies from 6 to 12 millimeters. It is believed that the best board of 8 millimeters, professionals like to work with them. Such planks produce all manufacturers without exception. They have very good characteristics:

These boards are the same, deviations in size are insignificant.
With such height boards, the installation process is simplified.
Paul from such boards are warmer than others, as they have a low thermal conductivity.
The feet of the furniture are not terrible with such a floor, the traces do not leave.

Length is also different. Options from 126 to 138 centimeters. This is facing the standard. There are exceptions, but they are rare enough. Possible boards up to 185 centimeters. This is a complex material, only specialists can work with it. The screed must be particularly smooth for the boards of such a length, the desired result is difficult to achieve, the requirements are presented high. In addition, the installation itself is very complicated.

Important! Before the final choice, you need to look at the room where the laminate will be taken. It is his value that must be the main criterion of the length of the boards. The material may be longer if the room is spacious, and for a small area it is worth choosing short laminate laminate.

Width, naturally, also varies.

The width of narrow boards is 9 cm. They mimic the parquet. There are boards 33 cm wide, imitating tiles. Sometimes lovers of these coatings can be content with imitation. The most naturally laid the floor laid out about 20 centimeters. This is the most popular type of laminate floor.
The weight of the packing material is different from different manufacturers. The average is from 15 to 17 kg. This coating is enough for 2- 2.5 square meters of floor. In packing 8 boards, 15-20 centimeters wide and 110-120 centimeters long.
The exact weight of the packaging is impossible to say, as already mentioned, there is a big dependence on the manufacturer. There are many lamellae with identical lengths of length and widths, and there is also a lot, with the parameters that are highly different. Weight can be found when buying. On a pack with lamellas on the end it is indicated exactly
You can count about all at home, but it can make specialists in the shop when buying. The main thing is to know the area of \u200b\u200bthe room, this parameter must provide the buyer. The rest will take into account the sellers - all that is important to the client - the weight required by the quantity. Report height, length, width of material.

How many laminate in one pack?

In a pack of laminate, it is usually 8 - 10 boards, it is enough for a very approximately on 2 square meters of the floor. If the room where the laying of the coating is planned, has an area of \u200b\u200b12 square meters, then it is necessary to purchase 6-7 packages.

Material should be bought with a margin. First, damage to the lamella during installation is possible. Even the experienced wizard can happen. Secondly, it is necessary to leave the lamella to repair with the replacement of the board subsequently as possible and possible damage.

Helpful information! It is clear that in a pack of 8 lanes can not. As already mentioned, it depends on the manufacturer. But even one manufacturer package sizes can be different depending on the collection.

These manufacturers include KronoStar, Kronospan, Kronoflooring , Quick-Step,Tarkett. etc. There may be 4 boards in their packages, maybe 10. It happens 5, and 6, and 7, and so on. About an unequivocal answer is not to speak. There are manufacturers who always, regardless of the collection, the lamellas are about the same. For example, Krono Original. . But here the number of boards in the package can be varied. This manufacturer has 7 and 9 in different collections.

The question "how much a square meter of laminate" can be often heard from buyers who are accustomed to choose from building materials as serious as possible. The mass of laminated coating is an important indicator, directly determining the additional load on the floor of the city apartment and the foundation of the country house. In addition, weight is important for calculating the option and the sum of the delivery of the selected material. In this article we will look at how to calculate the weight of the laminate, and from what it depends.

How to calculate the weight of laminate

To begin with, remember how the laminated floor is arranged. This is a four-layer sandwich: overlay, decor, base, balancer. The bulk is accounted for on wood slab elevated, HDF, or medium, MDF, density. It consists of a compressed chopped tree.

In a dry condition, the cubic meter of such a stove weighs 750 to 1000 kg. It depends on the class of laminated gender and its thickness. The thinner the board, the more dense material. Consider on the example of Kronospan laminate.

Kronospan Castello 32 class 8 mm thick - 929 kg / m3, and for Victoria, a thickness of 7 mm - 965 kg / m3.
The QUICK STYLE 3 class collection is a thickness of 10 mm - 867 kg / m3, and Forte 33 class with a thin floor of 8 mm - 900 kg / m3.

How to calculate the density of laminate, knowing the lot of packaging?

Laminate usually has a HDF density of at least 870 kg / m3. It is determined.

1. We read on the packaging of laminate mass. For example, 15 kg.

2. We look at the area for which one packaging is enough - 2.22 m2.

3. Determine the thickness of the board (also indicated on the package) - 7 mm, which means 0.007 m.

4. We divide the mass of packaging sequentially on the area and the thickness of the board: 15 / 2.22 / 0.007 \u003d 965 kg / m3. The strength of the board with a margin!

When manufacturers are used for the manufacture of floors less dense material, its price becomes lower, but also the strength decreases. For example, if the weight of one cubic meter of the laminated plate is less than 800 kg, then it can be used by female heels with studs.

Density is not directly related to the quality of laminate. Manufacturers in different ways ensure the strength of the lamella. Therefore, in priority when choosing, the class of strength 31-34 and the wear resistance of AC.

It is worth noting that the strength of the board also affects the transparent laminating coating - overlay and the lower part of the lamella - the balancer. But Overley is more associated with wear resistance, and the balancer - with the protection of the lamella from moisture from the bottom and decrease the deflection of the floorboard when walking.

How to calculate the weight of the laminate packaging, knowing the density?

This is the inverse task. If the manufacturer only indicated the density of HDF, then we consider the packaging weight so. Example for Classen Force.

1. Find in the product card on our website area for which packaging is enough, 1.996 m2.

2. Take the height of the lamella, 8 mm \u003d 0.008 m.

3. Multiply the density of 870 kg / m3 sequentially on the packaging area and the thickness of the lamella: 870 × 1,996 '0.008 \u003d 13.9 kg.

If there is no density data, then you can take an approximate value of 900 kg / m3. This corresponds to the majority of modern collections 32, 33 and 34 class. Special accuracy in such calculations is not required. For our example at 900 kg / m3 we obtain the weight of the pack 14.4 kg. The difference is only 0.5 kg.

How much is one square meter of laminate?

1. As a product of the material density to the height of the lamella, expressed in meters: 870 × 0.008 \u003d 6.96 kg.

2. The ratio of the mass of the box to the square to which it is enough: 13.9 / 1,996 \u003d 6.96 kg.

How to calculate the weight of laminate for the room?

This task is also simple. Example for room 24 m2 (4 to 6 meters).

If we know the weight of the packaging (13.9 kg) and the area for which it is enough (1,996 m2), then simply divide the area of \u200b\u200bthe room to the packaging area and multiply on its weight: 24 / 1.996 × 13.9 \u003d 167 kg.
If we are known only to the density (870 kg / m3) and the thickness of the lamella (8 mm \u003d 0.008 m), then it turns out the area of \u200b\u200bthe room, the thickness of the floor and the density: 24 × 0.008 × 870 \u003d 167 kg.

With a lack of data on the package or in the online store catalog, it is also possible to take 900 kg / m3 and the thickness of the lamella 8 mm.

What can we compare the weight of the laminate?

So, the weight of one square meter of laminated floor is not more than 8 kg. Compare this with other floor coatings.

Linoleum - 1.25-2.25 kg / m2.
Wooden boards with a thickness of 10 mm - 7.8 kg (value for oak).
Plywood with a thickness of 10 mm - 7.5 kg (birch), 6.5 kg (spruce).

Thus, the laminate is comparable by weight with plywood of the same thickness.

What affects the weight of laminate

First of all, the mass of laminated sex is affected by humidity in the room. What it is higher, the greater the weight of the floor. This dependence is not so noticeable as for natural wooden boards, but still pronounced.

For the weight of the packaging does not change from humidity, manufacturers before sending to the trading network hermetically sealed it. Therefore, before laying in the room, it is necessary to withstand the laminate in open boxes at least 24, and better - 48, hours so that the moisture in the lamellae is leveled with moisture content in the air.

Buy laminate of European and domestic manufacturers in Moscow and delivery area can be in BSPOL. At your service professional managers. They will answer any technical questions about this practical and beautiful floor covering, laying and care for it.

Many are interested in the cost of one packaging of the laminate and from which the manufacturers are repelled by setting the price. Everything is very simple, you need to pay attention to the design and dimensions of the panels.

Each manufacturer has its own standards for the price category. In most cases, laminate parameters differ from each other from one manufacturer. This is due to the fact that each type of panels has a different class of wear resistance, weight and thickness of the panels.

Therefore, it is important to know What such products consist of. In addition, for more interest, you can view a video video to find out what manufacturers are guided by plants by setting the price of laminate.

One QUICK-STER laminate packaging, which refers to 32 class, weighs 12 kilograms.

A special wear-resistant layer of transparent color is applied on top to the laminated board. It is responsible for the abrasability of the surface of the panel and the classity of the goods. The coating is made of melamine resin. Corundum is added to the glossy version of acrylic, which gives a gentle acrylo of the necessary hardness. The stability of the coating depends on the thickness of the layer, but it does not affect the weight of the laminate packaging.
The layer decorative is performed from paper, which according to the RAL table can have any color and drawing, depending on the manufacturer's imagination. But in most cases, produces produced laminate with a pattern imitating natural materials, including wood, stone, granite, marble, sand, etc. Such characteristics of the material practically do not affect its price.
Under the decorative layer is placed in the moisture-proof film, which is designed to protect the lowest HDF slab. Such waterproofing plays an important role in the panels. The film reliably protects the material from moisture, even randomly spilled water will not affect the structure of the laminated floor within three days. Such strong protection is not on all variants of the laminate, although many manufacturers improve their products. Find out, there is a defense material, you can learn from the instructions attached to the package.
Four figures in the figure marked the stabilizing part of the panel, which is made of high-strength board DVP. It is important to know that the HDF marking is a label of the European Producer Association. It affects the dimensions, the weight of the packaging of laminate and each panel separately. It depends on the thickness of the same panel, its strength and quality of the castle embedded around the perimeter, its triggering.
The panel is located on the panel, which, in turn, is intended to protect the stabilizing layer from the raw floor, which laminated laminated panels. This layer typically contains full information about the laminate, its parameters, characteristics, classity and other parts are indicated. Some manufacturers equip their products with an additional layer, that is, a substrate that slightly affects the weight of the floor covering.

