Vintage doors with their own hands. Decor of old doors do it yourself

The original design of the doors of the house is not always the prerogative of professionals. With a great desire and creative approach, an unusual door decor can make any talented person. From our selection you will learn how to decorate the door with your hands five most accessible to the amateur in ways.

How to enjoy the door of the house with your own hands.

Door decor With your own hands, this is a whole set of stages and, according to the overwhelming majority of specialists, starting preparation is considered almost the most important part of the work.

As a rule, the owners are decided to originate the old doors of the house, bold people who are ready to reorganize Before unrecognizable, a new homemade door is rare, because the new thing often looks so good.

Let's start with the simplest, namely - what needs to be done before decorating the front door? This in this case is about the street, the front of the door canvase. According to statistics, more than 70% of the owners prefer to install metal doors on the entrance.

The easiest is the outdoor part of the metal door to paint under the stencil.

Steel structures outside are decorated only in two ways is staining and cladding with wood or MDF. In both cases, the old paint must be tried to remove the basis of the newspaper and degrease.

Remove the paint from the steel sheet in three ways:

  1. The simplest thing to buy washes and dissolve the coating. The method is fast and effective, but only if the door of the house goes outside. In the closed entrance of a multi-storey building, there may be problems with the neighbors, because the washout is "wild" stinking and harmful thing;
  2. You can still buy a nozzle in the form of an iron brush (cord brush) on the grinder and scrape the paint it, here is the only problem here is noise;
  3. Regarding quiet, harmless and at the same time, the effective way is to warm up the base of the construction hairdryer and scrape the coating with a spatula, but if inside the iron door is a foam, then the insulation can be melted slightly.

The most innocuous way to remove the old paint is to warm it up with a construction hairdryer.

You should not try to warm up the old paint with a soldering lamp or a gas burner, firstly, you can cause a fire, and secondly, at such a temperature, the metal can be partially deformed, and programs will appear on the tree.

Thighters and chips in the old shield from MDF or chipboard are sacrificed with an iron brush and put off with a putty, in this case the composition is taken for exterior woodwork, and when the putty will completely freeze, the surface is grinning emery and is covered with soil.

Complete applying putty with a spatula.

Preparation of the old door of the tree is not much different from the preparation of the same chipboard. First of all, you need to remove the top layer of old paint or varnish. In addition to the three above listed ways of stripping here, you can still take a sharp steel scraper and try to clean the paint to them, physically hard, but quite real.

Castle installation locations need to be prepared especially carefully.

When you managed to get rid of the old finish, you need to clean and slightly expand the visible cracks with a knife or chisel. Further take into your hands the grinding machine with the middle emery and grind the surface.

Align the surface to be aligned with one emery, so before decorating the old door, all serious defects need to be splashing, dried and walking the sanding machine again, but now with a subtle emery.

Acrylic putty is one of the best compositions for aligning wooden doors.

After that, look, dust and cover the tree with acrylic or latex soil. In principle, you can grind and manually, but it is long and hard.

Five doors decor ways

The decor of the tree inlet door (from the dwelling side) is no different from the artistic finish of the internal, interior doors, except for the compositions desirable to take waterproof and be sure to primitive the foundation.

Method No. 1. Coloring

The easiest way to decorate the old door do it yourself to paint it. It is difficult for the original door decor of the doors of the house, we mentioned about it, as staining is an integral part of most more complex finishes.

If the complex original door decor does not impark you, just paint it.

  • Despite the seeming simplicity, there are nuances in painting, so that the composition lay down exactly and without the leaks can be better removed from the loops and painted horizontally;
  • If you paint under further decoration of doors, then take acrylic or acrylate paint;
  • Nitroemal dries over an hour, plus it has a glossy shine, but such compositions on the solvent are made, respectively, they smell themselves;
  • Oil colors are the most affordable option, but for the decor they are not very suitable, there is only a simple staining.

Method number 2. Wallpapers for old doors

First about the wallpaper:

  • You should not take paper models, because the decoration should be not only beautiful, but also hardy, and paper will lose all kinds in a year;
  • The textured wallpaper with vinyl deposition is better to use for the placement of accents, that is, fragmentary. Plus, the vinyl is afraid of the claws of domestic pets;
  • The optimal version is the decor of old doors with fliesline and glass windows, they are durable, hardy, long retain the look, and most importantly do not reach during wetting.
  • But truly win-win doors decor with their own hands is a photo wallpaper. They are not much more expensive than standard phlizelin, and the effect can exceed the most bold expectations.

