Installation of fences made of metal stakes with your own hands - Available for self-execution Fencing option.

This embodiment is widely used not only in conditions of country construction, but also in the city design of the house territories.

Such structures are characterized by durability, external attractiveness and simple installation.

Metal stakenik is currently an excellent alternative, which has become a traditional, profiled flooring. Staketins are much easier, and also more convenient in terms of transportation and installation, and the presence of a special coating serves as a beautiful metal protection against corrosion changes.

The main advantages of erectic fences are presented:

• reliability;
• durability;
• external attractiveness;
• unpretentious care;
• ease of operation;
• fire safety;
• light traffic.

Among other things, the bar is available at cost, they can be easily installed quite easily or, if necessary, replace.

Having decided to make a fence from a metal stakenik with their own hands, it must be borne in mind that the presence of sharp corners at the ends of the slats can cause injuries, so if there are children or pets, it is advisable to acquire a material that has rounded tips.

Preparation and marking of the territory

Thanks to an attractive appearance, a fencing based on a metal stakenik, widely used in different landscape design styles, and also perfectly combined with various construction and finishing materials.

The assignment of the fence is the zoning of the territory, the design of flower beds and the palisaders, so it is necessary to approach the preparation and markup of the construction site very carefully:

• cleaning the territory, including the dismantling of old fence, as well as all interfering economic buildings;
• drawing up a detailed plan of the site, including capital buildings and locations of underground communications;
• drawing up a collection of fence based on a metal stakenist, including a point mark to install support structures;
• removal of vegetation and garbage, including the level alignment in accordance with the construction of the fencing;
• transferring a schematic plan for terrain.

The supporting pegs are required to be installed on each turn, as well as when changing the trajectory direction of the installed fence. During the markup process, the place of construction of the wicket or gate is determined, and the need to summarize electrical communications to connect the portable lifts are taken into account.

It is important to remember that in the process of planning a place for mounting the gate of the tight type, it is necessary to ensure the most leveling area suitable for the construction of a standard foundation.

Preparation of holes for support pillars

Ershrester in the fence structures perfectly harmonizes with very many construction and finishing materials that can be represented by stone, brick, wooden and metal elements.

Methods for installing support pillars

Depth, dimensions and distance between pits under the poles may vary depending on the material and structural features of the support.

Most often, the metal stakenik is mounted on supporting structures based on the columns from the profile pipe with a cross-section of 60x60mm or 80x80mm, with a wall thickness of 2-4mm. The installation of a lightweight support structure is possible due to the absence of sailness, as well as low wind and power loads.

The technology of preparing the holes, as well as the subsequent installation of the support pillars, is as follows:

• preparation of holes by means of a bera or a bayonet and syc spade to the depth of the ground freezing or approximately 1.1-1.5 m;
• flipping on the bottom of the pits of standard sandy-gravel pillows;
• installation of support pillars, alignment of them in height and vertical using a construction level, as well as the subsequent backfilling and sealing of the soil.

Installation is required to start with installation of angular columns. On too loose or unstable soils, it is advisable to perform standard concreting, which will make the installed reference structure as strong as possible and durable.

Necessary for mounting a fence made of metal stakenik The number of columns should be calculated based on the distance between the supports in 2.0-2.5m. It is no longer needed to make a gap, which is due to the insignificant weight of the metal stakenik.

How to strengthen lags?

The basis of the frame for mounting the metal stakenik is not only supports, but also transversely installed, upper and lower transverse lags.

In concreting of the support pillars, the procedure for fixing frame crossing is performed only after the concrete solution is completely poured into the pits.

As a cross, it is advisable to use standard profiled pipes that have a cross section of 20x40mm.

The order of installation of the lag does not have a fundamental value, but it is very important to choose the right place under their fixation, as well as purchase high-quality fasteners.

Professional flooring - universal and inexpensive material for residential construction. And on how to build a fence from the profiled sheet, you can find out.

Another good option is a fence. Of course, it is more difficult to build such a fence, but the result is definitely worth it.

As practice shows, the most reliable is the welding of the cross. However, the lag is also allowed through galvanized screws. In this case, you need to prepare a building level, roulette, marker and screwdriver.

