Devices to manage the NOBO presentation. NOBO ENERGY CONTROL: control convectors with one touch

Orion an intelligent electrical appliance control system. First of all, it is intended to control and control the thermal convectors of NOBO, but also possible lighting control, warm floors, and household equipment in your house in such a way that you can significantly reduce the cost of heating and electricity. Also using the ORION system, you can create the impression of the presence of a person in the house, even when you are not.


ORION 700 ORION 700 is a digital programmable device that can control all the wireless receiver (receivers) electrical systems in your house. ORION 700 transmits its control signals across the radio frequency signal (868 MHz). Therefore, for the reception of these signals, it is necessary to use convector with thermostats R80 RDC-700


Orion 700 Any additional electrical equipment you want to control using the ORION 700 must be connected through the so-called receivers-receiver, including and turning off the equipment at a convenient time for you. Each thermostat R80 RDC-700 and each receiver has a factory unique 12-digit number. Connecting each additional convector or receiver must be made this number in the ORION 700.


Orion 700 can control up to 100 areas independent of each other. Under the word zone, we mean one or more rooms or heating panels or electrical appliances operating according to a single specified mode during the day. For each zone, the profile can be individually created and programmed for 24 hours for each day of the week. So you have the ability to install 100 different programs Heating and other functions. The number of heating panels / devices in each zone is not limited.


Package "Standard" - is designed to install 220 volts to any phase. Includes devices: 1. ORION 700 - control unit (radio signal source). 2. Receivers R 80 RDC 700 et al. (Radio receivers) - control devices (heaters, lighting, etc) 3. GSM module - to control using SMS messages. (Option) 4. Radius of reservoir interaction with the main module varies Depending on the construction of the building (but not more than 100 meters). Sensitive to voltage jumps in the network. We recommend connecting through a domestic voltage stabilizer.


L N ~ 220 V Inner Temperature Sensor (T1) External Temperature Sensor (T2) GSM Module (Max 4 Zones) L N ~ 220 V Thermostat R80 RDC-700 Thermostat R80 RDC-700 Thermostat R80 RDC I zone .... ...... 100th Zone Number of heaters or receivers in the zone is not limited! (code example) (sample code) (sample code) (sample code) (sample code) ... 49th zone ... Orion 700 (MAX - 100 zones)


NOBO ENERGY CONTROL Power Control System is innovative approach In the management of power consumption and economy of electricity. Thanks to the NOBO Energy Control system, it has become possible to adjust the temperature, setting the necessary heat level at a certain period of time in various independent rooms. Thanks to the use of the NOBO Energy Control system, you can easily implement absolute control of power consumption in your home. Easy control is carried out using an application or wall switch, and the system update occurs through the application and software. Also, using the receiver running from the plug outlet, you can combine all electrical heaters and devices by connecting them to a single control system. The NOBO Energy Control system is compatible with the NOBO ORION 700 receivers, in addition to this, the possibility of compatibility with the RCE 700 wall receiver is provided. Starting using NOBO Energy Control System, you significantly reduce utility costs up to 25% or more!

Video Presentation NOBO ENERGY CONTROL

NOBO ENERGY CONTROL Compatible with convectors:

Principle of operation NOBO ENERGY CONTROL

  • NOBO EcoHub connects to your wireless network (router) or to network ports (RJ45). Thus, Nobø EcoHub binds to the application.
  • Next, NOBO EcoHub is associated with electrical heaters through signal receivers.
  • Signal receivers can be autonomous devicesthat can be connected to the power supply through the power outlets or devices built into the electrical heaters.
  • Applications can download the same with the App-Store (iPhone) or Google Play (Android smartphones)

NOBO ENERGY CONTROL power consumption system. Innovative I. simple system Management, thanks to which complete control over power consumption can be performed. Easily manage using a mobile application.

The NOBO power management system automatically controls convectors, lighting and other electrical devices In accordance with the individually established weekly program.

This system will help reduce electricity costs and will make your life more energy efficient without compromising comfort.