Competently selected photo wallpaper will turn the room in a fairy tale.

If the base is well aligned and troughing, you can safely buy ordinary wallpaper glue and glue on it. Without the soil, for example, when the doors of the doors of painted nitroemal, it is better to take PVA.

Cut the cloth in size.

Instructions are normal:

  1. Remove the handle and other fittings with the doors;
  2. Cook the basis;
  3. Apply the glue to the basis;
  4. Lubricate the wallpaper blade glue;
  5. Print wallpaper to doors, and drive the air with a special plastic spatula. While the wallpaper dries need to exclude drafts.

There is an important point here: if you have taken phlizelin or glassy, \u200b\u200bthen they are not smeared with glue, glue is applied only to the basis.

I drive the air and decorate the doors with polyurethane moldings.

The door will look original, can be said even gorgeous if you decorate it with polyurethane moldings. Moreover, it is precisely polyurethane and glue it to liquid nails or any similar composition. Foam cartoons look also, but they are easy to break.

Method number 3. "Creative Bardak"

This design of the door can be called really unique. After all, even the best wallpaper is the still serial product, and here you create your own unique picture.

Especially attractive, this way also looks also because it is not necessary to grind, nor put the doors, all irregularities and defects will hide a relief ornament, just to degrease or process to the foundation.

We will do the overall relief decoration of the door with papier-mache from egg trays. There is nothing complicated here: you take an egg tray and knead it, naturally he will rush, but it does not matter, because we do not need clear sizes.

We prepare and glue papier-mache.

It is glued to a papier-mache door with any high-quality glue, for example "moment" or you can use a glue gun.

The more the little things there will be, the original turns on the panel.

In addition to egg trays, we need different small trash. Here everything will go from buttons, to a broken computer mouse and the more diverse it will be this "garbage", the higher the likelihood of creating a truly unique decor. The smallest is also glued to the door, choose the drawing yourself.

For decor, any old things will fit.

After the door is decorated in a similar way, it must be painted, paint, how will the small details turn them into the overall picture. Roller and brushes here will naturally do not help, so you need to buy aerosol enamel, it is better to take a car, it is better. About 2 cylinders leave the canvas.

Aerosol enamel for outdoor and internal works.

Method number 4. Simplest decoupage

Door decoration with your own hands in the technique of decoupage can be different, but we are talking about the most accessible ways, then as the main material we will use paper three-layer napkins with a pattern

Decoupage Technique is not new, but always original.

We start work, as usual, that is, alignment, putty, grinding, painting. Further we need the napkins themselves and glue PVA.

We are not needed completely napkins, we are only interested in the top layer with a pattern, we separate it from all napkins. Be careful, the paper is very thin and easy to break.

Razing the napkins on the stripes.

Now napkins with ornament need to break into the stripes. Keep in mind: it is necessary to break exactly, and not cut, we are interested in elements with uneven edges. Since we ruined the right square, we will have two bands with smooth edges, they need to be postponed to the side, and all the middle to break into small squares.

Razing the middle strips into small squares.

PVA glue in the form in which it is sold to us is not suitable (very thick), so before decorating the door wept glue with clean water in a 1: 1 ratio.

The first strips with a smooth edge are glued. Take a soft bruster and first smear the diluted door fragment of the door. After that, gently apply the strip and smash it with a tassel on the plane. Not worth paying attention to small wrinkles, they will make the decor only better.

When the contour is saved, take for the arrangement of the middle part. The technology is the same: lubricate the basis and stick the smallest squares from the napkins, which we are folded separately.

PVA glue at normal room temperature will dry on average about a day. Then buy a transparent acrylic varnish and cover them the door. It is not desirable to take another varnish, since initially we painted the basis of acrylic paint and the reaction to another composition may be unpredictable, up to rejection.

Decoupage with paper napkins looks original and placed simply.

Method number 5. Fashionable Shebby Chic

If you explain easier, then the overseas name Shabby Chic. This is one of the many versions of artificial composition, after processing wood acquires a sewish noble shade.