After installing the frame for a metal stakenik, you need to make it a thorough cleaning, priming and paint staining for metal.

The upper transverse lags are mounted at a distance of the half meter from the upper edge of the support, and the lower crossing is at an altitude of 30 cm from the surface of the soil.

Mandatory horizontal verification is carried out by the construction level.

Installation of metal stakenika

Currently, the production of a metal stakenik of the P-shaped and M-shaped type, as well as models with a rolling, semicircular and classic shape are established.

Ershtroker allows you to equip one-sided and double-sided fence. The bilateral construction of fences from the metal stakenik is good because the fence does not have lumen, but ensures a sufficient circulation of air masses.

At the mounted frame are fixed by the plates of the Ershrokel. Only four screws are used for fixing each plank, two of which are installed in the upper crossbar, and two in the lower lag.

The distance between Staketins may be selected individually, but as practice shows, the fastening of slats with an interval of 50-100mm is optimal.

The construction of the fence of the bilateral type involves the fastening of the staketin in a checker order. Most often, for this purpose, M-shaped strips are used, installed with a 05mm gap, which allows you to give the erection to the venizable fencing. It is desirable that the shade of the used screws has coincided as much as possible with the color of the fence.

In the process of screwing the fasteners, it is necessary to observe the limit accuracy, since even a slight disruption of the integrity of the polymer coating in stakes negatively affects the appearance and operation of operation.

Installation of the top plank of the fence

The intake elements, including the top bar, are the recommended attribute when the design is erected by almost any fence. Most often, in the process of manufacturing intake planks, the method of cold rolled steel sheets and subsequent galvanized them are used.

Finished fence made of metal stakenik

Quality strips do not have a seam or a casual compound, and the polymer coating allows you to choose the optimal option to the fence of any color gamut.

The correctly selected, high-quality accumulator in the form of the top plank allows not only to decorate the design, but is also a very good protection of the edge from moisture. Among other things, the edge gives the stiffness to the fence.

Each European food is a fairly weak fence element, so the union by means of a plank contributes to a significant increase in strength and positively affects durability.

The optimal is the combination of non-rigid elements, and the presence of ribs of rigidity allows you to perform one-sided trimming during the installation.

Those who want to stand out, should be closed to. The translucent material looks like a fence quite unusually, and at the same time it has amazing strength.

Useful video

Instructions for mounting a fence from a metal stakenik from the project "City of Masters":

Under the compliance with the installation technology, the fence based on the metal stake will not require increased attention and serves several decades, while maintaining its decorative appearance.

Make a fence made of metal stakenik with your own hands - the task is simple. For many years, galvanized hedges have been used in urban and country areas, where they have proven themselves as durable and durable facilities. The fence made of metal stakenik is a fairly simple design that can be independently erected with a minimum of cash, time and strength costs. The main thing is to arma certain knowledge and tools.

Option of finished fence

Stakenik fence

This is the most suitable for the home of the fence. Well watching fences for giving from a metal stakenist.

His popularity is easy to explain:

1. The inexpensive type of fence is available to any wallet.
2. The structure is simple, the usual, concise.
3. Metal hedge is suitable for urban and household plots.
4. Make such an iron fence is easy.

The dacha fence from the metal stake should be high enough and strong, as well as perform decorative functions. For owners of a residential building, the main thing is to protect against penetration and aesthetics. It can be destroyed for decorative purposes or as a fence of a holiday destination.

Fencing of the yard

Execution options

Metal stakenik - a laconic hedge without additional decorative elements and designer sizes.

But the types of metal stakenik and its shape are different:

1. Ershtroker "Wave". Sections such a hedge are attached so that the top line is first ascending, and then - falling. So it turns out a beautiful fence.
2. Ershtroker "Gorka" - the top forms an ascending line, which smoothly rises. It is considered a classic kind of fence, design is universal.
3. Metal school "concave arc" - the upper edge forms a smooth downward line, the width of the gaps is the same. The fence will fit both in the urban and country landscape. These fences are universal.
4. Metalstock "Christmas tree" - the original drawing of the upper edge is suitable for a wooden country house.