Trying to understand what manufacturers are guided by installing the price for the laminate packaging, its weight or other characteristics, it is important to know that neither the weight nor the dimensions of the laminated coating do not affect its installation. Therefore, choosing this floor covering does not need to pay special attention to weight or packaging dimensions. At the same time, it costs to say that the packaging is not at all difficult, it will easily raise even a teenager, not that adult man.

Different types of laminated panels may have dimensions that differ significantly from each other. For example, take the table in which the panels are located, depending on its size.

It is important to knowthat the weight of 1 square meter of laminate does not affect their area, which cannot be said about the thickness. From the amount of consumable material on the manufacture of one panel, not only its weight, but also the weight of the entire packaging is depeted.

As a result, the mass of the panel depends on the amount of materials included in its composition. Most often, manufacturers pack per pack of 8 panels, although sometimes packaging packs of 6 pieces are found.

Wearness-resistance classes.

As it is known, laminate is also distinguished by the volatility of wear resistance. For example, the panel of the Chinese manufacturer may have a thickness of 8 mm., 10 mm, or 12 mm., Depending on the class of wear resistance.

Everyone perfectly understood that the panels having a thickness of 8 mm., Will weigh less than similar panels of another thickness. The parameters of laminated boards are usually indicated on the package, including its mass, in general, so you can find out the weight of one panel will not be difficult.

For this, the weight of the packaging is enough to divide the number of panels in it. Usually one packaging weighs at least 12 kg. And no more than 17 kg.

Helpful information! You can try to calculate the weight of the 33 class laminate, which has the following parameters: 1280 * 240 * 12 mm and a lot of packing of 17.4 kg, packaging 8 pieces. Knowing such parameters, calculated the weight of the panel is very simple - 17.4 / 8 \u003d 2,175 kg. Such calculations can be carried out with any packaging of laminate, regardless of its size and brand.

If we take into account that thick panels relate to a high class of wear resistance, their weight will also increase as well as positive characteristics. Thus, the installation of laminated coating will be significantly simplified and its service life will last.

Conclusion.

Summing up the foregoing, it is worth mentioning that heavier and thick panels have many advantages in front of light analogues. They are heavy because castles are embedded in HDF throughout the perimeter.

From the width of the lock depends high-quality and its correct operation when installing the floor covering. The advantage of such panels is that when docking, they practically do not form gaps.

But if they are all, it is possible to close them with the help of an ordinary hammer, and it is very easy and simple.

The laminated floor is attractive and by simplicity of installation, and due to wear resistance, and decent durability. However, all these qualities depend largely or lesser extent from the thickness of the board. The latter, in essence, determines how much material weighs.

The structure of the laminated board

In contrast to the usual boards, the laminate is a composite material, that is, consisting of several layers of different material, which together and form all properties of the finished coating.

Nizhny - is made of cleaved paper, which serves as a kind of stabilizer: The material does not allow moisture to get to a more sensitive main layer. In some cases, the product includes a finished substrate.
Medium - the main one. This is a layer of high strength chipboard, which determines the rigidity, reliability and stability of the structure. It depends on how much a bundle of laminate.

The thickness of the main layer is 8 mm, 12 mm, also determines the strength of the docking and reliability of the floor. At a low magnitude, the lock turns out to be narrow and the connection strength does not provide. The thickness of 8 mm is optimal: while the castle is reliable, and the weight is small.

Decorative layer - paper or special furniture foil, which reproduces the color and structure of the tree, marble, granite, ceramic tiles and other things.
Protective - layer of melamine or acrylic resin thickness from 0.2 to 0.6 mm. It warns moisture from entering and ensures resistance to abrasion of the surface.

From the totality of all factors, since the structure determines the product category - 32 class, grade 31, depends on how much laminate packaging weighs.

Number of boards in pack

Putting size determine the dimensions of the board itself. It is quite difficult to link with a square meter, since it will take different amounts of material to cover such an area.

However, knowing the mass of the material, you can find out how much laminate 3 class, 32 class, with a substrate or without.

Thickness - with other equal parameters, this indicator determines the mass of the material, and it means that the weight of the packaging. The most popular is 8 mm - the usual thickness for 32 class or 33 of the class. 12 mm is more common in 34 class or high strength material. How many laminate bundle weighs in 8 mm, define other parameters.
Length - ranges from 1220 to 1380 mm, although there are instances and up to 1850 cm long. With such lamellas, it is much more difficult to work. But for the coating of the square meter of the boards, it takes a bit.
The width is one-graded, biscordal, material that imitating the parquet module will differ much noticeably in width. So, narrow dies playing parquet laying are usually 9 cm wide, and duplicate ceramic tiles - up to 33 cm. The most popular is the width of 18.5-19.5 cm.

The combination of all factors and defines the number of boards in the box. This is usually 8-9 pieces, but it happens 6, and 12 pcs, depending on the dimensions of the dice. In the photo - laminated material.

How many laminate weighs 8 mm

In everyday life, 33 class material turns out to be the most massive. However, the weight of one board is never indicated in the documents. On the packaging of the material indicate the mass of the box. Based on this data and determines the weight of one dice and the mass of the coating area in the square meter.

From different manufacturers the thickness of the material is different, and therefore the mass will be different. There is no one definite value here.

Let 3 grade laminate packaging include 8 bands and has a mass of 17.4 kg. The weight of one board is determined by the usual division: 17.4 / 8 \u003d 2,175 kg. It is possible to calculate in this way can a lot of any material, since the weight and size of the markboard on the marking.

pol.info-potolki.ru.

Quick Step Classic.	979	12,5 (7)	0,001824
Magnat.	977	22,5 (8)	0,00256
Tarkett Lamiart.	923	14,8 (8)	0,002005184
Tarkett Vintage.	923	14,8 (8)	0,002005184
Floorwood Brilliance	918	16,44 (9)	0,00198912
Floorwood Prestige.	913	12,66 (8)	0,00173328
CLASSEN PROGRESSIVE	911	15 (10)	0,00164608
Kronostar Superior.	909	15,5 (8)	0,00213072
Egger Classic 32.	901	14,3 (8)	0,001984512
Egger Classic 33.	901	14,3 (8)	0,001984512
Floorwood City.	901	16 (9)	0,00197376
Floorwood Optimum	896	15,5 (9)	0,001921764
Floorwood Benelux	892	14,5 (12)	0,001353936
Laminels Kuban	892	15,2 (8)	0,00213072
Laminels Siberia	892	15,2 (8)	0,00213072
Floorwood Renaissance	889	17,5 (8)	0,002461472
Floorwood Profile	880	15 (8)	0,00213072
Kronostar Favorit.	880	15 (8)	0,00213072
Floorpan Black	854	14,56 (8)	0,00213072
Floorpan Red	854	14,56 (8)	0,00213072
Tarkett Cinema.	850	13,63 (8)	0,002005184
Tarkett Holiday	850	13,63 (8)	0,002005184
Kronospan Castello.	844	15 (9)	0,00197376
Kronospan QuickStyle	844	15 (9)	0,00197376

wikiweight.info.

Laminate 33 class characteristics

home ⇒ Building ⇒ Finishing ⇒ Laminate

The most popular 3 grade laminate board has a length of 1380 (mm), width 193 (mm), thickness 10 (mm), its mass is about 1.186 (kg).

Possible mass of 3 grade laminate:

The laminate parameters of this wear resistance class are not standardized and depend on a particular manufacturer. The size of the board is indicated in the format "Length / Width / Thickness". The most common models are:

Board 1380x193x10 (mm) - 1.186 (kg), packaging weight of 7 pieces - 8.3 (kg).
Board 1286x194x12 (mm) - 2.075 (kg), packaging weight of 6 pieces - 12.45 (kg).
Board 1380x191x8 (mm) - 0.889 (kg), packaging weight of 8 pieces - 7.112 (kg).
Board 1286x160x12 (mm) - 1.063 (kg), packaging weight of 8 pieces - 8.505 (kg).

Important: Most manufacturers produce 33 class laminate packs containing from 7 to 10 boards, weighs the packaging from 7 to 18 (kg).

Important: Formula for calculating weight: Length x Width x Thickness x Density.

