The system of heating of a country house with a closed circulation of the coolant for optimal operation must be equipped with steel panel radiators. Such a solution allows you to maximize the size of the room heating and reduce thermal inertia. Radiators Kermi FKO German production are already more than half a century with stable demand in their market segment and ensure reliable operation at low energy costs.

The North-West company offers high-quality Kermi steel radiators that are actively used for autonomous and centralized heating systems. Products are distinguished by excellent technical characteristics, convenient and safe in operation.

At the same time, steel panel radiators Kermi have an attractive appearance. In the standard version, the color of the products is white, other color is made to order.

The variety of models of bimetallic radiators of heating "Kermi" allows you to equip the premises even the most intricate configuration so that both the space is saved and ensure the necessary temperature mode. Battery width - from 59 to 155 mm.

Steel Kermi radiators are made of sheet steel. This is a durable and plastic material, well carrying various loads. Its products from it have an increased specific thermal power. The outer coating of radiators is lacquer, environmentally friendly, heat-resistant and durable. Specifications allow the installation of these products to one-tube and two-pipe heating systems.

The steel radiator "Kermi" FKO with side connection for mounting has four side holes with an internal thread of 4 × g 1/2. Reliable threaded compounds prevent the leakage. A wide selection of sizes will allow you to choose a product for an apartment, cottage or cottage, depending on the dimensions of the windowsill and window openings. The standard bundle includes a crane of Maevsky, a plug, a mounting kit for wall mounting. Radiators with lower connections are equipped with a thermostatic valve.

The new technology X 2 saves 10-11% on energy consumption. First, the front panel is warmed, and the rear panels are used as a screen, creating an effective heat exchange. Only if necessary, the additional heating of the rear panels is connected. Warming up the rooms with steel radiators "Kermi" THERM X 2 occurs 30% faster than ordinary flat radiators. If you add a low loss factor and high heat transfer, then we get equipment with excellent efficiency.

Kermi FKO radiators have lightweight installation, and the valves embedded in them will help in managing these modern high-tech devices that make our lives more comfortable and easier. Each product is equipped with detailed instructions, thanks to which the "Kermi" battery installation with the lower or side connections can be carried out independently.

Batteries "Kermi", the connection of which is carried out by side, also allow the installation of additional convectable lattices. This is done to increase the heat transfer panels.

Domestic heating radiators presented in our catalog are divided into three types: aluminum; Steel and bimetallic sectional batteries.

To help you with a choice, we will tell about the merits and disadvantages of each type:

Aluminum heating radiators are very popular among private house owners and apartments. They have excellent heat transfer, low weight and attractive design. The largest disadvantage of aluminum batteries is their sensitivity to the chemical composition of the coolant, which makes them unsuitable for use in high-rise buildings with a central heating system, where, together with water, salts and additives are added to the heating system, added to the utilities to prevent the risers. Also, in the process of operation, hydrogen is distinguished, which can lead to convulsion, and therefore, in the design, valves must be valves for strengthening excessive air.

Steel panel radiators can be used even at low heat carrier temperature, durable, energy efficient and characterized by richness of sizes. However, the pressure in them is usually low, which makes them unsuitable for use in high-rise buildings with the central heating system (with a standard pressure level in the system). But they are ideal for an apartment with autonomous heating.

In bimetallic radiators, all surfaces in contact with water are made of steel, and elements responsible for heat exchange aluminum. Such a combination of materials provides excellent heat exchange, the ability to maintain high pressure in the system, corrosion resistance. Bimetallic batteries are not demanding of the quality and chemical composition of the coolant, they are ideal for apartments in high-rise buildings, and will serve for a long time. The main disadvantage of such heating radiators is the price.

All models in the catalog have wall mounting and should be located at a distance of 7 - 10 cm from the floor, 10 - 15 cm from the windowsill and at 3 - 5 cm from the wall. The efficiency of the heating device depends on the correct location of the location.

What to take into account when choosing

Before buying a heating battery should be taken into account that heated 1 sq.m. The rooms with a height of 3 m need 80 - 100 W thermal power. Thus, the power of heating batteries in such a room should be 10% higher than the calculated one. If there are large windows in the room, the power must be 20% higher than the calculated one.

We have identified recommended retail prices on heating batteries that are broadcast by us from manufacturers. By making a purchase in our store, you can rely on the free shipping "to the house" in Moscow within the Moscow Ring Road, as well as inexpensive delivery in the city of Russia to the warehouse of the trading company or the point of issue. Also, deciding to buy a heating radiator for your home or apartment in Vodoparad, - you can count on a manufacturer's guarantee at least 5 years.

Kermi's heating panel radiators are one of the most valued and demanded models of heating devices in the heating devices market.