Please note: the base here is not in excellent polished, but on the contrary, the surface is brocked by an abrasive ball. This ball is a rigid metallized brush that chooses soft tissues of the array, leaving hard, clearly selected fibers.

Binding of a tree with an abrasive ball.

Now you need to slightly polish our door abrasive circle. In the hard-to-reach curly coats, grinding will have to manually emery with a grain of P180.

Grinding wooden doors with abrasive circle or emery P180.

Drawing doors with your own hands in the SHABBY Chic technique looks like this:

  1. White acrylic paint is applied by the first layer and immediately wipes the napkin, after which we leave the door to dry for 2 hours;

  1. After 2 hours, we apply a layer of paint slightly darker and also quickly wipe the excess with a napkin;

  1. After 2 hours we applied the third, dark layer of the binder and wipe the napkin again;

We wash the napkin the next layer of the binder.

  1. After half an hour, we take the finishing varnish, cover the doors with one layer and leave to dry another half an hour (the finishing varnish dries quickly);

  1. After drying, we take the emery of P180 and grind to the tree, but without fanaticism, not evenly;

  1. The finishing of the 2 layers of the finish varnish is completed, the first layer of primer, second facial. Everything finishes finishes.

Output

Now you know how to decorate the old door five relatively simple ways, on the video in this article there are other options, they also deserve attention.

Mirror doors decor is fresh and original.

You are tired of your old doors and wanted to update them - no problem! Door decor - lesson for creative and interesting people. Yes, in the yard crisis, and many of us lack money for a full expensive repair. But this is not the reason to deny yourself in the comfort. On the decoration of doors at home you will not need large sums and tremendous waste. What can make the door decor with their own hands: paint, wallpaper, self-adhesive film, vinyl stickers or polyurethane moldings, and so on.

This is the easiest decor of the house doors with your own hands. This year, in fashion, relief doors painted in different colors with a smooth transition (gradient).

It looks beautifully a black door with a white stripe, gentle salad, lavender, light-purple colors.

Interior doors made of wood can be painted alkyd paint. This paint has an affordable price, but the disadvantages include a sharp smell that will not destroy long. Oil compositions are also popular, the disadvantage is that the paint dries a long time.

Acrylic paints require applying a varnish from above, as the acrylic itself is rather unstable to friction and wet effects. For wood optimal is nitroemal.

If your door from the chipboard is better to use the oil, or nitrocracy. Acrylak, thermoemal - perfect paint for MDF. Let me remind you the basic rules of staining doors:

Stencil design - master class

With the help of a stencil, you can quickly and gently make the décor of interior doors at home with your own hands. Stencil can be purchased, or do it yourself using cardboard or plastic. In order to make a stencil for doors - you will need a slim cardboard or thick polyethylene (the film is suitable for greenhouses).

When making a stencil, make sure that there are no very thin jumpers between the cuts. Print the picture you like. If the drawing is big - glue several sheets of paper together, cut out the shape and put on the cardboard or film.

We supply out contours and cut out small manicure scissors. Our drawing is performed by black and gray paint. The drawing is located or in the center of the door, or it will be several drawings - choose to you. In any case, the door canvas is required before work to measure and outline the place of the drawing.

Acrylic paints are perfectly suitable for this type of decor - they will quickly dry and do not spread.

To work, you will need:

  1. Scotch painted so that the stencil holds on the door.
  2. Sponge of foam rubber.
  3. Tassel.
  4. Wadth or clean napkin discs.
  5. Acrylic paints.
  6. Rubber spatula.

Before decorating the door, you need to prepare the canvas doors. We remove the spatula of the remaining paint, dirty stains, bold places. If there are small cracks or irregularities - it is better to put them. Next, it is better if you cover the door 2 layers of paint, both layers should dry. Fix the pattern on the prepared surface. It is convenient to make an ordinary scotch.

We prepare paint. Its consistency makeup should be like a thick sour cream. If the paint is liquid - add thickeners. Instead of a thickener in acrylic paint, you can add PVA glue.

We pour into a comfortable container (you can take a disposable plate) paint, mirawing in it with a sponge so that the layer is thin. Grow the sponge several times and put the paint in the slot of the template. We work lightly, as if "chpocking" movements. While the paint did not dry - remove the stencil. If somewhere lubricated the pattern - carefully remove the cotton disc is superfluous and tapping to the tassel. You can adjust the lines with a rubber spatula. If you do several drawings - first let the first dry, then can continue.