Table of density of laminate on brands Brand Title Brand Density Plate Density in (kg / m3) Packaging Packing Mass, in brackets Number of panels (kg) Volume Panel volume in (m3)

Quick Step Classic.	979	12,5 (7)	0,001824
Magnat.	977	22,5 (8)	0,00256
Ritter Hannibal	953	17,2 (6)	0,003008544
Ritter Karl Great	953	17,2 (6)	0,003008544
Ritter Peter 1.	953	17,2 (6)	0,003008544
Ritter Harald Stern	953	17,2 (6)	0,003008544
Brilliant.	929	19,5 (6)	0,0034992
Tarkett Lamiart.	923	14,8 (8)	0,002005184
Tarkett Vintage.	923	14,8 (8)	0,002005184
Ritter George Victorian	922	15,4 (8)	0,002088576
Ritter Maya.	922	15,4 (8)	0,002088576
Ritter Nefertiti	922	15,4 (8)	0,002088576
Ritter Justinian Great	922	15,4 (8)	0,002088576
Floorwood Brilliance	918	16,44 (9)	0,00198912
Floorwood Prestige.	913	12,66 (8)	0,00173328
CLASSEN PROGRESSIVE	911	15 (10)	0,00164608
Kronostar Superior.	909	15,5 (8)	0,00213072
Egger Classic 32.	901	14,3 (8)	0,001984512
Egger Classic 33.	901	14,3 (8)	0,001984512
Floorwood Deluxe.	901	16 (6)	0,00296064
Floorwood City.	901	16 (9)	0,00197376
QUICK STEP CREO.	901	11,5 (8)	0,001596
Floorwood Optimum	896	15,5 (9)	0,001921764
Kronostar Family.	894	15 (9)	0,00186438
Floorwood Benelux	892	14,5 (12)	0,001353936
Laminels Kuban	892	15,2 (8)	0,00213072
Laminels Siberia	892	15,2 (8)	0,00213072
Floorwood Renaissance	889	17,5 (8)	0,002461472
Versale RoyalStyle.	885	25,5 (5)	0,00576
Floorwood Profile	880	15 (8)	0,00213072
Kronostar Favorit.	880	15 (8)	0,00213072
Kronospan ultimate	869	15 (7)	0,0024672
Floorwood Serious	863	18 (10)	0,00208494
Floorpan Purple.	859	13,73 (10)	0,00159804
Floorpan Black	854	14,56 (8)	0,00213072
Floorpan Red	854	14,56 (8)	0,00213072
Floorwood Real.	854	15,4 (9)	0,00200475
Tarkett Navigator	850	12,78 (5)	0,003007776
Tarkett Cinema.	850	13,63 (8)	0,002005184
Tarkett Holiday	850	13,63 (8)	0,002005184
Kronospan Castello.	844	15 (9)	0,00197376
Kronospan QuickStyle	844	15 (9)	0,00197376
Tarkett Artisan.	844	13,33 (7)	0,002255832
Tarkett Estetica.	844	13,33 (7)	0,002255832

Laminate is a wonderful floor covering, filling the house with coolest and warmth, while emitting elegance and style. The material is made in the countless number of shades and textures, so that for each room you can find your ideal option, easily combined with furniture and color solutions. We picked up 90 photos for you, which reflect all the versatility of the laminate.

Laminate is a multi-layer material. The top layer forms a film, actually, and the name of the coating. This high-strength material ensures the strength of the laminate board. The basis of the laminate is the middle layer - DVP (wood-fiber plate), made under high pressure. Special paper impregnated with resins is used as the bottom layer of the board. Its functions are the protection of the DVP from moisture and the stabilization of the entire design. In the production of a laminate board, all three layers are connected under the influence of high temperatures and pressure.

Pluses of laminate

Strength. Due to the wear-resistant surface in combination with a rigid core laminate is very resistant to wear.

Water resistance. Unlike parquet board, laminate relative to waters. The upper and lower layers reliably protect the wooden core from the penetration of water. If it still managed to leak, then the middle, wooden, layer is saturated with resins, in some extent protecting it from the destructive effects of water.

Strams resistance. The laminated board will withstand blows and high heels, and suddenly falling objects, as well as the pressure of heavy furniture.

Scratch resistance. In the laminate, scratches are not formed from the wheels of office chairs, nor from the legs of the stools moved.

Pollution resistance. Not only traces of marker or lipstick, but even such a serious pollution, as the traces of nail polish are removed very simply: it is enough to spend the stain with a clean cloth impregnated with acetone.

Easy masonry. No need to possess any special skills to put the laminate. In addition, the material does not require grinding, no cyclovka.

Laminate is easily placed

Laminate has another positive side: with all its strength, it looks like a natural tree. Most often in the look of laminate not distinguish from the parquet board. If you wish, you can find the models of the laminate boards, which are repeated not only in color, but also texture of the tree, for example, in the online store Msklaminat.ru. There are also models of laminate under the tile: on the one hand, they fit perfectly into the interior of the kitchen or hallway, on the other - retain heat and comfort of wood.

Laminate under oak with a pronounced texture

Laminate under the tile in the kitchen interior

Laminate in the classic interior

Laminate in the interior of the living room

Shopping Hall with laminate coating

Gentle interior design with white laminate on the floor

Laminate in the interior of the hallway

Top 13.03.2017

Floor coatings in the modern market are presented in a large assortment. But, anyway, laminate uses extremely popular. It has many shades, has a low cost, while quite practical, reliable option. But his service life can be different. It depends on various factors: wear resistance, price, manufacturer, coating care and timely processing. Consider the life of the laminate of various wear resistance classes, tips, how to increase the indicator.

What is laminate

In order to find a really high-quality material that will last your home for a long time, you should learn from what each floor layer should consist of. In this case, you can check its quality. So, the modern floor covering consists of such main layers:

Decorative layer. This is the upper surface, it consists of a special film based on the melamine resin. It is this material that protects the surface from possible deformations, as well as high humidity and temperature. During the choice, pay special attention to this coating, the durability of the application depends on it;
The main layer can be of two types: based on Fiberboard (fiberboard) and chipboard (chipstone). Each option has drawbacks and advantages. It is best to choose fiberboard, as the material is more durable, dense. This will help to withstand almost all loads that are produced on it;
Water-repellent impregnation. The durability of the finishing material also depends on its quality, especially if it is used in a room with high humidity. The composition should not have substances harmful to humans, this factor can be checked in certificates to the material.

Characteristics 31 and 32 Class

As already mentioned, the service life of the presented floor covering depends on which the wear resistance class is selected. So, if you decide to choose a class 31 laminate, you can count on service life from 2 to 10 years. It all depends on the operation of the coating and the manufacturer. Experts recommend choosing this option to arrange premises with an average level of passability. Only in this case, the material for finishing will be able to serve for a very long time. Laminate service life 32 is slightly higher. When operating in a residential room, it may be over 15 years old, and in commercial - about 5 years. Please note that the material presented is perfectly suitable for living room, corridor, bedroom. Typically, the coating has an anti-slip coating, the upper layer is distinguished by relief, which ensures safety during operation.

Laminate life of 33 class

This is the best option for the deadlines. It is about 20 years in a residential type and approximately 12 in office buildings. It is 33 class that is considered ideal for finishing work in any room, regardless of its purpose. Please note that the cost of this option is very high, therefore for premises with a low period of passability (for example, bedroom) is a waste of money. 31 or 32 type of flooring is perfect.

How to increase finishing service

It is worth considering that the durability of the selected model depends on many factors that need to be taken into account during the installation of finishing and its operation. So, we advise you to consider such factors to create a durable surface:

Pay attention to the tips during the laying that manufacturers offer you;
Material for work must be in a dry room;
During cleaning, you should not use too wet cloth.

Popular entries

mFC04.U.

Weight bunch of laminate 33 class 8 mm

All the famous laminate invented in Sweden in the last century. Since then, the laminated coverage has gained popularity in the world, because it has a lot of advantages compared to other types. How to care for laminate 33 class, what is his technical characteristics and how to make the right choice, you will learn about this from this article.

Laminate under parquet 33 class

Laminate classes

What does 33 mean and what is this class? It is classified by strength, and the number 33 is a conditional designation. Classes 18 of various experiments are determined, in which the strength characteristics of bends, blows, effects of fire and moisture are measured.

So the following strength classes are distinguished.

Grade 21 - the use of low-class laminate is acceptable in rooms with small patency, such as a living room or bedroom.
22 - This class of laminate is used in rooms in which the permeability is not so big, but there are frequent mechanical impacts. For example, in playing rooms for children 22 laminate to the place.
23 - Corridor and Kitchen - Frequently used and spaced rooms in the apartment. For them, we need a durable and moisture-resistant material, because these premises are characterized by frequent exposure of moisture.
31 - Used floor coverings of this class more and more often. They are replaced by previous classes, due to the fact that the price is not big, and the strength is better. For example, such a laminate is used in rooms for which rare accumulations of people are characterized, for example, a conference room.
32 Strength class is used for office space, where a large leakage of people. Ladies on studs, which is typical for offices, represent the greatest danger of the surface of the coating.
33 put in sports halls and dance rooms or in other public places with a large flow of people, such as in stores.
34 is the most durable of all presented, manufactured for halls and premises with a great content of people.

As can be seen, varieties of laminated flooring a lot. According to the first digit of the conditional designation, the overall purpose of the coating is determined: 2 - for apartments, 3 - for public places.

Laminate structure 33 class

Any laminate is manufactured in a certain way depending on the technologies. The main feature becomes the basis of the design - DVP. It, first of all, is treated under certain thermal conditions with a press. The next stage of plate processing occurs with melamine. The melamine resin retains the stability of the floor covering from wear. The more his layer, the better. After that, paper is superimposed on the processed slab. Patterns and drawings are applied on top of paper, it is usually a texture imitation of a natural tree. Next is the laminating layer, which gives the panels of smoothness or relief, it all depends on the type of panels and stamping.

High technical specifications are obtained due to a special structure

Class 3 class: distinctive characteristics from 32

Sometimes some do not see the difference between 32 and 33 models and equate them as. This is explained by the fact that the technical characteristics do not differ, and the prices of them are different. And often because of this, questions arise: and not to overpay? It is worth soothe everyone and answer that the difference in technical indicators is. It is necessary to consider them deeper, and not dig on the surface.

