Not so long ago, when repairing apartments, the easiest and fastest way of facing was used - painting. The modern market gives more opportunities for home improvement. But, the question arises, how to remove the old paint from the walls? There are three main ways:

Remove or leave

Solving the issue to remove or leave paint on the wall depends on the type of work. If the laying of tiles, parquet, wallpaper, plastic panels is supposed to be further, then the paint must be removed. The painted surface does not have adhesion with adhesives, plasters and other construction mixtures. From here it follows that all the work on the improvement will go to the pump and soon the new coating will go away from the walls. If the purpose of the repair is to protect the wall with plasterboard, then in this case there is no need to think how to remove paint from the walls.

Paint and way to remove it

The paint and the bases that it is applied is different, on which the stained surface and the type of paint material depends, the method of removing paint from the walls. Before starting work, it is necessary to study in detail several method processing methods. This will help correctly believe the old paint not only quickly, but also safe for health.

Factors affecting the choice of fashion:

• View of the painted base and purpose of repair
• Number of layers applied on the wall
• Paint type
• Inventory available
• The amount you are ready to spend on repairs

Paint type:

• VioMulsion
• Oil
• Acrylic

Of course, not everyone knows exactly what type of paint on the walls of your apartment or at home. In order for the process to move less laboriously, an experiment should be conducted. In small areas, check several ways to cleanse from the old coating. Oil paint from concrete base is especially difficult to remove. Therefore, how to remove the oil paint from the walls we will describe in more detail.

View of the coating:

• Concrete
• Cement
• Plaster
• Brick
• Plasterboard
• Metal
• Wood

How to remove oil paint

Paint, applied to an inextentive concrete coating, is very difficult to belong. Consider three options, and each will choose the one that suits him more on the basis of the budget and opportunities.

Tool:

Depending on the selected method, a different inventory may need. And of course, to remove the paint from the walls of laborious, but it is necessary to rely on the budget that you have.

Chemical method

Chemicals are two types:

• Alkaline
• Organic

The method is simple enough. The required amount of chemical solution is bought. The reagent coat the painted surface with a flat layer with a roller or brush. After a few hours, you can clean the old paint with a scraper or spatula.

Tip! It is desirable to apply a chemical mixture evenly in one direction.

Attention! If the paint is applied in several layers, it is necessary to repeat the procedure several times for better surface cleaning.

Disadvantages:

• Expensive
• High-toxic
• Special disposal
• Causes burns when entering the skin

When choosing such a method for removing paint from the walls, an increased security measures must be observed. The room in which work is carried out must be carried out. During the procedure in the apartment can not be for children and pregnant women. Use personal protective equipment (gloves, glasses, respirator), as well as in clothes covering the whole body.

A few more ways

Water and calcined soda are used to remove paint from a wooden coating. The wooden surface is wetted with water and fall asleep as calcined soda. Cover the mixture with cloth and through a day the paint can be removed by a spatula.

From the old paint will also help get rid of a mixture of potassium carbonate and lime. In tanks with water, potassium carbonate and forgery in proportions 1/3 are mixed. The resulting mixture is applied to the surface and after 12 hours the old paint from the walls is easily moving.

Liquid glass is applied on oil paint. The glass layer enhances and peeling along with the old paint.

Thermal method

Removal of paint with a construction dryer is an easy process, especially from a wooden surface. The hot air jet softens the old paint and a spatula or scraper is removed by a soft layer. This method of removing paint is ideal in places where it is impossible to use vibration or impact, for example a glass surface. But with this there are a number of shortcomings.

Understandable use:

• In places where there is electrical wiring
• In decorative places

Disadvantages:

• Empty smell
• Toxic discharge
• The probability of fire

It is possible to use this method only if there is a respiratory protection tools and in a well-ventilated room.

A warning! If you cut the paint and not remove from the walls on time, it will later be very difficult to tear it.

Spend an experiment in a small area, as many paints are better enclosed with the surface.

In the absence of a hair dryer, you can apply an iron and a foil sheet. Through foil Iron warm the surface.

Mechanical method

If two other methods have negative qualities, such as toxicity and caustic smell, then this mechanical method in this plan is safe. But here also individual means of protection against dust, as it is harmful to human respiratory bodies.

Ax and Water

An old and effective way is a mechanical impact on the old paint with a toporist. A notches are applied over the entire painted surface of the surface, then the wall is sprayed with water, after a few minutes they consider paint with an ax. This method is ideal for a small poorly ventilated room, for example, before facing the walls with tiles. Ceramic tile is better connected with an uneven surface.

Bulgarian with a wide range

Cleaning with the help of a grinder is fast, but a lot of dust is created. A few minutes of work and half an hour of waiting until dust is asced. But recently new equipment with a built-in vacuum cleaner appeared on the market, which allows you to work as clean as possible. This method of removing system paint from the walls is suitable for external work, where it is necessary to clean the large surface.

Drill with nozzard

In the arsenal of builders there are three types of nozzles:

• Peeling
• Corstchet
• Brick nozzle

The colors allows you to clean the paint with pieces without damaging the stucco of the painted surface. Such a nozzle consists of three chains, each of which is 13 units. The chain is destroyed and it has to be changed to a new one.

The method of processing a drill with the use of the tank nozzle is less effective than with the nozzles of the pea and for brickwork. And also more dirty, such a nozzle creates a lot of dust.

Coronated nozzle allows you to remove paint from concrete with the least dust. Brick nozzle is an excellent alternative to a construction festival, but with a huge plus hairdryer will not be able to warm up a concrete coating to such an extent that the paint began to derain independently. But also have its own minuses.

