Many plastic owners come from time to time to such a problem: how to adjust the balcony plastic door. In this case, the design may be loosely closed, the handle or loop is cleaned. The process of regulating the door device is not distinguished by complexity. You can twist and fix accessories in a few minutes.

Practically and conveniently issuing out the balcony will help plastic structures

Read in the article

Features of the design of the balcony door

PVC products are a suitable option for. Such structures are characterized by resistance to temperature jumps and influence. Such products have a small weight and do not become encumbrance for exposure to moisture and temperature drops. When creating plastic doors, the same profile is used as when installed.

Plastic products have certain advantages:

• thanks to the multi-chamber profile, it is superbly maintained and distinguished by good;
• differ immunity to any manifestations of the external environment;
• possess environmental and durability;
• characterized by unpretentious care.

Most often for balcony structures use glass top and plastic bottom. If there is a solid frame, the door is performed using triple glazing. This allows you to create a stained steel construction and increase natural.

The following design options are popular:

• sliding models that are moving using the groove system. When they are installed, it is required to observe tightness. Also, the installation is carried out on;

• With one and two sash, which is equipped with a hinge lock fitting. This requires adjustment of hinges;

• double designs with an impost. In this model, the sash opens, but insertion is placed between them - an impost;
• the shill version consists of two parts. At the same time, one is fixed in one place.

Great value has accessories. It allows you to make clamp more dense. The accessories are divided into inner and external. Internal elements are no different from. Inner includes door swivel handles, balcony latches, decorative linings and stationary handles.

Helpful information! The most important stage is the installation of the door frame. It is installed with the exact definition of vertical and horizontal directions. Then the design is fixed using selflessness and anchor bolts.

How to adjust the balcony plastic door: ways

Most balcony owners are concerned about the question: how to adjust the balcony plastic door. You can make the device setting on your own, which allows:

• apply regulators for removing wires of cavities;
• remove shifts in any direction;
• perform clamping clips;
• place a plate for the ventilation regulator under the handle;
• perform lubrication of all moving parts.

As a lubricant, a special oil composition is used, and a brush or cotton wand will be needed.

The table shows some doors setup techniques:

Picture	Ways adjustment
	Loop adjustment.
	Setting the position of the assignment.
	Methods for adjusting using a hex key
	Adjusting pressure.
	Features of the adjustment of the end of the balcony block
	Adjusting the clips.
	The diagram of adjusting the upper and lower loop.

Article on the topic:

With this task really cope without contacting the specialist. All you need to know about the peculiarities of regulating these structures, we collected in this material.

The main problems of plastic doors

If the balcony plastic door is not closed tightly, it is easily adjusted. You can encounter certain problems:

• the bottom of the panels when opening the plastic threshold. This arises due to the sedimentation of the structure, which is manifested in the summer with a frequent opening of the sash, as well as with a heavy double-blade;
• in the middle part of the blade, the flap hurts the element of the frame, due to temperature jumps and drafts;
• the canvas is not sufficiently adjacent to the frame, and cold air stretches from under the sealing material. This happens with insufficient fit to the frame;
• if you often open and close the sash, the handle begins to stick. At the same time, manipulations are done so that the handle stops fuddling in the nest.

Adjusting the climbing of the balcony plastic door is produced by a hex key. For work it will take flat and sacral screwdriver, roulettes and plastic strips.

Before setting up the design it is necessary to decide on the type of problem. Most often, there are difficulties in opening and closing of the canvas, at skews, when blowing and moving the handles. If the cloth falls down or the door is hardly closed, it is adjusted for a separate fittings, or a complete setting of all mechanisms is performed.

To find out whether a piece of paper needs to be repaired. It is put on the frame and closed the door. In those places where the leaflet without problems is pulled out the canvas not tightly pressed to the box. To detect the breakdown, the canvas should be circled in a closed state, and then the sash opens and the lines are cooked with the frame.

How to perform adjustment of plastic balcony doors yourself: video

It is easy to carry out the adjustment of plastic balcony doors on your own, special instructions will help.

Features adjusting the knob

The following problems occur with often:

• the handle turns not to the end or goes tight. If the setting does not help, then it is necessary to replace;
• if the handle is breaking, the pad is rotated at the base of the handle by 90 degrees and the two screws are tightened, which are hidden behind it. For this, the cross screwdriver is applied.