The thickness of the durable panel 33 reaches 12 mm, and 32 class, in turn, does not represent the model thicker 10 mm. The thickness difference affects the maximum passing of panels, so, therefore, 33 it is higher. In 33, the lock system is enhanced and more reliable than 32, which has a simple collapsible castle. This is achieved using special impregnations that increase the moisture resistance of the material.

Confused them with each other due to the similar textures and their diversity. Those and others have not only imitation under the tree, but also under the stone, and the tile. A series of unique models - glossy material 33 class, having a unstained surface that you will not meet anymore.

Varieties of 3 class laminate

Each class of laminate has its subspecies. So and at 33 class has its own arsenal of panels with different thicknesses. The size of the thickness of the 3 grade laminate is occurring 8, 10 and 12 mm.

Laminate without chamfer

8 mm Class Coating 33

At least 33 for commercial purposes, but still 8 millimeter models are widely used for residential premises. Use a durable coating in the bedroom or in the children's no sense. For them and other residential premises, such as kitchens, living rooms, hallways, etc. Preferably 31 and 32 classes.

It is used mainly in places with an increased load: conference rooms, shops. But still, fat panels are suitable for premises with more passability, or 34th grade.

Laminate with a thickness of 8 mm has a number of the following advantages.

For household purposes, it is used without problems for 20-25 years. Some manufacturers guarantee lifelong use in the domestic purposes of their products.

White shade: 33 class can be used for home

Well tolerate moisture effect. Even models that do not have additional moisture-resistant layers, stealing water treatments.
Democratic prices. The view of the high cost of such models is wrong. How much does the pack of laminate weigh? The price is calculated from square meters, and not from the thickness of the model. And in one square meter you need to pay 1000-1500 rubles. Moreover, 33 laminate, Belgium and Germany - Countries Manufacturers, represents decorative panels in the same price category.
Design. A variety of decoration with a chamfer and without chamfer, both different wood structures and stone. Popular laminate wenge6, whitewash oak, etc.

Wenge 33 class

Easy installation. When laying you need to insert the boards one after another, collecting as a puzzle.
Care of 33 class laminate is unpretentious. The protective structure of the material does not delay dust and dirt on the surface. Easily cleaner wet rag.

Attention! The weight of the 33-mm thick laminate taching 33 mm is an average of 15 kg.

Laminated coatings have different thickness. The view is that the more thickness, the more stronger it is a delusion. Therefore, 8 mm laminate is called universal and optimal. High sound insulation, the quality of the lock mechanism and small prices - this is what attracts buyers. At the same time, the packaging of thick panels will cost 1.5-2 times more expensive.

COLUTION 33 Class 10 mm

A fat model seems to be a universal and practical option. It is characterized by 10 mm panel with a long service life and a reliable layer structure. Like 8 millimeter panels they have a lot of advantages:

Well tolerate high loads.
Racks to low temperatures.
Good noise insulation.
Not slippery coating allows you to use it in rooms with high humidity.
Easy care.
Waterproof laminate.

Waterproof laminate, gloss surface

Laminate in 10 mm from France, soaked with resins under greater pressure is popular. Their cost is more than 8 mm production models France, but remains acceptable.

In the market in recent years, 10 mm floor coatings from France and Belgium are popular. Using Laminate from Belgium 33 class will give the following advantages:

universal design;
easy and unpretentious installation. It is not even a non-specialist to cope with the installation;
simple care for moisture-resistant, non-polluting surfaces;
easy repair and maintenance;
safe and environmentally friendly material. Even the chamfer products are not affected by mold;

Panels without chamfer enjoy wide popularity. In particular, Germanic products are highlighted.

Cover 33 class 12 mm

For such thick panels there are plenty of advantages. So, according to many experts, 12 mm are acceptable in cases where the room has a large area. With 40 square meters and the laminate of 12 mm with the locking mechanism of the joints is set. The larger area, the more swinging arise. In such conditions, thin panels are more undergoing quality deterioration.

The thickness of the floor cover is important in cases where it is joined with other types of coating. For example, when weeping with tiles do not need to use the thresholds, if the thickness of the laminate and tile comes to one level.

The big thickness protects against unnecessary sounds. 12 mm castle mechanisms are more reliable than 8 mm.

It follows that thick floor coverings are used in rooms with high patency. Thin panels are designed for domestic use.

There are some shortcomings in the use of thick coatings. They are counted:

high prices;
laminate Class 33 and more than 10 mm thickness does not provide for the use of a "warm floor" system. The greater the thickness of the floor covering, the harder it is to break out the heat;
the dry microclimate of the room negatively affects the flooring of thick laminate. They are dried and the gaps between the panels are becoming more noticeable every year.

Based on the foregoing, it follows that the use of 33 class of laminate in residential premises is not so necessary, since this model for commercial use. For residential premises, 31 and 32 strength classes are more suitable. Their use is enough for any apartments.

For large characteristic large number of visitors, therefore, we need a durable laminate

For premises with a large number of people and undergoes, the material 33 of the class is not thinner than 10 mm. Large loads on the floor covering from thin panels are out of order, and thicker copies are able to withstand the 10 year load in its original form.

How to choose a laminate, what to be guided when choosing? Everyone will learn about it from the video

Average rating rating more than 0

Laminate Mass Thick 8 (mm)

home ⇒ Building ⇒ Finishing ⇒ Laminate

The most popular laminate board with a thickness of 8 (mm) 32 class of wear resistance having a width of 192 (mm) and a length of 1292 (mm), weighs 1.825 (kg).

Standard laminate parameters does not have, dimensions and weight depend on the manufacturer's structural solutions. The dimensions of the board are indicated in the format "Length / width / thickness".

Mass of the most popular samples:

Chalkboard 31 class, 1292x245x8 (mm) - 0.915 (kg), packaging weight of 8 pieces - 7.32 (kg).
Board 32 class, 1380x191x8 (mm) - 0.889 (kg), packaging weight of 8 pieces - 7.112 (kg).
Chalkboard 32 class, 1292x192x8 (mm) - 1.825 (kg), packaging weight of 8 pieces - 14.6 (kg).
Board 33 Class, 1286x282x8 (mm) - 2.5 (kg), packaging weight of 6 pieces - 15 (kg).

Important: Laminate 8 (mm) is intended for laying in residential premises and commercial premises of medium patency, while complying with the rules of use, its service life is up to 20 years.

Important: Formula for calculating weight: Length x Width x Thickness x Density.

Table of density of laminate on brands Brand Title Brand Density Plate Density in (kg / m3) Packaging Packing Mass, in brackets Number of panels (kg) Volume Panel volume in (m3)

Quick Step Classic.	979	12,5 (7)	0,001824
Magnat.	977	22,5 (8)	0,00256
Tarkett Lamiart.	923	14,8 (8)	0,002005184
Tarkett Vintage.	923	14,8 (8)	0,002005184
Floorwood Brilliance	918	16,44 (9)	0,00198912
Floorwood Prestige.	913	12,66 (8)	0,00173328
CLASSEN PROGRESSIVE	911	15 (10)	0,00164608
Kronostar Superior.	909	15,5 (8)	0,00213072
Egger Classic 32.	901	14,3 (8)	0,001984512
Egger Classic 33.	901	14,3 (8)	0,001984512
Floorwood City.	901	16 (9)	0,00197376
Floorwood Optimum	896	15,5 (9)	0,001921764
Floorwood Benelux	892	14,5 (12)	0,001353936
Laminels Kuban	892	15,2 (8)	0,00213072
Laminels Siberia	892	15,2 (8)	0,00213072
Floorwood Renaissance	889	17,5 (8)	0,002461472
Floorwood Profile	880	15 (8)	0,00213072
Kronostar Favorit.	880	15 (8)	0,00213072
Floorpan Black	854	14,56 (8)	0,00213072
Floorpan Red	854	14,56 (8)	0,00213072
Tarkett Cinema.	850	13,63 (8)	0,002005184
Tarkett Holiday	850	13,63 (8)	0,002005184
Kronospan Castello.	844	15 (9)	0,00197376
Kronospan QuickStyle	844	15 (9)	0,00197376

Weight and cost of laminate packaging: useful information and tips on laying, options like laying a laminate independently

Therefore, it is important to know from which such products consists. In addition, for more interest, you can view a video video to find out what manufacturers are guided by plants by setting the price of laminate.

One QUICK-STER laminate packaging, which refers to 32 class, weighs 12 kilograms.

A special wear-resistant layer of transparent color is applied on top to the laminated board. It is responsible for the abrasability of the surface of the panel and the classity of the goods. The coating is made of melamine resin. Corundum is added to the glossy version of acrylic, which gives a gentle acrylo of the necessary hardness. The stability of the coating depends on the thickness of the layer, but it does not affect the weight of the laminate packaging.
The layer decorative is performed from paper, which according to the RAL table can have any color and drawing, depending on the manufacturer's imagination. But in most cases, produces produced laminate with a pattern imitating natural materials, including wood, stone, granite, marble, sand, etc. Such characteristics of the material practically do not affect its price.
Under the decorative layer is placed in the moisture-proof film, which is designed to protect the lowest HDF slab. Such waterproofing plays an important role in the panels. The film reliably protects the material from moisture, even randomly spilled water will not affect the structure of the laminated floor within three days. Such strong protection is not on all variants of the laminate, although many manufacturers improve their products. Find out, there is a defense material, you can learn from the instructions attached to the package.
Four figures in the figure marked the stabilizing part of the panel, which is made of high-strength board DVP. It is important to know that the HDF marking is a label of the European Producer Association. It affects the dimensions, the weight of the packaging of laminate and each panel separately. It depends on the thickness of the same panel, its strength and quality of the castle embedded around the perimeter, its triggering.
The panel is located on the panel, which, in turn, is intended to protect the stabilizing layer from the raw floor, which laminated laminated panels. This layer typically contains full information about the laminate, its parameters, characteristics, classity and other parts are indicated. Some manufacturers equip their products with an additional layer, that is, a substrate that slightly affects the weight of the floor covering.