Here is shown how to decorate the wall. Similarly, you can also decorate the door.

With the help of a stencil, you can make a beautiful drawing on any surface, and the door is not an exception. To reagree with such drawings, the door in the apartment is not at all difficult. For this you do not need artistic talent, quite accuracy and taste. Such a decoration for doors will be a business card of your home.

Very simple and budget way of decor - Polyurethane door decor.

Moldings are figures, details that imitate stucco. Most often used in the classic interior. Moldings are most often made from polyurethane, less often - from foam. From polyurethane can get out of the decor. Details are glued, paint in the desired color on top.

In stores now such a large selection of a variety of wallpapers. One piece you will be enough for the design of several doors. If a piece of wallpaper remains after repair, it can also be used with benefit for you. You can stick the wallpaper to the entire door area, and you can - on separate details. Beautifully looks with embossed wallpapers, drawings with brick imitation.

Even if you decide to simply change the door handles on the products from another material - this will be enough for the decor. Perhaps the door with new handles will look completely different. And there is always the choice of this accessure. First of all, it is a handle from a natural tree. Tree color chosen under the door of the door.

Glass handles are used for a long time, but recently there are also handles with LED backlighting: these are all sorts of flowers, stars, balls, and so on. See how original they look:

Pick the door handle to your apartment style and so that you can comfortably open-close the door.

Very simple and budget decor of the old door can be done using self-adhesive film. Your old door should not have cracks, bulges, and other flaws. If the surface is uneven - you need to bring it into a good condition - otherwise the self-adhesive film will not fall, as needed and the picture will not work as it should be.

Self-keeper is sold in large stores, many options can be found on the web. There are such beautiful drawings that simply do not tear the look. Decorating the old doors with their own hands - a good opportunity to budgetly refresh the interior.

Consider some of the most simple ways to perform the interior door decor with your own hands with the help of girlfriend.

As you know, the doors are not eternal, and anything can happen. For example, scratches, chips, cracks appear on the door canvase. In this case, you can repair, replace or neatly decorated, scarce all defects.

Cut the door of wallpaper

Not only paper, vinyl and fliesline wallpapers can be used to decorate the door, but also fabric or liquid.

At the same time, the canvas should be prepared by removing the paint layer in advance, covers the irregularities, slit and polling the surface.

The printed primer layer will provide an additional clutch of the wobbly canvas with the door surface.





Wallpaper can be covered as completely all the canvas and panels, cutting out pieces of the suitable size. Do not forget to find the glue suitable for the type of wallpaper and dilute it according to the instructions.

Wallpaper classic


The cut by the wobbly cannon with glue and apply to the door, watching the jams and distortions to be formed. We smoothen the wallpaper with a soft cloth, roller or a wide plastic spatula. The surplus neatly cut the stationery knife. Additionally, you can decorate, gluing on top of the wallpaper frame from foam plinth.

At the time of drying the wallpaper, it is advisable to close the windows in the house and eliminate the appearance of drafts, sharp drop temperature.



the cloth


The door decorated with a cloth looks very unusual and attractive. In addition to the standard surface preparation, the attention of the tissue itself should be paid, finding out the degree of shrinkage.

Cut a small piece of fabric, measure its dimensions, wet water and dried. After drying, we re-produce measurements, comparing the testimony and finding out the degree of shrinkage. If the value is large, then the entire cut of the tissue before decorating is also wetting and leave for drying.

Note! You can use not only a solid cut of the tissue, but also cut fragments of different colors and textures. This technique is called "Patchwork" and is often used by designers in the design of the premises.

Casein glue is best suitable for the fabric, the composition based on CMC, as well as the Mastics "Bustilat" or "Gumilaks". We apply the adhesive composition on the fabric and apply it to the door, smoothing the spatula. When the door passes, it is important for fragments to follow their geometricality, otherwise the work will look inactively.


Additionally, decorate the door can be beautiful furniture cloves, shiny nylon or leather cords, paint for fabric, bagent frames.

- Universal. They cover not only walls, but also doors, creating unimaginable patterns and compositions. At the same time, you do not have to mess with cutting cloth. However, the door will not be exposed to moisture. Consequently, to decorate the door in the bathroom or in the kitchen, this method is unacceptable.


