A currant bush has an empty shape. The lower branches are lowered to the ground. As a result, the berries are on wet soil, which leads to their winding. To get a rich harvest, experienced gardeners use streams for bushes. There are several common ways how to disperse the currants with their own hands.

The use of such specialized backups in the country has several advantages:

• tidy, decorative form of plants;
• increase in yield;
• improving the quality of berries (preservation of dirt and mold);
• simplifying the collection of fruits;
• lightweight shrub care (it is easier to pruning old escapes, a musting and soil looser);
• additional protection against animals (birds and rodents);
• strengthening from rain and strong busting winds.

The backups are sold in garden shops. However, you can freeze the currants with your own hands.

Disgust

Trucks from pegs and twine

The easiest option of the fence for currant bushes is made of pegs and twine. If you fulfill the design in good faith, then it will have a few seasons. For this fence, you will need:

• 5 stakes of such a length so that they rise above the soil of about 0.5 m (for the backup of a powerful, stretched bush use a greater number of stakes);
• twine (instead you can use wire or beep).

Support from peg

Clauses are installed around the currants at such a distance so as not to damage the roots. Then the twine is fixed on one of the pegs. Selecting the branches on the desired height, fasten it on the next support. Thus, enveloped the entire bush, raising shoots and tieting the twine to the stakes. It turns out an improvised fence.

Fence from Rogatin and simple branches

The fencing for currant from Rogatin and simple branches is one of the most budgetary structures. Rhotina can be made from unnecessary branches of the fruit tree in its plot or find in the forest. If there was no suitable material, it can be made independently from the boards.

The reverse end of the horns must be sharpened to be easier to stick it into the ground. If the fence is poorly kept in the ground, it can be fixed with additional pegs. It is desirable that the angle of branching of Horthina was wide enough. Then the branch that will be attached from above will be able to lie tightly in its foundation.

Four horns are installed around the bush at the desired height. Top on the fork are superimposed dry, durable branches. Then they should be tested with rope or wire.

Additional Information. In the fall, such a support is easy to disassemble until the next season. In order for the product to be used for a long time, it must be dried and disinfected. The lack of this fence is the low resistance to the strong gusts of the wind. Requires additional fixation of Rogatin pegs.

Stripper on iron-based

The fencing from the metal is distinguished by strength and has a long service life. It is necessary to create metal pipes, wooden slats or bars.

Pipe supports are installed around the bush. In their holes are fixed small rods of wood. You can use unnecessary sticks. Flat boards, rails are placed on top of them, which are then fixed with self-draws.

Instead of bars, rails and boards, you can steal with a metal wire. For this measure the gap between iron supports. To the wire of such a length, another 20 cm is added. The ends of the resulting segment are raised by 10 cm on each side and insert into the holes of the pipes. Fencing with the use of wire should be wrapped with soft rubber so as not to injure the branches.

Also use iron rings fastened by a bolt. These hoops are fixed on the supports with hooks. Rings wear in spring on the bushes on top before the appearance of leaves.

To give a decorative look, a carp can be painted. It is recommended to use paint to protect the metal from rust.

Plastic pipe rods

Fencing for currant from plastic looks decorative. For strength, they are comparable to metal structures. For their creation, PVC pipes are required 4 meters long and 4 angle for connecting pipes.

The assembly of currant fence begins with cutting pipes to 8 equal parts. If the bush is a sharp, then the pipes are longer, so that the design is higher. You can cut with a metal or pipe cutter. There are 4 plastic supports around the bush. They are connected to each other with the help of other plastic segments and "triangles", fastening with screws or irons for soldering propylene pipes.

Costridge

Gardeners who are interested in how to focus the currant bush can use fiberglass composite reinforcements with a diameter of 4 mm or a multi-proper single-core wire in a single isolation with a length of about 5 m. They are pulled through holes in supports.

A coarse holder of plastic pipes - light design. For the best equilibrium, it should be deeply plugged into the ground.

Metal Pipe Costforce

The backup from the metalplastic is one of the most durable and decorative.

1 way

To make the fence of currant with their own hands, the following materials are needed:

• metalplastic pipe;
• nails or self-tapping screws;
• segment of the rubber hose;
• rusties;
• hand saw;
• a hammer;
• screwdriver.