Different types of laminated panels may have dimensions that differ significantly from each other. For example, take the table in which the panels are located, depending on its size.

It is important to know that the weight of 1 square meter of laminate does not affect their area, which cannot be said about the thickness. From the amount of consumable material on the manufacture of one panel, not only its weight, but also the weight of the entire packaging is depeted.

Wearness-resistance classes.

For this, the weight of the packaging is enough to divide the number of panels in it. Usually one packaging weighs at least 12 kg. And no more than 17 kg.

Helpful information! You can try to calculate the weight of the 33 class laminate, which has the following parameters: 1280 * 240 * 12 mm and a lot of packing of 17.4 kg, packaging 8 pieces. Knowing such parameters, calculated the weight of the panel is very simple - 17.4 / 8 \u003d 2,175 kg. Such calculations can be carried out with any packaging of laminate, regardless of its size and brand.

Conclusion.

From the width of the lock depends high-quality and its correct operation when installing the floor covering. The advantage of such panels is that when docking, they practically do not form gaps.

But if they are all, it is possible to close them with the help of an ordinary hammer, and it is very easy and simple.

www.laminatguru.com.

How many laminate packaging weighs - inkmilk.ru

Performing repairs, it is very important to choose high-quality and reliable materials for finishing. In addition, you need to know exactly how much material is required to carry out work. After all, the materials are not suiced and buy them with a big margin unprofitable. If the laminate is selected, then you need to know not only the size of the lamellae, but also their weight. We will figure it out how much the laminate packaging weighs and what parameters affect the weight of the material.

One of the most popular floors for the floor is laminate. It looks like a covering attractive, it is easy to lay it on my own. But first you need to choose the appropriate material.

One of the important characteristics of the laminate is its weight. Weigh the material in the construction store will not become, so when choosing will have to focus on the weight of the pack. Let's figure out how much the packaging of high-quality laminate should weigh.

The appearance of the coating determines the polymer film that covers the laminate from above, but the weight of the material will depend on its base. We'll see what the structure of the laminate board is. This material is a multilayer design, its composition includes the following layers:

Substrate. This is the lowest layer, the paper covered with synthetic resins is applied to its manufacture. Functions of the substrate - the protection of the core from the negative impact of moisture.
The foundation. The middle layer determines the properties of the laminate as rigidity and strength. The basis of the chipboard of various thicknesses is manufactured. It is from what the base has a thickness, such and will have a tutu weight of laminate.

Tip! The thickness of the main layer also affects the strength of the castle compound. The optimal thickness for the laminate is considered to be 8-12 mm.

Decorative. This layer determines the appearance of the material, is made of furniture foil or paper.

Tip! The most popular version of the decorative design of the surface of the board is a drawing that simulates the surface of different wood species. But you can find other colors, for example, imitating the surface of the decorative stone.

Protective. This is an acrylic or melamine resin coating, it has a thickness of 0.3-0.6 mm. The functions of the layer are obvious - it protects the surface from mechanical damage and moisture.

Classity

The combination of various parameters (the thickness of the main and protective layers, strength, etc.) determines the classification of the laminate. Domestic laminate does not differ in great resistance to abrasion and durability.

This group includes material 21, 22 and 23, having a thickness, respectively, 6, 7 and 8 mm. This type of flooring is currently being used extremely rarely, since the service life is insignificant (2-6 years).

Much more often consumers choose production material - 31, 32 and 33 class. Moreover, the laminate of 32 class is the most popular option, since this material is characterized by the optimal value ratio and quality. Its thickness is 8-10 mm, and the service life is 15-20 years.

Most manufacturers pack material into a polyethylene film having heat shrink properties. Packed in the film The material is stacked in cardboard boxes.

Film packaging is good because it reliably protects the laminate from the effects of dampness and pollution, but it does not prevent the buyer to consider the appearance of the coating. Each pack must necessarily be a marking, which contains information about the properties of the product. The marking should indicate:

name of the company's company;
wear resistance;
weight of packing;
the number of elements in the package;
area of \u200b\u200bone element;
code and consumer name of decorative design of material ("beech", "Cherry", etc.).

How many boards in a pack?

Laminate is for sale not with separate lamellas, but by packages. Therefore, it is necessary to know how many elements in one pack and what is its weight. It will depend on the thickness of the material, as well as from the overall size of the lamellae. Material parameters:

thickness of laminate laminate 32 grade 8-10 mm;
the length is 1220-1380 mm, but some manufacturers produce lamellas and more significant lengths;
the width depends on the type of material, it can be single or two-way, so the width varies within 90 to 330 mm. However, 185 mm is considered the most popular width option.

Since the parameters of the lamellas are different, the number of pieces in the pack will differ in the pack. If we are talking about class 32 laminate, then the number of lamellae in a pack is 8-9 pieces. The number of elements of the laminate of other species can vary from 6 to 12 pieces in one pack.

Thus, the weight of the packs are influenced by such parameters as:

dimensions;
thickness;
the number of elements in the package.

The weight of the pack, as a rule, is indicated by the manufacturer in marking. There you can also find information about the number of elements in the package. Knowing these values, it is easy to calculate how much one element weighs. For example, if the tutu weight is 16.8 kilograms and 8 lamellas are in it, then the mass of one element will be 16.8. 8 \u003d 2.1 kilograms.

Tip! The weight of one laminate packaging, as a rule, is within 12-17 kilograms.

Why do you need to know the weight?

Not all consumers understand why it is necessary to know the weight of the laminate. What can affect this parameter, except for loading and unloading work? It turns out that the weight of the coating can affect the strength of the main designs of the house. It is very important to take into account the actual loads rendered on the supporting structures of the house, so the weight of the coating you need to know.

In addition, heavier, which means, thicker panels are characterized by greater strength and greater reliability of the castle compound. The wider castle, the easier it will be a coating that will look outside as a solid surface without visible joints.

So, when buying a laminate, it is necessary to pay attention not only to the appearance of the laminate, but also on the properties of this material, including by weight. Judging by the weight of the package of the material, it will be possible to conclude about the thickness, and therefore the strength of the selected material.

You must log in. To leave feedback.

Home / Preparation / How many laminate in a pack? The size and weight of the pack of laminate.

How many laminate in a pack? The size and weight of the pack of laminate.

Why is it important to know how many square meters of laminate in a pack? During the repair work, the final load always turns out to be on the floor. To extend the life of its service, under the laminated panels steering the substrate. And also resort to the use of self-leveling mixtures capable of leveling any irregularities. Before buying a lamella, you must calculate the amount of the required material. Knowing the total figure in m. As well as the volume of packaging, you can count the number of packages.

Just in case, stocking of additional packing boards, because no one is insured against wear, breakdowns and other damage to panels that are easy to eliminate.

Weight bunch of laminate

The size of the pack of laminate is determined by the size of the boards. These objects of rectangular shape, like any other geometric bodies, have their height, length and width. In the process of acquiring this is precisely the indicators that you need to pay special attention.

It is also an indicator of the thickness of the boards. The thinnest options are 6 mm, the worst - 12 mm. According to experts, the optimal option is 8 mm. Today, such strips are produced by all manufacturers of laminated coatings. These thick boards have much better characteristics, including:

They are characterized by smaller deviations in size;
the floor mounting process is simpler;
they are worse conducting heat, and therefore the reason is warmer;
they do not have traces from furniture.

As a rule, the length varies from 126 to 138 cm. This is standard dimensions. Of course, there are special exceptions, but they are rare enough. Sometimes you can meet boards with a length of up to 185 cm. Yes, it is very difficult to work with such panels, because the installation process can be trusted only to those skilled in the art. In addition, to align under them the reason is hard enough.

Before making the final choice, explore the room. If it is spacious enough, take the material is authentic. In the case when it is small, do not use overall lamellas.

Narrow strips mimic a real parquet board. Their width is usually 9 cm. There is also an excellent imitation of ceramic tiles with a width of 33 cm. But, the most popular option is still the width of 18.5-19.5 cm. Such size makes the floor more natural.

How much does the pack of laminate weigh? It all depends on the manufacturer. On average, from 15 to 17 kg - the weight of the packaging of 2-2.5 m in size? Or, in other words, 8 pieces in the package. The length of one board from 110 cm to 120 cm, width - 15 cm to 20 cm.

Consider the exact weight to say hard, because it all depends on the manufacturer. There are separate varieties of lamellae, which are distinguished by almost identical width parameters and lengths, like Quick-Steparte (624 mm x 624 mm) or Quick-Stepquadra (394 mm x 394 mm). But, there are also species with completely different parameters. Take the same brand - Quick-Step Majestic Pro or Quick-Step Largo. The most accurate weight is always indicated on the end of packaging with lamellas.

You can make preliminary calculations at home, but in essence it can do for you in a specialized store. The main parameter to provide you - the area of \u200b\u200bthe room. The main parameters that will take into account the sellers - weight, the number of pieces, the height values, length and widths.

How many laminate in one pack?

Laminate pack area from 1.85 m? up to 2.05 m? (8-10 boards). So for laying indoors with an area of \u200b\u200b12 m? 6-7 packs needed. Remember that the material must be taken with a small margin to save several boards for the future, because during the installation process even an experienced master can damage 1-2 boards.

It would be completely wrong to assert that in any package 8 bands. How many laminate pieces in a pack? It all depends on the manufacturer. Note that there are a lot of different variations. Let's look at what kind of laminate size from different manufacturers.