Replacing the seal

If there is a breakdown in the door, then it is often deformed. In such a case, it is with the same cross section configuration. Old material is removed from the groove with a screwdriver. Then the surface of the groove is brushed from particles of glue and dirt. When installing a new seal, you need to control so that it is tightened. Before laying the grooves is labeled with glue. This needs to be done in areas where the ends of the sealant will be placed.

Helpful information! For high-quality work, it can be equipped with a opening limiter and microlift, which prevents situations. The limiter does not allow loaves.

What to do when sagging?

Many people are interested in how to adjust the balcony plastic doors during sedimentation. To repair the repair, it is necessary to restore the cloth higher and move to the loop at the top. Then a certain sequence of actions is performed:

• the sash opens in a reversal position;
• with the application of the hex key, the screw rotates next to the loop. Then there are several turns on the right side;
• to get to the screw element, you need to remove the decorative caps;
• the screw turns clockwise and the door design is raised;
• checked freedom.

Helpful information! Furniture systems can be approached not only under the hexagon, but also turn a closet.

Setting with the middle side

If the balcony plastic door is poorly closed, then adjust the adjustment that can be seen on the video. When clinging the site of the canvas in the middle, the movement of the sash is closer to the hinges:

• the sash is allocated to the bottom loop, and then the key is inserted into the side screw and tightly pulls into the loop direction;
• then the same manipulations are carried out for the upper loop.

How to make custom adjustment?

Such work is made using shut-off products in the form of eccentrics. They need to move the pliers. So that the setup is more efficient, you need to explore the instructions represented by the manufacturer.

The setting is made several times a year. In the summer, the clash must be relaxing, and - more dense. At the same time you need to know how to adjust the balcony plastic doors for the winter.

Adjustment is as follows:

• decorative cap is removed;
• at the bottom of the carport there is a screw, with which the clamp of the clamp is changing;
• to change the clamp at the top, you need to adjust the screw itself;
• the sash swallows and holds the block driver;
• the hexagon is installed in eccentric and turns on the desired side;
• then the blocker is pressed to the seal, and the sash is placed in place;
• eccentrics are installed in place where the maximum clamp is performed. At the same time, the mounting bolt is slightly released, and then shifts to the desired position.

Helpful advice! For better design work, it is recommended to use machine oil to lubricating accessories.

Features adjustment with conventional fittings

It is very easy to solve: how to set up a plastic balcony door if the fittings are standard.

To adjust the door, it is required:

• remove decorative parts with sheds;
• using a hex key, unscrewing the screw on the reverse side;
• then a manipulation with a long horizontal screw is made. For example, that the sash does not cling to the upper part of the frame, you need to lower the upper screws and go down the cloth;
• several turns are made to check the design.

Article

Often, when installing balcony PVC doors, technical problems associated with the work of opening mechanisms and other structural elements occur. This is due to a variety of factors: impaired installation technology, shrinkage building, improper operation of the door. To eliminate small faults, you can do on your own - it is enough to properly adjust the plastic door, following step-by-step instructions.

Frequent causes of PVC doors faults

Adjusting plastic doors is carried out without delay when visual design defects are found in the following situations:

Door Design Tightness Disrupt

Recognize a malfunction can be thus. Open the door, and in the space between the frame and the blade insert a piece of paper. Then closes the cloth and try to pull the leaf on yourself. Paper is pulled out without effort with an insufficient fit of the closing mechanism. Similar actions are performed throughout the perimeter of the structure. The disruption of the door tightness leads to the appearance of condensate on the surfaces of the glasses.

Schedules and skewers

To determine the sediment of the canvas is quite simple - a pencil is performed with a closed sash. If in the open position the control line goes parallel to the frame, this indicates the absence of distortion. In some cases, the door saving can be determined by the formation of a through angle slit at the top of the design or friction of the lower part of the threshold of the threshold.

Friction about the door box

Difficulties in the opening and closing of the canvase are manifested as a result of friction on the box. This is due to the wear of the upper protective layer of the door, which can lead to damage to the metal-plastic profile and incorrect fittings.

Distribution or tight handle turning

The door handle may fall out due to insufficient fixation in the landing socket. The reason for this can be the incorrect or negligence operation of the fittings.

Another problem is a tight turn of the knob, which occurs as a result of damage or contamination of the key core or the knob itself.

Incorrect operation of the locking mechanism

This happens due to contamination, wear, or mechanism breakdown.

Such faults suggest that the PVC door to the balcony is in a bad technical condition and requires immediate adjustment.

Plastic Door Setup Process

Adjusting plastic doors involves identifying and eliminating all the existing faults. It is possible, accessories or individual structural elements are very worn, so it is possible to solve the problem only with their complete replacement.