To work, it will take dry wallpaper mixture, several spatulas of different sizes, a hopper pistol, roller, transparent varnish, a kel.



Decorating the door of the mirror



Very unusual door finish can be made using mirrors. Such a decor will not only attract universal attention, but also visually expand the space of the room, adds light. However, cutting and attaching a classic glass mirror is very uncomfortable, good has an alternative - acrylic panels with amalgama, which has excellent reflective ability.

Acrylic mirrors are produced in a wide range of colors. You can choose any hue or several to make a mirror panel. Plastic panels are not fighting, easily processed and attached to the doors, have a minor weight. The cost of a mirror plexiglass is not the lowest, but quality and aesthetic qualities fully correspond to the stated prices.

ThicknessColorTrademarkSheet size, mmPrice per sheet, rub
2
silver
SPD (Italy)1220*2440 5950
2
silver
Plexiglas Mirror (Germany)2050*3050 11150
3
silver
Plaskolite (USA)2050*3050 14000
3
gold
Plaskolite (USA)2030*3050 15700
3
gold
Plexiglas Mirror (Germany)2030*3050 16000
3 red, Blue, Green, Orange, Yellow, Black
(Color shelled)
Extrusion Acrylic Code Zenocryl Opaque XT2050*3050 10989
3 color transparent (red, orange, yellow, light blue, blue, green, purple)1220*2440 5453
3 fluorescent-transparent (yellow, pink, brown)Cast acrylic shower Zenocryl Transparent1220*2440 5075

Before attaching the mirror plastic on, you should thoroughly align the surface, deepening the nails hats, stinking and sailing with putty all irregularities / notes.

On the door and the opposite side of the acrylic canvas, the primer of deep penetration is applied. After its drying, the folded panels are fixed with double-sided scotch and mounting glue. For convenience, use mounting suction cups, with their help it is much easier to gently glue the panel to the door canvase.


As one of the options for decorating, you can consider figured acrylic mirrors. Such a mirror can be attached in the center of the door or purchase several elements and compound them beautifully. Usually small parts are produced with an already applied adhesive layer.



Even from such a simple material like buckwheat husk, excellent works. The cost of material is minimal, but also the service life of such a coating, unfortunately, it is impossible to be called too long.

Step 1. Remove with the door with a layer of old paint, an existing vinyl coating, eliminate all irregularities with putty.

Step 2. Remove the door with loops and put on the floor / stool / table. Color the door canvas with dark brown paint. If there are glass inserts on the door, protect them with painting scotch.

Step 3. Duckly lubricate the root door with a plow glue, lay the husk, distributing it with his hands. If necessary, add minor gold sparkles.

Step 4. Cover the door with transparent varnish (glossy or matte). It is advisable to apply three layers to consolidate buckwheat on the door canvase.

Beautiful door is ready. To make the door not from the general design room, the same way decorate the picture frame and place the creation on one of the walls.


Decorating the door in the style of vintage

Vintage is the sophistication and refinement, the beauty of artificially aged things, harmonizing with a chic of individual decorative elements. Vintage door will become a piece of art, an exclusive element of the interior.

For decorating it will be necessary:


We will combine the staining of the door with the decoupage technique and add decorative elements in addition. Works will be performed on the already removed from the loop, the sputum and thoroughly polished door laid horizontally.

Step 1. Color the door white. The paint is applied a wide brush with rigid bristles in one direction, a thin layer.


Step 2. When the paint dries, gently grinding it with a rough sandpaper, achieving the effect of "antiquity".

Step 3. Getting to decorating the fillets or the central part of the door. We tear your hands on small pieces of totebooks and old newspapers. Draw on the door with a pencil box for rectangular or square form. Lubricate outlined PVA glue areas. Immediately chaotically lay out paper, smoothing out her hands. Top we apply a transparent varnish in two layers.


Step 4. On the perimeter of the sections of the sections of the plots, fasteners on the mounted glue glue black glue.

Additionally, you can decorate a beautiful wreath, a large lace bow or plastic beads imitating pearls (glue-based).



There are many other ways to decorate doors. Operate the materials available in your home arsenal, connect the fantasy and create your own masterpieces.