HOW IT WORKS

Adjusts the heat level by setting the most appropriate temperature for a specific period of time.

1. Different parts of the house can be controlled in different ways.
2. The new NOBO ENERGY CONTROL includes:

  • Central controller (NOBO EcoHub);
  • Wall block (NOBO ECOSWITCH) - option;
  • Appendix (Apple or Android) to control with a smartphone or tablet;
  • Thermostats with radio control for each heater.
3. NOBO EcoHub connects to your wireless network (router) or network port (RJ45). This allows NOBO EcoHub to communicate with the application via the Internet.
4. Then Nobo EcoHub connects to your heaters through receivers.
5. A receiver can be a device that connects to the outlet, or a module connected to the NOBO electrical heater.
6. The application can be downloaded to the App Store (for iPhone, iPad) or Google Play (for Android phones).

Why do you need to buy it

The new Nobo Energy Control is a simple and convenient management Convectors NOBO.

1. The new Nobo Energy Control provides you with complete control over the heating of your home.
2. Use the smallest energy consumption and reach maximum comfort.
3. Manage the system using applications (Apple and Android) or Wall Switch.
4. Update the system using the application and special software.
5. The system can be used to control lighting and any other devices connected through a socket.
6. Compatible with all ORION 700 receivers.


The main minimum system composition


Name Description

Price,
(rub.)



Nobo Ecohub.
Wireless system Office
The ability to control heaters
through the Internet.

16 500




NFC4N or NFC2N convector
The desired models are chosen



Thermostat (receiver) Installed on each convector



Thermostats (receivers) for convectors


Name Description

Price,
(rub.)



NCU ER
This receiver has no regulators.
Temperature settings Comfort and Eco are manufactured in the NOBO ENERGY CONTROL application.

4 690




NCU 1R
Temperature setting Comfort is performed on the receiver (heater).
The ECO temperature is set in the NOBO ENERGY CONTROL control system application.

4 000





Additional devices


MOBILE APPLICATIONS

QUESTIONS AND ANSWERS

Question: Can I use the existing NOBO Receiver?

Answer: Yes, if you use a receiver that works with the ORION 700 control system (issued since 2006). You will not be able to use NOBO receivers from older control systems.

Q: I can manage all types of heaters?

Answer: All types of heaters can be controlled using a socket receiver (NOBO RCE 700), but the best effect will be achieved using the NOBO heater with a built-in receiver (here includes built-in receivers of NOBO heaters manufactured since 1997).

Question: Can I control lighting with Nobo Ecohub?

Answer: Yes, the light control occurs using ON / OFF functions. There is also a way to mucify the brightness of light using the EcoApp application.

Question: Can I remotely control the heat level in my winter house with Nobo Ecohub?

Answer: No, but it can be implemented using the Internet and GSM / GPRS. IN currently We recommend using the NOBO ORION 700 in a bundle with Sikom GSM.

Question: No one in our family has a smartphone. What should we do?

Answer: You can install a simple switch on batteries on the wall (NOBO EcoSwitch SW4), which will allow each family member to control the system.

Question: Is it difficult to update the system when new functions appear in it?

Answer: No, when EcoHub is connected to the Internet, it can be easily updated. New version EcoApp can be installed from the App Store or Google Play.

Question: What amount of energy can be saved using NOBO Energy Control?

Answer: Studies show that you can reduce energy consumption for heating by 25% if you reduce the temperature at night and during the periods when you are at work / learning.

There are 4 temperature modes in the NOBO ENERGY CONTROL system:

  • "Comfortable". Configured the most comfortable temperature (23-25ºС);
  • "Economical". It is used if there are no people in the room - then the temperature decreases to 15-18 ° C and is supported at this level, and electricity costs are significantly reduced. It is convenient if the tenants, for example, went to work, but you need to maintain warmth in the house;
  • Mode of "non-freeze". Suitable for installation if there are no people in the house for a long time, but you need to maintain the minimum temperature (5-8ºС). Ideal when the tenants left from country house for the winter until spring, and you need to protect against the freezing of communication at home;
  • "All is turned off." This mode turns off the supply of electricity to convectors and electrical appliances, translating them into sleep.