Consider the most likely breakdowns of the inlets of the balcony euriskery that can be eliminated independently.

Working Tools to Configure

Depending on the size of the regulating and fixing structural elements, as well as the manufacturer's company, the following work tools will be required to configure locking mechanisms:

• a set of hexagons of various diameters;
• set of star keys;
• screwdrivers with a flat and crusade tip;
• passatia;
• plastic linings;
• means for lubricating sealing tapes;
• clean rag.

Adjusting door loops and canopies

Metal plastic doors are completed with hidden loops of the overhead type, the number of which depends on the functional and technical characteristics of the model. The loop adjustment is carried out horizontally and vertically.

Adjust the loop horizontally as follows:

1. Door leaf open and unscrew screws with loops located at the top. To unscrew the screws, you can use the key-hexagon of a suitable diameter.
2. Then the door to close, remove the decorative strips, which are designed to hide adjusting screws.
3. To prevent possible intercussion of the web, elongated screw at the top must be pulled out more than below.
4. To evenly move the cloth to the hinges or in the opposite direction, it is necessary to remove the lower decorative bar, tighten the loop and release the screws located horizontally.

Vertical loop adjustment is carried out to raise or lower the door. To do this, it is necessary to find the adjusting screw, which is located in the end of the loop below along the axis. In some models of products, such an element can be hidden under the decorative lining.

To adjust the door leaf over the vertical, the hexagon is used with a diameter of 5 mm. Making a rotational movement in a clockwise key, slightly lift the cloth and set in the desired position. Next, tighten the screw in the opposite direction and install the decorative bar.

Setting up door knob

Often the problem with the handle for the plastic door is associated with its loosening in the planting socket and the turning tight when opening / closing the web.

Setting the handle when it is loosened as follows:

1. The plastic cap at the base of the handle rotates 90 degrees.
2. Hidden screws are tightened with a cross screwdriver so as not to damage the housing of the handle.
3. The performance of accessivity is performed.

The handle is tight, the handle may be associated with the disk of the door canvase or breakage of the locking mechanism. After troubleshooting with the door position, the locking mechanism will work properly, otherwise it will be necessary to replace it.

If necessary, a faulty handle can also be replaced. To do this, it is installed in the "open" position, the screws are unscrewed from the seats, the entire castle is dismantled. The new handle is installed on the seat and fixed with screws.

Replacing sealing tape

If the door design is operated for a long time with saving or distortion, it can lead to deformation or damage to the sealing tape.

The high-quality seal is operated for 5-7 years, however, as a result of mechanical damage or malfunctions, its wear can occur much earlier.

To replace the sealing tape for a plastic door, you will need: scissors, new tape, silicone glue. The sequence of actions is as follows:

1. Neat dismantling of the old seal with priests and the purchase of a new product. It is better to choose a sealing tape of one manufacturer to ensure maximum design sealing.
2. After dismantling, careful sweeping of the grooves with the removal of adhesive residues and contaminants is performed.
3. To avoid displacement of the seal, silicone glue is applied into the corners of the thin layer.
4. The prepared sealer is evenly laid into the purified groove, starting from the place of fixation of the old tape. This should eliminate savings, tensions or assemblies of the material.
5. The joints are fixed closely, sometimes cut under 45 degrees.
6. The correctly installed sealer must completely prevent cold penetration from the balcony.

Alignment and tightening in height

To pull the door design in height and eliminate its friction about the threshold, you must twist the screw to adjust vertical.

The sequence of actions is as follows:

1. For the adjusting screw, the hexagon or key with the "Asterian" nozzle is used. Decorative lining dismantled with loops.
2. The door leaf opens to access the adjustment elements.
3. The top screw in the loop is tightened by a hexagon clockwise, observing a strictly vertical location of the sash.
4. With a substantial shift, the lower screw is adjusted. It is important to remember to raise the door, screw the screws clockwise to lower - against it.

Align the plastic door horizontally so that it ceases to flow, you can drive screws to adjust, which are hidden under the technological holes in the loops. To provide free access to them, the door canvas must be kept open.

When the door shift on the right side, the adjustment element is tightened against the clockwise, when the shift on the left side is clockwise. Thus, you can adjust the position of the door in the horizontal plane in the range from 2 to 4 mm.

In some cases, the door adjustment is carried out like this: a special tongue is pressed on the open door flap to transfer the design to microwing mode. It provides free access to the adjusting screws on the upper loop. After adjusting the door cloth returns to its original position.