Radiators are made with excellent quality and are relatively inexhamable compared to similar models of radiators of other manufacturers.

Radiators have a modern design, a very compact device and high heat transfer. Low thermal inertia is also characteristic of Kermi.

From the analogues, Kermi radiators are distinguished by the fact that in their manufacture uses the innovative technology Therm X2, which increases the radiator efficiency by 10-11%.

Kermi radiators are the right solution for the need for your housing heating. These are modern, powerful, compact devices, have a quality guarantee. Each Kermi product is equipped with a side panel and an upper grille, painted by 2-speed white powder coating.

Included with radiators supplied plugs for reset air and brackets. Each unit is tested at the plant under pressure of 10-13 bar. Safe packaging reduces the risk of damage to the painted surface.

Radiators Kermi have a 5-year warranty from the manufacturer.

The number of the radiator panels is indicated in the marking and on the package:

• radiator type 10 - this is one panel
• type 11 - Panel with Orcher
• type 21 - 2 panels and one fin
• type 22 - 2 panels and 2 finments
• type 33 - 3 panels and 3 rows of fins

The variety of typical sizes of panel steel radiators permits to install radiators in any convenient place of the room.

So, the radiator 300x2000 mm can be mounted under the balcony window, and the radiator Kermi depth is 45 mm - in a small corridor or in the bathroom.

Steel radiators Kermi are used in residential buildings, high-rise buildings with quarter and central heating, as well as in apartment buildings with an autonomous boiler room.
Specifications of radiators:

• Radiator height Kermi - 300-900 mm.
• Radiator length - 400-3000 mm.
• Radiators are manufactured in one-, two- or three-layer execution.

Kermi radiators - customer reviews

"... I want to say a little about steel radiators Kermi. I have a Kermi FKV 220509 with a side connection, the heating is centralized, and I am very pleased with them. I installed the installation of radiators with Kermi with your own hands. They are at a price, of course, more than the other models, but more for our climatic conditions are suitable. The problem is that abroad in heating systems the air descends very rarely, and when air intake into radiators, their inner surface is not covered with corrosion and does not deteriorate.
And our practice of heating seasons shows that water in central heating, drainage occurs quite often, therefore any radiators rust faster, especially aluminum and steel heating radiators ... "

Sergey Ivanov 29 years old, Kolomna

"... I have a Kermi Profil panel radiators installed in the apartment - Ventil FKV. There are already five years old. One section flowed, so I had to disassemble and repair.
My radiators are connected from below, so that the pipes are not visible at all. The price difference for, say, a two-bedroom apartment in 15-17% (3-4 radiator - a small difference) is almost imperceptible compared to the repair of the apartment of the neighbors from the bottom, and maybe several apartments, it's how to try ... "

Alexey, Entrepreneur, Sergiev Posad

"... a steel radiator is good, but I like the tubular steel panels - it is easy to wash, rub, different color and very large dimensional and model range. Therefore, when the question arose about the choice of the model, I did not think about it for a long time - I bought radiators to Kermi FTV (FKV), this is a lateral connection, type 33, which means the largest size in all directions - width, height and depth, and two panels.
You can install both under the window, and it is possible and a simplicity of 2 meters high and a small width is easy to get around. If you pour antifreeze with glycerin into radiators, then anyone will serve for a long time. Such a coolant is not an aggressive and radiator from the inside does not pass. If the system is fill in conventional water, then it is necessary to add an anti-corrosion additive. ... "

Olga 38 years old, Serpukhov

Heating system is often needed heating radiators (heating batteries). It is they who carry out heat exchange between the coolant and the air of the room.

The company website offers a wide range of heating radiators, which are used in centralized and private heating systems:

● steel panel;

● tubular;

● bimetallic;

● Aluminum.

To choose the optimal batteries for a particular heating system, it is necessary to take into account the features of each type.

Heating radiators panel

Panel heating radiators are characterized by the ability to work with all types of coolant. The absence of gaskets and unnecessary compounds in their design guarantees the low probability of leakage during operation.

The selection of panel batteries is carried out not only on the basis of their length and height, but also depth. This is due to the fact that each model has a different number of heating elements and fins.

In the online store Website Panel heating radiators are represented by several trademarks: Kermi, Rifar, Buderus, Vogel, Korado.

Features of Kermi panel radiators

Batteries of heating Kermi are two plates with extruded vertical channels inwards intended for the passage of the coolant. To increase the efficiency of heat transfer in some radiators models there is additional fins from the outside.

A distinctive feature of Kermi panel radiators is a specific path that makes the coolant. So, at first it is heading to the front of the panel and only then to the back. Due to this, fast and uniform heating of the room is provided, where batteries are installed from the well-known German brand.