First, we estimate the offers of manufacturers whose packaging size depend on the collection.

Superior - 1380 x 193 mm (count - 8);
Grunhoff - 1380 x 193 mm (count. - 8);
PREMIER - 1380 x 193 mm (count - 8);
HOME - 1380 x 193 mm (count - 8);
SALZBURG - 1380 x 193 mm (count - 7);
Prime Line - 1380 x 193 mm (count. - 9).

Castello - 1285 x 192 mm (count. - &);
KRONOFIX - 1285 x 192 mm (count. - &);
Quick Style - 1285 x 192 mm (count - 7);
Comfort - 1285 x 192 mm (count - 10).

Super Natural Classic - 1285 x 192 mm (count. - &);
VarioStep Classic - 1285 x 192 mm (count. - &);
Vintage Classic - 1285 x 192 mm (count. - 7);
Floordreams Classic - 1285 x 192 mm (count - 6);
KRONOFIX COTTAGE - 1285 x 192 mm (count - 10);
KRONOFIX CLASSIC - 1285 x 192 mm (count. - 10);
VINTAGE NARROW - 1285 x 123 mm (count. - &);
VarioStep Narrow - 1285 x 123 mm (count - 12);
Super Natural Narrow - 1285 x 123 mm (count - 12);
Castello XL Stoneline - 1276 x 327 mm (count - 6);
STONE IMPRESSION CLASSIC - 1285 x 327 mm (count - 6);
VarioStep Long: - 2000 x 192 mm (count - 6);
Castello Wide Body - 1285 x 242 mm (count - 8);
VarioStep Wide Body - 1285 x 242 mm (count - 8);
SUPER NATURAL WIDE BODY - 1285 x 242 mm (count. - 8).

Quadra - 394 x 394 mm (count - 10);
ARTE - 624 x 624 mm (count - 4);
CREO / GO - 1200 x 190 mm (count. - 8);
Classic - 1200 x 190 mm (count. - 8);
Clix Floor - 1200 x 190 mm (count. - 8);
Rustic - 1200 x 1234 mm (count - 12);
Exquisa - 1224 x 408 mm (count. - 2);
LAGNE - 1380 x 998 mm (count. - 12);
ELIGNA - 1380 x 156 mm (count. - 8);
ELITE - 1380 x 156 mm (count. - 8);
Perspective - 1380 x 156 mm (count - 7);
COUNTRY - 1380 x 156 mm (count. - 7);
Vogue - 1380 x 156 mm (count. - 7);
ELIGNA WIDE - 1380 x 190 mm (count. - 8);
Perspective WIDE - 1380 x 190 mm (count. - 6);
Colonial - 2050 x 156 mm (count - 6);
Largo- 2050 x 205 mm (count. - 6);
Majestic Pro - 2050 x 205 mm (count - 6).

Vintage - 1292x 194 mm (count. - 8);
Legacy - 1292x 194 mm (count - 8);
Woodstock Premium - 1292 x 194 mm (count - 8);
Woodstock - 1292x 194 mm (count. - 8);
Robinson Premium - 1292 x 194 mm (count. - 8);
Revelation - 1292x 194 mm (count. - 8);
Holiday - 1292x 194 mm (count - 8);
Fiesta Cool - 1292 x 194 mm (count. - 8);
PLAYSTYLE 832 - 1292X 194 mm (count. - 8);
Jungle 832 - 1292x 194 mm (count. - 8);
SELECT - 1292X 194 mm (count. - 8);
Lamin'art 832 - 1292x 194 mm (count. - 8);
POLARIS STYLE - 1292 x 194 mm (count. - 8);
Oak Art - 1292 x 194 mm (count. - 8);
Intermezzo - 1292x 194 mm (count. - 8);
COSY - 1292X 194 mm (count - 8);
ARTIISAN - 1292X 194 mm (count. - 7);
Infinite - 1292x 331 mm (count. - 6);
Lamin'Art- 832 - 1292 x 331 mm (count - 6);
Eden- 1292 x 192 mm (count. - &);
Sublime style - 1292 x 136 mm (count. - &);
Liberty - 1292x 159 mm (count. - 7).

Country- 1215 x 143 mm (count. - 8);
Villa - 1212 x 142 mm (count. - 8);
EPI - 1290 x 192 mm (count. - &);
HDM - 1294 x 185 mm (count. - 8).

MegaFloor M1 - 1292 x 193 mm (count - 10);
Spirit- 1292 x 193 mm (count - 10);
Floorline Classic Solution - 1292 x 193 mm (count - 10);
MegaFloor M2 - 1292 x 193 mm (count. - 8);
Floorline- 1292 x 193 mm (count. - 8);
Floorline Classic Country - 1292 x 193 mm (count - 8);
Floorline Classic Universal - 1292 x 193 mm (count - 8);
MegaFloor M2 Block - 637 x 330 mm (count - 8);
Floorline Block Modern - 637x 330 mm (count - 8);
Laneo - 1292 x 193 mm (count - 7);
Floorline Kingsize - 1292 x 326 mm (count - 6);
Floorline Classic - 1292 x 193 mm (count - 6);
Floorline Classic Business - 1292 x 193 mm (count - 6);
Floorline Medium Compact - 1292 x 134 mm (count - 6);
CLASSEN - 1290 x 194 mm (count. - 9).

There are manufacturers, all the lamellas (regardless of the collection) of the same sizes. These include:

Alloc - 1207 x 193 mm (count. - 8);
Balterio - 1261 x 189 mm (count - 8);
Berryalloc - 1285 x 186 mm (count. - 8);
Bode - 1210 x 165 mm (count. - 10);
Parador -1285 x 400 mm (count - 5);
Pergo - 1132 x 283 mm (count. - 6);
Premium - 1212 x 193 mm (count. - 8);
Proteco -1210 x 193 mm (count - 8).

Family - 1285 x 192 mm (count. - &);
Classic - 1285 x 192 mm (count. - &);
Rustico - 1285 x 192 mm (count. - &);
Fashion - 1285 x 192 mm (count. - &);
Valentino - 1285 x 192 mm (count. - &);
Castello Classic - 1285 x 192 mm (count. - &);
Bellissimo - 1285 x 192 mm (count. - &);
Sublime - 1285 x 192 mm (count. - 7).

Each manufacturer adds instructions to package with similar characteristics. Also there is a special liner, exactly how to mount the boards. Knowing how much laminate in a pack, in a brand, you still can calculate the required amount of material for the room.

Video - master class on laying laminate.

How many pieces in a pack of laminate

The question of how many square meters in a pack of laminate can be called one of the most important among those that arise from housing owners during the procurement of materials intended for carrying out repair work.

Calculation of the material necessary for laying a new floor

By purchasing any materials for repair or construction, it should not be treated thoughtlessly. Knowing that the greatest popularity of consumers uses a laminated board with a thickness of 8 mm, it is necessary to know what its weight depends on and what is the number of components in one pack.

Typically, each pack contains 8 components with laminated coating. The mass of such packaging depends on many parameters.

The most popular laminate - 32 class

The most popular and in demand can be called laminated material 32 class, which is widely used to create a finishing floor covering and in residential, and in office space.

Its length reaches 180 cm, the width is 20 cm, and the thickness is 8 mm. However, there are also such elements that are created for use in rooms with increased patency and in order to withstand pretty high loads, they have an additional protective layer. Accordingly, the thickness of such lamellas increases, which means that each product becomes a little harder. The weight of the laminate packaging is also increasing, characterized by increased resistance to abrasion.

Another important factor is the size of the board. There are products created in order to imitate parquet. Their width is at least 30 cm, even with a thickness of 8 mm and the number of boards in one package of 8 pieces, the weight of the laminate bundle increases significantly. This also applies to products from the board 33 and 32 class.

Laminate 33 type 3 and laminated type 32 panel differ in weight, and if each of the lamellae has a width of 40 cm, the thickness is 8 mm and is designed to mimic the floor covering from the tile.

What does the weight of the laminate depend on? First of all, it should be said about the value of the number of structural elements in the laminate packaging. 8 pieces is a standard number, but because of the nuances listed above and the differences that exist between the types of laminated board 32 and 33, the weight of the laminate in each package is noticeably different.

Extra components either can not always come in handy, but still it is better to have several elements in the case of damage during installation.

Why the weight is so important

The weight of the laminate has a value when calculating the load on the base of the floor

Before starting laying a new flooring, it is necessary to accurately calculate not only the exact number of components required to perform work, but also the upcoming load, which will be rendered on the base of the floor with elements of species 32 or 33.

You can get the most complete information about such a load, knowing how much packages will need and how much the packachting of the laminate of each type weighs.

It will be necessary to get information about:

how many laminate in pack;
what class (32 or 33) lamellas are in the package;
what are the parameters (length, width, thickness).

The number of sheets of laminate on the room can be calculated by the width of the lamellae

This is the most important information that allows you to understand not only the weight of the laminate, but also what area can be set by this amount of acquired material.

If in each pack 8 pieces of lamellae, then determine the area on which you can create a new floor covering, really, calculate the number of square meters depending on the width and length of each of the lamellae in one package.

32 and 33 types of laminated products differ significantly in their parameters and mass.

Some very well-known manufacturers are laid in the box not 8, and 10 or even 12 lamellas. From how much laminate in one package depends a significant and noticeable change in weight.

The laminated floor, which was allowed using 33 class products, is highly resistant to different kinds of damage, and a certain number of lamellae in a package with type 33 products will be weighing more than the amount of type 32 laminate.

This is due to the application of an additional protective layer, a change in thickness.