Options and forms of a fence from a metal stakenist

In addition to the main presented types of metal stakenik, there are other types of it:

• canyon;
• peaks;
• blind fences.

Lestenka is a relatively new kind, fences of this type of place in any landscape. Blinds from a metal profile - a novelty of the construction industry.

Fender ladder from metal stakenist

Feats features

Metal hedge is made of a rectangular or semicircular profile. Metal thickness - more than 0.5 mm. The spans cover the galvanized layer for the anti-corrosion effect.

The photo shows a fence from a metal bag.

Hedge of Metal Stakenik

The fence is distinguished by a slight weight, the foundation for its installation is not needed. You can build a fence without complicated earthworks and strengthening the existing design, in contrast to the hedge of the professionalist.

For strength, it is necessary to conclude the support pillars to which lagows are fixed. You can make a stronger design on piles.

For weather resistance, the metal is covered with protective materials: polyester, polyester. The coating will give a beautiful glossy coating and resistance to burnout. How to paint it right, will show the scheme.

The fence has a long service life without additional care.

The strength is comparable with welded structures, and made from the stakenik inexpensively fence will not be difficult.

See also: Street frost-resistant closer for wicket: species and options

The basis of the fence is performed from galvanized - a reliable material that will last long. You can insert into the gate fences, if necessary. The gate from the metal stakenik is universal and durable.

Gate and Wicket Metal Stakenik

Options Coloring

Color the elevation from the metal stake in the method of one-sided and two-sided color.

The wrong side is covered only by a soil layer, facial paint. Such an option looks good in the country areas, it suits lovers of calm tones.

If a bright kind of fence is important with each of the sides, choose options with a double-sided coating.

The painting of the hedge is carried out by a polymer or powder dye, as well as for products from the professionalist.

Painted fence

In the polymer coating it is necessary to comply with technology. Broken with such protection withstands almost any mechanical impact. If scratch appeared, then the metal does not rust, since it has additional protection. Reviews about such a color coloring is the most positive.

Powder coating is no less durable if the technology is performed, but it is cheaper. The first layer is protective, applied to the fence stake, the second - powder. All layers are baked in special chambers.

Powder coating often imitate unscrupulous manufacturers whose products rust with the slightest damage. The polymer coating cannot be performed by a handicraft, so it is better. You need to buy a fence with high-quality coating.

Ready fence

Types of metallic stakenik fences

The hedges of this type are characterized by the installation method, the sizes of the spans and gaps between the elements of the structure. Their device is not the most difficult.

Methods of installation of fence

Metal fence is attached to supports that set in the following ways:

• concreting;
• logging by rubble;
• scroll into the ground;
• combined installation.

Installation scheme of fencing with brick columns

Concretion is the most reliable way to install support pillars. It is used for radical soils. The height of the support is not less than 1 m.

The photo shows a fence from the erupteer.

Distance between Plancami

Logging with rubble occurs on more dense soils, when one pillars will be not enough. You can strengthen the support with a brick crumb.

The drier in the soil is used for heavy soils. Supports are buried to the ground to a depth of 1 m and tram in the pits made. If the soil is not too dense, then the support will be more reliable. The height of the pillar is at least 1 m.

Installation of the fence in the soil

Dimensions and distance

The standards of gaps for the hedge do not exist. The distance is made from decorative and practical considerations. The big lumen between the profile is made in decorative fences. Calculation of the distance between the planks leads from the accounting of the width of one profile. The smaller the size, the more deaf fence. However, you should not make an elevation without cleansing.

The size of one span is chosen taking into account the perimeter of the part of the territory.

The height is chosen taking into account the individual characteristics of the landscape and the host preferences of the house.

Sections of EvroShthetnika

Types of fillings

One-sided - profile is attached only from the front side. The distance between the elements is not more than 5 cm. The fence from the stakenice is attached to a two-way method during the chess location of the elements.

See also: Profile Pipe Fence: Step-by-step instructions and photos

The location of the stakeholder in checkers is popular in spite of the large consumption of the material. The fence of the chess seems to be solid, it is impossible to see the territory behind the hedge.

Double-sided way of mounting fence

Combined (double) Filling method retains views of the surroundings. Part is filled unilaterally, a piece of chess. The size of the gaps take the same so that the hedge looked organically. A double-sided panelies often enhanced country sites. You can make a solid similar fence. This type of fence from the metallic stakenice is shown in the photo below.