With the help of the system, you can install the necessary temperature regime and maintain it, or switch to others if necessary. All control, settings and switching can be performed both in place and remotely using a smartphone. You can also set a schedule for a week or a month ahead to forget about the system - do not come to the house simply to monitor the temperature level, and even once again not to enter the application. All heating operates "independently".

In addition, if the difference in electricity happened - the NOBO ENERGY CONTROL system will save all the settings and restart the operation of the instruments.

Economy

The NOBO Energy Control system allows not only to effectively manage heating convectors, but also saves electricity due to the possibility of switching several temperature modes. The system increases or lowers the temperature depending on whether someone is indoors or not, man went on short term Or left the house for the whole season.

Thanks to the exact work of the convectors and the possibility of switching different modes, significant electricity savings are achieved - up to 25%.

The NOBO ENERGY CONTROL system works within the framework of your Internet package, without requiring additional costs, and consuming very little traffic. Therefore, the installation of the system pays for itself quickly and significantly.

Features and advantages of NOBO EcoHub

  • Just install and manage
  • Heating convectors work accurately and efficiently
  • In addition to convectors, other electrical appliances can be connected to the system.
  • You can manage both in place and remotely
  • In the system, you can configure the work schedule for many days ahead
  • There are 4 modes, each of which meets specific needs.
  • The system is economical and reliable

NOBO ENERGY CONTROL system is designed to adjust the electrical appliances, set the temperature modes, control them remotely through the smartphone or the Internet, program the work schedule, manage everything you need, and in place, and remotely

With the help of the system, you will provide complete control of electrical appliances in the house and greatly facilitate the process of operation and management itself. The system is easy to install in an apartment or a private house, it is especially popular for owners of country houses.

Manage technique in the house with the same single button - tempting the dream of many modern people. The abundance of household appliances with complex settings does not often simplify, but complicates our lives. Fortunately, technology does not stand still and leading world manufacturers carefully relate to their customers.

The Norwegian company has developed a unique control system for NOBO electrical convectors - the NOBO ENERGY CONTROL application. With it, you can program the mode of operation of convectors, control the temperature using the WiFi Nobo Ecohub module or the Nobo Eco Switch wall regulator, control power consumption and lighting. NOBO ENERGY CONTROL allows you to reduce electricity costs by 25%!

NOBO ENERGY CONTROL SYSTEM - Innovative development, which allows you to regulate the temperature remotely in one or several rooms.

To connect the system, it is enough to have a smartphone or tablet based on the database operating systems Android or iOS, Wi-Fi router (router), central control device NOBO ECOHUB or NOBO ECOSWITCH wall controller and thermostat or receiver 700 series at convector (R80 TXF 700, R80 RXC 700, R80 R80, R80 TCU 700). With the help of the R80 TCU 700 receiver, you can combine any heating devices And the "warm floor" in your home in a single system and control them at the same time. The system also allows you to additionally control lighting and other heating devices.

One touch, being anywhere, you can control heating.

Operating Modes NOBO ENERGY CONTROL

  • "Standard" - includes a weekly heating program
  • "Eco" - reduces the temperature at night and during the short-term absence of the owner
  • "Comfort" - sets comfortable mode Heating
  • "No" - protection against freezing with a long absence

A free Russified NOBO Energy Control application is available for downloading in App Store or Google Play.

Principle of operation NOBO ENERGY CONTROL

  1. NOBO EcoHub is connected by a cable (RJ45 connectors, twisted pair) to a Wi-Fi-Fi-Router Wireless Network. Using the NOBO Energy Control application, the smartphone connects to the NOBO ECOHUB system by Wi-Fi.
  2. With the help of radio signals of NOBO EcoHub radio signals binds to electrical heaters
  3. Any NOBO series 700 series thermostats can act as receivers. Thermostats and accessories of the ORION 700 system are interchangeable with EcoHub system

Presentations NOBO ENERGY CONTROL

© 02stroy.ru.