Calculation of the required number of lamellae

To correctly calculate the consumption of products for the arrangement of a certain room, you must pay attention to the marking. Each box contains detailed information on what exactly the board is placed in it, what volume can be encouraged if the use of separate parts of the design contained in it, what will be the load on one square meter. For more information on calculations, see this video:

Speaking about the load, it is worth paying attention to the fact that the exact mass of each of the pieces and the whole box as a whole cannot be determined independently. It is better to trust the manufacturer and get the necessary information, looking at the end of the box in which the selected product is located.

How to start putting laminate

Laying of laminate on penplex

Laminate door sheathing

Calculation of the required amount of material and how to find out how much laminate packaging weighs

The choice of finishing material is not a simple process, it is necessary to spend a huge amount of time not only to evaluate its technical abilities, but also on the calculation of the required volume of building materials for work. Also, an important point is considered to calculate how much the laminate packaging weighs, it affects the delivery of the product and on the construction of the house as a whole.

Length, width and thickness - not only enough weight

We study the weight of the panels

The main share of the laminate depends on which the laminated panel is made, not the upper protective layer in a combination with the rear film, namely the "core". In most cases, for premises with medium and elevated crossings, a fiber frameter uses, in rare cases, MDF is used.

Of course, you should not forget that the thickness of the material is not the last indicator.

For example, if we consider the laminate, the length of which is 128 cm, width 21 cm, thickness is 12 mm, and in the package of such panels only 6, then from the total weight of the product, it is possible to calculate the weight of each panel separately:

The total weight of the laminate packing of moisture-resistant 17.4 kg is - that is, dividing this number to 6 (the number of pieces in a pack), we obtain the number 2.9 - which is the weight of each product.
From the resulting amount, we subtract more several dozen grams to the packaging material - here, in fact, all the arithmetic, the weight of laminate is 12 mm equals 2.85 kilograms.

The same approximate weight of packaging (17 kg) can be applied not only for moisture-resistant products, 8 mm laminate is sold in the same weight volume, only the number of panels increases.

For your information! There are packs with the number of products more than 20 pieces.

As for the calculation of weight 1 square meter of flooring, then in the case of 12 mm laminate (from the above example) it turns out:

With a length of 128 cm and a width of 21 cm, 4 panels will be spent on 1 square meter (translate centimeters into square meters): 0.2 multiply by 1.28 and get 0.24 m2.
Now the result obtained is multiplied by 4 and get 0.96 m2 (as close as possible to an integer square meter). From here we conclude: in 1 m2 - 4 laminated panels, where the weight of each 2.85.
Next action: multiply 4 by 2.85 and we obtain the weight of 1 m2 of laminate approximately 11 kilograms.

Laminate weight 12 mm - on some packages, everything is already in detail

In fact, the weight of the laminate also affects the class of the product, that is, to calculate the maximum load on the floor, which will arise after laying the finishing material, all parameters should be taken into account: thickness, class and dimensions.

Note! The weight of the laminate pack is usually indicated on a brochure embedded in the package, so it is enough to know the number of panels for the work of the required calculations and divided into total weight.

Why is it so important to know the weight of the finishing material

During the construction of the house, especially at the stage of the construction of the foundation and the construction of the floor, the question often arises - what load will be in the final result? And since the floor covering will be laid out of the laminated panels, it would be right to find out how much laminate weighs and the substrate for it.

Tip! Even if you laid the base of the house with a margin of actual loads, that is, you calculate the weight from the maximum permissible norm (although it is expensive by materials), the probability of an unexpected shrinkage of a separate part of the house is high. After all, it is necessary to take into account such criteria as: precipitation, furniture, number of people, material wear, soil density - if you do to the tolerance, the foundation will cost "a penny".

How to calculate the required amount of laminate on the floor

For one of the questions, we have already answered, now you know how to calculate the weight of laminate 1 m2 in a residential room. You should proceed to the next problem - how much will the floor covering need?

The most important indicator is the method of laying, as there are several of them, we will consider the most popular:

Lady laminate laying

Important! No matter how much laminate bundle weighs and how many panels in it are, first of all, it is worth remembering that 5-10% of marriage is added to the overall working area.

For example, residential premises 20 m2 It is necessary to reflect and sit on the floor of the laminate. Before the calculations begin to add to this number 5% (if you are confident in your forces) of marriage, that is, it turns out that in fact you will need to purchase material at 21 m2.
We look at the dimensions of the panels and the amount of them in the package (we use an example with 12 mm laminate from the first example), we obtain: in one pack of 6 products with dimensions in 128x21 cm.
As we remember, one panel - 0.24 m2. Now we use the "power" of multiplication by 21 m2 and in the end we have 87.5 (the number of approximate) pieces. This is the total number of panels required for laying outdoor coating.
Last barcode: divide 87.5 to 6 (pieces in one pack) and get the number 14.58 (in fact 15) - this is the necessary number of packages for the extracted 20 m2 housing.

Note! Knowing the weight of one laminate packaging - 17 kilograms. You can calculate the total weight, we multiply this number for 15 and get 255 kilograms. You will need a cargo machine to deliver laminate.

Diagonal laying

The calculation is carried out by the same scheme as in the longitudinal laying, not only 5 is added to the marriage, and at least 10%, at the best case, if you have never come across finishing works, add 15%.

Interesting solution - Laying of laminate diagonally

Surface preparation

It should be remembered that the most important when laying laminated panels on the floor is its smooth surface that will avoid any nuances in the future.

For this, the cement-sand screed on the concrete floor is poured. Features several:

The room is divided into 3-4 parts. To make it easier to mount the screed.
To excerpt the horizontal level, pre-mounted beacons are used. The photo shows an example as they can be installed.

Metal profile is fixed by cement according to the specified height

The most important tool in the cement screed is a rule, therefore, which is better and even more efficient, the more effective will be the result.

Stalim Laminate.

Work begin with the angle of the room.

Stelite in the direction of sunlight - the ends of the laminate will not be so rushed into the eyes

Panels are mounted in three ways: click and lock lock systems (the instruction of the technology is embedded in the packaging with laminate) and with a special glue.
For more smooth pumping of the laminate, use the electrolovka if it is not available, take it in the construction store. The price of such a "bonus" is not high, but the speed of work is doubled.

This is what ultimately you should get

Problems with laying finishing material should not arise, but if, someone is interesting or something incomprehensible, you can watch the video: Mounting laminated panels on the floor. We hope that the article was useful for you.

How many tutu laminate 32 class 8 mm

Buying laminate as an outdoor coating, the owner of the housing stops its choice on modern material that meets the requirements of safety and endurance to such factors as: light, moisture, temperature increase, mechanical damage. Deciding with a concrete brand and the colorlike and texture, it is equally important to know how much laminate packaging weighs.

For what you need to know the weight of the packaging of laminate

For the packaging of the laminate, a special heat shrink film with a thickness of 80 microns is used. It allows you to consider the drawing and the color of the purchased goods, and also protects the panels from dust and moisture. Under the film there are sheets with a description where the manufacturer, the wear resistance class and various pictograms telling about the properties of this coverage are indicated. It is noted here and how much the package of laminate is weighted, for example, the most popular 32 class with a thickness of 8 mm.

First, the type of transportation of material from the store to the house depends on the total weight of the acquired laminate. For multiple packages, a light machine is suitable. For a large amount, you will have to take advantage of a special car for freight having a tent roof, because even hermetic packs of laminate should not be transported in the rain.

Secondly, the total weight of the floor material is important during the construction of the house when the foundation is erected and concrete floors for the floor are being built. Here the question arises about the load on the base of the building, in which it is required to take into account many factors, including the weight of the floor material. If a laminate is selected, for example, 32 grade with a panel thickness of 8 mm, then you need to know how much one such packaging weighs. By multiplying this number on the number of packs, we get the overall weight of the coating.

By changing the floor cladding in old wooden houses, the calculation of the total weight of the laminate is directly related to whether the existing overlaps will be able to end the extra load. Consultation of a specialist is necessary here.

Laminate Board Structure

How much will weigh the floor covering, depends on its structure, and specifically, from the "core", the composition of the bearing layer. Laminate is a modern material that is facing floors with remarkable characteristics: hardness, wear resistance, impact resistance, thermal stability and others.

It consists of 4 main layers, although some manufacturers can add and additional, the fifth level:

The upper layer protects the entire design from mechanical shocks and damage, gives the material thermal resistance and light resistance. It is made from melamine resin. The coating strength is directly related to the layer thickness, but it does not affect the weight of the laminate packaging.
The next layer gives the appearance, carries the figure of the floor covering, it can imitate natural materials: wood, granite, stone, sand, marble and even skin of exotic animals.

The medium or carrier layer is the basis of the panel, on which thermal insulation depends, the stability of the laminate to moisture and the other. Make this part of the board from the fiberboard. Here are castle mechanisms, their strength is due to the thickness of the panel.
Stabilizing, the lower layer creates the rigidity of the board, protects against deformation. At this level, all information on the coverage, its parameters, class, characteristics and other parts are located.

Some manufacturers create additional levels. For example, under the top layer, a layer of aluminum or corundum dioxide microparticles can be added to increase the strength of the coating, and another part is applied to the bottom to enhance noise insulation.

The main weight of the laminate board falls on the carrier layer, the harder, the sweaty will be lamella. It is produced from wood dust, which is impregnated with resins under high pressure and, frozen, becomes extremely solid and rigid. HDF is a stove having a high density value, MDF - average. But this characteristic as the density may be indicated on the package. Instead of it in the certificate there are the thickness of the laminate panel, the weight of the pack and the area of \u200b\u200bthe coating.