Other door malfunctions

If the door managed to seriously seek other ways to eliminate the faults did not allow proper result, then it is necessary to carry out a small repair using the glass package:

1. Disasters the strokes that hold the glass.
2. A special blade from plastic or wood double-glazed window shifts to the side to eliminate the stagnation of the door flap.
3. In the resulting clearance, plastic gaskets are installed.
4. Next, check the location of the door and the installation of the strokes.

In some cases, the fault of the plastic door is associated with the locking of the castle. At the failure of a separate part of the mechanism, it is enough to replace it with a new element purchased in a specialized outlet. When the entire lock breaks, the complete replacement of the device will be required.

Plastic Door Fault Warning

To avoid expensive repair of PVC doors, it is necessary to provide a timely maintenance of fittings and design mechanisms in a timely manner.

High-quality door accessories of European manufacturers can withstand limit loads up to 130 kg, while the strength of the products of Chinese brands does not exceed 90 kg.

Provide uninterrupted operation of plastic doors allow two elements - the opening limiter and microlift, which are not included in the standard product package. Therefore, they are recommended to be purchased separately before the installation of the door design.

The limiter is a special comb, which is designed to limit the opening of the door flap. This prevents possible sagging or blocks of the web.

Microlift is a device in the form of a movable plate or a roller, which is provided for dimensional and volumetric plastic doors equipped with heavy glazing. The microlift eliminates the sagging of the door cloth when it is closed, taking part of the weight of the door.

Solve problems with eliminating small faults of a plastic door should be able to be able to any home master. Similar structures are used for balconies, loggias, winter greenhouses and summer kitchens. Independent adjustment will allow you to properly exhibit the "Winter" and "Summer" operation modes, save money for maintenance and repair doors.

Sections Articles:

Adjusting plastic doors is a process that is designed to eliminate all sorts of problems that appeared during the use of the design. It doesn't matter how the door is the door and its components, the items break always, the more frequently used.

Most often requires the setting of doors, for the reason that the loops can weaken and fall out. As a result, the door stands unevenly, and draft ships blows from the opened slots. The root cause of the breakdown is to wear individual parts, but their quality play a considerable role. That is why it is not necessary to save on the quality so that in the future I did not have to think about adjusting the plastic door.

If you have problems with a plastic door, but you don't want to refer to the masters, you can fix the breakdown yourself. But for this you need to prepare and find out the answers to the following questions:

• In the same place the doors are details for adjustment;
• What problems can arise at all with plastic doors and how to solve them;
• How exactly the adjustment of the plastic door.

What is responsible for adjustment

To configure the door, you will need a hexagon with a diameter of a 4 millimeter (most often), sometimes there will be no clients.

The first adjustment knot can be found on the bottom door loop, scrolling it with a hexagon you can lift or lower the door, depending on the direction of the twist.

Here you can find a node that shifts the bottom of the door to the right or left. Sometimes adjusting screws are honeclined by protective caps that are easy to find and remove. To move to the left or right, the top of the door must be twisted the screw, located at the top loop.

The pressure power of the door to the door box is regulated by the eccentrics, which can be found throughout the body of the door. Twist them, it is possible to achieve accurate adjustment of plastic doors and their tightness, by changing the clips in separate areas. In the doorway with a swivel-folding principle of work there is a way to adjust the clips of the entire top. To do this, scroll the screw located at the top of the door.

It is not easy to get to this screw, you need to put the door immediately and in the ventilation mode and in the "Naraspa" mode. From such a opening protects the built-in mechanism that can be circumvented. Just open the door, align the plate, which is located at the door of the door at the handle (parallel to the seal rubber) and rotate the door handle to the ventilation mode. This is a rather complicated procedure, so in order to know exactly how to adjust the plastic door in this mode, we advise you to get acquainted with the video.

Methods for adjustment with different problems

To correct the flaws, you need to know which screw for what is responsible, and under what problems to turn it.

This is due to the complexity of the design of the door and the abundance of all sorts of screws, the incorrect twist of which can lead to a complete disorder of the mechanism.

On request, the adjustment of plastic doors can be found many videos from professional masters, which will help in work.

Sagging

Over time, the input protection saves under its own weight, and due to the fact that is mounted in the air. This is one of the most common problems and at the same time unpleasant, since in this case the lower profile is running about the frame, and in case of complex cases, the door becomes not easy to close. In this case, we will definitely have to take care of the adjustment of the plastic door until the position was aggravated.