Montage with your own hands

Features of installation do it yourself

Consumables:

• supports;
• wooden or iron horizontal lags;
• stakebread planks;
• screws (metal, wood).

Installation features

If the installation is carried out by itself, the wizard may need tools:

• drill screwdriver;
• shovel;
• riveter;
• scissors for metal;
• roulette.

A feature of the installation of such a design is the lack of a foundation for a height of less than 1 m with a height of more than 1 m.

Next, the calculation of consumables is necessary. Then make the markup of the site. To do this, remove the ground from the branches and leaves, set the supports of the metal stakeholder for the fence. Lags are stuffed on the support poles, galvanized planks are fixed on them. All installation work is carried out using a construction level to prevent the skeletal of the design. How to calculate the amount of consumable material, look at the video.

Montage with your own hands: Step-by-step instructions

Installation of hedge of the pile Palcol begins with the installation of supports and packing frames. Working on such a design is quite easy to perform a novice master, he does not puzzle the question of how to make a fence made of metal stakenik on its own.

The video tells how to install pillars for fence.

How to make a fence from Ershtroker, you can read by reference.

Installation of support

First make marking for mounting support. Pits of the necessary depths and widths in accordance with the sizes of the pillar. Strengthen the columns how much the design will require.

Drawing for installation fence

As a support, two scruitted profiles are used. You can make a fence from a metal stake on screw piles. Instead of profiles, take a profile tube. If you wish, make masonry from brick columns to fence from a metal stakenik.

Then the foundation supports are then exposed. Pour prepared recesses in the soil with a solution of cement fixed supports. Installation continues after complete drying of the solution, it is about two days. You can substitute brick backups for fixing.

Scheme for the installation of the fence

As soon as the supports are concerned, fasten the transverse lags. From the extreme top point of the support, a quarter meter retreats and make a mark. Conduct similar marking on other columns using the level.

Fastening fixes the upper crossing to the base. Similarly, the bottom planks to the metal are assembled, the size of the incidence from the ground should be at least half a meter. The wicket is trimmed separately. Metal stakenik can be attached.

Choosing a fence, the developer is usually guided by the following parameters:

The parameters listed above corresponds to the fence made of metal stakenice. Currently, the metal stakenik is represented by such a variety of forms and species that even the most demanding consumer can choose the appropriate option. Due to its manifold, metal stakenists are used on a wide variety of facilities, ranging from the fence of the country area or a private house, ending with the arrangement of pedestrian zones and airport fence.

Types of Metal Stakenice Materials

Fencing from a metal stakenice can be produced from several types of materials. Consider them in more detail.

Metal stakenatnik from profile galvanized steel

In the production of such a type of stakenice, the profile galvanized steel is ground, and then a polymer coating is applied to it, which ensures the service life of a fence to several decades. This type of fence is called Ershtroker.

Main advantages:

• with the help of Ershtroker, it is possible to do both a deaf and transparent fence;
• ershtroker has a huge variety of colors, shapes and sizes;
• in its production, high-tech material was used, which has a long service life, and due to the special profile it has high strength;
• installation of this stake can even make a person who has no experience in installing such fences.

Stakenatnik from industrial reinforcement or metal roths

In the manufacture of such a stake, the rods with a cross section of a round or square shape are used. They produce them from cold-rolled steel when processing a hot zinc, which causes their corrosion resistance. The cross section of a rod for a stake can be 12 x 12 mm, 14 x 14 mm, 16 x 16 mm. The thicker, the cross section, the solid the fence will look, but its value will, accordingly, will also be higher. If the stakeholder is based on the reinforcement, its diameter usually ranges from 10 to 16 mm. Separate elements are welded in the section. Then a special coating is applied to the sections. If desired, the section can be decorated with decorative elements.

Main advantages:

• the form of such a fence can limit only the fantasy of the designer. This type of stakenice forms a great combination with a brick and a stone, and the decoration of wrought elements makes it individual and unique;
• uncomplicated, but as a result and inexpensive installation;
• with proper anti-corrosion processing and care, this type of fence can serve not one dozen years.