Buderus panel radiators

German heating batteries Budyrus are distinguished by a wide variety of models that are intended for both lateral and lower connections. Buy the Buderus panel radiator can each, regardless of the heating system used (single-pipe or two-pipe).

The process of producing heating batteries Buderus is fully automated, which guarantees high quality of finished products and its compliance with GOST standards.

In the catalog, the site has models of panels from 40 cm long to 300 cm and a height from 30 cm to 90 cm.

Panel radiators Vogel

Among the manufacturers of heating batteries, Vegel is distinguished by the unusual design design of its products. Vogel panel radiators are harvested exclusively from high-quality steels, which guarantees their reliability and efficient operation. And to ensure additional corrosion resistance of the Wogel battery inside are processed by a special composition.

Korado panel radiators

Battery Heating Castrad Czech origin. They are intended for work exclusively in closed systems, where the working pressure of the coolant does not exceed 10 CMS / cm 2. At the same time, the design of radiators is such that ensures maximum air patency.

In the online store, the site is represented by Korado panel radiators both with lower and lateral connections to the heating system. In addition, in the range there are batteries from one to the two-board design.

Radiators heating tubular

Tubular heating batteries are a classic option. Their design is made with steel pipes cooked with each other. Tubular radiators are an optimal alternative to aluminum counterparts. They can also be used in most heating systems: closed, open, low-temperature. A similar result is provided by using in the process of manufacturing special steel, which, with a thickness of 1 mm, is able to withstand the working pressure up to 12 kgf / cm 2. Consequently, tubular radiators can be installed both in private houses and apartments with centralized coolant feed.

On the website of the online store site you can buy tubular heating radiators in Moscow from Arbonia manufacturers, Zehnder Charleston and Irsap Tesi.

Tubular radiators arbonia

The model range of Arbon Heating Batteries are products that are perfect for use in apartments or private homes, schools, restaurants and other public places.

The width of the same section of the ARBONIA tubular radiator is 4.5 cm, and the number of pipes is from 2 to 6. The upper and lower collector is made of extruded steel. The height of the batteries ranges from 18 cm to 3 m.

Depending on the connection method, the tubular airborne heating batteries are lower and lateral.

Tubular radiators Zehnder Charleston

Tubular heating batteries Zender - these are the first radiators of such a form factor. Debut models of devices were released in 1930.

Zehnder Charleston tubular radiators are produced in five versions, the difference between which is enclosed in the amount of heated pipes per section: from 2 to 6.

The minimum battery length is 9.2 cm, and the maximum - 3 m. At the same time, their height starts from 19 cm and ends 3 m. Such a significant range of dimensions of Tubular radiators Zehnder Charleston allows everyone to choose a suitable model for specific operating conditions and a heating system.

Tubular radiators IRSAP TESI

Heating batteries IRZAN TESES are presented solely with the side connection type, which entails some restrictions on their installation. The radiator sections have a traditional width for this type of devices of 4.5 cm. The height of the batteries is characterized by a limited range: from 36.7 cm to 56.7 cm.

By default, the tubular radiators of IRSAP TESI are painted in white enamel, but the manufacturer under the order produces models in any color range of RAL standard.

The maximum working pressure for heating batteries IRSAN TESE is 10 kgf / cm 2, which is enough for both centralized and individual heating systems.

Buy tubular radiators in Moscow at a bargain price can be in the online storekermi - Fko .ru.

Bimetallic heating radiators

A bimetallic type of two metals radiators are made: steel core and aluminum alloy shell. The first material contributes to the withstanding of an increased pressure battery, which in multi-storey systems of apartment heating reaches 12 kgf / cm 2. Aluminum alloy is an excellent conductor of thermal energy from the coolant to the air of the room. Bimetallic radiators are distinguished by increased corrosion resistance and exposure to various chemical elements.

Bimetallic Rifar radiators

Domestic heating batteries Rhyphar are manufactured using a unique patented welding technology. It provides high reliability and durability of the design. At the same time, the price of panel radiators in Moscow is significantly lower from their foreign analogues, because production facilities are posted in Russia.

Get acquainted with the full range and buy panel heating radiators Rifar in Moscow can be in the online store site.

Due to the sectional structure of bimetallic batteries, it is allowed to change the number of sections directly during their installation.

Global Radiators (Heating Battery Global)

Bimetallic heating batteries Global regardless of the ruler can be installed in centralized and individual heating systems. Such universality is ensured by using a unique technology for manufacturing radiators.

Symbiosis of steel and aluminum allows you to achieve unique results of strength and calorificities. So, to change the temperature of the radiator Global, it will not be necessary to wait until it gets warm or cooled. The process of adjustment takes only a few minutes.

Depending on the modification, bimetallic heating batteries are distinguished by the following technical characteristics:

● height - from 20 to 80 cm;

● the size of one section is 8 cm;

● operating pressure up to 35 kgf / cm 2;

● Depth - 8-9 cm.