Disadvantages:

• Laborious
• It takes a lot of time

Chisel and hammer

How to clean the walls from paint, if there is no expensive power tool and solvents at hand? There is one cheap, but time-consuming way to skip paint from the walls. This is the reception of the chisel and hammer. The chisel is applied to the painted surface and is closed with a hammer.

Conclusion

It is worth remembering how much the way it is selected is needed to follow several rules:

• When chemical impact on paint, the room should be well ventilated
• Thermal way with open fire is flammed
• Be sure to use individual defense methods.

Attention! Any way to defeat the respiratory tract and eye without the use of protective agents.

All methods are excellent, but it is worth noting that mechanical both manual and electrical are safer. But their implementation is a lot of time and effort, as well as garbage and dust. Chemical and thermal faster and less dirty, but much more dangerous for human health, toxins and caustic smell are distinguished, which is held for a long time. When choosing a way to remove paint from the walls, it is worth considering all the factors that are considered in this article.

For staining of walls, it is used mainly water-based paints. This provides rapid drying of surfaces, no smell when performing work and safety during operation. Another 20-30 years ago, the selection of decorative coatings was much more meager, so enamels based on varnishes and oils were most often used. Those who had to remove the old paint from the wall during the overhaul of the premises, know how to do it difficult. The article discusses the most effective methods of removing the coverage.

Preparation for the removal of coverage

Anyone who believes that the tile can be placed on the paint or, deeply mistaken. Of course, if we are talking about rapid cosmetic repair, which is often not done for yourself, but, for example, before selling the home, this option is suitable. To provide a bearish service to the use of such technology.

Before you figure it out, what method of removing the old paint to choose, it is necessary to study the type of coating. Paint happens:

Reservoir;

Acrylic;

Oil.

It is also necessary to investigate the basis for which the coating was previously applied. Most often staining are subject to:

See also: Block House: Scope, Characteristics, Mounting Features

Plaster.

In addition to determining the type of paint and ground, it is necessary to take into account the following factors:

What arsenal tools is in the economy;

How quickly it is required to prepare a wall to painting;

Reference! The most time-consuming process is the removal of oil paint from a concrete base, which was not previously twisted.

Regardless of the selected way to remove old paint from the walls, you should prepare tools that can be useful for work:

Electrode with abrasive nozzles or metal brushes (can be replaced by a perforator);

Bulgarian with appropriate nozzles;

Chisel, scraper, spatula, construction knife;

Construction hairdryer.

As auxiliary means used: chemical compositions - solvents, water.

With the help of chemical

To work, it will be necessary to purchase special coaling agents made on the basis of organic or alkaline substances. The composition is evenly distributed over the working surface with the capture of a small fragment of the wall. For the interaction of chemical components with paint, you should wait for about 10 minutes, after which a slightly swollen coating is removed using a spatula or scraper. If necessary, the procedure is repeated on the same plot 2-3 times.

Benefits of the method:

Simple technology;

Stepped paint pepper without deformation of the foundation.

Disadvantages:

The acquisition of funds should be provided for the budget (there will be a lot of solvent when working in a large room);

See also: Ceiling decor with wood: features, types, advantages and disadvantages of wooden ceilings

The chemical method is ineffective for coatings applied more than 2 years ago;

Caustic smell of solvents;

For safety goals, work is made in overalls and respirator.

Mechanical method

This method is considered popular thanks to the absence of a budget for the purchase of consumables and efficiency. The truth is worth considering that it is the most time consuming. The essence of the work is to process the walls with an ax (you need to make as much instruments as possible), with the subsequent paint paint with an abrasive brush, which is used as nozzle on a drill or a grinder.

Benefits:

The paint removal process does not require investment;

The resulting jar based on the surface of roughness, which is ideal for subsequent laying of tiles.

Disadvantages:

The success of the work depends on the properly selected angle of inclination of the ax blade;

When performing superfit and stripping indoors, dust rises, so protection equipment (clothing, glasses, respirator) are necessary.

It should be noted that a lot of time is leaving the paint. What, the period of work is shorter than the waiting time of the dust shrinkage. The passage of the punch of the perforator for one minute requires 20 minutes of break. Accelerate the process with moisture will not work, the saved time will go to clean the mud from the floor.

Paint removal with high temperatures

Under the influence of high temperature, the old paint is melting, as a result, the coating swells and starts to bubble. After such a reaction, it remains to remove the raised layer with a spatula or scraper. As a source of hot air, the construction hairdryer is perfect. It is directed to a certain area and expect bubbles.

Creator: GD-JPEG V1.0 (using ijg jpeg v62), Quality \u003d 100

Often we are faced with the situation when morally prepared for starting repairs, we discover a number of obstacles before implementing the idea. For example, after holding the walls of the walls in the room and I already carefully planning and picking up the material that you liked, it is necessary to get rid of the old layer of paint on the surfaces with which work will be carried out.

If you ignore it and take the finish of the walls on top of the old paint, then it is quite likely to all our works will soon go to the pump. In order, such an unenviable fate did not comply with you, we prepared instructions on how to wash off the paint from the walls or remove it in a different way.

Tools and paint removal materials

Cleaning the walls of paint - the process is not easy, and therefore it is necessary to approach it in fulfillment. We need the following tools:

• First of all, it is necessary to take care of your own security, because you prepare personal protective equipment - respirator, mask, rubber gloves;
• The paint is pre-warm - we will need a construction hairdryer, or a soldering lamp;
• Delete crushing pieces of paint needed using a professional tool - spatula, knife or chisel;
• We can use a chemical agent for removing paint from the walls, as well as a brush for applying it;
• There will have to do sebels, and for this it would be nice to have a major acute item - an ax is suitable;
• The perforator and drill needed during any repair, as well as specialized nozzles on them.