Profile Pipe Stakenatnik

When creating such a fence, the pipes of round and square sections are used, which are welded with each other and then weld to the frame. Corrosion protection is made by hot galvania and polymer coating. These fences are strong and reliable, have a modern and stylish look.

The disadvantages of all listed types of stakenik, include the following aspects:

• compared to the installation of the fence from the proflist, the installation of the stakeholder is a longer process, because it requires accurate measurements when attaching each element;
• installation of a fencing from a metal stakenice requires a large number of fasteners.

Installation of metal stakenik do it yourself

Calculation of necessary materials

• correctly measure the perimeter by which the fence will be held;
• establish what will be the distance between the staketin;
• calculate the size of the gate and wicket;
• to determine how the elements of the fence will be fastened: it will be welding or anchor fasteners, a corner or mounting clip;
• clean the required number of columns, lags, as well as consumables (self-tapping screws, paint, primer). Lags may have a length of 2 to 12 m. When calculating the required quantity it is worth remembering that the supports for the metal stakenice are located at a distance of 2 - 3 meters from each other and that the load on the lags should be uniform. When choosing self-seep care, you should not save. They should be galvanized with ergonomic ships under the screwdriver. To calculate the required number of profiled bands, there is a special formula:

Ш \u003d З × (1000 mm - RZ) / (133 mm + RZ), where:

W - number of stakenik (pcs.);

Z - the length of the fence (M);

RZ - width of the gap (mm).

In case of installation of a deaf stake in a chess order, the received number of stakenik must be multiplied by two.

Attention! Purchase only a certified product corresponding to the GOST P 52246-2004, which regulates the metal thickness and the polymer coating technology. It will provide durability to your fence!

Metal Stakenice Installation Instructions do it yourself

When you look at the perfectly smooth fence made of metal stakenik, I can not believe that you can install it with your own hands. In fact, it is not such a difficult task. So, the plan of the fence is ready, the calculations are made, all the necessary materials are purchased. You can move to the direct installation of the fence.

Stage 1. Clearing the territory on which the fence will be installed. The old fence is disassembly. Shrubs, grass and other vegetation are removed. Align the surface to which the fence will be installed. In the corners of the perimeter in the ground, wooden peasants are driven and the beeps are stretched between them, for marking the territory. There are places where reference pillars will be located. After applying marking, the beep is cleaned.

Stage 2. At the second stage, it is necessary to dull poles for support pillars. To do this, you can use a conventional shovel, but it is better to use the brown. It will be much faster and more convenient. The depth of the pit must be at least 50 cm.

The distance between the supports, as mentioned above, should be from 2 to 3 meters.

On the bottom of the pit flood crushed stone. Then they install a pillar that should be perfectly smooth. To achieve this, use the construction level as often as possible.

You can drive back to the bottom of the pit with a sledgehammer. By installing a pillar, the pit is poured with concrete. Since concrete will stack a few days, the post must be strengthened using wooden support bars.

3 stage. Lags are installed on the support poles. Fastening is made using self-tapping screws. The mount can also be made by welding, but then the welding places should be treated with anti-corrosion coating. The frame for the installed fence is ready. If there is a need, you can paint it into the color of the stakenice or choose another color, combined with the tone of the staketing. If you purchased the framework details together with the stakenik, then paint does not need. Next, on the lags should be marked for fastening odaketin. This is a rather painstaking work that requires attention, patience and accuracy.

4 stage. We screw the stakes using a screwdriver and self-tapping screws to lags. The distance between Staketina depends only on your desire. But most often it is in the borders of 50-100 mm. The main thing is that this distance was all over the perimeter of the fence strictly the same. It is necessary to screw it very carefully so as not to damage the polymer coating of the stake.

In case you decide to make a fence two-way, attaching staketins from the inside in a checkerboard order, then you should leave the gap between the planks 35 mm. It will give the fencing the type of light and transparency.

In addition to the stake, you can purchase a cornice that will enjoy its appearance. It is attached as well as staketins, with the help of self-tapping screws.

5 stage. Installation of wicket and gate. They are fixed on the support pillars and set all the necessary accessories (clicks, deposits, etc.).