To fix this problem, you need to raise the door up. This can be done using a special opening in the middle of the bottom loop. By inserting and tugging the hexagon clockwise, we raise the door higher. If you need to lower the door, you will have to twist counterclockwise.

In the case when the frame is tiled only by the opposite door from the loop, the horizontal regulation of the upper loop will help. By inserting the tool into the hole and turn clockwise, we draw the upper door of the door closer to the frame.

Adjusting plastic doors from sagging can be carried out and independently, but instructions from the manufacturer are required for the purpose of destination of all screws and connectors.

Friction

If, when you close the opening, the door turns about the box, you need to know how to adjust the mechanism, shifting plastic doors to the left or right. First we take the lower part by scrolling the hex key in the slot in the bottom loop, and then we do the same trick from the top.

Bad presser

If there is a drafts from your door, then most likely we will slightly press the door to the box. This is corrected by adjusting the plastic door, namely, the eccentrics. The mechanism of their work is that when closing the eccentric climbs behind the clamping plate.

From this it follows that it is necessary to check each of the connectors to be checked completely equally equally. It is not necessary to believe that the stronger the twist - the more reliably the clamp, with an extremal fit, the sealer can disappear and stop performing its work. Masters recommend weakening clamping in the summer to give a sealing gum a little freedom and provide a small additional ventilation in the house.

Complex closure

Another common problem of plastic doors is to close them, it is necessary to apply force. Most often, power is required to apply when turning the handle.

Such symptoms indicate winter mode of eccentrics, and to facilitate closing you need to weaken the screws.

Before adjusting plastic doors, you need to view a learning video to know the required tightening level.

Another reason for the difficult closure can be a door mechanism zoom. In easy cases you can do with complete lubrication, in difficult situations you will have to disassemble the door and clean the system.

If the door is used for quite a long time, the handle can break. To correct this problem, turn the top plate of the handle base, and tighten the bolts under it.

Adjusting the doors from the GreenEQ loop

If the door has a lot of weight (more than 40 kg) and is often used, it is in most cases equipped with loops of the GreenEQ type. Adjusting plastic doors, and especially independently, it may become a problem, so before starting work it is recommended to view the video of the process. You can regulate in three planes:

• Vertical;
• Horizontal;
• Click to the box.

To access the hinges, it is necessary to remove plastic protection from them, which is quite easy to do. To raise or lowering such a door, insert the hexagon into the connector located at the bottom of the loop and tapping into one of the sides adjust. Remember that the adjustment of plastic doors begins with the bottom loop, and then the average and the top can be adjusted below it, which can be made independently.

To shift the doors to the left-right, you should screw or unscrew the screw located in each loop under the decorative disguise.

Insert the hex key from the end from the end of the hinge, and change the position of each of them in a circle. Now you know how to properly adjust the plastic doors mixed or weakened, using your own hands.

So, the adjustment of the doors from PVC is a simple process, but requiring care and perseverance when implementing with your own hands. Now you know how to adjust the plastic door, without causing specialists to the house.

Perfect and accurate design Metal-plastic doors, but it starts not clearly function. In the case of wooden doors, except loops, it can be caused by deformation of the canvas itself or box, plastic doors begin to "capricious" exclusively due to the malfunction of the mechanism. How to adjust the plastic door with your own hands, let's understand in detail.

Possible troubleshooting options

The normally installed and functioning door should be easily open and closed, do not pull the box in the target, and the adjoining should be uniform around the perimeter. The open door in the absence of drafts should be in a steady position.

The clamping mechanism is obliged to "bring" the door without a gap between her and a box. Check simply - a sheet of paper, squeezed between the entrance of the door and a box, should be pulled out along the entire length of the feed with some effort.
Failure to comply with any condition means that the geometry is violated.

Located a balcony plastic door or a shift displacement occurred relative to the box. All defects are corrected by adjusting accessories.

If the warranty period has not yet expired

this should make the company's service service that installed the door. Otherwise, you can call the masters. But those and good modern designs, which in the presence of instructions, independent adjustment of plastic doors is quite forces to anyone and requires a minimum set of tool - hex keys, screwdrivers and passage.

This article discusses the most common cases of adjusting swing plastic input (interroom) and balcony doors.

For pendulum or sliding systems, there are their methods.

Adjustment of plastic door with three loops: entrance

The interior entrances are distinguished by the profile thickness and glass package, but they have a loop like. And from balcony differences more significant. This is the type of loops, and the absence of a folding mechanism (for venting). Let's figure it out how to adjust the plastic door with three loops yourself.