Wall paint removal

There are a number of ways to remove oil paint from the walls. Conditionally removing the old paint from the walls can be divided into three main species - with the help of chemical solutions, with an increase in heightened heat and under mechanical influence. In order you could choose the most suitable for you, we will cover the main features of each of them.

Mechanical method

If you decide to get rid of paint from concrete walls with a mechanical way, then you will have to work well with your hands. This method is not toxic and does not require much costs, and to implement it we will need to arma with the set of electric drive tools.

First of all, we take into the hands of the ax and put sneakers along the painted surface, and after begin to methodically wash off the paint with water. As soon as the water suits the paint enough, it is enough minutes for this, we begin to remove it with sharp movements of the ax, inclined parallel to the surface of the wall. In those places where the topor is not easy to turn around, for example, in the area of \u200b\u200bsockets and plinths, we recommend using a spatula or a chisel.

The active removal of oil paint from the walls will inevitably dull our tool, and therefore you always keep the grinding stone or sandpaper at hand and it is for a timely manner. As we have already noted, this method does not require excessive costs, but the process is of a long time and there will be a lot of physical forces.

Also, for mechanical removal of paint from the walls, an electric door with special nozzles in the form of a grinding circle or a nozzle with a chain is perfectly suitable if the paint layers are too high. With the help of such equipment, you can get rid of the paint layer in a matter of hours, and you will not need any special skills.

The drill is also a good help when painting paint from a concrete wall. The concrete surface is best kept in paint, but if you first treat the wall with a solution of soda, and then pass on them with a spatula, then the subsequent operation of the drill will be less laborious.

Chemical method

How to remove the water-mounted paint from the walls? First of all, it is worth contacting chemical solvents, because they are invented. It is enough to apply a solution on the desired surface and calmly engage in your affairs, he must do everything for you. A couple of hours later, the paint will become soft and easily removed under any mechanical exposure.

During the use of this method, it is impossible to forget that chemical solvents are toxic, and therefore it is necessary to take care of the methods of their subsequent disposal, both solution and paint removed. The process of interaction of the chimustra with paint is accompanied by a caustic smell, and therefore you will need to use a respirator and other equipment that protects the respiratory tract from harmful impurities. In addition, if the paint was applied in several layers, the procedure for applying the solution will have to repeat repeatedly, and it is not suiced.

Such a chemical fluid can be prepared on their own, for this you need to be neglected lime and calcium, which must be mixed in the 2: 1 proportion, stir with water and apply to the surface. There is no old paint against such a cocktail.

Thermal method

Removing the old paint from the walls by heating the old finish with a construction hairdryer to an affecting temperature. As soon as you noticed the formation of bubbles under the layer of paint - take a spatula in your hands and consider it. Some craftsmen as a substitute for a hair dryer use iron, but it is unlikely to cope with a thick layer of paint.

Such a method is recommended to be used in those situations when fragile items and a mechanical or chemical method can damage them near the paint removal zone. Unfortunately, the method is not deprived of minuses - we cannot warm up the entire necessary surface, and therefore the process stretches over time.

It is also impossible to use heating in the field of wires and outlets - paint can ignite, and caustic evaporations can not be avoided, because do not forget about the means of individual protection. Be careful if the paint has in its content lead, then you can apply irreparable damage to your body using this method.

Possible difficulties

Removing the old paint from the walls is accompanied by a number of inconvenience arising during this process. To begin with, all tenants will have to leave the room in which the paint removes from the walls. With a mechanical method and painting with an ax or a drill in the air, a suspension is formed, nothing good for health is not allowed. The thermal method is also not deprived of such a minus, and entering the body of a special solution and can entail a chemical burn at all.

Therefore, there is always an alternative, which in many cases wins in any of the above methods - leave paint and disguise with finishing materials, such as PVC or MDM panels. Sometimes you can choose a primer that will fall under a new paintwork, and the old will not be shone to it - in such a situation, it is not necessary to remove the old paint from the walls.

The repair of the Bathroom of the Soviet Sample is almost always associated with titanic labor to remove old paint from the walls.

The former hosts were painted on conscience, often the first layer of paint was imposed directly on concrete, which does not make it easier for the task of refining the room.

Leave everything as it is possible if the new finish will be performed using dry plasters, such as drywall. Under the finishing with the use of any plastering or adhesive solutions, paint will have to be removed very carefully.

Otherwise, the weak grip of the solution with the remains of the old coating will result in the loss of aesthetic view of the room in a matter of months.

With all the achievements of scientific and technological progress, anything new in addition to mechanical, thermal and chemical methods of removing paintwork, humanity has not yet invented.

Depending on the selected method, the removal of paint is accompanied by:

• Noise;
• The formation of dust clouds;
• Excretion of bad smelling and toxic substances.

When choosing a method of surface preparation, the following factors should be taken into account:

• Repair budget;
• Available tool and application skills;
• Type of painted surface and subsequent work;
• The number of layers and paint type.

The most difficult thing to clean the concrete surface from oil paint.

In addition, the quality of the new coating can suffer greatly. Much safer use chemical and mechanical means.

Mechanical surface cleaning

For mechanical removal of paint, manual or electrical instruments are used.

Putty knife

Cleaning the walls with a spatula, a knife or scraper - the most affordable and time consuming method. Paint is removed by scubactural movements. Such cleaning is relatively silent, dust is formed relatively a bitThe paint managed to consider even where others cannot use other devices. Special skills of owning tools are not required.