The service life of Global radiators is 20 years old, while the manufacturer provides its own warranty at 10 years.

Rifar radiators (RFAR heating batteries)

Bimetallic heating radiators of domestic production. The devices differ acceptable. Due to the use of special manufacturing technology, they are direct competitors of foreign manufacturers of heating techniques.

On the company's website, the site you can find four line battery rifar:

● Rifar Base radiators. Products from the base line are a golden middle between price and quality. Like other radiators of the company, they are collected from high quality metals. At the same time, the series includes three models of radiators: Base 200, Base 350 and Base 500, where the numbers correspond to the value of power in W. To obtain maximum battery performance from the base series, a specially prepared coolant with a minimum content of salts should be used.

● Rifar Base Ventil radiators. This is a modified version of the BASE series. Its singular difference is the presence of additional fittings for the implementation of the lower connection with the heating system.

● Rifar Monolit radiators. Made by monolithic technology. Here, the battery sections are combined with a welding, forming a single design. They are intended for operation in the most severe conditions. So, according to the manufacturer's application, Rifar Monolit radiators are able to withstand pressure up to 150 kgf / cm 2.

● Rifar Monolit Ventil radiators. As in the case of the base ruler, the "monolith valve" is a modified version of "Monolith" with additionally mounted connections for the lower connection.

Aluminum heating radiators

Aluminum radiators belong to the category of the cooler, which is due to the physical properties of the material from which the batteries are made. However, their use in centralized heating systems is not recommended, which is due to increased coolant acidity requirements.

A large cross section of intercoletory pipes makes aluminum radiators with excellent cast iron substitutes in heating systems with natural circulation of the coolant.

Aluminum has a small specific weight, which significantly simplifies the transportation and installation of radiators based on it. The aesthetic qualities of aluminum radiators allow you to install in almost any room, regardless of the designer stylization.

Global Radiators (Heating Battery Global)

Aluminum heating batteries Global in Russia are represented only by two rules: ISEO and VOX. This is due to the fact that it is they who are best suited for domestic heating systems.

The VOX series is classic sectional aluminum radiators Global. Despite the prefabricated design, they are designed to work under pressure up to 16 kgf / cm 2. High heat transfer (150 watts from 35 cm section and 181 from 50 cm) make it possible to effectively use heat coolant, even with a minimal number of sections.

Battery heating Globes ISEO is monolithic structures that are designed to work in extreme operating conditions. They not only perfectly withstand high pressure, but also due to the special fluoro-zirconium layer are less susceptible to corrosion and chemical influence. Batteries Globes ISEO can be used in systems with improper quality coolant.

Where to buy heating radiators for home

Inexpensive to buy heating radiators for the heating of private houses and cottages you can in our online storekermi - Fko .ru.

Permanent and wholesale customers - discounts and bonuses!

Heating radiators in Moscow with delivery throughout Russia.

We will always help you choose the best prices and materials.

Send any data on the mailkermi - FKO @ Mail .ru

The manufacturer recommends installing steel panel radiators exclusively in closed heating systems. Nevertheless, buyers with questions are often addressed to us: it is possible to install Kermi FKO 22 radiators in the apartment? However, it is definitely not possible to answer here, then explain why.

Kermi is a well-known manufacturer of panel and design radiators, heated towel rails, regulators, etc. Accessories for heating systems. For more than 55 years, the manufacturer has become an innovator in this area and managed to earn love and the confidence of buyers. And not even thanks to the essential technology of THERM X2, but rather due to the high quality of products, a long service life and most importantly - heavy-duty and environmentally safe coating of radiators.

The most demanded and popular model is the radiator Kermi 22 500 500. It is characterized by optimal technical parameters for heating the room of the midline and an acceptable price. Many are preferred radiators Kermi 22 type with lower connectionsSince this design allows you to hide communications to the floor.

Steel radiators in general and this model in particular are not intended for use in heating central systems. There are several reasons for this:

1. Steel Radiators Kermi 22. demanding of the quality of the coolant, i.e. It should contain the smallest amount of oxygen (up to 20 μg / dm3). If in the autonomous heating system to track this factor is possible, then in the central system it remains to be hoped for the conscience of the organization of housing and communal services supplying water. Unprepared water leads to corrosion and leaks.
2. The product is calculated for maximum pressure in the 7-10 atm system. In the central system, it just reaches these parameters. But with permanent operation at the maximum load mode, any equipment comes into disrepair faster. Thus, service life Radiator Kermi Type 22 It will be much lower than in autonomy.
3. The maximum temperature of the coolant, to which steel radiators of the brand Kermi - 110 degrees are calculated. This factor is also easily controlled in a private house heating system.