First, the supports are made from the pipe, cutting off 3 equal parts from it about 80 cm. For greater stability of the fence, you can build a larger number of stakes.

Then, from the remaining pipe make two identical hoops. To connect pipes, the hose segments are used with a length of 10-20 cm. The diameter of the hose must be carefully selected so that the metalplastic does not hang out and lightened tightly.

Metal plastic trumpet

In the openings, supports are scored. With the help of nails or self-tapping screws, the upper hoop is attached to these wooden pegs. The bottom circle is fixed to the supports through the pipes or simply put on the bottom, using the wire for fastening the wire. After installing a coat holder, the lower hoop should be located at an altitude of 20-30 cm from the surface of the soil.

So that the design does not catch up and harmonized with a bush, it is recommended to use green materials.

2 way

Before independently make such a fencing for currant, it is necessary to prepare the following materials:

• metalplastic pipe;
• polypropylene tube;
• "Tees";
• apparatus for welding plastic pipes (soldering iron);
• cut of the hose.

Metal plastic is built hoop. 3-5 supports are manufactured from polypropylene. Then the tees are soldered to the supports. Stands with tees are put on the hoop and are evenly distributed. Ends wrap are fixed by the segment of the hose. Racks can be installed on metal pegs robbed into the ground. Then the design will be most stable.

Fencing from a tree

It is possible to protect the smorodine bush in the country using wooden plates. A coarse holder made of natural materials will serve not only support for currant, but will also be well harmonized with a local landscape.

For the manufacture of this fence will be required:

• 4 Kolybie 70 cm long;
• narrow slats for a garden fence (they can be cut from a bar) 100 cm in length;
• a hammer;
• self-tapping screw;
• sculpture.

Pegs clogged around the bush. They can be treated in advance to the means of moisture and rotting.

Fencing from a tree

Important! Pegs should be hammered perpendicular, otherwise the design will lose stability.

Check that the supports are at one height. Then, using self-tapping screws, fasten the splies of the plank. Wooden fence can be painted in a green or some other bright color. Some daches prefer to cover with a yacht varnish, which not only protects against moisture, but also gives decorative product.

Each dacket chooses what the fence wants to make for currant bushes with their own hands. At the same time takes into account the practicality, durability, the presence of girlfriend and ease of manufacture.

Cheapest options from those considered fences: from pegs and twine, from Rogatin and branches. These carp holders are not so reliable in bad weather conditions, but they will not be afraid to collect them. In addition, they easily disassemble. So they can be used for the next season.

Fencing from wooden plates, using self-tapping screws, is already more solid. The view of him is presentable than the previous options. This indiscriminate structure. The disadvantage is that if it is not removed for the winter, then with a large number of snow, it can break. And if you try to take off in the fall, you can break the grown branches.

The fencing for currant on iron-based is durable and founded. However, it is subject to corrosion. And the wire, if it is not wrapped with soft rubber, can injure shoots.

Cost-containers made of plastic pipes are neat and reliable. It is only possible to build such structures from thick materials, otherwise in winter under the layer of snow, they may break, and under the influence of low temperatures will become fragile.

Hebee from metal-plastic pipes are considered the most durable, decorative and expensive. However, the gardener that allowed such a luxury, such a fence for currant will delight for many years and justify the funds invested in her.

Specialized backups are important not only for currant, but also for growing decorative and fruit-berry shrubs. Such stands are suitable for viburnum, gooseberry, raspberries, blackberries. Ornamental plants need them: roses, hydrangeas, the canbushnik.

The process of growing currant on its summer cottage is a rather time consuming occupation. It would seem that nothing complicated in each of the stages of care for this plant is not. Nevertheless, if you do not provide everything competently, and some requirements will go through the party, rely on a generous harvest you are unlikely to have. Special attention should be paid to the formation of berry plant bushes. Most domestic farmers at the present stage use special backups for currant. They are of different kinds, so it should be sought in more detail in which one will become the best option for you.

What is the support of the bushes

Currant on a spleker is a shrub, the direction of growth of shoots whose sometimes needs to be corrected. For example, the plant develops quite normally, but during the formation and ripening of berries, the branches begin to be fed up under their severity. In this case, it is necessary to take care of the currant bushes and to build a special support for them. And far from the currant needs a similar "maintenance" of form. This kind of frames are used for other shrubs: raspberries, viburnum, blackberry, gooseberry. Sometimes they are used to create neat shape bushy colors (roses or peonies).