The main disadvantage is the high time and strength costs.

Ax or Korchoe Mason

The case will go much faster if you use a small very sharp ax. Noise will be more, muscle efforts, too, but productivity is several times higher than when using a spatula.

To remove the paint, over the entire painted surface of the ax make frequent notches. The more often they are located, the easier it is later the paint lagging behind. The impact force at the same time does not have a decisive value.

After that, paint is considered with neat movements from top to bottom.

This method is less noisy and dusty compared to the use of electrical instruments, does not require additional costs for the purchase of reagents and electricity. When processing the surface of the ax, additional irregularities are formed on it, which improve the adhesion of plaster solutions with the base. The most effective ax at pre-plastered surfaces.

Remove the paint, applied directly to the concrete or on top of the thin layer of the primer with an ax is almost impossible. The use of the ax involves the presence of appropriate skills and requires significant physical effort. Practices argue that Korchie Bricklayer is not inferior to the ax, but it is much more convenient to work with this tool.

How to choose a good waterproof paint for a bathroom without smell?

Learn from this article how to install the door to the bathroom with your own hands.

Power tools

Among the most effective techniques for cleaning the walls of the bathroom from the old paint - removal of the coating with the help of power tools. The coated is best coped with a grinder with a diamond cutter, instead of the cutter you can use a turbine or a cutting circle along concrete. You can also use a grinder or perforator.

Cleaning is performed by translational movements along the wall.

With the help of electrical tools, you can quickly remove the paint directly onto the concrete, but if there is a layer of putty with a thickness of 2-3 mm, it is better to use the ax or spatula. Work with electrical instruments does not imply significant physical effort, but requires certain skills.

Such a cleaning is accompanied by a strong noise. During operation, a huge amount of dust is formed, it is necessary to work in the respirator, protective glasses and gloves. Clear all space usually fails - the tool does not pass into the corners and other places with a complex geometry.

Chemicals

To clean the surface of the walls in the bathroom, they apply a solvent or other chemical agent using a roller or brush and leave for a while.

After that, the softened paint is considered a spatula. In addition to organic solvents, such as acetone or White spirit, you can use liquid glass, soda-soda and overeximal.

Organic solvents

The use of organic solvents has several drawbacks:

• If the wall is painted in several layers, you will have to process each layer.
• Due to the toxicity of industrial reagents during operation, it is necessary to use personal protective equipment.
• The cleaned wall must be rinsed several times to remove the solvent residues.

When working with reactivities, the room should be well ventilated. Children, pregnant women and nursing mothers at this time should not be in the house. The residues of the solvent are disposed of in accordance with the instructions.

The paint etching method is quite dangerous and can greatly affect the quality of the new finish.

How to paint pipes in the bathroom yourself? Detailed instructions.

Learn from this article, what doors are suitable for the bathroom.

Inorganic reagents

For softening, paint can be used with a mixture of soda soda and oversized lime. For the preparation of the mixture, 1.4 kg of lime and 400 grams of soda will need. The components are thoroughly mixed, diluted with water to the thickness of sour cream and applied to the wall. After 12 hours, the paint is easily removed from the surface.

On top of the old paint coating, you can apply a layer of liquid glass. After drying, the paint is removed along with a silicate film.

Even with the use of modern chemicals and tools, the removal of paint from the walls of the bathroom - the procedure is quite time-consuming, with a multitude of nuances. Whatever ways you have chosen, you still have to be patient and attach some efforts.

Subscribe to e-mail updates:

Tell your friends!

They also suffered with a similar problem 10 years ago. Bought an apartment in a terrible state - the repair was not carried out in it since the construction of the house. In the bathroom, the walls were painted in a terrible dark blue color. They removed the paint with the spatula, I do not even remember how much time it took this process, I remember that very long and tedious. Also the idea of \u200b\u200bburning old paint, but did not risk.

Good afternoon! When they did repairs in the bathroom, we had a problem with the problem of removing the layer of old paint. After examining many information, as a result, they first filmed the paint with the help of a small hatcher, but it was slowly taken from familiar construction hairdryer and the soldier was moving faster and the wall remained smooth.

Recently made repairs in the bathroom. Cleared manually walls with a spatula, I didn't even know about other cleaning methods. Oh, and I got it! Article I will take note.

All ways how to beat old and fresh paint from the walls: methods, how to remove fast all types of paints

The bathroom, as a rule, is trimmed with tiles, which is easy to dismantle enough if necessary. However, sometimes walls are covered with paint, and in this case it is necessary to make some efforts to remove it.

With ease, remove the paint from the walls in the bathroom

Remove the old paint from the walls is a troublesome and not a simple matter with which to actually cope with your own. The article will consider issues related to the removal of old paint.

When you need to remove the old layer of paint from the walls in the bathroom

The need to repair in the bathroom may occur for various reasons. Often it concerns the complete or partial removal of wall covering, including the cleaning of painted surfaces. In the future, the purified and preferably aligned wall can be applied fresh layer of paint or lining a cafeter.

Clear the surface of the walls in the bathroom from paint: what tools will be required

Based on the budget, preferences and human capabilities, the list of possible tools may be as follows:

• putty knife;
• ax;
• perforator;
• solvents;
• hammer and chisel;
• grinders.

Of course, this is not a complete list, and then the article will consider some of the main options.

With the help of hammer and chisel

One of the obvious and coarse ways, which, however, demonstrates quite high efficiency. Taking the chisel and the hammer, the fragment of the fragment can be started to beat the layer.