Usually, three loops are installed on such doors - upper and lower, and the third can stand next to the top or in the middle of the canvas. In principle, this is the usual arrangement and the number of loops so that they normally "kept" the weight of the door. Differences may be in the design of the loop and the presser mechanism, and therefore in the adjustment.

Patch door loop (according to the type greenteq TB 100.ZD.K)

This loop with a decorative plank and the possibility of adjustment in three planes.

The horizontal and vertical offset occurs with the help of two screws, and the clamp is adjusted using the screw and the bar between the loop and the box.

1. To adjust the skew:

Adjusting plastic doors relative to the vertical axis horizontally (right-left), it is necessary to remove the decorative bar on the loop installed on the canvas. Initially, the door must be opened and unscrew the screw that holds this bar. Then the door is closed and the bar is removed. Under it there are 6 fastening screws under a screwdriver (perpendicular to the canvas) and one adjusting screw under the hexagon - parallel to the canvas towards the loop.

Screwing or unscrewing it, you can adjust the displacement of the door relative to the vertical of 5 mm in each side along the X axis.

2. To raise (and even lower)

the sash is used by adjusting screw turnkey, located in the lower end of the loop. It is closed by another decorative plank, which is simply "disassembled."

They can be lifted by 4 mm or lower the door per 1 mm, relative to the factory installation along the Y axis.

3. Plastic door mode: fine adjustment

(within 1.5 mm) is carried out with the help of a screw located in the upper end of the loop.

For the "coarse" adjustment, you must remove the door with the loops, and then the part of the loop that is installed on the box. It is attached to it through the planks that can have a thickness of 1 mm to 5 mm. Thus, you can additionally adjust the door to the door (along the z axis).

Door loop type WX

it has an adjustment horizontally to 6.2 mm, vertically up to 4 mm, clamp can be adjusted by a screw to 1.8 mm (if necessary, clamps can be improved by additional sleeves at the location of the loop mounting to the box).

1. Horizontal adjustment occurs with the help of a side screw located under a decorative lining on the loop that is attached to the door. Initially, it is necessary to unscrew the screw that locks the position of the loop relative to the "0" level. It is located in the body of the loop and runs parallel to the door canvas. Then you need to unscrew the screw, a stopping outer decorative hinge body, screening which, you can access the adjusting screw.

With its help, you can shift the position of the sash to the right or left.

2. Adjusting the clamp runs on the retaliatage of the loop (fixed on the door frame). It is necessary to remove the decorative cap from the end of the loop. Under it you can see eccentric with slots.

In order to free it, you need to unscrew the stopping screw (it is located on the side in the hinge body from the door side). Then, using a special key inserted into the eccentric slots, you need to deploy it to the desired angle and stall. Thus, it is possible to strengthen or weaken clamps.

You can use the usual plate or a wide flat screwdriver, but it will interfere with the adjusting screw vertically. In this case, it must be completely unscrewed.

3. The vertical adjustment passes using a screw screwed in the loop from below, through the clamping adjustment eccentric.

How to adjust the plastic balcony door

The adjustment of plastic doors passes on the same algorithm as the plastic window. Each manufacturer, accessories may have differences in adjustment methods, but in many respects they are similar.

Adjusting the plastic doors horizontally (x axis) to the right or left can pass with two screws in the lower and upper loop (depending on which part of the door is "lifting").

Both screws are visible with open sash. The bottom is located in the support part of the loop on the box.

The upper is in the retissure of the loop on the sash.

Spinning or unscrewing the screw, you can achieve a shift of the sash from the box or in its direction.

The vertical adjustment (Y axis) passes using the screw located in the bottom loop behind the decorative bar, from the outside of the door on the sash itself.

It is located in the end. Screwing it or unscrewing, the door raise or lowered.

Adjusting the climb passes by turning the eccentrics located in the vertical end of the door sash.

Initially, it is necessary to find out in which part the clamp is too free or strong. Eccentrics "work" in a pair with shut-off plates on the box. If the eccentric is located along the sash - the press is minimal, perpendicular to the maximum. Turn the eccentric with the help of the passage.

Another type of pressure adjustment of the door does not occur with the help of eccentrics, but with the help of a shut-off pin on the end of the sash.

It has a hole for a hex key and a checkpoint (risk). Depending on the position of this point, the clamp may be stronger or weaker. Adjustment of plastic doors and very similar.