If you can consider the key advantages in more detail, the compactness of plants can be considered.

The presence of the backup will allow you to significantly save space in the garden plot. In addition, a rather important advantage is also the correct formation of the crown of plants. Therefore, a coarse holder for currant is a necessary device that will certainly appreciate each gardener.

Benefits of the backup of currants

Why should it be used in the gardening coasters under the bushes? With their help you will be able to make shrubs right. As a rule, farmers use similar devices, as it gives several advantages at once:

• branches of shrubs grow up and not "fly away" on Earth. In this case, the plant will continue to develop fully, but will not grow randomly. You get a decorative type of shrub, and in the future you will be much easier to collect a harvest from him. In addition, in the autumn period, you cut the soil around the bush without unnecessary problems;
• berries ripening currant on branches will not be lowered down the book. That is, you will eventually collect clean fruits, and it will not be installed, which often happens when taping berries to wet earth;
• the process of harvesting is significantly simplified;
• much less harm to shrubs will cause rain rains or strong winds.

The advantages of currant feeding will certainly affect the solution of an experienced farmer. The main thing is that the efforts you do have not remained in vain, so it is very important to purchase a backup or to build it at home. We are talking about the indicators of the yield and the health of currant shrubs, so you have to worry about what.

5 ways to manufacture with your own hands

Backups for currant make it yourself not too hard. Of course, such devices can be freely purchased in specialized stores. But why spend extrany funds, if no less productive framework you do without any problems at home? The main thing is to understand the main varieties of these items, as well as determine which of the support will become the best option specifically for your currant bushes.

Quite simple in the implementation of the method is considered to manufacture a stand of wooden pegs. If you fulfill all the recommendations of specialists competently, such a device will be your faithful assistant for at least a few years. Pegs need to be driven into the ground around the bush. Use 4-5 pieces. Next to the resulting supports attach a wire or durable twine. Another similar way is the use of Rogatin. They are driven around the shrub, and then on top there are smooth branches. Very often, durable branches cut from fruit tree are also used as Rogatin.

Metal stands are considered in demand among experienced gardeners. To do this, use trimming of metal pipes. They play the role of pegs: they are riding the ground, and then the rails are attached to this design. All this is ultimately fixed by self-draws. The plastic backup for currant bushes is widely used. It is durable and with decorative appearance.

You can also apply in gardening and seemingly spoiled solar lanterns. The use of this material will allow you to build a completely stable design, but it will not work for too large loads. Nevertheless, if you need to install a backup for young currant shrubs, a plastic design is a good solution.

The most decorative and at the same time the standard is considered sufficiently strong pipe. They are recommended to cut into three identical parts. The rest of the material is converted into two circles. It is best to buy green pipes: Thus, the design you make will merge with green currant foliage. Remember: Currant on a homemade sleeper is an excellent solution for any gardener.

Video "Supports, Supports, Garters for Garden Shrubs"

From this video you will learn about how to independently do high-quality supports, support and garter for garden shrubs.

It would seem that there is nothing complicated in the cultivation of currant: planted a seedling and all, wait for the harvest. If you do not survive the plant with care, as well as full care, and certain requirements and neglected, you can not even count on abundant fruiting. Particular attention deserves the stage of formation of bushes on the site, for which such a device was created as a coat holder for currant.

Installation features

Stands for bushes in gardening are very important, experienced farmers are well aware of this. With the help of a simple device, you can arrange any, even the oldest and branched bush of useful berries correctly. Moreover, the use of carcasters gives such advantages as:

• the branches of shrubs begin to grow strictly up, they no longer lie on Earth, which allows the plant to fully develop, and the bush himself looks more attractive, because the shoots are no longer intertwined between themselves, and they are much easier to collect ripe fruits in the future with such a bush; In addition, after harvesting, it is possible to treat the ground around the currant without much trouble (disintegrate, make feeding);
• thanks to the ripening berries, ripening berries are not lowered - the fruits will always be clean, and they will not be raised from constant contact with wet earth;
• strong winds and shrines will deliver to shrubs at least harm.