Advantages and disadvantages:

• the ability to save on chemicals;
• large time costs;
• the need for monotonous physical work.

While this option is suitable in those situations where the wall is planned to be placed in the future.

Using paint cleaner

No less monotonous, but less tedious is paint removal using a special caustic substance that etchs it. Saving a brush into paint shredder, you should walk along the entire surface to be cleaned. Waving fifteen minutes will only be ridiculously sipped with a spatula.

When working using paint cleaner, the following items should be observed:

• It is recommended to protect your hands with gloves.
• The room must be ventilated.
• Paint, which is not removed from the first time, should be missed and rustled again.

With the help of a cords

Float: \u003d "" LEFT \u003d "" MARGIN: \u003d ""\u003e Removal of old paint is not the most difficult task with which you can encounter during the repair of the apartment, and in particular the bathroom. However, this process also has its own characteristics.

Clear the water-based base

The waterproof paint is usually used in rooms with high levels of humidity, which is a bathroom. However, despite the fact that water is one of the main components, it will not work anything to achieve anything. It is recommended to abundantly wasting the walls with a large number of warm water until the paint soften. For a thorough and uniform distribution of moisture, it is necessary to use a roller and carry out these manipulations quickly, since the moisture dries enough.

Quickly shake emulsion from concrete walls

In the case of emulsion paints, the method of active moistening or electrical instruments can be used to accelerate their removal process. Chemicals in the form of various cleaners and solvents can also come to the rescue.

How to consider oil paints

Oil compositions, like most others, are easily removed from the walls with the thermal method of the associated construction dryer. Of the simpler options, a combination of warm water and a spatula is suitable.

How to clean from old textured paint

The old textured mixture is effectively cleaned from the walls when using the same methods as for emulsion.

Is it possible to construct decorative painted surfaces with applications

In such a case, the question is solved as well as with any similar material. The choice of tools is performed on the basis of the specifics of the particular room and the preferences of the wizard.

What to do after cleaning the main paint layer

In the case when the main layer or several layers were removed, it will take a number of actions that are determined depending on how new coating is planned. As a rule, after removing the main layer, the wall surface is degreased, and then processed by primer. The use of most tools implies that the wall to a certain extent will receive small damage, which also necessitates the emergence of its subsequent alignment.

What errors most often allow

The main time in the question under consideration is that the cleaning of the walls should be made without fanaticism. It is worth only slightly to rearrange and instead of a clear wall, a broken concrete surface will be obtained, which will have to strengthen, align and prepare.

It is also worth remembering that cleaning should be complete until the primary concrete surface is exposed.

The article discusses the question of which cases may need to withdraw the old paint in the bathroom, how this operation is performed, and which tools are used.

Useful video

How to remove paint from the wall in the bathroom

Andrew. K. Stavropol.
I thought to put a tile in the bathroom on the walls. I heard that the tile will not hold on to the old paint. Tell me how to remove paint from the wall?

Many face paint removal problem, conceiving repairs in the bathroom. Some a couple of decades ago, this wall decoration was fashionable. Before laying the tile, paint must be removed, otherwise the new cladding will very quickly disappear by entire fragments. This occupation is not from the lungs and the rate of removal will directly depend on the type of paint and the surface to which it is applied. Explore the article and use tips and auxiliary video.

Mechanical removal methods

Consider simple mechanical methods that do not require special skills.

1. The ax and water will suit the plastered wall. Tapping with a sharp ax, like a hammer on the wall, notches are made. The wall is wetted, and then the blade of the ax at an angle to the wall is invalid by a layer of paint. The method is long and time consuming, but notches will continue to provide a good tile grip with a wall. In addition, the risk of getting injuries is minimal, and the dust is almost no, which is important for the room with a small area.

The cruciform produces a lot of shallow dust, and the chain knocks off the paint with pieces. When using a chain-sized nozzle, the nozzle need to press the nut, and the rotation of the drill to install on the left side. The nozzle is used as long as it remains at least three levels. When the link is fought off on one side of the chain, then on the other hand, it is also necessary to squeeze the link for equilibrium.

Paint with chemicals

Paint removal tools greatly simplify the process, but are not quite safe. Working in a small bathroom, do not forget about rubber gloves and the protection of the respiratory organs. In order not to poison poisonous pairs, do not close the doors to the room.

• Various paint converters and solvents Contain caustic stuffing agents. Suitable for removing any paint. The essence of the procedure is simple. A roller or brush is applied on the wall. Movement is better to do one way. The liquid has the appearance of thick jelly and when it can cause a burn when the skin can cause. And the smell of such a drug is not pleasant. After applying, we are waiting for a half hour, the paint will start wrinkle and removed. The dissolution time of paint can be more. Remove it with a spatula. If the coating is very old and durable, and also applied to several layers, it may be necessary to re-apply drugs. And do not forget to close the lid with the solvent after work. We remove the remnants of the means with a rigid brush with progressive movements, and then wash the water several times with the addition of calcium carbonate. The latter washed with clean water.

• If the adhesion of the paint to the base is weak, then you can try solution from the oversized lime 1.5 kg and 500 g of calcined salts. Apply this mixture on the wall with a brush, and after 12 hours to remove the spatula.
• Liquid glass When dried, it creates a solid film on the paint and flaps well with it. The procedure is similar to the previous method.

Temperature method

It will take a construction hairdryer or soldering lamp. First, try to heat and scrape a small plot with a spatula, the fact is that some paints with heating are even stronger with a concrete surface. Clean the peeling paint immediately, and then it is what is called, and you will not take your teeth. Thermal removal is very toxic, besides there is a risk of fire. Observe all safety precautions.