There is a third type of adjustment of the climb, which occurs with the help of a response (shut-off) plate located on the box itself. It can shift relative to the box, thereby reinforcing and relaxing the adjoining door.

In addition, it is possible to adjust the plastic door of the balcony not only from the side of the loops and eccentrics, but also adjust the clamp from the folding mechanism.

First you need to learn open sash

But turn up the handle at the open sash does not give the mechanism itself. To remove the fixation of the handle, you need to press the "tongue" (checkbox, clip) in the door of the door, in the area of \u200b\u200bthe handle itself.

It can look different, but the principle of operation is one - in the closed form, the sash presses it and unlock the handle that you can turn up by installing the door to ventilating. If you open the door and press the "tongue" with hand, then the door in such a state can be folded at the top. But at the same time it is better to hold it on the weight - it will still be held at the bottom at the bottom of the lower loop.

The inner part of the mechanism of the upper fittings will open (usually "closes" the door). There will be one (or two) eccentric with adjusting screws under the hexagon.

With their help, you can press (or squeeze) the door in the loop area.

By pressing the "tongue", return the sash to the vertical state, after which the door can be closed.

These are the main methods of adjusting the mechanisms of different types of doors.

Information on the note : .

Adjust plastic doors independently video.

Each modern apartment has plastic doors to the balcony. They are distinguished by many advantages: ease of use, unpretentiousness in the care and installation speed. A possible problem arising after long-term operation of the mechanism is a skew and a loose fit of the sash. Therefore, it is useful to know how to adjust the plastic balcony door to eliminate loosening due to regular opening, closing and conducting.

Before proceeding to the diagnosis of problems and subsequent repair, it is worth understanding the design device. There is a base unit, as well as spare parts for a plastic balcony door. Moreover, among the accessories, there are both indispensable and optional details. As a rule, the following elements include in the door block:

• pVC-profile frames that connect special fasteners;
• folded, assembled by a similar door box principle;
• loops, thanks to which the design closes and opens;
• pen and latch for balcony PVC doors;
• sealer, providing tightness of the closure of the sash;
• glass of balcony door.

In addition, additional elements can be included in the device, expanding the functional of the balcony door: stoppers, mechanical or hydraulic sensors and other parts.

The device of the handle can be different: it can be stationary and mobile, one-sided and double-sided, popular-shells for balcony doors are popular. The last option is in demand in families with children, as well as smoking people, because the handle-shell allows you to conveniently cover the door, being on the balcony. For an apartment on the first floor of a good idea is a handle with a lock - a balcony latch for plastic doors, which allows to protect the balcony from the penetration of intruders.

When the balcony plastic door is required

The price of the balcony plastic door is quite high, but the purchase of an expensive high-quality model does not save from the frequent cases of the mechanism breakdown. It's all about its frequent operation, leading to a decrease in the density of the fitting of the sash.

In addition, the glass provides excellent sound insulation, and PVC guarantees durability. However, these materials are noticeably taking the design, as a result of which it begins to savor under their own weight and stops tightly closed. As a result, a tangible draft appears in the room, and the insulation of the balcony does not help.

Normal plastic door position as follows:

• if the door is open, it does not move independently;
• no shift sash;
• fold tightly pressed to the door box profile.

If all that is the case, the intervention in the door mechanism is not required. However, if you have noticed the slightest deviations, you immediately require the repair of plastic balcony doors. It's not worth pulling with a call to the master, because with each discovery and closing the situation will be exacerbated. As a result, this may lead to the fact that the balcony doors are not closed at all.

Helpful advice! If the installation warranty has expired, and you do not want to contact a specialist, you can see the video of self-adjustment of plastic balcony doors and eliminate the problem with your own hands.

Types of malfunctions of a balcony door

If you adjust the plastic balcony door with your own hands, it is important for the success of repair to determine the causes of the fault. Most often, the problems are as follows:

To test the door to the closure density, put the sash to the usual album sheet of paper. Try to drag the sheet around the door perimeter. If it moves easily, the design has lost its density and needs to be adjusted.

Also estimate also the density of the clamping of the seal: the unequal clamp of the gum, as a rule, speaks of a savage. Determine the offset side simply: Pay attention to the place where the seal is compressed and check if it has a track from the sash.

How to determine the disk of the door flap

If you suspect the design skew, cover the sash, and then spend the closed door with a simple pencil. Open the door and compare its outlines with the drawn line. The presence of irregularities indicates that the door is shingled. For the result accuracy, use the construction level.