EuroShtage video installation:

On this work on the installation of a fence from a metal stakenice completed. Installation of metal stakenik is a fairly simple process, and the result is impressive. You get not only reliable and durable, but also aesthetically attractive fence of your site.

The dacha fence from the metal stakenik is best fits into the image of a recreation corner. Simple and simple in shape, it can not be suitable for the fencing of the site, and for the house. This metal fence sample is still relatively disseented in the market. But for the construction of Evrohstaper (Metal Stakenice) there are already several options for an elevator device with an excellent design and an interesting embodiment.

Beautiful fence of a private house

The use of metal elements as the basis of the fence, support pillars or piles for the fencing of household plots and DACK is known for a long time. But here is the stakenik metallic as the main material of the spans - the idea is relatively new and quite interesting.
The fence fever is a shaped metal strip with rigidity ribs, fastening holes.

Brick pillars

The dimensions of such bands may have some differences depending on the manufacturer's specificatic conditions. The basis of production is the rolled galvanized rolling or profiled sheet with a thickness of 0.8 to 2 mm.

The length of the planks depending on the purpose of the hedge can be from 0.25 to 2 meters.

The assortment of producers meet the following types of it:

• unpainted galvanized material;
• painted monotonous type of panels;
• types of stake under the tree;
• shaped species;
• anti-vandal types of material.

And this is only one of the varieties

Options and their forms

Fences made of metal stakenice or erupkener are only one of the types of fences. In fact, the types of metallic stakeholder include:

• performed from profiled galvanized steel;
• segments of structural reinforcement, square, circle or strip width up to 25 mm;
• planks from the profile pipe of different sections;
• Coated.

Each of the presented types of material has its own characteristics both in terms of installation and as a profile of plates, form of the upper part, fastening method.

In the form of slats from sheet steel, the most popular type of material from dacnis, they are:

• semicircular shapes;
• P-shaped;
• M-shaped;
• rectangular shape;
• planks with rolling ends;
• classic.

Decorative version of the hedge

For those who decided to make a fence from the stakeholder with their own hands, such moments will be important:

1. On the sites of large manufacturers for the fence from the stakenice, the calculator will make it possible to make the calculation of all necessary structural elements including fasteners.
2. The consultant will assist in finding the necessary information and prompt how to calculate individual nodes and elements.
3. How to choose the right project, choose the material and how to make basic operations, will prompt photos of the most successful fences with a metal stakenist.

Methods of coloring

The fence made of metal unpainted plates is much cheaper than with plates having a polymer coating.

Unpainted elements are painted:

• painting brush manually;
• using a compressor or spacing.

Painting is done in two or three stages: the first is a primer, the second - the painting enamel, the third - the coating of varnish.

Possible variety of colors and drawings

Types of such fences

Among the possible types of classifications, the fence is worth highlighting:

• according to the method of mounting the frame, support pillars and planks;
• according to the form of bases and reference pillars;
• by type of filling sections between columns.

Methods of installation

Installation of a fence made of metal stakenik has several ways to attach planks to the frame of the fence. In one case, the technology provides for fastening on transverse strips, as attached. In another case, the metal stakenik can be attached to the framework of special seats.

Vertical checker

Metal fence for the house with a rarefied location of the plates is mounted on a coated basis of two slats - upper and lower. This option is universal, it can be used under the fence "" when the plates are installed in a checker order.

Dimensions and distance

The calculation of the design elements is taken:

• the overall size of the construction is the length;
• the size of the functional elements, such as the wicket, the gate of the metal stakenice: their width and height, the number of sash and the opening method;
• supports, their size and installation method.

As a result of the calculation, initial information is obtained for introduction to an online calculator:

• number of blockage sections;
• the number of transverse jumpers and their size;
• section size: Height and width, distance between the planks in the section.

Multicolored option

Having calculated how to make a metal fence and how much the material will take it, you can take a standard option as a basis, the diagram of which it includes:

• the width of the span is 2.5-3 meters;
• height of 2 meters;
• the number of transverse lag per section 40x20 mm - 2 pieces;
• support from pipe 60x60 mm, 3.2-3.4 meters high;
• the number of material units is 100 mm wide with a sparse version with a gap of 80 mm with a double-sided mount - 12 pieces per month.