Varieties

The appearance of the fences for berry bushes is different, since many daches do not consider it necessary to buy similar devices, and they are made by their own from those materials that cost cheap or are in free access.

Such rods are a good alternative to factory devices, although not always what has been done in handicrafts, it looks attractive. And it needs to be considered before proceeding to the construction of the fence for currants with their own hands. Nevertheless, whether it is a purchased product or done with your own hands, the best of plastic or metal stewed holders.

It is worth considering each type of more.

• Plastic holders We delight buyers acceptable worth, although budgetary devices for all the attractiveness of prices cannot impress reliable strength. As a result, the service life of such samples is quite small. Even during the installation process, it is easy to damage the fragile design: if you press it a little more or pressing, then the backup is deformed or, even worse - burst.

And if you leave such a holder in the ground for the winter period, in the spring you can see that under the influence of temperatures below zero plastic collapsed. True, there are models made from better material - composite, which will last much longer.

• Metal frames From above are processed by a special tool, so such devices are not only reliably protected from corrosion, but also have aesthetically attractive appearance. The main advantage of metal rods is their strength, and, therefore, a long period of operation. Such a garden inventory can not be removed for storage in the winter, although periodic installation and disassembly will not affect its condition. Forged elements on metal supports make backups for the works of art, an additional decoration of the land.

True, the cost of such a device is significantly more plastic, but the tools spent in this case should be considered as an excellent investment, as it will serve such a holder for a single year.

The material holder plays an important role when it is elected, but when buying a garden inventory this kind, you need to pay attention to its design characteristics.

• The number of "legs". The main supports can be a different amount. If the bush is scattered, big, it is better to choose a carcaletel for him with a maximum number of legs and, on the contrary, if the currant bush is young, it can not be written by a massive fence.
• The form of the backup. A portion of the carcruel, which directly supports the bush, can have a view of a ring, semiring, square, rectangle, triangle and other shape. There is no special difference, the main thing is that the chosen stand is harmoniously fit into the general view of the garden plot.
• Design solid or collapsible. If the time is lost, and the plant has been very branched, "to wear" a solid support will be quite difficult for him. In this case, it is better to use the structures that can be collected at any time and disassemble.

Requirements

For each gardener, it is extremely important that the plant, tied to the support, not only rejoiced the eye, and first of all developed well. That is why the supporting design must be selected correctly. It is worth considering the following requirements that are required to comply with support for bush plants:

• reliability and strengthb - the support should not be deformed under the weight of plants, and firmly stand in the ground;
• convenience - the support should allow the shrub to fully fill its inner space, nothing should look out for the edges of the holder, but also the grinds inside the fence should not be;
• practicality- In the outdoor points often offer customers although beautiful, meanwhile, unstable options for support, so sometimes it is more rational to make a steer holder;
• safety - buy or create a garden inventory is better from environmentally friendly, natural materials;
• attractive- creating an exterior of the land plot, do not forget that such auxiliary item, as a holder for berry bushes, should harmoniously fit into the overall idea.

Options for registration

Today, you can find different coasters for fruit and berry plant bushes, although in this form they appeared not so long ago. Mostly, gardeners for many years used homemade fences made from different materials. Some models of ripplers from non-professionals are simple and uncompressed, which do not require a lot of time and forces on the construction. The backup for currant makes your own hands is not very problematic.

Of course, such a garden inventory can be bought, but sometimes it makes no sense to spend extra money when an excellent frame can be done at home. The main thing is to determine the entire variety of possible options, which model will become the best for the existing currant bushes.

• Fence from pegs. Around the bush you need to score four kids (you can and more) so that it remains above the ground about half a meter of their length. Any girlfriend is tied to the first support: wire, twine, rope, thick fishing line.
• Holder of branches.On the perimeter of the currant bush, four thick horns of 70 cm are laughed. The basis of the support can be replaced with thick branches. The top branches are stacked on top. It seems such a design should resemble a braided fence.
• Metallic fence - This is the most long-life and reliable device for the backup of berry bushes. Make such a frame will not be no difficulty. You need to take 4 steel pipes, drive them around the bush, the upper holes to score fitting so that moisture does not get inside and extinct trash. The walls of the design can be built from what is in stock.