The laminate layers are firmly bonded with each other, and it is performed on one of two technologies: HDL produces high pressure and DLP low or direct pressure. Such outdoor material will be durable and will serve not one year, even subject to large loads, as the laminate of the most famous 32 class.

Dimensions of the laminate board

Different producers of floor coverings produce boards of different sizes, which determines the dimensions of the packaging and its weight. By purchasing laminate, you need to take into account these indicators.

The thickness of the panel can vary in the range from 6 to 12 mm. Professionals usually prefer the size of 8 mm and 32 class. It is believed that such boards have the most convenient characteristics. They are easier in installation and warmer in operation, since they have low thermal conductivity.

The length of the usual panels ranges from 126 to 138 cm. But there are exceptions, the installation of non-standard boards up to two meters can produce only professional stackers. The selection of the length of the laminate panel depends on the room. For a spacious room, long boards are suitable, and shortly choose for small area.

The width of the laminate board also fluctuates in large limits. The nineisantimeter panels can imitate parquet, and having a width of 33 cm create a floor similar to the coating with ceramic tiles. The most popular types of laminate boards have a width of 20 cm. It is the material 32 class with a thickness of the 8 mm panel.

The last indicator of the laminate packaging size is the weight that can also fluctuate depending on the manufacturer, the number of boards, the class of wear resistance and other coating parameters.

Therefore, when buying a laminate, it is worth choosing a single brand product, because the panels of even one class and similar dimensions in different manufacturers may not coincide with the parameters of the locking mechanisms, colors and quality.

Weight of individual panels and laminate packaging

Different types and classes of panels have dimensions that differ significantly from each other. One package with such material can weigh about 15-17 kg. The most famous and common type of laminate has packs of 16 kg. The data is printed on the end side, there the manufacturer indicates how many weighs 1 m² of laminate in the package. So you can calculate the overall gravity of the floor cladding, which comes to the area of \u200b\u200ba particular room. It is necessary to know for old houses with worn outlabs.

How much weighs the pack of laminate, depends on the number of panels and from square meters marked on the end side of the box. For many brands it is from 7 to 10 stripes and from 1.5 to 2.5 m². Some famous manufacturers pack high quality material for two boards.

As already mentioned, the weight of the laminate panel directly depends on what its "core" is made, the main carrier layer. In low-cost varieties of flooring, a wood-fiber plate is usually used. For example, the weight of one lamella, having a length of 130 mm, a width of 21 mm, and a thickness of 12 mm, equals approximately 3 kg. Packaging consists of 6-10 boards. Accordingly, the total weight will be from 16 to 32 kg. Sold and "wholesale" packs, which consist of 20 panels. Such a product is usually transported by special loaders.

But the thickness of the panel also plays a latter role. Since the laminate with a greater height of the board refers to 32, 33 and 34 classes, then the weight of such a coating increases, and its quality characteristics. But the installation is substantially simplified.

Affects the weight of the laminate panel and the class of wear resistance. According to it, the thickness of the board can be from 8 to 12 mm. Of course, the weight of the packaging of the most common laminate 32 grade laminate with a thickness of 8 mm will be less than the coating of a similar level, but a thickness of 12 mm. On average, it ranges from 12 to 17 kg, depending on the number of panels in a pack.

How many laminate need to buy

Holding how many laminate packs need to be purchased for laying gender, they proceed from the total area of \u200b\u200bthe surface being repaired. To do this, recognize the parameters of all rooms in the apartment and fold the obtained values. In the usual pack of floor covering, an average of 8-10 boards, which will be enough for cladding 2 square meters. For example, we have a room with an area of \u200b\u200b32 m², we divide this number 2 and we get 16 or the desired number of laminate packages that you need to buy. Showing an approximate count. Much more precisely, it will make employees of that building materials store, which will be purchased. They will clarify how much laminate box weighs and the entire purchased product.

You should not forget that a little reserve should be added to the resulting result in case of damage to individual boards when installing or unforeseen replacement during operation. It may happen that such a laminate will disappear from the sale or similar product of the same brand will be slightly different from the one that was laid in a particular room. As they say, the reserve of the pocket does not pull. "

Why is it important to know how many square meters of laminate in a pack? During the repair work, the final load always turns out to be on the floor. To prolong its service life, under laminated panels, and also resort to the use of self-leveling mixtures that can level any irregularities. Before buying a lamella, you must calculate the amount of the required material. Knowing the total number in m?, As well as the volume of packaging, you can calculate the number of packages.

! Just in case, stocking of additional packing boards, because no one is insured against wear, breakdowns and other damage to panels that are easy to eliminate.

Weight bunch of laminate

Height

They are characterized by smaller deviations in size;
the floor mounting process is simpler;
they are worse conducting heat, and therefore the reason is warmer;
they do not have traces from furniture.

Length

Before making the final choice, explore the room. If it is spacious enough, take the material is authentic. In the case when it is small, do not use overall lamellas.

Width

Consider the exact weight to say hard, because it all depends on the manufacturer. There are separate varieties of lamellae, which are distinguished by almost identical width parameters and lengths, like Quick-Steparte (624 mm x 624 mm) or Quick-Stepquadra (394 mm x 394 mm). But, there are also species with completely different parameters. Take the same brand - or Quick-Step Largo. The most accurate weight is always indicated on the end of packaging with lamellas.

First, we estimate the offers of manufacturers whose packaging size depend on the collection.

Kronostar

Superior - 1380 x 193 mm (count - 8);
Grunhoff - 1380 x 193 mm (count. - 8);
PREMIER - 1380 x 193 mm (count - 8);
HOME - 1380 x 193 mm (count - 8);
SALZBURG - 1380 x 193 mm (count - 7);
Prime Line - 1380 x 193 mm (count. - 9).

Kronospan.

Castello - 1285 x 192 mm (count. - 9);
KRONOFIX - 1285 x 192 mm (count. - 9);
Quick Style - 1285 x 192 mm (count - 7);
Comfort - 1285 x 192 mm (count - 10).

Kronoflooring

Super Natural Classic - 1285 x 192 mm (count - 9);
Castello Classic - 1285 x 192 mm (count. - 9);
VarioStep Classic - 1285 x 192 mm (count - 9);
Vintage Classic - 1285 x 192 mm (count. - 7);
Floordreams Classic - 1285 x 192 mm (count - 6);
KRONOFIX COTTAGE - 1285 x 192 mm (count - 10);
KRONOFIX CLASSIC - 1285 x 192 mm (count. - 10);
Vintage Narrow - 1285 x 123 mm (count - 9);
VarioStep Narrow - 1285 x 123 mm (count - 12);
Super Natural Narrow - 1285 x 123 mm (count - 12);
Castello XL Stoneline - 1276 x 327 mm (count - 6);
STONE IMPRESSION CLASSIC - 1285 x 327 mm (count - 6);
VarioStep Long: - 2000 x 192 mm (count - 6);
Castello Wide Body - 1285 x 242 mm (count - 8);
VarioStep Wide Body - 1285 x 242 mm (count - 8);
SUPER NATURAL WIDE BODY - 1285 x 242 mm (count. - 8).

Quick-Step.

Quadra - 394 x 394 mm (count - 10);
ARTE - 624 x 624 mm (count - 4);
CREO / GO - 1200 x 190 mm (count. - 8);
Classic - 1200 x 190 mm (count. - 8);
Clix Floor - 1200 x 190 mm (count. - 8);
Rustic - 1200 x 1234 mm (count - 12);
Exquisa - 1224 x 408 mm (count. - 2);
LAGNE - 1380 x 998 mm (count. - 12);
ELIGNA - 1380 x 156 mm (count. - 8);
ELITE - 1380 x 156 mm (count. - 8);
Perspective - 1380 x 156 mm (count - 7);
COUNTRY - 1380 x 156 mm (count. - 7);
Vogue - 1380 x 156 mm (count. - 7);
ELIGNA WIDE - 1380 x 190 mm (count. - 8);
Perspective WIDE - 1380 x 190 mm (count. - 6);
Colonial - 2050 x 156 mm (count - 6);
Largo- 2050 x 205 mm (count. - 6);
Majestic Pro - 2050 x 205 mm (count - 6).

Tarkett.

Vintage - 1292x 194 mm (count. - 8);
Legacy - 1292x 194 mm (count - 8);
Woodstock Premium - 1292 x 194 mm (count - 8);
Woodstock - 1292x 194 mm (count. - 8);
Robinson Premium - 1292 x 194 mm (count. - 8);
Revelation - 1292x 194 mm (count. - 8);
Holiday - 1292x 194 mm (count - 8);
Fiesta Cool - 1292 x 194 mm (count. - 8);
PLAYSTYLE 832 - 1292X 194 mm (count. - 8);
Jungle 832 - 1292x 194 mm (count. - 8);
SELECT - 1292X 194 mm (count. - 8);
Lamin'art 832 - 1292x 194 mm (count. - 8);
POLARIS STYLE - 1292 x 194 mm (count. - 8);
Oak Art - 1292 x 194 mm (count. - 8);
Intermezzo - 1292x 194 mm (count. - 8);
COSY - 1292X 194 mm (count - 8);
ARTIISAN - 1292X 194 mm (count. - 7);
Infinite - 1292x 331 mm (count. - 6);
Lamin'Art- 832 - 1292 x 331 mm (count - 6);
Eden- 1292 x 192 mm (count - 9);
Sublime style - 1292 x 136 mm (count. - 9);
Liberty - 1292x 159 mm (count. - 7).

Ecoflooring.

Country- 1215 x 143 mm (count. - 8);
Villa - 1212 x 142 mm (count. - 8);
EPI - 1290 x 192 mm (count. - 9);
HDM - 1294 x 185 mm (count. - 8).

Egger.