The fence is well combined with brick columns

Types of fillings

The calculation will be incomplete without the options for filling the spans can make their own adjustments to the final calculation. Among the types of filling can be:

• direct single barrage;
• double-sided installation option;
• installation at an angle;
• installation at an angle bilateral;
• installation of the type of blinds made of metallic material;
• single installation with the back wall from the professional leaf (used mainly for the gate);
• non-standard scheme with a change in the angle of inclination.

The photo shows a beautiful hedge.

Recently completed Installation of Hug

FEATURES OF MONTAGE

So, how to make a fence from a metal stake with your own hands, you need to figure out in detail. Fences, gates and wickets made from stake in checker, have a wider gap between the plates. This is done due to the use of elements of 10 or even 12 cm. In this case, the calculation and installation must be made as accurately as possible and carefully so that all distances are withstanding both over the width of the gap and the height of the plates.

Beautiful elevation option for a private house

To establish a fence from a metal stakenist, you may need a screwdriver with a set of bits, an electric door with drills and a level. The presence of these tools, the ability to work with them and determine the features of the installation of all items.

Installation

How to make a fence made of metal stakenik? The optimal variant of the quick-scale design is a fence of a metal stake in screw piles. For a more parade option, the fence can be a device for fencing with brick masonry as the base and design of columns. For both cases, universal techniques and work methods are used, shown in the video installation and framework.

Installation is carried out pretty quickly

Foundation Device and Mounting Frame

According to the planning of the site, the line of installation of the fence with the place for the entrance gates and wickets is placed. Further work is built according to plan:

1. Places marked installations

   Mounting work

   Set of spans

   The set of spans begins with markup with the level of points of installation points of the plates.

   The first plates are installed from the edges of the span at the same distance from. The distance between them is divided into the number of slats and an equal distance of the spans between them.

   Another option for mounting

   The installation of each element is carried out after checking the distance in the upper and lower parts between the plates. Double option is installed first from the outside, and then with the internal one. For more information about the set of spans, see the video.

   The final stage

   Make a fence from a metal stakenik with their own hands, the photo of which is presented below, will help several operations made after installing the spans:

   • with the help of the corrective composition, the scratches and chips on the surface;
   • apply a masking composition on a self-tapping screw;
   • install plastic plugs in iron base;
   • open the water-repellent brick elements.

   Installation scheme of vertical chess

What are the fences from Ershtroker

Metal fences from EvroShther are enclosing structures whose elements are:

• pillars from round or rectangular cross sections, brick, boot or concrete;
• staketins from galvanized or professional flooring with one-sided or double-sided polymer coating;
• cross lags.

When installing the fence from the European in turnkey, screws and other fasteners are used. When installing wickets and gates, hidden and decorative fittings of increased strength, locking elements are used. Hollows from Ershrester are complemented by wickets and gates, made also made of metal staketin or from corrugated flooring, forging, wood and other materials.

Beautiful fences from Errystechnik are offered in a variety of color schemes, color to the choice on the RAL scale. They can have a height from 1.5 to 2.5 m, to be one or two-row. When installing the staketing in one row between them, one or another gap is not exceeding the width of the RESEK themselves.

The advantages of the single-row fence from the stakenik:

• economical price for the temporon meter;
• good overview of related spaces;
• lack of thick shadow;
• effective ventilation of the site.

The so-called chess is more functional. In such a design, the installation of vertical elements is performed in two rows in a checker order. As a result, the fence made of metal rails of chess is obtained more dense than the one-row. When attaching the vertical elements between them, the gap remains from a few mm to several cm. The stub with chess is better protected from the street, it is well ventilated. The price of the route meter of a two-row fence from the Metal Ershtroker is higher, since it requires a greater number of materials, therefore, the installation is more expensive.

To install a fence from Ershrester, a ribbon foundation of a small width, brick, stone or concrete pillars can be provided. Installation of the intake design can be performed without the foundation on the supports of their pipes. In this embodiment, the hedge will cost cheaper, especially low from rails made of galvanized professional flooring without polymerization with a thickness of 0.4 mm.