• Supplements for plastic pipe bushes. To create a fence, you will need fiberglass fittings, plastic pipes, pipe plugs. This design is obtained beautiful, durable, and most importantly - will last for many years. The manufacturing process includes the following steps:
  • from the pipes you need to cut 7 racks 50 cm long;
  • in each pipe, drill through a hole at a distance of 4-5 cm from the vertex;
  • turn through fiberglass fittings through the holes;
  • evenly score pipes around the perimeter of the bush;
  • align the reinforcement, closure to its ends;
  • install on all racks plug.

• Fender from metal-plastic pipes.A simple, but reliable coach for currant is easy to make metal-plastic pipes. To perform the framework of the following materials: metalplastic pipes, hose, screws, wooden pegs, screwdriver, perochy knife, hammer. The manufacturing process should be carried out as follows:
  • two rings of one diameter are constructed from the main pipe;
  • the ends of the pipe are connected by the segment of the rubber hose, while the pipes must be tight into it, do not hang and not fly;
  • from the same pipe, legs-racks are spawned approximately 80 cm high; so that the framework was stable, enough and three pieces (can be done more);
  • all holes of the racks are filled with bushings;
  • the first hoop is attached to the clogged wooden coach, it will serve as a top of the support;
  • the second round is fixed to the supports below.

• Another option of the coasters made by your own hands implies Collecting a garden without using screws.However, you need a soldering iron for polypropylene products. To make such a fence, you must perform the following actions:
  • cut from metal plastic pipe two pieces and make two hoops from them;
  • cut legs;
  • on the legs to wear fittings suitable in size and solder them with a soldering iron;
  • ready racks are attached to the metal-plastic pipe;
  • the pipe is put on the bush and connects to the rubberized hose;
  • for increased resistance, the rack is desirable to install it on the steel pins buried into the soil.

• Fencing of wood.Wooden stand for currant can be made with their own hands. It is worth remembering that all wooden products need to be treated with antiseptics, open with varnish or paint. All these activities extend the life of this design. It will take a wooden bar, paints and varnishes. You must perform the following steps:
  • 4 pieces of at least 60 cm long cut from a wooden bar length, one end of each detail is sharp;
  • four meter boards are cut off from the same bar;
  • the pointed racks are driven at the same distance (for a more attractive type of product) around the bush, the tops are attached to the upper ends.

In addition to the listed models of supports for currant bushes, craftsmen make carcases from automotive tires, hula-shepherd for sports, cycling chambers and other materials that can be found in the farm.

Review of the carcruel for currant see below.

Greetings, dear visitor!

In this post. I will tell you in more detail how to redo the carp keeper into a high comfortable design, which successfully holds the long branches of the currant bush, not to mention the short.

You know, In a bush, currant grows branches of different lengths and too long under the onslaught crop are driving through a low wrap of a carp and concern soil or mulch. And some branches are driving so that they are ready and break.

Shortly speaking, Of the two carcasters of different designs, I made one, but higher. True, as a result, the alteration of the co-holder was small nuances that I had to decide during the work. I will tell you about them too, so you do not have to think or specify how these problems decide.

So, If you are ready, I will start from the very beginning - training bush and about lower and upper hoop diameter Already a finished carpool.

In the photo below Already cropped black hoops with a tube and drill with a diameter of 20 mm. on metal.

In the next video I start drilling an extra hole in the tee of the lower carcaster, as planned.

But after fitting And inserts of vertical racks (tubes) in this tee it seemed to me that the racks themselves would be kept in unreliable, because the distance for them in the tee turned out to be too short. The point is that because the tee I turned to 90 degrees and the part that kept the hoop, should, in my opinion, the plan now keep vertical tubes.

Generally, The design would be unreliable, and therefore I began to think how to lengthen the size of the green tee (exactly of the part where the vertical tubes will be inserted) or replace it with something else, but suitable in size and constructive features.

The decision was found A few minutes later, and suggested to me his spouse. She proposed to go to the nearest village to the economic shop and buy a tee that is used in the installation of kapron pipes for water or heating. What we, by the way, did.

But before the trip I took a green tee with myself to make sure that the length of the purchased (kapron) tee would be more than green. After the saleswoman gave me a kapron tee in his hands, I compared it with "green", the sides of this were longer than 3 mm. In each direction - what I needed.