Now you know everything about how to remove paint from the wall. It's easier and faster to make it with a grinder, and the perforator prepare the wall to the coating with tiles. Use the way you best approach.

Wall paint removal method: video

Remove paint from walls in the bathroom

Repair of premises, and especially bathrooms decorated in Soviet standards, often becomes quite problematic. To qualitatively put a new tile, it is necessary to remove the old coating - paint. Based on the features of repair in Soviet times, the question arises: "How to remove paint from the walls in the bathroom"? Clean the surface in such situations is very difficult, since the coloring substance was applied directly to the concrete coating.

Currently, the masters are big inventors. They are in the fight against paint use various tools: Bulgarian, burner Gas, construction hairdryer, perforator, spatula, scrapers, knives, etc.

The process of cleaning the surface of the wall is impossible without noise, dust, unpleasant odor. Also, it will also require a lot of effort and time spending. To select the optimal paint removal option, it is necessary to evaluate both positive and negative sides of each approach.

Quiet methods of cleaning

Before starting repair work in the bathroom, you need to prepare the room. First of all, it should be cleaned with paint walls. This substance is associated with acetone and solvent. This approach is though silent, but still bring great discomfort not only to the owners of the apartment, but also the neighbors. This is all because it is accompanied by an unpleasant poisonous smell. Despite this, solvents are often powerless before the solar coating. You can cope with it using a scraper, hard brush, brushes. In this case, it will be necessary to further comprehend the surface with a solvent, protecting the hands and face with gloves and mask.

Another way to clean the surface of the paint is burning. The main "tool" in the struggle is fire. Despite its silentness, it is characterized by such disadvantages, namely dangerous discharge, a terrible smell, special skills and skills to work with a source of fire.

The burning method is effective, but ineffective, since as a result, the surface of unsatisfactory quality is obtained. It will directly leave his mark on further finishing work. The method of burning paint is the most unsafe approach.

"Environmental clean" ways

A mechanical method is used to clean the walls of paint. It consists in using a spatula or other submitted means for moving the old coating. This approach is the most efficient because it is possible to clean even hard to reach places. The advantages of this method include: the minimum amount of dust, noise, the ability to process all sections of the surface, the absence of additional costs for chemicals, electricity, and also does not require attracting and buying various tools. The mechanical approach is to remove the paint from the walls in the bathroom, is quite simple and understandable because it does not require special knowledge and skills.

Despite the number of positive parties, the following disadvantages are distinguished: it takes quite a long time, characterized by long muscular labor, monotony.

The "Dedovsky method" can be called a more interesting and busy approach to cleaning the surface. The main tool is the ax. This method is characterized by great efficiency, significant physical costs, high speed of work.

The process of cleaning walls from paint using the ax is as follows: notches are applied to the surface due to the acute edge of the working tool. Thanks to this procedure, the paint is artificially swept. To remove such neoplasms, movements are performed from top to bottom, but the ax should be sharp. This approach is as efficient as possible if the paint has been applied to the plaster.

The "ax" method from the positive side is characterized as follows:

1. High level of efficiency.
2. Little volume of dust and noise.
3. No need for electricity costs and the acquisition of chemical reagents.
4. Perfect for the preparation of the surface to subsequent processing.

Has data approach and disadvantages:

1. Required to perform great physical efforts.
2. The need for skills and skills of working with this tool.
3. It is difficult to remove the paint from the concrete coating, as well as from the thin layer of primer.

Bulgarian and perforator have a high surface cleaning rate. Thanks to these tools, remove paint from the walls will be possible in a matter of times. Cleaners are carried out by progressive movements in the longitudinal direction. A distinctive feature of this approach is dirt.

The method using the grinder and perforator is characterized by such parties:

1. For cleaning the surface of the walls requires little time.
2. Small physical exertion, subject to the availability of experience with the tool.
3. As a result of paint cleaning, a large amount of dust and garbage is formed.
4. High noise.
5. Lack of opportunity to work in hard-to-reach places.
6. The need for the use of protective equipment: gloves, respirator, hair cap.
7. In the process of applying this method, it is necessary to follow safety.
8. Performs the most effective method when comparing with others. This is justified by the opportunity to clean the paint even from concrete.

Before removing paint from walls in the bathroom, you need to familiarize yourself with various types of paint. But despite this, the complexity of treating the surface of oil types is significantly different from the purification of coloring emulsions that are created on a water basis.

Features of the removal of water ip

The waterproof paint is a solution that is based on water. Despite this, remove it after drying with the help of liquid will not succeed. For rooms such as bathroom and kitchen, it is customary to use a special type paint, which is characterized by a high level of resistance to aquatic environment.

Thanks to the ingenuity and resourcefulness of the masters, there are the following features of removal and such a type of paint:

1. If it is good to moisten the surface with warm water, after some time the paint absorbs moisture and will swell a little. After that, the spatula will come to the rescue.
2. For the convenience of soaking surfaces, it is recommended to use a roller of large sizes. It will be the most useful for the ceilings.
3. In parallel with drying, the efficiency of surface cleaning deteriorates. So that everything goes well, it is necessary to constantly maintain the optimal level of humidity.
4. In the process of removing paint, the floor covering is very dirty. To avoid problems and additional work, it is recommended to put the floor. As a coating, you can take either newspapers or a polyethylene film.

When the surface wetting is an inefficient method, then a spatula comes to shift. An excellent alternative to this tool is the grinding. She perfectly cope with the task, but at the same time a large amount of dust is formed. At the same time, the approach should not forget about protection measures. In order not to harm yourself, it is recommended to use gloves, respirator, construction glasses, etc.