Prices for entrance doors

Entrance doors

Video - a variety of ideas for decorating doors

Video - Pattern on the door

Video - independent door decoration

11 best manufacturers of interroom doors

Photo Name Rating Price
#1


El "Porta ⭐ 100 / 100
#2


TriaDoors. ⭐ 99 / 100
#3


Status. ⭐ 98 / 100
#4


Sophia ⭐ 97 / 100
#5 ART DECO ⭐ 96 / 100 1 - Voice
#6


Profildoors. ⭐ 95 / 100
#7


ONYX ⭐ 94 / 100
#8


Belwooddoors. ⭐ 93 / 100
#9

Matadoor ⭐ 92 / 100
#10


Volkhovts ⭐ 91 / 100
#11

Alvero ⭐ 90 / 100

Doors El'Porta.

Doors El'Porta. - These are doors with Italian architecture produced in Russia. Models of modern design and trendy shades, materials of the highest quality. EL'Porta interior doors are produced on modern Italian and German equipment. Various decorative doors coatings allow you to choose the optimal option in terms of price and performance.


Doors El'Porta.

Characteristics:

  • 3D-graf is a structural decorative material of high density. It is distinguished by a pronounced texture, medium wear resistance;
  • ecoschpon is an anti-vandal decorative material that imitating the cut of the real tree. High wear resistance, resistance to mechanical damage, fading, moderate resistance to humidity;
  • aqua Doors - Doors that are not afraid of moisture;
  • enamel is a multilayer material that imitating enamel, but possessing higher.

Doors El'Porta.

- Each product is an effective combination of priorities for modern materials, trouble-free accessories, successful construction and design solutions. Extremely appropriate such doors in rooms decorated in modern styles of Heytec or minimalism.

Characteristics:

  • the modern innovative coating Renolit (Germany) is highlighted in durability, durability and environmental safety;
  • neutility for care. It is enough to be enough to wash with conventional facilities for furniture (not containing abrasives);
  • doors can be installed in any room, even with high humidity;
  • convenient in operation, as well as durable and reliable.

- Stylish minimalistic design will like the modern citizen. A rich selection of textures and finishing options allows you to harmoniously enter these doors to a new one, as well as in the already finished interior. Telescopic doorway - This is a structural solution of the door frame, allowing you to adjust the wall to the wall of any thickness.

Characteristics:

  • due to the telescopic effect, the design is suitable for walls of any thickness. Thanks to a more dense fit to the wall, the box is not thrown over time;
  • harmless material based on polypropylene;
  • a combat array of Angarsk pine is used to ensure the stability of the frame, low weight of the canvas, as well as the environmental safety of consumers.

- Sofya doors are author, designer product, impeccable European quality and operational service. Factory "Sophia" performs a full cycle of creating a product from the design of the design of each door collection with Italian designers, the development of manufacturing technologies with German engineers.

Characteristics:

  • painting doors based on safe components based on acrylic, which are used in the medical industry;
  • the absolute accuracy of all the joints in the most unusual collections;
  • careful selection and research used;
  • environmental, durable and durable in operation.

- Direction Design by ArtDeko is interior doors for true connoisseurs of beauty and comfort. Warm shades of natural wood, sophisticated forms, luxurious decor of classic doors will be a real interior decoration. The manufacturability and laconic forms of doors in the modern style are an example of high design for adherents of minimalism.


Characteristics:

  • a veneer from the tree of valuable breeds, such as oak or ash;
  • inserts from transparent, matte, colored or pattern glass;
  • they are manufactured on high-tech equipment by qualified specialists using high-quality raw materials and materials.

- This type of door constructive, is a collapsible design of individual elements (CARG). The main advantages of this constructive is its high maintainability, thanks to the ability to replace any detail of the door during operation and a huge range of various models, both in modern and classic style.


Characteristics:

  • resistance to chemical and physical influences;
  • the peculiarity of the coating is its pronounced deep "brash" structure with a glossy lacquer one-photon surface or a matte varnish monotonous surface;
  • completed by the German loops "Simonswerk" and the German castle "KFV".

If the old door lost its initial look and defects were formed in the form of scratches or cracks, it can be easily renovated, decorated with original drawings of its own version. They can be done both on ready-made templates, and giving away the flight of creative inspiration. The main thing is that the drawings on the doors fit the overall style of the interior and gave it a special charm. This method of restoration helps to significantly save money, as well as find a worthy use by its artistic talents.