In addition The inner diameter of the kapron tee was 1 mm. Already (19 mm) than the outer diameter of the tubes (20 mm), which allowed vertical tubes to keep it much more stronger and more reliable.

Arriving again at the cottage, I drilled in the new tees holes in the same place where drilled in green. Only here arose a problem with the fastening of the tee itself when drilling. You understand what the matter is. At the same time dried, and it was inconvenient to keep the tee with his hands and unsafe, because in the very process of drilling the Kapron heated, and he could stick to the drill, and checked with him to inflict injury.

I got out of this situation simply. On the table, where the tee was supposed to drill, I nailed Parallel 2 Reiki so that the tees were placed between them and would be in the vice. You can drill holes in advance and use real vice or other clamping device for this procedure. I was at the cottage, and at my hands I did not have anything like this (I mean a vice), so I left the situation in this way.

Then, I processed the burrs that were formed from drilling by nozzles that you can see in the photo below. You can remove the burrs with a simple round file, nadfil, or on the extreme case with a conventional peer knife.

Then, It is time for dressing of these ready-made tees on the hoop of the first (green) carp. Just wear and drag the tees on the hoop will not quite easily, because the holes in the tees are straight, and the hoop bent. Therefore, in order to facilitate this work, I used lubricant ...

After the location of all tees on the hoop I started sticking into them the tubes from the upper coat holder, but before that I cut the cone part of the tubes at a right angle and sharpened the cut place on the cone so that the tubes were easier to enter the tee.

And since you remember That the inner diameter of the tee and the outer diameter of the tube differ in 1 mm., I used the same lubricant, but I had a little hurried and I had to do one and their work twice. So keep in mind - do not hurry and do everything right.

After that, As I inserted all the tubes from the top carcaster in the green hoop, I wanted to insert a ready-made design on the green tubes on the spot (directly on the bush), sticking out of the soil around the bush. And it was not there. I decided to pull the tube from the soil and collect the whole design completely on a hard surface and consolidate the junction seat of the green hoop.

You can bore The place of the hoop is not in one place, as I did, but in two places for greater reliability, if it is, it will be necessary. Here, look at yourself - do or not.

Now, As for the installation of this design on its legitimate (former) place, it is better, of course, here it is to produce together, as the assistant, somewhere will support the design itself, somewhere will correct the inclined branch, etc. In general, together easier and more handy.

In the photo below the final result of all works.

Here, in principle, and the entire procedure for reworking a carp. If you decide to redo your travel agents or you plan only to buy and install, then you have the opportunity to do everything qualitatively and right. Subsequently, your bushes will look not only compact on the part, but also to withstand the grown harvest in their branches without any gears, fesoms and damage.

Dear visitor If you had a similar experience on the alteration of plastic rods, then unsubscribe in the comments about this.

What if You have any suggestions, wishes or questions, I also ask them to express them in the comments to this post.

Before communication!

Yours faithfully,
Sergey Dyakov.

Ivan accents made a wide variety of trellis and pergolas on its site, which perform not only decorative, but also utilitarian functions.

Shalers and pergolas - structures, simple in manufacturing with their own hands, do not require a lot of time and materials for the construction provided, of course, a rational approach to this issue. On my summer cottage, these designs allowed us to ensure order, making care for plants convenient, and most importantly - do not take a lot of time to maintain them in-workers.

TRELLIS - A special lattice on which a plant is watched or to which ties the branches of trees to give them a certain form. Pergola. (ITAL. Pergola from Lat. Perquula - canopy, extension) - in gardening: canopy from climbing plants to protect the passage or terrace from the scorching sun.

• Pergola has a summer kitchen forms a green corridor on the way to the greenhouse.
• Decorative vineyard on the trellis at the entrance to the cottage.
• Wooden lattice attachments on the kitchen veranda.

What makes choplaresses and pergolas in the garden?