Inexpensive single-row fences made of metal stakenice are ordered most often in the country and with a limited budget. Despite higher cost, chess barriers on a tape base with brick columns in Moscow are ordered often. They won due to presentability, high security qualities.

Colors of eurbicker

It is also possible to order another color according to the RAL catalog. Specify the presence of our operators.

Installation scheme of the collection of european height - 2 meters

Types of eurgaste

The stakenik is distinguished by manufacturing material and shape. There are wooden, metal and plastic products. The first are short-lived and without care quickly lose attractiveness. In addition, there are only straight wooden stakenists.

Plastic products are practical if they are made of high-quality material. In addition, they create less load on the frame. Plastic is well withstanding atmospheric influences, not rust and does not rot. Lack - low strength.

Iron stakenik is available in various forms. There are M- and P-shaped, rectangular and round. This is a suitable option that combines durability, strength and unpretentiousness in service.

The cost of the fence from the European serviceman

To navigate how much the fence from the erupteer mounted turnkey, read the price. In it, rates are given for the temporon meter. Calculate how much work work with materials can be using an online calculator. In order to get the most accurate calculation, fill in all the fields of the form and select the desired options from the proposed menu.

The program requests:

• height of the fence;
• metrage;
• type of stakenik;
• quantities of lag.

The cost of a single-row fence to the cottage from the windshield turnkey is determined in the basic configuration with the materials and work of turnkey. For an elevation of 2.5 meters high, three transverse lags are automatically selected. The number of metal columns is necessary for the construction of the fence the system determines itself at the calculation that the support of the support is necessary every 2.5 meters.

If you want to order a fence from a two-row erupker to give a dual, the price with a turnkey installation will be calculated personally. In an individual, you can also additionally order the calculation of the cost of hedges on brick or concrete pillars, with the foundation device.

The price of the fence from the European turnkey depends on:

• design size: the greater the hedge, the greater it requires materials, the more expensive will be installation;
• support types: Brick, stone and concrete pillars are more expensive than supports made of metal pipes;
• type of stakenik: Cheaper than the entire rails from a thin galvanized professional leaf, the most expensive - with a double-sided polymer coating of a large thickness sheet.

The popularity of erectic fences in Moscow is growing, the fences from the professional flooring among the leaders of sales, they are ordered often. This is due to the competitive advantages of such fences.

The advantages of eurgic fences

Reliability and durability are the main advantages of the hedges from metal plates. The operational resource in comparison with the wooden they have significantly higher. Metallic fence is not lit, it does not have restrictions on time, it can serve as 50 years or more, because it has mechanical strength, resistance to external loads. It is not necessary to abandon it, if necessary, it is easy to repair.

In comparison with the protective structures from the corrugated, the fence from the steel stake is easier, characterized by less sailboat, which for Moscow and the Moscow region is very relevant.

Presentability is another factor affecting the popularization of the hedges from metal plates. They harmoniously fit into urban and country landscapes, advantageously present buildings around which are installed, increase the commercial value of objects.

To ensure reliably protected the territory, it was not subject to vandalism, withstanding operational loads typical for street structures, it should be established in strict compliance with the requirements of construction standards, safety standards. When choosing a contractor, it is necessary to take into account his business qualities, reputation.

It is possible in order to save it yourself to buy materials with a profitable discount and hire the artist who has the lowest rates. The construction market is cheaper than the entire service of private craftsmen, which may well be visiting. Such specialists usually work without a license, do not give written guarantees. Savings when implementing large-scale projects should be reasonable, not carrying risks.

The company "Zabovo" has been working for more than 10 years, has an excellent technical base, professional personnel, provides advanced guarantees for materials and services performed. Here you will provide a qualified advice regarding the choice of the type of fence, taking into account:

• existing exterior;
• architectural solutions;
• required level of protective qualities;
• planned budget.

Using an online calculator on the company's website, you can calculate how much the construction of a fence for giving from Ershtroker in typical execution. For customers, there is a free calculation of several models of fences with those in other additional elements. Preliminary estimates are issued without ordering on the day of circulation.

To order a fence from Ershtroker in Moscow in the company "Zaborovo", leave an application on the website or use the connection convenient for you.