Old doors are not necessary to change new ones, it is enough to close the cracks and gaps with a special mastic and decorate with decorative painting. Properly chosen drawing will not only revive the interior or change it beyond recognition, but also give the room comfort.

Main types of painting:

  • Template painting;
  • Aerography;
  • Art painting with acrylic paints.

For template painting, you need to purchase special stencils or make them yourself. Reusable patterns are sold in art salons, but the cost is high enough. If you plan to apply the same picture to all doors in the apartment, then the expediency of their acquisition will be fully justified. But for one-time use you can cut the stencil from cardboard or film. Advertising agencies can also order the manufacture of a template printed on a vinyl film according to customer sketches.

When independently manufacturing a template, it is not recommended to use drawings with a large number of small elements or with thin jumpers between the patterns.

For applying airbrushing, you will need two professional instruments: an airbrush and compressor. Paints can be used acrylic on water based or nitroemal. The metal entrance door professionals are advised to paint nitroemal, and interroom - acrylic or oil paints. With the help of airbrushing, you can draw absolutely any drawing in the presence of special skills. Beginner lovers of this type of painting are recommended to select simple drawings in the form of abstraction. You can also pre-make templates that the artist will use during the application process.

Art painting is the drawing of drawing with brushes directly on the door canvas. It can make almost anyone in the presence of minimal art skills. Even in the absence of the talent of the artist, you can simply redraw a picture from a book or the Internet. The main thing is to choose the color and make sure that the drums are not formed.

Beautiful drawings on the doors do it yourself on the template

The easiest way to decorate the door is a drawing on it using a template that is easy to make yourself at home. To do this, you will need a cardboard or a dense polyethylene film.

Sequence of work in the manufacture of a stencil:

  • Draw the contours of the future drawing on paper or print on the printer;
  • We transfer the image to the cardboard or film, rubbing the contours with a simple pencil or marker;
  • Gently cut the pattern by the stationery knife or manicure scissors;
  • Fix stencils on doors using painting tape or special glue.

After reliable fastening the template, the ornament of acrylic paints is drawn, which after drying is covered with furniture varnish.

It should be remembered that the drawing is applied to a pre-prepared, degreased and painted surface.

Using stencils, you can also separate the doors with embossed plaster or liquid wallpaper.

Creative Decor: How to draw a stained glass door

Doors with glass inserts suggest infinite opportunities for rampant creative fantasy. They can be drawn or stained glass windows, as well as lay out the pattern with a mosaic. The main thing is that the door can withstand the weight of glass mosaic tiles.

In building stores, a ready-made stained glass film is sold, which only needs to stick on the glass. But to create a real masterpiece will have to take advantage of decorative mastic, which will imitate metal contour, and special stained inks. They are abolished even on the embossed surface.

The phased process of creating stained glass:

  • Glass is desirable to remove and put horizontally;
  • Mastics are laid out on the glass symmetric or arbitrary patterns;
  • After drying the mastic, the composition is painted in stained in paints;
  • Then the glass is inserted into the panel and securely fixed with the help of strokes and small nails.

The contours of mastic are covered with gold or silver paint to give them metal shine.

How to draw an open door in the interior

Sometimes to implement creative design solutions in the interior you need to portray open the door, in the opening of which the garden, river, forest or even a throne room can be seen. To do this, it is enough to have minimal art skills, as well as limitless patience and effort.

Step-by-step image of an open door:

  1. First you need to find the picture with which the image will be redrawn. It is desirable that the drawing is great and clear, with hand-drawn details.
  2. Drawn shared door contours and landscape, which can be seamless. It should be done as symmetrically as possible.
  3. Clearly drawn the smallest details of the future drawing.
  4. At this stage, you can outline the contours of incident shadows, but it is not necessary.
  5. The drawing is neatly painted with acrylic paints.

If you deposit open doors, it is not possible or the picture was hopelessly spoiled, it is possible to correct the position with a photo wallpaper with a similar image that can be bought in any construction store or order individual printing.

Beautiful drawings on the doors (video)

Beautiful painted doors will decorate any interior. You can attract children, older than four years old. They can perform painting with acrylic paints with the help of a stencil or circle, pre-applied with a simple pencil, contours. This joint creative process will give many unforgettable minutes as parents and children and will help to transform the room without much cash costs.