Materials for the manufacture of choler and pergol can be the most varied - brick, concrete, metal, plates, wood. If there is a desire to do something like your own hands, first of all it is necessary to determine the appointment of such a structure. For example, on my site (Fig. 1) -no how much such structures. Some of them are purely decorative: from the side of the entrance gates to the country, at the entrance to the house and before the kitchen canopy. Others are designed to grow white sweet grapes or to hide the economic buildings from the eyes (in summer kitchen) and as elements of recreation areas. And there are universal, combining all these functions - in the greenhouse, pool, kitchen.

Different designs pergol and chopler

Depending on the destination, I made different pergolas and trellis, which differ in design. Firstly, these are high, strongly resistant trellis of exterior fencing along the road and in the entrance gate. I made them from metal racks and stretch cables.

At the entrance to the house I built pergola using the used drainage pipes. Near greenhouses and summer cuisine - Trelliers made from thin-walled galvanized profiles, as well as lattice wooden attached. For shrubs, raspberries and blackberries, plants in the greenhouse and plenty roses made combined structures.

Pergola On Hot Summer Days successfully serves as a gazebo or shady canopy over garden tracks, where you can always enjoy cool. If the plot is large, then a few pergola and the choler installed at different parts of the site will create a beautiful landscape. And openwork decorative grids at any time of the year will be able to configure others on a romantic way and provide a good mood.

• Fig. 1. Placement scheme Pergol and trellis on the site: 1 - Trellier exterior fence; 2 - Trelliers for white grapes; 3 - pergola at the entrance to the house; 4 - Wooden lattices; 5 - supports for raspberry bushes; 6 - bastards for blackberry bushes; 7 - temporary support for the Topinambur; 8 - Slearman for plenty roses.
• Fig. 2. Device chopper outdoor fence: 1 - Rack of fence from steel pipes 0 80 mm; 2 - extreme racks of steel steel pipes 0 40 mm; 3 - intermediate racks with steel pipes 0 25 mm; 4 - steel cables in a plastic shell; 5 - Talpard; 6 - decorative cast iron sections of the fence; 7 - Cocole of boob stones; 8 - steel wedge.
• Grapes, rushed over the outdoor fence, practically hides the tag themselves.
• The tension of the cable on the trellis of external fencing with tallpins.

Fencing of the site do it yourself

The trellis installed on the top of the outdoor fence, the design is very simple. Since the racks of the fence are made of metal pipes 0 80 mm, I used them as a base, inserting the supports in them. Steel pipes 0 40 mm. In order to firmly fasten the pipe-support inside the rack of the fence, grated it with a metal wedge (Fig. 2). The length of the supports is approximately 2.5 m. Between the supports pulled the cables whose tension provided by Talrepa. Intermediate metal racks made of pipes 0 25 mm installed in approximately 3 m - this ensures the rigidity and stability of the design and prevents the deflection of the cable.

Pergolas for white grapes

White grapes compared to dark - less curly and less grows, and in yield weaker, therefore, the heat is less than the trellis. This made it possible to apply inexpensive galvanized light steel profiles for the manufacture of a chopper, intended for fastening drywall, and to ensure reliable opposition to a strong wind (we also have hurricanes), applied non-eroded, but reliable technical techniques.

The rigidity and stability of the design provide metal roof runs that redistributing horizontal loads into separate more powerful racks reinforced with steel pipes 0 4 mm (Fig. 3). An important role is also played by choosing a step between racks (approximately 80 cm) and a reliable connection of frame elements with self-draws.

The pergola racks installed in the pre-dug holes with a depth of 0.6 m, but did not concrete, but fell asleep with gravel with stones and rubbed. I needed to install these pergol for several hours.

Fig. 3. Device pergola
from steel galvanized profiles:
1 - racks from the profile; 2 - horizontal riglels; 3 - steel pipes 0 40 mm;
4 - self-tapping screw; 5 - cross beams from a lung profile; 6 - longitudinal runs from pipes and lung profiles; 7 - Stud with nuts.

Top view of lightweight pergolas, located between the greenhouse and need (separates the economic zone from the general).

Pergola at the entrance to the house do it yourself

This support for plants (Fig. 4) I made from water pipes 0 25 and 40 mm, but I use it as a scope, that is, forests for home maintenance (if necessary, wash or replace panels on the facade of the house). The bases of the racks in this design I concrete.