If the walls are covered with a thick layer of waterproof paint, the construction hairdryer will perform as a working tool or a soldering lamp.

Among the various types of wall coatings and types of waterfront paint, there is a universal approach to surface cleaning. It consists in the following:

1. First, it is necessary to prepare a special solution, which is called Pleaster. It consists of a PVA glue, which is distinguished by the level of consistency or this is a robbery of the usual type.
2. Next, it comes a turn of the application of this solution to the surface and simultaneously gluing newspapers on it.
3. To remove the paint, it is required to wait for the complete drying of the glue, and then throw the newspapers. In the process of their removal, the coloring agent from the walls should disappear.

In addition to the above methods for removing paint from surfaces, other approaches to solving such a task are effectively used and widely used.

1. Shredder. It is a means that is manufactured according to the instructions placed on the package. The obtained student mass is designed to cover the surface that works as a solvent. Such a process is sufficiently long.
2. Iodine solution. This substance is used as a softener. It is prepared by dilution 200 ml iodine in one bucket of fluid.
3. Finished wasches. According to the wishes of customers, construction stores are implemented by ready-made solutions. They are prepared according to the recommendations that are listed in the instructions. The finished wasches are working after applying them to the surface, then there comes a turn of the so-called dissolution of the paint and the subsequent wash it is water.
4. Soap mortar. It is a thick foam that works as a softener. After applying a substance to the surface, the paint is influenced and the ability to remove it with a cloth. The soap solution consists of the following ingredients: Salicylic acid is used to combat acrylic additives or vodka; If there are latex impurities, dichloroethane or chloroform occurs.

Thus, when the question arises, "how to clean the paint from the walls in the bathroom", then first you need to get acquainted with different ways to remove paint from surfaces. Each method is acceptable for one or another case. Clean the walls can be both own and attract masters.

If it came to update the interior of your apartment, your home, as well as if there is a desire to give a new life to your favorite subjects, then you need to think about how to do with those things that were originally painted by different types of paint.

Naturally, the application of a fresh layer of paint material on an old, may not bring the desired result and once beloved trifle, the old grandmother's chest or even the entrance door looks inactively and completely unsightly.

Do I need to take paint?

Before you start conducting the time-consuming and not a quick process for removing the previous coating, it is necessary to decide whether to remove the old paint?

Well, if you are going to the surface where the old paint is located to apply a ceramic tile, launching, sticking the wallpaper or the old paint cracked, the surface is uneven, with flippers, hill, then certainly - this coating should be removed.

And if you are sure that only one or two layers of paint are applied, the surface is flat, not cracked, the color more or less corresponds to the next coating and the texture of the oil, then with a skillful processing, you can apply a new layer.

To do this, the previous layer is seized with a skin, thus removing the tubercles and minor irregularities, then treat alkaline solution (or purchased in a construction store or soapy cooking), produce primer (synthetic or alkyd soil), dry and see the surface ready to paint.

Otherwise, when unknown multi-layer painting material, deformed on time and environmental conditions, and you plan to change the texture and appearance over the applied layer, then the freshness and attractiveness restored thing will lose fast enough.

So, let's consistently understand how and how can I remove the layers of old paint? To do this, first of all, it is necessary to see which surface it is applied: concrete, brick, wood, metal; Or on building mixes - plasterboard, plaster. Secondly, try to understand what kind of paint is used.

Be sure to try scratching a small area with a spatula for clarity, how many layers are applied. After the study, you can deal with the choice of the surface cleaning method.

In fact, cleaning methods are not so much therefore, if you come in detail to each method, then without unnecessary efforts, the paint will be considered, and the surface will be properly prepared for the update.

The main, frequently used methods used by professional builders:

• By means of mechanical impact.
• Chemical solutions.
• Thermal way.

We will analyze each of the methods in detail, considering what surface it is necessary to clean. Thus, the reader will be able to easily determine how the old paint is quickly removed, choose the most convenient and not spent method for itself.

Through mechanical impact

This method includes two methods:

• mechanical - with the help of its hands and non-good fixtures (ax, spatula, hammer, chisel, sandpaper, etc.)
• mechanized - with the help of power tools (electric drill, sandblasting, bulgaria, perforator, etc.)

The mechanical method is not costly, but in the case of a large surface for processing, the multi-layered material of the material being removed and the reduction of its application is characterized by very severe use of physical strength and the duration of the procedure to remove paint.

But, if you have a strong physical strength and not be limited temporary obligations, it is quite possible to use this environmentally friendly way. For example, use the ax.

This method is well suited if the room is small, not ventilated (kitchen, bathroom), before facing a tile or plaster.

For this, the walls are made on the surface of the wall, at the right angle, then this part is poured with water and after impregnation paint is considered sharp actions of the ax or hammer with a chisel. This is a long and heavy process, and if the paint is painted concrete - this method is not effective!

Therefore, it is much easier to use the mechanized method, that is, with the help of the power tool.

The advantages of this method is not toxicity, as well as the trouble-free removal of old paint, regardless of the age of application, textures and quantities of the layer.

Cons - incredible noise, severe dusting, a huge amount of garbage and a large amount of time for processing. One of the most important points is the presence of the necessary tool:

• drill (including nozzles) - an ideal tool for cleaning with concrete, it will take paint with small pieces with rude recesses;
• a more smooth surface with the necessary depth leaves behind the grinding machine (it is called the grinder), but it is extremely difficult for it, because it is soon, the zero visibility comes from the considered material;
• a deeper cleaning is performed by a perforator with a nozzle (type of blade), this method is very noisy, but due to efficiency is often used;
• another productive method is sandblasting, it lies in the fact that under pressure on the cleaned area, air with sand is supplied, thanks to this, the falling sands clean the surface not only from paint, but also from any other contaminants, for example, rust, if it is metal .