Suppose, as a result of the measurements, you learned that the width of the drawn strip is 8 mm (the error is permissible in 1 mm). So everything is in order, and there is no door skew. If the width of one strip is 12 mm, and the other is 4 mm, it clearly indicates a disk of the door of 4 mm.

Note! It is sometimes it turns out that by the loop of the width of the strip is 3-4 mm, and from the side of the handle 6-7 mm. Such indicators say about the sewn of a 4-6 mm sash - this is a production marriage, and it makes sense to move such a door.

Check also the width of the opening on all sides of the frame. The difference in measurements should not be more than 1 mm. Otherwise, the opening will be in the form of a barrel - it happens when the middle of the frame is pulled to the wall more than the top and bottom. Such errors also lead to a delicate fit. Measuring the width of the sash on all sides, you define the correctness of the length of the imposte. The difference between the three measurements should not be more than 0.5-1 mm. With the indicators other than the indicators, the impost length differs from the necessary and causes the door skew.

How to adjust the plastic balcony door: step by step instructions

To avoid errors or random damage to the glazing of a balcony door (the value of which is high enough) it is necessary to figure out how to adjust the plastic balcony doors correctly. When working, it is not necessary to overpay for the wizard: you can adjust the balcony door with your own hands - the video instructions can easily be found on the Internet.

To work, you will need quite some tools:

• hexagon;
• crosshead screwdriver;
• flat screwdriver.

Instructions and video: How to adjust plastic balcony doors when sagging

If you notice that when opening and closing the door, it scratches the lower edge of the frame, it says about the provision of sash. Adjustment in this case can be vertical or horizontal.

Stages of horizontal adjustment:

1. Wide open the door to the rotation position.
2. Near the top loop in the end of the sash is a screw. Take the hex key and turn it out clockwise.
3. Remove the plugs covering the holes leading to the top screws.
4. Cliently tighten all the screws under the plugs.
5. After adjusting the mechanism, check whether the door is now free. If necessary, tweet the screws again.

To understand how to adjust the balcony doors vertically, do the following:

1. Raily lift the door and find the screw in the lower end of the loop, placed along its axis.
2. If the screw is covered with a plug, remove it carefully.
3. If you are twist screw clockwise, gently lift the door, but if they are against, lower.

Adjusting the clamping door and door knob

To tighten the handle for the balcony plastic door, you need to do the following:

1. Slowly and gently rotate the plastic cover at right angles.
2. Under the plastic lid, find the screws for fastening. Tighten them.

If the handle turns badly, sometimes it is enough to lubricate the castle with a special material, which contains no resin and acid. With a complete breakdown, it is worth buying a handle for plastic balcony doors, unscrew the screws, remove the old item and put a new one in its place.

Helpful advice! A good option is to install a magnetic latch on the balcony door. It will avoid too frequent impact on the door handle with each closure and opening the door, which will benefit from its durability.

If from plastic balcony doors blows, this is a faithful sign of a loose fastener. It is necessary to adjust the clips of the cloth plastic door. To figure out how to adjust the plastic balcony doors onto the clamp, find the locking elements on the door sash. They are responsible for the density of the clutch.

Using the key or pliers, rotate locking elements while the door does not come to the required position. Professionals are recommended to periodically produce independent adjustment of plastic balcony doors depending on the season. It is enough to figure out how to adjust the balcony plastic doors for the winter, and you can easily loosen the clamp in hot weather and seal in the cold season.

Sometimes the hinge adjustment does not help solve the problem, and then eliminate the cliff can be removed using the pin. For this you will need. To put the door to the maximum, install the axle perpendicular to the profile. In order to, on the contrary, to achieve a minimal clamp, position the axle parallel.

Replacing the sealer and door adjustment when scratching frame

It may turn out that adjusting the door clips did not bring the desired result. This is because the rubber sealer was worn out, and any doors' adjustments are meaningless without replacing it. For this you need:

1. Pull out old rubber. This is done without much effort and additional tools you will not need.
2. Remove contamination from the inner part of the groove.
3. Place a new seal. Watch the side bend to come to the end of the sash.

Helpful advice! To facilitate the work, remove the sash with the frame: so access to rubber gaskets will be free and from the loop side. It is better to prefer the seal of the same manufacturer as the installed doors.

If the balcony doors are badly closed and hurt the frame, scratching its center, follow this instruction in self-adjustment of plastic balcony doors:

1. Lower the leaf to the bottom loop.
2. Insert the adjustment key in the side screw and tighten the leaf.
3. If the position of the door has not come to normal, repeat the procedure from the top loop.