Temporary trellis

I have a temporary set set. I install them as needed and remove the autumn. These are trellis for Topinambur and individual bushes of climbing roses (Fig. 5). Topinambur height of 3 m and more with strong wind loses stability and falls on the lawn. To protect the Topinambur from the season, and the lawn - from fallen plants that are covered with mold over time, I put the support in about the end of July, when the plants rot the height of more than 2 m.

The design is simple and very convenient - this is a cable with hinges at the ends, which I raise the two steel rods (something like scrap is about 3 m. The rods are clogged into the ground at an angle of about 75 degrees, so when the cable is lifted, the required tension is ensured. Disassemble such a sleeper, sufficiently hit by a hammer on loop - and the cable itself falls to the ground.

Raspberry and blackberry

The supports for raspberries and blackberry bushes, I made from metal cables stretched between two horizontal guides (Fig. 6). Cables are stretched along each row of landings. Metal horizontal guides are attached to supporting pipes that perceive all loads. All metal structures from the used water pipes are 0 40 mm. Considering that I have a raspberry and blackberry bushes, I pulled the cables in two vertical tiers for each row: in this case support is provided with trunks and branches of both low-speed and tall bushes. Please note that it is necessary to reliably fix the extreme racks - to the ground to a depth of at least 1.2 m.

Greenhouse

The design of the plants in the greenhouse resembles the design of the supports for raspberry bushes and blackberries - these are the same cables stretched between horizontal crossbones (Fig. 7) in the ends of the greenhouse. For crossbar used steel pipes 0 40 mm. Approximately 2.2 m fixed at a height. At such a height, they do not interfere with the passage and works in the greenhouse. Scrolls are attracted by clamps to powerful greenhouse racks in the corners.

I stretch the cables, twisting the nut on the tensioner bolt. If we smoke the tension of the cable, then the tensioner can be moved along the crossbar. This ensures the exact position of the cables over the rows of tomato bushes or cucumbers. Garters of each bush from a durable thin rope are fixed on cables and serve as plants guide.

Each cable in two-three-places is tied to a metal farm greenhouse with thin knitting wire. This prevents the non-uniform deflection of the cable in the process of ripening fruit, when the consideant is also increased by the weight of the green mass of the bushes. I note that the height of tomato bushes reaches 2.5 m.
Summer cuisine trellis

Wooden mounted lightweight screens (Fig. 8) For a summer kitchen canopy, I made a wooden lining from waste. Screens Here - not only the decorative design element: they serve as a good windproof and support for curly plants.

It took me for several hours to manufacture and install all decorative solutions. The boards of the lining, I saw into two equal strips width 5 cm. Diagonal and framing slats connected nails (screws). To protect against atmospheric precipitation, all wooden elements covered with a protective impregnation on a lamp basis. To the details of the canopy (beams - at the top, the cast-iron fence - downstairs) was dripped with a metal ribbon and hooks from a wire of 6 mm.

Fig. 4. Pergola at the entrance to the house: 1 - the rack of the fence; 2 - pergola rack from pipe 0 80 mm; 3 - longitudinal run; 4 - Pergola beams from pipes 25 mm.

Fig. 5. Collapsible support for Topinambura: 1 - steel reinforcement 30 mm; 2 - cable.

Fig. 6. Scheme of support for raspberries and blackberries: 1 - rack made of steel pipe 0 40 mm; 2 - coarse from steel pipes 40 mm; 3 - cables in a plastic shell; 4 - Taldays.

Fig. 7. The framework of the frame for planting plants in the greenhouse: 1 - crossbar of the steel pipe 0 40 mm; 2 - cables in a plastic shell; 3 - device for tensioning the cable; 4 - Rigel Greenhouse carcass used for suspended structures from cables; 5 - knitting wire suspension.

Fig. 8. Decorative grille device for summer kitchen canopies: 1 - 50 mm wide strip; 2 - Lathe cutting from 50 mm wide planks.

Sleeler for plenty roses.

Flowers

For high vacation roses, we use several types of trellis. The most chassis - the tweer consisting of racing aluminum tubes (waste after the reconstruction of the greenhouse). The plastic grid is attached to them, to which I and I wave a plant.

In conclusion, I will say that all the designs I made, based on purely practical considerations. They do not claim a special design, but nevertheless in the spring and summer the entire area is in greenery, not yielding to the design of estates with expensive brand structures.