That is, this method can be used, but it is necessary to understand that it is long, physically hard and requires a certain skill.

Just do not forget to use the respirator from dust and try to carefully use the power tools, to avoid mechanical damage to the skin.

Chemical solutions

This method is more perfect. With the right use of this method, there will no longer be questions than the old paint is removed. It is aimed at ensuring that any type of paint soften and is easily removed by building spatulas, brushes, scrapers.

In addition, chemical reagents can be prepared or buy in specialized construction stores. The range of data data is quite wide (alkaline or organic type), it is only necessary to take into account the texture and age of paint that you want to delete.

The advantages of this method are a minor use of physical strength, simplicity of use, very rapid response and for any surfaces and species of paints.

The minuses, perhaps, too much, but if you carefully use the instructions for the use of the reagent, correctly apply funds protecting from certain impacts, work in a well-ventilated room, then the result will pleasantly surprise you!

So, if you have acquired a chemical reagent, carefully examine the instructions for use, wear gloves, respirator, safety glasses, a suit covering open areas of the body, allow the room to be constantly ventilated, or perform work on the street.

Now evenly, with the help of a brush (suitable and roller), apply the solution and go to the desired amount of time. After softening the removed layer, remove the surface with spatulas, brushes or scrapers. If the paint partially remained, repeat the manipulation again.

In addition to toxicity, this method is quite cost. To reduce the process, you can use self-cooked mixtures.

For example, if it allows the surface (floor) to moisten it with simple water and generously flooded with soda, top with wet rags, to maintain the humidity of the treated surface during the day, and then, swelling paint will be easily viewed under the action of a spatula.

Very often, the inventive people use the three parts of the oversized lime and one part of the soda to the denotomy cultivated in water. This mixture is enough to apply for twelve hours and then with the same way, spatula, remove the soften paint.

Some more try to use a solution of liquid glass. It is bought in finished form, applied to the treated surface, give to completely dry, and, thanks to the properties of this substance, in the end there is a separation of the solidified liquid glass together with the surface to which it was applied.

Thermal method

Very often used for those surfaces and elements, where, there is a glass or other fragile material - glazed windows and doors. To perform, you must have a construction hairdryer. And then everything is easier nowhere - the processed surface is heated with one hand to a certain temperature, and the other, the preventing paint is almost immediately considered.

This is very important, because if you give the paint to cool again, with each subsequent heating, it will be more difficult to delete it and more difficult!

If there is no hair dryer, you can use the simplified method - with the help of foil and iron: the foil is put on the surface, heated with the iron and also, not allowing cooling, removed from the area being processed.

Everything is very simple, but the minuses, as always, are:

• the processing area is very limited - it is quite small;
• if the surface is located near the underlying sockets, wires and other melting elements;
• when overheated, resin can be isolated that it will not give to apply a new layer of paint;
• oil paint after heating allocates toxic evaporation, and the paint with lead content should not be warm out.

So, if this method is suitable for you, then definitely perform it in the respirator, try to avoid burns and ventilate the room well.

How to remove paint from a tree?

Given all these ways, will the question of removing the old paint from the wooden surface?

Moody floor, plinth, parquet, frame, and more, as well as small parts for furniture and elements of the chests, boxes, caskets, etc. can relate to painted products.

Carefully examining the methods given above, you can choose any, given that the tree surface is sufficiently soft and rude objects - a drill, a perforator, the integrity of the product surface is disturbed.

In the case when the paint has enjoyed and departs from a wooden surface, you can safely use the way that includes the use of a spatula and sandpaper - mechanical.

The meaning of such work is to scrape the paintwork. If the surface allows you to use the grinding, using nozzles with non-rude abrasive surfaces.

If the paint is tightly lying on the surface, you can use the chemical method, only select the reagent is necessary for a particularly defined breed of the treated tree. Before applying the substance, clean the surface from dirt and dust with a wet rag, then, in accordance with the instructions, use the means, the remnants carefully consider the spatula.

The thermal method is to apply with great care, because when heated, a tree structure and surface occurs, undergoing too high temperatures.

But this method is effective enough for wooden surfaces, the paint is quickly warmed up, swell, bursts, after which it is enough to simply remove it.

How to remove paint from metal?

In addition, the sharp topic, the removal of old paint from metal elements, surfaces, parts, on the nuances when using different methods and their effectiveness. Naturally, use the previously represented cleaning methods, but in this case, it is necessary to take into account the thickness of the metal and its brand.

Any mechanical method with the use of power tools is considered very effective. It should be borne in mind that if the paint is considered with a fine metal surface, then a neat, painstaking manual method of cleaning, but, perhaps, the most effective is considered sandblasting. Sand knocks down paint particles even with the most hard-to-reach places, without any damage.

For a chemical method, it is necessary to select a reagent for a certain metal surface and, further, in accordance with the instruction, to cleanse the paint layers.

Very easy to use aerosols - they are presented in the large assortment in construction stores.

The thermal method must be used very carefully, since it cannot be used on cast-iron, brass, aluminum products, as well as decorative wrought elements. So before using this method, consult with a specialist.

Now, having such a luggage of knowledge, choose the cleaning method as you suits you, but in no case do not forget about the use of personal protective equipment. And believe me, using all these tips, you will get a positive result of your painstaking work!

Photo instruction how to remove old paint